Mimosa branch of beads. Video: A variety of ideas for creating mimosa

25.04.2021

Today's master class from Bead is dedicated to Mimoz. We will weave the beautiful tree using the technique. Step-by-step photos show the entire scheme of weaving, it is not very complicated, and it is suitable for beginner masters in beadwork.

To weave mimos, we need:

Two bead colors - yellow, green.
Bead size will be required No. 12 (Chinese).
Wires for weaving with a diameter of 0.3 mm, 1 mm and from 1.8 mm.
Floral tape (Teip-tape).
Acrylic paint.

Weaving mimosa Let's start with her flower and twigs.

Breeding

On the segment of the wire with a length of 67 cm, we score 13 yellow beads, we have 5-6 cm from the edge and make a loop. After, twist it with eight, and then, having bent it in half, press the tight. It turns out a circular inflorescence cross on top.

Similar weaving make the third inflorescence. All of them do 10 or 12.

Now Holding the latest inflorescence, we have a residual wire along all inflorescences and start twisting with each other. To give the final type of brush mimosa, the inflorescences will arrange randomly in a circle.

All such brushes weep 36 pieces.

Leaves mimosa

On a length of 30 cm long and a diameter of 0, 4 mm we ride 16 green beads. Any tip of the wire is skipping through the last bead. I pull out to the end, forming a loop. The ends of the wires must be the same length.

Now under the loop, the fasteners of 86 cm of the wire with a diameter of 0.3 mm. Having driven over 18 bispers, fix it on the central wire, forming a loop.

On the contrary, we do exactly the same.

Weeping 9 rows of loops. In 10 row of the loop, we make from 16 beerin. In the last 11 row of 14 beerts.

Build a tree mimosa from beads

The assembly will start with the twigs. On the wire with a diameter of 1 mm Brepim to the very edge of 2 inflorescences. Catching a little floor ribbon, attach one more. Further, slightly wrapped, fastened the fourth inflorescence, we attach a leaf under it and turn the ribbon further. We collect such small twigs of 9 pieces.

Such large branches collect 3 pieces.

Now we combine two branches together, attaching them tightly to each other and wrapped a teip-ribbon.

For a couple of centimeters below them we join the third branch.

All the resulting trunk is winding.

At the bottom of the trunk, for his thickening, you can first wrap in several layers with painting scotch, and from above already ribbon.

After that, I give a shape, a little bent. We make a tree.

In conclusion, the trunk and coaching of brown acrylic paint. We are sprigs. On this, all, the Mimosa village is done.

Such a bright spring tree created by your own hands will be an excellent gift not only for spring holidays, but also for any celebration. The resulting mimo can be viewed in or video below.

Video Tree Mimosa Bead

Are a traditional gift to the International Women's Holiday. However, few people know that the names of "Mimosa" the inhabitants of our country call the Acacia silver, attributed to the subfamily mimosu. In nature, this plant can be seen on the southeastern coast of Australia, in Tasmania, as well as on the Black Sea coast of the Caucasus, but it is possible to admire his beauty at home, making Mimoz from beads yourself.

In order to make a bouquet mimosa from bead, It is necessary to prepare:

yellow and green beads,
golden Wire 0.3 mm thick,
green floral tape,
floral foam,
basket
scissors.

Master class on beading mimosa.

In nature, mimosa leaves consist of 8-20 pairs of elongated leaves. For the manufacture of one sheet, cut the wire 50 cm long, bend it in half, type 10 pcs. Green bead. The first beads to lower the bead in place, and through the rest, spend the second end of the wire.

Dial 10 more pcs. Beads and, bypassing the first, spend through the remaining 9 pcs. The second end of the wire. Multiple the turns of the leaves around their axis secure the product.

Gradually increase the amount of beads in each element and increase the number of leaves.

Make 7-10 leaves. Flowers of silver acacia in nature are very small and collected in 20-30 pcs. in a spherical head. In order to make a mimosa flower, slide the yellow beads on the wire so that it turns out a thread 50-60 cm long.

In this case, do not cut off the wire. Return from the edge of the wire 15 cm and make out of 5 pcs. Beaded loop.

So we got a spherical head of a flower. Make another 4 loops.

Do not cut off the wire from the scum do 5 loops and also collect them in inflorescence. Following the above principle, take 5-10 pairs of inflorescences, forming a mimosa meter. Fasten the wire and cut off.

Make a sweater smaller in size and attach to the first, wrap the wire with a floristic ribbon. The twig is ready.

Make 5-7 twigs. Assembly. Floral foam slightly mois, in order to avoid its sprinkles. Cut the shape with a sharp knife, the bases of which are equal to the diameter of the basket. The height of the figure can be arbitrary, but not less than 3 cm.

Crafts for students of grade 2

Master class assignment: Manufacturing a gift for the holiday of March 8, interior decoration.

The purpose of the master class:

1. Teach to weave the beads

2. Development of accuracy, creativity, aesthetic taste.

To create mimosa from beads, we will need:

Yellow and Green Beads

Green glass

Wire

Finishing

Acrylic Brown Paint for Staining Barrel

Step-by-step manufacturing process

First, from yellow beads weeping flowers.

We take a wire with a length of 60 cm and type 5 beads on it. We place the bispers about the middle of the wire. We make a loop from the beads and twist the wire for 4-5 revolutions.

One end of the wire is gaining more than 5 beads.

We are again made from the beads of the loop and tighten the wire for 4-5 revolutions.

On the other end of the wire we make the same loop. We twist together the ends of the wire on 5-6 revolutions.

Flower ready.

Such flowers need to do 30 pieces (can be more, if desired). We collect flowers two or three per twig.

We proceed to the manufacture of leaf of green beads and glass.

We take a wire with a length of 60 cm and score 1 bisery on it, 1 glass and 1 more beerinka. We place them approximately in the middle of the wire.

We take one of the ends of the wire and, holding a neglence to it, we skip this end of the wire through the glass and the second beerink in the opposite direction.

Tighten the wire.

Then, one end of the wire is gaining consistent glass and 1 beerink.

Again, holding a beerink, we skip the same end of the wire through the fibergus in the opposite direction.

Tighten the wire.

On the other end of the wire we make the same needle.

On both ends of the wire simultaneously type 1 beerinka.

Leaf ready.

These leaves need to be made 25 pieces (you can and more, if desired).

We proceed to the assembly of mimosa. The sequence of assembly depends on your imagination and whether it will be a bush or a tree.

First twist together flowers mimosa with leaves.

Then twist the resulting twigs form a top.

After forming the trunk screwing to it already twisted twigs.

Install the tree and decorate the stand.

Pupils of grade 2 for two weeks prepared a gift to moms.

Beadwork is a needlework with which you can reproduce various things in miniature, ranging from animals and ending with flowers as well as other crafts. This article will describe several master classes on weaving wonderful yellow mimosa., which is an invisible symbol of the arrival of spring, as well as a symbol of the well-known female holiday on March 8. You will be offered various beadwork schemes that can repeat even a novice lover of such art.

First, read the necessary list of accessories, which will be involved in this master class:

yellow and emerald beads;
thin wire;
threads of green or the same shade of Flor Tape;
flower pot, gypsum dissolved in water and decorative material for decoration.

Wire a wire long twenty-five centimeters. Then slide five beads and make a loop. Next, one centimeter should be retreating and make another five looping on each tip of the wire. One branch should have only eleven such curls. Now the main material fold in half and twist so that the first branch is formed. They should be approximately thirty pieces. Schematic drawing will demonstrate to you work.

Now we go to the beadwork of yellow twigs mimosa. They will differ in their structure from previous billets, as they will consist of double loop. Type five beads again and gluing two loops, tightly located each other. Again, retreat 1 centimeter and make another double loop. Yellow twigs should be made about thirty pieces.

Plant assembly passes easily and quickly. It will take three branches of one workpiece and as much the second. You need to group them so that we turn out only ten bundles. Connect them together and you will get a lush crown of yellow mimosa. Optionally, you can add some more woven branches of branches. Tree plant a potted gypsum solution when the exercise dried, decorate it with any decorative material, such as moss or pebbles.

Stock Foto Mimosa beadwork lesson

For this method, the creation of this spring plant will need the same list of materials as described in the previous lesson. The technique of weaving will be slightly different. Although it can still understand even newcomers. For a yellow branch, you will need not one cut of the War, but three. Twist them and work on six tips of the main material. Type five beads and run the rounded loop. Due to such a scheme, Mimosa will get much more magnificent and thicker.

Emerald color branches roll in another way. Take five beads on the wire and stretch it back, bypassing the last shot glass. Then take as many items and stretch the free edge again, only through all the beads.

The assembly of mimosa is identical to the one that has been described above in the text. You can not put a bouquet in a gypsum solution, but simply arrange it in a beautiful vase and put on the most prominent place in your apartment. Such an aircraft is so similar to its original that many will not immediately understand that it all woven from beads. After the whole theoretical course, we suggest you watch the video lessons, as well as other schemes, on the basis of which you can consolidate your skills and make a stunning product with your own hands.

For the manufacture of branches of mimosa from beads you will need:

green and yellow beads,
glass of green color,
wire with a diameter of 0.4 mm Green and colorless,
wire with a diameter of 1.0 mm,
floral ribbon or thread Moulin of green color.

We ride mimov from beads:

Production of flowers.
Cut a piece of colorless wire diacon.0.4 mm 1 m long.
Type 5 biserin on wire, place them in the center. Bend the wire with beads in the loop, twist the wire under the beads 2 turns.
Repeat 5 bisper on wire and twist the loop close to the first. Make another such loop.
Press all three loops to each other in such a way that the ball turned out (something like something). Twist wire under loops per 1 cm.

Return 1 cm on one of the ends and make the same ball as described above. Twist the wedges to the first ball.
In the same way, perform the ball at the second end of the wire. Twist the ends of the wire 1.5 cm.

Next, make balls at each end of the wire, twisting the wire between pairs of balls by 1-1.5 cm. You can position the balls not symmetrically to the main axis, but alternately.
Make the balls until the ends of the wire 6-7 cm long. Make a minimum of 3 such twigs.
Bend the wire with the balls from different sides relative to the central axis to give the sprig volume.

Production of leaves.
Cut a piece of green wire diameter 1 m long.
Type 1 bisper, 1 glass, 1 beerin. Place the first bisper in the center and go through the end of the wire through the glass and the second bead, bypassing the first. Tighten the wire.
Next, work alternately with each end of the wire.
To one end, dial 1 glassware, 1 bisper and just stretch the wire back, bypassing the first beerin.

Repeat the surgery at the second end of the wire.
Two ends on one turn and type 2 bispers on them (both end stretch through 2 beads). Advertise the beads close to the first row of the leaves.
Make a second row, gaining 1 beerin, 1 glassware, 1 beerin for each leaf. And again wear 2 bispers on both ends of the wire.
For the third row, type 2 bispers, 1 glassware, 1 beerin for each leaf. Glowing 4-8 rows as well as the third one.
9th row Perform as the 2nd, 10th - as the 1st. Do not forget to wear 2 bispers on both wires between rows.
Under the 10th near the ends of the wire twist.
Make minimum 3 such twigs.

Assembly.
Cut the wire rod to diaz.1.0 mm required length (the length depends on what the twig will be).
Screw the twigs with flower to the rod.

Cut the rod with threads of Moulin or a green-colored floristic tape (in tone to the leaf) by 3 cm.
Continuing to wrap the rod, take it alternately twigs with leaves at a distance of 1 cm from each other.
Cut the rod to the end, secure the thread with a piece of paint ribbon or a drip of glue.

Sunny spring twig Mimosa is ready!
Glowing 3-5 such twigs, and you will get a wonderful spring bouquet as a gift or for yourself your beloved! Rejoice and charge a good spring mood!