Fox from beads with their own hands. Bulk fox from bead fox from beads with their own hands

25.04.2021

Materials

wire 0.3 mm;
needle for beads;
foreway or nylon thread.

5th row - 2 black beads.

Figurine Fox is ready!

bighandmade.ru.

Lisa from beads with their own hands

The technique of volumetric weaving from bead in fact is a very simple scheme. By resorting to her, you can easily make any animal figurine. In this master class it will be a fox of beads.

Materials

To create fox figures from beads with your own hands you will need to prepare:

wire 0.3 mm;
beads number 8 orange, white and black;
needle for beads;
foreway or nylon thread.

Step 1. For weaving the Fox's body, a piece of wire is needed 130 cm long. The first line of the body will consist of the upper tier, and the volume weaving will start only from the 2nd row. Bring 1 black and 3 white beads on wire. White bispers will go to the top tier of the 2nd row.

Step 2. The end of the wire will skip through all the white beads and tighten it.

Step 3. For the Lower Tier of the 2nd Row, take another 3 white beads.

Step 4. Further weaving scheme looks like this:

Step 5. From the 16th row beats the tail of the fox.

16th row, upper tier - 3 orange beads, lower - 6 orange beads;
17th row, upper tier - 4 orange beads, lower - 5 orange beads;
18th row, upper tier - 4 orange beads, lower - 4 orange beads;
19th row, upper tier - 3 white beads, lower - 3 white beads;
The 20th row of the upper tier - 2 white beads, lower - 2 white beads;
21st row upper tier - 1 white bead.

On this, the tailings of the tail, in particular, the torso, in general, is over. Wire can be twisted, trimmed and fed.

Step 6. The ears of fox fox are very easy. They are triangles of three rows. In the lower row, 3 orange beads should be riveted, in the second below - 2 beads of the same color. Complete weaving follows 1 orange bead.

Step 7. All four fox paws are watered in the same way. The scheme looks like this:

1st row, upper tier - 2 orange beads, lower - 2 orange beads;
2nd row, upper tier - 2 orange beads, lower - 2 orange beads;
3rd row, upper tier - 2 orange beads, lower - 1 black bead;
4th row, upper tier - 1 black bead, lower - 1 black bead;
5th row - 2 black beads.

You can twist and trim wire.

Step 8. In order for the fox to keep the form better - by line with a fishing line or thread.

Figurine Fox is ready!

dEKORMYHOME.RU.

Lysteat volume and flat

Flat figures of foxes

Lisa Fox Bead

Lisenok (Fig. 109)

Materials: Round beads of red and white colors, one black and two green beads of the same size, 1.4-1.5 m copper wire 0.25-0.3 mm diameter, bead needle.

Production. The model is made by parallel weaving, only rows fall in two planes. Consider in more detail. To begin with, I type 2 white beads and place them in the middle of the wire. We ride 1 black beverage, we pass through it by the second end of the wire. In order to change the direction of weaving, stretch the ends of the wire again through a row of two white beads, but in the opposite direction. When weaving subsequent rows carefully read the description of the model and check with Figures 104 and 105, where the upper and lower rows of the fox are schematically depicts, respectively.

For the second row, we recruit 2 white bispers for one end of the wire, others pass through them. Then we tighten the wire until this row is on the same level with the first one consisting of 1 black bisper. After completing this series, two levels should be explicitly identified in your weaving: upper and lower. If this is not the case, it means that you have been tightened enough hard. The second lower row woves the same as the previous ones, it consists of 2 white beads. The next top row is typed from 1 red, 1 white and 1 more red bispers. And the corresponding bottom is from 2 red, 1 white, 2 red. In the fourth top row there are eyes (red and black beads): 1p1ch2p1ch1r.

And the lower row consists of 5 red beads. In the fifth top row there are ears. For their manufacture wept a row of seven red bispers. Then one of the end of the wire is gaining 5 red bispers, bypassing the last stronger. After that we pass the wire through the 2nd from the end. We have a small loop of 1 beads. We ride more 3 pink beads and spend wire through 3 medium bispers of the finished row. Then we perform the second ear. To do this, we also type 5 beads, make a loop and add more 3. Only this ear is fastened, hooking the wire through the nearest connection of the rows. It turned out that we have both wires turned out to be on the one hand, in order to return everything in a normal position, we carry out the wire end of the wire through the fourth lower row. Pay attention to the fact that the fifth bottom row is not.

The top sixth row is performed from 6 red bispers. And the corresponding bottom row is somewhat unusual: on both ends of the wire, 2 red beverages are riveted, and another 5 is put on one biserinka, only through them we pass through the second end of the wire in the opposite direction. The seventh top row consists of 7 red bispers. In Figure 106, you see the leaf body cross section, which corresponds to the upper and lower parts of the seventh row. This applies to the corresponding lower row, then here we have to perform leaf legs as follows. Weaving begins at one of the ends of the wire. We ride 3 red bispers, then 10 more beerinok, pass through the first 6 beads in the opposite direction. We had one leg with four fingers (bispers). Weaving continues in a similar way on the other end of the wire: We ride 3 red beads, then 10 more, we return back through the first 6 beads. At the end of this row, we ride 1 red, 1 white, 1 red bispers for one end of the wire, pass through 3 red bispers, which are riveted to the other end (are behind the leg). We pass through the middle and 3 bisers of the opposite part. Thus, the two end of the wire are located on both sides of the body of the fox.

The eighth top line consists of 6 red bispers. And the lower row is performed from 3 red, 3 white and 3 red bispers. The top rows (from the ninth to the thirteenth) are wearing the same (passing the two ends of the wire through the beads from different sides), they consist of 5 red bispers. The ninth and tenth lower rows are manufactured in the same way as the eighth, in the exception only: in them one white beerinka less than 11th and 12rd rows are the same, each of them rushes from 3 red, 1 white, 3 red beads.

The thirteenth top row consists of only 5 red bispers, but by doing it, do not hurry to begin to the top row, because we still have to weave the rear legs. To do this, we cling the wire for the nearest compound, we recruit 13 beerin, bypassing the last 4, pass in the opposite direction through the following 4 beads. Then the weaving unusual for toys begins (it was described in the chapter "Bracelet with your name"). If you are used to using a needle, then this is exactly the case when it is necessary to remember about it. We ride 1 red beverage, pass through the 4th biserin in the same direction, in which it first entered the wire (Fig. 107). Then we stretch the wire through the newly stripped beverage and tighten. After that, we put on 1 more beerinka and also fix it. As you understand, all such beery should be 4.Dee down with a wire on the nearest connection and take the place where the 14th top row should go. It consists of 3 red bispers, and the corresponding bottom out of 2. After the lower row is fulfilled, the wire ends in opposite directions (like when weaving the chain "Cross") through the average bead of the upper fourteenth row.

Now go to the manufacture of a fox tail. It woves the same thing as a torso. The upper 15th and 16th rows consist of 3 red bispers, the lower rows from the 15th to the 17th weave from 2 red bispers. The seventeenth top row consists of 3 red bispers. The tip of the tail should be white. For this, the upper 18th row will be made of 3 white beads, and the bottom - out of 2, the last top and bottom rows are made of 1 biserini. Including, but not the easiest stage of making toys - giving it a form. To do this, it is better to use a needle. Our main task is to "connect" all rows of each other. One of the ends of the wire, starting with the penultimate series, we make a loop (Fig. 108) around the wire between the 1st and 2nd 14th row beads. Tighten the wire firmly, go to the next row. Here we will do the loop around the connection between the 2nd and 3rd beads. Thus, pass through all rows of tail. Then the same fastening will be performed on the back. When the amount of beads increase, shift the location of the loop closer to the center. So we get to the head.

Next, we descend the wire down and in the opposite direction go through the very end of the lower rows. The location of the loop can change, it depends on how many beads in a particular row. The main thing is that it should pass in the middle of a number if the number of beery is even, or closer to it, if it is odd. The most important thing at the same time is to delay the wire strongly, but not to break it. The second end of the wire you can immediately cut off (of course, pre-fixing). Or, if you feel that one segment is not enough to associate all rows, then immediately start the connection of the lower rows by the second end of the wire. Now it remains only to straighten the figure (Fig. 109).

Source: Beading

Articles on the topic:

Santa Morozmk.1. We will need: 1.Beer (red, white, pink, black, one white or other color of the bead) 2. Will (better red) 3. Signboards 2. 1 row: upper tier - We recruit on any of the ends of the wire 4 red bispers 3 . The other end of the wire we skip through all the beads in the opposite

Animal Brecklis and Dogs Redhead Fox will need: red-made beads - small (about 9 mm in length) and large (about 12 mm in length), 8 tubers glass 5 mm long, small beads -0.5 g red, 10 white beads , 2 Green beerts (preferably long "cutting"), 1 dark beery, 55 cm wire.

Bat 2 Optional Mouse with Glass Bat Bat Materials: Round Black Beads, Two White (Fangs), One Silver (Nose), Two Red (Eyes) Burlies Round Forms of the same size, 1.5-2 m Copper Wire 0, 25-0.3 mm diameter, bead needle. Production. As and when weaving a piglet,

Redhead dachshund, a cat and a dog and a dog and a dog Red-haired dachshund: red, elongated beads - 1 small and 1 large, 4 glass tubes, bispers - 28 redheads (preferably "cutting"), 2 blue and 1 black, 45 cm wire. Holes in red beads should be wide, so that 3 wires passed through them. Slide on

Gray mouse 2 type-2 lips little gray mouse. Miniature souvenir or keychain. Such a product from the bead will be interested in weave the child. Diagram and job description you will find on the images. Gray mouse Materials: - Lesk about 1 m. - Beads No. 8 pearlescent black, dairy and blue colors; Bead diameter

Comments

mirbisera.com.

Fox from Bead

Lisa from beads with their own hands

In fact, the technique of volumetric weaving from a beautiful bead is quite simple. With it, you can make different animal figures. For example, red fox. We just need to stock with the necessary materials and patience!

We will need:

Wire 0.3 mm; - orange, black, white beads; - beaded needle; - nylon thread or thin line; - scissors. Hasha 1
The body of the fox wives on the wire. To this end, the author took a length of 130 centimeters. The first row of the body consists of the upper tier, we will start weave the volume only from the second row. Slide one black bead and three white on the wire. Thus, white bispers will go into a tier of the second row.
Skip the wire tip through white bispers, tighten how it did and the author of this master class.

Stay still three white beads for the second tier of the second row.
Next, we have a simple scheme, observing the color combination and the amount of beads. The third row: the upper tier is four orange bispers, the bottom - four white.
Fifth row. Upper - orange bead, black, two orange, black and orange. Nizhny - six white.

Fifth row. Tier top - eight orange, bottom - seven white. Soft row. Upper - nine orange + additional wire with a length of twenty centimeters, it is necessary to skip it through seven bispers located in the middle. Send nine white beads to the bottom, skip the extra pieces of the wire through a number, to bring it up. Upper - seven orange beerts, bottom - three orange, five white, three orange + extra wire 25 centimeters, pass it through white bispers of this tier. Upper - five orange, bottom - four orange, four white and again four orange bispers. A player row. The top tier is five orange beerts, the bottom - four orange, white and orange beads + wire 25 centimeters, again skip it through white bispers. At the same time. Upper - five orange, lower - four beads (orange + white + orange). Odinenth row. Upper - five orange, lower - four orange, three white, four orange. Dental row. Upper - again five orange, bottom - as in the eleventh step, only add the wire, having skipping it after five medium bispers of this tier. Paint row. Upper - Again, five orange, bottom - repeat the combination of previous rows, only without wire. Scheduled row. Upper - all without change, lower - three orange, white and orange beads + wire, skip it after five medium beads in this tier. The next row. Upper - already four orange bispers, the bottom - seven orange.

From the sixteenth row, the author began to weave the fox tail. Here, too, adhere to a simple scheme. Here the white beads are added for the tip of the tail, do not confirm! Sixteenth row. Upper - three orange bispers, the lower - six orange. The session a number. Upper - four orange, lower - five orange. The graduatest row. Upper-Snovy Four, the bottom - four. Akythdenth row. Upper - three white, lower - three white biserinkidvaded row. Upper - two white, lower - two white. Twenty first row. Upper - one white bead.
Here is the end of the tail and torso. Superior wire twist and fuel into the finished product.
Now the ears of the fox. These are triangles consisting of three rows. Take three orange bispers in the bottom row, in the second bottom - two. Of course, weaving must be completed with one orange bisery.
The legs of the animal weave the same, here you obviously do not confuse. Scheme is simple: the first row. Upper - two orange, the lower tier is two. The second row. Upper - two beads, the lower tier is two. The ranks of the row. Upper - two, the lower tier is one black. Quad row. Upper - black bead, the lower tier is a black. The pitched row. Two black beads. The wire is again twist and cut.

Previous fox from beads

Here is a bead crappy. Such a cute souvenir in the end turned out. If you wish, you can make a key chain and someone to give it. In general, master the beading, create unique crafts with your own hands and enjoy creativity!

Fits to MK:

Comments (0)

To write a comment you need to log in to the site through social. Networks (or register):

Information Visitors in the Guest Group cannot post comments on this publication.

rukodelie.usamodelkina.ru.

Fox from beads: master class and weaving scheme

Friends today we will tell you how to make a fox from beads. This will help us with two different schemes of weaving and a phased description of the weaving process.

Tools and materials Time: 1 hour Difficulty: 3/10

Flat Figure Fox:

wire;
round beads: orange, redhead, white and very little black;
lubes.

Volume Figure Fox:

wire;
nippers;
round beads: redhead, white and black.

Surely you will agree that the favorite wild animal of the city inhabitants is a tricky fox. Redhead Beauty with an elongated face and a luxurious tail conquers the hearts are not indifferent to the animal world of people. Let's not disappoint visitors to our miniature zoo and set in it a cunning owner of the middle strip forests. They guessed, who is it? Well, of course, fox from beads!

Fox weaving schemes from beads

According to the already established tradition, I place 2 schemes for you for the animal weaving, in this case foxes.

Flat figure

Below you will find a walling scheme of a flat fox figure of beads.

Start better from my head.
When the entire figure will be woven - join the ears, paws and tail.

Sweep not the necessary wire so as not to stick her ends.

Click to enlarge

Volume figurine

Below you will find a waveform scheme of a fox figure from beads.

Click to enlarge

As well as in the last figurine, gossip the foot and ears.
Bend the shape so as to give it the volume and form of fox.

Learn to weave the fox - it is not harder than other figures. Try and you will definitely get the same beautiful fox from beads.

Comments

pleteniebiserom.ru.

Crafts from bead animals

Beading is a great occupation for children and adults. This is one of the most beautiful and fascinating types of needlework. If you like beads, try to burst something.

For beginners of beads, it is best to start with the very Azov, from the simplest, namely, with flat figures. When the hands get used to weaving, you can try to make the volumetric crafts from beads in the form of birds, animals, insects, reptiles.

Of course, the volume figures make a little more complicated than flat. And nevertheless, it is not difficult to do them. When you try to gather the first bead animal into a single figure several times, you will make sure that it's easy!

In this lesson, we consider crafts from bead animals with foxes, crocodile schemes, crab and dogs. All these animals can be done with children in creativity lessons or at home.

Fox from beads scheme

According to such schemes, it is very clearly seen how to weave the fox. Beerki can be taken from another color, not like in the picture, and what you like. Such a toy will be very interested in playing a child.

It is worth noting that volumetric souvenirs from beads on weaving technique resemble knitting spins. Such a weaving allows you to create exactly the volume. Also, you can fill with a toy synthet and it will have a clear form.

Wonderful crafts from bead animals in the form of dogs, chanterelles, crocodile, birds and other representatives of flora and fauna can be made independently and with great pleasure.

Dog beads scheme

This is a wonderful dog can weave using brown, black and white beads. It is desirable to weave on a thin wire because the figure will be more dense and it will be convenient to play a child.

Develop Motoric Hands is a very useful occupation not only for kids and children of preschool age, but such a kind of needlework as a beadwork, moms will help to enjoy the hobby and a wonderful type of stress removal.

Crab beads scheme

The crab weaving can also interest the kids, especially since playing such toys you can talk about nature, rivers, seas and oceans, about those who live under water and on land.

For grinding, referring red bisers and two black eyes. Leske will make this toy more "alive", because the paws will move.

Animals, insects and reptiles can be placed not only on a thread, a fishing line, but also on a thin wire. Wire allows you to create a more rigid design, while the fishing line will make the beaded handicraft soft and flexible.

Crafts from animal beads can be used as decoration of clothing, hair rubber, hairpins, like brooch. Also, such toys can be done for a child to play them. The only one, you need to remember and be attentive mom in the fact that such toys have small components that children under three years old are not preferably played. On this, the toys from the beads are still playing for children over 3-4x years.

Crocodile beads scheme

For this original and almost the real crocodile, light green and dark green color of small beads will be required, as well as a booty shade for curls and bodies. Eye makes the same black. Teeth weave white. The wire will allow the toy stand on the paws.

But we will weave toys and jewelry with mean-sized girls can already have six-seven years old. If they like to make funny little men, make children's decorations, swelling something - support their children, because it is really very interesting occupation and useful for their development.

Also, amazing and beautiful funny animals will serve as beautiful souvenirs that can be decorated to decorate the house, you can weave and give to the holiday or weave just for yourself.

Animal weaving schemes will be very useful for those who wish to try themselves in this kind of handsome needlework. Very convenient in the schemes there is something that the color of the beads and the direction of weaving is indicated.

If you are looking for interesting schemes, then look at our article "crafts from bead animal schemes" maybe you will find something interesting and wears some kind of beautiful souvenir.

To the main

Support us! Click:

www.podelkidetkam.ru.

Tag: Lisa

The author of the competitive work: Kaplun Alina Hello everyone, I have long wanted to create a necklace, in which other interesting materials would be applied except beads. Also for a very long time I go around my piece of ribbon chibori, which I wanted to put in an interesting and original work. For this necklace, we ...

Competitive work author: Alina Rasalina Detailed description of the competition for the best master class Master class Embroidery chanterelle Bright fox in the color of autumn will be able to raise the mood even in the very sad weather. Therefore, in order for you and you have such a ...

biserok.org July 22, 2012 crystals, fox, dogs, owl, medium complexity, fullerene, turtles

Weaving animals from crystals Each toy is woven on the basis of the technique of weaving Fullerene (balls). In this method weaving there is nothing complicated, the most important thing is practice. Below the scheme of weaving a simple ball, well, if something is not clear to you, you can read more detailed article ...

Little Bear Lysenok for Weaving Chanterelle You will need: 1) Torso, foot - orange color; 2) eyes, nose - orange color; 3) tummy, tips of the paws - from white beads; 4) Lesketer with a diameter of 0.03 mm and a length of 150 cm. Production of chanterelles Start with ...

Foxes and dogs Redhead fox will need: red-made beads - small (about 9 mm in length) and large (about 12 mm in length), 8 tubers glass 5 mm long, small beads -0.5 g of red, 10 white beads, 2 Green bispers (preferably long "cutting"), 1 dark bead, 55 cm ...

Simple toys from beads. Weaving scheme: simple flat-parallel weaving technique opens up many opportunities. Mastering this technique, you can independently invent various figures. Volumetric Fish When performing a product, a parallel method of nose is used. Torch ...

Flat Figures Fox Weaving Scheme Fox: Volumetric Fox Beaded Fox (Fig. 109) Materials: Round Beads of Red and White Flowers, One Black and Two Green Beverages of the same size, 1.4-1.5 m Copper wire 0.25- 0.3 mm diameter, bead needle. Production. ...

biserok.org 17 February, 2010 Fox, horse, parallel weaving, medium complexity, souvenirs

Volumetric horses scheme weaving horses: Redhead fox We will need - beads of the tenth of the orange room for a torso, - white beads for tummy and curls, - 3 black beads, - a line 150 cm long. We start with the weaving of the ears we recruit 4 orange bispers, come back .. .

biser-plus.ru.

Animals from bead

Mini-animals are a very fun company, we will succeed if weaning donkey, zebra and horse together. It's really nice when even without experience in needlework, we can do something with your own hands so simple! All you need to take is beads of the right colors and wire! Carefully learn the scheme ...

Red crab woves from red beads on copper wire in parallel weaving technique. You still need 2 black bispers for eyes and that's it. Here is such a simple and pretty crab crab from beads. It will take: a large round bead with a diameter of 10 mm, 4 small elongated beads of 7 ...

Flat figures of animals are very simple products from beads, which are even the smallest needlewoman. For weaving, you need to take beads of the right color, depending on the selected toy and nove the wire. First, we glue the torso, and then attach the oval stall from pink ...

biserok.org 17 February, 2010 Fox, horse, parallel weaving, medium complexity, souvenirs

Flat duck, ducklings and spraying scheme of weaving spleen and ducks: There are no difficulty soaring such figures. Beads Turn on a wire according to the specified scheme. Volumetric Spiece To Estim Such a Spiece You need to take: - yellow beads - bright green beads - ...

Volumetric mice Flat Mouse Figure Mouse Mouse Musculos need beads of the tenth of the gray room for a mouse, 3 black beads, 12 white beads with a "defect" - shredded from sides, resembling narrow rings - for cohesives; Beads of the eighth room of any bright color for ...

Yellow Bird Required Material for Work: - Yellow Beads - Red Beads for Bead - Black Beads - Silver Beads - Wire Bird Weaving Scheme: Brying Technique, in which these products are wearing, called "parallel". Usually the wire is always taken, because ...

These small little souvenirs are wearing parallel appliances. Also, they can be suspended on the keys as a key chain or on a mobile phone as a souvenir. Basics of technology parallel weaving We offer to perform interesting products using the technique of parallel weaving and various ...

biserok.org 17 February, 2010 brown, parallel weaving, poultry, owl, average complexity, souvenirs

Volumetric Filin What is needed for work: - Beads Yellow - Beads Black - Beads Brown Two Shades - White Beads for Mordens - Wire Scheme of His Weave: Flat Figure Filin Required Material: - Bead Brown - Beads Yellow - Beads Beige - 2 ...

So our guest today is a leisure-volume animal of beads.

In principle, the weaving of the volumetric fox is not difficult, if you figure out the technique of weaving.

I met fox curious eyes

Praised the hemp brightly red light

And calmly observes:

Who walks in her forest?!

T. Efimova

New in the technique is that additional pieces of wire are used for foot and ears, which are inserted into certain places of some rows. Therefore, it is very important to read the instructions, look at the scheme, and all the incomprehensible icons and the lines will specify for yourself. Because There is nothing superfluous on the scheme for beauty. All icons show something.

For weaving, we will need a wire "" (about 1.8-2 meters), 4 pieces of wire with a length of 40 cm for foot and 2 lines 30 cm long for the ears. Orange beads (10-15 g), white (3 gr), 2 black beads for the eyes and one bead with a diameter of 3 mm for nose. If there is no beading - not scary. Just do the usual black bead.

Animals from beads. Lisenok. Weaving head.

1. For the middle of the wire, we put 4 white beads - 1 black bead - nose (bisperin) - 1 white beerin.

We do "" through 3 white beads. Carefully look at the scheme. Ends equal. The first rows must be exactly in the center. Otherwise, wire on the one hand may not be enough. Tighten the ends tightly.

2. We throw the ends of the wire from ourselves and the third row - from 4 orange bisperin weeping over next to the nose.

3. Recall the ends and the white "four" we make over the white "top". For those who have already tried to weave the volumetric animals :, Dolphin or and changing chanterelles should not be difficult and difficulties.

4. Returning a wire from a row in a row, make rows with eyes and white six.

5. Here is attention! Look at the scheme. For the first time it appeared a green line. If you have not cut off the wire for the ears of 30 cm long, now it's time to do it. Cut 2 pieces, since the ears - 2. But we will weave the ears right on the figure, each on these 2-wires.

Foots of chanterelles weave about the same way, so it is very important to understand this technique now. Then I will not stop in this detail on it.

6. One end of the wire (any) we put on 6 orange bispers, we felt the second end in them "towards". The ends slightly pull up but do not drag to the end. It is important that the series would remain straight.

7. We produce a cut-off wire through 4 medium bispers of a number as shown in the diagram, align the ends and for a while they forget about them.

8. Now tighten the row to the end. We do not forget that it is necessary to pull for each end according to separately (not at the same time in 2), to give the head shape. You can also help with a pencil, inserting it a sharp part of the head and frightening the bottom and the top of the pencil, that the head was volumetric.

Let me remind you that black lines show a change of rows. The top row is the top of the figurines, the lower, respectively, the bottom.

10. The latter on this scheme is orange seven, we do the same as the six with an additional wire. Those. We wear a row, we do not make a hearty, we have done an extra wire. Please note that this time we only do through 3 medium bispers. This is done in order to slightly deploy the ears on the head of the figure.

Animals from beads. Lisenok. Weaving ears.

Pay attention to the scattering scheme of the ears. In the diagram, black strips are indicators of the change of rows are located through 2 rows. This means that the ears are scattered. If only single rows were between the black lines, then this part of the figure should be plane.

So, in our weaving head, there are 2 wires and 4 end, on which we will weave the ears.

Careful with the very first next. Because Wires are not fixed, then when tightening, they can drag into one direction. Therefore, the first row do not tighten tightly. We like it as follows during the tightening of the first row of the second ear.

First we put on 2 white bispers. We felt the second end, as usual, tighten the ends. White inner. Therefore, after it, the wires we throw to the outside of the head and weave the orange triple.

We throw off the wires inside 1 white beerink, we reckue 2 orange weeping again, and again inside the last orange bisper. Uhko is ready. It remains only to fasten the ends in broach. The second ear scales the same as the first. Only here you need to threaten to pull the first row that the ears would not hang out.

Lisenok. Weaving torso and paws.

11. In the next row of the circuit, we see a green line again - it is inserted with a laptop weaving. Taken in 5 medium, white beads. The row is shown in the diagram a little apart that would be clearly clear how the wire passes. In fact, of course, it should be tightly shifted. This is a series of 3 orange tumors - 5 white - 3 orange. Take the ears in the row not tightened to the end. And then it is tightened. Do not forget about the shape of the body, watch it was not flat.

12. Orange five-spin.

13. Weave according to the scheme until another row, when you need to insert the second paw wire.

14. When weaving the paws, after inserted the second wire, it is necessary to weigh a couple of rows. Otherwise, in the process of weaving the paws, the rows can disperse and an ugly hole is formed in the toy.

15. All 4 paws weave the same and volume. The paw diagram is shown below, since there was more space. The foot consists of four double rows. The latest row of white sock.

16. After the paws are woven, fix the ends of the wire and gently cut up more superfluous.

18. We carry out the figure according to the scheme, ending with a white tie tilt. Wire ends carefully fix and cut.

Our animal of bead Fox is ready.

Here is such a cute animal we turned out. \u003d)

Go to the final part of the fox weaving. It remains very slightly, you have already done the main work.
You can always return to and if something has not happened.

21st row: only the upper tier - 1 white bead.

Fox Body Weavered. Tighten the main wires. Spend wires through the beads of the upper tier of the penultimate row,

Bend the tip of the wire and hide it between the rows of beads.

Side view of Fox at this stage:

We proceed to weaving the ears of fox. Both ears are the same, we will weave them using a flat parallel weaving technique according to the following scheme: 1st row: 3 orange bispers. In order not to pull the wires when tightening, you can weave in the 1st round one ear, then in the 1st row another ear and then weave all other rows of both ears.

2nd row: 2 orange beads. 3rd row: 1 orange bead.

Ears are finished. Secure and cut off the extensions. Bend the wiring ends and hide them between the rows of beads.

The 2nd row is the same: the upper tier: 2 orange beads. Nizhny tier: 2 orange beads.

3rd row: upper tier: 2 orange beads. Lower tier: 1 black ball.

4th row: upper tier: 1 black ball. Lower tier: 1 black ball.

5th row: only the upper tier - 2 black beads.

Fix the wire. Spend anyone end of the wire through the supreme row of the upper tier

then twist together both wires and cut them out.

In order to make a figurine red cute fox from bead, It is necessary to ride the middle of the wire 7 biserin and through 4 of them to produce a wire twice so that its ends come out from different sides of the extreme beads of the row. It turns out the 1st and 2nd row of tail. Generally chanterelle, like, woven from the tail.

3rd row: to drive four bispers to one of the ends of the wire, and the other end to turn through them, directing in the opposite direction. The following rows are wearing in the same way, only the amount of beerin in the ranks changes:
4th row - five bisper;
5th row - six bisper;
6th row - seven beery;
7th row - seven beery;
8th row - six bisper;
9th row - five bisperin;
9th row - four beads;
The 11th row is four beads;
The 12th row is three bispers;
The 13th row is three beads.

After weaving the tail we go to the weaving of the fox torso.
1st row: on the right end of the wire rolling four beads, the left end of the wire to turn through these beads in the direction from left to right.

2nd row: to drive four bispers to one of the ends of the wire, through which then turn another free end of the wire, directing it in the opposite direction. The following rows also rush, only the amount of beads changes in each of the series:
3rd row - seven beery;
4th row - seven beery;
5th row - nine bisper;
6th row - eight bisper;
7th row - ten bisper;
8th row - eight bisper;
9th row - ten bisper;
10th row - nine bisper;
The 11th row is ten bisper;
12th row - eight beads;
The 13th row - nine bisper;
14th row - seven beery;
15th row - eight beads;
The 16th row - six beads;
17th row - seven beery;
The 18th row is six beads.

From the 4th row you need to weave the ears. For the manufacture of the right ear, it is necessary to drive five beads to the right end of the wire and turn it through the extreme right bispers of the 3rd and 4th rows. Similarly, the left ear rushes: on the left end of the wire rolling five beads and turn it through the extreme left bispers of the 3rd and 4th rows. Then continue the weaving of the head:
5th row - five bisper;
The 6th row is five beads, while the 2nd and 4th beery should be black (eyes);
7th row - three beads;
8th row - two beads;
9th row - two beads;
The 10th row is one bisper of black (nose).
The remaining ends of the wire close. At the end of weaving heads go to the manufacture right back leg. Six bisperin on the middle of the wire, through two extremes of them to turn the wire twice - it turns out the 1st and 2nd rows.

3rd row: Take two bispers for one of the ends of the wire, and the other to turn through them so that it goes from the other side of the row. The following rows are also made with the following amount of Beerin:
4th row - two beads;
The 5th row is two bispers;
6th row - three beads;
The 7th row is three beads. Attach the paw to the 3rd and 7th rows of the body, after which you can move to weaving left back paw. It woves the same as the right, while the amount of beads in the ranks should be as follows:
1st row - three bispers;
2nd row - three beads;
3rd row - two beads;
4th row - two beads;
The 5th row is two bispers;
6th row - two beads;
7th row - four beads.

In order to make right front paw, It is necessary to drive four beads to the middle of the wire, while through one of them to turn the wire twice in different directions so that this beerin is over three others. It turns out the 1st and 2nd row. Continue like this:
3rd row - one bisper;
4th row - two beads;
The 5th row is two bispers;
The 6th row is two beads.

Attach the paw to the beads of the 16th and 18th rows, after which you can weave left front paw. The amount of beads in the ranks should be as follows:
1st row - two beads;
2nd row - two beads;
3rd row - two beads;
The 4th row is one bead;
The 5th row is one bisper;
The 6th row is three beads. At the end of weaving the left rear paw, the loose ends of the wire close.

Liser weaving scheme:

Lisa Fox Bead

Lisenok (Fig. 109)

Materials: Round beads of red and white colors, one black and two green beads of the same size, 1.4-1.5 m copper wire 0.25-0.3 mm diameter, bead needle.

Manufacture. The model is made by parallel weaving, only rows fall in two planes. Consider in more detail. To begin with, I type 2 white beads and place them in the middle of the wire. We ride 1 black beverage, we pass through it by the second end of the wire. In order to change the direction of weaving, stretch the ends of the wire again through a row of two white beads, but in the opposite direction. When weaving subsequent rows carefully read the description of the model and check with Figures 104 and 105, where the upper and lower rows of the fox are schematically depicts, respectively.

And the lower row consists of 5 red beads.
In the fifth top row there are ears. For their manufacture wept a row of seven red bispers. Then one of the end of the wire is gaining 5 red bispers, bypassing the last stronger. After that we pass the wire through the 2nd from the end. We have a small loop of 1 beads. We ride more 3 pink beads and spend wire through 3 medium bispers of the finished row. Then we perform the second ear. To do this, we also type 5 beads, make a loop and add more 3. Only this ear is fastened, hooking the wire through the nearest connection of the rows. It turned out that we have both wires turned out to be on the one hand, in order to return everything in a normal position, we carry out the wire end of the wire through the fourth lower row. Pay attention to the fact that the fifth bottom row is not.

The top sixth row is performed from 6 red bispers. And the corresponding bottom row is somewhat unusual: on both ends of the wire, 2 red beverages are riveted, and another 5 is put on one biserinka, only through them we pass through the second end of the wire in the opposite direction. The seventh top row consists of 7 red bispers.
In Figure 106, you see a leaf body cross section, which corresponds to the upper and lower parts of the seventh row.
As for the corresponding lower row, here we will have to perform a leaf legs as follows. Weaving begins at one of the ends of the wire. We ride 3 red bispers, then 10 more beerinok, pass through the first 6 beads in the opposite direction. We had one leg with four fingers (bispers). Weaving continues in a similar way on the other end of the wire: We ride 3 red beads, then 10 more, we return back through the first 6 beads. At the end of this row, we ride 1 red, 1 white, 1 red bispers for one end of the wire, pass through 3 red bispers, which are riveted to the other end (are behind the leg). We pass through the middle and 3 bisers of the opposite part. Thus, the two end of the wire are located on both sides of the body of the fox.

The eighth top line consists of 6 red bispers. And the lower row is performed from 3 red, 3 white and 3 red bispers.
The top rows (from the ninth to the thirteenth) weave the same (passing the two ends of the wire through the beads from different sides), they consist of 5 red bispers. The ninth and tenth lower rows are made in the same way as the eighth, after only an exception: in them one white beerkin less.
The 11th and 12rd rows are the same, each of them rushes from 3 red, 1 white, 3 red beads.

The thirteenth top row consists of only 5 red bispers, but by doing it, do not hurry to begin to the top row, because we still have to weave the rear legs. To do this, we cling the wire for the nearest compound, we recruit 13 beerin, bypassing the last 4, pass in the opposite direction through the following 4 beads. Then the weaving unusual for toys begins (it was described in the chapter "Bracelet with your name"). If you are used to using a needle, then this is exactly the case when it is necessary to remember about it. We ride 1 red beverage, pass through the 4th biserin in the same direction, in which it first entered the wire (Fig. 107). Then we stretch the wire through the newly stripped beverage and tighten. After that, we put on 1 more beerinka and also fix it. As you understand, all such bispers should be 4.
Next, fasten the wire on the nearest connection and take the place where the 14th top row should go. It consists of 3 red bispers, and the corresponding bottom out of 2. After the lower row is fulfilled, the wire ends in opposite directions (like when weaving the chain "Cross") through the average bead of the upper fourteenth row.

Now go to the manufacture of a fox tail. It woves the same thing as a torso. The upper 15th and 16th rows consist of 3 red bispers, the lower rows from the 15th to the 17th weave from 2 red bispers. The seventeenth top row consists of 3 red bispers. The tip of the tail should be white. For this, the upper 18th row is made of 3 white beads, and the bottom - out of 2, the last top and bottom rows are made from 1 beerini.
Final, but not the easiest stage of making toys - giving her shape. To do this, it is better to use a needle. Our main task is to "connect" all rows of each other. One of the ends of the wire, starting with the penultimate series, we make a loop (Fig. 108) around the wire between the 1st and 2nd 14th row beads. Tighten the wire firmly, go to the next row. Here we will do the loop around the connection between the 2nd and 3rd beads. Thus, pass through all rows of tail. Then the same fastening will be performed on the back. When the amount of beads increase, shift the location of the loop closer to the center. So we get to the head.