Crochet green hat

Crochet openwork hat

Crochet summer pink hat

An openwork hat will serve you not only as protection from the sun, but also as a beautiful decoration for your head. The hat is crocheted with an openwork and at the same time quite dense pattern.Size 56
For knitting a summer hat, it is better to choose light-colored yarn with a 100% cotton content. We need 100 g of yarn 125m / 50g thick and hook No. 2.5.

The hat is knitted according to the scheme, starting with a ring of 8 air loops. From the 1st to the 11th row, the bottom of the hat is formed, from the 12th row we begin to knit the sides of the hat, knitting the 20th row, try on, if it seemed to you that the base is not deep enough, knit 2 more rows, repeating the 19th and 20th th row. Next comes the tight binding of the edge with 3 rows of art. b/n. From the 24th row we begin to knit hat fields. In the last row, you can tie st. b / n wire or regilan (whalebone) for greater field tension.

Having finished tying, starch the hat, pull it over a suitable shape and dry it. According to your desire, since the hat pattern is quite dense and holds its shape well, it will be enough to starch the hat fields a little in a quick way: dilute a spoonful of starch in a glass of cold water, wet the fields with this solution and iron them through cheesecloth until dry.

Summer hat (adult)

In order for the cap not to expand downwards, turning into a beret, the parts highlighted in red in the diagram must be knitted without air loops!

hat with flower petals

Summer air hat "MAK".

The hat is tied to the bag.
It was for this hat that the MAK was knitted. So the name of this hat was "born" by itself.

The poppy is tied with elongated loops and is wrapped around the edge with a crustacean step. For decoration, black beads are tied into the stamens of the poppy.

The bottom of the hat. Beginning of knitting.

For the bottom of the hat, I took the motif from the Fashion Magazine as a basis.
Appendix No. 8 (477). In the course of knitting, I changed the motif to the sizes I needed.

To give shape to the edge of the hat, I knitted a fishing line.

The hat is tied. It remains to shape it...

The hat was shaped with gelatin.
Dissolve 1.5 packs of gelatin in a glass of warm water. Melt the gelatin over low heat. I cooled it down a bit and soaked my hat in it.
Then the hat needs to be slightly wrung out and pulled over the form until completely dry.

CAP FOR GIRL HOOK.

Crocheted summer hat.

Size: 54
To knit a hat you will need:
100 g of white cotton yarn;
20 g cotton yarn yellow;
hook No. 0.85. DESCRIPTION
Start knitting with one chamomile according to pattern 1 and pattern 2.
According to scheme 1, complete the core of the flower with a yellow thread. Next, knit 12 petals according to scheme 2 with a white thread. Connect all the petals together as follows: when the last petal is completed, then, without breaking the thread, take the 1st petal and tie it on three sides of the st.b / n (one long side, rounding and the second long side). So connect all the petals to each other sequentially one by one. When the entire chamomile is tied along the contour, perform the second row of tying st.b / n. Sew the core in the center of the chamomile. Tie the chamomile petals around the edge:
1 p. - 10 v.p. between the petals, 2 st.b / n along the top of the petal;
2 p. - 3 v.p. rise, knit a sirloin net, alternating 2 ch. and 1 st.s / n throughout the row;
3 p. - 3 v.p. lifting, 2 st.s / n under the arc of the previous row, 1 st.s / n in the column of the previous row, 2 ch, 1 st.s / n in the same column of the previous row, 2 st.s / n in the next arc of the previous row, 1 st.s / n in the column of the previous row, 2 ch. and so repeat until the end of the row;
4 p. - fillet net (like 2p.). Knit the crown of the hat with a pattern according to scheme 3. The number of rows depends on the desired size of the hat. Tie approximately 16 p.
For the brim of the hat, tie 11 daisies. These daisies have 9 petals. You need to connect 11 daisies for the fields in the process of knitting them. In order for the daisies to lie correctly in a circle, make a template according to the size of the circle and connect the daisies on this template. When all 11 daisies are connected and interconnected, proceed to the connection of the fields and crown of the hat. Choose a method convenient for you and connect the details with a hook or a needle and thread. Along the edge of the hat, connect the petals with each other with chains of VP. and st.b / n.

Who would have thought that you can crochet a hat! Despite the imaginary complexity, even beginners can do it within one day. This is a primordially female accessory, so in our article we will consider various ways of knitting hats for girls and little girls who do not want to lag behind fashion.

Crochet photo of women's hats

Women's hats, knitted independently, look incredibly elegant. With such a headdress, you definitely will not go unnoticed. Look at the photos of finished works from professional craftsmen, perhaps very soon you will become the owner of such an original and cute hat.

Children's options are no less beautiful. Headdresses of little fashionistas can be decorated as you like. Pineapples, violets, roses, daisies and berries are ideal.

Master class and description of crochet hats

In childhood, many girls were jealous of their dolls, because they had such beautiful hats. Now you can make your dream come true and become the owner of a trendy and modern headdress.

Our master class is dedicated to the creation of a small children's model with improvised fields and a satin ribbon as an additional decoration. Openwork knitting makes the product airy and soft - ideal for the summer season.

To get started, choose the right thread color. You can take any patterns, but we suggest using ours if you do not yet have experience in knitting such products. Our description will help you understand if something is not clear.

The amount of yarn depends on the size. But, given that we are knitting a model for a girl, 100 g of cotton threads will be enough for you. To work, use hook number 2.

At the very beginning, you need to tie a simple chain of air loops. Attach it to the circle. The next row consists of three lifting loops and 30 columns with crochets. Then again you need to make a rise, and then knit, alternating two air loops and one double crochet. In the third row there will already be 44 double crochets.

Now take a look at the diagram. It shows how to knit further. Just follow the instructions and soon you will be able to enjoy the beautiful pattern. You should end up with a large dome with connected openwork petals. It must be carefully starched and turn the fields outward. Then you need to thread the satin ribbon into the lace and tie it with a beautiful bow. This completes the work, and you can already show off a brand new hat in front of your girlfriends.

We create a crochet hat with large fields: diagram and video

The hat in the previous master class has very small fields. If you like a model with large edges, you will have to use a wire frame. The fact is that starch will not overcome the severity of the knitted pattern, and the fields can quickly drop, and the product itself will lose its appearance.

For knitting, you will need white cotton yarn, at least 150 g. Work begins with 6 air loops, which are connected into a ring. Knit the next rows according to the pattern shown below.

Once the hat is ready, attach the wire frame to it, giving it the right shape. It would be desirable to additionally starch the product and put it on the form.

Another interesting lesson is offered on the video. You don't need a pattern to make this hat. Its author comes up with patterns on his own. Just listen to the recommendations and see how to knit a hat correctly. The beauty of the finished product can be enjoyed after a few hours of effortless work.

Photo of hats in retro style, with large brim and lace

Women's hat can be made in any shape. Recently, retro-style products have been in special demand. We offer several options for hats of this type.

In the summer, you need to carefully protect your face from the sun. A beautiful hat with large brim will help you with this. In it you will be like a real English lady at the Queen's reception.

According to this pattern, the first 5 rows of the hat are knitted - the bottom. I will give a description, as given in the diagram, for 18 STCH = 18 wedges. I write, as I understood and knitted myself.
1 row. Dial 4 air. etc., close them in a ring or make an amigurumi ring so that the hole on the top of the head is not visible. Next, we knit 3 air. lifting point, 17 STSN in the ring, connecting loop in the 3rd air. lifting item. At the end of the row, you get 18 sts.
2 row. 3 air. lifting and in the same column we knit a embossed facial column (in this scheme only facial embossed columns are used, as they fit, see above in the photo), then we knit in the next column of the previous row - 1 STSN and 1 embossed column in it, so to the end of the row. At the end of row 36 stsn.
3 row. We start the row with a relief column (with a connecting loop we pass to a relief one). 3 air. lifting point (beginning of the first wedge), then 1 stsn (into the next loop of the previous row), and then we knit 1 embossed column into the embossed column of the previous row, where we had 3 air. lifting point, i.e. to the beginning of the first wedge (shown in purple in diagram 2). Further into the next relief column (the beginning of the second wedge) - 1 STCH, then 1 STCH (into the next loop), and then 1 relief column at the beginning of the second wedge. So we knit to the end of the row. At the end of row 54 stsn.
4 row. We start a row with a relief column (the beginning of the first wedge) - 3 air. lifting, 1 stsn (in the next loop), then we knit 1 embossed facial column in 3 air. lifting point (beginning of the first wedge), 1 stsn. Next, work 1 dc into the next crochet (beginning of the second wedge), then 1 dc, 1 crochet into the beginning of the second wedge, 1 dc. So we knit to the end of the row. At the end of row 72 stsn.
5 row. We start a row with a relief column (the beginning of the first wedge) - 3 air. lifting point, 1 STSN (into the next loop), 1 relief column in the first 3 air. lifting point, 2 stsn (in the next 2 loops, in each one stsn). Further, in the next embossed column of the previous row (the beginning of the 2nd wedge), we knit 1 stsn, 1 stsn (in the next loop), 1 embossed facial column at the beginning of the second wedge, 2 stsn. So to the end of the row. At the end of row 90 stsn.
6 row. We turn to scheme 1. In this row, in the middle of the wedge, instead of one STSN, a relief column is knitted (drawn in blue on the main diagram). I knit like this. The beginning of the row from the place where the relief column was (the beginning of the first wedge) - 3 air. lifting item, 1 STSN (in the next loop), 1 relief column in 3 air. lifting point (to the beginning of the first wedge), then 1 stsn (into the next loop), and then we knit 1 stsn and 1 relief column (blue hook in the diagram) in one loop - we knitted the first wedge. Next, we knit the second wedge (skipping one loop): 1 stsn in the next relief column of the previous row (the beginning of the second wedge), 1 stsn (in the next loop) and 1 embossed column at the beginning of the second wedge, then 1 stsn (in the next loop), then in one loop we knit 1 STSN and 1 relief column. Further, to go to the 3rd wedge, you need to skip one loop. So about knitting you need 18 wedges. At the end of row 108 stsn.
After the 6th row there are no increases!

Next, we measure the diameter of our circle, if it turned out to be the diameter we need (see the table), then we continue to knit according to the scheme 1 - 7th and subsequent rows. If the diameter of the circle is too small, then you need to continue knitting rows with increments (according to scheme 2) until we get the diameter we need!

7-N rows - hat tops. Crossed columns are knitted in these rows. It is better to start a row with STSN, which goes to the relief column. In each subsequent row, you need to move one loop forward with a connecting loop, due to this, the relief tracks will go diagonally, and the beginning of the row should always be obtained from the STCH, which goes to the relief! At the beginning of the row - 3 air. lifting in the sts of the previous row, then you should have a relief column, but first you need to knit 1 stsn in a double crochet, which comes after the embossed column, and then tie 1 embossed column into the embossed column of the previous row, then 1 stsn and again a crossed column: first 1 stsn in stsn, which goes behind the embossed one, and then we knit 1 embossed column into the embossed one. So until the end of the row, due to such a crossing, our relief columns will go diagonally. At the end of this and subsequent rows, there should always be 108 sts! Thus, we knit as many rows as you need in height (keep in mind that the last 2 rows are still knitted with decreases) - this will be the crown of the hat!
N + 1 - a series of crown reductions. We start from the place where you ended the previous row - 2 air. p., 1 unfinished double crochet (into the next loop), then knit together 2 air. p. and an unfinished double crochet (common top), then 1 embossed st in the same embossed st of the previous row - we knitted the first wedge. Then 2 stsn (one double crochet in each next loop), and then 1 relief column in the same relief column of the previous row - this is the second wedge. Then decrease again: 2 unfinished double crochets with a common top (we knit one unfinished double crochet in each loop), then 1 relief column into the relief column of the previous row. So we knit to the end of the row. At the end of row 90 stsn.
N + 2 - a number of crown reductions. 3 air. p., 1 embossed column into the embossed of the previous row, then 2 unfinished double crochets with a common top, 1 embossed column, 1 STCH, 1 embossed column, 2 unfinished double crochets with a common top, etc. until the end of the row. At the end of row 72 stsn.
You can reduce immediately in one row by tying 2 unfinished double crochets between the relief columns with a common top!
Hat brim. According to the scheme, 9 rows of STBN fields are knitted. In the 9th row, every 4 stbn 5 and 6 stbn fit together! The number of rows of fields according to your desire. Tie the fields with a crustacean step or come up with something of your own!
The hat is ready! Make a trim on the hat and you can conquer all passers-by with your beauty

Through trial and error, I came to the conclusion that it is better to knit such a hat model with thick yarn in one thread (100-230 m in 100 gr.) Or in 2 threads (150-200 m in 50 gr.), Hook No. 4 -5! Due to this, she gets such an interesting shape, it was not in vain that the scheme was drawn (by the Japanese or Chinese) for 6 rows with increments, and then without increments! For such a model, yarn "Alize LanaGold", Pekhorka "Children's Caprice" in 2 threads (personally tried), Vita "Brilliant" in 2 threads (personally tried), acrylic (depending on the footage, look in 1 or 2 threads to knit) and any other yarn, just look at the footage and already adjust to it!

According to the scheme, you need to knit 18 STSN = 18 wedges in the first row, I tried for 18 wedges, it turns out that it “excites” a little, so I will initially knit 14 STSN = 14 wedges in the first row! I started knitting with my own threads, only in 2 threads and I am already satisfied with the result

The beginning of my knitting. I knit in the same way as described above, only for 14 stsn = 14 wedges, so below I gave how many stsn I got at the end of each row!
1 row = 14 stsn
2 row = 28 stsn
3 row = 42 stsn
4 row = 56 stsn
5 row = 70 stsn

Having connected the first 5 rows, the diameter of the circle was obtained = 14 cm.

The diameter of the circle turned out = 17 cm, what you need

Next, I will knit 7 and subsequent rows, as I wrote in the description for the 7th row without additions with crossed columns. Tied the 7th row, the circle began to round off. As you can see, it is rounded to the front side, do not be alarmed, continue to knit further, when you have more rows of tulle connected, it will wrap on the wrong side!

From the 8th row I will change the thread to melange!

My dear girls! Quite by chance today I went to a yarn store and saw this yarn RAM LUX BOOKLET (50% acrylic, 30% wool, 20% viscose) 280 m in 100 g - in one thread it’s just fine. Now I’m thinking, can I knit the rest of the hat with such yarn? Tell me please! I will try to knit a row like this, and then I will take a picture of the row that was originally, and you write to me in the comments how it looks better!

Option number 1 - connected 2 rows of RAM. This is how it looks

Option number 2 - 2 rows are connected from YarnArt Crazy Color, which is at the beginning in the photo. This is how it looks

I still chose the first option and, in principle, I am satisfied with the result, as it turns out

Melange thread turned out 9 rows (without the last 2 rows with decreases), and only 16 rows = 17 cm

Then she knitted 1 row of decreases: between the embossed columns she knitted 2 unfinished columns with a crochet, knitted together (in one row she combined 2 rows of decreases of the scheme). The bottom of the crown is pulled up and sits well on the head. In total, it turned out at the end of the row 57 STSN. It turned out to be 18 cm in height. I have 7 rows connected with a blue thread, and 10 rows with melange. There are 17 rows in total.

I knitted the fields like this (I didn’t change the hook number, knitted the same)
1 row. The whole series of STBN.
2 row. In the first loop of the row - 1 STBN, in the second loop of the row - 2 STBN (increase). So knit to the end of the row.
3 row. The whole series of STBN.
4 row. In the first loop of the row - 1 STBN, in the second loop of the row - 1 STBN, in the third loop of the row - 2 STBN (increase). So knit to the end of the row.
5-8 row. Knit without increments STBN!
9 row. Tying with a crustacean step. The crab step is single crochet stitches that are knitted from left to right!

I did it: 7 rows of fields are connected with a melange thread, and the 8th row is connected with a blue thread + 9th row - finishing with a crustacean step is also a blue thread (a crustacean step was knitted in one thread, in two it turns out roughly)!

Pigtail. How to tie a pigtail, which is in the hat photo, was suggested by YuYumka for which many thanks to her. We knit 4 air. lifting, in the first loop we knit 1 stsn, 1 air. p., 2 stsn. We unfold the knitting, with a connecting loop we pass to the middle, i.e. to the place where the air was. p. and under it we knit 3 air. lifting point, 1 STSN, 1 air. p., 2 stsn. Next, we unfold the knitting again and repeat the same thing. So we knit to the length we need!
You can see options for other braids above in the diagrams for model No. 6!

I knitted a flower according to the last color scheme in the post

Here is my complete set with a scarf

hat with a flower

This is an approximate diagram of the hat. That is, the hat is divided into two parts. Tula and fields. They need to be knitted separately, and then sewn together.
I was asked how to make the brim of the hat be "standing"? For myself, I found only one way out - regelin! Or a very thick line. Regelin, (two or three meters long) I “gut”, that is, I pull out these elastic elastic “threads” from the thread sheath, twist them into the diameter I need and begin to tie around the edge, gradually reaching the middle. That is, the place where the fields connect with the crown.
The crown and fields were steamed under a damp thin cloth. I steamed the tula on a three-liter jar.

I don’t have a clear scheme, with calculated loops. I knitted everything intuitively. Yes, if you knit with a crown, it won’t work out very differently ... After all, everyone’s heads are different and you need to knit according to the shape of a particular head.
It was this hat that I knitted with single crochets, But you can safely and openwork "let it go." Flowers to taste, who likes what)))
Well, in general, something like this)))) if I explained something indistinctly, then ask in the comments, I will

Yes help))))

black hat

Red hat.

Women's hat crochet.

Simple in execution and, at the same time, an original women's hat will decorate a woman of almost any age in the cool season.

Women's hat crocheted from yarn, which includes 100% acrylic, (170 g / 288 m.) Idea and MK from the Internet.

For knitting, dial 2 air loops.

1st row: knit 4 tbsp. b / n in the 2nd loop from the hook = 4 columns (do not turn)
2nd row: 2 tbsp. b / n in each column = 8 columns.
3rd row: 2 tbsp. b / n in each. Art. = 16 Art.
4th row: * 1 tbsp. b / n next. st., 2 st. b / n next. st., repeat from * along = 24 st.
5th row: * (1 st. b / n in the next st.) - 2 times, 2 tbsp. b / n next. st., repeat from * along = 32 st.
6th row: 1 tbsp. b / n next. st., 2 st. b / n next. st., * (1 st. b / n in the next st.) - 7 times, 2 tbsp. b / n next. st., repeat from * - 3 times, (1 st. b / n in the next st.) - 6 times \u003d 36 st.
7th row: (1 st. b / n in the next st.) - 4 times, 2 tbsp. b / n next. st., * (1 st. b / n in the next st.) - 8 times, 2 tbsp. b / n next. st., repeat from * - 3 times, (1 st. b / n in the next st.) - 4 times \u003d 40 st.
8th row: 1 tbsp. b / n next. st., 2 st. b / n next. st., * (1 st. b / n in the next st.) - 4 times, 2 tbsp. b / n next. st., repeat from * along - 7 times, (1 st. b / n in the next st.) - 3 times \u003d 48 st.
9th row: (1 st. b / n in the next st.) - 5 times, 2 tbsp. b / n next. st., * (1 st. b / n in the next st.) - 11 times, 2 tbsp. b / n next. st., repeat from * - 3 times, (1 st. b / n in the next st.) - 6 times \u003d 52 st.
10th row: (1 st. b / n in the next st.) - 2 times, 2 tbsp. b / n next. st., * (1 st. b / n in the next st.) - 12 times, 2 tbsp. b / n next. st., repeat from * - 3 times, (1 st. b / n in the next st.) - 10 times \u003d 56 st.
11th row: (1 st. b / n in the next st.) - 4 times, 2 tbsp. b / n next. st., * (1 st. b / n in the next st.) - 6 times, 2 tbsp. b / n next. st., repeat from * - 7 times, (1 st. b / n in the next st.) - 2 times \u003d 64 st.
12th row: 1 tbsp. b / n next. st., 2 st. b / n next. st., * (1 st. b / n in the next st.) - 7 times, 2 tbsp. b / n next. st., repeat from * along - 7 times, (1 st. b / n in the next st.) - 6 times \u003d 72 st.
13th row: (1 st. b / n in the next st.) - 5 times, 2 tbsp. b / n next. st., * (1 st. b / n in the next st.) - 8 times, 2 tbsp. b / n next. st., repeat from * - 7 times, (1 st. b / n in the next st.) - 3 times \u003d 80 st.
14-25 rows: art. b / n in each. Art. along.

Plank:
26-28 rows: 1 in / p, art. b / n in each. Art. along (knit only for the far loop)
29th row: 1 in / p, art. b / n in each. Art. along (knit as usual - for 2 loops)

Visor:
30th row: (1 st. b / n in the next p.) - 2 times, 2 tbsp. b / n next. p., * (1 tbsp. b / n in the next p.) - 9 times, 2 tbsp. b / n next. p., repeat from * - 7 times, (1 st. b / n in the next p.) - 7 times \u003d 88 st.
32-33 rows: art. b / n in each. Art. along.
Finish work.

Strap binding:

Connect the thread at the beginning of the 26th row and knit like this: art. b / n in each. Art. along (knit for the nearest loop).
Repeat for the 27th and 28th row.

Women's hat crocheted decorated with a bow.
Bow:

cast on 4 air loops.
1st row: art. b / n in the 2nd p. from the hook, art. b / n along, turn = 3 tbsp.
2nd row: 1 in / p, 1 tbsp. b / n in the first paragraph, 2 tbsp. b / n next. p., 1 tbsp. b / n in the last. p., turn = 4 tbsp.
3rd row: 1 in / p, 1 tbsp. b / n in the first p., (2 tbsp. b / n in the next p.) - 2 times, 1 tbsp. b / n in the last. p., turn = 6 tbsp.
4th row: 1 in / p, art. b / n in each. Art. along, rotate
5th row: 1 in / p, art. b / n in the first paragraph, * skip the next. p., Art. b / n next. p., repeat from * - 2 times, art. b / n in the last. p., turn = 4 tbsp.
6th row: 1 in / p, pull the thread from under the first arch (2 p. On the hook), skip p. pull the thread from under the second arch (3 p. On the hook), then knit the loops together.
Finish work.
From faces. sides, knit along the opposite side of the bow: 1 in / p, art. b / n in each. p. \u003d 3 tbsp.

Repeat rows 2-7
finish work

Bow center: 6 in / p in the ring
1st row: 1 in / p, art. b / n in each. P.
2nd row: 1 in / p, art. b / n in each. P.
finish work

Assembly:

Thread the bow into the ring of the center of the bow, sew the bow onto the placket, as shown in the photo. A wonderful hat for autumn is ready! Wear it with pleasure!

Crocheted spring hat for women. Description in English, there are diagrams.

WHITE HAT
You will need: 120 g of white bulk yarn (50% wool, 5% acrylic, 200 m / 100g), hook number 4.
Tie the bottom of the hat Art. b / n on a classic cap with a diameter of 18-19 cm.
When performing the cylindrical part of the hat (crown), enter through 3 rows of art. b / n rows of "crustacean step". Knit a tulle with a height of 9-10 cm, constantly trying on.
For the fields, increase in every 4th loop (2 p. In one) one row. For small fields, 7 rows of art. b / n and strapping with a “crustacean step”.
Newspaper "Knitting hats".
Master's advice. There are a lot of options for decreasing loops on the top of the cap. In each case, it depends on the chosen pattern and the shape of the top of the cap. The less often the decrease, the sharper the top of the cap becomes. For a round shape, knitting should be divided into 6-8 parts and at the end of each, decrease 1 loop, for an acute-angled one - into 4 parts.

Click on the picture to enlarge

Every fashionista dreams of having something handmade in her wardrobe. Most often, needlewomen either sew or knit something. So, for beginners to learn the basics of needlework in knitting, a summer hat, which will become an indispensable summer accessory, will be an excellent gift for yourself.

Which crochet is better to choose?

Before proceeding with the manufacture of this accessory, study the diagrams and choose the model that is right for you, you should understand how to choose the right crochet hook. It depends on the quality of your product.

There are different hooks, they vary in thickness and length. Some of them are designed for a specific type of knitting. Ordinary hooks, different in thickness, have their own number,

If something is knitted from winter clothes, then you need to use a hook with a higher number, and if you want to knit a hat, as in this case, you should choose a small hook.

For convenience, the yarn has information about the hook that is best suited for knitting. If the designation on the label is missing for some reason, then fold the thread in half and get the required hook size.

Sometimes, of course, you should not obey the rules and it is better to experiment. So try, fantasize and create with pleasure.

Crochet summer hat

You can't do without a hat for the summer. This is an indispensable accessory for every woman or girl. This panama hat will take its rightful place in the summer wardrobe of a fashionista.

We can immediately say that the decoration for the hat can be made removable.

For knitting you will need:

• Yarn;
• Hooks under No. 2 and 5;
• Regilin;
• Stoppers;
• Satin ribbon.

Before you start knitting, carefully study the photo below, which shows a selection of yarn samples.

The scheme below is designed for a hat size of 49-50 cm exhaust gas.

We knit 14 rows according to the scheme, then we make an increase in every sixth column. In total, we should get 21 reports, the width of which is about 2 cm. From the 15th row we continue knitting according to the scheme. From rows 15 to 20, we repeat knitting twice. 33-38 rows are also knitted according to the scheme. From the 15-20th they differ only in the last row. Instead of CH, we knit RLS.

The following diagram shows how to knit a brim for a hat and a flower.

We start knitting the fields from the 39th row, for this we make an increase in every 3rd column. After the 45th row, we begin to add in every 4 columns, in the 51st - in every 5th. The point is to get 7 additional reports.

The fields will need to be steamed and given the desired shape, which should be similar to the shape of a flat circle. Bugrov and tail should also not be present. Next, strengthen the fields with regilin and stoppers.

We steam the fields with warm air, they will look like this:

We take regilin and tie it with RLS.

Here's what should happen.

We thread the stopper into the ends of the regilin.

We tie the same row of RLS again. And we knit the last row with a crustacean step through the column. Here is our hat and ready.

By the way, such a headdress is also suitable for autumn, if you knit it from thicker threads. And in order to learn more about the process of creating a hat, watch the video:

Video compilation with other ways:

An openwork summer hat with a wide brim is simply indispensable in the wardrobe of the fair sex at any age.

hat first

Knitting pattern

Crocheted summer hats are not only an occasion to do needlework, but also an opportunity to acquire a wonderful and useful thing for the summer.

Second hat

Knitting patterns:

The hat will protect your head from the annoying and tiring sun, add tenderness and femininity to your image.

hat third

Knitting patterns

Crocheted summer hats are a comfortable headwear.
hat four

The skin of the face does not tolerate prolonged exposure to the sun.

hat fifth

You will need 200 g of yarn, some lurex and hook number 1
Tie the bottom with a diameter of 16 cm according to the scheme.
Then knit with a tulle 8 cm high.
And finish with fields 18 cm wide.
Tie the fields with Lurex according to the scheme.
Starch the hat and dry it into shape.

6. Original hat, made in one motif

With a knitted summer hat with a wide brim, you can protect your face from the scorching sun.

hat seventh

A wide-brimmed knitted summer hat is perfect for going to the beach or protecting from the scorching sun while walking around the city.

Hat eighth

Hat 9

Hat 10

Yarn Troitskaya Astra (610m/100g) 100% mercerized cotton.
It is knitted from above, a pancake approximately according to this pattern

You can knit not 6 wedges with increments in each row, but 12 wedges, two increments in each wedge through the row.

Tula knit according to the scheme

After the pattern, we knit the finishing strip for the ribbon.
Two rows * st.b.n., air *, in the second row of st.b.n. knit over the air of the previous row.
A row of CC2H columns, and two more rows * st.b.n., air *.

Fields of knitting CCH, 24 wedges, one increase per wedge.
Tie reguilin into the edge.

11. Hat knitted from 200 g of mixed ribbon yarn, hook No. 4, wire
diameter 1.5 mm Be sure to tie the sample.

Work begins with a bottom with a diameter of 15 cm.
Then they knit with a tulle 7 cm high according to the pattern.
And finish with fields.
To give a stiffness field, a wire is laid in the last row of columns without a crochet.

Two hats connected with one pattern:

. Red hat. This extravagant hat is easy to knit. Even those who are just starting to master crocheting will be able to replenish their summer wardrobe with such an accessory.
Size 54-56.
You will need: 120 g x / 6 red yarn; hook number 2; wire with a diameter of 3 mm.
The dimensions of the product are shown in Fig. 8. Start working according to scheme 8, after the 8th row (the diameter of the bottom should be equal to
15 cm) knit 5 more rows straight without additions. Depending on the density of knitting, the number of rows with
increments can be increased or decreased. Next, perform 3 rows of RLS around the perimeter of the crown, then proceed
to binding fields. To expand, divide the circle into 8 parts and increase as shown in diagram 8 a.
Knit in this way until the brim is 21 cm wide. In order for the hat to keep its shape, it is necessary
when tying the fields along the edge next to the RLS, lay the wire along the working row and knit the RLS in the girth of the wire.
Decorate the finished hat with a brooch.