Modeling from plasticine "Herringbone green. Plasticine Christmas tree

15.08.2019

This article will present several master classes, in each of which it will be described step by step how a fir tree can be molded from plasticine.

Below you will be offered a selection of videos that demonstrate possible options for making plasticine trees. Namely: the technique of modeling Christmas trees from Play Do plasticine, as well as from homemade material, will be shown.

How to make a plasticine tree: method 1

In the first master class, it will be explained how to sculpt a voluminous fir tree from plasticine. For work, you will need green and brown plasticine, as well as a pencil and scissors.

First, a cone-shaped part should be formed from a piece of green plasticine, thus making the base of the tree. Then, in order to make the trunk, you need to prepare a pencil and stick it with brown plasticine. Then you need to attach the barrel to the base. After that, with the help of scissors, starting from the crown, it is necessary to make cuts in order to make branches. Also, the edges of each branch can be slightly bent at the top to make the tree look as if it were alive.

Method 2: add decorations

In the second master class, the process of making a Christmas tree with colorful decorations will be described step by step. For work, you will need plasticine, of course, green, and other bright colors, for example, red, yellow, to complete decorations.

First you need to prepare a piece of green and form a ball out of it.
Then the ball must be stretched in such a way that a cone-shaped part is obtained, that is, a part narrowed at the top and expanded at the bottom.
Then thin long strips should be cut from green plasticine and with the help of a spatula, cuts should be made on each of the prepared strips to make a fringe.
Next, you need to make the top of the Christmas tree, for this you need to form a green cake and use a spatula to make cuts in a circle.
After that, the strips must be attached to the base - along the entire perimeter of the cone, and a circle must be attached from above.
In order to make decorations, colored balls must be formed from brightly colored plasticine, and to make a garland, it is enough to mix plasticine of several colors, and form a long sausage from the resulting material. You can also sculpt a star from red plasticine.
At the final stage, the decorations must be fixed, and the New Year's craft is ready. All stages of work are shown in the photo.

How to make a plasticine Christmas tree: method 3

In the third master class, another option for making a Christmas tree with New Year's decorations will be presented. In order to sculpt a New Year tree according to this option, you will need green plasticine; to make decorations, you will need purple, red, yellow and blue colors.

First of all, a ball must be formed from a piece of green, and a piece in the shape of a cone must be molded from it - this will be the basis of the future coniferous tree. But in order for the spruce to turn out to be coniferous, twenty-seven balls of the same size should be formed from green. Then from each ball it is necessary to form a cone-shaped part. After that, all the parts must be attached to the base in such a way that the parts of the upper layer lightly cover the parts of the lower layer. Using a spatula, you can make light cuts in every part.

In order to make decorations for the Christmas tree, you will need to form six balls of purple, red, yellow and blue colors. Then the prepared decorations in the form of Christmas balls must be fixed on the tree, and the work can be considered complete.

All parents know how their kids are madly in love with taking part in preparing for the New Year. We offer you today to study an interesting and completely uncomplicated master class on modeling a Christmas tree from plasticine. A child will undoubtedly appreciate such an idea and will happily take on the creation of a festive souvenir.

But first you need to prepare the following materials for work:

green and brown plasticine;
pieces of plasticine of various bright colors (for sculpting Christmas tree decorations);
stacks for mass formation;
toothpick;
small beads and beads for decoration.

How to make a plasticine tree

Step 1. First, you need to create the main part of the tree - a conical crown. To do this, you need two blocks of green plasticine. From one we create a frame, on which in the future we will attach the branches, fashioned from the second piece. We roll the first bar into a ball, and then form a cone-shaped blank out of it.

Cut the second block of mass into small pieces. We mold balls from them.

Step 2. We begin to attach balls to the bottom of the frame, flattening their upper part.

The first tier is ready, we continue to form the next, placing the balls slightly higher than the previous ones.

Step 3. Now from the brown ball create the trunk of the Christmas tree. We attach it to the base using a skewer or toothpick.

Step 4. With the sharp tip of the plastic stack, draw texture along the edge of the branches.

Step 5. Next, we will make Christmas tree decorations from colored pieces of plasticine. We roll many balls of different diameters from the mass and attach them to the spruce branches. You can also complement the craft with several bright beads.

Step 6. And, of course, we will decorate the top of the tree with a plasticine star. We create a flat blank from the yellow mass and then carefully cut the desired number of rays along the edge.

Such a Christmas tree can be created long before the New Year, even in summer or autumn. It is so difficult to expect the most beloved holiday for young children, they want to brighten up the days before the fabulous night. And interesting creativity always distracts, gives a lot of positive emotions. And if this creativity is timed to the New Year, it will be doubly interesting. By creating a small Christmas tree with your own hands, you can dream up, plan how you will spend this wonderful holiday, what you will write to Santa Claus, what gifts you would like to receive from him. The Christmas tree proposed for consideration will turn out to be small and elegant, all the toys on it and the tree itself will be made of plasticine according to the proposed simple technique.

What to prepare for creating a small Christmas tree with your own hands:

A set of plasticine - green, white, brown, red, purple, orange and yellow colors will be used in the work;
- stack from the set;
- a plastic stick from a lollipop, an old rod or a skewer.

How to make a plasticine Christmas tree with your own hands

Prepare the plasticine and stack for work. All children know that Christmas trees are always green trees, so this particular block of plasticine is needed to sculpt a Christmas tree. You can also use white to add a bold snow edging. Vibrant reds, purples, oranges and yellows are the material for modeling jewelry, which will serve as small balls and tops. With the help of a stack in this tutorial, we will not only divide up the plasticine, but also make a fluffy effect on the crown. And we will also prepare a stick - a stable stem of the tree.

The herringbone should be tapered. Take green plasticine, knead in your hands and make a cone. Put it on the bottom and press down, smooth it on the sides, but not carefully, since in the future we will still process the surface with a stack. Also prepare a stick.

Pull the white plasticine with your fingers into a thin thread, like a ball of wool. Roll up a whole slide of small balls for decoration from bright pieces.

Blind a tubercle out of brown plasticine, insert a lollipop stick in the center, put a cone on top - a future Christmas tree and stretch it almost all the way. Leave a small gap. A piece of a stick, peeping under the crown, will become the trunk of a tree. Glue a thin white thread around the circumference, backing in an equal distance. Make several of these rings.

Now make the surface of the green crown and snow layers fluffy with a stack. First process the white plasticine, then green, so that the light mass does not get dirty.

After that, decorate your forest beauty with the previously prepared small balls of three colors, distributing them also around the circumference. Glue the red top or star on top.

Here is such an elegant and most dear to the heart a Christmas tree, made by hand, turned out. No one forbids fantasizing and changing the appearance of a beauty. For example, you can make Christmas tree decorations from beads, and snow layers from cotton wool, place boxes with gifts under the Christmas tree. No one expects the winter holiday as much as little children. And the fascinating sculpting will captivate young sculptors even more.

Elena Nikolaeva
Сhudesenka.ru

Blind such a Christmas tree not easy, but she looks elegant, as if alive. The whole difficulty lies in working with soft plasticine threads, fringe. We recommend that you sculpt a New Year's craft with children over 7 years old, and also stock up on enthusiasm and patience. And be prepared for the fact that a soft mass for modeling is not suitable for creating such a craft; it is better to buy dense plasticine. How to make a Christmas tree from plasticine, a step-by-step master class Elena Nikolaeva ("").

Before starting the lesson, decide if you have enough green plasticine... If there is only one bar, then the Christmas tree will turn out to be small. Mix different shades of green as you work, if you have any. You also need to be sure to decorate the green crown. We suggest using plasticine for this, and you can use beads, sequins, stones, buttons and shiny tinsel.

To sculpt an exact copy of the Christmas tree shown in the final photo, take:

- cardboard - it is desirable that it be green, if the paper will peep through the homemade crown, then it will not be so noticeable;
- a stapler and scissors, you can use a compass - to form a cone;
- red, yellow and orange plasticine - to decorate the tree;
- stack - preferably spicy.

How to mold a plasticine Christmas tree

1. First of all, prepare everything for work. Take a set of plasticine and select the colors indicated in the list. When buying a set for creativity, look into the box, it is better to have a stack in it, which will simplify the work as much as possible. To create a conical base of the Christmas tree, it is better to take thick colored paper - cardboard.

2. Form a cone. Cut off any excess so that the base of the cone is round and even.

3. Start processing green plasticine. This is the longest stage. First, knead the mass, in whole or in parts. Draw out a long sausage with your fingers, it is not necessary that the surface of this sausage is perfectly smooth.

4. Press down the full length of the sausage with your fingers. You should get a flat ribbon. Before such a procedure, moisten your hands with water, and also press down the plasticine to a glossy, and not to a paper surface, otherwise the whole structure will stick. Work carefully, pick up the plasticine with a stack in the place where it stuck.

5. Start creating a fringe - imitation of the spiky needles of a herringbone. Move with a stack from one edge to the other, drawing longitudinal notches at a distance of 2-3 mm.

6. The fringe obtained does not have to be whole along its entire length. For convenience, it can be divided into separate segments. This will greatly simplify the work.

7. Start attaching the fringe to the very bottom of the paper cone. Gently attach the top of the tape and press down on the uncut portion with your fingers. If you need to join two segments, then just press the clay with your fingers.

8. Layer more and more fringe rings. Carefully lay each top layer on top of the previous one.

9. Finish shaping the lush green beauty.

10. Stick on the fringe crown bright balls, for example, red.

11. Pull the yellow pieces into fine threads with damp fingers. Attach as tinsel to the herringbone.

12. And the final stage - an elegant top in the form of an icicle or an asterisk.

Such creativity will brighten up the expectation of your favorite holiday. Plasticine herringbone will remind you that you need to make a cherished wish for the New Year.

How to mold a card with Santa Claus from plasticine, see.

Do you like the product and want to order the same from the author? Write to us.

Still interesting:

How to mold a Christmas tree from plasticine - in stages with a photo for children:

1. Heat a block of green plasticine and knead it with your hands so that it becomes softer and easier to mold from it. As a rule, cheap plasticine itself is quite hard and you have to knead it for a long time before sculpting. You can simplify the work and buy a special soft plasticine, but it costs almost 2 times more, and the blocks themselves are smaller in size.

Roll a cone out of green plasticine. Do not worry if the cone turns out to be irregular, they will still not be visible in the future.

2. Using small scissors, make small cuts, starting from the top of the tree. We make cuts in a circle, going down. It is best for an adult to do this part of the work so that the child does not get hurt with scissors.

3. We will mold a star from red plasticine and decorate our Christmas tree with it. You can also roll up small balls and stick them to twigs, they will decorate the Christmas tree.

Here we have such a beautiful plasticine tree. Everything is very simple and fast. In addition, in the process of sculpting, you will receive a sea of positive emotions, and the child will be delighted with the resulting Christmas tree.