A simple pattern of sundresses for the office: construction, modeling. Sundress dress - a universal model for any figure Sundress without a pattern with a tie around the neck
Flowy or tight-fitting, short, midi or floor-length - any sundresses are good and comfortable in the heat. The main thing is to place the accents correctly. An elegant dress and large jewelry are a trendy combination this summer.
This original Russian piece of women's clothing first appeared in the 14th century. Although it should be noted that at the beginning of its centuries-old history, even the great Russian princes and governors wore a sundress. Apparently, this piece of clothing was so comfortable. Since then, each new century has left its mark on sundresses, but they have never gone out of fashion.
Sundresses. Different models and lengths
Even today, sundresses, photos of which can be seen in fashionable glossy magazines, are still the most popular clothing for the summer season. Lightweight models made of flowing fabrics are ideal for hot weather and beautifully highlight the figure. In addition, a sundress is an open dress with or without straps, so it is always comfortable and comfortable in the summer.
Every season, designers offer us new creative models of sundresses for every taste. Photos of sundresses can be seen in literally every glossy publication. Today, designers offer us a lot of long sundresses that fit freely on the figure. Floor-length sundresses beautifully highlight the feminine silhouette and are ideal for parties and the beach. Moreover, they must be made of airy fabrics that respond to every breath of the breeze. However, long sundresses are not suitable for everyone; they do not look very nice on short girls.
The length of “mini” and “midi” is no less relevant today and, unlike “maxi”, suits almost everyone. The choice of sundresses of this length is simply huge. These can be short beach mini-sundresses, strict models that are appropriate even in the office, sundresses with patch pockets in a sports or safari style, beautiful cocktail models, etc. Short sundresses look very playful and perfectly highlight slender, tanned legs.
Sundresses. Fashion trends 2019
Looking at the photos of fashionable sundresses from the collections, one cannot help but notice that a high waistline is in fashion, which perfectly emphasizes the chest and elongates the silhouette. In addition, this style makes the figure visually slimmer, as it hides a full tummy and hips. The neckline of the sundress can be round or V-shaped with thin straps or straight without straps. Sundresses with a “loop” through the neck are also very popular.
Speaking about fashionable colors, it is worth noting that the most popular are: coral, beige, blue, white, blue, yellow, brown, black, red and pastel shades. They give you a great mood and envelop you in bright summer colors.
Fashionistas will appreciate the variety of floral prints on sundresses. A woman's outfit will be transformed with fantasy floral patterns of large and small sizes. They can create original compositions based on the material.
Regarding the decor, we can say that in 2019 it will be quite modest. Popular prints in the form of polka dots, stripes and animal patterns are self-sufficient in themselves. The maritime theme does not lose its leadership position.
The most fashionable sundresses of this season are made from pleasant cotton, delicate chiffon and silk. They will make any image mysterious and romantic. Models in boho, casual, and classic styles were at the peak of popularity.
Sundresses. Fabrics
In order to feel comfortable and free in a summer sundress, you should give preference to thin, “breathable” materials: silk, cotton, chiffon, linen, fine knitwear. For a hot day, light colors are ideal, especially white, which best emphasizes a golden tan. And, of course, summer is the best time for bright colors. Therefore, feel free to choose rich, rich colors of sundresses in all the colors of the rainbow!
Today, both solid-color models and various patterns are popular. Floral motifs on sundresses are suitable for romantic young ladies, geometric designs are suitable for lovers of clear lines, animalistic and ethnic prints are suitable for urban Amazons.
What to wear with?
To prevent the sundress from looking boring, complement it with accessories. They go well with pendants on long chains, thin and wide belts, bracelets, headbands and bows in hair, chiffon scarves, denim jackets, short vests, wide-brimmed hats, etc. Since a sundress is an open garment, it should not be combined with closed shoes. So put your flats and pumps aside and wear them with flat sandals, heels or platform sandals and slides.
Sundresses 2019. Photo
Sundress for plus size people/pattern/sew without pattern
The first thing you should decide on is the style of the sundress.
If you have a full figure, it is desirable that it be wide enough, but not look like a robe.
A triangular neckline will look great, as it will visually lengthen the neck and emphasize the chest.
Suitable for a full figure and a style with a cut-off waist, and the recommended length of the sundress is medium - knee-length.
Once the style has been selected, you can proceed to the next stage.
A sundress pattern for plus size girls can be made either independently or downloaded ready-made on the Internet.
Particular attention should be paid to the finishing of the sundress. It is worth considering that such an outfit should under no circumstances be trimmed with ruffles and frills.
It is best to finish it with a contrasting color fabric; vertical reliefs will also visually reduce the volume.
When choosing fabric, you need to remember that large patterns and bright colors for full figures should not be purchased.
enlarge the pattern
2.
increase
3. Pattern of a sundress for a plump girl.
enlarge the pattern
4.Sew a sundress without a pattern.
We sew sundresses for overweight people
You don't have to take any measurements for this. You will need a piece of fabric in the shape of a rectangle. Its length depends on your size and the number of folds you want. You also choose the height of the fabric - it’s better if it’s knee-deep or lower.
-
Everything new is well forgotten old. This indisputable truth was once again confirmed by the fashion designers of Dolce&Gabbana, creating a stunningly spectacular and incredibly feminine summer collection of dresses and sundresses. Flowy silhouettes, bright, rich prints and simple cuts are the secrets to the success of this collection. Our mothers wore such dresses in their youth, and today we have such an opportunity. We invite you to join the work of great couturiers and sew this summer sundress using a simple pattern.
The sundress pattern is modeled according to, the increase in freedom of fit is 1.5 cm.
Rice. 1. Front view of the sundress
Rice. 2. Rear view of the sundress
The sundress has a button closure at the front, but for convenience there is a zipper sewn into the back. The pattern on the large patch pockets completely matches the pattern of the skirt, so the pockets are almost invisible.
Modeling a sundress pattern
It is better to start modeling from the front half of the dress. Cut the front half of the dress at the waistline. Transfer the chest dart to the waist dart. We told you in detail how to do this in the lesson. You can follow the link and refresh your knowledge!
We continue the modeling. From point A, set aside 27-30 cm upward (depending on the size, you can always increase or decrease the depth of the cutout). Draw a horizontal line to the right 13-14 cm long. Set aside 1 cm from the armhole line and draw a new armhole line.
Increase on the bar: make an increase on the AB bar with a width of 5.25 cm (the finished width of the bar will be 3.5 cm). The strap is cut in two pieces, 4 cm wide. There are a total of 2 straps in this sundress, which are sewn along the back and fastened at the front with buttons. The length of the strap is about 50 cm, but for each size the length is determined individually.
Rice. 3. Modeling the front bodice of a sundress
Separately, re-seam the top edge of the front bodice, 4 cm wide.
Modeling the bodice of the back of a sundress
Model the bodice of the back of the sundress in the same way as the front bodice. All linear dimensions necessary for modeling are shown in Fig. 2. We remind you that depending on the size, the length of the back bodice may vary. You can independently determine the length of the bodice from the waist by measuring it along the back with a measuring tape.
Separately, remove the facing of the top back.
Rice. 4. Modeling the back bodice
The skirt for this sundress is cut in the form of a rectangle about 70 cm long and a width equal to the circumference of the hips multiplied by 1.6 cm (or 1.8 if the fabric is very thin). On the front it is necessary to add a 5.25 cm wide hem on each side. Since it is not possible to cut out the skirt panel without side seams (due to the limited fabric width of 145 cm), seams must be made on the sides and the center of the back.
How to cut a sundress
To sew a sundress you will need: about 1.8 m of satin, 145 cm wide, 1.4 m of viscose lining, concealed zipper, 11 buttons, 2.5 cm in diameter.
The cut details of the sundress are shown in detail in Fig. 5. All details must be cut out along the grain thread with seam allowances of 1.5 cm, along the bottom of the sundress - 4 cm.
Rice. 5. Details of the sundress cut
From the lining fabric, cut out the details of the bodice minus facings and the panel of the skirt with an increase of 1.4 to the hip circumference for gathering.
How to sew a sundress
Facing details, placket allowance and outer strap details. On the details of the bodice and back, press the side seams and seam allowances. Sew the skirt panels along the side seams, iron the allowances and overcast them. Gather the skirt along the waistline and determine the location of the pockets. fold, loosen the gathers and stitch the pockets.
Then gather the skirt again (to the straps), to the length of the waist circumference according to the measurement + 2 cm for freedom of fit, baste the skirt to the bodice. Make sure that sections of the planks are not gathered. Sew the skirt to the bodice. Press seam allowances up onto bodice and overcast. Sew along the back.
Fold the strap parts in pairs with the right sides facing each other (reinforced and non-reinforced strap parts), stitch along the short and long sides, turn right side out, having previously trimmed the allowances along the edges, the corners - diagonally, sweep the straps cleanly on all three sides, iron. Baste the straps to the back of the bodice according to the markings, adjust the length of the straps.
Sew facing details along the side seams and overcast along the bottom edges. Stitch the facings to the front bodice panel pieces with the short sides. Then fold the strips to the wrong side, stitch the facings along the upper edge of the back and front bodice. Cut off the allowances, fold the facings to the right side, and sweep cleanly.
Fold the allowances along the bottom of the sundress, stitch and iron. Fold the strips to the wrong side, bend them, stitch exactly to the edge and iron.
Sew loops on the placket and straps, and sew buttons along the markings.
IMPORTANT! If you decide to sew a model with a lining, the consumption of lining fabric is indicated above. Sew the lining parts and stitch them to the facings made from the main fabric. Next, sew the model as recommended above.
The sundress is ready, and you will shine in it! See you again at the Sewing School.
When working in an office, be sure to adhere to a business style, as required by the corporate rules of many companies, in order to maintain the company's image. Therefore, it will be useful for craftswomen who sew clothes for themselves and to order. The simplest version of such a wardrobe item is a sheath dress, for sewing which a regular pattern of a fitted or straight silhouette is used.
The entire creation process can be divided into several main stages, after overcoming which you will create an excellent formal outfit.
Stage one: taking measurements
In order for the pattern of sundresses for the office to fit in size, you need to build it based on your own measurements. This is precisely the beauty of individual tailoring, because things that are sold on the market and in stores are sewn according to generally accepted standard volumes. And, as you know, they do not always coincide with real forms. That’s why girls have to try on a huge number of dresses to find the one that fits their figure perfectly.
So, to build a template you will need the following measurements:
- girth of chest, waist, hips, neck;
- back width;
- breast dart solution;
- shoulder width;
- chest height;
- length of the back and front to the waist.
Stage two: constructing a drawing of the workpiece
The pattern of a warm sundress for the office and the summer version are constructed identically, the only difference is the allowance for a loose fit. For a summer product, add 1 cm to the measurement, and for a warm product - 2 cm.
The drawing is developed on the basis of a quadrilateral with sides corresponding to 1/2 the volume of the chest + an increase in the length of the product. Horizontally in the drawing, you should immediately mark the height of the chest, waist, hips and draw lines that form an auxiliary grid.
At this stage, the main pattern of sundresses for the office is ready. It can already be used for sewing products from thick and thin fabrics.
Modeling and design
The workpiece can be modified by adding raised seams. To do this, the pattern of sundresses for the office is drawn out in accordance with the desired lines, and then cut into elements. In this way, you can mark boundaries for combining different colors of fabric, or you can simply make seams and stitch them beautifully.
Stage three: cutting and assembly
How to cut for summer and for the office? The pattern should be constructed taking into account a loose fitting allowance, which is added not only along the chest line, but also along the hips and waist. Otherwise, the product will hinder movement. The only exception may be fabric with elastane or knitwear. For the rest, cut as standard. An allowance is made along the contour of the parts to process the seams: along the hem - 4 cm, and along the seams - 1 cm. If the fabric is very loose, then the allowance can be increased.
To make the product easy to put on, it is better to make it with a zipper. To do this, you can use a tractor or secret lock 75 cm long. It should be inserted into the middle seam of the back, on which you can also make a cut for a comfortable step. You can also make it tapered at the bottom for the office. In this case, the patterns are narrowed along the side seam from the hip line to the hem by about 5 cm.
Stage four: decorative design
A completely simple-to-build blank in combination with a calm fabric will make the product strict, and in order to somewhat improve the image, it needs to be properly decorated. For example, embroider it at the neck with discreet stones to match the main fabric, or make a lace or contrasting collar. A thin belt at the waist would also look nice, for which you definitely need to make belt loops. This product can be worn with a thin mesh neckline or a plain tight knitted T-shirt.
The simpler the silhouette, the richer the material you can choose. And we are not talking about color at all, but about texture. The embossed weave of the fabric is an ideal option for a relaxed sundress. A product with embroidery along the field of the material will look original. Such a sundress will not need to be decorated and supplemented with vertical seams and trim. The simplest sundress pattern for the office is suitable here.
"Burda" is one of the sewing magazines that quite often uses similar techniques with a minimum amount of detail and maximum fabric saturation. It is precisely these wardrobe items that, as a rule, become the most beloved, because there is nothing superfluous in them.
- Actually sewing (tailoring includes knowledge of certain sewing technologies, depending on the choice of model)
This entire list, of course, will not be to the liking of a novice seamstress. But summer is in full swing, and I want something new right now!..So today we will sew a sundress without a pattern.
Let's start with the elastic model...
- or insert an elastic thread into the bobbin, then the process will be even more pleasant and automatic
Sew a sundress without a patternDear seamstress girls! Beginners in sewing! Today's post is for you. Because today we will look at the 4 lightest models of a summer sundress, and the best part is that a pattern for such a sundress is not needed)).
Initially, sewing any, even simple, thing involves several stages:
Taking measurements
Building a base pattern
Construction of a specific model based on a pattern
Let's start with the elastic model...
This model is based on a rectangle. As a rule, the width of the rectangle = the width of the fabric, and this is usually 140-150 cm.
The height of the fabric rectangle depends on the desired length of the sundress. We measure the length from the level of the armpits on the figure.
The next step is to measure the area at the top of the width of the fabric, which we will sew with an elastic band. Usually, either the bodice area alone or the upper part of the sundress up to the waist is sewn with an elastic band.
We will use an elastic thread for this process, and here we have two options:
sew the elastic thread in a zig-zag pattern, simply applying it to the wrong side of the fabric (in the process, be sure to stretch the elastic thread to create a gather)
The sundress is ready)).
What measurements will we need?
semi-hip circumference
See also:
Women's measurements. Table of female figure measurements
Types of female figuresWe cut out two rectangles from fabric with a length = the length of the sundress + 4 cm for allowances and a width = the half-circumference of the hips + an increase in freedom (5-8 cm, for example).
Strapless sundress (without pattern)
Sewing steps:
Trapeze sundress without pattern
We fold them in two layers.
Let's narrow them a little towards the bottom.
We wear it with a belt))).
Now you need to determine whether the horizontal gathering on the elastic thread will fill the entire part of the sundress to the waist (then we sew this part of the fabric with an elastic band to the waist, the distance between the horizontal lines = 1 cm approximately):
If the elastic thread does not completely fill the upper part of the sundress (as in the photo below), then we sew four lines on top (for a tight fit, since one line will not give it), and we also sew four lines with an elastic thread at the waist:
We will get a rectangle assembled with an elastic band. We sew both sides of it - this will be either the side seam or the back middle seam of the back.
All that remains is to process the bottom cut of the sundress.
Fold 1 cm of fabric over to the wrong side, sew it with a straight stitch, or iron it, then fold it another 1 cm and sew it on the right side of the fabric. The result will be processing the cut with a double hem.
The sundress is ready)).
Sundress without a pattern with a tie around the neck
Now let's look at another simple and interesting model.
This sundress with tie around the neck. What does it consist of? From two rectangles sewn on the sides and connected at the neck with a ribbon, the ribbon is tied into a bow.
What measurements will we need?
- sundress length (measure from the base of the neck to the front)
- semi-hip circumference
- the distance from the point of the base of the neck (where the neck and shoulder connect - I’m writing in simple language, in more detail) and the point of the middle of the armpit (raise your hand and measure to the point where the side seam will begin).
We cut out two rectangles from fabric with a length = the length of the sundress + 4 cm for allowances and a width = the half-circumference of the hips + an increase in freedom (5-8 cm, for example).
We retreat 10 cm from the upper horizontal line on the sides, from this point to the side we set aside the distance that we measured (from the neck to the armpit), and cut off the resulting angle (as in the figure below on the left). We make a drawstring along the upper cut, folding the fabric to the wrong side.
We process both rectangles in this way.
Sew the rectangles on the sides.
We make a long ribbon and thread it into the drawstring. We hem the bottom of the product.
Strapless sundress (without pattern)
This sundress is also based on a rectangle, the width of which is slightly larger than the circumference of the hips. Length = desired length of the sundress.
Sewing steps:
- Sew the side sections of the rectangle. There will be one side seam, or it will be the middle back seam.
- We measure the circumference above the chest under the arms with an elastic band, cut off the desired length of the elastic band.
- We sew elastic into the top edge of the dress.
- We cut out a strip for ruffles (gathering) with a height of 12 cm and a length = girth under the bust multiplied by 1.5.
- Sew the gather evenly to the top edge of the dress.
- If desired, sew another elastic band to the waist.
- If desired, the sundress can be fitted a little.
- We process the bottom cut with a hem.
The sundress is ready! We wear it with a belt.
Trapeze sundress without pattern
The sequence of actions is as follows:
- Cut out two squares with sides 75 cm.
- We fold them in two layers.
- Let's narrow them a little towards the bottom.
- We measure the distance between the points on the shoulders. Place a dot in the center of the fabric. We set aside half the measured distance from the center. We put points A and A1.
- From point A we set aside the shoulder width (5-7 cm). Set aside the shoulder width on the other side as well.
- Between the shoulders we cut out a neckline of the desired depth (7-10 cm).
- From points A and A1 we cut off a corner on the fabric, drawing this line to the middle of the fabric. You should end up with an inverted trapezoid with the corners cut off, as in the picture below:
We sew these two parts along the dotted lines in the figure (along the side and shoulder seams).
We process the neck and bottom of the product.
We wear it with a belt))).
Sew a sundress without a patternDear seamstress girls! Beginners in sewing! Today's post is for you. Because today we will look at the 4 lightest models of a summer sundress, and the best part is that a pattern for such a sundress is not needed)).
Initially, sewing any, even simple, thing involves several stages:
Taking measurements
Building a base pattern
Construction of a specific model based on a pattern
Actually sewing (tailoring includes knowledge of certain sewing technologies, depending on the choice of model)This entire list, of course, will not be to the liking of a novice seamstress. But summer is in full swing, and I want something new right now!.. Therefore, today we will sew a sundress without a pattern.
Let's start with the elastic model...
Sew a sundress with elastic without a patternThis model is based on a rectangle. As a rule, the width of the rectangle = the width of the fabric, and this is usually 140-150 cm.
The height of the fabric rectangle depends on the desired length of the sundress. We measure the length from the level of the armpits on the figure.
The next step is to measure the area at the top of the width of the fabric, which we will sew with an elastic band. Usually, either the bodice area alone or the upper part of the sundress up to the waist is sewn with an elastic band.
We will use an elastic thread for this process, and here we have two options:
sew the elastic thread in a zig-zag pattern, simply applying it to the wrong side of the fabric (in the process, be sure to stretch the elastic thread to create a gather)
or insert an elastic thread into the bobbin, then the process will be even more pleasant and automaticNow you need to determine whether the horizontal gathering on the elastic thread will fill the entire part of the sundress to the waist (then we sew this part of the fabric with an elastic band to the waist, the distance between the horizontal lines = 1 cm approximately):
If the elastic thread does not completely fill the upper part of the sundress (as in the photo below), then we sew four lines on top (for a tight fit, since one line will not give it), and we also sew four lines with an elastic thread at the waist:
We will get a rectangle assembled with an elastic band. We sew both sides of it - this will be either the side seam or the back middle seam of the back.
All that remains is to process the bottom cut of the sundress.
Fold 1 cm of fabric over to the wrong side, sew it with a straight stitch, or iron it, then fold it another 1 cm and sew it on the right side of the fabric. The result will be processing the cut with a double hem.
The sundress is ready)).
Sundress without a pattern with a tie around the neck
Now let's look at another simple and interesting model.This is a sundress with a tie around the neck. What does it consist of? From two rectangles sewn on the sides and connected at the neck with a ribbon, the ribbon is tied into a bow.
What measurements will we need?sundress length (measure from the base of the neck to the front)
semi-hip circumference
the distance from the point of the base of the neck (where the neck and shoulder connect - I write in simple language, more details here) and the point of the middle of the armpit (raise your hand and measure to the point where the side seam will begin).