Single-phase gel for nail extension: how to use? The technique of using a single-phase gel. TNL Classic Clear Gel - one-phase extension gel: advantages and disadvantages. Are there rigid forms

07.07.2019

Most girls believe that single-phase helium build-up is superior to other methods.

One-phase gel for nail extension - what is it?

does not require large expenses;
easy to use;
lasting;
has no toxic fumes.

Single phase gel for nail extension. How to use and what are the advantages you will learn from our article

The profitability of the product in question is justified by the fact that, in contrast to the three-phase gel, it is necessary to purchase only one jar of the product, and not several.

One-phase gel for nail extension (how to use it is described below) is a special coating for nails that combines all three standard layers (base, main and top).

This combination is the main distinguishing feature of the product in question.

This product is used for the most part by persons who have no experience in nail extension. Also single-phase coating is used by professionals for clients with skin hypersensitivity and nail plates.

The product contains non-toxic ingredients. And the absence of the need to apply several layers reduces the load on the nail plates. The single phase gel is sold in one plastic container, which is convenient as it replaces a large extension kit. The disadvantage of a single-phase gel is the impossibility of applying decorating stickers.

One-phase and three-phase extension gel: what's the difference?

How to use a single-phase gel for nail extension and what is the difference between a single-phase coating and a three-phase coating? These are the two questions that newbies in nail extension are interested in. The single phase coating is a single gel type for all phases of use. While in the composition of the three-phase coating there are 3 different gels, designed for different phases.

The single-phase coating has a liquid structure, which allows the coating to adhere well to the nail, but complicates the modeling and the formation of free edges. Various three-phase gels for different stages of work allow for more varied types of manicure and does not complicate modeling.

Single-phase coating allows for simpler types of manicure, and three-phase gels are designed for more complex designs. But it is worth noting that it takes more time and skill to build up with a three-phase coating than when building up with a single-phase coating.

Single-phase gel for nail extension: which is better

There are various brands of single phase gel, so before you start using it, you need to find out which single phase gel is better.

The best single-phase gels for nail extension are:

All presented gels are suitable for self-extension of nails. To remove them, a special solution for removing the helium coating is required.

Advantages of building gel from RuNail

RuNail single phase nail extension gel is suitable for self-coating. The product is self-leveling, which means that after application, the gel itself takes a flat surface without additional manipulations.

This product allows you to completely replace the entire set for nail extension, which is very convenient and economical.

The gel is on sale in a jar. One jar contains 15 or 30 g. The consistency of the product is not very thick, it is convenient when making a flat nail plate. Also, this consistency allows you to fill in all the irregularities of a natural nail. RuNail single phase gel is suitable for both professional and home use.

Gel for building Blue Sky, its features

Blue Sky gel is used for nail extension both at home and in the walls of the salon. A distinctive feature of this product is that it is applied not to an artificial base, but only to a natural nail. To apply it, you must first treat the nail with a primer.

The tool covers well the imperfections of natural nails and at the same time the manicure looks natural. It should also be noted that drying of this coating takes a little longer than gels from other manufacturers.

TNL Classic Clear Gel - one-phase extension gel: advantages and disadvantages

TNL Classic Clear Gel single-phase extension gel is used quite often.

Its main advantages are that it:

has a transparent texture;
easy to use;
creates a strong nail plate;
adheres well to natural nails;
does not crack;
well suited for creating an aquarium effect;
responds well to temperature changes.

But besides the positive aspects, this coating also has disadvantages:

The use of a primer is required. If the information on how to use this product has not been studied and the use of the primer has been ignored, the extended nail will quickly fall off.
After drying, a sticky layer remains... You can get rid of this defect with the help of a special tool.
Does not fit to create three-dimensional drawings.

Despite the existing shortcomings, TNL Classic Clear Gel single-phase gel is well suited for home use.

Single Phase Nail Extension Coating: How to Apply

To learn how to use single phase nail gel, it is enough to follow the recommendations, which describe step by step how to use the tool:

Preparation working surface.
Shaping the nail. This can be done using nail scissors and a nail file.
Application of a single phase gel. Before using the coating, you need to decide on the method for nail extension. It is possible to extend nails both with forms and with tips.

How to carry out preparatory work is described in the table:

What preparation must be done before using the coating	How to prepare
Hygienic treatment of hands.	Hands should be washed with soap and water. After washing, you need to wait until it is completely dry.
Cuticle removal.	The cuticle should be trimmed or pushed back. It is necessary to carry out this procedure a couple of days before applying a single-phase coating for building. This is required in order for all possible wounds to heal. Cuticle should be removed with non-metallic tools.
Grinding the nail plate.	Use a special file to level the surface of the nail. This will allow the coating to lay down more evenly.
Degreasing the nail.	Single-phase gel for nail extension (how to use it is described below) requires the use of a primer. The product is applied to the nail plate, preventing contact with the skin.

Important! If you use a single-phase coating immediately after removing the cuticle, there is a risk of infection.

The completion of the procedure depends on the chosen extension method. After completion, it is allowed to cover the nail with a colored varnish, if no colored gel has been applied.

Note! Before using the single phase gel for nail extension, you should assess the integrity of the nails and the skin around them. If fresh deep damage occurs, the procedure should be postponed until the adjacent skin heals.

Using a single-phase gel on forms (instruction)

To know how to use a single-phase gel for nail extension, just read the information on the use of the product. This information is available even for a beginner.

It is first necessary to prepare the working surface. After the preparation is done, you should set the mold for modeling the nail. The form can be either top or bottom. The modeling surface should be firmly fixed. After fixing the shape, a thick layer of gel is applied to the nail plate and modeling surface.

It's important to know! The gel should not come into contact with the skin and flow into the side ridges.

Shaping the future nail is done at this stage. After the gel is applied, it is dried with a special lamp. When the coating is completely dry, experts recommend applying another thin layer of gel. This will allow the nail to be more durable. Each layer applied must be lamp dried separately.

The finishing step is to polish the surface to give it a shine. Polishing is carried out with a special buff.

According to the instructions presented, you can build up both yourself and another person.

Single-phase gel for building on tips (instruction)

For helium build-up it is necessary to choose the right tips. Their shape should match the shape of the nail.

Extension of nails is carried out in the following order:

treatment working surface with an antiseptic solution;
nail surface cut to roughness;
gluing tips(fastening is made in the area from half to 1/3 of the nail);
tips length corrected with a file;
polished the place where the tips are attached to the nail;
application transparent gel layer;
drying coverings in the lamp (not until completely dry);
application another thicker layer and re-drying the gel.

If the surface of the nail turns out to be uneven, it is necessary to grind off the relief with a file and reapply the gel layer.

Pro Tips: Long Lasting Gel Nails

Professionals, in order to make the nails happy longer, recommend:

carefully remove the cuticle before building up;
do not apply hand cream on the day of the procedure;
do not apply the gel to sore or damaged nails.

To prevent the weakening of natural nails, after building up, experts advise drinking one course of vitamin complexes and preparations with calcium.

Extension of nail plates with a single-phase coating is a simple procedure. But in order for the manicure to be perfect, it is important to follow the instructions and carefully prepare for the process. A single-phase coating for nail extension will allow not only to make a beautiful manicure, but also to achieve the required length and shape of nails.

Single phase gel for nail extension. How to use, see this video:

How to use single-phase gel for nail extension, see this video:

The appearance of painful symptoms in the muscles and joints causes severe discomfort, interferes with the performance of work, and does not allow rest. In the treatment of inflammation of the musculoskeletal system, the drug Fastum gel provides effective assistance. In what cases is this remedy used, are there any restrictions in the use, how to use it correctly - more on this in the annotation to the medicine.

Fastum gel - instructions for use

This agent belongs to non-steroidal anti-inflammatory, intended for external exposure to a sore spot. The instruction stipulates the composition, the principle of operation of the drug, indications for use, prohibitions for use. According to the description, Fastum gel ointment:

is effective for pathologies of joints and muscles;
applied twice a day;
dispensed without a prescription;
should not be used for more than two weeks;
has a storage temperature not higher than 25 degrees.

The amount of Fastum for application depends on the size of the inflamed area. There is a feature of the application:

long-term use is irritating;
during treatment, sun exposure is not recommended;
it is forbidden to visit the solarium during use and after 2 weeks;
it is allowed to use the product during physiotherapy;
drug overdose is impossible due to low systemic absorption.

Composition

The main active ingredient in the Fastum preparation - ketoprofen - has anti-inflammatory, analgesic properties. Its concentration per hundred grams is 2.5%. Excipients providing consistency, aroma, absorbency:

purified water;
hybrid lavender oil;
trolamine;
ethanol 96%;
neroli oil;
carbomer 940.

Release form

Gel-like preparation Fastum is a colorless viscous mass, transparent, with a pleasant smell. The medicine is sold in cardboard packaging, has instructions for use inside. The drug has two forms of release:

a tube made of aluminum alloy with a weight of 100, 50, 30 grams;
a polypropylene container with a dispensing device, weighing 100 grams.

Pharmacodynamics and pharmacokinetics

The gel is intended exclusively for external application to the inflamed area. The mechanism of action is inhibition of the biosynthesis of hormones prostaglandins, which are biological regulators. When applied to the skin, the drug penetrates to the focus of the disease, providing local therapy. The medicine has an effect:

anti-inflammatory;
pain reliever at rest and on movement;
reducing morning stiffness of the joints;
antiexudative - eliminating increased vascular permeability, preventing fluid from leaving the tissue, which stops the appearance of edema.

Pharmacokinetics, explaining the biological, chemical processes that occur when using the gel, indicates a slow absorption of the active substance. Fastum drug:

does not accumulate in the body;
the half-life is one to three hours;
the amount of substance that gets to the site of inflammation, within 5%;
after 8 hours, the concentration of ketoprofen in the blood remains up to 0.15 μg / ml;
the medicine is excreted by the kidneys.

Fastum gel - indications for use

Since the drug is characterized by a pronounced anti-inflammatory effect, it is used for lesions of the musculoskeletal system. Possessing de-relieving properties, it is used for myalgias of various origins, eliminating pain. Fastum has excellent reviews in cases:

articular syndrome - gout;
ankylosing spondylitis;
lumbago;
bursitis;
osteoarthritis;
inflammation of tendons, ligaments;
osteochondrosis with radicular syndrome;
psoriatic arthritis.

Fastum is prescribed for inflammation, pain syndrome caused by:

rheumatoid arthritis;
post-traumatic inflammation of the joints, soft tissues of the musculoskeletal system;
tension, stiffness of the cervical muscles;
injury to joints, ligaments, tendons;
fractures, dislocations, bruises;
osteoarticular pain;
sciatica;
rheumatic diseases.

Contraindications

Even with a strong inflammatory process, the use of Fastum is not always allowed. In order not to cause side effects, it is necessary to take into account the contraindications for use. It is forbidden to use the gel when:

the child is less than 12 years old;
hypersensitivity to acetylsalicylic acid;
skin allergy to an active substance;
the presence of photosensitivity;
the patient's history of urticaria, bronchospasm, rhinitis provoked by acetylsalicylic acid.

It is unacceptable to use Fastum gel while breastfeeding. During lactation, harmful substances may enter the baby with mother's milk. Contraindications for use are:

intolerance to the components of the drug;
infected wounds, abrasions on the skin;
weeping dermatoses;
eczema;
third trimester of pregnancy;
intolerance to non-steroidal anti-inflammatory drugs;
bronchial asthma;
chronic heart failure;
dysfunctions of the kidneys, liver;
ulcerative lesions of the gastrointestinal tract.

Method of administration and dosage

The gel is used only externally. Fastum is applied to the skin with a thin layer with massaging movements. Application features:

the dosage of the drug is an extruded strip 3-5 centimeters long;
course duration - 14 days;
the amount is adjusted depending on the size of the lesion;
the drug is applied to the skin twice a day;
when using the dispenser, it is necessary to keep it in a horizontal position by pressing on the dome until the gel appears.

special instructions

The instruction stipulates special points that you need to pay attention to when treating with Fastum. This will help avoid unpleasant situations. The gel is allowed to be used when driving vehicles, performing work that requires concentration. The abstract prescribes:

do not use the medicine with airtight dressings;
after application, be sure to wash your hands;
do not allow contact with the mucous membrane of the eye;
do not use in the presence of skin damage, wounds, cracks, ulcers;
during treatment, avoid exposure to sunlight;
refuse to visit the solarium.

During pregnancy

A serious test for a woman is the waiting time for a child. The body of a pregnant woman is experiencing constantly increasing stress. This causes the appearance of pain in the back, joints, relaxation of the ligaments, pulling symptoms in the lower back. Ketoprofen, which contributes to the rapid elimination of these syndromes, can harm the fetus, because it penetrates deeply into soft tissues. There are such recommendations for using Fastum during pregnancy:

it is permissible to use it in the first, second trimester under the supervision of a physician, taking into account contraindications;
prohibited in the last weeks.

In childhood

Since the gel contains a potent substance, you need to carefully consider its use in childhood. The use of Fastum is strictly prohibited under 12 years of age. Drug use for external use:

can cause developmental disorders of the child;
provoke allergic reactions;
lead to complications in the work of the gastrointestinal tract;
promote intoxication of the body;
cause exacerbation of liver and kidney diseases;
to bring to the appearance of dangerous side effects that threaten health.

In case of impaired renal and liver function

The instructions for use stipulate the features of using the Fastum drug in the treatment of patients with impaired liver renal function. This is due to the effect of non-steroidal anti-inflammatory drugs on these organs. If there is a need for treatment, systematic monitoring of functions is required. The toxic effect of the drug can provoke:

cholestasis;
acute hepatitis;
liver atrophy;
deterioration of renal blood flow;
fluid retention in the body;
the appearance of edema.

Interaction with other drugs

According to the instructions for use, it is required to take into account the simultaneous use of Fastum gel with other drugs. You can get complications if you take this issue lightly. The following features of the interaction of drugs with the gel are observed:

NSAIDs increase the risk of ulcers and bleeding
ATP inhibitors, beta-blockers - weaken their effect.

If you use Fastum and other medicines at the same time, you can get the following results:

thrombolytics - provoke bleeding;
acetylsalicylic acid - reduces the binding of ketoprofen to proteins in the blood plasma;
diuretics - contribute to the development of renal failure;
drugs that cause photosensitization - enhance their effect;
Warfarin - provokes severe bleeding.

Side effects

Features of the human body, concomitant diseases, violations of the dosage and duration of treatment can cause side effects when using Fastum. The onset of unpleasant symptoms requires the abolition of the gel, a visit to the doctor so that he can pick up another drug. Side effects can be observed from the body systems:

digestive - vomiting, nausea, abdominal pain, diarrhea, bleeding, perforation, the appearance of ulcers in the digestive tract;
urinary - disorders in the functioning of the kidneys.

The occurrence of such pathologies when using Fastum gel is not excluded:

allergic dermatitis;
hyperemia of the skin;
photodermatitis;
purpura;
bullous dermatitis;
eczema;
stomatitis;
liver dysfunctions;
hives;
erythema;
anorexia;
gastralgia;
headache;
skin rash;
bronchospasm;
dizziness;
drowsiness;
noise in ears;
swelling.

Analogs

If there are contraindications for using the gel or side effects have appeared, you can change the drug to drugs with a similar active substance. It is better to entrust the solution of this issue to the doctor. Analogues of Fastum, which have the same active ingredient:

Ketoprofen-Werte;
Artrum;
Ketonal;
Artrosilene;
Bystrumgel;
Flexen;
Keplat;
Febrofid.

New materials for nail service today appear with such frequency that it is sometimes difficult for even a true professional to keep track of all the new products. A beginner, on the other hand, can become completely confused.

Single-phase gel for nail extension has already gained considerable distribution and acquired an enviable staff of fans both among graduates and among those who are taking the first steps in comprehending the intricacies of this beautiful art. Our article will help you understand all the intricacies of the technology for those who decided to learn how to use a single-phase gel for nail extension, what kind of material it is and what are the features of working with it.

Why is the gel called single phase

To find the answer to this question, consider the main stages of the technology. Building up is carried out in three stages:

Application of a base coat, which is responsible for adhesion to the surface of the natural nail.
Modeling the form.
Coating with a fixing layer that prevents rapid wear of the material and is responsible for the gloss (or for the velvety surface, if the design implies a matte texture).

A three-phase system involves the use of three different products, each of which fulfills a different function. But when it comes to single phase coating, only one material is needed. What it is? One-phase gel for nail extension, of course. He is able to solve all three problems.

Material advantages

Often, a single phase gel becomes the choice of beginners. This is the right decision, because you have to spend only one jar to start filling your hand in building.

Another advantage is the consistency of the material. Compared to three-phase products, it is quite liquid, but not pourable. The gel is easy to apply and distribute.

Many girls who have had time to try this type of material claim that it is very obedient, excellently crimpable and easy to file. This means that such a gel is also suitable for complex arched shapes, for example, a pipe.

For many who decided to find out what it is - a single-phase gel for nail extension, a huge selection of colors has become a discovery. Manufacturers offer not only classic white, pink and transparent gels, but also the entire palette of camouflages, as well as luxurious opal options, gels with shimmer and glitter, luminescent materials. In the palettes of many brands, you can easily find a gel of any color.

It is not difficult to understand how to use single-phase gel for nail extension. If you have experience with 3-phase materials, you will love the process. But even if this is your first attempt, it is quite possible to count on a good result.

However, you should not be deceived and wait for a miracle. Working with any materials for a gel manicure has many nuances. If you have the desire and opportunity to take a training course - by all means do it. Well, if this is not possible (or you generally consider nail extension as a hobby), get ready to work hard. Follow our advice, perform each operation carefully, practice and learn - then everything will definitely work out.

Weak sides

In the reviews, many describe the semi-liquid consistency as one of the advantages. But there are those who are frankly uncomfortable working with her. Get ready for the fact that it will take some time to get used to such a structure of the material.

The disadvantages of many include wear resistance, which is lower than that of materials for a three-phase system. Correction will have to be done more often, the risk of chipping is slightly higher - you need to know about this in advance.

Required tools and aids

The single phase gel is applied using a flat, rounded brush made of synthetic bristles. Natural will not work for these purposes. When choosing a brush, place it on your little finger nail and press lightly: it should not go over the side rollers.

For drying gels, it is best to use hybrid lamps with a power of at least 36 watts.

You can not do without forms, and a cleanser. The most important tool after the brush, perhaps, can be considered a file with an abrasiveness of 100/180 grit. Some craftsmen use an apparatus with a suitable cutter for sawing, but this requires considerable skill.

Preparing the nail plate

If the material comes into contact with pterygium, cuticle or skin, detachment cannot be avoided. Therefore, the preparatory stage is extremely important. There are no special recommendations when working with a single-phase gel: do a manicure in the same way as you do before working with any other material.

Thoroughly clean the nail from pterygium, move aside, cut and polish the cuticle with a spherical cutter, treat the areas adjacent to the lateral ridges. File the ends with a file with an abrasiveness of 180 grit. Polish the surface of the nail plates with a buff, thoroughly remove dust, wipe the nails with a lint-free cloth dipped in a special cleaner.

Primer: why you need it, which one to choose, how to use

Some masters consider this step optional. But if there are no obstacles (for example, allergies), it is better to use a primer. It acts like double-sided tape to securely bond the material to the surface of the nail.

The primer also solves other problems: it removes excess moisture, prevents the development of infections, degreases, dries the surface a little.

There are so-called acidic and acid-free products. In fact, both contain acids, but in the second, their content is lower. This option is suitable for treating nails before applying varnish.

And before applying the single-phase gel for building, the nails must be coated with an acidic primer. It is important that the material does not come into contact with the skin. The product dries in the air, it does not need a lamp. You can start further coating steps in a minute. But if after applying the primer more than half an hour has passed, the procedure must be repeated. Therefore, it makes no sense to cover all 10 nails before starting work.

Review of popular products

Which one-phase gel for nail extension is better? There is no definite answer to this question, each master has his own favorites. But there are several means, the reviews of which are the most numerous.

3 phases of work with single phase gel

A common mistake many beginners make is the belief that one-phase varnish can be used to build up very quickly by laying out the material in one layer. This is not true. Single-phase gel nail extension technology involves the same steps as when working with three-phase materials. If you lay out the material in a thick layer with one stroke, there will be no good result. Let's look at an example of how to work with a single-phase gel.

Build-up on forms

Let's make a reservation right away that this material will not work for the currently fashionable upper forms. Only classic bottom molds can be used.

There is no need to rush. If you have little experience yet, work with each finger separately, drying each layer. Before you start using the one-phase gel for building, nails should be thoroughly processed, degreased and primed.

Adjust the shape to the nail, if necessary, make cuts so that the base fits as tightly as possible.
Glue the edges carefully, making sure that all symmetrical pieces match perfectly. You can use a stationery stapler so that the form does not stick out during work.
Rub in the first base coat of 1-Phase Gel, starting from the butt and working towards the cuticle. Avoid skin contact! If the gel bakes on the cuticle, detachments are inevitable.
Cure the material in the lamp as much as the manufacturer recommends. Evaluate the result by lightly tapping the surface with a pusher.
Place a drop of gel on top of the mold, where the free edge will form. Distribute the material with confident strokes, guided by the markings. Shape the apex according to the desired length. Send to the lamp to dry.
Check the surface carefully, add a little gel to the holes if necessary. File away unnecessary bulges with a file. If you don't plan on doing the design, simply cover the nail with another thin layer of gel, turn your hand palm downward and let the material flatten out. Submit the work to the lamp again.
You can start sawing. Follow the direction of the side edges, check the symmetry of the nail. One-phase gel does not need a top coat, but you can use, for example, a satin or velor finish for decorative purposes.
It remains only to remove the dust and remove the stickiness with a special tool.

Polymerization time

Always pay close attention to the manufacturer's recommendations if you have purchased a new one-phase gel for nail extension. How to use the material, how long to dry the layers and other recommendations - all this is usually indicated on the package. On average, it takes 1-3 minutes for each layer to dry the gel in a hybrid lamp.

Why does the gel bake in the lamp?

In reviews of single-phase gels for nail extension, you can often find indignation about a burning sensation during drying. This is due to the fact that the material passes from one state of aggregation to another, and crystal lattices are formed. Chemical processes are accompanied by the release of heat.

It is enough just to reduce the lamp power (if this function is provided by the equipment manufacturer). When working with fixed lamps, you can simply remove your hand for a few seconds, allowing the heated material to cool slightly. As soon as the gel "seizes", the burning sensation will pass.

It should be understood that this is not a lack of material, but a technological feature.

Removal at home

This point is no less important when working with single-phase gels for nail extension. We figured out how to use the material, and now let's talk about what to do with extended nails that have grown a lot, are tired or have begun to interfere.

The first thing to remember is that soaking is not suitable for gel. Even if you wait half an hour, there will be no result. Gel, including single-phase gel, can only be cut off using a file with medium abrasiveness or a special cutter.

Frequently asked questions and answers to them

Most often, beginners ask themselves whether the products of a three-phase system can be used as a single-phase gel. Unfortunately this is not possible. But a single-phase one is suitable instead of a modeling or topcoat.

It is highly undesirable to perform with this material. In any case, you will need at least two gels of different colors, so what is the point of using a single-phase device? It is much easier to use a three-phase system.

Doubts are often caused by the possibility of using a single-phase gel to strengthen nails without building. For these purposes, the material fits perfectly. It can be used both as a base for gel polish and for repairing broken nails.

It's just that the hemorrhoid gel is not a drug, but has managed to establish itself as an effective anti-hemorrhoidal agent that eliminates the painful symptoms of the disease, reduces the severity of inflammation in the tissues of the anus and accelerates the healing of anal tears.

The unique composition of the Just Gel contains only non-aggressive substances, due to which it practically does not give side effects and has no contraindications, which allows it to be used during gestation and lactation.

What is a gel and how is it different from a cream or ointment?

Gel is a soft dosage form of a viscous jelly-like consistency, which is prepared by diluting a polymer powder and a neutralizing component in water.

Unlike a cream or ointment, a gel is prepared on a water basis, therefore it has a lightweight structure. Due to this, the gel easily and quickly penetrates tissues, does not cause discomfort, and does not leave greasy stains on the skin and clothes. But, despite the light structure, gels are not inferior in effectiveness to other soft dosage forms used for hemorrhoids.

The composition of gels can include both natural ingredients and substances of synthetic origin. Depending on the composition, gels can have the following therapeutic effects:

anti-inflammatory;
pain reliever;
decongestant;
antipruritic;
hemostatic;
softening;
regenerating;
venotonic;
immunostimulating;
antithrombotic and many others.

Thus, the following advantages of antihemorrhoidal gels can be distinguished:

instant penetration into tissues;
high efficiency of action;
locality of action, which makes the gel as safe as possible even for pregnant women;
ease of use;
availability.
softening the tissues of the anus and preventing the formation of anal tears.

Just a gel: composition, description of components and medicinal properties

The main active ingredients of Just Gel are extracts of such plants as aloe, geranium and pogostemon.

Also, the drug contains an auxiliary composition, which is represented by purified water, carbomer and triethanolamine.

The healing properties of Just Gel are due to the healing effects of its individual components, so we will consider them in more detail.

Aloe extract. Aloe extract is a biogenic plant stimulant, which is obtained from the plant of the same name by extraction. This extract has anti-inflammatory, radioprotective, antineoplastic, immunostimulating, antimicrobial and healing effects. In addition, aloe extract is an effective adaptogen.

Geranium extract. The stems and rhizomes of this plant contain a lot of useful substances (starches, carbohydrates, carotenes, alkaloids, vitamins, saponins, flavonoids, catechins, tannins and others). Due to such a rich composition, the geranium extract has a detrimental effect on pathogenic microorganisms and stops bleeding, which is very important in the treatment of hemorrhoids.

Pogestemon hood. Pogestemon or patchouli is a herb that is widespread in Asia, Europe and America. Patchouli extract is widely used in cosmetology and oriental medicine, as it has venotonic, antiseptic, anti-inflammatory, decongestant, tightening and healing properties.

Thus, due to the unique composition of Just Gel, it allows you to perform the following tasks in the treatment of hemorrhoids:

reduce the severity of inflammation in the tissues of the anorectal region;
relieve pain, itching and burning in the anus;
destroy pathogens and prevent hemorrhoid infection;
stop hemorrhoidal bleeding;
remove swelling of hemorrhoids;
accelerate the healing of anal fissures.

Instructions for use of Just gel for hemorrhoids

Simply, the gel can be included in the complex antihemorrhoidal therapy in order to relieve painful symptoms of hemorrhoids, eliminate bleeding hemorrhoids, as well as to heal and prevent anal tears. Before using this remedy, you must consult with a specialist who will determine the appropriateness of such a treatment, select the optimal dose and duration of therapy.

For hemorrhoids, the gel is used only externally or rectally using the applicator that comes with the medicine.

Before applying the gel, it is necessary to prepare the anorectal area, which consists in emptying the intestines, washing with warm water without soap and wiping the skin with a soft, lint-free cloth. After hygienic procedures, you need to wash your hands with soap and take a comfortable position - lying on your side or standing.

With external hemorrhoids

For external hemorrhoids and anal tears, the gel is applied in a thin layer to the external nodes and the skin around the anal ring 1-2 times a day, depending on the severity of the symptoms.

With internal hemorrhoids

With rectal hemorrhoids, a small amount of the drug is injected into the anus 4 to 6 times a day using a rectal nozzle, which must be pre-lubricated with any vegetable oil. After applying the gel, you need to lie down a little so that it does not flow out of the rectum.

The duration of the drug is determined individually, depending on the severity of the symptoms and the stage of hemorrhoids, but on average, the course of treatment takes 10 days.

After using Just Gel, you should thoroughly wash your hands with soap and water to avoid transferring drug residues to the mucous membranes of the eyes and mouth.

Are side reactions possible?

It's just that the gel has practically no side effects. It is extremely rare for patients to show signs of intolerance to the component of this drug in the form of such local reactions as itching and burning in the anus, redness of the skin, dermatitis and urticaria.

Considering the risk of allergy to Just Gel, a sensitivity test can be performed before using it. To do this, drop a little gel on the skin of the inner surface of the forearm and wait 20 minutes. If after this time you have itching, burning and swelling, then this is a sign of allergy to the drug, and you cannot use it to treat hemorrhoids.

When is the use of Just Hemorrhoid Gel contraindicated?

Contraindications to the use of Just Gel are as follows:

individual intolerance to Just the gel and its components;
acute liver failure;
acute kidney failure;
age under 12.

Can I use Just Hemorrhoid Gel in pregnant and breastfeeding women?

The drug acts only locally, so that its components do not penetrate the placenta and into breast milk. Considering this, this drug does not affect the development of the fetus and the child, therefore it can be used in the complex treatment of pregnant and breastfeeding mothers.

But, despite the high safety of this gel, it can be used only after consulting a proctologist. The doctor ascribes Just the gel to pregnant and breastfeeding mothers only when the value of the expected effect of the treatment outweighs all the risks to the fetus and child.

The cost of the drug

Simply, the gel can be purchased both in the pharmacy network and ordered in the online store from an authorized distributor.

The average price for a tube of Just Gel (25 grams) is 350 rubles.

In this material, we have collected the most common questions and tried to explain in detail all the nuances.

How is gel polish different from varnish?

First of all, the fact that it hardens only under the influence of UV rays, and after curing it forms a dense, durable film. This composition is more persistent, lasts up to 2-3 weeks. Has a more expressive shine.

What is the difference from a gel?

Gel polish is more liquid. It cannot be used to increase the length or change the shape. It is used as an improved, more durable analogue of nail polish. It is applied in the same way as a regular varnish, but cured in a UV lamp.

What is the difference between gel polish and shellac?

These are different names for the same remedy. Initially, Shellac is a brand of the American company CND, however, due to the popularity of the product, the name quickly spread to other products of this type. There is a myth that shellac is made from the organic polymer of the same name, but nothing of the kind is indicated in the composition of Shellac CND.

All popular brands of gel polishes in our catalog

How long can you walk with gel polish?

Usually 10-14 days. During this period, the nail grows significantly, and an open strip forms at the cuticle. Since the material cannot be corrected, in such cases it is removed and a new manicure is done. If the nail grows slowly and looks neat after 14 days, you can safely wear the coating for up to 25-30 days. It is not recommended to leave shellac longer.

How does gel polish affect nails?

When used correctly, it does not have any negative effects. On the contrary, all the time while you are walking with a manicure, it protects natural plates from scratches and chips. In some cases, mainly with improper use, it can stain the nail plate. Read more in this article.

Do I need to take a break between coats?

If you follow the technology, this is not at all necessary. Contrary to popular belief, the nail plate does not breathe and does not need a rest from decorative coatings. The break is recommended only in case of injuries to the nail or periungual area, as well as in case of any fungal or bacterial diseases.

How to take care of your nails after shellac?

If you use quality materials and follow the technology, no special procedures will be required. In order for the plate to receive all the necessary substances, it is enough to rub nutritious vitamin oil into the cuticle daily.

Can shellac be made at home?

Yes, of course, with all the necessary tools and materials, a manicure can be done independently. You can read about how to do it correctly in this article.

What do you need for shellac?

You will need: degreaser, primer, base and top, color, adhesive remover, UV or LED lamp. You can pick up each of the listed products in our online store or buy a ready-made kit. You will find a detailed overview of materials and accessories in this article.

Order everything you need for shellac in ready-made kits

How to choose a gel polish?

If you have a good primer, base and top, you can buy a color coat cheaper. A single-phase or two-phase composition should be chosen only of high quality. You can read more about the properties and characteristics of the brands presented in our online store in the comparative review.

What is the difference between three-phase and single-phase gel varnishes?

How to find out in which lamp and how long to dry gel polish?

Most coatings dry in fluorescent (UV), LED and CCFL lamps. Average drying time is 30-40 seconds for LED, 2-3 minutes for UV and CCFL. However, LEDs have a narrower radiation range, so some dense formulations may not dry well. Such materials are usually UV-labeled. There are also special gel polishes specially designed for quick drying (within 10 - 30 seconds) in LED lamps. They can be identified by the LED markings on the packaging. There are also combined drying LED + CCFL - absolutely all gel varnishes and gels dry in them. In each individual case, it is worth focusing on the recommendations of the manufacturers. You can learn more about the type of lamps and the principles of fixing in this article.

What is a "sticky layer" and why remove it?

During drying, a sticky film appears on the surface, it is also a dispersion layer. This film acts as double-sided tape and helps the layers adhere better to each other. After drying the finish, the stickiness is removed with a special liquid - a cleanser or degreaser. It is important to use only lint-free wipes for this so that there are no threads, lint and other debris left on the surface. There are no sticky finishes on sale. Such compositions do not leave a dispersion film, therefore, they do not require cleaning with a clinser.

Can the sticky film be removed with alcohol?

Alcohol really allows you to get rid of stickiness, however, at the same time it muffles the gloss and the manicure no longer looks so beautiful. Therefore, remove the sticky layer only with a cleanser or degreaser.

Why does nail art lose its shine after removing the adhesive film and how to avoid it?

If the dispersion film is removed too early or with an unsuitable product, the top layer can be damaged, micropores will appear on it, and instead of a glossy shine, the nail will be covered with matte islands or, at best, will fade. To prevent this from happening, do not remove the stickiness earlier than 1-2 minutes after curing, especially if you use non-professional materials or a low wattage lamp. Use only special solutions and lint-free wipes. If the gloss still fades, try applying the top in 2 coats, each dry, but remove the dispersion film only from the last one.

Why does gel polish hold poorly?

Most often, chips, cracks and delamination are the result of a violation of technology: improper preparation, refusal to use a degreaser or primer, insufficient fixation. Features of the nail plate, such as hyperhidrosis, can also lead to shellac flaking. To prevent this from happening, wet nails must be treated with a dehydrator.

Use special fluids to remove

How to remove gel polish?

Moisten a cosmetic napkin or sponge with a special remover, apply it to the nail, wrap it on top with foil or secure with a clip and leave it in this position for 10-15 minutes. Remove the foil and carefully separate the softened material from the nail plate using an orange stick. Never scrape with a metal scraper or pusher. If the shellac does not come off, reapply the sponge soaked in the remover to it. You can first carefully file the surface with a fine-grained nail file or buff.

How long does gel polish last?

Within 24 months after opening the bottle, some brands up to 36 months. The term may vary from manufacturer to manufacturer. The exact expiration date after opening and the date of manufacture, as a rule, are indicated directly on the package.

How / where to store gel polish?

What to do if gel polish is dry?

The thickened material can be diluted with a special compound. To do this, put a couple of drops of the diluent in a bottle, mix with a brush, close the bottle and gently turn it in your hands. You can't shake it! If the contents of the vial have become solid, it will most likely not be possible to reanimate it. For dilution, it is advisable to use only special formulations. As a last resort, you can add a couple of drops of a transparent top from the same brand to the bottle. This may make the color less saturated. It is impossible to dilute with alcohol or acetone - from this the coating loses its durability, dries worse, it can curl up and bubble.

Why does gel polish bubble?

When shaken, air enters the composition. Due to the dense thick consistency, air cannot escape on its own, as it happens with varnishes, water and other less dense liquids. To get rid of bubbles, the bottle must be opened and, without removing the brush, let it stand for 2-3 hours. Then, mix with a brush, close the bottle and gently, without shaking, twist in your hands.

How does magnetic gel polish work?

This composition contains the smallest metal particles that, under the influence of a magnet, change their position, due to which a gradient or glare forms on the surface. To make a pattern, you need to bring a magnet to the coating that has not yet cured in a UV lamp and hold it at a distance of 5 mm for several minutes. The effect obtained will depend on how long, on which side and to which area you brought the plate. Until the nail art is dry, the effect can be changed as many times as you like. Read more in this article.

How to choose a magnet?

Magnets can be flat or curly. Flat surfaces are used to create highlights, gradients, and cat-eye effects. With the help of curly, you can create only those patterns that are provided for by the shape of the magnet.