100 ways to lose weight 

Pompom from the edge of the hood. How to fluff a fur pom-pom? How to make a fur pom pom

Natural fur products are always expensive. Even fur decorations on ordinary things are not cheap. Therefore, it is more profitable, yes, and more original, to decorate the clothes yourself, since it is very simple to make a fur pompom with your own hands.

What you need for work

1. Fur trim (length and width depend on the desired size of the finished pompom). Better, of course, a whole piece.

2. Filler for toys - a small piece.

3. Ordinary needle with a strong thread in the color of fur trim.

How to make a fur pom pom

1. Cut out a circle (or oval) from the fur

How to make a fur pom pom. Step 1

2. We sew along the edge, stepping back a few mm, with a regular seam (“needle forward”).

How to make a fur pom pom. Step 2

3. Periodically tighten the thread, pulling the fur.

How to make a fur pom pom. Step 3

4. It turns out a fur ball.

How to make a fur pom pom. Step 4

5. We take the filler and “fluff” it.

How to make a fur pom pom. Step 5

6. We put the filler in the fur.

How to make a fur pom pom. Step 6

7. Tighten the thread carefully and fasten it.

How to make a fur pom pom. Step 7

8. It turns out a fur pom-pom.

How to make a fur pom pom. Step 8

We examined the simplest, at the same time interesting and successful options for making pompoms for adults and children's hats. Everyone will choose the ideal option specifically for their case, and bring the idea to life without any problems.

Working with fur is quite difficult, but if you decide that you can handle the task, you need to stock up on special tools. For work you will need:

  • furrier knife;
  • hand needles for fur, thread;
  • thimble;
  • round pattern;
  • soap or chalk;
  • sintepon.

A furrier's knife is used to cut the skin. Doing it yourself without experience and special skills is quite difficult. Professionals never use scissors! They cut only on the mezdra, it is impossible to work on the fur side.

To protect your fingers from pricks, use a thimble.

Use cardboard to make patterns. It is best to make the template round, so it will be easier to assemble the cut part into a ball.

A thin piece of soap or crayon is needed to draw the outline of the template onto the surface of the skin.

The synthetic winterizer will act as a soft filler for the pompom. If it is not available, you can use cotton wool or pieces of cloth.

Fur selection

Different skins have their own margin of safety. The fur of the otter is considered the most durable, followed by sable and mink. Rabbit fur wears out the fastest. But since the pom-pom does not constantly come into contact with surfaces, this characteristic does not matter much.

If you are not a very experienced needlewoman, it is better to take soft fur (mink, fox). It will easily fold into a ball. And a dense one, for example, a muton, does not fit well and bristle. In order to give such a pom-pom a round shape, you first need to make several tucks on the pattern from the edge to the center. And only then pull it into a ball.

Important: Trimming should be done with the utmost care to trim the hair as little as possible. The fewer hairs are trimmed, the more inconspicuous the seam will be.

When working with fur, special needles with a triangular tip are used. An ordinary needle can not pierce thick leather tissue. Needle and thread should be selected according to its thickness. When working with fox or fox skins, thread No. 80 is used, for thin ones, for example, rabbit - No. 50, 60, for the rest - No. 40, 50. The threads are selected taking into account the color of the leather tissue.

Fur selection

The main thing to pay attention to is that the fur does not come out with every touch. This indicates its low quality.

Making a chic fur pom-pom with your own hands

If you want to add an original accessory to your wardrobe, then try to make a fur pompom for a hat with your own hands. Modern fashion only welcomes the use of fur accessories.

Work materials

The process of making a pom-pom is divided into several important steps, but it all starts with the purchase of a piece of artificial or natural fur.

Also required for work:

  • soap or pen;
  • round pattern;
  • threads in the tone of fur;
  • needle;
  • sharp scissors;
  • a piece of ribbon or lace;
  • sintepon as a filler.

Every girl at home has an old, already unnecessary thing made of fur. So, if you decide to make a pompom from a grandmother's hat or collar, you will have to prepare the material so that the product looks neat and beautiful as a result.

Follow this pattern:

  • Wash. Prepare a solution for this, consisting of 1 teaspoon of ammonia, 2-3 tablespoons of salt, 1 spoon of hair shampoo, 2 tablespoons of soda and a liter of warm water. Soak the fur in it, use a small brush to clean it. Then rinse off the remaining solution with plenty of running clean water, let the fur dry naturally.
  • Coloring. If you are not satisfied with the color of the fur, then it can be easily changed. Use ordinary hair dye for this. Prepare the paint of the desired color according to the instructions in the box, apply it to the fur. Perform all manipulations with gloves in order to rub the paint into the fibers as best as possible, this will also prevent the appearance of unpainted areas. Wash off the paint after the specified period of time.

At this stage, we will consider in detail how to make a fur pom-pom for a hat. The master class below will allow you to do all the work efficiently and quickly:

  • Lay the fur on a flat surface with the base up. It is advisable to fix it with pins, for example, on an ironing board.
  • Using a round pattern, such as a cup or saucer, draw a circle on the surface.
  • With sharp scissors, carefully cut out the circle, being careful not to damage the fur underneath. If using scissors is inconvenient for you, use a clerical knife.
  • Take a needle and thread, sheathe the base with large stitches in a circle. Make sure that in the process of working, the thread is always inside the circle, while the front side is not visible.
  • Secure the thread with securing stitches.
  • Determine by eye how much synthetic winterizer is needed to fill the pompom, then tie it with a ribbon or cord.
  • Sew the circle to the very end, tighten the thread, thereby forming the future decoration.
  • Place the synthetic winterizer inside the pompom, leaving the tails of the tape outside, tighten the thread to completely close the hole.
  • The remaining ends of the ribbon will come in handy for attaching the product to the hat.

In general, making a pom-pom with your own hands is an easy and quick task. And most importantly, low cost. After all, a hat will cost less, and you can take any material. Yes, you can use faux fur or scraps of natural material. That is, the one that was found at your fingertips at home.

  • You need to take the material that is not damaged and, most importantly, does not “climb”. In other words, run your hand over the fur - if there is a lot of pile left on your hand, then it is better to put it aside. Better yet, send it to the trash, because such a quality speaks of the unsuitability of the material.
  • Now you need to decide on the size of the pom-pom itself. But keep in mind that in the process of work it will shrink. We do all the work from the wrong side! We draw an even circle (for this you can choose the appropriate stencil or use a compass).
  • You need to cut the material exclusively with a scalpel or a clerical (very sharp) knife. Scissors are not suitable for this purpose, as the integrity of the fur can be damaged.
  • After that, large stitches are made along the edge of the mezdra (leather tissue).
  • You can begin to tighten the thread a little already in the process of stitching. Just do not overdo it, so as not to damage the fabric itself and break the thread.
  • Now we take the filler. It is more often and more practical to use a synthetic winterizer, but foam rubber or cotton wool is also suitable. Places it in a rounded fur, and continue to tighten the thread.
  • When the thread is completely pulled together and the fur comes out in the shape of a pom-pom (circle), we fix the thread. By the way, it can also be used to fix on the cap.

Sewing instructions

After everything is ready to go, we proceed to the master class on making a pom-pom.

Main stages:

  • template making;
  • cutting;
  • sewing;
  • pompom filling;
  • cap fastening.

Draw a pattern on cardboard. When making it, keep in mind that the initial diameter should be 3-4 cm larger than the diameter of the finished product. Put the cut out pattern on the fur flap and circle it with soap or chalk.

When cutting, the size of the fur is important. If it is a large collar, it is easy to cut a circle of the desired diameter and start sewing. There will be no problems how to make a pompom from a fur collar.

When using a narrow edge or fur strip, they need to be cut into several parts and sewn with a furry stitch into a single canvas. Then you can start cutting.

Before cutting, it is very important to determine the direction of the pile. With a long pile, this is not a problem. Move your hand shortly. If the pile lies in the right direction, it will look smooth.

After cutting out the part, walk along its contour with a thick thread with a seam “over the edge”. The thread should be of such a size that you can leave a small part of it at the beginning, and the same part when returning to the starting point.

By pulling on the ends of the threads, you will begin to pull the fur into a ball. In order for the filler to acquire the necessary density, knock it down in your hands, fill it with the future pompom. Tighten the edges as much as possible so that the filler does not fall out during wear. Double knot secure the ends of the thread.

You can sew a pompom on a hat. To keep it well, fasten it at least 4 points.

Knowing how to make a pompom from a fur trim or a strip of fur with your own hands, you can decorate your headdress and always look fashionable.

Making your own yarn pom-pom

If you liked the idea of ​​how to make a pompom on a fur hat, but there was no suitable material at hand, then use ordinary threads. You can make a decor for a headdress from ordinary yarn, and you will also need rectangular or round patterns to complete the work.

In principle, you can make a template yourself.

First, prepare a piece of thick cardboard, a ruler, sharp scissors, a pen, yarn and an awl. The order of work looks like this:

  • Cut out two rectangular templates from cardboard. Note that the bubo will be the same size as the width of the rectangle. Leave a few inches to spare.
  • Take a ruler, determine the center of our rectangle, at this point make a puncture with an awl. Then, on the right side, cut it to the puncture point.
  • Pierce the rectangle on the left in two places at a distance of a few centimeters from the edge, make cuts with scissors.
  • Pass a long thread through the needle, fold it in half, thread it into the finished template.
  • Wind the thread from the ball onto a cardboard template.
  • Move the wound thread to the right, towards the large cut.
  • Then tighten the yarn with a needle and thread as tight as possible.
  • In the center, sew the pom-pom several times, fasten the thread, but do not cut it.
  • Insert scissors between the two templates, carefully cut the threads.
  • Remove the product from the patterns, straighten it properly and trim with scissors.

All is ready! It remains only to sew the pompom to the hat with a needle and thread.

In this case, use threads of several colors that are combined in color and texture with each other. With this element, you can not only decorate the hat, but also make the interior more comfortable.

Take, in addition to yarn, a sheet of thick cardboard, two cups with different diameters, a compass, a needle, and scissors. The manufacturing scheme is as follows:

  1. Cut out two identical rings from cardboard.
  2. Put them together, then wrap with thread.
  3. Wind the threads to the desired thickness, then insert scissors between the rings and cut the threads along the outer edge.
  4. Trim the product with scissors, sew it to the headdress.

How to make a pompom from natural mink, arctic fox, fox, silver fox, raccoon fur for a hat: description, photo

To begin with, you should pay your attention to the variety of materials from which you can sew a pompom. Due to the fact that this is an accessory, especially not in constant contact with surfaces, most fur quality factors do not play a role. The only thing that professionals warn about is that you should take care that the pile does not come out with every touch, because it is likely that one day you will think about washing a product with a pompom, and after this procedure, suddenly only a short-haired base will remain. Otherwise, you will sew from mink, rabbit or muton - the choice is yours.

  • If you use artificial material, it is likely that you will not have to worry about its safety in subsequent use. But with natural fur, not everything is so simple: experts advise washing it before starting work, especially if the skin is dyed, and there is a risk of subsequent molting.
  • The composition of a homemade soft solution for cleaning fur is as follows: detergent and salt are mixed in equal proportions (1 tsp each), 1 liter of warm water is added, as well as soda (1.5-2 tsp). The liquid is applied to the fur with a brush, after which it is carefully distributed in the direction of growth and washed off with warm clean water. It is necessary to dry the fur in a horizontal position, without using high temperatures: no hair dryer and battery.

Ironing the flap is also undesirable, but if it is required, turn on the steam supply and iron from the wrong side. After the patch is ready to work, it can be dyed if necessary: ​​craftswomen recommend using regular ammonia hair dye. Or immediately start cutting. But for this, you also need to know some nuances.

  • First, pay attention to the direction of the pile. For a long one, this is done very simply and by eye, but for a short one, you need to hold your hand. If the pile lies smoothly, you have correctly determined the "course". Opening against this direction is prohibited.
  • Secondly, remember that fur is never cut with scissors, regardless of who owns it: this can only be done with a knife, razor or scalpel. Of course, this is a little longer and more difficult than with scissors, but the latter often damage the pile, as a result of which the finished product looks extremely untidy.

Professionals say that the pile should look down on the finished product, but this rule can be ignored. Especially when it comes to a round pom-pom, with which it is easy to get confused where it has the top and where it has the bottom.

Of course, the general scheme of work for all such handmade accessories is the same, however, if you want to decorate your hat with a fur ball, you can make some mistakes and make the wrong side not too clean, since the pompom will be sewn to the fabric with this point, which means that all the flaws hidden.

  • To work, you will need a large piece of fur (about 15 * 15 cm or more, depending on the idea), as well as a thick thread, cardboard (the same dimensions as fur), a strong needle with a large eye, a knife or scalpel, crayon or soap, as well as a soft filler. A synthetic winterizer usually plays its role, however, if it is absent, you can take even the most ordinary cotton wool or just pieces of fabric.
  • Draw a template for the future pom-pom on cardboard: it is best to make a circle, since a square cannot always be assembled correctly. Keep in mind that the product will be pulled together, so the original diameter must be larger than the final one. For example, for a pom-pom with a diameter of 7 cm, it is recommended to cut a circle with a diameter of 10 cm. Any flat object of the desired shape can be used as a guide.
  • Cut out the template, attach it to the fur flap from the wrong side, circle with chalk. Using a sharp blade, trying not to deepen it and work only with the base, repeat the outline of the template, cutting out a circle. It is recommended to do this with minimal pressure: it is better if you follow this “route” several times, but you are guaranteed not to damage the pile.
  • Thread a thick thread into the eye of the needle and, keeping it single, walk along the contour of the product with a seam “over the edge”. At the same time, be sure to save a small tail of the thread at the very beginning, and make sure that after returning to the same point, you can also leave the same piece.
  • With the same thread, begin to pull the fur into a voluminous ball. Knock down the prepared filler in your hands so that it becomes as dense as possible, push it inside the future pompom, and tighten the edges as tight as possible. The hole that remains must be very small. Tie the ends of the thread with a double knot, use a needle to remove it inside, interlacing with stitches.

When sewing a do-it-yourself pompom on a hat or beret, make sure to do it at least 4 points, especially if the decoration is large. And if you get a very large hole, go over it with a needle with a thread threaded into it, creating a crosswise pattern: this kind of barrier will not allow the filler to fall out.

In principle, we have already mentioned above that for technology it does not matter what material the fur will be made of. And will it be natural at all? But we want to give a few more recommendations (more precisely, small tips).

  • The ideal shape is considered to be a circle, but for a pom-pom, you can take any geometric shape. Especially, keep this in mind when you take scraps.
  • If there is neither a scalpel nor a clerical knife at hand, then this can be replaced with the simplest blade. Once again, the scissors can damage the fur itself. You need to cut on a wooden or plastic board (so as not to damage the table).
  • After you cut out the desired shape of the pompom, you need to pull the material into one ball. The needle must be thick so that it does not bend during operation. After all, the material of the skin is very dense.
  • By the way, you can take a strong thread and fold it two (or more) times. Just make sure that the eye of the needle is wide enough for the thread to go through the hole.
  • We do not fasten the thread either at the beginning or at the end of the work! Moreover, in order to make it more convenient to tighten our circle, leave a little thread.
  • Some filler is placed simply in the skin, and some are pulled together with a ribbon. This is necessary so that when tightening the fibers do not fall under the thread and do not interfere with smooth operation.
  • After the fur is completely tightened, this ribbon is removed. And you can do it differently. We fixed the thread without removing the tape. And it is used to attach to the hat.
    • By the way! Think also about the fact that it is in harmony with the fur itself. Yes, the ribbon will not be visible, but the red ribbon will be slightly visible through the white hat and light fur (for example).

The rabbit is a very affordable material, which is also a pleasure to work with. No, you can't wash it in the washing machine either. Yes, and it is desirable to clean better with dry substances. Above, we have already indicated examples of how to clean the fur (if it requires it). The rabbit is not picky.

  • If you want to make a rabbit pom pom, then no additional steps are required. In the same way, we clean or soak (new skin). You need to dry only in the shade and in a place where there is good ventilation (but not in a draft).
  • You can cut out a circle or another piece of material (which comes out to you).
  • Here is a small difference - this is cutting. The rabbit can be carefully cut with scissors. But be careful not to damage the fur and villi. If it is not convenient or does not work out, then use the usual tool - a clerical knife.
  • Further, stitches were made again and the fur was pulled off, placing a synthetic winterizer inside. This material, by the way, does not roll and stray. It tolerates washing remarkably, unlike cotton wool (it quickly gets into a ball) or foam rubber (this one can be quickly damaged in general).
  • Finally, attach the pom-pom to your chosen hat.
    • Please note! I would also like to add that at least take 8-10 cm of fur (in diameter). This is for a small pom-pom. If you want to make it large, then you need to make a pattern of at least 15-20 cm in diameter.

Faux fur does not look as rich and may not last as long. But it’s a little easier and faster to work with it, especially since everyone definitely has faux fur at home. By the way, such fur can be washed even in a washing machine. But consider also the length of the pile itself. And yet, it is still better to do such a procedure in a laundry bag.

  • All actions are completely identical, as in all previous options. Drawn and cut out.
  • By the way, such fur is even convenient to cut with ordinary scissors. But they must be very sharp, and be careful not to get carried away and cut the villi.
  • The thread in this case can be taken already with a less durable thickness, the simplest thread will do. But do not use cotton fibers - they tear quickly!
  • Fill the resulting circle with filler and suture tightly. When washing, faux fur can be washed with the hat. Therefore, the pompom was attached to the headdress itself with the same thread.

Pompoms make great animals. Moreover, the fur only gives naturalness to the product. This is the easiest way to make a brooch - sew on eyes and make a mouth for the animal you like.

  • By the way, these brooches can even be attached to hair clips. It will look very original.
  • Do not be afraid to experiment and turn on your imagination - you can add ears and even a torso to animals.
  • In general, a small pompom in a composition with stones will look beautiful.
  • Or make a flower (from stones or beads), and take the pom-pom by the core.
  • You can even make a flower from them. Or make another pom-pom arrangement. The main thing is to turn on fantasy and imagination.
  • As an additional (or main) material, use felt. It is easy to work with and the decorations are very colorful.

How to make a fur pom pom for a hat?

  1. We have already said that all procedures are similar. I would also like to add that the fur can be fixed, for example, on an ironing board. This is required so that the fur does not slip. Draw a circle with soap (you can even take a regular plate or saucer as a basis, depending on the size). After all, keep in mind that about 1 cm in diameter will go to the seam and fastening.
  2. The most painstaking task will be cutting. Again, we repeat that do not be discouraged if you do not get a perfectly even figure. It will not affect the appearance at all. It is extremely inconvenient to cut fur from arctic fox or silver fox, fox or raccoon. They have thick and long fur, which, of course, must not be damaged.
  3. Therefore, cut only with a scalpel or utility knife. And then, with small and careful movements, so as not to damage or cut off the wool itself.
  4. And then, using the above technology, make straight stitches around the entire perimeter of the fur, pull off the ends and fasten the thread. Just do not forget to place the filler (synthetic winterizer ideally) to get a stable and desired volume.

I would also like to add a few words about the material itself - mink fur. It is quite easy to work with him, because the pile itself has an average length. Therefore, with careful manipulation, the fur will remain safe and sound as much as possible. Yes, and yet, in the process of tightening the thread, smooth wool does not interfere with the work process.

What should be done? First of all, make the pom-pom itself, as we indicated above. Sew one half of the button to the hat, and the other to the pompom. By the way, use the same thread with which the pom-pom was attached.

How to fluff a fur pom-pom?

It happens that after washing or even wet snow, the fur may slightly go astray. That is, to lose their natural splendor. It is not necessary to run to specialized places to eliminate that cause; you can also eliminate this defect at home.

  • It is advisable to carry out such an action with a special brush. Its difference is that the crests should be long and sparse. Some craftswomen even make their own devices from thick needles or ordinary pins.
  • If at home there is nothing like this at hand, then take a regular comb. Well, or a comb. With long and sparse teeth.
    • By the way! I wanted to clarify whether the arctic fox, mink or Montenegrin (for example) can lose their shape after rain. But do not rush to comb them right away, just let them dry well. It is important to keep the mech away from the battery! Yes, and in general it is forbidden to dry fur products on the battery or near it!
  • Alternatively, you can steam the fur well. It is not necessary to buy a steamer, you can hold the pompom over a boiling kettle. Or use, if available, an iron with vertical steam. But don't get too close. The fur tolerates low temperatures well, but it is a little afraid of high ones.

How to buy ready-made fur pompoms for needlework in Aliexpress?

Aliexpress has already established itself as a cheap online store. Yes, the prices there are really very pleasant, but, however, sometimes you have to wait a very long time. On average, delivery takes at least 2 weeks. If we talk about how to buy fur pompoms on this site, then the answer will be insanely simple.

  • To get started, of course, you need to register. Well, then, log in to the site. In order not to search for a long time, we drive the desired product into the search bar (where the magnifying glass icon is).
  • We found the right price for the product. But consider also the rating of the store. It can say a lot about the integrity of the seller. After selecting the product, proceed to payment.
  • Now you need to click on the orange "Buy" button, the page will be redirected. Then you need to click again on the orange button, but with the name "Checkout". And it remains to fill in all the required fields. Please fill in the address field very carefully. Remember, you need to write names only in Latin letters.
  • Then it remains only to press the "Save" button. If you are buying for the first time, then the line will have the following name: "Save and continue to send to this address." But for convenience, you can pre-create the desired address in your personal account.
  • And now it remains only to wait and track the parcel. It can be found in the column "My orders". We remind you that for this you need to click on the inscription in the upper right corner “Hello! And a name."
  • And then just click "details" next to the desired package. You should see the invoice number, and from it you can find out where your pom-poms are.

Please note! The pom poms pack very compactly. Therefore, we are not afraid. Once opened, they will fluff up instantly. Moreover, natural fur does not lose its shape even after compression.

Fur pom-poms are a great accessory for warm winter things. Often they are decorated with hats and scarves for children. But girls are not averse to wearing things with a fur detail. It looks bright and trendy.

  • fluffy fur,
  • cardboard/paper,
  • scissors,
  • stationery knife,
  • needle,
  • strong threads (under the color of fur),
  • pen,
  • lace or ribbon
  • sintepon,
  • compass.

Step-by-step instructions "Do-it-yourself fur pompom"

Step 1

We draw a circle of the desired diameter on paper or cardboard with a compass. If there is no compass, we circle the bottom of the jar with a pen. Using scissors, cut out the resulting template. The larger it is, the more voluminous the pompom will be.

Step 2

Now we apply the pattern to the back of the fur. We also circle with a pen and cut out with a clerical knife along the contour.

Step 3

We sheathe the circle with large stitches with threads over the edge. The ends of the threads do not need to be fastened.

Step 4

A synthetic winterizer (cotton wool or foam rubber) will add volume to the product. It must be rolled into a ball, tied with a ribbon.

Step 5

Leave long ends of the tape. So you can attach the pompom to the product.

Step 6

Tie the threads to a strong knot and sew up the hole if it remains. If you do not need to leave the tape outside, then the synthetic winterizer can not be rolled up. It is enough to push the filler inside with a knitting needle until the desired volume of the product is obtained.

In general, fur waste, fur collars, hats are suitable for making pompoms. They can decorate more than one thing. The most interesting version is a one-piece pom-pom scarf.

It's elegant and luxurious. So pompoms can give chic to old things. They can be made in any quantity and any size with your own hands.

A lot of original ideas appear in restless craftswomen at the sight of pompoms. Experienced knitters can create a huge number of unique and inimitable gizmos with their help. These products have only one drawback - their high cost. And if you make a pompom out of fur with your own hands, taking scraps from an old hat or collar? For skilled needlewomen, such work will not create difficulties.

So, fur pompom - how to make? Now let's figure it out! After all, the process of creating a fluffy accessory is quite simple and does not require serious skills.

What are pompoms used for?

These fluffies can decorate a children's scarf, hat, mittens.

If you make several small pompoms, then it is quite possible to decorate interior items with them, such as pillowcases for sofa cushions, a blanket, etc.

A rich and luxurious stole will turn out from a large number of similar details - it will take a lot of time to create them, and the work will be difficult, but the result is worth it.

Nowadays, various fur ornaments are considered very fashionable - brooches, key rings, hairpins. They look very interesting.

Tools and materials for work

If you follow our description in the process of creating pompoms, there will be no difficulties, but this activity will bring joy. How to make a fur pom pom? Make a few things with your child - he will be happy!

In order to make a do-it-yourself fur pom-pom, you need to prepare the following tools and materials:

  • Pieces of quality fur - artificial or natural, whatever it is.
  • A piece of thick cardboard from which you will cut out a pattern using a compass.
  • Needle with very strong thread.
  • Knife or scalpel for cutting the flesh.
  • Sintepon or cotton wool - to add volume to the pompom.

And, of course, stock up on sharp scissors.

In the absence of experience with fur, take softer fur - mink, fox. This texture is much easier to assemble into a round shape. Mouton pom-poms are more difficult to make and will bulge, pucker, and look messy. Experienced craftsmen on patterns make tucks in the direction from the edges to the middle, sew them together, and only then tighten them into a ball. This is a rather difficult task, not suitable for inexperienced craftswomen.

Pay attention to the absence of damaged places on the fur piece, the pile should not “shed”. To check, you just need to run your palm over the fur and assess the condition of the flap.

Each skin has its own strength. The most wear-resistant are the otter, mink. Next to them is sable fur. The most tender and fragile is the rabbit. For example, pompoms on hats interact little with other surfaces, but a scarf constantly rubs against clothes. Also, the finishing of bags, sofa cushions undergoes mechanical damage. All this must be taken into account when choosing a material for a particular product.

For example, mink is a fairly easy material to work with. The fur has short elastic fibers, it is very convenient to carry out various manipulations with it.

Rabbit fur is also an affordable and pleasant material for making natural fur pom poms. Yes, the fur is delicate and cannot be washed, but this is not a problem either. Below we give a description of the way out of this situation.

It is much easier to cut a blank from these types of fur than if you take a long pile material. You can even use scissors with round tips.

Preparing the pom pom skin

So, you decided to take on the manufacture of a pom-pom yourself. When using old skins that have faded and lost their color, you can simply dye them with ordinary hair dye.

Before that, clean the pile from contamination, otherwise the absorption of the paint will be uneven and you will get a poorly dyed product with stains and stains.

Let's wash the fur. To do this, prepare the following composition:

  • water - 1 l;
  • washing powder - 6 g;
  • ammonia - 7 ml;
  • salt and soda - 10 g each.

We dissolve all the ingredients in water and gently apply to the fur with a soft brush, hold for five minutes and rinse with plenty of water.

Now you can start coloring. Be sure to apply the composition to a small piece of fur to see what shade you get as a result.

Take a paint darker than the color of the fur itself, otherwise the result may be unpredictable. For example, mink fur gives an unpleasant yellow tint when lightened.

Mezdra must first be treated with glycerin or a greasy cream - this will prevent drying and damage to its paint.

Do not rush, apply the coloring composition evenly, on the entire surface of the pile. Follow the instructions attached to the paint - the composition of animal hairs is similar to human hair, so all processes proceed the same way.

After curing the paint, rinse the fur in water, carefully washing out all the particles of the dye, and in order to fix the result, place it for a while in a weak vinegar solution. It is permissible to apply a balm or use a conditioner.

After all the water procedures, dry the fur piece by spreading it on a soft towel. In no case do not use hair dryers or fans - the fur will become brittle!

How to make a fur pom pom for a hat

That's all, you have prepared the fur, it remains to do the most important thing. Let's start making pom-poms!

To get started, prepare a pattern - for this, draw a circle of the required diameter on cardboard. It will be 5 cm more than required for the pompom.

Now put the pattern on the mezra and translate with a piece of chalk, soap, a pen - it doesn’t matter, everything will remain inside the finished pompom.


In cutting, the size of the fur segment is very important - it is much easier to cut out a circle of the desired radius for a fur pompom from a large one. How to make it neat and beautiful - will be described later.

Also an important criterion is to determine how the pile is directed. If it has a long length, then this does not play a special role, but for short hairs this is important.

When cutting, use a scalpel, clerical knife. It is advisable not to work with scissors - you can damage the fur.

Having cut out the desired piece, sheathe it with large stitches along the edge. Do not make a knot at the end and do not fasten the thread at the end. Further, by pulling on these tips, you can pull off the part. To add volume, put a piece of the prepared filler inside and finally tighten the thread. Tie the thread tightly and hide it inside the pompom.

All is ready. It remains to sew it to a hat or scarf.

Fur products with long pile

A long pile greatly facilitates the work on the one hand, but also brings its own difficulties on the other.

For example, the advantages are that it is not necessary to cut a pattern in the shape of a perfect circle - here everything will be hidden under the fur.

It is necessary to cut it with a scalpel or a special knife, since the blades of the scissors can easily ruin the villi. Cut on wood or plastic, avoiding damage to furniture.

It is better to tie a piece of filler with a ribbon in the color of the pompom - it will not allow it to get into the tightened thread.


After everything is tightened and tied with a few knots, the tape can be removed. But sometimes it is left to attach the pompom to the desired place.

Long hairs can get under the thread and confuse, or maybe even tear it. Check it very carefully - ugly fur folded inward and protruding threads, even if they match in shade, look terribly sloppy!

Fur pom pom

It’s good when there is a large flap of fur, but if only trimmings, and even those narrow or irregular shapes? How to make a fur pompom on a hat in this case?

If there are several small pieces, simply sew them into a rectangular panel with furry stitches. Then, it will be possible to make a pompom out of it using the above technique.

A pompom from a strip of fur can be made as follows: fold it in a spiral and sew it, getting a round piece. The further course of events is the same as before.

Removable pompom

Such fluffy is completely indistinguishable from ordinary ones sewn to a hat or scarf. But in the care of such products is much easier. After all, it is much more convenient to simply unfasten the fur, wash the thing, and then fasten it again. There is no need for constant sewing and cutting.


The only important rule here is that the button must match the pompom. It should not be visible, but it should also hold very well. Otherwise, you will simply lose your pom-pom on a windy day.

How to make such an accessory? Simply and easily! The pompom is created in the same way as described earlier, and the button is unfastened and one half of it is attached to the hat, and the other half to the pompom.

Faux fur pom-poms

Such a product does not have such a rich appearance, but such pompoms are very much in demand. Faux fur is much easier to work with and more affordable. Washing is possible even machine.


You act similarly to the description suitable for natural fur. For cutting, take scissors, cut with the very tips, avoiding touching the pile.

The thread is not the strongest, ordinary enough for sewing.

Washing together with the product is acceptable, because of this, artificial parts are sewn directly to it.

Fur pompom... How to make it, we figured it out. And what it will be - natural or artificial, large or small - you decide!

    It is not difficult to make a fur pompom with your own hands. To do this, you need to take a small piece of fur and put a little synthetic winterizer inside it. Then pull off the synthetic winterizer with fur and carefully sew up this design, you get pretty cute and fluffy pompoms with which you can decorate a hat, shawl or winter jacket.

    In order to make your own fur pompom, nothing special is required. First, take your preferred piece of fur and cut a square out of it on the back with the blade of a clerical knife. Next, sew around the perimeter with a thread with a needle like this:

    We take a fragment of fur - a mezdra with a pile. We cut out a circle along the mezdra with a diameter of about ten centimeters, it can be less - it all depends on how large the pompom you are going to depict

    Pour on the edge of the mezdra of the same diameter of fabric, hemming it along the edge. Make a soft filler out of it (it can be a piece of foam rubber) Wrap it with the flesh inside, and hem it in one place. The fur turns out sticking out from the ball in all directions.

    It's very simple. We take a piece of fur and stitch its sides with strong threads. Then we pull it together to make it look like a pom-pom. And at the end we fix our creation with a couple of knots.

    Here is a good video instruction (you can immediately rewind to 1:38 minutes to get straight to the point):

    DIY fur pompom

    In order to make a pompom out of fur, you need to choose the fur you like, cut a circle of the desired diameter out of it, you need to do this with a clerical knife, then the fur will not be damaged. Then you need to sheathe the circle with large stitches over the edge:

    Now you need to take a synthetic winterizer that would fit all into a pompom, and tie it with a ribbon so that it does not fall apart while we pull the fur into a ball:

    After the synthetic winterizer is in a circle of fur, you need to tighten the threads (which remained after sheathing), we tie the nati into a knot. If a hole remains, then it should be sewn:

    Such pompoms can be made not only from natural fur, but also artificial. And ready-made pompoms can be sewn to the selected hat.

    To make a pompom, you do not need to make a lot of effort, for this you need a thread and a needle and a piece of fur, you fold it into a ball, so that you get a ball or rather a pompom and stitch it carefully. It is also best to make a light lining for it, which will simplify your efforts.

    You can for example like this:

    Take a piece of thin leather with fur. Lay it down with the fur, and up with the empty part. Put something on top, such as a crumpled rag or something soft and ball-shaped, the same size as you want your pompom to be or a little smaller. Then you lift the edges of the skin and wrap with this skin what you put on it. When wrapped, you can first bandage something to make a kind of bag. Then sheathe it all with threads, so that even without dressing this structure holds and does not unfold. Then untie the dressing and cut the edges of the bag. And we get a pompom, wool out.

    Fur pom-poms on knitted hats are very relevant this season. And, not only on children's hats, but also on adults too.

    It would seem that such a trifle is a pompom, but how it decorates the product!

    fur pompom can be made from any fur that you have at your disposal. It could be fur mink, And muskrat, And marmot. And the long-haired fur of a red or silver fox, white or blue fox, raccoon or opossum.

    And it is not at all necessary that it be a full-fledged fur skin. Fur waste, and old fur collars, cuffs, hats will fit to make a pom-pom.

    It is also important that do it yourself You can make a fur pom pom in any size. To do this, cut out a circle of the desired diameter from the fur, sweep large stitches along the edge of the mezdra (leather tissue) with a needle with a harsh strong thread and gradually begin to tighten the thread.

    As our blank begins to take the form of a pom-pom, we fill the resulting cavity with filler. As a filler, you can use synthetic winterizer, foam rubber and even cotton wool. When the pom-pom is completely filled with filler, tighten the thread tightly and fasten it. With the same thread, the pom-pom can be sewn to the hat.

    The finished pom pom will look like this:

    In addition to hats, scarves, stoles, ponchos and other products can be decorated with fur pompoms. And can you do scarf or entirely from pom-poms. It will be luxurious!

    With a pompom, you can decorate not only a children's hat, but also an adult one.

    Fur pom pom can be made like this: