Crochet crochet pattern for autumn. Crochet summer berets for beginners: patterns with photos and videos. Crochet knitted berets - options in pictures
Crochet berets have been knitted at all times. The types of knitting that can be created with a hook are ideal for voluminous headwear options. For those who own the technique or are just learning the craft, a selection of crochet berets.
Adorable crochet beret
The combination of several knittings is a distinctive feature of a crocheted beret. An openwork strip insert adds sophistication and femininity.
Size: 56cm.
Prepare:
- Polo-Zitron yarn (60% cotton, 40% acrylic, 140met / 50g) - 1 skein;
- hook No. 3.5, No. 4, beads in the color of the thread.
Density: 15 p. \u003d 10 cm (openwork).
Main pattern: crochet. No. 3.5, knit with single crochets in a circle, clinging to two walls. To increase, knit 2 columns from 1 loop of the base.
Openwork pattern (hook No. 4): a multiple of 5 plus 1 plus 3 air stitches for lifting. Follow the pattern, start with the loops before the rapport, then knit inside the rapport, finish with the loops after the rapport. We repeat 1 time from the first to the third p., Then only the second and third p.
Crochet beret pattern:
- Make a chain of two stitches and complete table 7 on them. b / n in the first air.p. In the second r. double the number of loops (= 14 stitches). Continue knitting the beret with the main pattern, making increases in each row. 7 st.b / n until the diameter of the circle is 26 cm.
- Next, knit without adding 4 p. pattern with openwork (= 5.5 cm).
- Go back to the main drawing and start decreasing loops as follows:
1p.: every 15 and 16 p. together;
2p.: every 14 and 15 p. together;
3r.: 13 and 14 p. together. - Then knit 2 cm without reduction.
- Tie the edge of the beret with the "step step" technique.
- Openwork embroider with beads in random order.
Winter beret with a flower
For the cold winter season, you can crochet an angora beret and decorate it with a knitted flower. Would need:
- Angora yarn (125met / 25gr) - 3 skeins of light beige and dark beige;
- hook number 3.25.
Description of crochet beret:
- Knit from the top of the beret with a spiral in dark color st.b / n for the back half-loop according to scheme A (in all r. Add 6 st.b / n each). Thus, you can then tie with connecting posts along the front half loops.
- When the size of the circle reaches 26 cm, knit 3 cm without increments.
- Then start decreasing evenly until the diameter is 16 cm.
- Finish knitting a beret with a 2 cm elastic pattern (alternate embossed front and back stitches.
- For finishing, go through the light thread of the connector. pillar. along the front half-loops, starting from the top of the beret.
To create a flower, make a lace with knots of clowns from a photo.
To get a rosette, do the work according to scheme B: from the sliding section of the column. with 1 / n for the back half-loop, add 12 pillars. Finish with 2 half-columns and 2 pillars. b/n. Do not cut the thread, but start knitting along the remaining free ones. anterior half-loops C1H, C2H and C3H. Make two or three in all loops. Next, decorate along the edge with a scar: connect.p. alternate with air.p.
Stylish youth model
Another option in our selection is a stylish women's crochet beret in anthracite shades. The style can be attributed to berets or to fashionable youth.
Prepare:
- Alize Angora Gold yarn (10% wool, 80% acrylic, 10% mohair, 550met / 100g) - 1 skein of gray and anthracite colors;
- hook number 2.
Description of beret for woman crochet:
- With an anthracite thread, dial the chain of voz.p. 60cm and tie 5cm semi-columns behind the back wall.
- In the last river make additions, knitting 2 half-columns from every second p. of the base.
- Next, knit 5 p. Art. from 2/n. Then change the color to gray and knit another 5 p. Art. from 2/n. Repeat these 2 strips one more time and start making gradual reductions.
- When 10 stitches remain, knit them in one go.
- Knit the cage with a chain stitch across the beret stripes.
How to embroider with chain stitch.
Classic for an elegant lady
Very simple and at the same time charming model will decorate the wardrobe of any woman. And the way to do it is simple even for beginner craftswomen.
Size: 54-56 cm.
You will need:
- Splendid yarn from Lana Grossa (72% mohair, 21% nylon, 7% polyester, 167met / 25gr) - 1 skein of beige, gray and gray-beige colors;
- hook No. 3.5 and No. 4.
Main pattern: make a ring of yarn and tie it in a circular row with semi-columns. Replace the first semi-column with two air points, close the row with a connecting column. in the upper air.p. first half-column.
When no other option is advised, perform 1 column s / n in all semi-columns.
Stripe alternation: alternate colors 2 p.
Density: 20 p. - 10 cm.
How to crochet beret for a woman:
- Work begins from the top of the beret. In the 1st r. make 10 semi-columns in a ring. In the 2nd r. double the number of loops. In the 3rd r. knit 2 half-columns in every second stitch (= 30 stitches)
- From 4 to 16 p., increase in the place where there was an addition in the lower p. (= 160p.). 17 p. - without additions.
- From the 18th p. start making adjustments. Do them in the places where the additions were made, knitting 2 half-columns together (= 150p.). Continue in the same rhythm in 19-22 rows.
- Change the tool to No. 3.5 and complete 9 p. for the beret strap. RLS gray-beige.
Considering the topic of crocheting a women's beret, one cannot but ignore. Watch a detailed video lesson from Svetlana Bersanova with a master class of a female crochet beret with lush columns:
Spectacular beret made of thick yarn
And now let's try to figure out how to crochet a beautiful one from the design studio Drops. Additional charm of the model is given by thick yarn.
You will need:
– Eskimo yarn (100% wool, 50met/50gr);
- hook number 8.
Density: 9 p. \u003d 10 cm.
Attention: at the beginning of the river. instead of st.s / n, knit 1 voz.p., together a table. with 2 / n - 3 voz.p., instead of a table. from 3 / n - 4 voz.p. At the end of the river perform 1 connect. half-column Decrease like this: Knit 1 dc without pulling the yarn through the loop. After doing 1dc and pull the thread through all three stitches.
Scheme and description of crocheting a beret:
Make 3 v.p. and close them in a circle. Make 5 double crochets in the first p.
2p.: 2 tbsp. from 2 / n to all loops (= 10p.);
3r.: 4 voz.p. (= 1st.s3 / n) plus 1 voz.p. plus 1 st.s 3 / n in the first table., 5 v.p., * skip 1 table. with 2 / n, 1 table. with 3 / n plus 1 voz.p. plus 1 tbsp. from 3 / n to the next. table., 5 voz.p. * - repeat from * to *, at the end of the river. skip the last st. with 2 / n, 1 connecting half-column in the fourth voz.p.
A beret crocheted with embossed columns is presented in great detail in the MK from Mary:
Volumetric beret for a girl
Volumetric options are gaining more and more popularity, especially among young people. To crochet the following beanie hat, you will need:
— Schachenmayr Original Bravo Mezzo threads (100% polyacrylic, 165met/100gr);
- hook number 7.
Head volume: 56-57 cm.
Drawing for the bar: table b / n, introducing the tool behind the back wall of the loops of the previous river.
Main drawing: (multiply 2)
1r .: 3 voz.p. for lifting, table s / n behind the back wall, complete the connecting table. in the third VP;
2r .: 3 VP, * one unfinished table s2 / n for the front wall of the next. 2 VP, knit these 2 st.s2 / n together, skip 1st.s / n of the first p., Work 1st.s / n in the next. table. s / n of the first river. * - repeat from *, finish 1 connection. in the third VP.
3r.: 3 VP, 1 unfinished st.s2/n in each p. these 2 st.s2 / n knit together, perform 1 st.s / n in the second row knitted together st.s2 / n. * , finish the connection. in the third VP.
Knit for the first time 1 and 2 p.; then only 3 p.
Density: 7 p. \u003d 10 cm.
How to knit a women's voluminous beret:
- Dial 50 VP, close in a circle will connect. pillar. and knit with a pattern for a plank in a height of 4.5 cm (= 7r.).
- Continue knitting the beret with the main pattern, starting from the second p. (total 25 pattern groups).
- When you tie 12 p. beret, start making reductions: skip st.s2 / n, that is, on both sides of the table. s / n previous. R. knit 1 group of st.s2 / n in the next st.s / n, perform 1st.s / n. Decrease stage - 3 p.
Delicate beret with a large flower
For a coquette woman, a classic model of a knitted beret, decorated with a huge flower, is ideal.
Would need:
- yarn Olga (50% wool, 50% acrylic, 400met / 100g) - 1.5 skeins;
- hook number 2.
On the volume of the head: 56 cm.
Beret knitting order:
Work is carried out from the top of the beret. It is necessary to dial a chain of 6 VPs, close it in a circle. Knit 15 dc from it. Then continue in a circle. In every r. add 15 stsn until the diameter is 40 cm. Next, knit 4 p. without increments, then 3 p. STBN, decreasing every 5th st in each. For an elastic band, knit 6-7 p. according to scheme 1.
To make a flower, you need to dial a VP chain 25 cm long and knit 8-9 p. according to scheme 2. Perform the core of the flower as the beginning of the beret (= 6r.). Gather the ribbon and sew the core in the middle.
Want to buy a hat for the warm springtime, but don’t like anything? Then you should pay attention to women's crochet berets. It can be definitely judged that knitted berets are not becoming less popular. Because they are created in a pleasant creative process, and the finished product is inimitable, unique and ideally suited to the chosen image.
Another advantage is that the creation of most models is quite simple, and they look original and stylish. Therefore, it is possible to make a wonderful beret for spring in a short period of time, which will be not only unique, comfortable, but also of high quality.
Easy option
Such a wonderful universal beret will look great on a lady of any age.
Required materials and tools:
- Yarn;
- Hook number four.
The beret, discussed in this master class, is suitable for a woman with a head circumference of 56 to 58 centimeters.
Knitting density: seventeen single crochet, will equal ten centimeters.
Please note that in the last row, instead of the first column without a crochet, you need to knit an air loop, and you need to finish it with one connecting column at the beginning of the row. Instead of the first column with a crochet, we knit three air loops and in the last row in the third air loop we make a connecting column.
The crab step is knitted in the following way: a single crochet column in the opposite direction, that is, from left to right.
Knitting rows from double crochets and arches from air loops. To create it, you need to turn the work with the wrong side towards you, do a double crochet column, then an air loop and skip the air loop behind the air loop of the last row. Rapport: we knit a double crochet column under the next air loop and another air loop. Repeat until the end of the row. Then we make a double crochet column into the last arch from an air loop, then a connecting column into an arch of four air loops at the beginning of the row.
Related article: DIY wall vase
Using the above scheme, we will perform an openwork pattern.
Such a wonderful openwork beret is knitted from top to bottom in circular rows. In the first row we knit four air loops and close them into a ring, using a connecting column in the first air loop. After that, eight columns without a crochet in a ring, remembering the additional air loop, as instructed above.
In the first row we make four air loops and connect them into a circle, using a connecting column in the first air loop. After that, we knit eight columns without a crochet in a circle, remembering to knit an air loop, as advised above.
In the second row, we make a single crochet column into all single crochet columns, knit the entire row in this way, which is equal to sixteen single crochet columns.
In the third row, we knit a rapport: a single crochet into the first single crochet, then two single crochets into the next single crochet, so we work until we reach twenty-four single crochets.
In the fourth row, we knit a rapport: a single crochet in the next two single crochets and two single crochets in the next column. We perform until we reach thirty-two single crochet. Then we knit according to the scheme. Having knitted all the rows according to the scheme, you get thirty-two arches from air loops.
Next, we knit an openwork beret in circular rows, using the following description: In the first row, we knit four columns with a crochet into each arch of air loops, as a result, one hundred and twenty-eight pieces should be obtained.
In the second row, we knit in a double crochet column into all double crochets, at the same time evenly reducing two double crochet columns, at the end we will have one hundred and twenty-six double crochets.