Ced lacing ideas. Original ways of lacing shoes. Unusual lacing - "parallel lines"

Each person in the wardrobe necessarily present at least some shoes on the lacing. Massive shoes, elegant shoes, light sneakers - all this distinguishes the personality from the crowd, gives it their own individual style and some refinement. In this case, you will not need any additional accessories. The main thing is to master the main existing types of lacing.

It will add your shoes a special touch. Forget about the only way to whom we once taught in childhood. Types of lacing are distinguished by their diversity. So try something new, extraditiate and experiment. Be sure: this lesson is no less fascinating than knitting sea nodes.

Types of lacing - why are such different?

So where to start? Types of lacing noticeably affect your walking, running, etc. If you do it wrong, the shoes will be badly kept on the leg or, on the contrary, tighten it. Laces can be constantly untied. Certray with this can be only one way. You need to learn how to use various types of lacing. In short, choose the way that is suitable for you and your shoes. Naturally, the material from which the laces are made are also important. If they are not suitable for you, they simply have to change to others.

Much depends on shoelaces

Thus, it is worth paying your attention to the materials. Beautiful lacing in many respects depends on it. What does it mean? Laces are made from a variety of materials - from natural (jute, cotton or skin) or from synthetic. Of course, nylon accessories are more durable and durable compared to cotton. However, they are unleashed much easier.

They can also be round or flat, may also differ and their length. Best of all, of course, pay attention to the second, made of natural materials. They are unleashing much less often than round synthetic shoelaces.

However, it is not only in the form or in the material. Much depends on your hands. Observe how to cord conversions, sneakers, shoes and other shoes. As a result, you will get a great result.

Before proceeding with the lacing ...

Suppose you have decided on the most suitable option for you. You already know how to cord conversions, sneakers, sneakers, etc. However, before proceeding with the process, you will need to do something else. Before you delay the shoelaces, be sure to fit your foot in the shoe into the so-called "cam". Only after that they can be tightened.

How to solve some possible problems that may arise when lacing? First, you may have the upper part of the foot. This happens at the owners of too high lifting, which are too tightly tightened with shoelaces. The question is solved through the passing of the lacing in the part of the leg that hurts the most.

An unpleasant sensation can be spread over the entire surface of the foot. Either this is too narrow shoes that clicks the leg, or you just tighten the laces very much. In order to solve this problem, loosen the grip or use a parallel lacing.

Another possible trouble - my heels hang out. Accordingly, in your shoes too much free space. Because you need to fix it. For this, the standard lace cross will be carried out, but not to the end. The upper holes remain free. They have a lace and skipped back. It remains a small loop. The same thing is done from the opposite side. The ends of the shoelars are taught in these loops, are dragged and tied. You will make much easier to make your walking.

Classical and extraordinary lacing

What else can be said on this topic? There is a classic and extraordinary lacing. Everyone chooses the style that he is closer or more convenient. Nevertheless, the general rules are universal. That is, a restrained simple lacing will be selected to a rigorous costume. In the informal setting, more unusual weaving is used.

Classic always in fashion

Beautiful lacing should always be present in the image of a person on traditional admission. The first option is a standard cross-method. This method is the most familiar and simple for many people. In this case, the lace must be missed through the bottom holes and is symmetrically removed from both sides. The ends of it crosses and are made from the inside through each next pair of loops. So continues to the upper holes.

If your shoes have an odd number of pairs of holes, use the lacing "over-under". Start from the inside. With something - outside (you can use the same lacing). As a result, it turns out very simple, but at the same time a beautiful and elegant way. This lacing is also suitable if you use shoelaces that are prone to rapid wear. In this case, they will serve much longer.

There is another classic elegant lacing method - straight. The secret is that one end of the lace immediately stretches to the upper hole from the bottom. The second - passes through all the loops. The main thing is how to adapt to ensure that the free part of the shoelains coincided in length.

Originality - an important accent of an extraordinary image

If the situation allows you to appear in society in a more informal and free image, the lacing of the boot or any other shoes can be non-standard. Try creating a modern and fashionable image.

The first option is the lacing "Butterfly". The name she received for the external similarity with a tie. If your shoes have an odd number of pairs of holes, start the lacing through the top. With something - from the inside.

The main advantage of this method of lacing is that it can be arbitrarily delayed and, on the contrary, relax different zones of the foot. It is especially relevant to this method for those people who wear orthopedic correctional insoles.

No less popular option - "Railway". In this case, on the wrong, the shoelaces go straight, forming two external parallel lines. This method is true, just for flat or very thin shoelaces. After all, they pass through each loop twice. Nevertheless, the lacing is obtained very reliable and strong, although it requires certain skills.

And here is another intricate lacing. It is called "zip-zipper". Of course, this option is suitable for especially persefeachable people. However, if you wish to cope with it, it will not be difficult for you. It turns out this lacing very strong. Therefore, it is ideal if you need a robust fixation of your foot. Outwardly, it looks like a large zipper zipper.

For tourists and cyclists

What should be the lacing of sneakers for lovers of outdoor activities? Specific! Perhaps it looks and not very aesthetic, but the lace knot, due to the fact that it is located on the side, allows you to relax peacefully, without thinking about what you care sleep somewhere.

Used in such cases often also store lacing. At the same time, one end of the lace is immediately skipped into the opposite top hole, and the second gradually flashes the entire sneakers or shoes, performing some kind of spiral. By the way, this method can be even modified by skipping one of the ends, but hiding it as in a simple straight lacing.

For military

With athletes figured out. Consider the lacing methods at the military. The most popular - reverse version of the "butterflies". It is called the military, as it is in this way the shoes of the soldiers of the French, Dutch, British and Brazilian armies are stitching. It looks like such a lacing very good, while the shoelaces do not have to be too long.

There is another similar way. Only on the offline shoelaces go straight, not diagonally. In a word, everyone picks up exactly what it is convenient for him.

Quickly and beautiful

Do not forget that the lacing of the shoe (or any other shoes) should look very attractive. In addition, you should not spend too much time on it. Pay attention to the lacing a double spiral. She not only looks very exquisite, but also reduces friction and prolongs life to your shoelaces. For symmetry, you can lace up the right and left shoes in the mirror image.

No less popular option - "Grid". This lace, of course, is quite difficult to tighten. Despite this, she gained enormous popularity due to its decorativeness. You just can simplify your work, initially wearing all the lacing with one end. After that, skip the other end through the grille.

Nodes in unusual places

Sneakers lacing can be particularly non-standard. For example, you can tie the nodes not as everyone is used to see, but in rather unusual places. Suppose you can use any variant of the lacing, leaving the shoes are weaker or stronger than tightened. At the same time, you will leave the node in the middle. With such a lacing leg in the shoe, shove it is not easy, but it fixes it very hard.

And you can also hide the node at all. Straight lacing stitches look much more interesting when the bantle is not visible. Do not doubt!

Color lacing

And what to choose to lovers of glamor? Not only lacing methods are important here. It is worth paying attention to some things. For example, on color. The original and beautiful color lacing today becomes enormous popularity. For this, the laces of different colors are simply used, which allows their owner to look stylish, bright and extravagantly.

Due to double color lacing, you can not just stand out from the crowd. You can even beat the color of the flag of your own country, or a favorite sports team. Four end of the shoelaces, if you wish, you can also make enough creatively tie. Do not forget only that if in your boots, the inventive number of holes, laces will need different lengths.

Decorative lacing

So, if you want to look stylish and beautiful, do not forget that one of the main indicators is your shoes. Pay special attention to the lacing options, and select each of them to a specific event. For example, one of the most interesting decorative options (reverse loop) is suitable for any elegant evening. The only thing that should not be forgotten is that this shoe lacing is not too comfortable. The fact is that the loops have a property, intersect, move from the middle. In addition, friction increases wear of shoelaces.

Do not forget about the addition nodes. At every step of the lacing, they increase its strength and improve the appearance.

Extra popular popularity is becoming a twisted sturdy lacing. It is quite difficult to loosen, but it looks great. It looks best in the interlacing of thick round white shoelaces in combination with dark sneakers or shoes.

For football

So, how to cord beautifully, we figured out. Let's pay attention now to how sport lovers do. Take, for example, football. For this game, you need to create a certain similarity of the bowl of your shoes in order to make it easier to control a fishing and twinned ball. Cutting sneakers before the game, you combine long stitches around the edges, which pull the halves of the shore outward. The top of the lacing is performed at your discretion. Options can be a lot - choose exactly what you are comfortable.

Beautiful lacing - beautiful shoes!

In any case, whatever option you choose, you should look beautiful, bright and stylish. And it is not important if you specialize on how to cord berths, shoes, sneakers ... Most importantly, choose the most convenient option for yourself. You will look very interesting. In addition, you will be quite comfortable.

Each person has already got used to the fact that bought boots, sneakers or shoes are already laced by the manufacturer. Most often, the lacing has the form of a classic way (or in a different "cross on the cross").

Shoe lacing plays an important role and can be done in many different ways..

Each type of lacing helps to diversify the style of shoes.

Suitable shape of lacers

It often happens that shoelaces come into disrepair and need to be changed. And the question always arises: "What cords are suitable for some particular shoes?".

You need to remember a few simple rules:

1. First you need to look at the length. It depends on how many holes are in shoes. For example, if there are three pairs of holes in shoes, it will take sixty centimeters of the rope. The more holes, the longer you need to buy a lace.
2. Certain American stamps indicate the length of the shoelaces in inches. For sports shoes, sellers recommend using a special table, because They require tight lacing.
3. If the laces were long, they can be trimmed. The edges will need to be consolidated so that they do not break. Laces of synthetic origin can be buried, but it is necessary to do it carefully.

The lacing is needed in order to correctly fix shoes on the leg. According to experts, irregular lacing causes diseases that are directly related to the legs.

How beautiful to laugh men's shoes?

Classic way

This variant of the lacing is very often used by manufacturers, because This is a simpler and effective way. Classic way implies lacing "Cross on the cross". The way is popular and widespread and such shoes will not rub the leg.

Sequence of action:

1. We take the ends of the lace and told them into the bottom holes.
2. The next stage - the laces will need to be crushed and tighten well.
3. Then we produce ropes in the next holes, they cross again and are delayed.
4. We repeat all the steps to the very end. As a result, you can tie a node or bow.

How to properly tie a bow on male shoes so that he looks neat and beautiful, tells on the video:

Without a bow

It happens that the hanging parts of the lace interfere and sometimes unleash. Every time the bow is to hide for side "sides", but over time, the shoelaces come out again and interfere.

Large shoes without a bow can be in several ways.

The first option lies in the fact that the holes are skipped in times.

If a person knows the movement of the snake, then this method will seem very easy to him:

• With the wrong end, the left end will be linked through the left hole, and with the front - right.
• When lacing, do not forget to leave one hole free.
• When all the same type of actions are done, the ends can be tied to the node from the wrong side.

The second method is called "Grid". Here are all the same moves, just not need to skip holes. According to the result, the remaining part of the rope is launched inside the shoes, and the ends are tied to the node from the wrong side.

How to lax men's shoes so that the bow is not visible, tells on the video:

With 3 holes

This method lengthens short shoelaces. Outside, they crossed out, and inside vertically stretched.

Instruction:

1. The essence of the method is that the lace is running through the lower holes and the ends remain inside the shoes.
2. Further, you need the same lace to stretch vertically through another pair of holes. It should turn out something like a space.
3. Now the ends are crushed and access the following pairs of holes. It turns out a space.
4. It is necessary to continue until the very end, intersecting and rising up.

With 4 holes

Furge shoes with four holes will not be difficult. Here you can even show a fantasy and come up with something your own, and you can seek help to the Internet.

The most common lacing is called "Diagonal":

1. So, we take the end of the lace and wake it up through any bottom hole.
2. What happens in the end? This very end comes to the opposite hole, and then it is existed on the bottom, parallel to the first hole.
3. Each step is repeated until the holes are terminated.

6 pairs holes

This option will win on male shoes.

reference! At least this method is difficult, it does not cease to enjoy great popularity.

This method is more suitable for shoes with plenty of holes. From the side looks very attractive and convenient.

• Laces are drawn through the bottom holes.
• In the adjacent top holes skip the ends of the lace.
• The next step is that the ends need to be crossed. The left end passes under the right cord into the right hole, and the left over the left cord into the left hole.
• At the end of the lacing, the ends crossed and diverge along different directions. It creates a tight violin.

Linging "Lightning"

It is considered one of the complex laces, because This method is similar to zipper. Most often used for cords of the rollers. There is one major minus - it is delayed very hard.

Step-by-step instruction:

1. We take the lace and produce it through any lower hole, and after it is descended through the side openings.
2. The ends must be tightened behind the knot and then turn again through two other holes.
3. The next action will be that the ends of the ropes are cross and pass under the tie.
4. All actions repeat to the very end.

Method "Chess"

There is another extraordinary way of lacing shoes. It is called "chess".

The process may seem laborious, but in fact there is nothing heavy in it:

1. We take the first lace and weening by direct way.
2. From another lace, wave-like weaving begins below and ends at the very top.
3. Turns through the upper lace and wave down. The lacing continues until the holes are terminated.

The most popular ways of lacing male shoes are shown in the video:

Each person has a variety of different shoes that need to stir. Frequent use of classic skills may be bored and become uninteresting, but the output still exists.

You can cord your shoes in different ways that can only be found on the Internet. There are heavy lacing, and the lungs, and the most original.

Each person can choose more suitable for their shoes.

Most men are accustomed to the fact that their shoes purchased or classic shoes have already been laid by the manufacturer. As a rule, it is an uncomplicated way of cross-on-cross. Meanwhile, there are many ways of lacing that will allow several diversify your male style.

We selected the 6 best shoe lacing ways and drew schemas that would help learn in detail how to tie laces.

6 ways to tie shoelaces

As I mentioned, the most popular way of lacing shoes is a classic cross-on-cross. Its popularity is in the simplicity and simpleness of the intettry of shoelaces. I think this method will still "rule the ball" for a long time. Well, we try to learn something new and learn how beautiful to tie the shoelaces. For example, lack shoes by direct method or cross over-under. Both methods are quite simple and only a bit more complicated by the classic cross-on-cross.

Next, we will learn to tie the shoelaces with a diagonal method. This method allows you to laugh shoes both in the same way and mirrored on both shoes. Do you like minimalism? Then you can lace up the shoes in the opposite method (also called military lacing), where the shoelaces are almost not visible. And the most difficult way to tie a shoelace - grille.

They say shoes make a person. In this case, an interesting lacing - will say a little more about you.

Method 1. Lacing cross-on-cross

Traditional way of lacing shoes Cross-on-Cross knows every child. It is simple, functional and quite universal. If you are a practical person, this is the best choice for you. The method is tested by time and is suitable for any male classic shoes.

How to tie a lace by the cross-on-cross method:

1. The lace is skipped through the lower holes of the shoes on the inside and is displayed outside on both sides. It is important that the shoelaces at this stage are the same length.
2. Take one end of the lace and skip it across the next empty opposite hole.
3. Repeat the operation with the second cord. You should have a crossbone shoelars.
4. Continue this uncomplicated operation to the most upper holes.

Method 2. Diagonal lacing

The diagonal method of lacing male shoes looks fresh and attractive. After both shoes are launched, it turns out a rather interesting diagonal pattern. It can be either the same or mirror-reflected on a pair of shoes.

How to tie a shoelace with a diagonal method:

1. Skip the lace through the bottom holes on one side from the inside, and the other is outside. That party that was from the inside, you will be visible on the boot, and the other is not. It is important that the shoelaces at this stage are the same length.
2. Next, take the end that will be visible and to the next, the opposite side so that the end entered from the outside, and not internal.
3. The second end (which will not be visible) skip through the next opposite hole from the inside. Please note that at this step, that side that was not visible, it will be outside the boot.
4. Continue the operation to the upper holes, alternating the visible and not visible side of the lace.

Method 3. Lacing cross over-under

As can be seen from the name, after lacing the boot, you will get an alternating cross over the berths and under the berries. This method is best looking at shoes with 5 or 6 holes on each side. A rather interesting way of lacing, especially if you have classic oxfords.

How to tie a lace method with a cross-under-under:

The first thing to determine how many crosses you will succeed. If you have up to 4 holes, you will get only one full-fledged cross. If you have 5 or more holes, then it turns out 2 or more crosses over the berths.

If you have 3 holes:

If you have 4 holes:

1. Next, cross the laces and grind into opposite holes on the inside, so that an invisible cross formed.
2. Next, do the same as in the previous step, only this time you will have a visible cross over the berths.
3. The next cross will be invisible, after the lacing of which both ends come out from the inside out.

If you have 5 or more holes:

1. Grind the lace from the inside, so that both ends come out from the inside. It is important that the shoelaces at this stage are the same length.
2. Next, cross the laces and grind into opposite holes on the outside, so that the visible cross formed.
3. Next, do the same as in the previous step, only this time you will have an invisible cross under the berrs.
4. Repeat both previous steps and you should have 2 visible and 2 invisible cross (if 5 holes).

Method 4. Direct lacing

Direct lacing will allow your shoes with parallel lines that look quite unusually on any classic shoe. On the one hand, the laced shoes look "easy", on the other hand it looks attractive. The direct method is interesting with any number of holes for shoelaces. The only inconvenience is the complexity of tightening the shoelaces, especially if the shoes are tightly sits on the leg.

How to tie a shoelace direct method:

1. Grind the lace from the outside, so that both ends are involved. It is important that the shoelaces at this stage are the same length.
2. Take a left lace in your hand and thread from the inside to the next hole on the same side of the row of holes.
3. Take the right lace and thread through 1 hole from the inside out on the same row.
4. Next, take the left lace in the hand and thug down in a strictly parallel hole on the next row.
5. Take the right lace and repeat the same action as in the previous step. You must have 3 parallel lines that are formed by laces.
6. All other holes need to be laced exactly in the said sequence until you reach the last row.

Fashion 5. Reverse or Military Lace

If you like minimalism in all its manifestations, then I can recommend you to lace up shoes with a reverse or military method. The last name, this lace method received due to the practical application of it in the many armies of the European Union countries.

How to tie shoelaces with a reverse or military method:

1. Grind the lace from the outside, so that both ends are involved. It is important that the shoelaces at this stage are the same length.
2. Crossbind both end of the lace and thread from the inside out to the following empty holes. Must get an invisible cross.
3. Next, take the left end and grind into the next hole in the same row in the top.
4. Do this operation with the second end.
5. Next, cross the shoelaces and thread them in the following opposite empty holes to get an invisible cross.
6. Repeat steps 1 and 4.

Continue to cord shoes until you reach the upper holes.

Method 6. Grid

The latter method, which we will consider - the most difficult. Nevertheless, if you have enough patience, you will get a very unusual drawing that many will like it. Please note that the lattice lace is best looking at the shoes with the 6th holes.

How to tie a lace with the lattice method:

If you have 4 holes:

1. Grind the lace from the inside, so that both ends come out from the inside. It is important that the shoelaces at this stage are the same length.
2. The final step will be the foster of both ends from the inside out in the last holes, previously crossing the ends.

If you have 5 holes:

1. Grind the lace from the inside, so that both ends come out from the inside. It is important that the shoelaces at this stage are the same length.
2. Crossbind of both the end of the lace and grind over the top through one empty hole.
3. Next, take one of the shoelaces and grind from the inside skipped on the 2nd step hole and pull out the outside.
4. Repeat step number 3 with the second hole of the lace.
5. Grind the ends outside inside.
6. Take the left end and grind the next hole in the same row from the inside out

At the time of lacing, try to twist the ends in the form of "lattice", according to the principle: once from above, once from the bottom .... Once from above, one below.

1. Grind the lace from the inside, so that both ends come out from the inside. It is important that the shoelaces at this stage are the same length.
2. Cross up both end of the lace and grind on top of them through two empty holes.
3. Take the left end and grind the next hole in the same row from the inside out.
4. Repeat the previous step with the second end.
5. Take the left end and grind on the second (empty) opposite hole, which was missed on the 2nd step.
6. Repeat the previous step with the second end in the mirror reflection.
7. Take the left end and thread into the next hole (third in the bottom of the bottom) in the same row from the inside outward.
8. Repeat the previous step with the second end.
9. Thread both ends from the inside out in the last upper holes.

Traditional, Cross lacing or zigzag lacing

Very comfortable and most common lacing, does not rub the leg.

Procedure:

2. Ends intersect, and then skipped from the inside out through the holes.

3. Actions are repeated to the upper holes.

Benefits: Traditional, simple, comfortable. Failure: Fleet shoes.

Direct lacing in European or lacing ladder

The method that came to us from Europe. A ridiculous look at the very beginning of the lacing is particularly noticeable with a wide gap between the holes, however, such a zigzag method provides the strength and reliability of the lacing.

Procedure:

1. The lace is skipped through the lower holes and is displayed outside from both ends.

2. One end of the lace (yellow) will increase through the top hole of the lacing.

3. The other end of the lace (blue) will increase above through one hole of the lacing.

4. Continue to cord alternately in one and the other end of the lace.

Benefits: Neat appearance, high lacing speed. Failure: Not the most attractive appearance at the very beginning of the lacing.

Lowing hidden assembly

This method allows you to hide the node, giving the accuracy and originality to your boots. Discomfort can be somewhat reduced by tieting the knot from the outside of the foot. This method is suitable only for shoes with an even number of pairs of holes.

Procedure:

1. Shoe shoes by direct lacing method, but the left end (blue) make a little shorter of the right (yellow).

2. Leave the left end (blue) nonsense, and the right end (yellow) is brought to the samoy top.

3. Both End should go inside the boot.

4. Now make both ends on the left inside the boot.

5. Loosen the lacing as needed.

Benefits: Heat, beauty. Disadvantages: The knot tie is not easy, a sense of discomfort due to the node.

Straight or light lacing

Simplified version of direct fashion lacing. This lacing is most suitable for a boot with an even number of pairs of holes (eg 6 pairs \u003d 12 holes).

Procedure:

2. One end of the lace (blue) is stretched along the entire length of the shoe and goes immediately from the upper hole on the left.

3. The other end of the lace (yellow) is stretched into the upper hole, turns on the other side and again rises up inside the shoe.

4. Thus, the lace (yellow) passes through all the remaining openings and goes upstairs.

Advantage: neatness. Disadvantages: End of laces of different lengths, only for shoes with an even number of pairs of holes.

Roman lacing

The lacing in this case is similar to Roman numbers. The lacing technique depends on the number of pairs of holes. For lacing the icons "X" and "I" Fneezing the odd number of passes, so the even number of pairs of holes is necessary to output the ends of the lace outward.

Procedure:

1. The lace (blue) is passed into the left lower hole, it rises vertically (gray) and comes out of the next versal hole.

2. Laces are crossed and inserted into two holes on the right.

3. The bottom end (yellow) rises into two holes up.

4. The left end (yellow), covered in the second pair of holes also rises up and, passing one level, comes out of the fourth pair of holes.

5. Both end crossed and fed to the left side of the lacing.

7. The habit of the very top of the shoelace is binding to the node, forming the last "I".

Benefits: Beautiful, perfect for shoes. Failure: It's hard to delay.

Commodity, single stitching or lacing with a ladder

Mostly used in stores, as such a lacing is very fast and is a easier modification of direct lacing. One end of the lace is immediately skipped into the upper hole, in one way as the second end gradually flashes the entire shoe. To give a symmetrical view, the left and right shoes are moving mirror.

Option 1: Lacing for long diagonal.

1. The lace is passed through the bottom holes and will be covered inside the shoe from both ends.

2. The left (blue) end of the lace is diagonally stretched up and exits through the right upper hole.

Option 2: Lowing in a straight line:

1. The lace is passed through the bottom holes and will be covered inside the shoe from both ends.

2. The left (blue) end of the lace is pulled up and exits through the left upper hole.

3. The right (yellow) end of the lace zigzago-like passes through all the holes starting from below and to the very top.

4. At the end of the lacing, the yellow end stretches up to the remaining opening.

Benefits: Easy, fast, the possibility of using short shoelaces. Failure: End of cords of different lengths.

Lacing a staircase

This attractive lacing, similar to the ladder, is convenient for shortening the lace long end. Parade and ceremonial soldiers of the United States use white lacing with a ladder. In addition to attractiveness on shoes and sneakers, this lacing looks particularly effectively in high shoes with a large number of lacing holes, especially with bright shoelaces.

Procedure:

1. The lace is skipped through the lower holes and is displayed outside from both ends.

2. Then the ends of the lace rise into the following upper holes.

3. The ends crosses and are tested under the vertical lace of the opposite end of the lace and then rise into the next top hole.

4. At the very top, the ends again crossed, pass under vertical lacing and are bred in different directions. It not only climbs them into a general view of the lacing, but also creates a tight violin, which still tightens the lacing.

Benefits: Beautiful, original, the ability to shorten long shoelaces. Failure:it's hard to delay.

Double reverse lacing

Although this lacing is very difficult to delay, this method looks very advantageous, firmly tightens the boots, and is also used to shorten the long shoelaces. There are two options for this lacing: for short and long shoelaces. This is the most beautiful method, because it does not have a lace reserved at the bottom of the shoe. It also means that the lace is not so shorted as in the following method.

Procedure:

1. The lace is passed through the second pair of holes from above and goes inside the shoe.

2. Then the ends are crossed out and ran out outside inside the fourth pair of holes on top of the boot.

3. The lacing of both ends continues simultaneously.

4. At the bottom of the ends of the lace stretch inside the shoe vertically in the second pair of lacing holes from the bottom.

5. Ends again crossed out and now, walking in the remaining openings, shoe up the up.

Benefits: The shoe thoroughly holds on the leg, the ability to reduce the length of the shoelaces. Failure:not very comfortable.

Burning double spiral

This method was invented for quick lacing. The lacing is carried out spiralide inside and outside the shoe. The left and right shoes can be laced mirrored, for a symmetrical view. With such a lacing, friction in the holes, as well as between the parts of the lace, decreases, which makes the tighten and weakening the lacing is easier. And the ability to delay the lacing immediately with the lace immediately makes the cords of the shoelaces even faster.

Procedure:

1. Beginning from below, Levtyz (blue) lace comes out of the left hole, and the right (yellow) string enters the right hole.

2. The left (blue) end is fed into the next right hole, and the right (yellow) comes out of the left hole above.

3. The lacing process occurs spirals to the highest.

Benefits:reduced lace wear, quickly, easy, beautiful.

Journal lacing

The added node on each screed increases strength and improves the view. Ideal for lacing ski boots, rollers, etc. With each shuster, the lacing is created an additional node, which leads to very strong tying. This is the main advantage of this lacing, since unwanted arbitrary weakening is reduced to minima. Ideal for lacing rollers, skates, etc.

Procedure:

1. The lace is dyed into the lower holes and comes outwardly by both ends.

2. The ends intersect with each other and is tied one-time on each screed, according to the method of the starting node.

3. The ends are bred in different directions, enter the hole and come out in front.

3. The procedure continues to the very top of the boot.

Benefits:strength and additional tightening. Failure:it's hard to loosen.

Two-color lacing, color variant (fashionable) lacing

The lacing method is two multicolored laces. Easy discomfort from the knot of ligaments can be excluded, by placing the lace near the mother's legs.

Procedure:

1. Take two multicolored lace, each little longer than standard length.

2. Cut them but not in half, about 2-3 cm. From the middle.

3. Tightly tie a short piece of one color lace (yellow in the figure) to the long end (blue in the figure). For superpower, add glue. Use the remaining segments to create a lace for another shoe.

4. Skip the long (blue) end to the right hole and pull it up to the node with another end (yellow).

5. And now lace up the remaining boot on the method of direct (fashionable) lacing.

Advantage: nice. Disadvantages: Mainly cost, the appearance of a feeling of discomfort is possible.

Another lacing method with two laces, whose ends can be tied in a large bow. If you have boots with an even number of pairs of holes, one lace will pass through a larger number of rejects than the other. Therefore, the laces should be of different lengths.

Procedure:

1. Start the lacing with two shortened multicolored laces.

2. Skip the first (blue) lace through the bottom holes and output it out.

3. Make a crossroads to jerk the lace into the holes through one pair above.

4. Continue the crossed lacing every time we pass a pair of holes.

5. Take another lace (yellow) and start the lacing from the second pair of holes, repeating steps 2 and 4 while the end of the lace does not coincide with the first.

Benefits: Beautiful, there is a big bow. Failure: Two sets of shoelaces are required.

Lacing double cross

This lace method is more suitable for shoes with an even number of holes. If you have a boot with an odd number of couples, you reach the end of the lacing without skipping the second (last) pair of holes, the snow below another angle. You can lock the shoe and so that the bow is located below. If the laces are woolen, then they are then damn it difficult to loosen. Such laces are better used on low boots.

Procedure:

1. The lace is skipped through the bottom holes inside the shoe.

2. We skip two pairs of holes, cross the ends and insert into the fourth pair of holes.

3. Restart the ends again and insert them into the third pair of holes.

4. Continue the lacing, crossing the laces each time and inserting holes into the third pair, then finally cross them and output.

Advantage: nice. Failure: It is difficult to delay, especially woolen shoelaces.

Lacing reverse loop

Each part is intertwined with another end in the middle. However, it is possible to displace from the center. The reverse loop lace looks better with round laces, especially bright on dark shoes, which emphasizes their interlacing.

Procedure:

1. The lace stretches through the bottom holes and leaves both holes on the sides.

2. The left end of the lace (blue) spiralide rises up, producing from under the hole with screeds.

3. The right end (yellow) also spiral rises on the right side of the shoe, passing into the blue-end loop.

Advantage: nice. Disadvantages: Intensive wear, shifts center.

Lacing one hand

There are many disposable lacing, but at the same time the method does not even necessarily tie the node. At the top, the lacing is more dense, and the bottom is completely free. However, the node and frequent lacing will not allow the boot to be completely stretched down (it is best to use with small holes and thick laces). The lacing suspension is carried out from above. For additional reliability, a free end can be tied by a regular knot around some medium tie. Weave the lacing begin to bottom.

Procedure:

1. Take a slightly shortened lace and make a node at one end.

2. Insert a free end into the lacing hole and pull until the node is fixed.

3. Watch the boot to the top of the Zigzag as in the store lacing.

4. Free (blue) End You can simply leave in the middle of the screed lacing. Now it is impossible to come on it.

Benefits: Ability to tie and unleash one hand, simplicity. Failure: Unreliable fixation.

Options of Upper Crosshair

It is very important to correctly cross the upper ends of the lace to prevent spontaneous unleashing. This is the most famous fixation method for any type of lacing, however, the step lacing already contains vertical shoelaces that can be used for additional tightening.

Procedure:

1. Bottnok finishes staging when the last free pair of holes.

2. The ends of the lace rise up and served in them.

3. Ends crossed, and then they are in the resulting vertical screeds on the opposite side.

Benefits: It is tightened firmly, do not unleash. Failure: It's hard to tighten.

Using, it would seem, unambiguous parts can be created competent accents in the image. If a man is responsible for its appearance and the state of shoes, for sure, it will be wondering how beautiful to tie the laces on the classic, sports and seasonal shoes. And stylists offer in turn a few interesting ideas, how can you cord shoes, sneakers or sneakers.

For many modern men, the factory version of the laces of the butterfly laces has already become something boring and ordinary. Another thing is new and creative options, thanks to which you can distinguish with exquisite taste and originality. This is especially relevant. This question is now when men have multicolored laces from all sorts of fabrics that are selected for general style and image.

How beautifully tie the laces, depending on the shoes

When choosing techniques and technician weaving laces on shoes, stylists advise paying attention to such an indicator as the style of the shoes itself and the general image of a man. For example, under sports shoes are those appliances that will look ridiculous and inappropriate on classic shoes. Yes, and for demi-season and winter boots, experts picked separate techniques.

On boots

The first shoes worth considering in the context of weaving shoelaces are shoes. When choosing a lacing version, a man must be taken into account first of all the overall style and design of shoes, if the boots closer to the classic, it is worth choosing more traditional techniques, creative and bold lacing are allowed for shoes.

Most often stylists advise for shoes to try multiple lacing options:

1. Diagonal - In this way, you can draw a lacing so that the laces are not untied throughout the day. An additional bonus will be the original diagonal pattern, which is obtained from the lace. Stylists advise on strict shoes to weave the same lace, on everyday and sports - make a mirror reflection of weaves.
2. Traditional way - In this case, it is assumed to lace the shoes with a zigzag, starting with the lower holes, crossing the ends of the lace, ending with the process to the last holes.
3. Straight lacing - It looks very strictly and presentable on winter boots as classic and free style. Its peculiarity lies in hidden lacing, after which only straight lines from the lace remain over the shoes.

If shoes are assumed to be boots, experts advise the use of round laces that are worn to friction, and therefore will serve much longer. In order for hinges and laces to keep firmly without running, it is better to use a simple cross-lacing. In this case, the edge of the lace is drawn to the lower loop of the shoes, after which they are distributed into two equal stripes. Next, the edges cross, hardened in the following loops above and so to the top.

On shoes

It is especially careful to pick up the ways to tie the laces to classic shoes, as in most cases this shoes requires a consistency of the dress code. In addition, there are more than more than the number of holes on the shoes than on other types of male shoes. Stylists advise to consider a few simple ways, how can you tie with shoelaces on shoes, namely:

1. CRISS-Cross. - The traditional technique of weaving shoelains cross will increase on classic shoes, but also allowed on other types of shoes.
2. Diagonal - Diagonal weaving laces on shoes, involving the traditional weave of shoelaces, but in a diagonal direction.
3. Over-Under - Technique Cross over-under, as a result of which the lacing alternates over or inside the berkens of shoes, which is appropriate on Oxford shoes, for example.
4. Straight Bar. - A direct method of weaving laces, thanks to which the lace lines are created parallel. The shoes look easily and attractive at the same time, but on tightly sitting shoes may have difficulty tightening with shoelaces.
5. Vice Versa. - Maximal lacing (second name "Military lacing"), in the course of this technology, an option of direct, diagonal and rectangular weaving is used.
6. Lattice. - Weaving lace according to the lattice technique, with the result that simple laces will look cool and original. And to learn how to tie the shoelaces along this technique, you need to have shoes with 6 holes.

To look stylish and original, a man is enough to practice with the above variants of the shoe lacing. Particular attention should be paid to the color and texture of the shoelaces so that these criteria fit into the general image of a man.

On sneakers and kids

It is not always appropriate for the decision to tie the laces a bow in the event that a man prefers sports shoes. Therefore, it is necessary to separately consider the advice of specialists how you can tie the shoelaces on sneakers and dies to look fashionable and original. For such a style of shoes, several variants of the lacing are suitable:

• Zigzag lacing - Laces are fought in the lower holes, cross the edges, spending them to the next pair of holes above.
• Lestenka - First, the cords are pulled out to the outside, then one edge will turn into the upper hole, and the second edge is carried out on one hole above. According to this principle, an alternate lacing continues.
• Outdoor lacing - From the inside, the lace is crossed out, passed through two holes, both edges are outwardly and again crossed, after which they go inside and repeated the entire principle of weaving.
• Straight lacing - One edge is carried out from the inside of the upper hole, stretching on the opposite side. Next, they skip one hole, conducting the edge of the lace above from it, and the second end is carried out according to the same principle through the missed holes.

Opinion expert

Helen Goldman

Male imijameker stylist

If the shoelaces on shoes need to be placed according to the dress code and formal style, then in the case of sneakers, a man is free to choose absolutely any variant of the lacing. To date, mathematics offer more than 4 million ways, how to tie laces.

How to tie a shoelace so as not to be untied?

1. Laces are tied around the perimeter of the shoe with the usual way.
2. Next, on the end they make a node, wrapping each other.
3. On the right shoelace you need to form a loop that will look in the direction of left.
4. Now inside this loop stretch the second edge of the lace, form another loop so that its end is also sent to the left. This will make it possible to make parallel two loops.
5. At the end of these two loops, a strong knot is tightened, stretching the edges of the shoelaces in different directions.

According to this principle, it turns out a rather dense and clearly fixed knot, which simply does not unleash it in itself.

How to quickly tie shoelaces?

Another skill that is relevant now - the ability to quickly tie the laces to save time and effort. To get a quick node, a man needs to perform the following manipulations:

• laces are launched by the usual method, tighten the length and girth;
• laces are put on the palm of the palm, so that both ends look in opposite sides;
• after that, unnamed, middle fingers and maizins, two loops should be issued, after which the lace is located on top of the large and index fingers;
• the loops are superimposed on each other, make the turn like the sea node;
• after that, the loops with the right and left side are delayed in opposite to themselves.

Do you know how you quickly lace boots?

YesNot

The lace butterfly is not always appropriate, especially if it is long laces that form an overlooking a large node. In this case, experts advise the edges of the shoelaces to fill in the holes of the shoes in the mirror reflection, after which it is to stretch them along the entire length of the lacing from the inside.

Output

Shoe lacing is both a simple, and complex process, it all depends on the choice of shoes, shoelaces and weaving options. Thanks to the development of specialists, about 4 million techniques are practiced today, each of which is suitable for a certain image, shoe style and a common image of a man.