DIY newspaper clothes for beginners. How to sew a dress from almost nothing? Origami paper products

Using a paper dress, you can stylishly decorate a postcard for March 8, or use it to decorate a festive table, for example, at a bachelorette party. To create such a decor, it is better to take soft and thin colored paper, because thick paper will be much more difficult to bend, folding in several layers. In addition, it is desirable that the paper you have chosen is one-sided, that is, it has only one colored side - so it will be more difficult to confuse them during work.

What materials, besides colored paper, are suitable for creating a dress?

Wrapping paper will also be good, especially if it is of any bright and unusual colors. If you will be decorating a postcard or a festive table with a dress, think in advance about combining colors and patterns, and then stock up on material for the production of paper dresses.

Step-by-step instructions for creating a paper dress

First you need to fold a square sheet of paper into 4 layers, and then unfold it. This will give you the folds. After that, fold the paper square on both sides and turn it over with the back side. The workpiece thus obtained will need to be folded again to form a narrow strip, the edges of which will then need to be opened. So, we see the wrong side of the future dress. Next, bend about 1.5 centimeters from above, and then bend back the wrapped corners. So the contours of the future dress are already beginning to emerge. The edges that have been wrapped should now be expanded, after which the blank is turned over and the hem of the dress is revealed. Bend the fold in half, then smooth it and straighten it again.

Further, without exaggeration, the "jewelry" work begins. It is necessary to bend the "waist" beautifully and very carefully, but at the same time, make sure that the folds on both sides remain even, and are also the same. Then, the blank should be turned over, since the dress is already ready. It can be glued onto thick cardboard, then you will have an excellent postcard.

Unusual, homemade dresses, made with your own hands not from fabric, but from paper, more precisely, from newspapers, are perfect for the role of a Halloween costume or for a party, the theme of which is related to environmental protection. For such an outfit, you will need several old newspapers, a belt and thin Velcro, as well as sewing supplies. To make the pattern correctly, you will need a long ruler and pencil.

Step-by-step instructions for creating a dress

Unfold all the newspapers completely, and then fold them in 2 pieces. Do pleating on each pair of newspaper. It is necessary to fold the newspaper along its entire length, retreating from the edges by 1.5 centimeters. Then you should turn it over to make a fold about 2.5 centimeters wide. Turn it over again, making a fold so that its fold passes just in the middle of the previous fold, being right next to the first fold. The entire paper structure must be turned over and a fold made on it after 2.5 centimeters.

Advice

The seam needs to touch the previous fold. Then you smooth everything down thoroughly. Continue doing this until the very end of the newspaper. Pleating is done on 4 newspapers.

Then mark the future waistline on the leaves. And so that your pleating does not diverge, sew it along this line on a typewriter. Take a couple of blanks and put them on top of each other by 1 centimeter, cutting together. Attach the remaining pair on the sides, slightly lowering it down. You will need to release 7-10 centimeters, no more. Trying on the resulting blank, putting on a belt, on the line.

Output:

To make a small, decorative dress out of paper, or to create a full-fledged, creative attire from newspapers, you need accuracy and a certain perseverance. But, in the very process of creating a dress, there is nothing complicated, so the technique can be mastered literally the first time.

Origami - how to make a dress out of paper

Newspaper dresses

Paper dresses

You've noticed a long time ago that you love to create something extraordinary, special and does not fit into the limits of the general imagination. The flight of your fantasies has no boundaries, and you always strive to amaze. Then you are a creative person who is not afraid to step on unbeaten paths. A newspaper dress is another creative idea that you can easily bring to life. This outfit is extraordinary, but if you do it right, you can wear it on a carnival night, or participate with a model in a real fashion show.

If you are thinking about how to make a dress out of a newspaper, then first of all remember if you already know how to make origami. These fabulously beautiful figurines can serve as a wonderful decorative element for a newspaper dress. The spirit of beauty and flight is in every such dress, the main thing is to connect your imagination and a bright zest will certainly appear in it.

How to make dresses from newspapers - instructions

• Greek style newspaper dress

To create such a dress, you need a simple fabric. Place the fabric over the mannequin, exposing only one shoulder. Take a large piece of newspaper and fold it so that it can completely cover the fabric slung over your shoulder. Dampen the newspaper with PVA glue and stick it on the fabric in the shoulder area. Press the newspaper well against the fabric so that it completely disguises it. Thus, the fabric will become the basis, and the newspaper will become a decorative element.

Next, just cover the fabric with newspaper. This is very easy to do. First of all, it is imperative that the newspapers are well moistened and saturated with glue and firmly attached to the fabric. This technique is also called de-blend. When you're done, trim off the excess newspaper sections. The dress will only be ready when the glue is completely dry.

• Moulin Rouge Newspaper Dress

It will not be difficult to make such a dress, but patience is required. The first step is to create a corset. Best of all, if you use newspapers with color illustrations, then the dress itself will look brighter and more spectacular. In order to create the base of the corset, fold the strips from the newspaper. Between each other, simply combine dense strips of newspaper with a stippler and everything will adhere well to the mannequin.

It is best to make a simple classic corset with a large cutout on the back, then it will be easy to remove it from the mannequin and put it on the woman. Only after the corset is completely ready. You can start making a skirt. Take a piece of newspaper and fan it. All of us in childhood made a fan out of the newspaper, so repeat this simple manipulation. After that, make a second such ver and creak with the first with the help of a styler.

Repeat these steps until you have completed the first tier of the Moulin Rouge style skirt. When you start making the second tier, remember that it should only cover the back of the skirt, while opening the legs in front. So, tier by tier, make a skirt, the hem of which will be short in front, and on the back, on the contrary, long. If you want to decorate such a dress in an original way, you can make roses out of red colored paper and put them on a skirt and corset. Such jewelry will fit well into the overall style of the dress.

The choice of style and material from which your costume will be made. Recently, you can often see various fashion shows featuring clothes made in unconventional techniques. Suits made from garbage bags, flower wrappers, flowers themselves, newspapers are not very rare in our time.

You can find out how to make a suit from newspapers by looking on the Internet, or you can build something yourself, guided solely by your imagination and having elementary sewing skills learned at school. There are some simple tips on how to make a suit from newspapers, thanks to which your suit, despite its seeming fragility, will last a long time.

So, by sticking newspaper sheets on stronger paper, fabric base or cardboard, you can be sure that the suit will not tear. If you want the newspaper "fabric" to remain thin, it can be laminated with tape. It is best to connect the parts of the suit using the same tape or stapler. The outfit will look more impressive if it includes fabric elements in the form of ribbons, braids, buttons and more.

Create a costume. Draw a pattern of the future product on paper. Cut it along the contour, if required by the design of the suit, leave allowances when cutting on the seams. Transfer the pattern to the newspapers that were previously glued together into a kind of canvas. You can trace the pattern with bright pencils or felt-tip pens, since the lines will not be noticeable in the future.

Cut out the pattern and glue it to a sturdier fabric or paper backing. For this procedure, you will need glue, if the suit is large, it is best to use PVA glue, as it is inexpensive. Connect all the patterns into a single whole, the joints can be fastened neatly with tape, zipper or Velcro can be glued.

Decorate the resulting costume using decorative elements. This is where you truly have the opportunity to roam your fantasy. To decorate a suit from newspapers, you can use old belts, dress collars, cuffs, belts. A suit decorated with artificial or natural fur will look effective. Chiffon and organza are also applicable in this case.

The main thing is that all decor details are firmly attached to the main product. You can include items of clothing made of metal - springs, nails, bolts and nuts. Costumes made in unconventional technique using DVD discs look just as impressive. Whatever you come up with, you should know that products made with a soul will keep the warmth of your hands. Your costume is ready!

Paper has gained widespread use not only in the field of printing and writing. Many fashion designers use the material as a basis for creating original and striking outfits. For example, you can create a unique and stylish dress for a girl or a toy that is suitable for a craft contest, costume show, or holiday.

The doll is the main companion of the little girl. Young ladies love to play with dolls, equip houses for them and make outfits on their own. To develop creative skills in a child, you can make items of her wardrobe using paper. The process of creating a mini version can be considered a trial one, as it will help you to conduct a small but thorough training in your design skills.

We will tell you how you can make different types of paper dresses with your own hands.

Materials (edit)

For work you will need:

• doll;
• cardboard (any shade);
• colored paper (you can choose several tones);
• scissors;
• glue;
• wire;
• accessories for decoration (rhinestones, beads, etc.).

Manufacturing instruction

The first step is to make the base for the future skirt. To do this, we use cardboard from which we roll up the cap. We fasten the edges of the cap with tape or glue so that the material does not disperse. Cut off the sharp end with scissors.

Important! Make sure that the radius of the resulting circle fits the size of the doll. The toy should pass freely into the skirt, but the product itself should be tightly fixed on the body.

Skirt

Let's move on to the design of the skirt. Cut out material from paper that is suitable in size for the base. The top can be decorated with peculiar waves, which are typical for a sun-cut skirt.... To do this, carefully fold the paper in the belt area. Small and bright folds are obtained. A strip of lace, which is attached with glue, is suitable for decorating the bottom. We also process the edges with glue to fix the product.

reference: When working, you can use corrugated paper.

Observing accuracy, we put on the resulting skirt on a pre-prepared cone. Carefully glue the belt area to the cardboard base. The skirt is ready.

Top

With the top, the process is somewhat simpler. We cut out a suitable piece of paper for the workpiece. We try on the doll, glue the edges, cut off the excess. It is recommended to emphasize the waist area with a belt. The strap will act not only as a decorative element, but also as an additional fixator.

Cut out a small belt from the satin ribbon. We form it at the waist, fasten the edges with glue. The bottom row of the bodice should be slightly folded and straightened. This will help create an imitation of a peplum, a popular element of evening wear.

Decor

The final point is the decoration. Here flowers made using the origami method are suitable... They can be positioned over the surface of the skirt.

Rhinestones or gemstones made of glass of different shades and sizes are suitable as a substitute for flowers.... The belt at the waist will also be decorated with rhinestones.

Corrugated paper dress for girls

The option of making a complete outfit for girls can be used in many situations. These can be contests for original crafts, unusual costumed performances for various holidays, or themed family photos. Creating a complete outfit for a child is a rather painstaking and complicated process. However, the result pleases with its creativity and uniqueness.

Materials (edit)

Make sure you have the following materials on hand:

• corrugated paper;
• scissors;
• glue;
• fabric (necessary for sewing the base);
• cardboard;
• safety pins;
• sewing meter;
• sewing machine;
• materials for decoration.

The foundation

The fabric lining acts as a base. A paper outfit will be attached to it. We take the necessary measurements from the child. This will require the width of the shoulders, the circumference of the arms, waist, chest and hips, the length of the product itself. We mark the patterns on the cardboard, cut them out. We transfer the blanks to the fabric. Before sewing, it is recommended to fasten the edges with safety pins and try them on in order to take into account and correct possible errors. After trying on, we sew all the details on a sewing machine, forming the required model.

Attention: When cutting, do not forget about the seam allowances.

Top and skirt

Cut out the petals from paper. Depending on the volume and length of the skirt, a different amount of material will be required.... The elements of the future dress are attached to the fabric base with a suitable glue or stapler. We make the top and sleeves in the same way. When decorating, you can use paper of different shades.... This will make the finished outfit brighter.

If the dress has a floor-length skirt, the bottom should be folded slightly to form a wave. The petals themselves can be stretched a little. This will help give the materials a curved shape.

In conclusion, we decorate to our taste. It can be a satin ribbon on a belt, flowers folded using origami technique and located on a top or skirt. The back of the belt will be decorated with a fluffy bow made of paper. This bow can be supplemented with a satin ribbon.

Outfit for a girl from newspapers

Newspapers can be found in every home. Excess waste paper is usually thrown away or handed over. This is optional. The material can be useful for creating an original outfit. A dress, the skirt of which consists of cone-shaped horns, will help to stand out among the other guys.

Instruments

To work, you need a minimum set of tools:

• the cloth;
• newspapers;
• scissors;
• glue;
• stapler;
• threads;
• needle.

The fabric is required for the base of the suit. When working, you can be guided by the above method.

The first step will be to design the top. To do this, we wrap the top with a newspaper, try it on. We carefully sew the paper edition to the base. Newspaper paper is quite fragile, so be careful when sewing and do not over-tighten the stitching.

Advice: The newspaper top can be folded in a tight accordion, and then slightly straightened. This will help create a curvy top.

In order to make the horns, the working material should be wrapped and shaped like a cone. We fasten the edges with a staple bracket. Such a horn is attached to the lining with a corner, using glue. Here you can get creative by making a few layers for splendor. You will get an unusual tutu skirt.

Useful Tips

Additional recommendations will help in conducting a successful work process and obtaining a high-quality result.

• Newspaper blanks are attached not only with glue. For this, special Velcro or strong double-sided tape are suitable.
• As a material for a paper outfit, you can use the remnants of wallpaper.
• To get the result quickly and easily, the option with an accordion-folded newspaper is suitable.... To do this, identical segments are marked on paper, the newspaper itself is folded like an accordion along the marked marks. We glue the edges, form the waist area. Use a belt strap as a retainer.
• When making a newspaper item, you can add pages from magazines. This will add brightness, color and creativity to the dress.
• When working with a doll, the toy can be equipped with an additional support for stability. To do this, glue the plastic cover to the base using several layers of adhesive tape. Make sure that the radii of the base and the cover match.
• Small dresses, folded using the origami technique, are used as decoration for a notebook or notebook, bookmarks in a book.

Paper is one of the most demanded materials. Many fashion designers have not ignored such a find and use it when creating stylish outfits. Using needlework skills, you can create such a dress yourself. It is suitable for a costume show or competition, and will also help a child achieve the coveted victory.

For some, this may be strange, but for most people, especially young people, modern fashion is a huge opportunity for self-expression and the manifestation of imagination, because clothes have long ceased to be made exclusively from fabric. In this article we will show you how to make a dress from newspapers. This is a great idea, as you can wear this outfit on many holidays: Halloween, New Years, and also an event dedicated to environmental protection.

Method one

To begin with, make sure that all the necessary items are at hand. Among them:

• Newspaper sheets.
• Scissors.
• Measuring instruments - a measuring tape and a regular ruler.
• Needle.
• Threads.
• Belt.
• A simple pencil.

Instructions:

1. Unfold a double sheet of newspaper and place another one on top.
2. Fold them like an accordion. The folds should be flush with each other.
3. In this way, you need to fold four "accordions".
4. On each mark the “waist” line, and then sew in pairs on a sewing machine. So you should end up with something like a top. Put the belt around your waist.
5. Cut the top of the top in a semicircle and sew on the straps, also made of newspaper accordion, but do not unfold them.
6. Now let's move on to creating the skirt. To do this, you need to sew single sheets on a typewriter, making folds "by eye".
7. Sew a peplum on top. It is quite simple to make it - for this you need to cut single sheets in half horizontally, fold in an accordion and unfold. Sew the peplum to the skirt.

Your do-it-yourself newspaper clothes are ready! Feel free to put it on and go to the party - you will be the queen of the evening.

Important! Remember that in such a dress you need to be super neat and prudent, because it is easy to ruin it - you just need to wrinkle it or get it wet.

Method two

In the second method, only the bottom of the dress will be from the newspapers. The steps to create it are quite simple, but it will take a considerable amount of time, so be sure to be patient. Rest assured the result is worth it.

You will need:

• Black top.
• Solid black skirt made of simple material without decorative elements.
• Old newspapers.
• Scissors.
• Threads.
• Needle.
• Stapler.

DIY newspaper dress - how to make? In stages, the master class will look like this:

1. First you need to make a foundation. It is good if you already have a single-color floor-length dress without decorative elements. If there is none, just sew the top (blouse, T-shirt or top) and skirt together.
2. Now for the most interesting, but painstaking part. Take a double sheet of newspaper and fold it into a bag.
3. You need to make several hundred of such bags and sew them to the skirt vertically with an overlap.

Do-it-yourself newspaper skirt and top are ready!

Important! You can add a belt, also made from an old newspaper. To do this, fold two double sheets with an accordion and connect them together with a stapler to make a rectangular belt, sew it to the waist.

Method three

You will need:

• Newspaper sheets.
• Scissors.
• Scotch.
• Glue.
• The dress.
• Salt.
• Stapler.

How to proceed:

1. To get started, cut twelve centimeters wide strips from the newspaper and fold them horizontally four times.
2. Form a V-neckline on the dress from such stripes. To do this, sew them to your shoulders and bend them at an angle of forty-five degrees towards your chest.
3. Now let's start creating the corset. First, prepare a solution by mixing PVA glue, salt and water. Cut long strips from newspaper, spread with solution and glue around the body, without touching the neck and part of the back.
4. Let the top dry for 24 hours at room temperature, then make holes on the sides and thread the corset laces through them.
5. Then continue to glue the strips in the shape of the dress. To create a more voluminous outfit, you can create two layers.
6. If you have such an opportunity, ask a friend for help, because a newspaper is a delicate material that is difficult to work with.

Important! You can immediately put on the dress, or you can create decor. Satin ribbons will look great.

How to sew a paper dress for a girl?

If you have a daughter, then you will probably have to face the problem of what to wear for the holidays and events that are organized at school and kindergartens. Of course, you can buy a regular ball gown, but if you want to stand out or simply don’t have enough funds, we suggest you create an outfit from newspapers.

You need:

• A4 sheets.
• Scissors.
• Needle with thread.
• Ruler.
• A simple pencil.
• Stapler

How to proceed:

1. Bend the edges of the sheet towards the center.
2. The upper part must be cut in a semicircle.
3. Connect the folds to the middle and fasten the middle.
4. You need to make about seventy to one hundred such blanks.
5. Sew them to the bottom of the dress.
6. Then sew a satin ribbon to the waist and continue to frame the top.