Encyclopedia 

Knitted knee-highs for girls. Knitted socks and knee-highs

Do you know how to handle knitting needles and think that your skill level can be attributed to professional? We propose to check how skillful a craftswoman you are, and today you have the opportunity to make knitted knee-highs that will not leave anyone indifferent.

We knit knee-highs

For real craftswomen, knitting golf is considered not only exciting, but also useful.

Moreover, this wardrobe item is indispensable not only in the cold winter time. Long knitted knee-highs are no less popular in the spring season.


So, you still have time to acquire a wonderful new thing and with its help make your image unforgettable and complete.
Finished product size:
38

Materials (edit)

Knitting golf is carried out with a thread consisting of 100% cotton. Ideally, if you buy yarn, 200 grams of which contains 660 meters of thread. This yarn will require approximately 150 grams. In addition, you should stock up on stocking needles # 2. Density: Before starting knitting golf, be sure to knit a small pattern. This will give you the opportunity to make correct and accurate calculations of your future finished product and not be mistaken with the dimensions. In 10 centimeters of the sample, which is performed with an openwork pattern, you should fit 28 loops.

Patterns worth mastering

1. Openwork drawing: follow the scheme that was given at the very beginning of the article. It is very important to pay attention to the fact that in the very center of each product you will need to perform subtractions and additions. This is done in all rows except the 7th.

2. Circular elastic: throughout each row we knit with knitting needles alternately 2 front and 2 purl loops.

Subsequence

Cast on 86 stitches. Carefully distribute all obtained loops between 4 stocking needles. You will have 21 stitches on each knitting needle. Please note that the change between p. occurs between the first and last knitting needles. We knit the first 4 cm with a circular elastic band. In the process of working on the first row, you will need to add 2 more loops to the first knitting needle. Further work will take place on 86 stitches. If you want, you can make any length of the elastic. It is worth noting that the more rows in the elastic, the better the knee-highs will keep on their feet.

Openwork drawing

After that, proceed to the execution of an openwork pattern. The first section of the circuit (AB) must be knitted 3 times. That is, with this pattern you will have 30 loops connected. Perform the next segment of the circuit (BC) 1 time, and then repeat the very first segment of the circuit 3 more times. Further work is carried out similarly to this description. Only, as you have already noticed in the diagram, on the first segment you need to connect rows from 1st to 14th, and in the central figure they are performed from 1st to seventh rows. Tie the next 15 centimeters with a straight cloth. And at the moment when the height of the base of the golf reaches this figure, proceed to subtractions. First, on both sides of the central pattern, you will need to remove 1 loop in the place where you knitted the 4 purl. After, tie another 7 p. straight, and then repeat the same cuts in the same rows of the pattern. After all the contractions, you will get 2 purl p. In the next 7 p. you will also need to subtract from both sides of the central openwork strip in the place where you had 3 purl, 1 more loop. Make similar reductions again through the next 7 p. Finally, on the first and last knitting needles, cut three more spaces in the same way. After completing all the decreases, 64 loops should remain in your work. These rows are again made with a straight canvas in an openwork pattern until the length of the golf reaches 38 centimeters. If desired, the length of the golf course can be changed to the size you need. After that, all the loops of the work will need to be evenly distributed between all the stocking needles (16 loops for each knitting needle). Please note that your central drawing should be located in the very center of the front half.

We knit heels

Now move on to doing the heel. To do this, continue to knit all stitches on the first and fourth knitting needles with an openwork pattern. And put the loops on the other two knitting needles for a while. Now flip all the work over to the wrong side and knit the heel as follows:

1 p.: (Seamy side of golf): remove the first loop, but you do not need to knit it. Purl the rest of the loops. Turn the work over. 2 p.: (Front side): remove 1 loop, but do not knit it, 1 front. Repeat to the end of the row. Turn knitting over again. In a similar way, the heel is performed for the next 32 r. Complete 1 p. seamy sides of the heel and go to decrements: on the right side, knit until 12 stitches remain. Yarn over and flip the work over to the other side. Then also remove 1 p., But do not knit it at the same time, purl 8, purl 2 together and turn the whole work over again. Remove 1 st without knitting and knit until 11 sts remain on the needles. Make a yarn from the broach.

In the described way, knit a few more p. As a result of the performed manipulations, the lateral sts of the heels will gradually decrease. But note that the number of loops of the heel itself, that is, those that are between the extreme ones, should remain unchanged and should be equal to 10 p. At the moment when the side loops of the heel part are over, all the remaining loops must be divided by 5 p. Into each spoke. On the third knitting needle on the left side of the heel, you need to remove 16 loops and 1 additional stitches between the two knitting needles. Tie the removed items, turning them over in the process of work on the left side. Perform all the loops on the second and third knitting needles, as before, with an openwork pattern. And along the edge of the heel on the right, remove 16 loops and 1 additional stitches between the third knitting needle and the heel piece. Transfer all these loops to those five loops that you put into work a little earlier. The removed loops knit persons., Turning them over, and then 5 persons. loops on the heel.

You knit the loops on the second and third knitting needles with an openwork pattern according to the scheme, and knit the loops on the first and fourth knitting needles with a "front surface" pattern, at the same time, making a decrease in the golf toe. For the toe: at the end of the first knitting needle, perform the last 2 points, as one, and on the fourth knitting needle, tie the faces together. 2 first p. One p. will be intermediate with the same subtractions. Make 1 more same row. Then 1 p. with reductions, 3 intermediate rows without reductions according to the previous description and knit in a similar way until 16 loops remain in the work. Moreover, we mean all the knitting needles. Knit the sole of a golf course with a straight cloth until it reaches the desired size. In order not to be mistaken with its length, in the process of work, it will be necessary to periodically apply it to the foot. After you reach the length that you need, at the end of the first and third knitting needles, tie 2 stitches together. Do these decreases until there are 7 stitches left. Now such reductions must be made in each p. Finally, cut the working thread and pull it through the remaining loops. Secure the thread to the wrong side.

For added strength, several stitches can be sewn with a darning needle. Another golf tie, using the same description. So this pleasant work on extraordinary golf has come to its end. You just have to thread the satin ribbon through the openwork pattern in the first row after the end of the elastic. Wash the finished garments in warm water and dry them horizontally. If you coped with the needlework easily, then all that remains is to congratulate you. You can rightfully be called a professional needlewoman who can handle any product.

Stylish openwork knee-highs with a description of knitting for beginners.

Yarn (100% natural wool, 160 m / 50 g) - 200 g blue;

1 set of knitting needles # 3 and # 3.5.

ELASTIC

Alternately, 1 front and 1 purl.

FACIAL EQUIPMENT

Front rows - front loops, purl rows - purl loops (when knitting in rows in the forward and backward directions); for circular knitting - only face loops.

OPENWORK PATTERN

Knit on 28 initial loops according to the pattern. The diagram shows odd rows, in even rows, knit loops according to the pattern, knit yarn overs with front knit.

Repeat the rapport constantly, repeat the 1st-16th rows in height.

DOUBLE HINGES

Hold the thread before work. Insert the needle in the direction to the right in the 1st p., Then remove the loop and thread together, pull the thread tightly back to avoid the appearance of holes. In this case, the loop tightened on the spoke turns out to be double.

DENSITY OF KNITTING

26 p.x 35 p. = 10 x 10 cm, knitted with an openwork pattern on the needles No. 3.5;
28 p.x 39 p. = 10 x 10 knitted with front stitch on needles # 3.

WORK DESCRIPTION

On the # 3.5 stocking needles for each golf course, dial 84 sts (= 21 sts on each knitting needle). Next, knit with an openwork pattern in circular rows, starting at arrow A, while for sizes 1 and 2, perform reductions, as indicated, in 32, 64, 96, 128 and 160th rows; for size 3 in 32, 64, 96 and 128 rows, knit according to the pattern = 54 (54) 60 p.

Simultaneously through 8 rapports = 128 p. go to needles number 3.

After about 50 cm = 192 p. from the initial row of the loop once again evenly distribute on the needles as follows: 1st needle = 13 (14) 15 sts, 2nd needle = 14 (13) 15 sts, 3rd needle = 14 (13) 15 sts ., 4th knitting needle = 13 (14) 15 sts. Leave the 2nd and 3rd knitting needles.

HEEL-BOOMERANG

Loops of the 1st and 4th knitting needles = 26 (28) 30 sts. Distribute into 3 parts = 9 - 8 - 9 (9 - 10 - 9) 10 - 10 - 10. On these loops, knit in shortened rows with the front stitch as follows :
1st p. (= knit. row): all loops, including the last p. of the 1st knitting needles knit persons., turn.
2nd p. (= out. row): 1 double sts, the remaining sts of the 1st knitting needles and all sts of the 4th knitting needles knit out, turn.
3rd p.: 1 double st., Then all remaining sts of the 4th and 1st needles to double sts at the end of the p. knit persons., double p. leave untied, turn.
4th p.: 1 double p. And knit again until double p., Turn.

Repeat 3rd and 4th p. until the last double sts began to knit with the outer loops of the middle third of the heels. Now knit in all loops, including the left loops, with the front stitch, while in the 1st circle. R. for double loops, grab both walls at the same time and knit as 1 person.

After that, leave the loops of the 2nd and 3rd knitting needles again, and then knit along the loops of the 1st and 4th knitting needles in shortened rows as follows:
1st p. (= knit. row): knit middle third loops., turn.
2nd p. (= purl. row): 1 double p., then the rest of the loops, including the last loops of the middle third, knit, turn.
3rd p.: 1 double p., Then knit all the remaining p. To the double p. At the end of the p., At the double loop, grab both walls at the same time and knit as 1 knit, the next p. Knit faces., Turn.
4th p.: 1 double p., Knit the entire row to double p. Purl, at the double loop, grab both walls at the same time and knit with a purl, turn.

Repeat 3rd and 4th p. until one double loop is made on the outer loops of the heel.

FOOT

After the last purl row, knit in all loops, including the left loops, in circular rows of faces. satin stitch, while in the 1st circle. R. at the double loop, grab two walls at the same time and knit as 1 person. NS.

MOUSE

Decreases are performed as follows:
On the 1st and 3rd knitting needles, knit all loops, except for the last three stitches, knit 2 stitches together, then knit 1 stitches.
On the 2nd and 4th knitting needles knit persons., Then 2 p. Together with the front one with a tilt to the left (= 1 p. Remove as persons., Next p. Knit persons., Then stretch the removed p. Through it).

Perform these reductions in 1, 5, 8, 11, 13, 15 17 circle. R. In each row, make decreases until 8 sts remain on the needles. Pull these loops tightly with a working thread. Fasten the thread on the wrong side.


Knee socks knitting for beginners

Previously, knee-highs were an integral part of women's wardrobe. And recently, tights and stockings have replaced them. But fashion is back! Knee-highs have gained popularity again, especially with young women and girls. After all, they help to create different images: from a hooligan - rebellious to gentle and romantic. We invite you to knit socks with knitting needles schemes and descriptions are presented in this article.

Openwork white knee-highs

The model is calculated for size 37/38.

We need:

  • mixed composition yarn - cotton / acrylic (50g per 150m) - 100g;
  • set of sock knitting needles. # 2.

What patterns we will knit:

  • elastic band: 2 persons x2 life;
  • persons. surface: for circular knitting - all front loops; with direct knitting - in persons.r. facial loops, in. R. - purl;
  • openwork pattern: knit according to the pattern.

Knitting density: 20p. for 31r. correspond to a square of 10 cm by 10 cm.

Description

The principle of knitting golf is exactly the same as for knitting socks in the classic way. We begin to knit socks with knitting needles on top.

We dial 64p. and go to circular knitting, distributing the loops over 4 knitting needles (16 pcs.). We knit 4 cm of elastic bands and start knitting an openwork pattern.

Having knitted 33 cm, we begin to knit the heel. We do this using the usual description of the classic beginner heel knitting. We work on half of the loops (32 pcs.), That is, on two knitting needles. Straight and reverse knitting is performed on persons. satin stitch 20 p.

To round the heel, we divide all the loops (32 pcs.) Into three parts: 11p. + 10p. + 11p. = 32p. We continue to knit only the central 10p., Grabbing one loop from the outer parts in each row.

We knit these loops with the outer loops of the central part in one loop. As a result, we will have only 10 items of the central part.

On the lateral parts of the heel, we lift from the edge 10 points on each side. We include in the work the previously put off loops and again go to circular knitting. Moreover, we knit the bottom of the product. satin stitch, and the top - with an openwork pattern.

Having knitted up to the height of the little finger (it is advisable to make a fitting), we perform reductions on the toe: on both sides, we knit the extreme loops on the knitting needles two at a time.

Moreover, at the beginning of the row it will simply be knitting two loops into one, and at the end - the so-called. broach: remove 1p. as front, we knit 1l. and stretch it through the removed item. In one row, we subtract 4p in this way.

When at each cn. 2 sts will remain. we break off the thread, thread it through the remaining loops, pull it together, bring it out. side, we fix. Socks are ready!

Knitted knee-highs on two needles without a seam: video master class

Jacquard knee-highs

Model calculated for size 38.

We need:

  • b / w yarn of red and white colors - 100 g each;
  • b / w yarn of purple and gray colors - 50 g each;
  • a set of knitting needles No. 3.5;
  • marker (M).

What patterns we will knit:

  • persons. satin stitch: with circular knitting, all knit loops;
  • patterns according to schemes.

Knitting density: on a jacquard pattern, 25 loops correspond to 10 cm.

Description and diagrams for beginners

For convenience, the schemes in the description are divided into two: braids and jacquard, which, in turn, is divided into several parts.

We collect 60 sts with a red thread and distribute it to 4 bn., Put a marker and go to circular knitting. Having knitted 8p. persons. p., continue on cx. No. 1, repeat the rapport 15 times per row, perform from the 2nd to the 6th p. and then repeat from 3rd to 6th p. 4 times. In the next r. add 8p evenly.

We get 68p. We continue knitting in cx. # 2:

1p: repeat rapport from 2p. for the whole row;

2p .: according to the scheme;

3r.: White yarn faces. NS.;

4p .: white yarn of faces. p., evenly adding 4p. Total -72p.

We continue knitting in cx. No. 2, starting from the 3rd p. Having knitted from the 4th to the 15th p., It is white. color knit 2p. Then 16 rubles. and 17 p.

Change the color to red. and we knit plaits along the cx. No. 1: 1p, from the 2nd to the 6th p. and from the 3rd to the 6th p., 1p. persons. NS.

We continue along the cx. No. 2: 1st p., 2nd p., From 18th to 32nd p. Two p. persons. the loops are white. color. In the last p. we subtract evenly 8 p. 64 p. remains.

We work on cx. No. 2: we knit the 16th p., Subtracting 4p. , 17th p.

Change the color to red. and link to cx. No. 1: from the 1st to the 6th p., From the 3rd to the 6th p. 3rd p.

We pass to cx. No. 2: 1p., 2p. In the last p. we subtract evenly 4p. We have 56 sts. Then knit from 33rd to 45th p.

Again we go back to white: 2p. persons. with a decrease of 4p. in the last p. We have 52 p. Further - cx. # 2: 16th p. and 17th p.

Red thread: 1p. persons., then: * 1l. red, 1 l. gray * - repeat from * to * - for the whole row. Knit 7 such rows. Perform 1p. red

Heel decoration

The knitting principle is the same as in the previous model. Red a thread of faces. ch. knit 26r. by 26 p. We distribute them as follows: 8p. + 10p. + 8p. = 26p.

Having formed the heel, we get after a decrease of 10 points on the spoke. Raise the edges of the heels by 14p. at both sides. We make one decrease: 2p. we knit in 1p. Taking all the loops into work, we get 63p on the needles. We knit them in a circle: on the 1st and 4th cn. persons. hl., on the 2nd and 3rd bldg. jacquard pattern.

We make the deductions:

1p .: * 2l. red, 1l. white * - from * to * repeat three times, ** 2l. red, broach white, 3L. red, 1l. white ** - from ** to ** repeat 7 times, *** 3 y. red, 2p. in 1L. white *** - repeat from *** to *** 5 times. Total 59p.

We continue to decrease until in each 2p. there will not be 55p.

Foot

Continue: 1p. purple, 1p. white, from the 49th p. to the 61st p. by cx. No. 2, 1r. white, 1p. purple, from 46th to 48th p. by cx. # 2.

We do: 1p. purple, 1p. red. In the next. p .: * 2l. red, 1l. white * - repeat from * to * to the end of the p. So do another 3p.

Continue: we decrease 7p.: * 2p. in 1L. red, 1l. white * - repeat from * to *. We have 47p. After completing 4 p. according to the picture, in the next. R. we subtract 7p. We have 40p. Another 3p. red

Toe

The first and last items of each of the joint ventures. we knit in 2p. in 1p. We have 32p.

After 3p. we repeat the row of decreases. After another 2p. - a row of decreases. We have 16p.

After another 1p. - a row of decreases. Break off the thread, thread it through the remaining loops, pull it off, bring it to the wrong side and fasten it.

If you wish, you can roll on the top edge - see photo. To do this, we twist the edge and crochet with a purple thread: crochet at the harness from the inside out, * 4 air stitches, 1 double crochet between the harnesses from the front side *. Repeat from * to * - for the whole row. Roll height comes out about 1cm.

For strings, make cords from thread in several folds. You can crochet the lace from air loops. Pull the lace through the holes - see photo. Tie knots at the ends of the cord.

Warm winter knee-highs: video master class

Dimensions (edit): 35/36 (38/39) 41/42.

To knit golf you will need:
300 g Qual Drops Karisma melange yarn (100% wool, 110 m / 50 g);
set of stocking needles number 3.5.

Elastic: alternately 2 facial, 3 purl.

Front surface: front rows - front loops, purl rows - purl loops, in circular rows knit only front ones.

Purl surface: in circular rows, knit only purl.

Braid Pattern: the number of loops is a multiple of 5.
Knit according to scheme 1, in even circular rows, knit loops according to the pattern.
Repeat the rapport loops.
Repeat from 1st to 4th row.

Irish pattern (width 36 loops): knit according to pattern 2, in even circular rows, knit according to the pattern. Repeat from 1st to 24th row.

Density, Irish stitch: 22 sts and 30 rows = 10x10 cm.

KNITTING OF GOLF.
Cast on 80 (90) 100 loops on the knitting needles and knit 2 cm with an elastic band for the lapel, 18 cm with a braid pattern. Then turn the lapel up and knit 1 row with the front ones, evenly subtracting 14 (18) 22 loops = 66 (72) 78 loops (on the 1st and 4th knitting needles 15 (18) 21 loops, on the 2nd and 3rd knitting needle, 18 loops).
Knit 1 row with purl, then knit with purl on the loops of the 1st and 4th knitting needles, on the loops of the 2nd and 3rd knitting needles with an Irish pattern.
After 5 cm from the lapel, make decreases as follows: on both sides of the Irish pattern, every 2 cm 11 (12) 13 times, knit 2 loops together with purl = 44 (48) 52 loops.
After 33 (36) 39 cm from the lapel, knit the heel.
To do this, set aside the middle 24 loops of the 2nd and 3rd knitting needles, on the remaining 20 (24) 28 loops, tie 5 (5.5) 6 cm for the heel wall with straight and reverse rows of 5 (5.5) 6 cm with front stitch.


After that, on medium 8 (10) 12 loops, knit a straight lower part of the heel according to the general rules for knitting socks.
After that, on the side walls of the heel, dial 11 (13) 15 loops on both sides and knit again on all loops in circular rows, while knitting the loops of the 1st and 4th knitting needles with the front stitch, 24 loops of the 2nd and 3rd Irish knitting needles.
To decrease the wedge of the instep of the foot, knit in each 2nd row the last 2 loops of the 1st knitting needle together with the front knitting needle, and also knit the first 2 loops of the 4th knitting needle together with the front knitting needle, until 42 (48) 54 loops remain.
After 19 (20.5) 22 cm from the middle of the heel for size 35/36, transfer the 1st loop of the 2nd knitting needle to the 1st knitting needle, as well as the last loop of the 3rd knitting needle to the 4th knitting needle, for size 42 / 42 transfer the last loop of the 1st knitting needle to the 2nd knitting needle, and also transfer the 1st loop of the 4th knitting needle to the 3rd knitting needle = 10 (12) 14 loops on the 1st and 4th knitting needles, 11 each (12) 13 stitches on 2nd and 3rd needles.
Then complete the toe with the front satin stitch according to the general rules for knitting socks.

OPENWORK GOLF

The motif of the pattern - a herringbone - alternates with triple rhombuses. The golf eraser consists of openwork rhombuses and a triangular ornamental strip.

For golf, you need 250 g of cotton "hosiery" threads, 5 needles No. 1 or No. 1.5.

Sample 5 cm - 16 loops. The largest leg (lower leg) volume is 35 cm.

In order to know the exact number of loops, they knit a sample and determine how many loops are in 5 cm, then the volume of the leg is multiplied by the number of loops in one cm.

For example: (35X16): 5 = 112 stitches.

You should also check if the number of stitches recruited is divisible by the width of the golf pattern. In this case, 3 different patterns are assumed, so you should check if the loops of the patterns are divided by the number of loops to be dialed. For example, the initial motive is divided into 8 (Fig. 425, A), 112: 8 = 14 motives; the second motive is divided into 16 (Fig. 425, B) 112: 16 = 7 motives; the main motif is divided into 36 (Fig. 425, B), 112: 36 = 3 motifs (4 extra), which means that these 4 loops in the purl should be reduced throughout the knitting (2 loops on each knitting needle) by tying them purl instead of.

Since the openwork pattern of golf is very large, the figure shows only the construction of lace, after each row shown, one front row should be knitted with front loops.

Such a large pattern at the ankle is very difficult to subtract, so they pick up golf and begin to knit on needles no. 1.5. On these knitting needles they knit an openwork eraser and once the whole large pattern (96 rows), then knit on thinner knitting needles (No. 1) and, approaching the rhombus, in the widest places, additionally knit 2 loops together with the front on each side. Another 96 rows are knitted on thin knitting needles and once again, at the widest point of the rhombus, 2 loops are knitted together with the front one on each side, so reaching the heel, 12 loops are reduced (2 times, 6 loops in each row). Each spoke has 24 stitches.

When knitting a heel, position the large pattern so that it is in the middle of the heel (the center shown in the illustration is on the front of the golf course).

As in previous golfs, a heel is knitted on 2 knitting needles, the heel is reduced on the same knitting needles on which the heel was knitted, only in this case, at the beginning of the 4th knitting needle, the first 2 loops are knitted with purl, and then 2 loops are knitted together with the removal, at the end of the 1st knitting needles, the third and fourth penultimate loops are knitted together with the front one, the last 2 loops are knitted with the purl. The lower part of the foot is knitted with the front stitch, the upper part - in accordance with the pattern.

On the toe, the loops are reduced in the same way as in the previous case, with the only difference that between the decreases, this time there are 2 purl, not front loops.

Nowadays, homemade warm accessories are gaining more and more popularity. Slippers, footprints, socks and even knee-highs: you can knit all this at home, giving the product value and quality.

Warm friends

As soon as the cold weather begins, people immediately begin to prepare for winter, making edible preparations, various household chores, making knitted socks and slippers. They, as it turned out, are indispensable accessories for any wintering, as they do an excellent job of keeping our feet warm. Therefore, such a detail is always at home, even with a spare kit for guests.

Knitted variety

Everyone chooses a product for themselves, relying on personal preferences. So, if slippers are a long-worn and boring piece, then knitted knee-highs look very interesting and unusual, compared to other household attributes. Moreover, they can be made at home with your own hands, using scrap materials.

Of all the lace and variegated variety, let's pay attention to jacquard knee-highs with knitting needles, the schemes of which will be discussed in detail below. This style of knitting is very suitable for the winter season. In addition, thanks to this choice, we will be able to decorate our knee-highs with any patterns that can only be depicted on the diagram.

All you need

It's time to decide on the materials that we will use in the future. If you are a fairly experienced craftswoman practicing knitting, you should already have all the necessary set. But do not worry if it is missing, since you can use all the purchased equipment in all the following projects.

  • A set of hosiery knitting needles. In our case, we only need 4, connecting them, we get the perfect girth for the product. The thickness is chosen based on the thickness of the thread.
  • Yarn. It is best to choose a thread with a low wool content so that the garment is not too prickly for the leg. In addition, such a thread is quickly wiped. The perfect combination of synthetic and natural fibers allows you to achieve a high wearing and comfortable golf course. Remember to use multiple colors to show the knitted pattern.
  • In order to make knee-highs with knitting needles, pattern patterns are also needed. So, in order.

Knee-highs with knitting needles: schemes and description for beginners

Let's consider this issue in detail. Now everything is ready in order to knit the socks with knitting needles, the schemes and descriptions of which you can find below. To facilitate the perception process, we will describe all the important points in stages. By making knitting accessible even for real beginners in this business. So:

  1. Before you start knitting socks with knitting needles, the schemes and description must be carefully considered in order to understand all the features. Our pattern does not represent anything complicated, as it is simply a combination of threads of two colors, which alternate according to the pattern. Now you can get to work.
  2. We collect sixty-eight loops on four knitting needles so that each of them has an equal number. Now we knit an elastic band consisting of 2 front and 2 purl loops, alternating with each other. In this way, we knit about fifty rows to create a dense base.
  3. Now we knit ten rows simply with the front stitch, preparing a place for. According to the scheme, we knit each loop, carefully following the colors of the thread. A careful attitude will help avoid confusion and further distortion of the drawing.
  4. After the main ornament is ready, you need to knit about ten rows with ordinary threads with the front satin stitch, creating knee-highs with knitting needles. The diagrams and descriptions below indicate that the reduction of loops begins. The next row we knit each of them together with the adjacent one. Getting double loops, decreasing in number.
  5. We knit the familiar elastic again, like at the top of a golf course. In parallel, remove the loops from each knitting needle, alternating one decrease on the first knitting needle, then two decreases on the second, and so on, until we do this on four knitting needles. After that, we continue to knit the elastic for ten more rows.

Without a heel - nowhere

And finally. Now is the time to knit a golf heel with knitting needles, the schemes and description of which are almost complete. We distribute the loops over the knitting needles, leaving 10 units on the first, and 8 on the even ones. All remaining loops are moved to the third knitting needle.

We knit all the loops on the first knitting needle, and finish the last part with the first loop of the second knitting needle. After dialing ten more loops, you need to knit 3-4 rows with front loops. You can use the same color or a contrasting one taken for the pattern. Now we knit to the desired length so that the leg is comfortable.

We complete the product by knitting all the loops for five more rows, and then, subtracting two units on each of the knitting needles. Then we collect the remaining loops on the thread and tighten them into a tight knot, tucking the unnecessary fragments inward.

That's it, so the knee-highs are ready with knitting needles. Schemes and descriptions can be put aside and admire the finished result. The products turned out to be soft, absolutely not prickly and so invisible to the body that you hardly want to take them off throughout the winter.