Garlands on the veranda with their own hands. DIY garlands - aesthetically pleasing, original and economical. Garlands made from natural materials

oneperfectdayblog.net

Choose tartlets in classic Christmas colors: green, red and white. Such bright Christmas trees will appeal to both adults and children.

What do you need

  • multi-colored paper tartlets (cupcake molds);
  • glue;
  • decorative sequins in the form of stars;
  • twine or ribbon;
  • Scotch.

How to do

Fold the paper cutter in quarters to form a triangle.

Lubricate the corners of two triangles with glue. Lay three triangles on top of each other and glue them together to form a Christmas tree. In the same way, make as many Christmas trees as you need for your garland.

Decorate them with sequins. If you don't find star-shaped sequins, just cut them out of colored cardboard.

Then glue the Christmas trees to the twine or ribbon with adhesive tape at a small distance from each other. The garland is ready! Decorate with it or hang it on the wall.


purlsoho.com

It is very easy to make such a beautiful soft garland. The amount of material depends on the desired length of the decoration.

What do you need

  • white and red strips of felt 2.5 cm wide;
  • 2 needles;
  • threads.

How to do

Lay the white strip of felt over the red one and pin them on both sides with needles. Then make longitudinal cuts in the middle of the strips at the same distance from each other.


purlsoho.com

If you want to make a very long garland, cut the felt gradually: make no more than five cuts at once, move on to weaving, and then repeat the procedure. Thanks to this scheme, the strips will not move out, and it will be much easier for you.

To braid a two-tone braid, thread the end of the strip through the first hole and pull tight so that the strips do not fall apart. Then thread the garland through all the other holes in the same way.


purlsoho.com

Trim and sew the strips to each other at the ends of the finished garland so that they do not stick out. By the way, you can combine any colors of your choice. For example, these:


abigail.engineer


thecheesethief.com

These miniature stars look like glass, even though they are made from plain cellophane! This material is not as malleable as paper, but such an unusual garland is worth the work done.

What do you need

  • cellophane;
  • lined sheet of paper;
  • scissors;
  • thin needle;
  • thin threads.

How to do

Cut the cellophane into strips. It is more convenient to do this by placing a lined sheet of paper under the cellophane. Please note that the length of the strips should be at least 30 times their width. In other words, if the width is 1 cm, then the length must be at least 30 cm.

Then make stars out of the stripes as shown in this video:

Carefully pierce the stars with a needle through which a long thread is threaded. The stars should be at a small distance from each other.

By the way, garlands of paper stars also look very nice. Therefore, choose the material to your taste.







rhiannonbosse.com

This option is suitable for those who want to diversify the usual old garland.

What do you need

  • white paper cups;
  • a sheet of plain paper;
  • pencil;
  • scissors;
  • scrapbooking paper;
  • glue or double-sided tape;
  • stationery knife;
  • electric garland.

How to do

First you need to make a "wrapper" for the cups. To do this, cut one glass in half, cut off the bottom and edges. Flatten it, put it on plain paper and make a template.

Lay the template on the back of the scrapbook paper and cut out as many wrappers as you have cups. By the way, you can choose any color of paper. Just try to match it in color with an electric garland.

Then wrap the cups in paper and glue the edges with glue or double-sided tape.

Make cross cuts in the bottom of each cup with a utility knife. Insert the light bulbs of the electric garland into the cuts. Unusual New Year's garland is ready!


createcraftlove.com

Another way to transform a boring electric garland.

What do you need

  • decorative burlap of New Year's flowers;
  • scissors;
  • electric garland.

How to do

Cut the burlap into equal small strips. Tie them in turn with a knot between the electric bulbs.


createcraftlove.com

Very simple and beautiful!


annfarnsworth.com

This beautiful garland looks very impressive, and it is very simple to make it. If you do not have twine, you can use thick threads or yarn.

What do you need

  • Balloons;
  • petrolatum;
  • ½ l of PVA glue;
  • 2 tablespoons of cornstarch;
  • 2 tablespoons of warm water;
  • twine;
  • needle;
  • electric garland.

How to do

Blow up balloons of the same size. Note: a garland of small balls will look prettier. Lubricate them with Vaseline. This is necessary so that the twine does not stick to the balls tightly.

Mix glue, starch and water. If the mixture is too thick, add a little more water. Just do not overdo it so that it is not very liquid.

Wet the twine in the resulting adhesive solution. Then wrap the rope around the balloons. The easiest way to do this is to hang the balls on a rail. Just do not forget in this case to put an oilcloth under them, where excess glue will drain. The density of the balls of the future garland depends on how much twine you wind.

Leave the balls to dry overnight. Then pierce each balloon with a needle to make it burst. First check whether the twine has become stiff enough and whether the finished ball will hold its shape. Remove the balloon carefully.

Then insert the bulbs of the electric garland into the balls of twine. If the balls turned out to be very dense, then you can make holes in them with scissors or a pen.


stubbornlycrafty.com

For such a garland, you need thick paper, such as cardstock. But thin cardboard is fine too.

What do you need

  • thick paper (gray and several other colors to choose from);
  • scissors;
  • hole puncher;
  • glue;
  • twine.

How to do

Cut the gray paper into strips of 3 x 10 cm. The parameters of the strips from the rest of the paper are 2.5 x 20 cm. The number of strips depends on the desired length of the garland.

Fold the gray stripes into octagons and make holes for the twine with a hole punch as shown in the photo. Then glue the edges of the octagons.


stubbornlycrafty.com

Now make the light bulbs. To do this, fold the long strip in half, only slightly running your fingers along the fold. Holding the strip by the tips, press it to the palm of your hand. When you release the paper, it will take the shape of a light bulb.


stubbornlycrafty.com

At the ends of the strip, exactly in the middle, make a hole for the twine with a hole punch. Thread the twine first through one hole on the gray octagon, then through the light bulb, and finally through the second hole in the octagon. Repeat these steps with all the other details and align the "bulbs" along the length of the twine.


stubbornlycrafty.com


acupofthuy.com

Such beauty can become not only a New Year's decor, but also a decoration for a children's room.

What do you need

  • A4 paper packaging;
  • template (download);
  • scissors;
  • glue stick;
  • Double-sided tape;
  • threads.

How to do

Print and cut out the templates, circle them on sheets of paper as shown in the picture below. For the garland, you need 24 of the first and second parts of the lanterns and 126 stars. And to speed up the process, draw stars on sheets folded four times.

Cut out all the details.


acupofthuy.com

Take one part of the flashlight and grease one side with glue. Glue the same part to it. One flashlight should consist of six identical parts. Just do not glue the sides of the first and sixth parts until you have made a loop.

To do this, stick double-sided tape on the fold. Glue the thread from the bottom up, make a small loop at the top, then glue the thread from the top down and cut off the excess. Now you can glue the sides of the first and last parts.

Repeat the same with the rest of the flashlight parts. In total, you will get 8 flashlights.


acupofthuy.com

In the same way, make 21 volumetric stars. The difference will be only in gluing the thread. It must be stretched through three stars, making a loop on the topmost of them.

Now pull a thread through all the loops, forming just such a beautiful garland:


acupofthuy.com


linescross.com

It is enough just to cut out the details according to the finished template and decorate them with sparkles.

What do you need

  • thin cardboard;
  • template (download);
  • scissors;
  • stationery glue;
  • colored sequins;
  • twine.

How to do

Print on thin card stock and cut out the templates along the solid lines. The number of parts needed depends on the desired length of the garland. Bend the blanks along the dotted lines.


linescross.com

After one, grease the triangles on the templates with glue and sprinkle with sparkles. When the glue dries, shake them off. You may need to repeat these steps one more time so that the triangles are completely covered in glitter.


linescross.com

Then glue the semicircular parts on the templates with glue and glue the figures. Pull the twine through the figurines. If you're afraid you won't be able to do this, run twine through each figure before gluing, not after.


thepartyteacher.com

Such Christmas trees can be decorated with anything: sequins, sequins or buttons. Connect your fantasy!

What do you need

  • green tissue paper;
  • scissors;
  • glue;
  • yellow cardboard;
  • red cardboard;
  • twine.

How to do

Straighten the tissue paper. By the way, this can be done with an iron, setting it to the lowest temperature. Fold a long sheet in half crosswise and cut lengthwise into two parts. You will get two long strips folded in the middle. Make long cuts on them, leaving part of the fold intact. You will need as many of these details as you want to make Christmas trees for the garland.


thepartyteacher.com

Unfold the strip and twist it thinly. At the fold, make a loop and twist several times so that it does not fall apart. If desired, you can fix it with glue.


thepartyteacher.com

Tie the resulting Christmas trees to the twine. Then cut out stars from yellow cardboard, and circles from red cardboard and glue them. Try to fasten the stars so that the knots on the twine are not visible.


shelterness.com

And finally, an option for those who have absolutely no time to make something, but there is a great desire to update the New Year's decor.

What do you need

  • beautiful Christmas balls;
  • twine.

How to do

All you have to do is thread the twine through the loops of the Christmas balls, tying it in knots and place the balls at the same distance from each other.

How to decorate your house before the holiday, bring solemnity and taste to its atmosphere? The easiest and most creative way is DIY paper garlands. Today there is nothing easier than making jewelry yourself. Even a young student can cope with this. On this page you will find a variety of schemes for making themed garlands, as well as interesting templates with which you can cut out an innumerable number of decorations for home and office.

Paper garlands "Ribbon Rainbow"

You can hang this garland both vertically and horizontally. In the latter case, it is better to attach a weight, such as plasticine, to the end of the thread.

1. Fold the colored paper in half and cut the halves.

2. Cut strips from colored paper.

3. Prepare the thread and fold your strips in the desired sequence.

4. Sew all the strips together using a sewing machine or thread with a needle.

* You can twist the ribbon to make the garland look "fluffy".

* Colored paper or cardboard can be replaced with wrapping paper, which is usually used to wrap gifts.

* If you don't want to stitch, you can try sticking a thread to each strip - this will take longer and it is desirable that the thread is thicker.

Standard garland "Snake"

Even the smallest children, who have barely learned to hold scissors in their hands, will cope with the preparation of "snakes". So, if you have kids, take them with “snakes”, and start more difficult work yourself.

Manufacturing technique: Cut out a large circle from paper and, stepping back a centimeter - another from the edge, start cutting off the tape (see photo) until you reach the center. If you nevertheless entrust this simple task to a child, it is better to draw in advance with a pencil the lines along which he should cut - this will make it easier for the child to work.

Garland "And they dry on a rope ..."

How do you like this idea: in the middle of the room there is a clothesline, on which old Santa and his faithful deer hung their holiday clothes to dry: red caps, mittens, boots with bells, big pants, a bag ... First you have to sew miniature clothes (you can, of course, get similar in toy stores, but it will be more expensive), and then secure them with small clothespins (you can use large ones, of course). If you don’t want to fool around for a long time, hang your mittens or colorful socks to “dry”. And you can mix both. You can simply cut out multi-colored boots from felt or paper and string them on a thread.

How to make a garland "Christmas rings"

This method of making a garland is one of the most popular. This is not only because it is quite simple, but also because it allows you to make beautiful paper decorations for the home, and in particular for the Christmas tree.

1. Prepare colored paper and measure the same width for the strips you will cut out.

2. Start cutting strips. The length of each will be equal to the width of a sheet of paper (i.e. 21 cm) and the width will be approximately 3.5 cm.

* You can make a garland from shorter and narrower strips, then the rings will be smaller.

3. Glue the strips by threading one through the other (see picture).

* You can close the circuit.

Garland "Volumetric stars"

Such stars easily spin from paper tapes one or two centimeters wide. Carefully study the photo-instruction and go!

Paper Christmas garlands "Unusual chains"

Prepare colored paper, scissors and glue. It is easy to make such a garland.

1. To make an unusual chain, you need to fold a piece of paper in half and draw, for example, one of the shapes shown in the picture.

* In order not to waste a whole sheet of paper on one link, you can cut it into 2 or 4 identical parts, from which you will cut the links later.

* For convenience, you can make a link template.

2. Cut out the shapes and start gluing them together to make a chain by threading one link through the other.

* The longer you want to make the chain, the more links you will need.

* You can use many different colors to make the garland even more colorful.

How to make a garland "Chain" for decorating a house out of paper

You can use 2 or more colors.

1. First you need to make a preparation. Cut several strips of the same size. In the picture, the strips are 2 cm wide and 17 cm long.

* It is advisable that you comply with the following condition: width / length of the strips = 1/8 + 1 cm spare.

2. Mark the center of the strip by folding it in half and straightening it.

3. Bend the ends of the strip to its middle and fold the strip in half again.

4. Prepare a few of these blanks to start assembling a garland. The picture shows how to fold the blanks together.

* This garland can be hung on the wall. Due to the fact that it does not bend much, it will be difficult to hang it on a Christmas tree, but it still looks impressive.

Garland of hearts

The pictures show detailed instructions on how to assemble a garland cordially.

This version of the garland can be complicated, and you get such a beautiful product.

Garlands for the New Year "Colorful home decoration"

From colored paper, you can make such a colorful decoration for your home. It is suitable for the New Year, and for any children's holiday.

Prepare colored paper, scissors and glue (you can replace it with a stapler or tape).

The picture shows how to make blanks.

* It is desirable that the strips have the same width.

Use glue, a stapler, or tape to hold the pieces together.

Using the same technology, you can fold just such a garland. And you can learn how to do everything right from the video below the picture.


Volumetric New Year's garland

Here is a pretty simple but very original garland idea that can be hung on a window or just anywhere in the house.

The images show step-by-step instructions on how to make a garland.

* In the Christmas tree, the hole through which the thread is threaded is made with a hole punch.

Garland for the Christmas tree "Merry candy wrappers"

Very beautiful tinsel can be obtained from ordinary wrappers.

1. Cut the wrapper into several identical pieces.

* The pieces can be 2x4 or 3x5 in size, and depending on the size of the wrapper, there can be 3, 4 or 6 pieces.

* For convenience, you can make a template that will help make all parts of the tinsel the same size.

2. Start twisting each rectangle into a tube, but do not let go so that it does not unfold.

3. Prepare a dense thread with a needle and start stringing the tubes one by one. The edges of the tubes turn around - this is good, because. tinsel will turn out fluffy.

4. At the end of the thread, you can make a knot so that the tubes do not come off.

* After stringing all the tubes, turn them in different directions.

New Year's garlands made of paper using the "Origami" technique

1. We make blanks. For one step of the garland, you will need 2 strips of different shades.

* The length of one strip is 21 cm (which is the width of a regular A4 sheet), and the width is 3.5 cm.

2. Start folding the strips in sequence, as shown in the picture.

* The final goal is to make two long ribbons that will form a rainbow.

3. We connect the end of one tape to the other at an angle of 90 degrees.

4. Continue to fold the strips in sequence - vertical down, horizontal across.

* The circuit, if desired, can be closed.

Garlands for the New Year (a few examples)

Amazing paper garlands

Perhaps the simplest and most popular New Year's garlands that can be made at home, even with the involvement of a child, are paper garlands. For these purposes, it can be used in a variety of ways, ranging from ordinary colored sheets to lace napkins and multi-colored adhesive tapes.

Such decorations are even made in kindergartens and elementary grades, so anyone can handle them. So, you will need paper, scissors and glue. Sheets of paper are cut into strips of the same width (to make this easier, divide the paper with a ruler and pencil in advance).

The cut strips are glued together into one common garland according to the principle of an ordinary chain, which consists of links. To get something more original, try playing with the shape of the links: make them square or even voluminous, although this will be a little more difficult. You can make it even easier: colored paper is cut into thin strips, and then they need to be sewn in the center with each other, usually a machine is used for this purpose, but you can also do it manually.

The stripes can be replaced with circles, triangles, or any other shapes that come to your mind. By the way, instead of paper, you can use bright felt, such products will turn out to be more durable. Such decorations, by the way, look very impressive in door or window openings in an upright position.

Exquisite snowflake garlands

One of the main symbols of the New Year is, of course, snowflakes. So why not use them to decorate your own home? Probably, each of us remembers from childhood how to cut beautiful and openwork snowflakes. The more cutouts, the more sophisticated the snowflake will turn out, by the way, especially for this, you can find a whole lot of schemes on the Internet that will help you make a lot of diverse figures.

Next, we connect each snowflake with a regular thread or silver rain, and then hang it from the ceiling. By the way, such decorations will look more beautiful if there are a lot of them, so it is better to make 5-10 such garlands, depending on the purpose and place of use.

Garlands made from natural materials

Why throw away tangerine or orange peels when they can easily be used as a handy material? We cut out cute figures from the peel, for example, hearts, stars, faces, snowmen and so on.

Then, using a needle, we string them onto a thread and our decoration is ready! By the way, it will not only transform your home, but also spread a pleasant citrus aroma throughout it. Instead of peel, you can use apples and ordinary spruce cones, sometimes they are dyed in some extraordinary color, or simply put on a thread in their natural form.

The easiest ways to make paper garlands

To decorate your apartment with intricate and whimsical paper decorations, it does not take much time and effort. Paper garlands are light, durable, beautiful and affordable. We will tell you about the easiest ways to make garlands that will decorate your life and cheer you up.

  1. Templates. To facilitate the work, you can use blanks: simply print them out and cut them out of a simple landscape sheet of paper.

These are the New Year's templates you can print and make your own garland.



2. Drawings. If you have basic artistic skills, you can fold a sheet of paper several times, and then draw on it the picture you need.


3. Snowflake garlands. Delicate lace decorations made of plain paper - it's easy! Use templates or make your own design.

Use templates to make snowflakes or just turn on your imagination.


As you have already noticed, there are a lot of ideas, the main thing is to connect the desire to create and, of course, your imagination, which will help you create the most unusual and unique New Year's garlands!

2016-11-25

Click Class

Tell VK


If we create a New Year's mood, then how can we do without decorating our home. Therefore, today we make garlands for the new year with our own hands. Previously, we have already mastered, and.

Now there are a lot of materials that are easy to change, these are different types of fabric, paper, clay, etc. A stretch on a Christmas tree or a window can also be made from cones, sweets, even food. yes, yes, there are craftswomen who create garlands of gingerbread and candied fruits.

In general, there are an incredible number of ideas, so the article turned out to be quite voluminous and long. But this is only to our advantage, so we will consider many options for inspiration!

So, the most accessible material for us is paper. Therefore, let's remember our childhood and go cut, glue and enjoy life. if you have children or younger brothers, sisters, then invite them to participate in this process. Because it's so interesting!

It is better to take paper of medium density and double-sided. Then the craft will look neater.

So, we will start with flashlights familiar from childhood.

We need two parts. One is 180*120 mm in size, and the second is 180*100 mm. We fold the one that is larger in half and make parallel cuts from the side of the fold without reaching the edge of 1 cm.

We make a tube from a smaller strip, gluing the edges, which have a size of 100 mm.

And now we wrap the resulting accordion around the tuba. We fix the points of contact with glue.


The figures connected together are also a very good idea for crafts, at the end of this section, I will give many templates and stencils for cutting.


Such cute penguins and snowmen can be made according to this pattern.


The links of the garland are connected with threads or wire.


Santa Claus diagram.

Another idea is the links fastened together with glue. So, the simplest option of the rings. Everyone has done this sort of thing!


However, if fantasy and modern materials are applied to this idea, you will get a very stylish decoration.


Often garlands are created from separate elements and connected only by a thread, wire or cord.

Therefore, absolutely any elements of creativity can act in this capacity.

For example, here is a tutorial on how to create cute little stars. A large number of them will make an ornament.

Here is the idea of ​​balls from stripes.

Another familiar idea from childhood flashlights. You need five strips of the same thickness. And they go along the length: 1 strip 5 cm, 2 strips 7 cm each and 2 strips 9 cm each. We fix the edges with glue or sew with threads.


You can use different colors and the simplest shapes: triangle, rhombuses, squares, cones, etc.

Little kids will love making this craft. To do this, take a long strip of colored or corrugated paper. Along its entire length, mark the strips at a distance of 1 cm from each other. And cut them without reaching the edge of 1 cm. It is important to alternate sides. One cut from the right side, the second from the left.


Now for some ideas for inspiration. For example, I liked these cute snowmen.



I was also surprised by the idea of ​​people hanging Christmas trees upside down.


Or here's how interesting they decided to connect the details with the rope. Just tied with ribbons and that's it.


The craftswoman decided to sew these snowflakes on a sewing machine.

Details can be not only flat, but also voluminous. For example, such 3D origami Christmas trees.

The kids will also love the idea of ​​a candy garland. By the way, they can be made from real wrappers.


And this photo shows a step-by-step master class for creating the sweets themselves.

Quite an unusual idea with ballerina snowflakes. Of these, you can make decorations on the windows and on the Christmas tree. Attached are templates and workflow.





You can use not only paper familiar to us, but also newspapers.

Experiment with colors.


sometimes it turns out to create a whole. composition from the details of the garland.


by the way, it can be not only stretched as usual for us, but also hang vertically from the ceiling and look like children's mobiles.

Here is a photo tutorial on how to make the simplest garland with only scissors and a circle of paper.

It is also interesting to make a stretch from the fans. You can combine them by colors, sizes and number of rows of elements.

Such a fan can be done like this. We take a sheet, mark on it stripes 1 cm thick across the entire width. Then we begin to fold them with an accordion. On the marked lines, we bend the sheet in different directions alternately.


The resulting accordion is folded in half.

And we connect the two inner edges with double-sided tape.


And now we connect all the details into one whole.



And if you dream up and use new forms.





Look at the paper leaf garland idea. The main thing is to take winter color options: white, silver, blue, blue and red.


A similar decoration made of volumetric balls looks very stylish.



The photo shows the steps for folding such a blank.


From an ordinary idea, you can turn it into a magical one by simply adding more unusual solutions. For example, use circles of different colors.


Or sew a garland in five minutes from miniature triangles.

Figures hanging from the ceiling immediately create comfort.

Lots of snowman ideas.


Use golden hues in creating decorations, they will decorate any background.


The outlines of houses and tree branches are very memorable in winter. When you walk in the evening, the street sweats, and such a cozy and warm yellow light turns on in the windows.

What other ideas to take? Yes, let's take a look around. After all, there are a lot of winter symbols, for example, a hat.

Light bulbs from electric garlands.



Look at the night sky, there are so many distant stars, for some reason in winter they are associated with blue.



What do we expect from the New Year? Of course, gifts. Let's turn this into decoration.




Remember about unusual shapes? So, this instruction shows how to collapse a volumetric rhombus.


This cube is made according to this scheme.


Remember "snake"? It was definitely made by everyone and candy wrappers.


See how a garland of paper circles is sewn.

Or circles can be folded in half and glue the adjacent side.

According to this scheme, the following garland is made.




As you can see, not only circles can be glued this way, but also squares, rhombuses.

It seemed unusual to me that volumetric cones are used in suspensions. You can also put sweets in there.


Look what a cute composition for decorating the wall.


Another idea with a snowman, snowflakes and stars.



Such a "snake" is created from corrugated paper. Along the entire length of the blue roll, cut off a strip 2 cm wide. Glue a red strip perpendicular to it. Here's what happens.




A few more ideas.


The use of postcards and photographs in the decoration has become unusual.


We take different elements: boots, stripes, Christmas trees. All this will fit.


For Christmas trees, you can use different patterns.


For example, use this one.

You can connect parts both vertically and horizontally.


You can decorate not only the apartment, but also the street.


And these snow balls can be made in five minutes.


For more serious premises, such as offices, it is better to take rectangular or triangular flags in pleasant colors.


Cupcake molds make a wonderful Christmas tree.



And how do you like a garland of such small voluminous stars? At the same time immediately and a master class.


From a paper strip folded many times, such figures can be cut out.


There is a wonderful idea to create jewelry from mittens and mittens.



To do this, use this template.


From this Christmas tree you can make a three-dimensional Christmas tree detail. To do this, translate the diagram and make cuts along straight lines. Then insert the parts into each other.


Now, as promised, there are a lot of patterns and stencils for cutting.







Garlands in kindergarten for the competition

Before the New Year, parents can receive a task from kindergarten and school. You need to make a craft for the competition. Often this idea is created in order to have something to decorate the Christmas tree. Well, we don’t mind, we’ll make a beautiful garland.

To do this, consider a few master classes.

So, the first idea, we make light bulbs.

To do this, we translate this scheme.


Using the ruler of the blunt side of the knife or scissors, we bend the sides of the petals.

Where there is an allowance, we apply glue and form the part. Insert the thread into the places where the dots are drawn.

Now we make a light bulb holder from dark cardboard. Fold and glue the strip.


Glue it to the light bulb. We make a lot of such blanks and combine them into one big garland.

By the way, you can insert real lanterns inside.

The second idea for the competition is volumetric balls.



This tutorial shows each step of creating elements.

The idea with deer seemed rather unusual to me.

Elements are cut according to this stencil.

The pieces are connected to each other with stripes of a contrasting color.

This idea is quite complex. It will be difficult for kids to do it. However, this decoration looks just gorgeous.

For beauty, you can use the gradient effect. Sort colored paper by saturation. From dark to light.

We cut many strips of the same width, form an ornament and fasten it with a stapler and staples.

This option is also quite bold. We will use felt and clothespins. Nothing complicated, but very unusual.

From different shades of felt, we cut out elements of the Christmas tree and glue them on a clothespin. We connect them with a strong thick thread.

I think that for the sake of the competition you can do your best!

Master classes from felt with patterns

Felt is very popular with craftswomen. I devoted a separate crafts from this material.

So, there will be both complex and easy crafts. Choose your own difficulty level.

So, the first master class. Volumetric ornaments. You will need a square of thin felt, a ruler, scissors and glue. You need to connect the edges alternately from different sides of the square.


To decorate a children's room, make a garland of mischievous Christmas trees and snowmen.


Templates are shown below. All animals are made according to this scheme: parts of 2 pieces are cut out according to the template. A mouth, eyes and other details are embroidered on the front side.

The edges are sewn together, but one corner remains unsewn. We push the filler into it. And this hole is sealed.


These templates can be used independently.

For garlands, flat figures made of felt are also used. It lends itself easily to stitching on a sewing machine. Therefore, more often these soft parts are connected in this way.


You can try to depict a garland in the form of leaves.

To do this, on a long strip of felt, you need to put off the ornament, which is shown in the lower diagram.

Cut the workpiece and connect all the parts into one long stretch.

Another master class on creating decorations for soft snowmen.


Recall that the garland can hang down from top to bottom.


Tilda dolls are popular in Europe. Especially in the Scandinavian countries. We can use this idea in home decoration.

Here is a master class on making a "sweet" garland. There are sweets and candy here. But you can’t eat them, they are made of fabric.



This is how candy is made.


And so we make a blank for a lollipop.



You can use real lollipop sticks.




Balls made of sisal, wadding or wool can also be wrapped in felt.


If you have only one shade, then it can be pasted over with a cloth or multi-colored paper.


Another decoration idea. And here we see clothespins again.

and here the figures alternate with pompons.


The diagrams for this craft are just below.




You can combine materials. Here's what the felt and cones look like together.


More decorating ideas.



Let's take a closer look at how such Christmas trees are made.




This, of course, is only a small part of the ideas. Experiment and create a new option for decor.

Decorations from plastic bottles and cups

This material is not very popular, but it is quite easy to use. Most often, plafonds for a garland are made from cups. It acquires a soft diffused light. And you can decorate them with eyes, hats and scarves.



Plastic bottles are often used to make snowflakes and other individual decorative elements. For example, rings like in this idea.


They can also be combined with lids. Holes for the thread in them can be made with a red-hot knitting needle or an awl.

Fabric flags

Flags can be different: square, triangular. Paper and soft. Glued or stitched. Today I will focus on the idea of ​​fabric. Because there are as many as three ways to connect elements.

Fasten the parts with ribbon or bias tape. For this you need a sewing machine. Otherwise, it won't be accurate.



The second option is to sew pockets for the cord.



The third option is to simply make slots into which the thread is inserted.



Well, for inspiration, the idea with burlap. Looks just awesome.


You think now you understand that there are no boundaries for creativity at all.

Cone Decoration Ideas

Of course, bumps! What did we not do with them! One is worth it. And we can make a garland just to spit.


For beauty, the material can be spray-painted or dipped in gouache and acrylic paint.

Natural material looks harmonious with eco-friendly ideas. For example with dried berries or fruits.



This material will also feel good on the street. It won't get wet like paper if it snows.

For decoration, take Christmas tree branches. You can attach them to the ceiling curtain or to the eaves.



As you can see, everything is very beautiful and very affordable. It is not at all necessary to buy expensive jewelry when there are such ideas under your nose.

Master class of garlands with fringes

A fringe garland looks quite stylish. It can be done in several ways. Let's consider everything in detail in the photo instructions.

Option two, from threads.


From fabric strips.


Corrugated or crepe paper.


Fast, but very personal. Try it and you will have designer things!

Streamers-decorations on the windows (ideas)

Let's take a look at how you can decorate window openings. After all, this is not only gluing paper protrusions. You can make children's fabulous garlands, or you can make adults and elegant ones.

Idea from flat circles of different sizes. Much like falling snow.

Or replace the paper with pom-poms.

Or even cut snowflakes.


Suspensions with real Christmas balls look beautiful.


Again we use different forms and heroes.



Even if the garland is small, then distribute its center exactly in the center of the window. It will look symmetrical and self-sufficient.

How to make a garland of snowflakes, diagrams inside

Let's touch on the idea of ​​snowflakes a little. This paraphernalia is very popular on New Year's holidays. After all, the beauty of snowflakes is fascinating, we all know that there is not a single identical beauty.


There are complex ideas, there are simple ones. It is important to understand who will make the craft - an adult or a child.





It is difficult to make many elements for a garland. You can make just a few elements and hang them on the chandelier, curtains for hours.

Mobiles are very similar to garlands, only they are arranged vertically instead of horizontally. Use this idea.

Garlands for the New Year from improvised means

What else can you make? yes from everything. From yarn we will make a stretch with hats. The main thing is to make them the same size. See how original this option looks.


From clothespins we make snowmen.

From the remains of wood and boards - houses.

From lace and PVA glue, ceiling lamps for an electric garland.




From cardboard and Christmas tree buttons. You can alternate them with pompoms.



Pampushki can be made with a fork, I show in the picture.


Use candies and other sweets. By the end of the holiday, only candy wrappers will remain hanging.



And here is the garland of gingerbread.


The idea of ​​​​citrus peel looks very modern. For flavor, you can add inflorescences of cloves or cinnamon sticks to them.





Love to knit? Then making a garland will not be difficult.


Crochet asterisk pattern.


Or create a knitted Christmas tree. The diagram is also attached.

Deer, snowflakes - this is all openwork knitting, which is easy to crochet.


Old CDs lying around? In crafts, do not throw them away!


We collected popsicle sticks, get them, put them into action.


Even from seemingly unnecessary remnants we make such beauty.


And here is a detailed master class for creating a garland of thread balls. This technique is very popular with craftswomen. Let's master it. By the way, PVA is the safest type of glue! Even children can work with it.



By the way, the kids will love this simple pasta idea.


Thank you for your attention! And I will be very glad if I could inspire you. I wish you success in your work and a good pre-holiday mood!

tweet

Tell VK

For it you will need glue, a strong thread, sparkles and paste (star-shaped pasta). Apply PVA glue to each part with a brush, then, taking another brush, apply silver or gold sparkles, you can alternate. Wait until everything is dry and carefully tie the paste to the rope at regular intervals, as shown in the photo.




Garland of pine cones

To make it look more spectacular and blend with your interior, the bumps can also be painted using acrylic paint. Pour some paint into a disposable plate and dip the bump on all sides (or use a brush). After the paint dries, the cones can be tied to a bright woolen thread in a contrasting shade, such as red.


Yarn tassels

If you are knitting and have unused balls of yarn, make a "woolen" garland out of them. The more magnificent and larger the brushes are, the more spectacular the finished thing will look.


Wool pom poms

Another option is to make woolen pompoms instead of tassels, or a combination of both. It is convenient to make small pompoms with a fork, winding wool around it.


Knitted garland

For her, you can use any old T-shirts, shirts or dresses. The rest of the tape will do. The main thing is that the fabrics are combined in color. Cut the fabric into strips of the same length and width and simply tie it on a coarse thread.

A charming garland can also be made from dry flowers and additional decorative details can be tied to it: paper birds, stars or Christmas trees.

ice garland

For a winter garden or outdoor courtyard, you can use ice garlands. To do this, take ice molds, pour water into them, add a few drops of paint to each mold and stir the paint in the water. Then cut a long piece of string and bury it in each mold. Put the molds in the freezer and wait until the garland freezes.

chain garland

This is the easiest option that we all know how to make from strips of paper since kindergarten. If you take double-sided paper with metallic, it will look more interesting.

Candy garland

Buy a bag of candy wrapped in cellophane wrappers and use a stapler to staple the candies together until you have a long chain.

Christmas trees made of paper

First, prepare a paper stencil, according to which you will need to cut the blanks in the shape of Christmas trees. To do this, you can use cardboard and old postcards. Glue the finished cardboard Christmas trees through at an equal distance with glue or secure with threads.

Snowball from cotton wool

Form lumps of different sizes from cosmetic cotton balls and fix them on the fishing line by threading them through a needle. To prevent the balls from moving, you will need a glue gun.

Gingerbread Cookie

If you are using cookie cutters, be sure to poke a few holes before putting the cookies in the oven. Making toys and garlands for the Christmas tree from ginger dough is a pleasure.

Vertical cones

Cut out cones from colored paper, it is better if it is dense and bright, glue and string on a thread. To keep the cone in place, you can glue it with a drop of glue from a heat gun or secure it with a small bead.

Buttons

And with such a mini-garland you can decorate indoor plants in the house.

7 232 836

From paper

A paper garland is quite simple to make, it can be made for a child's birthday or just decorate a room for any holiday. It is not difficult to make the brightest and most spectacular paper garlands - the instructions will help you cope in just a matter of minutes.

We make a garland of flowers with our own hands.

Stylized flowers


funny roses

Another paper flower garland - this time it's stylized roses. Making such a flower garland out of paper with your own hands is quite simple - draw it yourself by hand or print out templates for cutting, and circle them on any paper (by the way, you can use paper with a pattern).


Make a lot of roses - you need to cut a spiral, and then glue the original rose from it. When there are enough flowers, we string roses on a rope, and a do-it-yourself paper garland for a wedding or birthday is ready!


or you can cut a spiral with a wave, you get this flower:



Print Template:

From felt

It is very easy to make a garland with your own hands from felt.


For this we need:

  • colored felt (it is better to take pure shades);
  • lace, ribbon or braid;
  • sharp scissors;
  • sewing machine (or thread with a needle).
DIY felt garland is done like this:

If you already have a flat garland, and now you want to make voluminous New Year's garlands, then you will like a garland of butterflies.


Making this original Christmas tree garland is very, very simple:
  1. we cut blanks (you can use diagrams - you can download them for free, you can cut them by eye);
  2. we collect bow ties - we sew a large rectangle with a thread across, tighten it, tighten the knot and close it with a small jumper;
  3. we string butterflies on a thread or a beautiful lace, you can also use twine or ribbon for a garland;
  4. we straighten the butterflies - a garland for a wedding with our own hands is ready!

From hearts

Garlands of hearts look very impressive - they can be used for any holiday, you can make a decoration with your own hands for a wedding or just decorate an apartment or office for Valentine's Day.


How to make a heart garland using colored paper and a stapler:

You can make a one-color garland - for example, in red or pink tones, or you can use paper of several shades (by the way, double-sided colored paper for a printer is well suited).







There is another version of a do-it-yourself paper heart garland. We need colored paper, a cutting template (you can download and print it), a pencil (to transfer the template to paper), scissors and a sewing machine.



This DIY heart garland is done like this:

By the way, a garland of paper circles is made according to the same principle - circles of colored paper are folded in pairs and stitched. You can fold three or four blanks, then you get multi-colored balls of paper.



From checkboxes

A flag garland looks very elegant - it can have an inscription happy birthday, or welcome, and a garland of flags can be used at any party or children's holiday.


How to make a garland of flags for a children's birthday with your own hands? Three easy steps: Simple, isn't it?

For those who want a little more complexity, a garland of flags and fabric. So, we have already understood how to make a garland of flags with our own hands, but at what stage to add fabric and what kind? Again, it's simple.



It is clear that paper garlands are not very durable - they will endure a maximum of one or two uses, but what if you want to make something more durable? For example, for a kindergarten, you can make a flag garland of fabric.


How to sew a garland of flags in stages:
The decorative braid with flags made in this way can be used at home and in the garden, you can make a special decor for the street (especially kids like it for the new year).

For the new year

Making Christmas garlands is fun and exciting! To make a beautiful and original garland, you will need small candle lamps, narrow tinsel and a couple of cans of paint - special for glass or ordinary acrylic. Light bulbs are alternately dipped in paint and dried on a cardboard stand (the plinths can be wrapped with cling film so as not to get dirty). Then the bulbs are glued to the tinsel in a chaotic manner, and the unusual Christmas tree garland is ready!


Making another Christmas tree garland is also not too difficult - the main thing is to stock up on a template. For printing, you can use colored paper right away, or you can make one general template and copy it onto paper of any color. Printed or redrawn templates must be cut as shown in the diagram and strung on bright twine.

A garland of felt balls looks very cozy and very Christmas-like. You can do it with your child - you just need help. In order to make such an interior decoration, you will need felt balls. No, not even that - LOTS of felt balls.


Making them is quite simple - we take a little wool for felting in the palm of our hand, and wet it under the tap, and then lightly roll it into a ball. Add foam or soap, and continue to roll. When the ball begins to form, you need to make a little effort.

If the wool is acting up, try changing the temperature of the water several times - after a couple of changes from cold to hot water and back, the fibers begin to fall off. The future ball must be thoroughly washed from soap. The ball is ready when it becomes firm.

Make a lot of these balls - they can be of the same color (then it is better to take a contrasting thread for stringing) or different shades, and then just string them on a thread with a needle, and your cozy winter decor is ready. By the way, with such balls you can decorate a Christmas wreath on the door and a New Year tree.


Christmas tree patterns:



Well, I infected you with my needlework enthusiasm and you also want to make all kinds of garlands of flowers, felt balls, flags and other things? Then it's time to see what other decors are.

For example, you can make chic wedding garlands with your own hands.

How to sew a garland of artificial flowers in half an hour on a typewriter? There's an answer. By the way, if you want, you can make paper butterflies and alternate them with flowers.