Weaving leather for men: DIY bracelets with photos and videos. How to make a leather bracelet with your own hands: interesting ideas for topical jewelry

Such bracelets are good just in a set: make and wear several at once, from leather, fabric and beads of different colors.

You will need:

Flaps of different natural leather;

Multi-colored scraps of fabric;

Leather glue;

Beads, rhinestones for decoration;

Accessories for bracelets;

Dummy knife;

Metal ruler;

Scissors;

Pliers.

Sequence of work:

1. Use a knife and a ruler to cut the leather strips for the bracelets. Using scissors, cut the strips of fabric to a width just narrower than the strips of leather. Glue the fabric inside out to the skin's face. Secure with an iron.

2. Glue beads and rhinestones on the fabric.

3. It remains to make the fasteners. Attach the clips to the ends of the bracelets. Attach chains and clasps to the eyelets of the clips. Ready.

Photo and source: helloglow.co

2. Bracelet made of leather cord with a strip of beads: master class

How the bracelet turns out will depend on the choice of cord and beads. You can make the beading contrasting, as in this example, or match the beads in color - the result will be more restrained.

You will need:

Leather lace;

Threads in the color of the lace;

A thin needle for the skin or just a thin sharp needle;

Pendant or button for fastening;

Scissors.

Sequence of work:

1. Fold the lace in half. Thread the needle and start sewing the two ends of the lace while threading the beads between them. Leave a small open loop for the fastener.

2. Having made the bracelet to the desired length, cut one end of the cord, and on the other put on a button or pendant and sew the end of the cord. Ready.

Photo and source: fabyoubliss.com

3. Wide leather bracelet with an unusual clasp: master class

For such a bracelet, one large metal clasp or a smaller pair will do. Look in your inventory or go to a craft store: you will surely find something that will not only become the clasp of the bracelet, but also decorate it.

You will need:

Wide strip of leather;

Large metal clasp and fasteners for it;

Scissors;

Ruler;

Model knife and pad;

Leather glue.

Sequence of work:

1. Cut a strip of leather to the desired length and width so that there is enough to cover the inside of the folds. The folds will strengthen the edges of the bracelet where the clasp will be installed. Tuck the leather over and glue, wait for the glue to dry.

2. Install the clasp. Ready.

Photo and source: thinkcrafts.com

4. Thin bracelet in several turns made of leather and metal: master class

This jewelry looks like three bracelets, but in reality there is only one bracelet: it is put on in several turns. You can find fittings and metal tubes in craft stores.

You will need:

Leather lace;

Metal tubes for decoration;

Accessories (clips for the ends of the bracelet, chain, clasp);

Scissors;

Nippers;

Pliers.

Sequence of work:

1. Try on a lace on your arm, decide on the length of the bracelet and cut the lace.

2. Pass the string through all the tubes one by one.

3. Put the clips on the ends of the bracelet and secure.

3. Bite off the chain to the desired length. Attach the clasp to it. Ready!

Photo and source: juliettelaura.blogspot.com

5. Wide leather bracelet with adjustable length: master class

You can build a pattern for such a bracelet yourself or use a suitable plastic bracelet as a template.

You will need:

Scissors;

Buttons, hammer and fixture for their installation;

Hole punching device;

Paper, a pen, a centimeter for building a pattern or a ready-made plastic bracelet for a template.

Sequence of work:

1. Make a bracelet pattern or use a ready-made bracelet. Transfer the pattern to your leather and cut out the bracelet. A small leather fastener is also needed.

2. Install the button on the clasp and on the bracelet, as shown in the photo.

3. Make holes for length adjustment. Ready!

Photo and source: blog.cyeoms.com

6. "Ruffled" leather bracelet with beads: master class

It is quite simple to make such a decoration, and the result is amazing and unusual.

You will need:

A wide and long flap of not too thin skin;

Thin elastic band;

Several beads;

Device for punching holes in the skin;

Pen and ruler.

Sequence of work:

1. Draw a rectangle about 8x40 cm on the leather and cut out.

In this master class, we have collected the best bracelets that can be made from leather. They will help to complement the outfit and create a complete look.

Tools and materials Time: 1-2 hours Difficulty: 4/10

• artificial or natural leather;
• buttons, rivets;
• hole puncher;
• pliers;
• scissors;
• hammer.

Simple leather bracelet with an unusual shape

This simple leather bracelet, the master class of which we will show below, is done quickly enough, and the result will exceed all your expectations.

We need

1) A piece of leather

4) Hammer

Step-by-step master class

Step 1

Cut out the base for the bracelet

We had such a piece of skin from the very beginning:

Measuring the width of the wrist

Step 2

Cut out the base:

It was:

Became:

Before you cut the leather, you must have a complete understanding of what you want to get. We have got the basis of this form:

Step 3

Labeling buttons

Our base is ready:

Now we apply the blank to the hand and insert the pin in the place where we want to make the button

You need to stick the pin deep enough to make a mark on all layers. Be careful not to pierce your hand.

Pull out the pin, remove the bracelet, lay it out on a flat surface, stick the pins into the places with the holes.

There will be buttons in these places.

Step 4

Cooking buttons and tools

We take out our buttons and tools from the package.

For work, we need 4 types of buttons and for each of them, there must be its own nozzle

The black circle is needed in order not to damage the surface on which we will place the buttons.

A piece of the rod will be needed to insert the buttons

Step 5

Skin preparation

Now we will make holes for the buttons (if you have a hole punch, then everything will be much faster. Just punch holes in the places with the pins)

Pulling the pins

We put a black circle under the hole

Insert a piece of the rod, with the sharp end to the skin and beat it with a hammer

This is the hole you should get:

We do the same on the other side.

Step 6

Insert the top part of the button

Insert tools and materials:

We put on the nozzles on a plastic plate

Ready! The top is done.

Step 7

Insert the bottom of the button

Each part of the buttons needs its own tool. For the lower part, it is like this:

Putting the attachments on the plate

Now we carefully look at the pictures and insert the button in the same way. Do not confuse

Here's what happens:

The bracelet is almost ready

Step 8

We decorate the bracelet

To make the bracelet more interesting, let's add another button.

We put the button at the desired distance (about 1-1.5 cm) and press it against the bracelet to leave a mark

Punching a through hole with a pin

Repeat steps 5 and 6 and get a super cool bracelet

This is how it will look on the hand:

Don't be afraid to get creative with your choice of shape. Experiment!

Leather bracelets for men

Bracelet from an old belt

Sooner or later, the leather belt wears out. In order not to throw it away, we suggest you make a vintage bracelet.

We need:

• Old Leather Belt
• Hammer
• Nail
• Scissors
• Pencil

How to do:

1. Wrap the strap around the wrist 3 times
2. We put a mark at the end after the 3rd time
3. Cut off excess with scissors
4. Using a nail and a hammer, we make a hole so that the bracelet closes with a clasp

Everything! Just a few minutes and the bracelet is ready!

But no, here's another thing, such a bracelet can be made for a girl using her old belt

Creative bracelet with iron clasp

This creative leather bracelet is made quickly enough and is perfect for training the first steps in working with leather.

We need:

• Metal clasp (it is not necessary to use exactly the same as ours, any will do)
• Hole puncher
• Hammer or tool to insert buttons
• Rivets
• Scissors or dummy knife
• Ruler
• Varnish (optional)
• Glue (optional)

How to make a leather bracelet for men with an iron clasp?

Step 1

Cut out a strip of leather 5 cm larger than the wrist. The width should be 2 cm wider than the fastener. For this we use a knife or scissors.

Step 2

We fold over 2.5 cm of leather on each side (we cut off the excess, so we have a larger fold). You can stick it on, or you can leave it as it is

Step 3

We wrap the wrist, attach the clasp and put notes on the place of its attachment

Step 4

We punch holes with a hole punch (in extreme cases, you can use a knife) and insert rivets, hammering them with a hammer

* The main thing is to choose the required diameter of the rivets so that they are larger than the hole in the fastener

Step 5

We repeat the same on the other side.

Step 6

Optionally, the bracelet can be varnished

Leather wrist bracelets for women

For arrow lovers, we made such a bracelet.

We need:

• Old leather belt (must be thin to be cut with scissors)
• Chain
• Scissors
• Hole puncher

How to make a cute leather bracelet:

1) Cut 2 rectangles from the old belt

2) Cut out arrows from leather (we did not use a template, but you can draw it and cut it out of it)

3) We make 2 holes on the arrows: one in the front, the other in the back. For this we use a hole punch

4) Pull the chain through the holes

5) We wrap the chain around the wrist (if it is long, you can cut it with pliers)

We need:

• Buttons
• Button inserts
• Hammer
• Scissors
• Paints

How to make a colorful bracelet with patterns

1-2) Cut out strips of leather 2.5 - 5 cm larger than the wrist circumference. Our width is 1.5 cm, you can make any other

3) Apply the first layer of paint in the form of geometric patterns. Let it dry

4) Apply the second coat of paint

This bracelet will be a great gift for your girlfriends! Be sure to do it :)

Bracelet bow

We need:

• Piece of leather 22 x 10 cm
• Scissors
• Thread
• Buttons

How to do:

1) Cut out an oval piece of leather, measuring 22 cm x 10 cm (you may have another, depending on the width of the wrist)

2) Fold the leather in the middle as shown in the picture below

3) Around the fold, wrap with thread

4) Cut out a small piece of leather, approximately 4 cm x 1 cm

5) On top of the threads, glue a small leather rectangle

6) Using threads, sew buttons on opposite sides of the bracelet

Weaving leather bracelets

Bracelet weaving patterns

Now we can consider with an example how to weave a leather bracelet:

Bracelet with carabiner

We need:

• Leather or suede tape
• Scissors
• Pliers
• Clamping tool (not only specialized, but a simple clothespin will work too)
• 2 clamps
• 2 rings
• Carbine

How to do:

1) Cut off a piece of tape so that you can wrap your wrist 3-4 times (we cut it 4 times)

2) Cut off 2 more pieces of the same length

3) We lay out the laces in a straight line, put on a clip and fix with pliers

4) Using a clamping tool, we fix the laces and weave a pigtail (how to weave is up to you, everyone has their own method. You can see the main schemes just above)

5) With our unfinished bracelet we wrap the wrist, it should turn out 2 turns. We cut off the excess, leaving 1-1.5 cm

6) We put on the clip, as in the 3rd paragraph

7) Using our pliers, we put on the rings. We close one, leave the other ajar

8) Put on the carbine and close the ring

If you did everything right, you will get a braided leather bracelet like this.

True, we already have 2 of these on our hand :)

Do not be afraid to experiment: make the bracelet longer or make several of them, change the color of the skin or the type of weaving.

Several video tutorials on weaving bracelets

Why are these leather bracelets the best?

They are quite simple to perform. It took us more time to write the master class than the work itself.

They are durable. Bracelets made according to our MK will be worn for a very long time.

They are unisex. Although we have categorized the bracelets, in reality, they are all unisex. Even men's bracelets can be made of pink leather, then they will become women's :)

Similar materials

How to make leather weaving? How to quickly learn? How to become a master and give beauty to yourself and your loved ones? We will talk about this in the article. Fashion does not stand still. Very often in magazines, at fashion shows, leather dominates. Previously, leather products were reflected in clothing, but recently leather accessories are gaining popularity. Let's consider the basics of working with the material.

Needlework progress

The history of working with leather is quite interesting. They began to work with processing since the Stone Age, when clothes made of skins, belts, belts and bags gradually appeared.

Weaving is a variant of leather processing, where craftsmen combine several techniques to create a product. Often in jewelry practice, there are woven macrame elements made of lace.

What can you create from? It is easy to use unnecessary leather items. For example, gloves, briefcases, etc. But do not forget about the quality of the material. Pay particular attention to thickness, elasticity and coloration. It will be more difficult to work if there is a drawing or some kind of ornament on the product.

But the masters advise not to remake the old into the new. Better to spend money on new leather to make the accessory last longer and attractive. Each item has its own expiration date, so often unnecessary items can ruin the whole work. The leather is sold in specialized stores. I am glad that there are many colors and product options.

For beauty

It is easy to make bracelets with your own hands, which are becoming more and more popular. Such products look elegant and beautiful. It all depends on the weaving. You need to purchase pieces of leather, which will become the basis and cut them into strips. Crafting requires few materials and a lot of attention.

So, let's begin. Consider several weaving options that are suitable even for men. The first option is a pigtail bracelet.

It is thin, delicate and looks beautiful on the hand. This accessory is multifunctional because it can be worn at any time of the year.

We need a leather blank. If not, then cut a wide strip of leather, put buttons at the ends, as the diagram shows.

The style of decoration changes depending on the fittings.

The second option is "Women's Secrets". The accessory is suitable for bright summer outfits. You can choose the color yourself, at all the will of ideas. The technique is simple, even a child can handle it.

Take a thread of three colors, a strip of leather, some chains, a plug with a clasp, scissors and glue.

1. We cut the thread into 9 parts (20 cm in two pieces). We lay them out in three, after securing the edges.
2. We start to weave. Follow every movement to keep the product smooth and beautiful.
3. At the end, pay attention to the clasp. Secure the bracelet before trimming the ends. Glue the ends of the bracelet and clasp. The accessory is ready!

To make sure it works correctly, look at the photo:

The third option is an unusual braid.

1. To get a braided product, take three identical leather ribbons.
2. Remember the numbering of the stripes: 1-left, 2-in the middle, 3-right.
3. We start weaving. We pass the edge of the product through No. 2 and No. 3, lower it down. The stripes are twisted.
4. We pass the edge between No. 1 and 2, lowering it down.
5. We repeat the previous movements until the end of work on the product. We straighten.

The craftsmen divide the types of bracelets into categories. They vary in design.

1. Thin and thick accessories:

1. Accessory with buttons, clasps:

1. With patterns or rhinestones:

1. With multiple turns around the wrist:

In addition to the usual weaving, there is also a circular weaving. In addition to thin leather, you need a string. It is her that the cords entwine.

Progress:

1. There are four birch cords about 2 cm. Prepare a rope of the same length. Pay attention to the diameter - from 3 to 5 mm.
2. We glue (preferably "Moment") we glue the ends in a circle (along the length - 15-20 mm). We fix the gluing place with a thread.

1. We divide the cords into two parts. Memorize the left and right parts by mentally numbering. We take the left in the left hand, and the right in the right.
2. Let's use the schematic.

1. When the length is about 130-140 mm, then we will fix the end with a thread.
2. We glue and grease the non-braided ends. Leave to dry.
3. Flatten the ends of the tubes. Make room for the fixer, install.

Here's the result, which looks like a whip:

How to make leather weaving? How to quickly learn? How to become a master and give beauty to yourself and your loved ones? We will talk about this in the article. Fashion does not stand still. Very often in magazines, at fashion shows, leather dominates. Previously, leather products were reflected in clothing, but recently leather accessories are gaining popularity. Let's consider the basics of working with the material.

Needlework progress

The history of working with leather is quite interesting. They began to work with processing since the Stone Age, when clothes made of skins, belts, belts and bags gradually appeared.

Weaving is a variant of leather processing, where craftsmen combine several techniques to create a product. Often in jewelry practice, there are woven macrame elements made of lace.

What can you create from? It is easy to use unnecessary leather items. For example, gloves, briefcases, etc. But do not forget about the quality of the material. Pay particular attention to thickness, elasticity and coloration. It will be more difficult to work if there is a drawing or some kind of ornament on the product.

But the masters advise not to remake the old into the new. Better to spend money on new leather to make the accessory last longer and attractive. Each item has its own expiration date, so often unnecessary items can ruin the whole work. The leather is sold in specialized stores. I am glad that there are many colors and product options.

For beauty

It is easy to make bracelets with your own hands, which are becoming more and more popular. Such products look elegant and beautiful. It all depends on the weaving. You need to purchase pieces of leather, which will become the basis and cut them into strips. Crafting requires few materials and a lot of attention.

So, let's begin. Consider several weaving options that are suitable even for men. The first option is a pigtail bracelet.

It is thin, delicate and looks beautiful on the hand. This accessory is multifunctional because it can be worn at any time of the year.

We need a leather blank. If not, then cut a wide strip of leather, put buttons at the ends, as the diagram shows.

The style of decoration changes depending on the fittings.

The second option is "Women's Secrets". The accessory is suitable for bright summer outfits. You can choose the color yourself, at all the will of ideas. The technique is simple, even a child can handle it.

Take a thread of three colors, a strip of leather, some chains, a plug with a clasp, scissors and glue.

1. We cut the thread into 9 parts (20 cm in two pieces). We lay them out in three, after securing the edges.
2. We start to weave. Follow every movement to keep the product smooth and beautiful.
3. At the end, pay attention to the clasp. Secure the bracelet before trimming the ends. Glue the ends of the bracelet and clasp. The accessory is ready!

To make sure it works correctly, look at the photo:

The third option is an unusual braid.

1. To get a braided product, take three identical leather ribbons.
2. Remember the numbering of the stripes: 1-left, 2-in the middle, 3-right.
3. We start weaving. We pass the edge of the product through No. 2 and No. 3, lower it down. The stripes are twisted.
4. We pass the edge between No. 1 and 2, lowering it down.
5. We repeat the previous movements until the end of work on the product. We straighten.

The craftsmen divide the types of bracelets into categories. They vary in design.

1. Thin and thick accessories:

1. Accessory with buttons, clasps:

1. With patterns or rhinestones:

1. With multiple turns around the wrist:

In addition to the usual weaving, there is also a circular weaving. In addition to thin leather, you need a string. It is her that the cords entwine.

Progress:

1. There are four birch cords about 2 cm. Prepare a rope of the same length. Pay attention to the diameter - from 3 to 5 mm.
2. We glue (preferably "Moment") we glue the ends in a circle (along the length - 15-20 mm). We fix the gluing place with a thread.

1. We divide the cords into two parts. Memorize the left and right parts by mentally numbering. We take the left in the left hand, and the right in the right.
2. Let's use the schematic.

1. When the length is about 130-140 mm, then we will fix the end with a thread.
2. We glue and grease the non-braided ends. Leave to dry.
3. Flatten the ends of the tubes. Make room for the fixer, install.

Here's the result, which looks like a whip:

Leather bracelets are not eternal because they are made of delicate material. High-quality products are not always found in stores, so check its strength at the time of purchase, the presence of excess - threads. Of course, the leather belt also needs to be checked. Often they can curl up, dry off and lose their shape. It is dangerous to buy products from online stores, there is no way to check the quality and verify the authenticity of the brand. Try making your own accessory. It's easy to enjoy the business. But it is even more pleasant to wear a thing made by yourself.

Related videos

The creation of leather bracelets is reminiscent of something primitive - of the times when the first people invented jewelry. Now such jewelry is at the peak of its popularity, symbolizing freedom and non-recognition of the rules.

Try making leather bracelets with your own hands to subdue fashion trends.

Selection of materials

Craftsmen who create leather bracelets with their own hands know that each needlework pattern requires a certain type of material.

For example, if you want to create wide, symmetrical or asymmetrical bracelets with a minimum of jewelry, you will need thick, rough leather - saddlecloth and crust. Most often, men's bracelets are obtained from the saddle cloth.

If you need thin braided bracelets and baubles, choose soft leather ribbons, such as suede or yuft - they bend and sew well.

Make a wide blank, which you will decorate with a variety of ribbons and stones, from leatherette - it is soft and easy to process with needles and punches. In addition, leatherette is much cheaper than natural material.

Women's bracelets

In the past few years, world-famous designers have introduced fashion to leather bracelets. There was a queue in jewelry stores to buy leather bracelets from Chang Lu with natural stones, nuts and rivets.

But handmade jewelry is in no way inferior to the originals! Try it, it's very simple.

Leather bracelet with beads

The jewelry consists of several suede strands, bracelet clasps with flat clips and beads with holes of such a diameter through which your laces will stretch.

• Prepare the required number of lace cuts, equal in length to the size of your wrist + stock for knots.

• Pinch one side of the laces with the clasp clip.

• On one of the threads, start stringing beads with your own hands, securing them with knots on both sides. Do the same for all the other threads.

• After completing the process, secure the loose ends of the laces with the clip of the other fastener.

Your bracelet is ready! To diversify the look of the jewelry, use several types of beads, alternating them on threads or putting each new type on a new lace.

Braided bracelet with chain

Not only can these leather bracelets be worn with casual wear, but also worn for special occasions due to their sparkling appearance. Beaded bracelets, which are also versatile in wearing, are woven in a similar way.

In the process, you will need the bracelet clasps with ring fasteners, 1 long piece of suede tape, and 1 thin gold chain.

• Pass the ribbon and chain through the ring of the first part of the clasp. Arrange them so that you have 2 leather side laces and a double chain in the middle.

• Start doing a regular three-strand braid with your own hands.

• After completing braiding, secure the bracelet pieces to the ring of the second clasp.

Now you can put on your leather bracelet. You can thicken such bracelets by fastening several such weaves together at once.

To learn how to weave popular Jang Lu leather bracelets with your own hands, check out the following video tutorial.

When creating such bracelets with your own hands, round or faceted natural stones are used. They can be easily replaced with cheaper plastic beads that look similar to turquoise, coral or pearls.

All women's leather bracelets can be worn with sports, casual, safari and nautical styles, that is, with clothes for nature, walks and relaxation in neutral colors, similar to the skin color on the bracelet.

Bracelets for men

Men's leather bracelets are distinguished by their simplicity and conciseness compared to women's. Often, rivets, thorns or weaves become the maximum decoration of such jewelry.

Now you will try to make a braided men's leather bracelet with your own hands. When working, you will need a piece of leather that is 5 centimeters wide and about 20 centimeters long.

• Draw a pattern on the back of the leather. The length of the bracelet must be at least 19 centimeters. In the middle, make 2 cuts that do not reach the edges by 1.5-2 centimeters.

• Lay the workpiece vertically and mentally or use an eraser pencil to number the cords from one to three. Slide the bottom edge of the bracelet between cords 2 and 3.

• Straighten the cords as the weave moves. Continue to weave in the following order: the first cord with the second, the third with the first, the second with the third.

• Bring the bottom of the workpiece with your own hands forward between the third and second cords.

• Straighten the cords again so that the lines descend to the bottom of the workpiece in the correct order - the first, second, third cord.

• Repeat steps two through four. You should have a finished braid.

• Shape the edges of the bracelet and poke holes with an awl.

• Set the bracelet aside. For fastening, glue a few pieces of leather together and leave to dry for a day. When the workpiece is dry, round off the edges, make a hole in the middle and smooth the unevenness with sandpaper.

• Pass a thin leather cord through the holes in the bracelet. Pull both of its edges through the resulting leather nut. Tie the edges of the lace in knots.

Weaving is quite simple to perform, so you will be able to master it the first time.

The jewelry will be a welcome gift for your man. These bracelets will fit perfectly into casual street style. High-quality work will suit even classic-style suits if you are heading for an informal meeting. But at a gala event it is better to appear without a bracelet.

Children's bracelets

Children love to imitate adults by decorating themselves and putting on their parental clothes. Make your little fashionista or fashionista DIY leather bracelets that will attract a child with a bright design. Such bracelets will be able to compete in popularity even with well-known elastic bracelets.

You will need a long thin leather cord and bright floss threads. This decoration is universal - depending on the thread colors you choose, it can be presented to both girls and boys.

• Loosely wrap the bracelet around your wrist 2 times and add binding allowances. Cut to length to measure.

• Secure the cord with tape. At a distance of about 5 centimeters, drip glue and attach the first color to the floss. Start wrapping the thread tightly around the cord until you reach the distance you want. Put on a drop of glue again and secure this thread.

• Start wrapping around the bracelet with a different color of thread. Continue alternating colors until you've braided about 5 centimeters of the bracelet. Secure the last color of the floss with a needle and glue.

• Knot the rest of the cord around the other end of the cord. The knot must be strong, but the cord must pass freely through it.

• Repeat the previous steps on the other side of the cord and tie the cord again.

To make it easier for you to make tight knots on the leather thread, wet it with warm water and remember well to soften and give elasticity.

Kids will easily wear such jewelry to kindergarten, school or for a walk. And thanks to the bright design, the bracelets will go well with any everyday children's clothing. But it's better not to wear them with smart dresses and formal suits.