Good to know 

We create an elegant crown out of cardboard and paper: how to make an exquisite accessory for a child with your own hands. How to make a cardboard crown? Needlework lessons for dads and moms

Something has been stretched lately into crowns ... Today we are making two more crowns, this time crowns for the king and queen.

If we made the crown of the Russian Empire from a plastic bottle and polyethylene foam, then a thick cardboard 2-3 mm thick was prepared for the royal crown, which can be bent without leaving creases.

Royal crown in finished form looks like this:

Crown pattern, about 58 head size:

Of course, the teeth of the crown can be drawn in any shape you like.
First, we cut out the crown from the Whatman paper, try it on, and correct the height of the crown.

Cut out the blank of the cardboard from the crown. We glue in an overlap (did you forget about the glue allowance?).

We are preparing a glue gun with a large supply of rods, various ribbons, cords. The color of the braid does not matter - everything will be painted gold. We glue the cords and braid on the crown with a glue gun (or universal glue "Moment-crystal") as your fantasy tells you

We glue all sorts of different beads, pendants, buttons, brooches - everything that is at hand. It is desirable that the beads are assembled on a string, so it is safer than gluing one at a time.

When the decorative fantasy dries up, you can paint the crown. First, we prime, then paint with gold. I previously painted it with black spray paint, tk. I wanted to give the crown a certain antiquity. It can be primed with white paint - then the gold on the crown will appear especially brightly.

Don't be alarmed that this photo has a different crown. This is the crown of the queen, which will be discussed later. The principle is the same.

Now paint with gold spray paint.

Without further ado, I decorated this crown with acrylic rhinestones on an adhesive basis.

The crown is ready for the king. Oops! I almost forgot to show the inside of the crown.

I really like this seamy side: the rivets are just like real ones. But they turned out not from a good life: when I bent the cardboard blank of the crown into a ring, my cardboard gave the same hall in one place. I strengthened this hall by gluing a piece of cardboard on the inside of the crown. At the same time, of course, I had to stick them around the entire perimeter of the crown evenly. Then, with a glue gun, you need to quickly and quickly set points on these inserts, and then even faster (until the glue has cooled down) with something sharp, such as a thin screwdriver or the tip of a knife, push the points in the middle. This is how the forged rivets on the crown turned out.
At the bottom, on the inside of the crown, I have a soft part of the Velcro tape glued to it so that the crown does not crawl over my head.

Now about the crown for the queen.

The following shape of the crown was taken as a basis:

The process of making this crown is no different from the making of a royal crown. But in the decoration of the crown for the queen, more expensive rhinestones, pearls and glutinous semi-pearls, sequins were used. There are 5 pentagons on the crown, highlighted with a glued cord. Between the pentagons, the horizontal reliefs are "drawn" with a glue gun.

Finished crown for the queen:

Good luck to all in your work!

Every girl wants to be a princess. Making a beautiful and original paper crown will take a lot of effort, since every little princess wants to be irresistible. In addition, such a crown can be used as part of a snowflake or butterfly outfit, which are popular at children's matinees. From this material you will learn how to make a crown out of paper.

Crown made by cleaving method

The first thing you need to do is draw the outline of the paper crown. This is necessary in order to imagine what details will be needed. Our crown will consist of blue, purple and white paper. In the process of making it, you will use a clerical knife, glue and a toothpick. The paper should be cut into strips 21 cm long and 5 mm wide.

At the base of the crown are white and purple circles and diamonds (24 pieces each). In the first row, there are round blanks fastened with glue. In the second row, there are diamonds that are glued between the circles.

The third row is made of multi-colored circles glued between the rhombuses.

To make a snowflake, you will need to use blanks that resemble a drop and the same rhombuses. You will need blue and purple drops (six of each) and white diamonds (seven).

Now you need to do a good job of gluing the snowflake to the base of the crown, and then diversify the composition with the help of white and purple rhombuses and droplets. For a more magnificent look, we decorate the crown with blue rhombuses on top.

And at the final stage, the crown should be turned over, thoroughly smeared with glue and left for a day to dry. After the crown is dry, you can spray on it with regular hair setting spray to make the structure more durable. That's all, you have made a piece of jewelry that a real princess deserves!

If everything is not entirely clear with the quilling technique, it is recommended to watch this video:

How to make a crown for the little prince out of paper?

Who Said The Crown Is For Girls? The boy also wants to feel like a king or a prince. Let's take a look at how to make a crown for your sons and grandchildren from colored paper pieces.

The crown is made according to the size of the little prince's head. Finally, you just need to glue the first and last workpieces. The crown is complete!

How to make a crown out of paper video

Making a crown for room decor

Little princesses and princes, in addition to looking like real representatives of the royal family, of course, want their surroundings to correspond to the royal canons. To make kids 'wishes come true, make a paper crown to act as a decorative element in the kids' room. To make such a decor element, you will have to use a printed paper crown template, colored paper, decorations (braid, leaves, flowers), glue, scissors and tape.

First, you need to take a crown template and print it using a printer. If you cannot use a printer, then just attach a piece of paper to the monitor and redraw.

Now let's move on to making the back side of the workpiece. To carry out these actions, you need to trace the outline of the crown on thick paper and cut it out.

On the reverse side, double-sided tape is attached (any stationery store contains these products), or a ribbon is glued, which will serve to hang the crown on the wall.

Next, we move on to making the front side of the crown. You should attach a beautiful scrap paper to the template, cut out the silhouette and glue it. Now we fix the decor elements, here you can use ribbons, flowers. Children will be delighted if the crown is adorned with their name so that each of the guests knows who owns the room.

Well, that's all, now you know how to make any type of crown out of paper. It remains only to apply this knowledge in practice to give your children a sea of ​​fun, joy and truly royal mood.

Before the onset of all kinds of matinees in schools and kindergartens, many parents are puzzled by the manufacture of suitable costumes and accessories for children. Of course, now there are a lot of such things on sale, but not everyone wants to buy them for two reasons. The first is the high cost of the purchase, and the second is the desire to have an original outfit that should be unique and in a single copy. Therefore, most mothers and grandmothers have to invent and sew the necessary clothes on their own.

Royal majesty

Sometimes many parents have problems with making additional accessories for New Year's costumes for children. Most often, they do not know how to make a crown for a princess with their own hands. And this attribute, by the way, is of great importance for the full-fledged image of the fairytale heroine. Therefore, a poor-quality craft that has a clumsy appearance can ruin the whole look, even despite the beauty and chic of the dress.

You can achieve the desired result and give such a craft a beautiful look and royal grandeur by choosing high-quality materials for its manufacture. But the material chosen does not have to be expensive, since you can make a crown for a princess from improvised items.

Little beauty

Starting to make a craft with their own hands and not knowing how to make a crown for a princess correctly, some people make the same mistake when they try to mold it to a very large one. In fact, such a thing should be small, but at the same time very bright and visible.

The princess crown should not be confused with crafts for the king and queen, so all its lines and shape must be refined and curved. To achieve this result, various tools are most often used that allow bending the prongs of the product so that they look like the petals of a lily. A ready-made exquisite crown for a princess, made by hand, needs additional fasteners to the child's head, since it will not hold on on its own. Therefore, it will be possible to attach it with a thin transparent elastic band or invisibility.

Second life of old things

Speaking about the material from which a crown for a princess should be made with your own hands, it can be argued that most of the things that are available in every house are suitable for these purposes. Plastic bottles, cardboard, copper wire, fabric and other products can be excellent blanks for future crafts.

When choosing the right materials, so that a handmade crown for a princess is safe for a child, some nuances should be taken into account. This means that in no case should you use sharp, sharp or glass objects to create a blank and decorate a craft. It is also unacceptable to use toxic paints or varnishes.

Easy solution

The easiest and fastest way to make a craft for a child, a fabulous crown, is considered to be its invention made of cardboard. But it is only better to take not a simple cardboard, but a special, metallized one, which will not need to be additionally painted. Moreover, in such a material, all colors are very saturated and shiny, and it is not always possible to achieve a similar result by coloring other similar blanks.

Consider how a princess crown is made from cardboard of a similar sample, in stages:

  1. Draw an unfolded crown on a golden sheet of cardboard on the inside. The number of teeth should be no more than 5-7 pcs. They should be as sharp as possible and not exceed 10 cm in height.The length of the unfolded crown can vary from 10 to 15 cm.
  2. Cut out the image of the craft and roll it up, connect the joints with glue or pieces of tape, but you only need to do this so that there are no gaps between the edges.
  3. For homemade decor, you need to prepare stickers with pebbles of different shapes, as well as sparkles and pieces of chopped multi-colored rain.
  4. Before decorating the product, it is necessary to slightly bend the teeth of the crown. To do this, it is best to use a pencil, which, pressing with your fingers, must be placed against the edge of each clove and, having wound it, gently tug.
  5. All edges of the finished product should be smeared with glue using a brush, and then covered with sparkles and chopped rain.
  6. Stick the stickers with pebbles in a chaotic manner.

Plastic miracle

Also, a crown for a princess with your own hands can be made from a simple plastic bottle. The size of the future craft can be adjusted by using bottles of different sizes. An example of making one of the types of such an accessory will be considered below.

  1. Take a straight plastic bottle of a suitable size and draw a crown in its center in a circle. Draw the number of teeth and the distance between them so that the product looks harmonious.
  2. Cut out the pattern very carefully so as not to damage the material. Thus, we got a blank that does not need to be glued.
  3. Next, you need to paint the homemade product with golden paint on both sides.
  4. After the paint has dried, start decorating the product, for which use stickers with pebbles and small pearl beads.

To do such a thing, you don't even need a crown template for a princess, which is often the case in similar cases. Also, it takes very little time and effort to make it completely, so every child can independently make such a miracle and go to the ball in it.

A handmade paper crown can serve not only as an addition to your child's fancy dress, it can also be used in everyday games, or as a gift to guests who have come to your child's birthday. And if you make cardboard blanks in advance and distribute colorful felt-tip pens to the guests, then everyone can make a crown to their liking and take it with them as a souvenir.

Lesson number 1

  • crown pattern ();
  • vintage paper (pages from an old book, sheet music, etc. will do);
  • spray glue and PVA;
  • stationery knife;
  • brush;
  • sequins;
  • various decorative ornaments - buttons, pearls, ribbons, etc .;
  • hot glue gun.

1: Print the outline of the crown on thick paper and cut out the template. Lubricate with glue.

2: Glue the vintage paper on top. If you are using small pieces of decorative paper, overlap them. Glue the corners and joints with glue stick.

3: Flip the shape over and cut off the raised edges of the decorative paper.

4: Now glue the other side of the template in the same way.

5: Glue decorative tape (such as velvet or corduroy) along the bottom edge. Decorate the top with sparkles. To do this, grease the edge with glue and sprinkle with sparkles. After the glue is dry, brush off any loose glitter with a dry soft brush.

6: Using a hot glue gun, glue both ends of the workpiece. After that, decorate it with buttons, beads. Make a fan out of colored paper and glue it onto the crown. Here's what we got:

Master class number 2

And now we will offer you several models at once, the main thing is to understand the principle of operation, and then you can come up with a wide variety of options for the crown. To work you will need:

  • cardboard (it is better to use not very dense);
  • hot glue gun;
  • elastic;
  • decorative items (braid, beads, etc.) or paints and colored markers.

Draw or print the template (), cut along the outline. Glue a cardboard "strap" along the bottom edge, after making shallow cuts on it, so that the cardboard bends better. The length of the "strap" should correspond to the circumference of the child's head. Make two holes at the ends and secure the crown with an elastic band or tape.

Use paints or colored markers to decorate.

Lesson # 3: the golden crown

This is a more difficult job. You will need:

  • scissors;
  • paper;
  • PVA glue.

1: Cut a sheet of paper into 5 x 5 cm squares. The more squares you cut, the better. Fold each square in half diagonally and smooth out the crease well.

3: Grease one of the bottom corners of the triangle with glue and paste it into the other triangle. Please note that the adhesive must only be applied from one (front) side.

4: Thus, make a "garland" of triangles. Remember to apply it to your child's head from time to time to determine when you will reach the desired length.

5: Take another triangle and grease both ends with glue. Open the crown and glue the triangle so that it is located between two adjacent triangles. Fill in all the other "gaps" in the same way. Then carefully smooth out the folds.

6: Now fold the crown into a ring and try on. Use a pencil to mark where the two ends of the piece are attached. Apply a little glue to one end, then tuck it into the other end and press down.

The crown is ready! Smooth it slightly with your fingers so that the ring is rolled evenly.

Step by step lesson number 4

Another original crown pattern (). You will need:

  • thick colored paper (square sheet 30 x 30 cm);
  • cardboard and compasses;
  • scissors and / or utility knife;
  • glue.

1: Cut a square piece of paper in half to make two sheets, each 15 x 30 cm.

2: Cut out a circle of cardboard about 11.5 cm in diameter (use scissors or a utility knife).

3: Applying the template to the top edge of the colored paper rectangle (long side), draw a wavy line. Cut the sheet along the outline, and then repeat the same with the second part.

4: Glue both pieces together on one side. Glue strips of colored paper along the lower edge of the crown, sew along the upper edge with a decorative stitch.

5: Cut out pictures of a cake with candles out of multi-colored paper and glue them. Make a flame out of small beads.

6: For each "wave" along the top edge, cut 2 circles with a diameter of 5 cm, attach them to the top of the "wave" on the front and back sides and sew with a decorative stitch.

7: Measure the circumference of the baby's head and fold the crown into a ring. Cut off the excess length and glue both ends together.

A crown made of cardboard, paper is the most popular craft for children, both for girls and boys. Consider how to make a crown with your own hands from paper, cardboard, wire or lace.

For a role in various performances, you may need a crown. So, let's look at several options for how you can complement the girl's festive outfit in the form of a crown.

How to make a cardboard crown with your own hands

To solve this problem, we need:

  • scissors;
  • cardboard;
  • foil;
  • pencil;
  • glue.

Small cardboard crown

1. In order for the crown to sit well on the head, you need to measure the circumference of the baby's head. Note that the crown will need to be fastened - so measure a few centimeters more. Having chosen a certain length, cut out strips of cardboard.

2. The height of the crown depends on your preference. On the top of the cardboard strip, it will be necessary to draw the "teeth" of our crown, and then cut off the excess parts strictly along the contour. Our next action will be to unwind the foil roll to the length of our crown. Now you should spread glue on one side of the cardboard. You need to attach this side to the foil with "teeth" to the edges. Next, you should step back from the crown a few centimeters, and cut off the foil.

Crown made of cardboard and beads

3. The part of the foil that remains - it should be tucked along the cardboard and glued to the other side. Give the crown time to dry. Then cut through the foil between the teeth, and wrap the foil around each tooth. At the end, you just need to connect our strip in a circle.

Another option is how to make a cardboard crown. Take cardboard, stapler, pencil and scissors. On cardboard, draw a crown with classic teeth. Cut, join in a circle. To make the crown more dense, you can connect several layers of cardboard with a stapler. The crown can be decorated with beads, sparkles, rhinestones, pasted over with tinsel, wrapped in foil. You can glue colored rain along the contour of the crown.

Paper crown

How to make a crown out of paper? First, you should draw a diagram of the crown on paper - this will be required in order to understand how many details we need.

We will need:

  • stationery knife;
  • white paper;
  • red and gold colors;
  • glue.

1. Now you should cut the sheets of paper into strips that will have a width equal to seven millimeters and a length equal to twenty-five centimeters.

2. To make the base of the crown, you need to make twenty rhombuses and twenty circles from strips of red and white colors. How to make the first row of the crown? You just need to glue the resulting circles together. What will the second row look like? These will be rhombuses that should be glued between the circles. All subsequent rows are alternating. Remember to alternate colors.

3.
 Now we are going to make a snowflake that will decorate our crown. We need blanks made in the form of drops and in the form of rhombuses - eight white rhombuses, seven gold and seven red drops. Glue the snowflake well to the base of our crown. Be sure to complement the crown with drops and rhombuses of white and red colors.

4. To make the crown more magnificent - at the top of the crown, add gold rhombuses - glue the strips twenty-five centimeters long together. Be sure to leave it overnight to dry the crown.

How to make a wire crown

Asking the question: how to make a crown - you can use a variety of methods and materials to make it. Let's consider the most popular ones.

Wire crown

For example, wire and beads can be used to create an exquisite crown.

You will need:

  • pliers;
  • wire;
  • glue;
  • beads.

Using pliers, you need to bend a frame from a thick white wire, which should then be wrapped in a silvery rain. You can choose any shape for the crown frame. But the size of the frame should correspond to the size of the baby's head. It should be said that this activity is not easy and takes a lot of time.

Crown for the snow queen

How to make a crown for the snow queen?

You will need:

  • copper wire - it must be very thin and of medium thickness;
  • pliers;
  • beads of various shades;
  • ruler.

Take a ruler and measure how large the teeth on the crown will be. Cut the wire twenty-five centimeters long. In order for the frame of the crown to be strong, you need to make it from wire folded three times, and do not forget to scroll another layer of wire on top. We now have a large wire ring. Divide the made frame into eight equal parts. Select the locations on the wire where you will attach the base of the prongs. Beads must be attached to the peaks of the crown. Large beads are suitable for this task. They can also be fixed with a wire - the wire is threaded through the bead and fixed at the peak.

Lace crown

We will need:

  • lace ribbon with rounded curly or scalloped edges. We select the length according to the size of the head circumference, plus a few centimeters in order to fasten it in a circle or for a Velcro fastener;
  • starch or a special spray to make the crown tough;
  • acrylic paint;
  • scissors;
  • needle;
  • threads;
  • glue "Moment";
  • brush;
  • glass jar (three-liter);
  • decor (beads, stones, beads).

1. Cut the lace to the desired length and then fold it into a circle. We sew very carefully so that the threads are not visible. After that, we strongly starch our entire product. We straighten the resulting crown and put it on a glass jar. Let it dry.

2. After everything has dried, we begin to paint it with a brush. The paint can be applied only to the edges of the crown or to the entire surface.

3. When the paint is dry, use glue to fix the beads, pebbles or beads on the crown.

SELECTION OF IDEAS

Crown made of paper and cardboard



Wire crown


Lace crown