If we are talking about gold jewelry, then a warm soapy solution will come to the rescue. Only, in this case, make sure that the soap or shampoo you are using is low alkaline and not abrasive, as such products can make the diamonds dull and dark.

Take a soft cloth and, having dipped the product in water, clean the jewelry with it. To enhance the effect, soak it in soapy water for a while.

3. Diamond care: high temperature

A very important point: diamond jewelry is afraid of high temperatures ... Do not clean them in hot water or dry them with a hot air dryer.

It is also not advisable to wear a diamond ring or other jewelry with these stones when it is very hot outside. Also, be careful not to stay in direct sunlight at home, such as on a window.

If you do not adhere to this rule, then your beautiful diamond will turn into an unsightly whitish pebble, and it will be difficult to believe that it is a real diamond.

4. Tools for cleaning diamonds

In addition to soapy water, excellent helpers for those who do not know how to clean diamond jewelry, will become, alcohol, diluted with water or a weak solution of ammonia. To clean a diamond ring this way, you just need to dip it in one of the above solutions for a few seconds and then wipe it with a cotton swab.

At the end of the procedure, do not forget to rub the stone until it shines with a piece of velvet cloth.

5. A visit to the jeweler

No matter how convenient it is for you to care for diamonds at home, you just need to show them to a specialist every six months.

This is necessary so that the jeweler checks the jewelry for damage and scratches, makes an ultrasonic bath (which removes all dirt and microbes), and also strengthens or polishes the product, if required.

Important to know: how to clean gold with diamonds

When you think about how to clean diamond jewelry, you need to remember the list of funds that for this NOT suitable :

Soda.
Unlike silver, which is often cleaned with baking soda, baking soda can only worsen the appearance of a gold piece. It can become dull, lose shine and become dull.

Vinegar, hydrogen peroxide, potassium permanganate.
These products help oxidize the gold and tarnish the diamond itself.

Iodine.
Gold can change color, and it can only be returned by re-polishing.

Chlorine.
This agent acts on gold radically and discolours it.

Household detergents and cleaning products.
They contain a high percentage of alkaline and abrasive materials that make gold dull and diamonds whitish. © Anastasia Kuleshova

Gold rings, and any other gold items need cleaning. Initially, it is important to determine what kind of contamination is on the gold ring. Of course, men's wedding underwear needs to be cleaned more often, since it is the man who sometimes works in dusty and dirty conditions.
Choosing gold rings with diamonds and making a purchase in an online store in Kiev or a jewelry salon, you probably received advice from a seller on the care of jewelry. Original rings made of gold and especially white gold can be bought both as a wedding ring and for engagement. It is best if even a small gold ring is decorated with a diamond, which is sometimes called "the best friend of girls." Gold rings with diamonds are also suitable as a wedding attribute, they will act as beautiful wedding rings. If you donate such a ring made of gold while dragging, then be sure that the refusal of the lady of the heart will be excluded.

How to care for your rings? If the dirt is not very strong, you can easily remove it with ordinary soapy water. In addition, you can clean a ring made of red, yellow, white gold, with engraving, any pattern, and other decors from stuck dust with the help of a soap solution.

But often on wedding rings made of gold with diamonds, dirt appears due to the oxidation of the metal, which is necessarily included in the alloy of the product. At its core, gold is a relatively soft metal, and in the production of jewelry, an alloy with other well-known high-quality metals is often used.

Often in gold jewelry, especially with diamonds, for example, copper is used as a component of a gold alloy. When exposed to moisture in the air or oxygen, copper oxidizes, as a result of which black and green spots can appear on the surface of the jewelry, which you can remove in consultation with a jeweler.

In order to avoid scratches and unwanted deformation of gold jewelry, remove jewelry during household work, as often detergents contain alkali, chlorine, iodine, and other chemicals can have a negative effect on gold rings.

Also remove jewelry, especially if it is with a diamond, when using some ointments or whitening hand creams, as these can also detrimentally affect the appearance of the ring. Sweat can also oxidize copper, causing the garment to darken.

Perhaps the easiest way is to give the ring to a jeweler for cleaning in an "ultrasonic bath" using special cleaning solutions. As a rule, along with this procedure, the master polishes the stone and checks whether it is firmly fixed in the frame. But this method is not suitable for all diamonds, as they are exposed to high-frequency vibrations in the process. If the clarity of a diamond is below group 8 - I according to the American clarity system (for small diamonds below 6), then the diamond most likely has a crack, which can increase in size under the influence of vibrations.

In order not to constantly contact jewelers, cleaning can be done at home. You can remove grease (oh, how diamonds do attract grease!) From a diamond ring by placing the jewelry in warm water and detergent and brushing it with a soft toothbrush.

I still remember how many years ago I turned to Tiffany & Co, my ring was bathed in warm water with Fairy cleaning agent, and it sparkled like new!

To degrease the surface of the diamond, it can be wiped with ethyl alcohol. In this case, it is important to process not only the visible side of the stone, but also the one adjacent to the frame and under the stone (if you can get it). To less frequently resort to cleansing procedures, of course, it is worth remembering the rules for storing your jewelry:

1. Do not store all diamond jewelry together. Despite their hardness, they can scratch each other.

2. Clean your diamond jewelry regularly because dirt build-up under the setting can cause the stones to loosen.

4. Never wash the dishes in the engagement ring, dirt will collect on the diamond and it will be covered with a grease film.

So your wedding took place ... Of course, photos and videos, interesting, pleasant memories were left from the solemn event. Plus, you've started wearing wedding rings as a symbol of the wedding. In order for the rings to please with their beautiful appearance throughout their life, special care is required. You can follow certain guidelines.

Care of gold rings.

You must be prepared for various unpleasant situations. For example, you can accidentally drop a small amount of iodine on a gold ring, after which a stain will immediately appear. In this case, it is recommended to use a special solution: 1 glass, 1 teaspoon of baking soda. In this soda solution, you need to place the ring, waiting 15 minutes. Then the product must be rinsed with cold water. To wipe dry, it is recommended to use a soft cloth to prevent scratches.

Unfortunately, your gold ring has lost its original luster? In this case, rinse it out using a soft bristled toothbrush and a soap solution with 1/2 teaspoon of ammonia. Then the ring must be rinsed with warm water and wiped off.

In some situations, darkening can be caused by prolonged contact of the wedding ring with moisture. However, this nuisance can be successfully dealt with. Try to rub the wedding ring thoroughly with suede or velvet.

Have you preferred a gold plated ring? This means that in this case, you need to successfully get rid of dirt using ethyl alcohol or turpentine. You should take the liquid, apply it to a cotton swab and wipe the product thoroughly. The dirt will be removed very soon.

Silver wedding rings care.

You should be prepared for the fact that silver jewelry gradually loses its original shine. To restore the beautiful appearance of the jewelry, you need to use liquid soap. Then you need to hold the ring in a special solution: 10 grams of soda with 1/4 tablespoon of boiled water. After 10 minutes, the ring can be wiped dry with a soft cloth. Admire the symbol of your marriage!

What if the spots that appear are too dark? Use a flannel cloth, baking soda, or toothpaste to remove them. At the end of the procedure, the ring should be rinsed with warm water.

Caring for wedding rings, which are decorated with natural stones.

The inserts made of natural stones suggest a special approach to cleaning wedding rings. You will need to exercise the utmost care to freshen up your look and at the same time prevent negative effects on your jewelry.

For example, improper cleaning can lead to clouding of pearls. In order to refresh the state of pearls, you will need a soapy solution, but at the same time it should be of a weak consistency and have a warm temperature. In a soapy solution, you need to wash the ring with pearls, and then rinse in ordinary warm water and dry.

How can you remove dirt from pearls? A little potato starch can be applied to the stone. After a couple of minutes, wipe off the pearls using a soft cloth.

If you wear the ring frequently, oil may start to build up on the pearls. However, in this case, purification is also possible. Use a linen cloth and salt to remove grease. Put the pearls in a napkin and add 0.5 tablespoons of salt. Then you need to put the napkin in the tray, where you will rinse it in this form for 5 minutes. Then it is recommended to dry the wedding ring.

Use a flannel napkin to store pearls. In addition, it is recommended to store the jewelry separately. Once a month, the jewelry should be wiped with a velvety cloth.

Turquoise is one of the most fragile stones, as it has a porous structure. At the same time, her care can be successfully carried out. Despite the fact that turquoise quickly absorbs grease and the smell of cosmetics, after which it acquires a greenish tint, its beauty can be preserved for a long time. The best solution is to use animal fat, but vegetable oil cannot be used. Animal fat should be applied to turquoise, and then thoroughly rubbed. As a result, you can remove the dirt and let the turquoise begin to shine again.

Prepare for certain stones such as amethyst, turquoise, ruby, garnet, topaz, pearls to be protected from sunlight. Otherwise, they can change the original color and even lose it. Agree, you do not want such a fate for your decoration.

Wedding rings with stones should be protected from sudden changes in temperature and high levels of humidity. For this reason, jewelry should not be stored in bathrooms or in damp areas.

It is not always possible to protect the wedding ring from negative factors. However, certain tips increase the chances that your jewelry will be okay. The most important thing is to ensure proper care. Only if you know how to care for wedding rings will it be possible to celebrate the long-term preservation of the original beauty.

You should try to protect your jewelry from cosmetic products. For example, creams and whitening masks often contain sulfuric and mercury compounds that negatively affect gold and silver. Let's say the composition of mercury leads to the dissolution of gold and the formation of an amalgam. If the gold content is expected to be more than 15%, the amalgam will become a hard layer and the decoration will be covered with white spots. As far as you can imagine, the product will be completely damaged.

Sulfur can lead to the formation of sulfur compounds, which will lead to the appearance of a black tint on jewelry. Frequent contact of sulfur with precious metals even threatens the destruction of jewelry, and the metal cannot be restored.

Iodine is also dangerous for wedding rings, but stains from it can be successfully removed using a solution.

Lather is harmful to pearls, turquoise, corals.

Pearls, ruby, topaz are stones that are most exposed to direct sunlight.

Amethyst, amber, malachite are stones that must be protected from high humidity.

Wedding rings and safety precautions.

What should you do if you intend to frequently work with machine tools, construction tools, mechanical devices? In this case, the wedding rings, like the rest, must be removed. This will guarantee a high level of security. Otherwise, there is a risk of serious injury and damage to the wedding ring.

We remove the wedding ring when playing sports.

When engaging in physical activity, the wedding ring must be removed, as there is a risk of damage to the jewelry. This is due to the fact that the contact of sports equipment with the ring is prohibited. The chemicals found in swimming pool water are also hazardous.

We remove the wedding ring during summer work.

Do you like doing work in your country house? In this case, you need to remove the ring in order to avoid the risk of scratches on the jewelry. In addition, rings are often pleased with the presence of a stone, so you need to exclude the risk that the jewelry gets dirty or the stone is lost.

We refuse the wedding ring when cooking.

Housewives should remember that the dough can leave a very thin film on the decoration, which leads to the loss of its beautiful shine.

How should rings be stored?

The best places for storage are boxes, special covers, caskets.

Now you know how to take care of wedding rings, but do not take them off in public places in order to eliminate the risk of loss. Be sure to insure expensive jewelry and re-evaluate it every 5 years, as natural stones and precious metals are constantly becoming more expensive. To eliminate unnecessary risks of a sudden deterioration in the appearance of the product due to the lack of reliable fixation of the stone and the presence of cracks on the surface, you should regularly visit the jeweler and check the jewelry. Let the ring delight you all your life, like marriage!

How to prepare for your wedding: Articles

A ring that adorns a pure emerald, with its valuable characteristics, can sometimes surpass diamond jewelry of equal weight and appearance. Many believe in the miraculous properties of this stone, bringing good luck in love and deeds.

And for those who were born in May, the emerald has become a real talisman. The stone can be presented as a gift for an emerald wedding. He can also favorably emphasize the merits of absolutely any appearance. But the emerald also requires a lot of attention. If you do not want to deprive the jewelry of its exquisite appearance, then you must provide it with proper care.

You will need:

- special cosmetics for jewelry;

- jewelry brush with soft bristles;

- ammonia;

- baking soda;

- water;

- soap;

- suede or flannel fabric;

- cotton swab;

- box with compartments.

Instructions:

1. When buying an emerald ring, you need to consult with a jeweler about the proper care of such a product. Any gemstone is unique in its properties and is demanding in its care.

Also in serious jewelry stores you can buy cosmetics (foams, liquids, napkins, pastes) specially designed for the care of jewelry. A jewelry store consultant will help you make the right choice.

2. The environment can be detrimental to the product. Therefore, you should provide him with reliable protection. Especially for storing a ring with an emerald, there are boxes with compartments, inside of which there is a velvet lining.

It can also be harmed by temperature fluctuations and increased humidity. Make sure to remove the ring when performing hygiene and beauty procedures or when doing household chores. The adornment goes well with an evening dress, but is not suitable for work at home or for leisure. It is better not to sleep in jewelry, as the stone can be damaged (and it’s just uncomfortable).

3. Handy tools in conjunction with special "cosmetics" will help get rid of tarnishing the metal. Depending on which metal is taken as the basis for the decoration, a cleaning method is chosen. Darkening on gold can be removed with flannel or suede fabric.

The silver ring is washed with a warm solution of soda, after which it is rinsed and the remaining moisture is removed with a flannel cloth. The solution is simple to prepare: 2 tablespoons of soda are diluted in a liter of water. Platinum can darken when exposed to an alkali solution, so it should be cleaned with water and a cloth only.

4. To clean the stone itself should be approached with extreme caution. It is better to have the jewelry cleaned by a professional. Beryl with an admixture of vanadium oxide (chromium or iron) has a high hardness. On the Mohs scale, the value reaches 7.5-8 units. A diamond in a glass cutter is only 2-3 units harder than an emerald. Even so, the stone can be easily damaged when cleaning.

5. Stop your choice on the workshop where gentle cleaning is carried out. Ultrasonic treatment, so popular in many workshops, is not desirable for stone. Sometimes there are small cracks and chips on the surface of an emerald.

They are usually treated with oil and epoxy. Due to the fact that when the air fluctuates, the decorative protective layer can disappear, the product loses its appearance. Because of this, steam cleaning is also undesirable.

6. At home, the stone can only be cleaned with water and ammonia or soapy water. Use a special soft bristle brush for cleaning. Do not immerse the product in water, if the stone is attached to the metal with glue, it is better to simply wipe it off. The cotton swab will help with hard-to-reach areas. And the safety of the frame is guaranteed by processing without sharp objects.