How to use nail stickers. How to glue different types of stickers on nails. Features of using water stickers

26.09.2019

Devoting time to nail service is traditionally done in salons. But the pace of life and increasing costs lead to the search for solutions on how to create a manicure on your own so that your hands look well-groomed and graceful. You can show individuality and creativity with new nail art techniques by decorating nail plates with special stickers.

stickers

Film coatings have become an alternative to the usual nail polish. The ease of application and the richness of the choice of patterns, patterns, textured varieties make home manicure popular.

The main rules and procedure for how to use nail stickers are as follows:

Prepare the nail. To do this, you will need to remove the cuticle and polish the surface with a buff for reliable adhesion to the film coating, and then degrease.
Remove the protective sheet from the sticker and apply the adhesive side to the nail.
Gently and thoroughly smooth the coating with a wooden or plastic spatula to remove any air residue.
The edges, if necessary, are trimmed and processed with a ceramic or glass file.

Methods for gluing stickers on gel polish differ in the additional use of a top.

Types of stickers

The types of stickers are distinguished by the following parameters:

the size of the nail cover;
design features;
application methods.

By size, there are 2 types of stickers: covering the nail plate completely and partially.

Among the options with full coverage, or stickers for the entire nail, there are:

Application (transparent, one-color, with a rare arrangement of the pattern);
Manicure (with an image covering the entire space).

A single-color film, or “dry varnish”, allows you to do without the usual salon procedures and the need to patiently dry your nails. The choice of film prints is huge: in color, style, texture. The creation of a three-dimensional surface is a separate direction - 3D nail stickers, otherwise such a coating is called beaded.

Three-dimensional stickers are elements with a convex shape. This model is used for special occasions. In everyday life, three-dimensional design is less practical than flat options.

A separate place among the varieties of stickers is occupied by photo-mini-images. Designer's search for color collages from photographs and pictures is always unique and original.

Sets of self-adhesive tapes of different widths and colors have gained popularity. It is more convenient to work with the thinnest stripes for creating decor on different bases: varnish, gel or acrylic. Decisions on how to glue the tape on the nails will be prompted by the shape of the plate, style matching with the image and imagination.

For extended nails, special ornaments have been developed. They are large in size and are designed for combination options or a holistic design of the nail.

Gluing method

Stickers are thin and fragile, so careful handling of the material is required. Placement of the picture should be done strictly in the center and monitor the fixation of the image.

Manicure with stickers is applied in different ways. Among the first were water-based nail stickers that looked like baby decals, and then fashionistas learned how to apply nail stickers with aliexpress.

Before pressing to the nail, you need to hold the image in warm water. After carefully peeling off the paper part, the film with the pattern remains in place. After drying, it is required to cover the nail with a fixative varnish. It is almost impossible to distinguish transfer stickers on nails from the salon work of the master.

The second way is universal. Even teenage girls know how to properly glue stickers on nails if the surface is sticky. It is necessary to carefully attach the film on the base dried base varnish with the right side, and the process is completed. Additionally, it is recommended to cover the nails with a finish varnish to strengthen the result and prevent the rapid abrasion of the decorative layer.

If a mistake is made and a distortion of the pattern is observed, then you can correct the flaws using

beads, rhinestones, acrylic paint or shiny varnish;
replacing the picture with a new one.

Experience in application will tell you how to peel off the sticker and re-shape the nail. The decor technique is clear and accessible.

Foil

In new and unusual design experiments, manicure foil has become an indispensable material. It differs from the usual one in that it lies flat on the surface of the nail, is attached with a varnish, gel or sticky base. Foil on nails is popular due to its unique original shades.

You can choose the desired type of foil from the various options presented in the nail service:

transfer sheets and rolls - for manicure work you will need a gel with a sticky layer or special glue;
sheet foil - used both for cutting out individual figures and patterns, and for creating a casting layer;
embossed - suitable for complex structural design;
compressed - ideal for aquarium design, reminiscent of gold leaf;
in stripes - simple ribbons on a sticky basis with a wide range of colors give scope for fantasy patterns;
minx - thermal stickers for nails with an unusual effect.

Gluing method

Information on how to glue foil on nails can be obtained in the accompanying instructions for purchase and from consultants in salons-shops. There are no big secrets in this art, but it is useful to learn small tricks.

Before sticking the foil, you first need to remove the previous varnish coating, polish the surface of the nail plate. Then, elements of the appropriate shape and size are prepared for each nail. The backing should be peeled off and gently pressed against the nail. In the process, it is recommended to straighten the layer and prevent air bubbles from entering.

The methods for applying foil to nails are approximately the same when it comes to the adhesive base. Blanks can be individual for each finger or consist of fragments for cutting shapes.

You can complement the manicure with foil with beads, broths, rhinestones or acrylic painting. And after that, the decor elements are covered with a protective compound.

The desire to perform a manicure on your own should be combined with a manifestation of taste and knowledge of how to glue broths on nails or achieve a casting effect. A sense of proportion is very important in such an exciting and creative process.

The transfer foil is always glued onto the prepared base: after the base varnish has completely dried, a special glue is applied (you can buy it together with the foil) and wait a little until the glue becomes more transparent. Then a piece of foil is applied with the matte side to the nail, smoothed and sharply torn off. The result will be mirror nails.

Stickers

Gluing stickers is much easier than painting a small nail and wasting time on the stages of drying and applying layers of painting. Design techniques retain their original appearance for a long time and delight with beauty.

Using stickers yourself and teaching others is a fun and creative activity. In order for the decor of the manicure to match the overall style, it is important to decide on the choice of the appropriate “clothes” for nails.

Types of stickers

Stickers, or overlay plates, amaze with the variety and number of patterns for any exit or event. It is customary to distinguish between two main types:

flat;
voluminous.

Stickers differ in the way they are applied:

water;
adhesive.

Water stickers are transferred to the nail plate after soaking. The period of wearing a manicure is increased by using a shellac coating, a special dense gel.

Adhesive art stickers are difficult to distinguish from a professional result. The carved design goes well with a monochromatic manicure. Lace stickers are ideal for special occasions: weddings, anniversaries, corporate holidays. As a rule, the side or extreme parts of the nail are artistically decorated. The combination of white lace with contrasting varnish adds expressiveness to the whole image.

Acrylic or metal nail stickers give the right accents, complement the created pattern, are diverse in shades and species associations.

For French manicure, French stickers are presented in classic white and its shades.

Volumetric stickers are presented in options:

based on gel layers, including silicate ones;
from polymer clay (fimo-stickers);
visual effect of three-dimensionality (3-D-stickers).

Soft and flexible decorations convey three-dimensional images from flowers and butterflies to cartoon characters. Special clay is sold in the form of cut fragments, from which you can create a small masterpiece of a personal manicure.

A few tips:

three-dimensional color drawings are suitable for romantic meetings;
ladybugs and butterflies are appropriate for young girls;
rhinestones will add brightness to the image in the evening at a festive event.

Gluing method

The technology of applying stickers is familiar to those who already know how to make sliders on nails, which are a transfer film.

After treating the plate with an antiseptic, you need to apply a base coat of varnish. A light shade will emphasize the brightness of the applied pattern. After soaking the pictures for 5 minutes, the film is removed and the sticker is applied to the manicure. It is recommended to fix the result with a transparent varnish. Transfers on nails, as such fashionista stickers are called, will last up to two weeks.

Stickers can be glued with a dry layer of base varnish or special glue. You need to apply the first time and with pleasure, then the decoration will fit evenly and will fit snugly against the nail plate.

It is necessary to deviate slightly from the cuticle and the sides of the nail, by about 1 mm.

Volumetric decorations

Working with voluminous stickers or details requires accuracy, but the result is worth the effort.

Kinds

The main details of the volumetric decor are rhinestones, bouillons, loose glitter, beads, golden mesh or acrylic figurines.

In everyday life, volumetric design is not used. In solemn occasions, this is an original and creative solution. Execution is done on one or two fingers, if these are large protruding ornaments in the form of flowers or figures. Bouillons, beads or glitter can occupy the entire surface of the nail. Playing with color is used to accent or fix images.

Gluing method

Separate elements must be placed on a working sheet of paper before gluing. Then it will be easy to collect the remaining small beads or figures from it.

For applying volumetric details, a special gel polish is convenient to use. How to glue rhinestones on gel polish, you can learn from the following recommendations:

apply rhinestones on the second or third layer of gel polish;
use a magnetic pencil to maintain the planned order;
dry each layer;
with a thin brush, fix the protruding elements with a layer of top.

Bouillons are attached "wholesale" if a caviar manicure is conceived. To do this, a finger with a dry layer of base varnish should be dipped into a jar of bouillon balls or simply sprinkled on a handful of “caviar” on the nail.

The surface of small beads must be pressed gently with a finger or secured with a finishing varnish.

Let the result satisfy expectations and bring joy.

Beautiful and well-groomed hands with a bright, or, conversely, discreet manicure, make a good impression on others. If there is no time for the master's artistic work in the salon, you can decorate your nails at home. To do this, you need to master the technique of how to choose stickers for nails and glue them correctly.

The adherence of nail design fans to stickers is explained by the fact that:

Where to buy nail stickers

Stores specializing in the sale of products and accessories for nail bars and beauty salons have a wide range of stickers. Also, sticker sets can be ordered on the Internet, but it will take more time, although it will be much more profitable in terms of price and range of choices.

Classification

Nail stickers (how to glue them and create original versions will be described below) differ in the method of application to the surface of the nail:

On which nails of the fingers to glue stickers, design

Applying nail stickers like a pro is easy. The main thing is to choose the right style that will not seem vulgar. When choosing fingers to apply stickers on, it is important to know the measure and create a tasteful design.

Not guided by the principle "the more the better."

In the presence of large and long nail plates, you can decorate all nails in the “smile” zone.
A short nail plate involves the use of stickers on 1-2 fingers (for example, thumb and ring finger). This is important in order not to overload and weight the nail visually.
Decoration for a special occasion may involve a smart design using rhinestones and voluminous jewelry. In this case, it is also important to observe the measure and be guided by a sense of style. For voluminous jewelry, the location on the ring finger is considered optimal in combination with a suitable coating on other nails.
Color and pictures can be selected according to the season, events, age and personal preferences.

Preparatory stage

The preparatory stage is a set of the following actions:

Application technology for gel polish

After preparing each nail for a manicure with a shellac sticker, the following steps are performed:

After applying the base coat, it is necessary to dry the nails under an ultraviolet lamp.
The next step will be shellac coating and also dry.
The sticker is applied to the nail and the protective layer is removed from it.
After fixing the sticker on the nails, a finisher is applied and dried under the lamp.

Shellac stickers

Stickers on nails, how to glue them on shellac, how to dry them properly - all these aspects are discussed in detail below. The most suitable stickers for shellac coating are water-based stickers. Transfer stickers and photo prints have proven themselves well. An important condition is a flat and smooth surface of the nail plate.

In this case, the sticker will look good.

Nails are pre-treated.
This is followed by a base coat and shellac.
Everything is dried under the lamp.
The resulting sticky layer is removed.
The sticker is applied to the nail, straightened and fixed.
Nails with a sticker are covered with a top.

Such a manicure lasts a long time and reliably.

Self-adhesive water stickers

After the preparatory stage described above, it is necessary to prepare:

You need to do the following:

Try on nail stickers if full coverage is planned.
Apply a base coat of polish to the nail.
Dip the stickers into the water and wait until they are ready to be removed from the protective layer.
Carefully pick up the sticker with tweezers and apply to the nail.
Excess moisture from the sticker is removed with a napkin or cotton pad.
It is important to handle the sticker carefully, straightening and stretching the image over the nail.
Next, a final fixing layer is applied.

Stickers that need to be torn off later

Tear-off stickers are usually a piece of thin foil that covers the entire nail or certain parts of it. For this, a special nail glue is used.

Here is one of the designs:

For such a design, only special nail foil is suitable. You need to be careful with it, as it is very thin and easily torn.

Stickers attached with glue

Stickers on nails (how to glue them without a special adhesive coating on the back) require the use of special manicure glue. With its help, voluminous and heavy jewelry for nails are fixed.

Usually glue is supplied in the kit and it is better to use it.

After the initial treatment of the nail and the application of the base, glue is applied to the nail.
After a few seconds (the exposure time should be indicated in the instructions), decorative elements are applied to the adhesive surface and pressed tightly against the nail.
If necessary, the entire design is covered with a top coat of transparent varnish.

Transfer stickers

It is not difficult to work with products that are transferred to the surface of the nail plate:

Full size water sliders

Sliders are sold in 2 versions:

Ready-made forms for nails
A single sheet from which to cut shapes.

Slider design is suitable for gel polished nail.

To decorate nails with a slider, you need:

Shape the nails, clean them and degrease them.
Cover the nails with gel polish and dry under the lamp.
Soak the sliders in warm water (soak time is indicated in the instructions).
Move the slider aside and remove it from the paper base.
Attach the sticker to the nail and press it with a cotton pad to get rid of excess moisture.
Cover your nails with a final coat of clear polish.

Lace

Sliders with a lace pattern come in 2 types:

For greater effect, a sticker with a lace pattern is selected for a plain base polish.

Easy to paste:

The nail, which has undergone preliminary processing and turning, is covered with a monophonic varnish of any shade.
A fragment of the lace pattern is cut out from the palette and separated from the base.
With gentle movements, a transparent slider is applied to the nail.
The composition is covered with a fixing varnish.

Broken glass

To create the effect of "broken glass" special foil paper is used.

The choice of colors and effects is huge: mother-of-pearl and mirror fragments from pastel to bright and catchy colors will definitely attract the attention of others.

Such a simple and inexpensive way will create the effect of an expensive salon manicure. It is important to remember the thoroughness of execution, since the corners of “broken glass” sticking out in different directions will only spoil the beauty. Additional decorations in the form of sparkles, rhinestones and "eggs" will be inappropriate.

foil products

Foil stickers are shiny or matte pieces of thin foil. Usually.

They are glued with a special glue, which is applied either to the entire nail plate, or to part of it.

The treated nails are covered with glue.
After a certain time, a foil is applied to the area covered with glue.
Unnecessary pieces of foil are carefully sawn off or cut off.
The nail is covered with a final layer of transparent varnish.

3D stickers

3D stickers are distinguished by volumetric details, bulges on the surface. You need to glue them like this:

3D stickers will not interfere with everyday activities, even despite the voluminous design.

Shellac stickers

After preparing the nails for manicure, the application technology will be as follows:

The nails are covered with a base and a layer of shellac.
The surface to be applied is thoroughly dried under the lamp.
The sticky surface is cut off with a buff.
The selected pattern is removed from the palette and applied to the nail. At the same time, it is important to ensure that the picture is superimposed evenly and without folds.
After smoothing the sticker, a layer of clear fixative varnish is applied.

Photoprint

When working with photoprint stickers, remember that the use of water is contraindicated.

Gluing them is simple and easy:

A photo print of the desired size is glued onto the prepared nail plates. If the sticker is full-size, then the corners and protruding parts are carefully cut off or folded down.
After that, you can carefully file the protruding ends with a nail file.
A transparent fixative is applied on top.

It is necessary to monitor the accuracy of contact and fixation of the sticker on the surface of the nail.

golden stickers

Gold stickers will look great at a gala evening event.

Gluing them is not difficult, but additional practice does not hurt.

Honed and fat-free nails are covered with a colorless base varnish.
After the base has dried, the gold foil is removed from the base and applied to the nail in an even layer.
With a cotton or orange stick, the foil is distributed over the entire surface. The foil is quite thin, and therefore you should not rush, so as not to break the fragment.
The protruding corners of the film can be cut off with a file, moving from top to bottom along the edge of the nail.
A fixing layer of varnish is applied on top.

Velvet stickers

Velvet stickers are considered another popular novelty. Usually they are patterns with a short pile.

These stickers are attached to a transparent film.

After pre-treatment of the nails, a base is applied to the surface of the nails, transparent or colored, depending on individual preferences.
The velvet pattern is removed from the substrate and applied with the sticky side to the nail.
A finisher is not needed in this case, as it can destroy the velvet effect.

Velvet stickers are quite durable, and therefore, according to the manufacturers, they will stay on the nails for more than 15 days.

Reasons for peeling sliders

Important conditions for maintaining a manicure with sliders that professional nail art masters observe are:

High quality material.
Compliance with all rules when applying sliders.

If the master decided to save money and used low quality sliders, they will begin to peel off already in 3-4 days. It is important to remember that before fixing the slider, you need to dry the lower layers of the base varnish well.

The sticker should be carefully pressed and smoothed over the surface of the nail. If the work is not done carefully, then the stickers will begin to peel off the nail after a very short period of time.

The picture is not bright enough or almost invisible

This happens if the basic conditions are not met:

Chips in the finish

Defects of this type appear for several reasons:

Poorly dried base and finisher layers.
Too thick coating.
When sealing the tips, too much top is applied. As a result, cracks that have arisen due to the critical load.
Uncured surface of the decal where the top has been applied.

Pattern Peel Off With Top Coat

To save a manicure for a long time, you must remember that even the highest quality material will not withstand prolonged contact with water. Therefore, experienced users are advised to wash dishes, windows and floors with gloves. Also, the durability of a manicure can be harmed by the lack of a transparent top, designed to protect the sticker from external factors.

The sticker does not fully adhere to the nail plate

The sticker may bubble if:

It was glued carelessly, and air got under it.
The adhesive surface of the slider is processed unevenly.
Poor quality components used.

In order to know how to glue stickers on nails, it is not necessary to be a nail art specialist. You can make a beautiful manicure at home, you just need to practice a little.

Article formatting: Mila Fridan

Video about stickers in manicure

How to stick stickers:

Beautiful and well-groomed nails distinguish a beautiful and well-groomed girl. With the help of the original design, it is easy to stand out from the crowd and show your uniqueness. At present, a huge number of products are presented on the industry market, with the help of which women's fingers will always be in the spotlight. One such popular option is sliders. Let's take a closer look at their features, as well as how to glue stickers on nails correctly.

What it is

How to apply nail stickers:

Coat your nails with colored gel polish.
Dry well and remove the sticky layer with a lint-free cloth soaked in clinser.
Separate the sticker from the base and carefully stick it on the nail.
Smooth out wrinkles with a bamboo stick.
Cover the design with a finishing top.

3D

These three-dimensional stickers are not flat, but slightly convex. Such sliders can become an original decoration for the entire manicure or highlight only one nail. Embossed 3D stickers are both water-based and adhesive-based. They are quite easy to work with, and in the sock they are not very whimsical. If you fix them correctly and well, then it should not arise with them. They will not cling to clothing or the body.

They are attached in the same way as the previous options. Only such stickers do not need to be smoothed. One of the disadvantages of such voluminous stickers is the difficulty of removing them. You need a special nail polish remover, tweezers or a scraper.

Application methods

But it is not enough to know how to glue stickers on nails correctly. It is important to remember about several ways to apply them. Let's take a closer look at each of them to make your nail design even more perfect.

On uncured varnish

The most reliable way to design a slider is the method when prints are transferred to an uncured layer of varnish. Many nail artists use a special brush to smooth the sticker. Thanks to it, many problems can be avoided: the drawing will lie flat and not tear. The brush tightly fixes the slider without forming unnecessary bubbles, bumps or waves.

This method has a noticeable resistance, because the coating dries along with the slider. Therefore, the bond will be quite strong. Just one finishing top is enough to secure.

on the sticky layer

The most convenient and easy way that many girls adore and put into practice. Stickers are attached to the top layer. The slider must be straightened with a brush or bamboo stick, and then re-secured with another layer of top. Make sure that the size of the sticker does not go beyond the side rollers.

For a finished manicure

A similar method is a real savior for a finished manicure that needs to be updated. If your nails are painted with gel polish, but you suddenly want a change, then this option is for you. You do not need to remove the old coating, you only need to renew it. Sliders need to be fixed on an acid-free primer (ultrabond). This tool does a great job and fixes the stickers on the nails. And you can fix such a design with the same top.

Now you know how to apply nail stickers. The procedure is quite simple, does not require special costs and does not take much time. But after a few minutes, an unusual print will flaunt on your nails, which will attract the attention of everyone around you.

Stickers for nails under shellac, gel polish, varnish are a real salvation for women who want to diversify their manicure, but do not have a talent for painting. It is not difficult to apply them on the nails, and if everything is done correctly during the manicure, they last a long time.

Before you start gluing stickers, you need to think carefully about the design. At the same time, it must be borne in mind that it is not at all necessary to apply them to all nails: sometimes it is enough to decorate only one or two fingers to make the manicure look interesting and original. It is also necessary to take into account that the stickers are quite self-sufficient, and therefore the nails do not need other decorations (fimo, rhinestone, modeling).

Currently, there is a huge selection of stickers in a wide variety of colors, designs and varieties. According to the method of sticking to the nail plates, the following types of stickers are distinguished:

self-adhesive water;
transferable;
water;
full size water sliders;
printed film.

Each of these types of stickers is well suited to a particular type of coverage, there are also universals among them. Therefore, before buying, you need to determine the surface on which they will need to be glued. For example, self-adhesive water-based stickers cannot be glued to gel polish: from such a coating they slide, twist, and no matter how hard the master tries, they look ugly. They are used mainly for ordinary lacquer manicure, on which they hold well.

But as stickers for nails under shellac and gel polish, water stickers are very well suited. They have a very beautiful design, almost indistinguishable from hand painting, and are applied on a very thin film, which allows them to be firmly attached to the nail. The topcoat applied to them holds well, does not slip, and they are attached very easily. They are also good because they allow you to experiment with design.

Features of different types of stickers

Self-adhesive water stickers are considered the easiest to use. True, they cannot be used for gel polish or shellac, but they can be glued directly to the nail or to ordinary varnish. To do this, remove it from the base, place it in a predetermined area of \u200b\u200bthe nail and put a cotton pad on top, soaking it in warm water. After two minutes, remove the cotton wool, after which a picture will remain on the nail plate, which can be left like this, but it is better to apply a transparent varnish on top.

Under gel polish, decals are well suited, which are a transparent sheet with a printed design. First, it must be separated from the base and applied to the selected area on the nail plate. In this case, it should be borne in mind that the decal is well displayed, the surface of the nail must be absolutely flat and smooth. After the time specified in the instructions, remove the sheet, apply a topcoat, and dry.

Another type of sticker that fits gel polish is known as a slider. It is a drawing applied to a paper base, which must be cut to the size of the nail plate, lowered into warm water, removed and blotted with a paper towel to remove excess moisture. After that, pick up the base and stick it on a well-dried layer of gel polish. Then it remains to apply the top, dry.

Water stickers are well suited for gel polish. They can be glued both on the entire plate and on its part. Do this by analogy with the slider: cut out the shape using tweezers, dip it in water, blot with a napkin, separate the base and carefully stick it on. If a sticker with a design is applied to shellac, it must be glued to a sticky layer. Then it remains to apply the top and dry.

One of the types of stickers for gel polish is a printed film. The highlight of this type is that the design applied to them looks extremely beautiful and bewitching. They are sold in two varieties: a solid sheet, from which you need to cut out the shape yourself, or already made shapes. Unlike previous methods, water cannot be used during film gluing.

It is necessary to carefully peel off the film from the base, picking up the edge with tweezers, put it on the nail plate indented from the cuticle and smooth it with an orange stick or paper napkin. Tuck the free edge of the film under the tip of the nail and cut it off with a buff. Then apply the top, securely sealing the edge of the nail: water should not get on the film during wear.

The nuances of the procedure

Before you start doing a manicure, you need to determine the type of stickers, the type of coating, the color of the base gel polish. It must be selected depending on the selected pattern, while it should be borne in mind that the pattern looks clearer on a light background.

Regardless of the type of stickers and coating material, nails must be prepared before sticking drawings. Remove the old gel polish or other material, and then treat the nail plate: push back the cuticle, cut off the skin, give the free edge of the nail a beautiful shape. This should be done taking into account the length of the nails, the shape of the fingers and the lunula (located at the base of the nail, it is here that keratin cells are produced, which are subsequently added to the nail plate, due to which the nail grows).

For example, for women with short fingers, it is desirable to give the free edge of the nail an almond shape, which will visually lengthen the fingers.

If gel polish is applied, you need to remove the natural shine with a soft nail file and degrease the surface with a special tool using linen rags or napkins for manicure. You can’t use cotton wool: in this case, the villi will remain, which will lead to chips.

After that, apply a dehydrator that removes excess moisture from the nail plate, then a primer, whose task is to ensure better adhesion of the gel polish to the nail. Before applying a layer of the next product, you must wait for the previous one to dry.

These stages of work are mandatory, because if a foreign object, even of the smallest size, is between the nail and the coating or sticker, this will lead to the appearance of air pockets. Such a manicure will look sloppy and will be short-lived.

Then you can start applying the coating. It should be borne in mind that each applied layer of base, gel polish, top should be dried well under an ultraviolet lamp for as long as it says in the instructions, usually about two minutes. Otherwise, the layer will not dry out, which will lead to early chipping.

The base is applied with the first layer, after which - gel polish, if there is a need to make the color more saturated - the second layer. Then you need to apply stickers. If these are introductory drawings, they must be moistened in warm water, then pressed against the nail plate and removed with tweezers the protective transparent layer. In order for the pattern to lie flat, small incisions must be made at the bend of the nail.

If the sticker must cover the nail completely, it must be placed so that there is at least one millimeter between it, the cuticle and the sides of the nail, otherwise the sticker will last only a few hours. To do this, before applying the sticker, with an orange stick or a pusher, you need to move the cuticle and side rollers to the maximum possible distance. In half an hour they will return to their original place and hide the indent.

At the final stage, a top coat is applied, it is for him that even when sticking the sticker, a small gap is left on the sides of the sticker so that the top can adhere to the nail, otherwise it will not stick. The top coat should be done in two layers and be sure to seal the edges well so that the sticker stays on. Dry each layer under a lamp.

How long do stickers last

How long the sticker will last depends on the correct implementation of all stages of manicure, the quality of the materials, and also on how correctly the woman will handle the applied coating (this primarily applies to household work during which water and chemicals are used).

If the sticker does not last long, this may be due to the fact that it was applied to a poorly dried layer of gel polish, or the drawing itself was poorly dried before being on the nail. Another reason may be that the sticker was of poor quality or too thick.

If the finish coat is chipped, it means that it was applied to a poorly dried sticker, when applying the pattern, there was no room left for the top to adhere to the gel polish, the sealing of the nails was poorly done. The top coat may come off prematurely if a poor quality top coat was applied or one that is not suitable for decal designs. Therefore, before buying, you need to clarify this point in the instructions.

In the article you will find information about the main types of manicure stickers, their advantages and disadvantages, step-by-step technology for their use.

Types of nail stickers

There are several types of stickers:

Elements with an adhesive surface. Such images are glued on their own, as they already have an adhesive base. To create a manicure, simply peel off the paper base.
3D. Such stickers are characterized by a convex shape. They can be used as an independent decorative element, or as an additional one.
Decorative materials requiring the use of liquid. In order to transfer the image to the nail plate, it is necessary to lower it into warm water, and then press it against the nail and remove the paper base.

The most popular elements are sliders, photo design and 3D stickers.

Sliders

There are 3 types of such decorative elements:

For the whole nail:
- The sticker is located on the entire surface of the nail plate.
- The element is fixed due to the fit of the base of the image to the lacquer coating and the application of a protective top.
- Various colors of base coats can be used.
- Manicure stays fresh longer than with other types of sliders.
With a transparent base:
- They create a contrasting rich ornament on the nail plate.
- Clear base sliders are designed for light or white polish.
Having a dense pattern:
- You can use any base coat color.
- It goes well with additional decorations.

These stickers are available in water-based and adhesive-based.

These species have similar characteristics, except for the method of removing them from the paper base:

Ease of use for decorating individual sections of the nail plate.
The presence of convex parts, the volume of which does not interfere in everyday life.
When creating a relief manicure on the entire nail, difficulties arise at the same time, since they must be trimmed so that wrinkles do not form on the bends of the nail plate.

Photodesign

Such stickers look like a thin film on a self-adhesive cardboard base. Drawings can be very diverse: cartoon characters, ornaments, animals, plants, symbols and others.

There are several types of these decorative elements:

separate images of any subject or object within one film;
a set of 10 plates designed to create a manicure on the entire nail;
strips designed to create.

How to glue

Nail preparation

The old varnish is removed.
The nails are given the same shape and length.
Nail plates are degreased by wiping with nail polish remover.
The base is applied.

Step by step guide to using sliders

Water Based Transfer Slider:

2 layers of varnish are applied.
A fragment of the image is cut out.
the section of the pattern is immersed in warm water for half a minute, and then separated from the base.
The decorative element is placed on the nail plate, and after it dries, it is covered with a transparent varnish.

When using an adhesive-based slider, you simply need to separate the design from the cardboard without using water. When used instead of regular gel polish, each layer must be dried with a lamp, otherwise the technology for creating this design is no different.

Step-by-step guide to using 3D stickers

The base coat is applied in two coats.
After the lacquer has dried, a suitable sticker is separated from the paper base. To do this, just pry the image with your fingernail.
The element is applied to the right place and smoothed.

If the sticker was water-based, it can be peeled off by soaking it in warm water for 3 seconds and then simply sliding the image off the cardboard.

Step-by-step guide to using photo design

For photo design of a part of the nail:

A light-colored varnish is applied in two layers.
The desired pattern is cut out.
The film with the image is separated from the base and glued to the desired location.
The picture is carefully smoothed out.

For photo design for the nail plate in full:

Gel polish with photo design:

It is applied under the gel, which is dried in an ultraviolet lamp.
Next, a light-colored gel polish or a matching image color is applied. The gel is dried in a lamp.
The desired part of the image is cut out, and the picture is separated from the base.
On the reverse side of the film is applied.
The film is smoothed on the nail and dried in a lamp.
Excess areas of photo design are cut off with scissors, and after drying they are filed.

Consolidation of the result

To avoid quick damage to the manicure, after gluing the decorative elements, they need to be fixed on the surface of the nail, following the recommendations:

After applying the image, its surface must be smoothed with a cotton swab.
After the pattern fits snugly to the base, it needs to be covered with a top coat or colorless varnish.
The protective coating must be completely dry, and then apply another layer.

Advantages and disadvantages

Slider design

pros:

ease of transferring the image to the nail plate;
getting an interesting manicure;
when applied to the gel, such a manicure lasts a very long time;
low cost of decorative elements;
a wide range of images.

Minuses:

when applied to varnish, the picture quickly begins to peel off;
the difficulty of cutting the element to the size of the nail due to the formation of hooks;
when fitting the image to the size of the nail plate, you can ruin the workpiece.

pros:

Minuses:

To remove the sticker, you will need to make an effort, since the nail polish remover only removes the design, and the film remains, which must be scraped off.

Photodesign

pros:

availability of decorative elements;
the speed of creating a manicure;
the possibility of making any image;
The image is similar to professional hand-painted.

Minuses:

fragility of images when applied to ordinary varnish.