How to iron pants without arrows. Tricks for getting perfect shooters. Hot iron mug

29.05.2019

A distinctive characteristic of classic trousers is the arrows, but after the first wash they may disappear. In this case, do not worry, because it is enough to carry out the correct ironing, and they will return. How to do this, we will consider further.

3 steps of ironing trousers with arrows

For this procedure, in addition to an iron and an ironing board, you will need gauze and pins. Having prepared everything you need, you can start ironing according to the following instructions.

Step 1

The most important thing is that the surface on which you plan to iron is flat. To do this, if you have to iron on the table, you need to cover it with a baby blanket or bedspread, but it is important that the surface is not too soft.

Having created the necessary conditions, you need to carefully iron the pants themselves:

Check the iron that the ironing surface is clean, and then set the required temperature based on the indications on the label.
The legs are turned inside out and the fabric is well ironed from the inside.
From the seamy side of the fabric is carried out with wet soap in those places where the arrows will pass. This will allow them to hold on longer.
They turn it inside out again, iron the pockets, but so that they do not get printed, it is worth putting paper or a small towel in them.
After the pockets, the belt is ironed.
Iron the pant legs along the central part and at the seams. Make sure that no dents remain.

Sometimes, scorching spots may form on the trousers during ironing. You can get rid of them if you grease them with 2% hydrogen peroxide solution, wipe the area and then rinse your trousers in clean cool water.

Step 2

At this stage, a gauze is prepared, which will be used to iron the arrows. This is necessary so that the fabric on the trousers does not shine after ironing. If there is no gauze, you can choose another fabric, for example, chintz or calico.

If you do not have experience in smoothing the arrows, then it is better to moisten the gauze in plain water, but for the experienced we recommend preparing a special solution: add 1 tbsp. To a liter of water. l. table 9% vinegar and a little liquid soap, mix everything well. But if the trousers are black, it is better not to add soap so that streaks do not appear. Gauze is soaked in this solution.

After ironing with this composition, the arrows will fix better, but you can get rid of them only after washing.

Step 3

Go directly to the arrows:

The first thing to do is fold the pant legs correctly. For this, the side seams on the product are adjusted to each other. If the trousers are sewn correctly, they will just match the grooves.
You can additionally fix the trousers with pins, connecting one leg with the other so that they do not move, especially if the fabric is silky and slips.
They fix everything and place the trousers on the ironing board.
Cover the trousers with wet gauze and begin to iron the arrows - first in the front, then in the back. It is important to know that the arrows should not be along the entire height of the trousers. They should end at 7 cm from the waist.
Flip the trousers over and repeat the movements. It is advisable to iron two legs at the same time. Some housewives try to iron each leg separately, but this is much more difficult.
When ironing the arrows, there is no need to move the iron frequently, even if the trousers are fixed with pins, the fabric slides off. Therefore, it is better to hold it for a while, moving very slowly.
Iron until the fabric is completely dry.

The fabric itself is of great importance. For example, if it is light and thin, then the arrow is easy to get. When trousers are made of thick fabric, it will take much longer to steam the fabric to achieve the desired result.

How to make arrows on trousers correctly is clearly shown in the video:

Briefly the procedure for ironing trousers with the creation of arrows is demonstrated in the following video:

After receiving the arrows, it is not recommended to put on the pants immediately. They should dry, and the arrows should "hang down". To do this, they are hung in a closet in the same folded form with pins.

How to remove smoothed arrows on trousers?

Sometimes you have to remove the arrows on the trousers, on the contrary. This is especially true for tight trousers when there is no need to maintain a business style. So, to remove the arrows, you should adhere to the following recommendations when ironing:

It is important to choose the correct heating temperature of the iron - it should be close to the highest.
Ironing after washing, when the product is slightly damp.
It is worth ironing from the inside out, and you can use a wetted cloth again - put it on the arrows and steam it well.
If the legs are dry, but the arrows remain, you can walk over them with a sponge soaked in water and re-iron them through wet gauze.
Before ironing, the fabric can be abundantly moistened with a spray bottle with a glass of water in which it was previously dissolved for 1 s. l. conditioner for linen.

Removing arrows from trousers is not a quick process. How correctly, depending on the type of fabric of the legs, they go through 10-20 ironing procedures.

Video: Workshop on ironing trousers with arrows

How to iron trousers with arrows is described in detail in the proposed video:

So, in order to get arrows on the trousers, it is enough to initially iron the fabric, and then cover it with damp gauze or any thin cotton cloth in order to avoid shiny stripes and create arrows, adhering to the recommendations above.

Ironing the clothes is a process that inherently takes place in everyone's life, but requires skill and patience, as it is very laborious. Today you can find and choose from a large number of the iron that suits you best in terms of quality. After all, many models have been invented and developed with cleaning systems, steam shock, steam humidification, all kinds of attachments for ironing various materials. All these functions make ironing fabrics much easier. But each has its own secrets that facilitate ironing the most difficult and speed up this procedure.

There are certain tips, adhering to which you can extend the life of expensive things and not so much.

Take cheesecloth or white and slightly moisten, gently lay it out and steam the top of the pants and the belt through it. Smooth on the inside without moisturizing. Only without excessive enthusiasm, so as not to leave typos on the top side.

Then align the crotch seam with the side seam and lay out on the ironing board. If you forget to do this, your ideal arrows will not be symmetrical or squint. Outside trousers, you only need to steam through wet gauze so that unwanted shine or yellowness does not spoil the appearance.

Take a special look at the trousers on your knees. In case of loss of shape in these places, it is necessary to make tangent movements to ensure that the fabric in these trousers is evened out.

Overdried places, and this sometimes happens when ironing, must be wiped with a cloth soaked in vinegar diluted with water (1 tablespoon of vinegar per glass of water). But this tool works well on dark. And for a light one, it is moistened with hydrogen peroxide in a 2% solution and laid out on or any other bright light for a few minutes. Naturally, after that you need to rinse the pants in cold water. Any manipulations with must be done very carefully so that the thing remains presentable.

For those who want the arrows not to last longer, they can iron the arrows with a cloth dampened with vinegar diluted with water, or rub the arrows with a piece of dry soap on the wrong side.

When you are finished ironing your trousers, they should drop a little and cool down completely.

Preparatory stage

Thus, to iron trousers with arrows, you will need:

iron, preferably with a steaming function;
ironing board;
ironing press for trousers (if any);
gauze or white cotton material;
pins or stationery clips;
soap.

Before you start ironing trousers with arrows, you need to look for a label on the clothes that indicates the temperature at which the product should be processed. Then prepare the tools: unfold the ironing board or cover the table with a blanket, pour water into the iron, turn on the appliance.

Trousers ironing rules

To iron trousers with arrows correctly, you first need to put them in order from the inside out, and only then proceed to the front side. Arrows - the final stage of ironing.

To iron classic trousers, proceed as follows:

Turn pants inside out.
Set the temperature on the iron.
Iron your pockets. To do this, put a clean sheet under them to avoid the appearance of creases and folds on the front side, which will not be easy to get rid of.
Iron the belt.
Pass the iron over the legs, making sure that during ironing the fabric is even and does not wrinkle. Be sure to iron the front and inner side seams, paying particular attention to the top. To iron the inner side seams in the thigh area, you need to "put" the pant leg on the side of the ironing board.

After finishing ironing from the inside out, turn the pants out and iron the seams at the top through cheesecloth. To prevent them from being printed on the other side, put the leg again on the side of the board. If ironing is done on the table, put a soft, even pad inside the pants. Then put the product in such a way that the inner seams lie on top of each other and iron the legs without touching the places where the arrows will be. Iron each pant leg through cheesecloth, periodically moistening with water.

The next step is to get straight and symmetrical arrows. It is necessary to unfold the pant leg so that the inner and side seams are exactly aligned with each other: their discrepancy even by half a centimeter will cause the arrow to deviate to the side. To prevent the material from shifting, it must be fixed at the top and bottom with pins. For the same purpose, it is convenient to use office clips.

Put wet gauze on the fabric, set the desired temperature in the iron. To prevent the material from shifting, ironing must be done carefully: you do not need to drive incessantly in the direction of the arrow. It is enough to lift the iron away from the fabric and apply it again for a couple of seconds. The arrows will be smoother if you start ironing from the knees. So that they do not lose their appearance for a long time, before turning the pants out to the front side, you can draw a line from the inside out with laundry soap, having previously moistened it in water. Having finished working with one leg, move on to the other.

A household appliance such as an ironing press for trousers can make it easier to work with arrows. After the pant leg is fixed with pins, you need to put it between the heating plates and fix it for the time indicated in the instructions.

Squeezing tightly will create perfect folds. If the arrows did not work out, do not despair. It is enough to moisten the gauze in a solution of 9% vinegar (2 tablespoons per 1 liter of water) and steam the trousers from the inside out. After that, start creating even arrows again.

How to iron pants without an iron

Sometimes there is a need to iron without an iron and without gauze at home. For this purpose, you can use several methods. The simplest, but longest, is the tension and pressure method. When tensioned, the material smoothes well, you can improve the effect by pressing it down with something, moistening the creases. If the trousers are with arrows, it is necessary to process one leg at a time, having previously combined the inner and outer seams.

Another method is to use a hot iron mug. Pour boiling water into the dishes, close the lid and start ironing. The same method can be used to iron the arrows on the trousers. You can also use steam, for which you can boil the kettle, remove it from the heat and smooth out the wrinkles with the steam emanating from the spout. A slight bruise can be corrected with a damp palm by washing your hands first.

You can tidy up your pants with an incandescent light bulb. To this end, turn the trousers inside out and iron small creases. Be careful not to burn the fabric. For synthetics, this method is not the best option.

If you need trousers on a trip, they need to be folded correctly. For this purpose, the trousers should be rolled with a roller before riding. This will avoid wrinkling and headaches from the thought of how to tidy up your pants.

Such an irreplaceable and popular thing in the home wardrobe, like trousers, has long found its honorable and, let's say, leading place among all clothes in our time. Although in ancient times trousers were considered a kind of disgrace and tastelessness, something unpleasant and uncomfortable to wear, causing laughter and condemnation, the perplexed glances of others, clothes sewn between the legs came to replace men's dresses, skirts and capes. At first, the view, of course, was so-so, but with the speed of a kaleidoscope, fashion world trends have significantly improved this thing, and now in our 21st century we do not want to part with trousers under any circumstances. They have proven their practicality, guaranteed quality, versatility in any weather, convenience and comfort. Today, all countries of the universe are riveted to their diversity and richness of styles. Still, after all, everyone can find for themselves what suits him best. The soul asks for something classic and unpretentious, here are trousers with arrows, or you can without them, if such is the mood. Lead a healthy lifestyle and constantly disappear in training, then sweatpants will come to the rescue. If you love to feel confident, jeans will give you just that. And such models as bananas, riding breeches (for lovers of eccentricity), Afghani, chinos, cargo, hipsters, skinny, carrot, slim, boyfriend and much more will cause a sensation among the younger generation. Pants "skyrocketed", they are a huge success among women, men and even children. Without them, we cannot imagine our daily life either at home, on the street, or at work. Beauty is beauty, however, as you know, it requires sacrifice. And we become this victim, because in order for this thing to always impress with its neatness and well-groomed appearance, it is necessary to wash it in time, and then, after drying, iron it for a long time and tediously. So let's talk today in our article about how to learn how to iron trousers correctly and without problems at home in order to avoid unaesthetic gloss, burning stains from the iron and gray marks from untreated water on the surface of the fabric.

What do we need?

In order for you to like the ironing process and not cause a storm of negative emotions, you need to approach this matter thoroughly. It does not matter whether you are a man or a woman, a highly professional specialist in this field or a beginner, you have to prepare beforehand before processing and smoothing the surface of your trousers from folds and various kinds of bruises. For high-quality and efficient work at home, you will need:

An ironing board (if you don’t have one at hand, it doesn’t matter. A clean and even floor in your house or apartment will also work. In addition, for added convenience, you can sit on a table or chest of drawers, the parameters of which allow us to achieve our goals).
Iron (it would be nice to become the owner of modern innovative technology, where there is not only a thermostat, but also a steamer, besides, a chic sole, consisting of composite materials such as Teflon, ceramics or cermets. With such equipment, you will not be tormented by the fear of burning a hole in trousers, leave traces of a slight or specific burning sensation and other blemishes).
A thin cotton barrier or a piece of gauze (so that no traces of an unpleasant shine remain on the surface of your pants, the sole of the iron does not stick to harmful fabric, you need to insure yourself with this element).
Metal clips and a spray bottle (so that the ironing process goes like butter, without torment and nerves, you need to fix the edges of the legs with metal clips or pins. In this position, the product will not fidget on the ironing board, table, floor or other surface of your choice. And in case, at the beginning of work, you find that you have dried out the thing too much, it must be treated with distilled water from a spray bottle).

That's all, in principle, a set for caring and neat housewives. With it, your work on processing trousers for women, men or children will seem easy, fast and of high quality. And we go further.

Ironing modes for all fabrics

Before you are going to iron well-washed and dried trousers from a jacket, you need to pay attention to the label located inside them, which contains complete information about the permissible ironing temperature of this fabric and its other indicators. If, due to washing, the patch has lost its color, and you cannot read what is indicated there, then here is our auxiliary information, thanks to which you can easily relate your type of trouser fabric to the proposed types and choose the right mode for ironing.

100% cotton... The optimum temperature for ironing is 140-170 degrees. Wet steam treatment is acceptable. In order for the fabric to quickly straighten and take on the proper form, you should firmly press on the iron during work.
Cotton with a mixture of synthetics (polyester). The maximum ironing temperature does not exceed 110 degrees. If the fabric does not take the required shape, then use a small amount of steam formations or a slight spray from a spray bottle.
Synthetics. When processing such delicate fabrics as synthetics, you should focus on the "Silk" mode or some other no less gentle. As a last resort, set the thermostat to minimum. The steam should not be used at all, as some changes in color and fabric can be obtained.
Viscose. When it comes to how to iron viscose trousers, it must be remembered that this type of fabric will require a temperature regime of no higher than 120 degrees, while a small amount of vaporization is permissible, if necessary. It is strongly recommended to iron the product upside down and through a damp thin cloth.
Cotton and linen. 180 degrees, strong steam exposure and preliminary moistening will be enough to return the pants to a neat look, just do not forget about the need to turn the product inside out before the direct processing process.
Linen. Pants made of this fabric should be ironed at a temperature of 180-200 degrees. From the inside, using pre-moistening, you can remove all unnecessary folds and bruises with a strong steam.
Silk. Delicate and soft silk requires the same gentle and gentle processing temperature as 60-80 degrees. It is recommended to iron garments made of this fabric without using steam, but using a damp barrier cloth.
Chiffon. 60-80 degrees for chiffon is considered the most suitable temperature for ironing women's pants. In this case, you should not use steam, you just have to limit yourself with wet gauze and light pressure on the iron itself.
Nylon. The optimum temperature for vertical steaming is 60-80 degrees. It is better not to try it with an iron, since there is a high probability that the product will melt and stick.
Semi-wool and wool. It is advisable to process vertically with steam at a temperature of 100-120 degrees through a damp cloth.
Denim is soft and rough. Having turned out the trousers, it is necessary to start ironing at a temperature of 150-200 degrees (depending on the texture of the trousers) from the inside in a pre-moistened state or on the front side through a damp cloth.
Knitwear. The temperature is set before vertical processing to minimum or medium. The product will need to be turned out and straightened carefully.

Ironing trousers with arrows

So that you do not have to spend all your free time working with the iron, you must clearly and systematically follow step by step, following our invaluable and rather ordinary recommendations. They are as follows:

Before starting the actual process of ironing the pants, you need to prepare them a little from the inside. To do this, turn the product inside out, carefully and carefully handle the pockets and lining, if there is one, of course. After these steps, it remains to iron the main connecting seam of the trousers.
For further work, we need to turn the trousers out again, but this time to the front side.
We fold the legs together so that all the seams - front and back, clearly coincide. To do this, we need to put them one on one and iron them with or without wet gauze, as required by the fabric itself according to the instructions. Although, with a very wrinkled surface of the thing, the presence of a thin cotton patch is simply necessary. This will allow you to quickly cope with the task. Use extra care to iron the entire length of the garment on both outer and inner sides, applying a damp cloth barrier to each area. If it starts to dry out over time, sprinkle it with distilled water from a spray bottle. Thus, you will greatly facilitate your work and get excellent results in a short time.
Now we have, so to speak, halfway done. The most important and, for most women and men, the most difficult part remained - this is the upper body of the trousers. Be that as it may, the work must be done carefully and efficiently, otherwise the flaws will be visible to everyone around and create a very unpleasant impression of you or your husband. At this stage, there is a huge risk of endowing your treated pants with an unpleasant gloss of imprinted inner seams that are conspicuous. And in order for the thing not to shine, you just need to - just take a small pillow and put it inside the product. By lightly moving the iron over all the wrinkled areas of clothing, you can quickly get rid of annoying folds.

Detailed video instruction

How to iron the arrows on the trousers?

The last step is to smooth out the arrows on the pants. How to do this, now we will tell you. In principle, there is no secret here, many housewives probably know that darts play a huge role in this. Fold one and the second leg together and evenly relative to the darts, and then iron it through a damp cloth or gauze. In order for the hands to keep their classic shape for a long time, you can soak a cloth in vinegar and put it on a crumpled cloth and hold it under the pressure of an iron for several minutes. A small piece of soap will also be a safe option, it will allow you to fix the arrow on your pants for a long time. It is only necessary to turn the product out on the wrong side and vertically process the areas of future shooters with a remnant, then put them under the iron through gauze soaked in purified water.

Even if your eye, trained by experience, suddenly let you down, and you mowed both arrows, then the mistake must be quickly corrected in the following way: prepare a solution from a liter of water and two tablespoons of 9% vinegar. Mix everything and moisten gauze or cloth in it, and then attach to your wavy arrows on the pants from the inside out and steam with an iron. That's it, the defect has been eliminated, you can continue to practice.

When the trousers have undergone a full heat treatment, you must leave them to cool a little on the ironing board in an even position, otherwise you run the risk of canceling out your labors and efforts due to the next bruises and folds that have arisen.

Video instruction how to do it right

Vertical steaming of trousers

Many families today have appreciated the advantage and effectiveness of steaming trousers and other items vertically in a relatively short period of time. Few people pay attention to irons without a built-in function of steam generation and vertical processing of the product. And this is not in vain, because ironing pants and other delicate things quickly and efficiently is possible, unfortunately, not for every person, even with a great desire. Therefore, preference is given to this particular innovative system. The washed and dried item does not even have to be removed from the hanger. One has only to install the necessary nozzle on the vertical steamer and smoothly passing from the top of the product to its bottom, calmly and without problems straighten the crumpled fabric. It is also safe to attach the arrows to the pants. It is only necessary to place alternately the legs between the special clamps and draw vertical lines with their help on both freebies. The result will simply amaze you! Presentable appearance and beauty for you and your husband is provided not only at work, but also at any special event.

It is impossible to imagine a classic suit without perfectly ironed, straight arrows on the trousers. It is they who determine the clarity of the silhouette lines.

How can this be achieved? In order to properly iron the arrows on the trousers, you need to know some of the subtleties, without which the process will turn into hard work with dubious results.

Textile

Before you start ironing, you should clarify the type of fabric from which the trousers are sewn. The manufacturer usually indicates the composition of the fabric on the tag.

Based on this information, you can determine which mode is required for ironing a particular product:

Maximum temperature and steaming required for linen trousers.

Cotton fabrics are easier to iron, but also need the maximum iron temperature.

Woolen fabrics must be ironed exclusively through damp gauze, and fabrics with synthetic additives hardly wrinkle, therefore they do not require high temperatures and steaming.

Step-by-step instruction

Ironing trousers with straight and clear arrows is a must-have skill for any self-respecting housewife. To purchase it, you must follow a certain order of actions.

Step 1. The trousers should be inspected for stains and dirt.

Under the influence of high temperature, any speck, almost imperceptible, will cease to be such and will be fixed forever. It is a good idea to prepare in advance a white thin cloth or gauze, vinegar and a bar of soap.

Step 2. Trousers should be turned inside out and ironed, paying extra attention to the pockets, belt and lining (if any).

This will greatly facilitate further processing of the product. It will be useful to use the narrow part. The upper part of the trousers is put on it, periodically scrolled for the convenience of ironing.

Step 3. Having turned the product to the front side and taking it by the lower edges, all four seams are aligned: on each leg, the seams are folded together, then they are applied to each other, observing the alignment of the front darts of the upper part of the trousers. They must match.

Step 4. Having ironed the trousers from the inside out, the product is turned onto the front side and proceeds to the most important thing - the creation of arrows.

So that they do not turn out to be double, you need to iron not along the entire length of the leg, but iron small sections in turn. Each leg must be ironed separately.

To give the arrows durability, you need to run a piece of soap over them from the inside out, and when ironing, you need to moisten the gauze with a solution of water and vinegar (1 tablespoon of table vinegar is diluted in 250 ml of water).

If, after the end of the process, the fabric has acquired an excessive shine, that is, it is glazed, you should gently wipe these areas with gauze soaked in the same vinegar solution.

Then you should let the trousers "cool": lie down a little on a flat surface. You should not immediately put them in the closet or put them on: the warm fabric will instantly crumple and take almost the same look.

While the trousers are "lying down", let's watch a video, which shows in detail how to iron trousers with arrows at home.

Iron without gauze

It may happen that there is neither gauze at hand, nor a cloth with which to replace it. How can you do without gauze to iron your trousers with arrows?

If the iron has a steam generator, then the problem can be solved quickly and easily. If not, it is quite possible to do with thin and loose paper instead of gauze.

You cannot take a newspaper, it can leave printing ink on the product. Especially if it is light or white.