Nutrition and diet 

How to make a foil gel balloon. Foil balloons: how to inflate

Reuse foil (mylar) balloons can be a great way to create a birth tradition.

A great way to save some money on decorating your holiday. You can reuse old foil balloons. If you carefully release the air from the foil balloons and store the deflated balloons correctly, they can be reused and inflated for the next holiday. Foil (mylar) balloons equipped with a self-closing internal valve. If the walls and valve are intact, the balloon remains sealed and can be reused.

Reuse of foil air balls requires some preparatory steps: deflation and preparation for storage after the first use.

How to deflate a foil balloon

Tips and instructions

You will need:

  • Foil balloon
  • Cocktail straw

Blowing off foil balloons

You can use a cocktail straw to deflate the foil balloon. Carefully pierce the self-closing balloon valve with the tubing and push it a little deeper. Be careful! It is necessary to penetrate the ball with a tube slowly and carefully so as not to damage the valve and the walls of the foil ball. The air will start to come out of the balloon on its own, then by lightly pressing the balloon, continue to release the air until it is flat like a sheet of paper.

If you cannot squeeze out all the air, then use your mouth to remove the last drops of air from the balloon, or use a vacuum cleaner. Then remove the straw from the valve. The deflated foil balloons must be laid with paper so that they do not come into contact with each other.

Storage of foil balloons

Store foil balloons in a dry and cool place. If the balls are not covered with paper, then when the storage temperature rises, the walls of the balls can stick together and be damaged. To avoid damage to the foil balls during long-term storage, they do not need to be folded. If the balls are stored in the folded state for too long, they may crack or burst at the folds. Ideally, Foil Balloons should be stored flat and unfolded.

Re-inflating foil balloons

To re-inflate the foil balloons, you can use several methods. The most cost-effective option is to use a cocktail straw, insert it into the valve of the balloon, and inflate it with your mouth.

The second option is to use a special two-way pump. In these two versions, the air-inflated foil balloon will not fly.

If you order decoration with balloons holiday, you can order inflating foil balloons from the decorators. Decorators inflate your foil balloons with helium gas for a minimal fee.

You can also buy disposable low-pressure helium cylinders from a specialist store and inflate your own foil balloons.

It's hard to create a children's party atmosphere without balloons. Although this also applies to adults. Many special events use this design. At the same time, foil balloons are popular, in relation to which a natural question arises: how to inflate? This is especially true in cases where the holiday is arranged at home.

What is a foil balloon

The production of balls, known as foil balls, is based on the use of polyester or nylon film. The foil effect is achieved by applying metal spraying and paint. After that, blanks are cut out of them. Two identical halves are taken and connected to each other by heat sealing.

Foil balloons are filled with air or helium. The second option looks preferable, since the result is products that can truly fly. But here, too, there are some nuances:

  1. A balloon inflated with helium in a heated room loses its volume when taken out to the cold. He seems to be deflated, which is bad for his appearance.
  2. The reverse order, when the balloon is inflated with helium in the cold, and then brought into heat, leads to the fact that the product bursts.
  3. The rain "lands" the foil balloons. Moisture accumulates on their surface, which increases the weight, which presses down to the ground. After drying, the balls soar up again.

The foil ball is a cheap toy, it is reusable. You can inflate it repeatedly, if not damaged by something sharp.

A non-return valve is provided for inflation. Its petal provides a snug closure. In this case, the tie is only needed to hold the ball. A cord is tied to it. If there is no valve, the ball is sealed, which requires the use of a special tool.

Foil balloons differ in a variety of types:

  • decoration - a surface without a pattern, painted in solid colors. In shape, these are stars, zigzags, cones, circles, crescents, hearts;
  • with print - the same as for decoration, but with a printed pattern;
  • symbolic - numbers and letters with a single color at a height of up to 90 cm;
  • walkers - 3D figures fixed with weights. The action of the wind sets them in motion;
  • figures - any shapes in the form of animals, characters from cartoons, planes, ships, etc.

Inflate with air

A free way to organize a party in terms of preparing foil balloons. Assumes the use of improvised tools:

  • cocktail tube;
  • handle body;
  • pump.

Mouth

The procedure looks like this:

  1. Find the valve, which is a round hole with a silver tint.
  2. Insert cocktail tube or pen body.
  3. Exhale through the device being used. If air does not enter the ball, then straighten it and push the device deeper.
  4. Begin to slowly inflate the balloon until it acquires clear contours and becomes firm enough.
  5. Remove the fixture and tie the ball with ribbon, which must be done correctly.

Pump

There are special pumps on sale, but you can do with those that are at home, for example, a bicycle or used to inflate a mattress. The process is identical to that described above.

Inflate with helium

In this case, you will need a nozzle and a balloon containing helium. The algorithm is as follows:

  1. Put one end of the nozzle on the balloon, and insert the other into the foil balloon.
  2. Straighten the figure and exhale through the mouth through a tube to smoothly open the valve. This will exclude the possibility of damage under the pressure of helium.
  3. Open the valve on the bottle and quickly fill the balloon almost to the end. Then close the valve and start feeding helium in small portions. This procedure reduces the risk of balloon bursting.
  4. Remove the figure from the attachment and tie with braid or solder.

A helium bottle is expensive (about 3 thousand rubles per 10 liters). In this connection, it is not very reasonable to buy it when a small-scale celebration is ahead. The way out is to rent a gas cylinder (about 300 rubles).

We tie it correctly

The material of the foil ball has practically no pores, which allows it to reliably retain helium and air. The weak link is the valve through which the figure is inflated. The correct knot is needed:

  1. Fold the braid to form a loop and place it on the edge of the valve petal.
  2. Fold the petal so that the braid is inside.
  3. Fold the petal in half.
  4. Thread the free end of the tape into the loop and tighten the knot. Make another one with the remaining tip.

Conclusion

Foil balloons can maintain a festive atmosphere for a very long time. Some "live" for several days, while others - more than a month. It all depends on the weather conditions, the correct filling with gas or air and how the tie is made.

Children love balloons. With them it turns out to create a festive atmosphere, they are also used for playing. Adults love this decoration too. Foil balloons look original. They serve as an independent festive decoration. Do you need to know how to inflate foil balloons at home?

Application of balls

Foil balloons are used to decorate holidays such as birthdays, children's events, anniversaries, weddings and other celebrations. Thanks to the wide assortment, you can choose products for different events and for various room decoration themes. Foil balloons are often made in the form of multi-colored hearts, circles, holographic stars.

There is another type of balls - licensed. These include figures of animals, cartoon characters. Foil balloons include walking figures. They are the most beloved at children's parties. These products are used not only as decoration, but also to participate in fun games. Thanks to balloons in the form of Mickey Mouse and Minnie, Bugs Bunny, Winnie the Pooh and other characters, any children's party will be fun.

Product advantages

Foil balloons can fly for a long time: from 3-5 days to several weeks. Because of this excellent property, the products are used for interior decoration. Moreover, they are often combined with latex. From foil-clad products wonderful congratulatory bouquets are obtained.

Bright foil balloons come in different designs, shapes and sizes. They are very easy to print on compared to latex ones. The stores sell different shapes of balls: circles, stars, hearts, objects, animals, equipment. Some have congratulatory inscriptions and thematic drawings. Those wishing to beautifully decorate a room need to know how to inflate a foil Christmas ball or product at home for any other holiday.

Helium

This method is cheap and effective because helium is lighter than air. The balls will float from the ceiling. They can decorate any room. How to inflate a foil balloon at home with helium? It is advisable to entrust the procedure to professionals, but you can do everything at home. This requires a gas cylinder and an adapter. The procedure is performed as follows:

  1. The adapter must be put on the balloon and inserted into the balloon at the other end.
  2. The figure should be straightened for an easy and even flow of gas inside.
  3. In advance, you need to blow a little with your mouth through the tube for smooth opening of the valve. Otherwise, due to sharp helium, the product may deteriorate.
  4. Inflation must be performed until the product takes shape. Although the foil balloons are reliable, do not inflate too much, otherwise the foil may break or the seam may come loose.
  5. At the end, close the valve and tie the ponytail.

If the holiday is in a hot time, it is advisable to inflate the product a little less. In warmth, helium tends to expand, and the ball takes on the desired shape. This method is ideal for a small party. A gas cylinder has a low cost, and it is not profitable to purchase it for several balloons. You can rent a balloon. There are other ways to inflate foil balloons at home.

Air

Foil figures do not fly with air, but this option costs almost free. In this case, 2 methods apply:

  1. Inflation by mouth.
  2. By pump.

Which method to choose depends on the size of the ball. Small figures can be inflated on their own, and a pump is suitable for large ones. How to inflate foil balloons at home in two ways is described below.

Mouth inflating

This method is the simplest and most convenient. How to inflate a foil balloon with your mouth at home? This requires a cocktail tube or standard ballpoint pen. Each method has its own characteristics.

The handle should be unscrewed and the rod removed; only the main part is required. A tube or pen must be inserted into the valve of the ball and blow slowly. If you do this intensively, there is a risk of damaging the valve. If the air does not pass well, you need to push the tube further into the ball and try again.

Using the pump

How to inflate a foil balloon with air at home? For this, small pumps are used, of which there are many on sale. With these devices, the inflation process is facilitated. You need to insert a tube into the ball valve and you can inflate.

Tying a ball

Large foil balloons have self-sealing valves which must be sealed after inflation. Then the tail should be tied with a ribbon in several knots so that the air and helium remain in the balloon. Balloons filled with air can be put on a special tube, thanks to which the figure will be held.

If you inflate the balloon correctly, it will hold its shape for several weeks. Even after descent, it should not be thrown away. These methods are the answer to the question of how to inflate foil balloons at home? Even if air has escaped from the product, the shape can be returned.

The balls can be recycled so that the environment is not polluted. They are usually blown away after the holiday and stored until the next event. Although they are expensive, reuse will save you money on your next celebrations. Foil balloons are better than latex balloons, which are thrown away after the holidays.

Such products are considered safe. It should be borne in mind that the balloon filled with helium must be kept away from open fire. The deflated product must be kept away from children. Asphyxiation may occur due to improper use of these balls. The child should be able to use them, it is better to do it under the supervision of adults. The safe and correct use of balloons will bring a lot of positive emotions.

The thing is quite durable. Even if it deflates over time, you can always inflate it. This can be done in several ways. The choice depends on what exactly you are going to fill it with.

If you want to inflate the foil balloon with helium, use the special nozzle. Screw its wide part onto the neck of the bottle. Insert a special adapter into the ball valve. This valve usually looks like a small round hole. The adapter must be inserted under a transparent or translucent film covering this hole.

Blow out the valve slightly. This is necessary for him to fully open up. If it is not fully open, it may burst due to high pressure in the cylinder. When the valve opens, screw the adapter into the nozzle on the cylinder and inflate the balloon to the correct size.

If you only have a couple of balloons, there is no point in buying a helium bottle and filling them at home. It will be easier and cheaper to contact the salon where you bought them. There they can be inflated again for a small fee.


Inflate the foil balloon with air

You can inflate a foil balloon with air using a bicycle pump, cocktail tube or a ballpoint pen housing. Insert the hose from the pump or tubing into the valve, being careful to guide the tubing towards the center of the ball. Ideally, it should move inward 5-10 cm.

Make sure the valve is fully open before inflating the foil balloon. Only then begin to slowly blow in or pump in air. If you decide to use a pump, make sure that the air flow is not too high, otherwise the ball may burst. Once it is inflated to the correct size, tie it with a ribbon just above the valve. Now when the air from the foil balloon comes out again, you can inflate it again.

They inflate in the same way. Each element in them is inflated separately and has its own valve for this. Just keep in mind that in order for the figure to "walk", its upper part must be filled with helium, and the lower one - with air.

More precisely, how to reuse a balloon. But, unfortunately, such savings do not apply to all balloons, but only foil balloons. - these are balls made of foil film. These balls are based on a nylon film coated with a continuous metal layer. Compared to latex, it is a much stronger and more durable material. They are diverse in shape, color and size - voluminous hearts shining in the sun, stars and cars, cubes and pyramids, little balls, and,. These balloons are perfect for any occasion. Therefore, it is on foil balloons that you can significantly save money and even come up with a whole tradition of decorating a room.

1. Check the integrity of the ball after the holiday.

Foil balloons have a self-closing inner valve. Check the ball walls and valve for damage. If the ball remains sealed, then it can be safely reused.

2. How to deflate a foil balloon.

The answer to the question "how to blow off a foil balloon" is simple - use a cocktail straw. Carefully pierce the self-closing balloon valve with the tubing and push it a little deeper. Be careful! It is necessary to penetrate the ball with a tube slowly and carefully so as not to damage the valve and the walls of the foil ball. The air will begin to come out of the balloon on its own, then by lightly pressing the balloon, continue to release the air until it becomes flat like a sheet of paper. If, nevertheless, a small amount of air remains in the ball, then use a vacuum cleaner at low power or a hand pump. Then remove the straw from the valve.

3. Storage of the foil ball.

Store foil balloons in a cool, dry place out of reach of children. If you are going to store several foil balls, be sure to put paper between them. Otherwise, when the storage temperature rises, the walls of the balls may stick together and be damaged. There is no need to fold them or try to wrap them in a "tube" - they can crack and break at the folds.

4. Re-inflation of foil balloons.

To re-inflate the foil balloons, you can use several methods. Inflate it with the same cocktail straw with air or order the balloon with helium. In the first case, the inflation process is simple, fast and economical. But, he will not be able to fly. In the second case, the helium will lift the foil balloon up to the ceiling and last 2-3 weeks. You can also buy disposable low pressure cylinders for storing helium and independently inflate your foil balloons.

When inflating a foil balloon with helium, follow safety instructions. If you have any questions, it is better to contact the professionals!