Ripped jeans how to make holes. Jeans with holes in the bottom. What tools are needed for this

02.05.2019

Ripped jeans have long been a fashion trend. You can easily see similar clothes from the most popular brands in the leading catalogs. Anyone can buy new pants with a hole or make one themselves already in old things!

It is now that you do not need to throw away your favorite denim pants, you just need to follow a few simple steps. The text of this article contains the most relevant information on how to make holes in jeans best.

“Measure seven times, cut once” - this is the proverb that must be followed when choosing a place for a future cut. Remember that all actions will be irreversible! The most common places for holes in pants are:

Back and front pockets.
Lap.
Hip.

It is very important not to overdo it! You should look sophisticated, not provocative. Try not to put many holes and cuts in one place. Much depends on the specific style of the pants. For example, a small hole in the knees is best done on dark, skinny jeans.

Preparatory stage

It is very easy to change the appearance of trousers, you will have enough ordinary improvised means. Grab your old and worn pants and follow a few simple steps.

Fitting, selection and designation of a place for a hole

First of all, you should try on old things. Thus, you will be able to estimate exactly how the pants will look after the makeover. Think in advance about what specific result you want to achieve. Much depends on the quality of the material, which reacts differently to cuts and damage.

The hole is capable of deforming and enlarging. When trying on, make sure where the cuts will be. Consider not only the peculiarities of your anthropometric data, but also the density of the material itself. Mark the area of future holes with white chalk, as it is clearly visible on any background.

Preparation of the necessary tools and materials

There are several ways to cut your jeans. To do this, you must take the following items at hand:

Large and nail scissors.
A brush.
Sandpaper.
Needle and tweezers.
Stationery knife (alternative - blade).
Material that can be put under the leg.

Different ways to make holes in jeans (with instructions)

It is very important to choose the correct solution to the problem. To implement the first method, you need to follow the exact algorithm of actions:

First, you must place a small piece of cardboard under the target area.
Make two neat cuts that should be parallel to the white threads.
Take a pair of scissors, and then carefully pull out any obstructing threads (alternately denim and white).

The second method is slightly different. You are also advised to place a plank and cross-cut. Cut the longitudinal threads with a blade. You also need to do the processing of the edges. The third way is best done with a knife. It is suitable for those who want to radically change the look of jeans. You must make several straight cuts at once. You can also use a large, handled blade that has teeth. Slip the jeans over yourself, pull them back, carefully make many horizontal cuts in one place, and then wash your pants.

Edging holes

After you've made a new hole, don't forget to finish off the edges. Thus, all new elements will look sophisticated and stylish. You have to create the effect that the product was purchased in a store. Take sandpaper and then gently rub off the edges. After a while, throw the jeans into the washing machine, as the hole will widen slightly after the first wash. Using sandpaper and repeat the processing procedure again.

How to make special holes with your own hands

Holes in jeans are a great chance to express yourself. You can accomplish them in various ways. Make changes really with scissors, a razor or even a razor blade. The execution technique depends on where exactly you want to make the cut:

On the knees

A hole in this place is very easy to create, it spreads out instantly. Do all actions carefully and delicately. You must wear denim pants and then put a small dot in the center of the knee. The markings should be in the shape of an eye. The fabric must be cut strictly according to the markings applied.

Note! Ordinary sandpaper is not enough. Wet the hole area, roll up some fabric in the middle, and then secure it with pins. Jeans should dry like this. You can also add small abrasions later.

Big size

Large holes are best done in only one specific place; there should not be many of them. These incisions are most often made in the knee or buttocks area. In the process of creating, it is enough to use ordinary scissors. Cross-cut or cut the fabric along all four edges.

Round

Round cuts are not very common. They are done on the buttocks or hips. The oval or circle should be drawn with chalk. It is best to take a regular lid and then circle it. Make cuts and then use tweezers to separate the threads.

The peculiarity of holes on different jeans

Much depends on the type of denim. On tight jeans, the hole size you would use for wide pants will not work. Also, a lot depends on the color of the fabric.

Black jeans

These clothes look best with small holes around the knees. Regular black pants are faceless and too simple. Even a small cut will make you look more stylish and modern. The width and location of the cut is best matched to the material.

Stretch jeans

Pants made of this kind of fabric have several features. Remember that the stretch stretches very well. The holes made on tight and tight denim trousers will disperse over time. Do not make a large cut, as it will expand to a large size in the future.

How to make unusual holes (decorating holes with lace)

Surprising those around you with regular cutouts on your pants can be quite difficult. An excellent assistant in such cases will be some of the tools at hand. You will need a tape of guipure, which needs to be assembled into a ruffle. Alternatively, you can take lace fabric and sew it on the back of your jeans. This way the lace will move when walking.

How to scuff jeans at home

Many men and women are not limited to just holes. Carefully executed abrasions are an important element of the image of every young man. It is very simple to execute them; a file, a kitchen grater or a manicure file will be enough for you. It is your responsibility to treat the target tissue with sharp, rhythmic movements.

Fashion dictates its own rules every season. New trends in magazines are forcing girls to spend a lot of money and nerves to match the fashion. But there are things that change from year to year and do not lose their relevance. These include ripped jeans. Despite their shabby appearance, the cost in the store is impressive. After all, they make the appearance of girls fashionable and daring. It is also worth noting that ripped jeans are worn not only by the fairer sex, but also by men.

What to do if the dream of torn jeans does not leave, and there are not enough funds for the purchase. The solution is very simple - it is to make holes and scuffs with your own hands. This article provides tips and techniques for creating your dream jeans.

How to make holes in jeans - all ways

How to make ripped jeans with a pumice stone

The pumice stone will provide stylish fading that will suit people hesitating to wear ripped jeans. You need to take a pumice stone and a board less than the width of the leg. Place it inside, this is done in order not to damage the back of the fabric. Use a pumice stone to rub the places where scuffs are needed. Pre-mark with chalk. The scuffs look spectacular not only on the jeans themselves, but also on the pockets.

How to make holes in jeans with a grater

This method is used for frizz and is more suitable for fading jeans. Do not apply too much pressure on the jeans with a grater, the fabric may tear. Such frailty will look beautiful if the jeans are additionally rubbed with sandpaper. Using it, you get the effect of worn jeans.

How to make ripped jeans with a clerical knife

First, be sure to put a plank in the leg, otherwise the knife will cut through the fabric on the other side, and will also scratch the surface on which the jeans lie. Having marked the places for the slots with chalk, the cuts are carefully made with a knife. Do not make them very even. Curved lines will give a more stylish and natural look. There are white threads inside the fabric, they can be tousled, partially pulled out. You can also remove them completely, and scrape the edges of the hole with a pumice stone. If you want a neater look, then the threads do not need to be pulled out. In order for them not to come out during washing, you need to glue the inside with interlining, and sew the edges. You can also cut various shapes with a knife. This will emphasize the girl's personality.

How to make holes in jeans using a razor blade

Be very careful when using this method as it can cut your fingers severely. A plank is placed inside the leg. Next, the blade makes several cuts across the leg. Do not cut up to the seams of the jeans. The distance between the lines should not be too small, this will give a more beautiful look. Next, pull out the threads and fray the edges of the lines.

The fringe on the edges of the legs will help to add originality. You can make it with a pumice stone or a grater.
If it is decided to make holes of various shapes, then they must be glued with non-woven fabric on the back side. Otherwise, the pattern will lose shape over time during washing.
Jeans with bleached areas and scuffs look stylish and effective. This is done very easily with bleach. It needs to be poured over the place where the hole or scuff will be made.
It is better to work with damp jeans, as dust and small particles of fabric are formed. They are difficult to remove from the carpet.
You can make decor using paper clips, stripes, rivets. Such jeans will definitely not leave anyone indifferent.
Jewelry made of aged metal and natural stones will add vintage style.
You can decorate the hole with a beautiful colored fabric or lace, sewing it on the inside of the leg.
Jeans look very beautiful when the cuts are trimmed with zigzag colored threads.
Ripped jeans should only be washed with your hands. The machine will tear them apart even more, making it look casual.

The most important rule here is not to overdo it with clothes. Otherwise, you can get the opposite effect, and outwardly it will look cheap and vulgar.

If jeans have a lot of holes, scuffs, then the top should be modest and monochromatic. A plain T-shirt, turtleneck, sweater will do. Will look stylish with sneakers or sneakers.

If jeans are embroidered with natural stones and lace fabric, then they can be worn with a blouse and high-heeled shoes. If the stones are monochromatic and calm tones, then the top can be bright and combined with color.

Ripped jeans with a leather jacket or biker jacket look stylish and bold.

Open-toed shoes, as well as accessories in the form of beads and a belt will add elegance.

Equal jeans are always worn on a naked body; you should never wear tights or socks under the bottom.

Jeans look stylish and harmonious with ballet shoes.

Pairing ripped jeans with rock and grunge outfits is daring.

Using these tips, you can make your own vintage, stylish jeans. Old unnecessary jeans will again delight. This will save the budget, and the result will not be found anywhere else, which will definitely make the image individual.

Holes on the clothes "hint" to the owner that it is time to throw the thing away. But with jeans the opposite is true. Modern fashion dictates its own conditions, and now slight wear and even huge holes are not the result of prolonged wear. Leaky jeans today are a stylish and expensive piece of clothing that is sure to be present in the wardrobe of every fashionista. They can be combined with almost any item and are suitable for almost any age. To become the owner of fashionable jeans, you do not have to spend money, since you can make holes in jeans with your own hands at home.

Ways to make holes and scuffs on jeans at home

Before making scuffs or holes on jeans, you need to take into account the density and characteristics of the fabric. For example, stretch material is characterized by deformations, so holes can change their shape under strong tension and look unattractive.

For reference! After creating holes in your jeans, it is a good idea to wash them as this will help give them a more worn look. Spray bleach with bleach will help age the jeans.

In addition, you will have to make various efforts when punching holes in thin and dense material.

The location of the holes on jeans depends on the features of the figure of their owner. Owners of short legs should make oblong holes on jeans in order to visually lengthen the limbs. Accordingly, girls with long legs can also afford transverse holes on their jeans. It is also undesirable to make cuts in those places that you should not pay attention to. For example, if you make a hole in full thighs, they will attract the eye.

Method 1: classic version

There are several ways to make beautiful holes on jeans, but the simplest is the classic one. Using this method, you can get a fashionable thing in the style of rock. It is advisable to use skinny jeans, as such holes look best on them.

You can make ripped jeans in the following way:

You can make holes in both legs of the jeans, or just one. It is also perfectly acceptable to make cuts in the back. It is enough to show imagination and a stylish model of jeans will be ready.

Method 2: holes with threads

If you wish, you can make holes with cross threads on the jeans. They do not stick out in all directions, they look nice and neat. Jeans with such holes are more suitable for the spring and autumn seasons.

Step-by-step instructions with a photo will help to make holes in jeans with your own hands at home:

Lay the jeans on a hard surface and mark with chalk or soap, indicating the width of the future cut.
Make two cuts in the fabric with a clerical knife, they should be parallel to each other.
Using tweezers, carefully pull out the threads, being careful not to stretch or break them.
Remove the blue threads with tweezers.

After this procedure, neat holes with white threads will remain on the jeans. It is easier for beginners to make them rectangular, but their shape may be different. As the experience grows, it will be possible to make triangular or round cuts, as well as give them the shape of a heart.

On a note! You can combine large holes with dotted jeans. To make a small hole, you need to pierce the fabric with scissors, making an incision of about 1 cm, and then, using a needle, draw out the threads.

Method 3: sloppy holes on jeans

Unlike the previous method, this master class describes how to make sloppy holes in jeans. This style is suitable for active girls. The threads sticking out in all directions make jeans with holes casual.

Step-by-step instructions with a photo will help you make holes on your jeans at home:

Before starting work, beginners need to outline the places of the cuts with soap or chalk. For more experienced "masters" who can easily identify these areas by eye, you can skip this point.

Make horizontal holes in the jeans legs. To do this, use a clerical knife or a kitchen knife. There should be cuts of different lengths so that a complex-shaped hole will form in the future.

From the strips obtained, it is necessary to draw out white threads, and it is not necessary to do this carefully. Rather, on the contrary, you need to stretch and tear them, too without ceremony.

It is also important to pay attention to the places where the blue threads are left. They are unnecessary, so you can get rid of them without regret.

As a result, you will get such unusual jeans with sloppy holes. Actually, these cuts look on "bananas" and boyfriends.

Method 4: frayed holes on jeans

You don't have to make big holes in your jeans. Frayed pants are also in vogue, so you don't have to go through cuts to be trendy.

To make holes or scuffs on jeans using this method, you need to do the following:

Put on jeans on yourself to see which places are best for scuffing. Then they need to be marked using chalk, soap or pencil.

On a note! It is not recommended to make holes or scuffs in the knees, otherwise the slots will tear and become larger during walking, which will ruin the appearance of the jeans. Therefore, you will have to choose a different place. For example, just above the knee.

When the place for the scuffs has been chosen, place the jeans on a hard surface. It is also advisable to put some hard object in the leg in the area of the cut. It can be a book, cardboard, etc. It is worth paying special attention to this, otherwise there is a possibility of ruining the back of the leg, which will cause the jeans to be thrown away.
Scuffs can be done with a float, sandpaper, or pumice stone. First, you need to make small cuts with a knife, and then rub with the selected object in the selected place of wear. To make the edges corrugated, it is enough to scrape there with scissors.

On a note! If you want to create slight fading on your jeans, you don't need to use scissors. Also, do not pre-make cuts with a knife, you can simply rub lightly with a grater or sandpaper in the place of expected wear.

Method 5: big holes on jeans

Jeans with large holes are a summer option. In some models, the holes are so large that most of the legs are left open. Since we are talking about a summer version of clothing, these jeans should be made of lightweight fabric.

It is very easy to make big holes in jeans using this method. It is enough to follow a few simple steps:

Despite the ease of implementation, fashionable jeans are obtained. If you wish, you can make several holes, give them a different shape, cut them out to a larger size. It is worth turning on imagination in order to find an interesting thing.

Video: how to properly make holes on jeans with your own hands

After reviewing the video tutorials, where each action is clearly shown, making holes in jeans is even easier. This is especially necessary for beginners when there is not enough experience in this type of skill.

Despite the fact that making holes is very simple, there are some tips that will help you not to ruin the thing, but to transform old jeans into a fashionable and stylish model. The main thing is that there is no need to rush to make large cuts, since they can always be increased if desired, but it is unlikely that it will be possible to reduce them. In addition, holes become larger during wearing and washing.

You can see how to correctly make holes on jeans with your own hands in the video.

Jeans with holes and scuffs have been at their peak for several seasons. Torn models are presented in the collections of eminent designers, in such trousers stars appear, "perforated" trousers flooded the streets. Don't you have them in your wardrobe yet? It's time to rectify the situation! But don't rush to the store. Ragged boyfriends and skinny ones are not cheap: it's a trend for a reason. There is no point in overpaying if there are pants in the closet that you can "upgrade" with your own hands.

Ripped jeans are not a new trend. Rather, it is proof that fashion is cyclical. Pants with holes were the first to be worn by hippies back in the 60s. With deliberately careless clothes, the “flower children” wanted to emphasize their protest against the generally accepted rules. The trend was picked up by rock stars: in the 70s, every self-respecting rocker wore ripped jeans, thereby challenging society. Naturally, at that time, ripped jeans were not on sale: the rebels simply sewed up their trousers to the holes and did not sew them up - that was the whole "fashionable" secret.

That all changed when modern designers began to look for inspiration in the informal styles of yesteryear. So, the catwalks, and then the streets were filled with "perforated" jeans.

Holes in the pants add a touch of playfulness, sexuality, freedom to the image of the fair sex. Men's frayed jeans are associated with rebellion. The trend, which fashion critics predicted transience, has not given up its positions for three seasons, and it seems that it will not give up soon.

Choice of model, fabric and color

Want to replenish your wardrobe with trendy ripped jeans? Go ... no, no, not to the store, but to revise your closet. Surely there are denim pants that you do not wear because the model is outdated or seems too boring. Or maybe you have favorite jeans that are frayed, but you were sorry to throw them away? Finally, pity for old things paid off: give your trousers a new life.

You can rip any pants. But your task is to arrange everything so that no one would suspect "amateur performance". This is only possible if the "correct" basis is chosen. Which jeans are better to rip?

Model. The flight of designer imagination knows no bounds: the couturier is "ripped" by boyfriend jeans, mom jeans, and skinny jeans. For home experiments, it is better to choose pants that are not too wide and not too tight: in the first case, the torn areas will simply get lost, in the second, the holes will look unaesthetic.
Textile. For the experiment, fit classic denim pants - moderately dense. If you want to "upgrade" elastic jeggings with holes, then it is better to give up this idea. The result is unlikely to impress: if the base of the pants is made of elastane, you can make holes, but they will not look beautiful.
Colour. It is better to tear jeans classics - blue or blue denim. The contrast of the threads creates a stunning effect: even old trousers will look stylish.

Have you thrown away all your old jeans and there is nothing to carry out fashion experiments on? Take a look at the nearest second-hand and pick up pants there, from which you can make "candy". Do you like used clothes? Then buy the simplest jeans at a regular store and turn them into trendy ones. The savings will turn out to be significant: usually torn models cost twice or even three times more than those without holes.

4 ways to design holes in your pants

Decide on the shape of the holes and their location. Of course, a lot depends on your imagination: do not be afraid to show it. However, you should first look for inspiration, so as not to end up with pants, which you can only walk in at the dacha, where no one can see. Ideas can be found on the Internet. By examining the star bows, you'll understand what the perfect ripped jeans should look like.

You can run into a couple of stores and try on the "perforated" models that are sold there. A boutique raid will also give you an idea of what your jeans should ultimately look like. Remember, beauty lies in simplicity. Ideally - a couple of holes or one large, a couple of frayed areas. Ridiculous - “solid hole” jeans or pants that reveal areas of the body that are usually hidden. In short, do not overdo it.

Stylish holes with white threads

What you need:

a piece of plywood or thick cardboard;
utility knife or sharp blade;
tweezers.

How to do

Mark with chalk the future "perforated" areas.
Lay the jeans on a flat surface, place a piece of cardboard or plywood under the cut. This is protection against through holes.
Using a utility knife, make several horizontal cuts of the same size in the outlined area. They should be parallel to each other. With a knife you need to lead along the threads located across.
Pull out the blue threads with tweezers. The white crossbars should remain: they will nicely cover the hole.
Carefully cut off the white threads that are sticking out. You can cut off some of the white threads to make the gap larger.

A pumice stone will help to hide traces of "creativity": rub it around the edges. To make the holes look stylish, bleach the fabric around them. You can use bleach or any commercial bleach to do this. Then wash your jeans as usual.

Sloppy holes in grunge style

What you need:

plank or plywood;
stationery knife.

How to do

Place a piece of plywood inside the leg. Use a utility knife to make several parallel cuts. They should be located close to each other.
Gently walk the knife between the cuts, peeling off the transverse threads and freeing the longitudinal threads.
Trim (or simply tear off) some of the longitudinal threads from one end for the most casual effect. The grunge jeans are ready!

Don't try to make the cuts pretty if you want to end up with a grunge-style model. No wonder this style is called a rebellion against glamor: deliberate negligence is very much welcomed. Jeans should look like they've been torn from long wear, and you don't care.

Hole fragments

What you need:

chalk or pencil;
scissors;
tweezers;
scallop;
bleach.

How to do

Spread your jeans on a flat surface. Mark with chalk or pencil the fragment that will be "empty".
Carefully cut out the marked section.
Walk along the border of the fragment with tweezers, removing the threads. Fluff the edges with a comb.
Dip a cotton pad in the bleach and blot the edges of the cut section. Then wash your jeans.

"Voids" should not be placed on the knees, behind and too close to the waist. If you decide to cut a rectangle on the leg, then it is better not to make any more conspicuous holes on it, otherwise the jeans will look vulgar. But scuffs - you can.

Torn knees

What you need:

chalk or pencil;
stationery knife;
grater.

How to do

Put on jeans. Mark with chalk or pencil a “knee” line that will become the cut.
Take off your jeans and carefully cut along the marked line.
Rub the slots. Wash the jeans, which will make the cuts a little tousled, giving a “just torn” effect.

If black denim trousers are gathering dust in the closet, it's time to get them out and turn them into trendy ones - cut in the “knee” area. This is a squeak of fashion for several seasons in a row. Not only women's trousers are "upgraded" with neat holes on the knee: the guys also liked this trend.

How to create a scuffed effect

Ripped jeans are an option for daring fashionistas and fashionistas. Even a relaxed look with perforated pants carries a bold message. If you are not ready to "rebel", but also do not want to lag behind fashion, try a less flashy (but no less stylish) version of the "upgrade" - wipe your jeans. The scuffs are not as conspicuous as the holes, but this can be done from old or just boring trendy trousers. All you need is sandpaper or pumice, and a backing pad so you don't wipe your pants through. Proceed in four steps.

Get it wet. You need to wet the areas in which scuffs will be located. This will enhance the effect.
Install the backing. Place a piece of plywood, a board, or heavy cardboard between the two parts of the leg.
Rub with pumice stone or sandpaper... Until you get the desired result.
Wash your pants. And wear them for a couple of days in a row - the effect will increase.

If the denim is too tight, then a pumice stone will help to "age" the jeans. Take the most common one. "Sandpaper" will have to work longer, but the result is indistinguishable from factory scuffs. It is better to use fine-grained sandpaper and not overdo it if holes in your pants are not part of your plans.

3 more trending ideas

Although ripped and frayed jeans have been at their peak for several seasons, trends are changing. Want to keep up with the fashion world? Complete your ripped pants with trendy touches.

Create a fringe. A disheveled bottom to complement the holes in jeans is a new trend that resonated with fashionistas. It is not difficult to copy a trend at home: you need to rip off the fold of the trousers with a blade and draw out the transverse threads with a needle. This is how you can transform old denim shorts: nothing fancy, but it looks fresh.
Decorate the holes with lace. Have you dreamed of ripped jeans for a long time, but still can't dare to bare your knees? Feel free to rip your old trousers! Large holes can be bridged with lace - stylish and sexy. You can alternate between "naked" holes and "lace", make scuffs and fringes. The main thing is not to overdo it: everything will immediately look inappropriate.
Wear mesh tights under your ripped jeans. This trend clearly shows how changeable everything is in the world of fashion. Until recently, a "fishing net" on the legs was considered vulgar and a sign of bad taste, but as soon as models put on mesh tights under ripped jeans, everyone around them lost their heads from such a decision. Do you want to be known as a real fashionista? Punch big holes in your jeans, put on mesh, and voila! The only condition: do not make many holes, otherwise it will be difficult to get rid of the notes of vulgarity in the image. Make one or two big rips, pull the tights over the belt so that they protrude from under the jeans - a stylish bow is ready!

It's really easy to transform your pants. It is much more difficult to correctly combine torn pants with clothes and shoes. It is believed that perforated models can be worn with anything (with boats and a jacket, with plain T-shirts and loafers, with a vest and white sneakers), but on some they look stylish, on others - ridiculous. Show your imagination, be inspired by the bows of the stars, pay attention to street fashionistas - and you will be able to harmoniously fit ripped jeans into your wardrobe.

Jeans with holes will help you stand out from the crowd, adding extravagance to the feminine image and bringing something crazy into your life. However, ripped jeans are also suitable for men - thus, you add a certain brutality to your appearance. Just do not rush to buy a new thing right away, you can easily make holes yourself.

It is best to start with small holes - if necessary, then it is easy to expand them.

If you make big holes on your jeans right away, you will have to make large cuts, which look ugly. For new jeans to be trendy and stylish, neatness is still needed.

Getting Started

Spread your jeans on a table or on the floor so that the surface is level. Place cardboard or other thick paper on the back. Take a paper knife and visually mark where the holes will be appropriate. It is best if the holes are where you want to expose your body, emphasizing the dignity of the figure.
Make cross cuts at the frequency you want. Threads will appear around these cuts that can be removed, but then the appearance of your jeans will become quite peculiar. It will become stylish and beautiful if you remove only the transverse threads. Very small threads are also removed: they can ruin the appearance of jeans
You can make the holes more neat if you arm yourself with a needle, pulling out one thread at a time, or, if you want to speed up the process, with a blade. Then, after you have made small cuts, just wash your jeans in the washing machine. The edges of the holes will become a little disheveled, with a beautiful fringe

Do not be afraid to experiment: as a last resort, you can always put a patch on a failed hole or make shorts out of jeans.

Ripped jeans: 25 stylish looks

More details

On the Internet, you can often find tips to use a pumice stone or sandpaper. But in this case, it will not only be difficult for you, but the result may not be at all what you expected. These methods will come in handy if you need frayed jeans.

It is advisable to determine the angle of the notch and pay attention to the white threads. Typically, jeans have white threads parallel to the floor. It is best if you bleach the jeans in these areas before making the slits.

The main thing is to pull out dark threads around the hole, not white threads.

It is better to thin out the threads after you have completed all the steps described above. The main thing is to pull out only dark threads. If you want to give the hole a certain shape, for example with a heart, then it is advisable to glue the edges from the wrong side with a non-woven fabric. You can also fix the edges in another way, for example, by sewing them or manually stitching them in a zigzag. This is done so that the hole does not lose its shape during the washing process. Don't forget to fringe if you're making holes in your shorts. In this case, it is advisable to make a fringe along the bottom, so that the look is complete.