Tie the laces with a ladder. Double color lacing. Double helix option

16.06.2019

When the look of the shoe gets boring, you can freshen it up with the help of the original lacing. Today there are many ways to tie the laces beautifully on sneakers, boots or other shoes that are easy to braid yourself.

Ladder

A beautiful way to tie your shoelaces called "stairs" will look spectacular on various types of sneakers. The lacing is clearly visible in the silhouette of the stairs. To weave it, you need to follow these steps:

From the inside, pull the lace through the bottom holes, pull the ends up to form two identical pieces: A (orange) and B (red).
Pass each of them through the hole from the outside opposite.
Interlace so B is above A and the two halves are under the sides.
Walk in the same way to the upper holes on the shoe.
Finish the lacing by tying a nice, tight bow.

This beautiful lacing is difficult to tighten and is very sturdy. Often these lace-tying methods are used for rollerblades and skates. In appearance, it resembles a large zipper:

Pass the string through the bottom holes from the inside and pull up at both ends, you should get two identical parts.
Pull both halves under the loop, interlace so that B is above A.
Next, pull each part through the second holes from the bottom, then weave again, as in the previous step.
Repeat steps 2 and 3 up to the outermost holes on the shoe.
Tie a bow at the end to secure this beautiful weave.

Decorative lacing that looks especially good on high boots or boots. Often this method of tying shoelaces is practiced with contrasting ribbons. In order not to get confused, carefully follow the proposed scheme:

Pass the ends of the lace (eglets) down from the outside through the second holes from the top, two equal parts should form.
Interlace them so that A is above B.
Pass each half through the fourth hole from the top from the outside.
Interlace both parts again, only so that half of B is above A.
Pass both parts from the outside into the extreme lower ones, then into the second holes from the bottom from the inside.
Finally, pull each half into the top empty holes, first the third and then the first.
Tie a tight, pretty bow to keep the laces from coming loose.

Reverse loop

A creative way of lacing that can be played with different colors. If you have boots with an odd number of holes, then in this case you will need beautiful laces of different lengths:

Pass the egglets from the inside through the bottom holes, pull up, make two equal lengths.
Weave both halves as shown in the photo, then each part of the lace should be located only on one side of the sneaker.
Work up to the top by threading each hole from the inner side, weaving both sides at the same time (point 2).
After finishing weaving, tie a beautiful bow.

Saw teeth

As the name suggests, lacing looks like saw teeth. On the opposite shoe, for showiness, you can make a mirror image of the weave or lace up in one way:

Pass the lace through the bottom holes from the outside and line up both pieces.
Pull A to the outside of the second from the bottom, and then through the outside of the second hole opposite.
Pull half of B diagonally under A, pass through the third hole from the bottom from the inside, then into the third hole from the outside opposite.
Walk to the very top of the shoe, applying steps 3 to half A and steps 2 to B.
Finish this pretty lacing by tying a tight bow.

Unusual interweaving "mishmash" will suit lovers of original decor. The lacing resembles a series of rhombuses with elongated edges. To tie your shoelaces this way, follow the instructions:

Pass the Eglets through the bottom holes from the inside, pull up, align both parts.
Weave so that B is on A.
Pass both eglets through the fourth holes from the bottom from the outside, then into the third from the bottom from the inner side.
Repeat steps 2 and 3 all the way to the top of the shoe.
The ends can be tied with a beautiful bow or hidden in a boot.

The method of tying shoelaces called "twisting" is performed with additional knots, which increases the strength of the weave and improves its appearance. These types of shoe lacing are also ideal for inline skates and ski boots:

Thread the lace through the bottom holes from the inside, pull on the ends, align both parts.
Weave them together (make a full turn).
Pass each part into the second holes from the bottom from the inside.
Continue steps 2 and 3 until you reach the top of the shoe.
Finish this beautiful lacing method by tying a tight bow.

Net

Sophisticated but beautiful lacing of sneakers, which is very popular due to its decorative effect. To simplify weaving, you can first thread one end, then pass the other through the mesh. This method can only be tied on boots with 6 pairs of holes or more:

Pull the flat lace Eglets from the inside through the bottom holes, pull on both ends, align the pieces.
Bind so that half of A is over B, then thread each hole through the fourth holes from the outside from the outside.
Interlace the parts again (step 2), then pass through the second holes from the bottom from the outside.
Pass the egglets through the top holes from the inside, tie a nice bow.

Beautiful and original two-tone lacing looks good on sneakers. The only negative is the presence of a node. To get rid of it, you can carefully sew or glue parts of the laces:

Prepare two laces of different colors, for example orange (part A) and red (part B), while B should be 25-30% longer.
Tie both laces tightly, carefully trim the ponytails.
Pull B starting from the bottom right side to the top through the holes as shown in the photo.
Starting from the second hole on the bottom right side, follow the same steps as in step 3 in relation to A.
Tie the ends with a bow to complete this beautiful lacing.

This type of lacing is based on the "mesh", only for weaving it is used instead of a thick and flat lace thin and round. Thanks to this, gaps are formed between the parts, and a so-called lattice is obtained:

Pull the thin round lace egglets from the inside through the bottom holes, pull on the ends, align the pieces.
Bind so that half of A is over B, then thread each hole through the fourth holes from the bottom from the outside.
Pass both Eglets through the fifth holes from the bottom from the inside opposite.
Interlace the parts again (point 2), then pass through the second holes from the bottom from the outside.
Pass both halves through the third holes from the bottom on the inside opposite.
Re-weave, following the structure of the previous binding.
Thread the egglets through the top holes from the inside.
Finish this off with a nice bow.

Video

Often, when buying sports shoes, when we wear them later, we repeatedly think about how to lace up sneakers beautifully. And often the matter is not even in beauty, but in the convenience or in the features of the foot of the person who intends to wear them.

Why are sneakers needed?

The main purpose of this type of footwear is directly focused in its definition.

After all, sneakers are usually referred to as sports shoes. Many athletes prefer to wear only them to training and their performances. And modern youth, as well as children and their parents, have long appreciated the convenience of sneakers and must have this look in their shoe arsenal. It is important to know that the comfort when wearing sneakers largely depends not only on the shape, the material from which they are sewn, the quality of tailoring, but also on the lacing. It would seem that this aspect should be in the very last place, but most experienced athletes know that it is thanks to him that it is possible to remove excess load from the foot.

Why do sneakers need lacing?

I would like to note right away for very curious people that there are various ways of lacing sneakers, and there are already more than 43 thousand of them. The final counting is carried out by the Australian Jan Figgen, who collects these methods. But in his book, it is noted that in this case we are talking specifically about those sneakers that have 6 standard lacing holes. Recently, orthopedists and doctors around the world have argued that it is precisely the methods of lacing sneakers that are individually selected for him that can correct an incorrect gait and make it more comfortable for the owner of sports shoes. At the same time, coaches in any sport are tired of repeating one simple truth - well-laced sneakers will not only make it easier for athletes to train, but will certainly lead to a long-awaited victory. For example, those involved in triathlon need a type of lacing that instantly tightens or relaxes the shoes, thus saving the right amount of time. Or, cyclists are advised to leave laces on one side of their shoes as they do not interfere with the ride.

Basic rules for lacing

It turns out that in order to give a more complete answer to the question of how to properly lace up sneakers, you need to know a few additional tricks:

Types of sneaker lacing

There are a huge number of them. It all depends on whether you will use a simple criss-cross or additional knots when lacing. And also the type of laces and their color affect the way of lacing. For example, there are:

nylon or synthetic laces - they are the most durable, look great on sports shoes and retain their appearance for a long time, but at the same time they can be easily untied;
laces made of natural materials, say, cotton, leather, jute - of course, they are durable, but outwardly not so attractive;
round and flat laces are distinguished in shape; it is natural that flat ones are more firmly tied, but round ones look beautiful.

You can also divide the laces according to their length, for example, 20 or 40 cm.

The main thing is to understand that the methods of lacing sneakers differ from each other, depending on their purpose, that is, it may be:

beautiful knotting - mainly when sneakers are worn not under sportswear, but, say, to a dress or skirt;
correct tying when it comes to health, and the main purpose of lacing in this case is the comfort of the foot in the shoe;
non-standard tying - used by modern youth.

Standard sneaker laces

We all know how to tie shoelaces, but rarely does any of us think about this process, usually everything happens automatically. How beautiful it is to lace up sneakers, so that the shoes do not look remarkable, but usually, and it was quite comfortable to walk in them. These options include the following:

Atypical sneaker lacing

Typically used on youth athletic shoes, two colors of laces are used. The process itself is very laborious, but the result looks just amazing. Some of the options below will tell you how to lace up your sneakers in an original way, but remember that there are a great many of them, and this is just a small part:

Check lacing - as an option, used by young people when it is necessary for the inscription on the tongue of the sneaker to be most noticeable. It is easy to do, but it is hard to tighten: the laces are threaded into the upper holes on both sides, then two holes are passed, the laces are crossed, and passed into the third holes. They are passed from the inside back one hole, go up, and the procedure is repeated.
Cobweb lacing: looks very nice, leaves short laces at the end. The meaning is as follows: the laces are threaded into the upper holes on both sides, then two holes are passed, crossed and go out into the third holes. Then the laces from the inside come out back through two holes. So the procedure is repeated one more time, and the laces are brought out into the last holes.
Lacing in the form of a reverse loop: the plus is beauty, and the minus is the wear of the laces and the fact that all the lacing eventually shifts to one side. The laces are threaded into the upper holes from both ends, then upward in a spiral, while intertwining with each other.

Correct lacing of sneakers

How to lace up the laces on sneakers so that after a long walk you feel good, and the process of movement itself brought only benefit and joy? Of course, the answer to this question is purely individual. After all, it all depends on whether there are painful fate on the legs, whether the heel sags, whether the foot hurts. In this case, it would be best to contact an experienced trainer or a competent doctor who can suggest the most comfortable ways to lace up sneakers specifically for you.

Beautiful ways to lacing sneakers

Let's not forget that this type of footwear has been very popular lately. And it has become fashionable to wear them not only with sportswear, but also with dresses, trousers, long and short skirts and many other options for clothing. Therefore, the question of how to lace up sneakers beautifully has become very relevant. Of course, everyone's beauty standards are quite different, but neat and simple ways of lacing sneakers will always remain in fashion:

Straight lacing. The meaning is this: one lace is immediately threaded into the very last hole and does not participate in the process, and the other is passed along the lower part and goes out, and so on until the very end. As a result, straight parallel lines should form on top.
Two-color lacing. The secret is simple: two colors of laces are used, and they are cut almost in half and glued together. And then the straight lacing method is used. Only the resulting knot at the junction of the two laces can put pressure on the little finger while walking.
Ladder lacing: the laces are threaded through the top holes, then into the next holes, crossed and passed under the vertically positioned lacing of the opposite end, then the procedure is repeated. Very neat and beautiful.

Laces according to the foot: wide or narrow

How to lace up sneakers beautifully, but at the same time feel comfortable and enjoy doing your favorite sports? Doctors and trainers distinguish two types of feet and, depending on this, give some tips for lacing your athletic shoes:

For a narrow foot: try to choose sneakers with lacing holes not directly opposite each other, but slightly obliquely. And use the holes for tying that are farther from the tongue.
With a wide foot: use the same advice, only use closer holes for lacing. When tying, cross the laces not along the entire length, pass some of them in a straight line into the next hole.

Lace-up according to the foot: high instep or a combination of a narrow heel and a wide toe

Not all feet have a standard shape and size. Finding a good pair of athletic shoes is a real challenge for some, and even simple lacing becomes an intolerable ordeal. How cool is it to lace up your sneakers without feeling uncomfortable?

For high instep, use straight lacing (that is, horizontal, parallel lines) and alternate between crossing laces and threading them into adjacent holes.
When combining a wide toe and a narrow heel, first lace up tightly, and at the end you skip a few holes, threading the laces vertically into the adjacent holes, and tie. Or use two laces starting in the middle. Then you can loosen the top and tighten the bottom.

Remember that there are many different ways to lace up your sneaker. The photos presented in our article and other media clearly show what should be the result. Therefore, consider them carefully and make your sports shoes with lacing more original and beautiful.

Sneakers have become the most popular footwear not only in summer, but they are worn with pleasure both in autumn and winter. To show your individuality in wearing this type of shoe, here's a selection of ways to tie your laces on your sneakers. Remember, your inner style and taste is important in every detail of your outfit. Happy viewing!

How to tie laces on sneakers or trainers: 5 best ways

The easiest and most common way to tie the laces on sneakers is as follows:
1. The lace is passed through the lowest holes and out.
2. The ends of the lace are crossed and passed through the next holes diagonally and so on to the very top.
This method is unremarkable, will not draw attention to you and your shoes. In addition, this lacing option deforms the shoe.

Another way to tie the laces on your sneakers is as follows:
1. The lace is passed through the bottom holes.
2. Skip one end cross diagonally and then horizontally.
3. The other end of the lace passes through one hole also diagonally, and then into the adjacent horizontally.
4. Thus, the sneakers are laced to the end.
This lacing option looks original, it is called "European", because it is exactly how it is used in Europe.

For sneakers with an even number of holes, you can use the following method for tying the laces on sneakers or sneakers, which is called "straight lacing":
1. Both ends of the lace are passed through the bottom holes and exited inside.
2. The right end is passed through the upper hole to the outside and passed through the adjacent horizontally.
3. The second end is brought out through one hole, and then passed into the adjacent one along the horizontal.
4. Next, each lace is passed through one hole to the outside and out through the adjacent one.

The following method is called "sawtooth lacing", this option is very original, appropriate with a sporty style, looks catchy and individual:
1. Both ends of the lace are threaded inward through the bottom holes.
2. One end of the lace is passed vertically inside and out through the top hole, and then passed through the adjacent horizontally.
3. The other end of the lace is passed through one hole diagonally and then horizontally into the adjacent one.
4. Do the same with the first end of the lace, then again with the second, and so on until one of the ends reaches the top hole.

A massive version of lacing sneakers or sneakers may look like this:
1. The ends of the lace are passed inward through the second holes from the top, crossed, and then pulled out through the fourth holes diagonally.
2. Having reached the penultimate pair of holes, the ends of the lace are passed through it inside, and taken out through the vertical lower holes to the outside.
3. Continue lacing by crossing the ends to the very top, the ends are passed through the free holes.

There is a lot of how to tie the laces on sneakers or sneakers, I am attaching you several photos of instructions, in which the ends of the laces are also shown in different colors, and the dotted line shows the actions performed inside.
Lace-up sneaker with hidden knot

Dotted lacing

Factory or store lacing

Lacing used for racers' shoes

Spiral lacing

Butterfly lacing

Surely there is no person in the world who does not have at least one pair of sports shoes with laces. But most people do not bother and leave the factory lacing. But there are dozens of types of lacing! How to tie the laces on sneakers beautifully, original and functional - we will tell you in this article.

But be prepared for increased attention from friends, because they will also want to decorate their shoes in this way.

You don't have to spend a lot of time and tinker with complicated patterns to tie your shoelaces in a creative way. We offer you some easy ways!

Cross lacing

This lacing method is the most common. The laces tied in this way are easy to tighten so that the shoe holds well (this is especially important for tall shoes).

How to lace up:

insert both ends of the lace into the lower eyelets;
cross among themselves;
insert into the following holes.

REFERENCE. This lacing is the best option for children's shoes, as the laces tied in a criss-cross pattern will not chafe the baby's feet.

External lacing

Thanks to this type, laces will not only look stylish, but also wear less.

How to lace up:

skip the laces inside, cross and insert into the following blocks;
cross again, but on the outside, and insert from top to bottom;
internal and external crossing should alternate.

If the number of eyelets on one side is odd, then you need to start lacing from the inside to get the final turn.

Lace-up - butterfly

It is very easy and quick to tie the laces in this way, and at the same time they look stylish and unusual.

How to lace up:

thread the laces inside into the bottom row;
pull the edges of the laces into the eyelet higher on the same side;
cross the laces and insert into the next row (from the opposite side).

Use this type of lacing if your laces are not long enough - it does not require a lot of length.

Ladder lacing

This method is irreplaceable if you want the laces to look strict and concise.

How to lace up:

insert the ends of the laces into the lower holes;
pull one of the ends of the lace out into the opposite eyelet and thread it through the hole on the other side;
also bring the second end out into the opposite eyelet, but skip one row, and also thread it into the second hole;

The lacing tightens the shoe well and looks neat, which is why it is usually used for military shoes.

Double helix lacing

This look looks very unusual, while it is quite easy to repeat it. To make the shoe look even more uncommon, you can tie the right and left sneakers mirror-like (start lacing on the left or right side).

How to lace up your sneakers beautifully:

thread the lace through one bottom hole;
thread the first edge of the lace into the hole in the same row from the inside out;
thread the second edge into the opposite eyelet in the next row from the inside out;
thread the first edge into the opposite block in the next row on the outside;
thread the second edge into the opposite hole in the row higher on the inside;
then the first will go into the opposite hole in the top row on the inside, and the second on the inside.

This lacing reduces friction by preventing the laces from chafing and can be easily tightened and loosened.

Straight hidden lacing

This lacing looks very original due to the fact that there are no internal constrictions.

How to lace up:

thread the laces into the first eyelets;
thread one end into the hole along the same line and lead out. Then thread through the hole on the other side;
also thread the second end into the hole along its own line, but skipping one row, thread it into the opposite eyelet.

For this lacing to work, the shoe must have an even number of pairs of holes.

Straight lacing with concealed knot

This lacing is similar to the previous version, but in this case the ends of the laces do not come out. Suitable not only for sports, but also for classic shoes. For this type of lacing, you need to use thin laces, otherwise the knot will get in the way.

How to lace up:

insert the laces into the lower eyelets from top to bottom so that one end is longer than the other;
skip the laces according to the straight hidden lacing pattern;
both ends will end up inside on the same side.

For this type of lacing, it is necessary that the shoes have an even number of pairs of blocks.

Simple straight lacing

Laces tied in this way will look just as laconic as in the previous versions, but make it much easier.

How to lace up:

thread the laces into the bottom holes inside;
bring one edge into the last hole at the top along the same side;
lead the second into the block higher on the same side outward and thread into the opposite hole, then repeat these steps to the end (straight lacing).

For lacing, you need an even number of pairs of eyelets.

How to tie the laces on sneakers beautifully: ways for the advanced

If you have already tried all the traditional simple methods, then we offer you the types of lacing. Although it is a little more difficult to perform, it will certainly attract the attention of others.

Double reverse lacing

How nice to lace up the laces on sneakers if they are too long? This method requires a sufficient length for tying, so the "tails" will be of normal length.

How to lace up:

The first way

thread the laces inside;
cross the edges of the laces and bring them out through the holes on the opposite side, skipping one row;
reaching the bottom row, cross the laces and thread through the free hole above;
when the laces pass through the second row, they must go under a straight line;
the edges of the lace are also brought out through the opposite eyelets.

Second way

thread the laces inside;
draw the laces to the last holes using the reverse lacing method;
pull the edges of the laces into the holes above on the same side;
tie the laces to the top using the reverse lacing principle.

The lacing starts from the second row of holes from the top.

Lacing - zipper

How beautiful is it to insert the laces into the sneakers so that they fix the foot as tightly as possible? For this, lacing is used - a zipper that came into everyday life from sports - it is used by figure skaters and hockey players.

How to lace up:

insert the laces into the bottom holes from the inside out;
Crossing the edges of the laces, insert the laces into the holes above from the inside out.

Keep in mind that laces tied this way will be difficult to pull on or unlace.

Lacing - cobweb

Such lacing of sneakers looks beautiful and original on shoes with a wide tongue, when using wide laces.

How to lace up:

The first way

thread the laces through the bottom holes from the inside out;
insert the edges into opposite holes, skipping two rows;
skip the edges into the hole down its row, skipping the row;
when tying, you need to draw the laces through the lines that appear.

Second way

thread the laces through the lower eyelets from the inside out;
cross the edges and thread through the hole, skipping two rows;
skip the edges through the hole above in the same row;
cross the edges, thread into the blocks of the second row (three below);
through the hole one row higher on the same side.

To better understand how to lace up your sneakers beautifully, see the photo below:

Best for running shoes with six rows of eyelets.

Criss-cross lacing

This type of lacing looks very unusual, especially if the shoe has a lot of holes.

How to lace up:

thread the laces through the bottom holes from the inside out;
thread the edges of the laces into the next hole on the same side;
cross the edges of the lace, thread them through the lace between the two eyelets and insert them into the holes on the same side.

How beautiful to lace up sneakers in the photo:

Use laces that are long enough for this lacing.

Lacing - diamond

This type of lacing expands the space for imagination: depending on where you cross the edges of the laces, you will get a different pattern. In addition, such lacing will allow you to make both a regular knot and a hidden one, as it will be more convenient.

How to lace up:

thread the ends of the laces through the eyelets of the last row from the inside out;
insert the ends of the laces into opposite holes, skipping two rows;
draw the laces through the bottom hole in the same row;
reaching the top, the laces can be threaded both from the inside to the outside and vice versa.

How beautiful to lace up sneakers: video classes

A great way to learn new ways of tying shoelaces is with video tutorials. From them you can glean new ideas and deal with complex schemes. We invite you to watch a few videos - for sure they will help you choose which type of lacing to choose for your favorite pair of sneakers.

Conclusion

You've now learned many new ways to lace up your sneakers. Some of them will be able to solve additional problems (for example, shorten laces that are too long), others just look unusual and bright, attracting interested glances.

Which method to choose depends on your desires, but it is better not to be lazy and master all the listed methods. After all, originally tied laces can change the appearance of shoes and add a "zest" to your look.

“He does not lace up sneakers, but he trains the laces so that the original laces are cleverly tied and would hold the shoe very firmly on his feet.”

It can be argued loudly that such devices as velcro, fastener and zipper supplant all other fasteners for shoes, but this would be a gross exaggeration. with 5 holes (as, indeed, with any other number of holes) cannot be replaced by anything else.

The Saga of the Faithful Twine

This is not to say that the ropes fastening shoes are an invention of our time. Since ancient times, the sole was held on the foot by leather straps or twines. Let's remember the Roman and Greek sandals, Indian moccasins or Russian bast shoes. Today these are ropes braided from threads with dense ends. Lacing methods may depend on the section (round or flat), on the purpose of the footwear (sneakers, shoes, boots, boots), on the material for making the threads (cotton, silk or synthetics).

If you look a little deeper in history, you can find out that since the 13th century people have used rope devices both in clothes and in shoes. And they were made from a variety of materials. These were, for example:

bast and cotton;
jute and hemp;
silk and wool.

For the convenience and preservation of the ropes from fraying, soft metal (copper or iron) has long been used. Nowadays, plastic is used more often for this. And the filament itself can be synthetic.

Without a lace and neither here nor there

And a variety of non-standard lacing options give ordinary shoes a very original look. This is successfully used by young people, and not only they. In some models of boots or shoes, the traditional difference is precisely the method of rope weaving. For example, the "Oxford" style is famous for the fact that closed lacing is used to fix the shoes, and not some other.

The interweaving of strings on sports or ordinary boots should perform not only a decorative function, but also thoroughly fasten the bootlegs to the foot and ankle of the leg. Failure to do so could result in serious injury. Sometimes it is enough to change the lacing methods to get rid of leg pain or discomfort during normal walking or sports activities.

The methods of weaving the braid on sneakers for playing footbag are able to imitate the semblance of a cup for catching and throwing a ball. How to lace up? On the bottom of the shoe, some pairs of holes just need to be skipped for longer stitches, and the top is pulled tighter.

For cyclists, it is helpful to use the knot on the side of the string. During the lacing process, both ends of the strings are pulled out from one side of the shoe, which allows you to tie the strings from the desired side. This is convenient as the laces do not snag on the chain.

Most famous

As soon as this word is used in a figurative sense! There is a well-known expression "I will stroke only the laces", which means emotional rejection. By the way, this can only be done with flat ropes. They are untied less often than round ones.

In teenage slang, parents are called that. “Shoelaces in a glass” means that the parents are at home.

Guards still take these strings from prisoners for their own safety and to complicate attempts to escape.

And most of all, the real lace of Yuri Gagarin became famous, which was untied at the most crucial moment - during the vigorous march of the cosmonaut to report to NS Khrushchev about the successful flight.

Lacing options

It is impossible to count exactly how many ways there are for weaving ropes on the "facade" of a shoe. The design of sneakers has long turned from fashion into a kind of youth movement. Every now and then there are new and new options for lacing. For some people, coming up with unusual solutions in this area turns into a kind of hobby. Here are just a few of them:

twisted;
Roman numerals;
reverse loops;
lattice;
double two-color method;
with hidden nodes;
lightning;
staircase (European);
checkerboard (from short laces);
double helix;
butterfly;
Railway.

And many, many other ways and names.

Some features of fixing sneakers when playing sports

The lacing of a 6-hole sneaker should be relaxed if the wearer's foot has a wide foot. In addition, for comfort, you need to avoid crossing the strings, that is, it is better to alternate side stitches with crosses. Lacing with such a foot should be loose enough. A universal option called "railroad" is perfect, in which there are no crossings of ribbons. This simple and decorative method is great for fitness training.

Athletes runners need a sense of stability during training or competition. It would seem that this can be achieved by tightening the knots harder. However, the feet may simply become numb and hurt. The way out is this: to the last pair of holes, you need to lift the laces with eyelet-ears without crosshairs and tighten the top tighter. Then the ends are pulled into opposite loops, tying into a knot.

Triathletes need to frequently and quickly change the tension of the lacing, then tighten, then relax the weave. One of the interesting and safe techniques called "closed weaving" is perfect. Use a long piece of string (up to 120 cm).

Very sophisticated is the lace-up of the 6-hole sneaker called "straight bar". They take twines of a meter length and, in a parallel way, alternately thread them into the paired eyes.

The lightning method is similar to colored diagonals with a visible slanted line. It is made of 120 cm rope, good for fixing roller skates, for active practice in any kind of sport. There is one drawback - this weaving takes a long time.

A butterfly made of strings cannot fly. But in order to get the lacing of sneakers with 5 holes of this style, you need to start weaving with a straight stitch over the shoe. Is the number of paired holes even? Then everything is done exactly the opposite: the initial first straight stitch is hidden inside the shoe. If you need to pull off a part of the surface, a butterfly cross is placed there. And where the foot needs some freedom, skip stitches are made.

Feature: the twines are crossed from the outside, and from the inside, the lace is pulled vertically.

Reverse option

It is very indicative that in the armies of different countries they use traditional strong twines to fix soldiers' shoes, rather than modern "Velcro". How to lace up? The "military" way is just the other side of the butterfly weave. Elastic, convenient and quick method that is simply tightened, quickly untied and, in case of injury, can be easily cut with a knife.

It doesn't matter if the number of holes on the shoe is even or odd. You can always skip a couple of holes to preserve the pattern and the desired braid density.

So that the knots hold tight

No matter how you whip the lacing, in the end it needs to be tied beautifully and tightly. There are few ways, as well as weaving options, but the most decorative and reliable ties have been tested and highlighted over time. The basis of any strong rope ligament is most often the so-called "straight sea" or "reef" knot. The trick is that one end of the twine braids the other, first from above, then from below. Such knots are easily woven, tightly tightened and untied very quickly: it is enough to pull the resulting side bows in different directions to loosen.

Additional knots at each lacing step can increase its practicality and strength. This is important when using rollerblades as it takes a lot of work to loosen up this weave. This option can be called the most reliable for such sports.

Ribbons made of natural cotton perfectly hold the bunch, while synthetic ones slide, and the knots now and then fall apart, giving their owners discomfort and inconvenience.

Two-tone lacing

The beautiful 5-hole lacing is made from strings in two contrasting colors. With the segmental-knotted version, they are woven in the usual criss-cross way to the middle, slightly tightening the lower part of the shoe. Then a reef knot is made and weaving continues to the end. They are made with very thin ribbons, folding them in half and fixing them in the middle for each other.
The double helix method weaves very quickly. The usual cruciform method is taken as a basis. At the intersection, the laces are intertwined twice. Then each tip is inserted into the hole opposite to the starting position. The 5-hole two-tone lacing is very decorative. An additional plus will be an easy tightening of the weaving. In addition, with this method, the strings last longer than usual.
With the reverse loop method, the spiral turns are made vertically. It is better to use a lace color that contrasts with the color of the shoes.

What to do if an odd number of holes

Almost all shoe lacing methods are designed for couples with an even number of holes on them. What should those owners of sneakers and boots do who are unlucky with this? First of all, you need to be smart sometimes. There are several solutions to this problem:

skip unnecessary holes in the middle, bottom or top;
make one diagonal bottom brace;
use a double tie;
depending on the weave pattern, make a cross-tie in the middle, bottom or top of the shoe.

And then the 5-hole lacing of the sneaker will be available in any version. And the fastest weaving can be called the fast diagonal method, when one of the ends of the rope is passed obliquely from bottom to top, and the other goes through all the holes from left to right (or vice versa). One end of the lace should be much longer than the other.