How to wash winter shoes. Washing shoes in a washing machine - recommendations, practical experience. How many shoes and how to lay in the drum

27.09.2019

01/11/2018 4 1 558 views

Everyone wants his favorite sneakers to serve for a long time, while staying in good condition. Even if it is regularly brushed after the street, to achieve that they look like new difficult. Then the question arises, is it possible to wash the shoes in the washing machine machine? Many this seems very risky. Moreover, the manufacturers of the shoe categorically prohibit it.

When complying with certain rules, the process will be successful. Ballet women will not only become more beautiful, but also eliminated the unpleasant smell. The main thing is to remember that not all kinds are safe to clean in this way. It is not necessary to wash the leather shoes, it will not suffer similar processing. Fabric sneakers and summer weather options are easily.

Is the machine launder more effectively?

Many launder shoes in the basin and manually. The method is safe, but it is difficult to call it effective, with a lot of efforts expenditure.

Put sneakers in the machine more convenient. If you clearly follow the washing rules, it is correct to set the mode and purchase detergents suitable for this purpose.

What shoes can be washed in the washer, and what it is impossible?

Before you begin cleaning, it is worth carefully learning the product. It is necessary to pay attention to the following features:

The strength of the seams.
Pollution level.
Fabric structure.
Resistance to fluid and cleaning products.

Textiles are subject to sneakers, sneakers, sneakers, ballet shoes and moccasins. They are perfectly coping with manual and automatic washing. In the case when the water-repellent membrane was used in the manufacture, it is necessary to prefer with liquid detergents, since the powder options reduce protective functions and spoil the appearance of products.

Nubook shoes are not recommended, especially if the material is real. But in the presence of great desire, you need after not to forget about the rehabilitation procedures with a hot steam. Boots can be held over a heated kettle, the VILROWS will disappear from this. After brushing and apply a water-repellent impregnation. Putting safely exclusively artificial species.

Membrane shoes can be washed in a typewriter, it is desirable for it to acquire funds in specialized stores. Powder is not recommended.

It is forbidden to use the method for the following options:

skin and its substitutes;
winter sheepskin wool shoes;
lacquered or model products;
suede types;

Do not wash in the machine cheap bad quality shoes - seams may disperse.

Temperature selection for various materials

Ideal if there is a washing machine with the Washing Function, but this is a rare case. Preference should be preferred to the delicate mode, the sneakers and without prejudice are gently refiring. Temperature should not be more than 40 degrees.

How to wash your shoes in a washing machine automatic so that it does not deteriorate?

No need to immediately put shoes there and turn on the mode. It can greatly harm the product. Preparation for cleaning is extremely important, the success of the entire process depends on it.

Before starting the machine, the sneakers should protect the sneakers from the extension of the drum. Otherwise, he can spoil the sole, socks and other components. It is also necessary to protect the machine from solid sterns. For this use - put boots and start the machine. Instead of a case, you can use an unnecessary pillowcase.
It is important to consider large slices of dirt, pull the laces, sweep the buckles and other parts that can be disconnected. You should remove the insoles.
It is necessary to choose the detergent correctly, without it it will not be possible to achieve the result. The usual dry powder is not suitable for this purpose. Often, the granules are poorly dissolved, leaving colored or white traces. It is very difficult to remove them, therefore it is worth a preference to liquid species.

You should not use shampoo and soap. They can spoil the washing machine. Liquid detergent for the machine will suit the best. After you need to perform a number of recommendations:

remove outsider clothes out of the machine, as the boots need to be erased separately and in the amount of one pair;
pour the remedy into the powder department;
put in the drum mesh with shoes;
select the temperature mode, put the revolutions of no more than 600, disable extra functions;
pull the sneakers and shook the sheets of paper in them. This will be required to save the form.

Is it worth using a spin?

It is important to trace so that there is no spin. You must turn off the drying function. These programs are able to cause great damage to sneakers and even drum.

How to dry shoes after machine washing?

Ideally, at the end of the procedure, put boots on open air, a balcony or loggia. It should be remembered that ultraviolet rays can destroy the glue layer. With cold and rainy weather, it is better to carry out the procedure at home. To speed up the process, you can put sneakers on the battery, covering a dense cloth or towel.

Famous method - staging of shoes with lumps of paper. Fill the sneakers with newspapers, wait until they carefully dry. Thus, the moisture is absorbed, and the form remains in the same condition. You can after clean four or five times marks and tie tightly.

For light colors, it is not necessary to use newspapers, as the lining is painted. It is better to use pure paper. Special electrical dryers are also effective. It is important to carry out a procedure strictly according to the instructions that should be attached to them. There are even devices with UV radiation that eliminate fungi and microbes.

How can I remove the divorce from the powder and soap?

If sports shoes remained dirty, you should apply re-washing. With respect to light ked, it is recommended to use chlorine bleachs in composition, for example, a powder oxygen appearance.

To do this, you need to soak boots with warm temperatures, mix water and bleach to a porridge state. Apply it on the surface, hold a few hours. After witching the brush, to slip. Fall asleep detergent and wash again.

Methods can be applied:

A mixture of soda and liquid soap (gel for washing dishes). Bring to creamy state. Apply for divorces, hold a couple of hours. Further trees with water and unnecessary toothbrush. Rinse, repeat if necessary. Wash and dry according to the rules.
Soap solution and 9-% vinegar. Apply ingredients, leave for two hours, after processing traces of gauze mixed in water and vinegar in a 1: 1 ratio. SOLVE, if required re-put in the machine.

If there is no possibility to carry out another procedure, you should apply dry cleaning:

toothpaste. The method is used for light shoes, with the tool must be completely white without colored stripes. Processing until yellow spots disappear. It is useful for this purpose an old toothbrush. After washing with a sponge of foam rubber;
summer. Omit gauze into alcohol, process;
a mixture of lemon juice, 9% vinegar and 3% peroxide. Ingredients should be equal proportions. You can also pour the washing powder in the size of one spoon. Grate pollution, wait from 5 to 7 minutes. Rinse and rinse several times. After using peroxide, this is especially important, since its remnants when the Sun is hitting the formation of yellow spots.

Sometimes none of the methods helps to eliminate pollution. In this case, you should buy a special paint for textiles in a shopping store suitable for color. It can be in powder form or like spray. You should carefully examine the instructions before applying.

As a rule, manufacturers do not advise use Smya to clean the shoes. But consumers have already managed to make sure that such an operation is possible if certain requirements are observed. And now to the question, is it possible to wash your shoes in a washing machine, users give a positive answer. In addition, to facilitate the process, manufacturers of aggregates for laundry laundry set up the release of machines that have the appropriate program.

The peculiarities of the regime are that the rotation of the drum occurs on low revolutions, and the spin with drying is completely excluded. The machine perfectly cleanses the dirt from the surface of the slippers, and the process will not be threatened with the unpleasant consequences of the device itself.

Can I not?

We are ready to take a chance, but in the subconscious, another alarming question appears - for which products this process is possible, and what better not to be washing in SMA? The experiment is an interesting thing, but a couple of favorite sneakers be risked because of this pair of favorite sneakers. It is difficult to argue with confidence that the washing of certain species is allowed, since any product may be subjected to the deformation process. For this reason, before washing, it is recommended to carefully examine your product:

When there is a label with a specific set of information, then it will be much easier to understand the washing. The second option - go to the manufacturer's website and explore care requirements.
It is necessary to take into account the material from which the goods are made. For example, textile shoes such a procedure can be melted
But for suede shoes, water procedures are contraindicated categorically.
Inspect your things carefully. If you see that shoes are glued and stitched seams, it is better to give up their venture. Washing in this case will end sadly, because under the influence of moisture and temperature, the goods will split into the components of the elements.
Insert elements from metal or artificial leather are most likely ruled outwardly. Metal will begin to be covered by corrosion stains, cracks are formed on the leatherette. Externally, such shoes will look unavoidable.

In the washer shoes get rid of pollution much faster and better, and you will save your time.

Remember that a similar procedure is best transferred to any textile goods, but leather shoes should be cleaned manually. After the washing machine, it will bake and lose external qualities.

Suede also reacts strongly to the wet environment, and after washing it can be thrown out.

Refuse to wash the shoes whose quality causes light doubts. As a rule, product options from China are made on a cheap glue composition, which after washing ceases to hold.

In addition, it is forbidden to erase all winter and autumn species, shoes with various decorations, things having damage, products from low-quality materials.

Preparatory activities

Specifying how to escape the shoes correctly, you should not immediately send it to the drum. This not only can lead to negative consequences, but also damage the machine itself. So the process should be proceeding carefully and quite consciously.

Before washing, shoes require protection from unnecessary loads that creates the rotation of the drum. At the same time, it will not be superfluous to think over the protection and for the spinless element itself, since bulky and heavy shoes with a solid sole will be broken. There were even cases of imbalance during washing. The problem is solved easily - sports shoes or other products are immersed in a special bag, then the desired mode is selected.

Remember that ordinary slippers are allowed to erase in a simple way, but other products made from dense materials are recommended to wash only in the bag. Previously shoes are washed away from dirt, laces and other parts made of metal are removed. There are no exceptions and insoles - they are always erased separately.

Bag for washing shoes can be purchased at the store of sports goods or order it in the Internet salon. In extreme cases, the use of old pillowcase is allowed.

How to wash shoes correctly

After performing all the preparatory actions, we lay the bag with shoes in the washing drum. By the way, if the shoes are strongly dirty, it is recommended to pre-dunk.

Remember that you should not erase several pairs of shoes simultaneously. Two is an extreme case.

We close the door of the machine, fall asleep powder. By the way, in this case, it is more convenient to use liquid compositions that are better folded. Many praise the means for the membrane, using it when washing shoes and clothes. For sports shoes in sports goods' stores for sale special means. In extreme situation, use the usual powder, just do not lay it too much.

Now you need to decide on the selection of the program. The best solution is a special function for washing shoes, but it only has new models of SMA. Therefore, install the "delicate mode" so that the shoes will be washed "softly", without damage.

The temperature regime of water during washing should not exceed the forty degrees of heat, and this is one of the main conditions. Exclude the spin and drying. Push up on high revs and drying can spoil shoes. In addition, damage is possible for the machine itself.

It remains only to activate the process and wait until the machine can cope with the task. Remember that when washing, the shoes will begin to beat about the drum, making loud sounds. There is no worry about this.

Rules of drying

This is another important feature. Remember that for drying should not be placed on the battery or under the sunny rays. From high temperature, it is able to reveal or deform.

Inside the white paper should be laid in the maximum amount to give the shoes the desired form. It is forbidden to use printed and glossy products so that the font and the pictures are not transferred to the inner surfaces of the material.

It is best for drying to use a balcony. It is perfectly ventilated, the air has its own positive impact, speeding up the process.

Dirt after washing stayed - what to do?

What to do in the case when the expected result is not achieved? It will be necessary to organize the cleaning from the stains an old proven method - "manual".

Experts advise before washing in a typewriter all complex stains handled manually to ensure that they disappear completely. But often it turns out that it is about such stains that we learn by posting shoes in a typewriter.

In most cases from washing in warm water, complex contaminants are even more fixed, the removal of them occurs at times more difficult. But try to get rid of them. For this there are several faithful methods:

footprints from the engine oil helps to remove the tool to wash the dishes. It is applied to the polluted plot, withstand over the day, then shoes are sent to the machine;
pollution from green grass helps to remove the ammonia alcohol and soap for household needs. A tablespoon of the ammonia is poured into a glass of warm water. Such a mixture is thoroughly rubbed a contaminated area. After that, the treatment of herbal spots with soap, and the shoes remain only to be wrapped in SM;
soot from the surface perfectly removes turpentine, diluted with water in the proportion of "1 to 1". The composition is applied to the stain, the clutch is cloth. After that, washing;
from the paint perfectly helps White Spirit. The shoes moistened in it rolls up until the stains disappear.

It should be remembered that the repeated process of washing for shoes is a serious test. For this reason, it is necessary to deal with complex stains in advance.

First make sure the water procedures for shoes are not prohibited. Natural or artificial skin, suede and nubuck it is better to be brushed with special fitherment or wipe off with moistened napkins.

For manual washing are also suitable moccasins, textile ballet shoes, synthetic, sports shoes. Clean them as follows:

the liquid composition for washing is divorced in water, the temperature of which is forty degrees;
the shoe surface is soaked for twenty minutes to increase the cleaning efficiency;
then water must be drained;
on the specified recipe prepares a new solution;
using the brush for cleaning the teeth, the surface of the shoe on both sides is processed, until the contamination disappears;
it remains only to run a rinse and send shoes on drying.

Remember that rinse shoes need carefully so that after drying there are no divorces.

We share the secrets of mastery

To the process of washing the shoes passed effectively, it is recommended to use Calon or its analogue. For example, a simple soda is suitable. Such means will soften water, which will have a beneficial effect on the final result.

It has already been noted that the suede material is not recommended. But when there are separate inserts from such a material in your shoes, then one cycle of washing harm will not bring.

After the water procedure in the shoes, an unpleasant smell remained? Arm yourself with a napkin or a cloth moistened in the usual vinegar, and wipe the product from the inside. It will only remain weathered shoes to get rid of acetic aroma. If the product is membrane, then it is better to refuse from this experiment.

From strong damage you will be perfectly helped. This gel should be applied to dirty stains, wait ten minutes and send shoes to the drum of the washing machine, without flushing the cleaning agent.

Remember that such things can not be emitting often - excessive loads will reduce socks.

Sports shoes that have not been detached from once, you can scroll into the drum again. For light materials, it is recommended to use a bleach without adding chlorine, for example, powder oxygen options. Sneakers are simply soaked in warm water, not their surface is applied bleaching agent mixed with water to a porridge type. After a few hours, the product is wiping the brush and heads in SM.

Folk ways

Connect the soda and the liquid composition of the soap or means for washing dishes. Mass should be reminded by consistency sour cream. It is applied to polluted places, wait a few hours, then the old toothbrush and water is processed. Washing material, check the result of your work. If necessary, the process can be repeated. After washing requires drying in compliance with all rules.

The second cleaning option is a solution of soap and a table vinegar. Components are connected, applied to the surface, after a few hours, the dirty areas are wiped with gauze moistened in water with a vinegar content of 1 to 1. If you need a re-procedure, then nothing terrible will not be in it.

There are several dry cleaning methods:

A toothpaste of white color is applied to the surface of the light material. Processing must be guided until yellowish spots disappear. Now it remains a sponge to wash the material and dry.
Marley, moistened in the nasharya, processed polluted areas to the surface.
We mix lemon juice, vinegar and three percent peroxide. All ingredients are taken in equal shares. It is allowed to add one spoon of washing powder. The mixture is rubbed dirty spots, shoes are left alone for a few minutes. After such a procedure, a thorough rinse is performed. This is a very important process, since it may be yellow spots after peroxide.

If in your case, none of the ways of a positive result gave, purchase a special coloring composition in a shopping store. It is implemented in the form of powders or sprays. Just before applying, it is necessary to carefully examine the recommendations from the manufacturer.

Conclusion

Footwear is erased easily. Just use special bags and high-quality compositions that do not contain bleaching additives and have a softening effect on products. Observing all the recommendations, you will give your "little friends" the second life.

With the development of technical progress and the emergence of various equipment, life has been simplified. Thus, with the invention of the washing machine, the machine no longer need to highlight a whole day for washing. It can be refreed to refresh even delicate things under the power, while maintaining their original appearance. Unfortunately, all the shoes are also polluted together with clothing, which takes a lot of time to clean. However, often manual cleaning is ineffective: the dried dirt and the stains of winter reagents are tightly settled on the surface of the boot. To solve this problem, manufacturers of some washing machines included in their models mode for washing shoes.

Types of pollution

Before starting the washing of shoes with a machine / manual way, it is necessary to determine the type of contamination and its degree. Usually, it is hard to abandon "old" dirt in the autumn-spring period and salt precipitate on shoes in winterwhich appears when processing roads with antifungal means. Also, a pair of shoes, having an unpleasant smell, is subject to the discomfort of the owner, it is an excellent medium for breeding pathogenic microorganisms, which can harm health.

What to wash?

Currently, there are many means used for washing in a washing machine that are suitable for shoes. It is best to use liquid powders, or capsules consisting of a solution of high concentration, which allows you to clean the labor-based spots and dirt. But in the absence of liquid tools, powder cleaners can be used. In this case, the amount of powder for shoes should not exceed 20-30, when washing of white shoes, you can add Vanish for white - He will return the param of the primordial appearance.

Consider the type of material

It is necessary to take into account the type of material from which the steam is made. In order not to spoil the shoes, you need to choose a suitable cleaning type. Products from the following materials are not allowed to machine wash:

leather shoes. The skin after washing is deformed and loses its commodity;
fur and suede. Footwear with fur and suede leather lins and depresses when exposed to machine washing.

For washing in the machine, sports rag shoes (sneakers, sneakers, conversions, slips are best suited. You should not wash ballets, sandals, home slippers and slates, as they can simply can not withstand a long stay in the water and reveal.

Color

For color models, a concentrate is added to the cleansing agent to the cleanser to save the color. With machine washing, the concentrate may be in the composition of liquid powder, or it should be added separately. In a frequent wash job more expedient to buy Special powder for shoesSince its composition has all the necessary elements for careful and high-quality care.

To impart freshness or removal of a yellow plaque with a white pair, add a bleach. Currently, the market has a huge selection of concentrates / bleach. The most popular of them is Vanish.

How to wash it right?

Before you load your favorite sneakers in the drum of a washing machine, you should check the shoes for damage and defects (if the integrity of the seams and coating is broken, then after washing the steam can become unsuitable for socks). It is also not recommended to wash items with beads, embroidery, rhinestones and other decorations. All decor will fly away, which will lead to a breakdown of a washing machine. A pair of shoes before washing it is necessary to prepare:

remove insoles, laces (they are better erased separately and in manual);
clear the sole of contaminants (if this does not do that all dirt from the sole will fall on the surface of the product, which will be laundered in the subsequent);
gravel and stones on the sole is also to be deleted (for convenience it is better to use an old toothbrush and a wand for sushi);
removable spikes in running sneakers must be removed at washing time.

Prepared shoes should be placed in a special bag for washing (it is sold in any supermarket). Bag protects the machine from breakdowns. If there is no bag, you can use an unnecessary pillowcase or put in the drum several rags and towels. The next action will be adding detergent. Powder is loaded either directly into the drum itself, or to a special compartment (this information, as a rule, indicate the packaging of the means).

The amount of powder is better to reduce to avoid divorces and rinse well shoes. For a tissue pair, you must select the "Additional Rinse" function. If there is a special mode for washing shoes - install it. If there is no one, then the ideal version will be the program of delicate washing or a "short program". An important condition for any mode is to disable the pressure and drying function.

Also undesirable to load simultaneously into the machine-machine more than one pair of shoes.

After proper washing, the next important stage comes - drying things. I reset the boots from the drum, they need them hang in a warm and well ventilated room,so that the glasses are excessive water (gentle alternative to the machine tool). In the summer, an ideal place is a balcony with open windows, and in the winter it is a bathroom with ventilation on.

After the extra moisture of the glass, the shoes are left in a warm place (away from heating and heating devices) with well circulating air. If there is a warm floor in the apartment, then you can dry a pair on it. Boots are stuffed with white paper (Newspaper paint when the moisture gets is painted properties) and periodically, it is changed to the complete drying of the product.

What method of cleaning is suitable for slips, conversions, shoes type Espadrili, as well as winter boots and autumn boots? It is best to take advantage of the manual method of washing with minimal water load on the product.

The preparatory stage with manual washing is the same as during the machine (remove the insoles, to draft shoelaces and so on). Then you need to select detergent. For these purposes, a regular washing powder is suitable for clothing, a special detergent for washing shoes, liquid soap, dishwashing agents, professional fabric cleaning products (before using such substances it is necessary to make sure that they can be used on tissues).

When preparing a solution (for convenience, it is better to use two pelvis: one with clean water for rinsing and the second with a powder) need to take into account the temperature of the water. It should not be too hot or cold. The optimal option will be warm water. The hot composition is capable of damaging the shoe, and the cold - does not waste the pair properly. The principle of operation during manual washing:

a rag moistened in the solution, wipe the shoes from the inside, then rinse it in the container with clean water and wipe the boots again;
next, go to the outdoor side of things. Clean the entire surface of the shoes and, if necessary (in places of strong pollution), use efforts. If the contamination is too strong, then the shoes can be left in this form for soaking for several hours, after which the solution should be washed and renounce the procedure again;
it is important to know that only products made of high-quality fabric are subject to the lock. Non-quality pairs, as well as all types of leather shoes, suede (uggs) or fur exclude soaking. Also, all of the above materials are acceptable as much as possible and sparing cleaning. So, for suede leather, a special brush will be the best solution, and the fur is better to treat a semi-dry cloth with a very weak solution. High-quality leather is withstanding a large amount of moisture, but when washing leather boots, special attention should be paid to rinse (the remaining detergent on wet shoes when drying is converted into ugly divorces and spoils the material).

The insoles also need to be treated with a solution in a similar way and rinse them under running water. Laces can be wrapped in a solution or soap in the sink.

We will get acquainted with some useful tips on the washing of shoes:

after each walk, wipe the pairs. By this, you will prevent the amount, the intensity of the washes and increase the life of the products;
we regularly use a protective aerosol. Protective products are sold in all shoe stores. The irrigation of the surface of the boot after washing warns excessive dryness and cracks after drying. The aerosol when applied forms an invisible film that protects shoes from excess moisture and prevents pollution;
do not neglect the hygiene shoes inside. Erase periodically insoles, as well as handle shoes with antimicrobial deodorants, which are also effective and when dealing with an unpleasant odor;

Not all shoes can be washed in a washing machine, but sports, made of synthetic materials - quite.

Preparation of shoes for washing

Make sure there are no threatening fall off parts - rivets, reflectors, inserts; that the shoes are not torn and not overlapping. If there are such defects, it is impossible to wash the shoes: the filter will be clogged, and the sneakers themselves will suffer even more. Clean the sole, remove pebble and sand from the protectors. It is necessary to remove the laces and insoles, put the shoelaces into the old sock and throw in the drum, and the insoles - it is better to replace, if necessary, but not to wash: most likely, they deform. You can use a bag for washing shoes or an ordinary old pillowcase.

What washing program to choose?

If the car has a special program for shoes, then the question is resolved. If not, there is a program for sportswear (clothes with impregnation), then you can choose it. If the machine is a fairly simple set of programs, then select the synthetics mode. If you want to configure everything in a manual, then choose the low-temperature mode - 30 degrees, the spin speed is the lowest (300-400 revolutions) or disconnect the spin, leave only a drop of water. Do not choose a short program for refreshing things.

How many shoes and how to lay in the drum?

It depends on the loading of the machine and the size of the shoes, but it is quite possible to download two or three pairs (if the load is very large, from 8 kg). Be sure to put several cloths along with the shoes - there will be no imbalance during annealing.

What is the detergent to choose?

It is possible and powder, and liquid, but necessarily without optical bleach (exception - if you erase white or very light sneakers or sneakers). The liquid agent always has advantages over powder: it is better dissolved, it is easier to wash, softens due to the balsam. You can use a stain remover designed for washing in the machine machine.

When the daily care of shoes becomes not enough, the question is visited - how to wash sneakers in a washing machine? What is it worth starting and how to do everything? Let's wonder everything in order.

Features of machine cleaning sneakers

Washing with their own hands takes the time that is often missing. However, sports shoes can be used in the washing machine automatic. This is enough to comply with the recommendations. What kind?

Stage 1. Prepare shoes

Accepting a conscious decision that you are not going to wash without a typewriter, you need to conduct a thorough inspection of sneakers for all sorts of holes and cracks. If this is discovered, the washing process of sneakers will be impossible.

During the inspection of sports shoes, pay attention even to the smallest details. If you are not sure that they will withstand washing - it is better not to risk.

To properly prepare shoes to "bath procedures", just adhere to simple rules. Instruction Presented in Table:

Imagee.	Sequencing
	Step 1 We clean the external part of the garbage sneakers as much as possible. We remove the frozen earth, leaves, grass, etc.
	Step 2. We take insoles and laces if they succumb.
	Step 3. We put in order the sole.

To avoid damage to the machine and the shoes itself, it is desirable to use a special bag for sneakers during washing. The price of it is quite democratic, sold at any economic store.

If you have no bag for washing at your hand, you can use the old unnecessary pillowcase. It will be perfectly cope with the task.

You can catch two hares at a time, if you have a purely "homemade" things with shoes - old mats, rags and towels. Such a manipulation will not give the solid parts of the shoes to harm the mechanics of the washing machine.

Stage 2. Prepare a washing machine

It is worth taking care not only about the preparation of shoes, but also about the washing machine. It is necessary to determine correctly, on what mode to wash the sneakers, which choose the temperature and how to properly place the shoes in the drum.

Fundamental rules:

Washing mode Choose delicate Or, if the manufacturer is provided, a special mode for shoes;

Put in the car not more than two pairs adult shoes or three children's pairs (there are cases of beating glass doors from the inside);

Take into account the fact that in the process of work the machine in the house will be quite noisy. Choose the appropriate time in advance.

Suitable temperature - 30-40 °C.. At a higher temperature, sneakers can be reached;
In the receiver we fall asleep one ordinary portion of the powderit will be enough to wash several pairs of shoes;

Turn off the spin function. This option during the washing of the shoes adversely affects some details of the machine;
If there is a built-in drying mechanism - turn off. In our case, this can damage the shoes.

Stage 3. Finishing

After you heard a signal about the completion of the washing machine, the last stage comes - drying clean shoes. Consider all available options:

Visual example	Methods
	Method 1 We are tamped into the shoes paper (how much will fit) and leave it in a warm place, but not at the battery. Do not forget to change paper as it is impregnated with moisture to avoid plotted smell.
	Method 2. In hot weather, hang shoes on the rope for the laces or on the clothes fittings in the fresh air - on the balcony or on the street.
	Method 3. In winter, we put on the battery, laying under the sole of the newspaper. Personally, I do not like this method, since the shoes can be cut and even to reveal. It is better to carry drying in a natural way.
	Method 4. Use a universal electrical device for drying.

What about other shoes?

Having understood how to wash the sneakers in the machine automatic, the next question appears - is it possible to erase other shoes in this way? Oddly, many types of textile shoes are subject to such processing: sneakers, moccasins, ballet shoes, slippers.

Everything is also necessary to abandon the processing too cheap or dubious on the type of shoes. Even being completely new and high quality, it may not survive the machine shake.

Winter shoes, as well as the leather should not be washed with a machine. You can deform the shoes itself and put irreparable damage to the machine.

Deciding which shoes can be washed, and what you should not, we will understand how to do it.

The algorithm will be there:

We find out the material - there must be textiles;
We carry out a detailed examination for damage;
We produce pre-clean exterior and soles;
Take out, if possible, shoelaces and insoles;
Customize machine:

Temperature 30-40 ° C;
Delicate or shoe mode;
Turn off the apart and drying options;

Seeing shoes After the end of washing.

Summary

If you do everything right, shoes will gain freshness and tidy look. Try to follow the recommendations and you will understand that the washing of sneakers in the washing machine is an easy process.

The video in this article will clearly show what other ways you can return the cleanliness of the shoes. For any issues, please contact the comments.