How to make a chamomile from paper? Paper daisies do it yourself

30.05.2019

New Master Classes for Manufacturing Panel (Applique) - Bouquets of colored paper in our piggy bank.

The diversity of the world of flowers is striking the abundance of shapes, paints and aromas! Everyone will find in this beautiful collection of a flower, which is encouraged by a look or associated with a commemorative event. Our step-by-step instructions with photos will show you how to make beautiful with your own hands: chrysanthemums, daisies, carnations and peonies.

Chrysanthemums won popularity due to a rich variety of varieties. These flowers are distinguished by the size of buds, the shape of the petals, the colors and the number of flowers on the same stem. So, anyone will find among this magnificence flowers that will answer all requests and desires. The buds of pink chrysanthemums, used in bouquets, flower arrangements, garlands and wreaths, look very reverent and gently. And you can also take the pink color of chrysanthemums in creating a panel, composition or appliqués from corrugated paper. Let's consider this idea based on our master class.

Materials and tools

When creating a panel applique with pink volume chrysanthemums you will need:

double-sided color and decorative paper;
dense pink corrugated paper;
white paper;
yellow and dark green marker;
pVA glue (silicate glue).

How to make appliques with bulk pink chrysanthemums from corrugated paper

To create chrysanthemums it is better to use corrugated (crepe) paper with high density - so flowers will be better to keep the form. To work, prepare the necessary tools and related materials.

Cut long strips from corrugated paper with a width of about 5-6 cm (the more width - the longer the flower petals).

Fold strips several times as in the figure.

Scissors cut sharp petals, leaving 1-1.5 cm from the edge.

Do not cuts evenly so that the width of the petals is approximately the same.

Remove each of the strips. Apply a thin line of glue along the entire length.

Start twist the strip into a dense roll. When the first strip will be twisted - start gluing around the second strip.

Do in this way several billets of chrysanthemum flowers.

Gently straighten the external petals of chrysanthemum.

Spread the rest of the petals so that the flower acquires the volume.

Using the blade of scissors, twist the ends of the petals. Do it with all the petals so that chrysanthemum becomes bulk.

The center of the flower is slightly tinted with yellow felt-tip.

The number of flowers can be any, but it is desirable that chrysanthemums differ slightly size.

From paper for decorating cut out a vase of any form. From paper dark green cut leaves, similar to the real leaves of chrysanthemum. Green felt-tipper highlight the bodies on each sheet.

For applications, place the foundation from office paper, two counting colors. The top rectangle cut out figure scissors to get a beautiful frame. Stick the curly sheet on the rectangle.
Stick the vase based applique.

Turn the flowers down petals. Based on the flowers, make cuts and open the edges. Abundant lubricate the edges of the flowers with glue.

Stick three flower over the edge of the vase. Stick the other flowers into the second row.

Slightly enter the edges of the leaves using the scissors blade. Stick leaves near colors and inside a bouquet. A couple of sheets stick near the vase.

Give a little time to spit out the picture so that all the details were firmly stuck to the base. Application with gentle pink chrysanthemums is ready!

This is what a wonderful original composition with pink flowers of chrysanthemums. A little patience, diligence and time, and such an excellent result of the work done! This master class can serve as an example for creating similar appliques with chrysanthemums of any other color or use of flowers to decorate the interior.

"Flowering daisies" from corrugated

Spring gives warm sunny days and new hopes. Thanks to the change of seasons, everything awakens from long winter sleep and the world is revealed in the colors! Spring's harbingers become birds trills and primroses, which inspire artists, poets, lovers of beautiful. And therefore, our today's master class we will dedicate to the creation of a panel with delicate blooming margings from attic paper.

Materials and tools

When creating a panel with delicate blooming daisies, we used:

crepe (corrugated) paper pink, yellow and green;
office paper yellow and green;
stationery and curly scissors;
toothpick;
pVA glue;
green chalk;
pink marker.

How to make a beautiful panel with blooming molding paper margings

Prepare stripes to create bulk flowers. From the pink crepe paper cut the strip 4 * 20-25 cm. From yellow corrugations, cut out a strip of 1.5 * 15 cm, and from the green - several strips of 1.5 * 10 cm.

Fold the strips several times and make notches on a yellow and green billet, and on pink - deep cuts, leaving at the bottom of 0.5 cm.

Scatter stripes. Divide the yellow workpiece into two parts. Connect strips, alternating yellow and green. Apply glue on the bottom of the long blank.

Place the toothpick on the edge of the workpiece and start twisting the strip.

Try to twist the strip so that the length of the notes on the surface is the same.
Twist the yellow-green design of the flower until the strip is over.

Scissors blade twist the edges of petals on a pink blank, as in the figure.

Apply glue on the bottom on the workpiece and start spinning the strip with the petals around the flower core so that the petals will open out.

Tighten the pink strip completely - you will get a lush spring flower.

In order to make a daisy bud, you need to twist the strip of petals inside.

Make a sample of several flowers and a pair of unconcerned buds.

From green crepe paper cut out several rectangles of different lengths. Twist each rectangle in a tight skeleton, lubricate the edges with glue and secure around the stem.

Also from the green crepe paper cut the curly leaflers as in the figure.
Green wax shallow highlight the edges and a central vehicle on each piece.

The center of the leaves give the volume by placing the paper.

From the green office paper cut the rectangle, and from the yellow - a curly rectangle of smaller size. Spend a bright marker along the edge of the curly sheet. Stick a curly rectangle on a green base.

Stick flowers on the base of the panel. Select a convenient layout for you to get a harmonious composition.

Stick the stems for each flower.

At the base of the skes, glue the leaves.

Volumetric panel with blooming daisies is ready!

What delicate flowers turned out! As if by magic in the picture, spring daisies bloomed! Such an unusual panel will become an excellent gift in a holiday or a significant date, as well as an original solution in the interior decoration.

"Delicate cloves" from wet crepe paper

Bright red carnation flowers are often given to men and in, the motley will become a decoration of any bouquet, and white and pink - emphasize the tenderness of the senses. Try to make beautiful carnations from paper and arrange them in the applique. Our detailed master class will explain and show how to do it with your own hands.

To create an applique with gentle cloves, you will need:

pink crepe paper;
colored paper (bilateral);
dense paper for the base;
curly scissors;
stationery scissors;
stapler;
glue;
water pulverizer;
colored markers.

How to make an applique with delicate cloves from wet crepe paper

This creative work requires different types of paper and tools, so you should prepare everything from the list in advance.

Cut 4 identical squares from corrugations.

Verify the squares on each other, alternating the direction of the compressed "drawing". Using a stapler, connect all squares.

Figure scissors cut the circle from the stack of squares. Make cuts to the center to divide the circle on the petals.

Raise the petals from the uppermost circle.

Make the same with all the rows to get a lush flower.

Pink felt-tiper do accommodation on all petals.

Sprinkle with water with a bulk flower.

Fold the flower in half, and then in a quarter of a circle.

Let the flower dry, or dry it with a hairdryer.

Thus, make several flowers and one unwashed bud.

Take half the sheet of light yellow paper and turn over the figure sheet of a light green shade.

From dark green paper cut the three strips with a width of 2.5 cm and glue the stem tube from them. Cut off the cups and narrow leaves as in the photo.

Stick flowers to the base of the applique.

When all the flowers are glued - glue the stalks to three large cloves.

On top of the flowers stir the cups.

Stick leaves to flower stems. Cut the ends of the stems.

Application with gentle pink cloves is ready!

What are the adorable pink cloves we got! Carnations Volumetric, with color transitions - such an unusual technique allows you to achieve the similarity of paper colors with the original. Appliqué can be supplemented with festive ribbon or multi-colored butterflies, or come up with other color combinations for carnation.

"Scarlet peonies" from paper harmonica

The world of colors is beautiful and diverse! Diva is given - what bizarre forms, combinations in color and shades are found in the kingdom of flora. Among the garden flowers, beautiful spherical peonies are distinguished with their magnificent forms, rich in the flowering on the bushes and flower beds. Wonderfully these flowers look in bouquets, compositions and festive decor elements. And still beautiful volumetric peonies can be made of corrugated paper and use them in the design of the application or panel.

What will be needed in the master class

To create appliqués with almy peonies, we need to take:

office paper light green and light yellow color;
color bilateral paper of yellow and dark green color;
corrugated bright red paper;
corrugated cardboard orange or brown;
green marker (marker);
scissors, glue.

How to make appliqué with almy peonies from corrugated paper

Prepare the necessary tools, colored paper and cardboard to create a composition with bulk colors.

Take a part of the sheet of light yellow color and cover the light green rectangle over it on top of it, so that the framework is left on the edges.
From orange corrugated cardboard Cut the basket for flowers. Get the basket based on the basket.

Prepare rectangles of red corrugated paper, as well as small yellow rectangles for decoring the center of flowers. Each red rectangle is divided into four parts and fold them on each other.

Fold from corrugated rectangles harmonica so that the assembly is perpendicular to the bend lines. There should be three vertices or five lines of bend. Make a yellow paper harmonic.

Make the edge of the red harmonica, and the yellow still make notches. Put the yellow item in the center, inside the red harmonica.

Make a small cutout with scissors from the back of the harmonica and reinforce the center of the thread.

Flowers from paper nice not only to see, but also do it yourself. In addition, they have a couple of advantages over their natural analogues - they are much more accessible and durable. By the way, learning how to make flowers with your own hands, you will never be confused if you suddenly need:

Pack gifts;
Decorate the house for the holiday;
Festively;
Make props for a photo shoot;
Make gifts for loved ones, friends, colleagues or teachers / child teachers;
... or just update the interior.

From this material you will learn how to make flowers with your own hands from corrugated, colored or tissue paper (sewing). You are waiting for 4 step-by-step master classes with pictures and templates, as well as a selection of 70 beautiful photos and useful videos.

Ideas of application

Later we will tell you about the techniques of making flowers from paper, but first we propose to inspire photo examples of their use.

Bouquets from paper colors can not only be put in vases, but also "plant" into cute porridge. To do this, they must first stick to the basis of foam or floral foam. Next, the foundation should be reapged by dry moss or minor pebbles.

Flowers made of paper in vases, pots or just buds without skes will decorate, March 8, Easter, St. Valentine's Day or wedding.

Cache paper flowers

How to make napkins for festive table setting? Just put little flowers from above or fold into the rings with bright buds.

And here is another attribute for the festive design of the table - holders for guest cards.

Decorate the house for the holiday or just so can be such garlands or cascades of flowers.

To make such a garland of flowers with your own hands, use ribbon billets of petals (see MK number 1 below, step 3) and miss the stroke and pestle manufacturing steps

Take a sheet of cardboard or canvas on the subframe, stick to it buds and place in the frame. Voila, Panel is ready! It can be hanging on the wall or give a friend.

A beautiful photocona can be ordered from the masters, and you can highlight a couple of days and make it yourself, significantly savooming. In the second master class, an instruction is presented how to make large flowers with your own hands.

Photowon with flowers for a child's birthday

Large paper flowers can be made for a photo shoot.

Of the colors from corrugated paper, luxury wreaths are obtained. They can be used as an attribute for thematic party and, also for a photo shoot.

Even the simplest gift packaging will become elegant if you decorate it with homemade paper buds (see Master Class No. 1 and No. 4). In this selection of photo examples, you can learn a couple of original ideas.

Master class number 1 - Flowers from corrugated paper (basic instruction)

Flowers from corrugated paper made with their own hands may look surprisingly plausible. Although at some stages of their manufacture I will have to tinker a little, even the newcomer will be able to cope with the cradle from the very first time.

In this selection of photos, examples of paper flowers are presented, which you can do yourself, following our step-by-step master class.

To work, you will need:

Corrugated paper of the desired shade (for buds);
Green corrugated paper (for stems, leaves, cups) and / or tape from corrugated paper;
Floral wire (wire in green winding, sold in stores for creativity, aliexpress) or wooden skew / wire / newspaper tube / needker;
Scissors;
Glue (best hot glue-gun);
Pencil.

Master Class

Although almost any flowers can be made from corrugated (crepe) paper - from roses to tulips - the principle of their manufacture of about the same. The main difficulty is to make the right petals: give them the desired form, volume, size, select the paper color, guess with quantity.

Following our master class, you will master the basic skills of making colors from corrugated paper and can make roses, peonies, tulips, lilies, daisies, chrysanthemums and dahlias.

Step 1. So, first we need to make a stem. If you use a floral wire, then simply cut it to the desired length: a stem of about 30 cm is suitable for compiling a bouquet, and for, say, the boutonnieres are enough and 15 cm.

If you do not have a special wire - it does not matter. Excellent stem can be made of wooden spanks, any flexible wire or newspaper, carved into a thin tube with the needles / spitting. At the last stage, your improvised stem must be wrapped with green corrugated paper (we will tell about it below).

Step 2. Since the pestles and stamens are different in all colors, and sometimes there are no them, then there is a set of "core" manufacturers of artificial colors.

To make a chamomile or daisy, it will take the core of the bud in the form of a yellow button. On the stem, catch the wool ball, then wrap it in a pair of yellow squares cut out of corrugations, wrap the base of the "buttons" of the green corrugated ribbon and finally fix the tape by glue.
To make a rose core, you need to cut 9x9 cm square from color corrugated corrugations, fold it into a triangle, then two triangle angle to connect with its vertex. Next, the resulting flag-like workpiece, take it on the top of the stem with a green corrugated ribbon and fix with glue.

The following photo illustrates blanks for making cores of different colors.

Want to prevent a bouquet of flowers as a sweet gift (see photo below)? Use candy as the core! To do this, just put it on the top of the stem and fix the scotch / paper tape.

Step 3. Start the manufacture of petals and budding. This stage is the most important, so he should pay more attention. Depending on what flower you want to do, select one of two methods of work.

Method of one petal (suitable for roses, peonies, lilies and other colors with a small amount of petals)

As it follows from the name, the method is to form a buddy bud, petal petal.

The first thing is drawn and the template of the desired form and size is cut (see Templates below).
Then the corrugation is developing several times, the template is applied to it, the pattern circuit will be bored with a pencil, and then cut off with scissors. As a result, you will have several blanks at once. Repeat the procedure several times to get the desired number of petals.

These templates will help you navigate in sizes, forms and the number of petals. Keep in mind that the length of rose petals, peony and tulip should be approximately 9-11 cm, and lilies - 13.5-15.5 cm

Further, all petals need to give the volume and bend: to stretch a little and exhaust inside / out, if necessary, wrap the tips on the toothpick / skeletal (n-p, for roses). To understand what kind of form you need to give petals, it is enough to look at the photo of the present flower and a little experiment.

Corrugated paper is easily stretched, twisted and accepts the specified form.

To make a peony, you will need to make 35 petals and stem with a button. How to make petals: focusing on the photo, cut the petals of the desired shape, then slightly stretch them and drive them inside, the base of the petals slide a little. The central petals are glued below, and the rest is higher. When the flower is ready, slightly subjected the tips of the petals inside

To make a rose, use 5 small and 7 large petals (see template above). Rounded the petals just below the middle, and turn the top edges on the skewer / toothpick out. At first, the small petals to the core, and then large.

For the manufacture of lily, use 5 petals (see the template above) and a pestle with stamens of red and white corrugations. Fold the petals in half along to form folds, and then deploy them. Purge the petals by turning them out in the widest place.

Tulips from corrugated paper are made easier. Petals will need only six, they need to round them a bit, and the tips are pleasing

When all petals are ready, start gluing them alternately to the stalk, and then on each other, sticking to chess order. It is best for this purpose a hot glue gun. If the petals are not too much, then instead of glue, you can use the same green corrugated paper tape (see photo).

Ribbon method (suitable for daisies, daisies, carnations and other "multi-layered" colors)

The difference between this technique is that the petals are cut off separately, but from the band of the corrugation, when the workpiece becomes similar to the fringe. In this case, the petals acquire the volume and bending (sometimes at the same time several layers) only after fastening the fringe to the stalk.

Cut from corrugated bands of the desired length and widths, then fold it in several layers and cut the petals of the desired form (see the template below).

Tightly wrap the resulting fringe around the pestle and secure it with green corrugated ribbon, tape or glue. If the layers are obtained too much, then the bud does not slip out of your hands, the fringe should be cut into several parts.

The central petals of chrysanthemum need to wink around the pestle quite tightly, the rest are free and slightly above

Carnation is made of three strips (see the template). The first strip you just need to tightly assemble into a bundle and secure with ribbon / tape. The second and third band should be wrapped around it, holding and aligning the lower part of the bud. Next, the bud is fixed by corrugated ribbon or glue. At the end, pull the petals outside to give the carnation rounded form

To make a dahlia, start winking a blank just below the pestle, but in the future wound the petals, climbing higher and higher. Purify the petals round shape, tighten the tips into the tips and finally clamp the tip of each petal to form a fold

Purify the bending petals if necessary.

Now that the flower is almost ready, it needs to be supplemented with sewers and leaves on the stem. To do this, cut the billets of the leaves in the appropriate quantity, form and size (orient to the photo or patterns) and simply glue in the right places.

Chassels are glued under the bud, then the bend and volume are given.
To make leaves for some types of colors, such as tulips or lilies, it is enough to cut the blanks and glue them to the stalk. However, some flowers have leaves with cuttings and make them need somewhat differently. Cut out the leaves (with a small margin for fastening), then glue them to a small piece of wire, wrap the wire into the green paper, then glue the cuttings to the stalk. If desired, paper leaves can be replaced with artificial.

Hurray, your flower from corrugated paper is almost ready! It remains only to climb the entire stem strip / ribbon green corrugation, starting with the cups and passing the place of fastening the leaves. At the beginning and at the end of the stem, the winding must be fixed with glue.
So that the flowers made by their own hands have gained an even more realistic look and retained their beauty longer, cover them with melted bee wax and let dry.

It is better to understand how to make flowers from corrugated paper with your own hands, the next video lesson will help you.

Master Class No. 2 - a large rose of corrugated paper

Large flowers made by their own hands are good for decorating photosons, ceilings and walls on holidays (for example, at a wedding or birthday). And they can become a spectacular props for a photo shoot.

To work, you will need:

Roll of corrugated paper of the desired color 50 × 200 cm (1 roll / 1 flower);
Roll of corrugated paper of green (for stem and sewers);
A4 paper (you can use office);
Hot glue pistol;
Scissors.

How to make large paper flowers:

Step 1. First, make the stem. Take a sheet of white paper A4 paper, attach a pencil on the corner, then turn the paper into the tube.

Step 2. Fully expand the corrugated paper roll. First fold it twice, then again twice, then again ... got a rectangle? Now fold it in half to get a square of about 25 × 25 cm.

Step 3. Cut the paper folded into the square in all places of folds with scissors. You will have two identical stacks of square sheets, of which on we will cut petals.

Step. 4. Fold each stack in half. From the first stacks folded into the rectangle, cut the shape similar to half a heart, as shown in the diagram below. From the second pile cut out the same form, but smaller.

Expand the stacks to get such petals.

Step 5. Twink the tips of the petal with a pencil or handle, and the petal itself stretches a little and bent into the beyond.

Step 6. Purify the petal even more rounded the form, making two folds in its lower part and fixing them with hot glue.

Step 7. Start the formation of bud. Roll one of the small petals around the stem is tight enough.

Step 8. Start gluing the rest of the small petals, adhering to chess order. When small petals are run out, continue to increase the bud with big petals. Total, your rose "turns out" 15 petals (+1 petals in the center of bud).

Step 9. Square sheet of green corrugation (25 × 25 cm) Fold diagonally to get a triangle, then the triangle fold 2 more times in half. From the resulting multi-layer triangle, starting from the fold line (!), Cut out the form as in the picture below. When you make a cut out of the workpiece, you will have a four hundred.

Step 10. Make a small cruciform incision in the center of the four hundred, (see fig. Above), through the resulting hole, put it on the stem to the booton, then glue the leaves with hot glue.

Step 11. Hooray, our big rose is almost ready. It remains only to wrap the stem in green paper. To do this, turn it into a roll, then from the edge cut from it about a 2-centimeter piece in the width (that is, just as if you were cut off a piece from the roll). Now dismiss the resulting tape and wrap the stem, fixing the upper and lower ends glue.

From the following video you will learn how to make large flowers with your own paper hands.

Master class number 3 - Colored paper hyacinths (suitable for children's creativity)

These hyacinths look as if they were made by a quilling technician. In fact, it can even make such flowers from paper with their own hands! The manufacture of the first hyacinth will take some time, but for each next flower you spend no more than 5 minutes.

To make such a bouquet of flowers with your own hands, you will need a little more than half an hour.

To make paper flowers you need:

Color paper or not too dense cardboard (for buds);
Green paper (for stems);
Scissors;
Line;
Pencil;
Glue stick;
Spoke or wooden spanchka.

Master Class

Step 1. Cut the strip about 21 × 2.5 cm. If you use color paper / Cardboard A4 format, then you just need to cut a sheet across.

Step 2. Recovering 1 cm from the top edge, feed the line along the band using the line. Next, with the help of scissors, cut your blank on the strip of a width of about 5-7 mm, not reaching the previously drawn line. You will have something like a ribbon with a fringe. Try to cut paper on smooth and parallel stripes, but do not worry because of errors, because in the folding form they will not be noticeable.

Step 3. Using a knitted needle or a wooden skeleton, thoroughly minimize each strip in the roll until it stops. Make sure the pencil line is on the back of the paper.

Step 4. Now we will deal with the stem. From green paper (cardboard will not fit!) Cut the strip 21 × 2.5 cm.

By the way, if you want to save time, then as skes just use green straws.

Step 5. Tighten one of the corners of your strips diagonally, then slightly walk through the entire lane with a pencil (see photo) and finally turn the entire strip into a thin tube.

When you finish, it will look like this:

Step 6. It is time to turn the bud and glue it to the stalk. To do this, take the billet (stripper with curls) and lubricate its base from the wrong side with glue.

Step 7. Hooray, your first paper flower is almost ready, it remains only to supplement the stem leaves. To do this, cut a piece of about 2.5 × 8 cm from the green paper and fold it along into the harmonica with a width of approximately 1 cm.

Collect the harmonica and, retreating about 1.5 cm from the bottom edge, give it a leaf shape with scissors.

In the deployed form, your workpiece should have a 3-4 leaflet and look something like in the photo.

Step 8. Grease the lower part of the leaves with glue and place its corner of about 5 cm below the bud and at an angle, as shown in the photo below. Next, wrap the blank tightly around the stem.

Well, that's all, Hyacinth is ready! Repeat the process using the paper of different shades to make a bouquet of paper.

Bouquet of paper flowers do it yourself

Master class No. 4 - Roses from paper (express way)

This master class will come in handy to you when you need to make flowers with your own hands super-fast, easy, fiscal and large quantities.

To work, you will need:

Any pretty paper (even book pages are suitable);
Green paper for leaves;
Glue (best thermo glue);
Scissors;
Pencil.
Wood spanks (needed if you want to make a bouquet).

How to make roses from paper:

Step 1. Cut a square sheet of paper about 12 × 12 cm.

Step 2. Draw on your square a circle, and then inside it draw a spiral. It should not be impeccable, so that roses get wondering. If you wish, you can and make it a wavy, then the rose will have pronounced petals.

Step 3. Cut your circle, then cut the workpiece along the spiral line. As a result, you will have something like a spring.

Step 4. Take the external end of your "springs", twist it into the roll (dearly), then start twisting the entire tape around it. Stick the flower from the bottom so that the paper does not break.

Step 5. When you get to the bottom (the inner part of the workpiece), stick a bud with a sufficient amount of glue to it. Voila, the first flower is ready!

Step 6. If you wish, the rose can be added to the leaves. They are cut out arbitrary shape and stick.

Step 7. If you want to make a bouquet, then stick the buds on the spanks or the newspaper / paper tube. Stems preferably wrap in a green tape of green color.

Here are some more ideas for making colors with your own hands that you can implement using our master class.

Wedding garland from colors from colored paper and book pages

Paper flowers can become not only a memorable gift, but also an original interior decoration. You can decorate with such crafts with any room: both bedroom, and living room, and a children's room. Paper flowers absolutely do not require any care in contrast to the real colors. Yes, and it is possible to place such floral compositions in any part of the room, regardless of lighting. Make paper flowers can be handled without assistance. The main thing is to choose a suitable scheme, especially if you are a novice in this form of needlework.

See also: Hyacinths from corrugated paper with their own hands. Master class to create colors with photos.

Today we suggest you to master the technique of creating paper daisies with your own hands - see the master class with step-by-step photos.

To work on paper margaries, prepare the following materials:

color double-sided paper of green, yellow and lilac shade;
crepe-tape of green color;
pencil simple;
line;
glue stick;
scissors.

Master class on creating flowers from paper "Daisy with your own hands":

1) First, we need to create workpieces for daisies of daisies. To do this, from the sheet of color paper of a lilac shade, cut off the strip of 3-3.5 cm wide.

Now you need to do small cuts along the entire length of the strip. To speed up this process - to lay the strip in half, and then once again in half, and already after begin to cut the strip.

Pre-apply on the billet line by retreating from the edge of 5-7 mm.

2) When cutting, you should not cross the drawn line!

Daisy petals are ready.

3) Creating a middle of a flower in the same way - cut off the strip, but already yellow color, we fold several times, we plan a pencil of the limit line and create cuts according to its edge.

The width of the strip of the yellow billet should be slightly less than the strip of the lilac blank.

3) The length of the stem of the natural daisy is about 9-11 cm. Prepare the segment of the wire within the specified length. Watch the wire crepe-ribbon green.

We appline glue on the whole edge of the yellow billet, and after winding it on the tip of the stem.

The end of the tape is fixed with glue.

After screw the flower on the basis of a lilac strip. We have it a bit above the tips of the yellow base.

5) bottom of petals fix glue and a wide strip of crepe paper.

Now you can straighten the petals of Daisy. Slightly twisted them out.

Several strips twisted in the opposite direction - inside.

6) From the paper of the green color, we cut the oval daisy leaflets.

We give leaflets a realistic texture, drawing them with a reverse side of the brush or toothpick.

7) We glue the leaves to the flower flower. Two leaves on one stem will be enough.

Everything, a daisy paper is fully ready!

How to do

The list of materials was extremely modest:

1. Paper (I used parts from my paper pile of waste: textured and smooth carnation and white on white, as well as long, narrow strips for flower centers),

4. Circle template (I used a drink of a glass of drink),

5. Flower wire and green flower tape in order to make first-class stems

Pick up the glass with the diameter you need, in size of the estimated flower. On each flower will go 2 more circles. The smaller the circles, the flowers look more gentle. If you choose a large size of colors, then the paper should be more dense, to keep the form.

Then divide the circle on 8 sectors

Then, roll each petal in half, longitudinally, as designated by the plug-in lines in the illustration below. There is no need to pre-win these bends, as the added time and effort do not significantly improve the results. Only simple fold will be sufficient.

As soon as you finished folding one disk, simply repeat these first three steps with all your remaining discs. Street with glue 2 disks, slightly shifting, so that the petal of the upper and lower circle protrude. This will give both margaritas

The core is made of long strips twisted as in quilling, i.e. In a simple circle (dense spiral) and sticks. Wire is wound with green ribbon (sticky) and attached to the flower.

Materials:

Paper
thermopystole (you can just glue)
Wire for skes

Production:

First we prepare paper circles - cut them on the pattern (use the circles of the diameter you need, you can circle a glass, a glass). For each flower, 2 circles will be required. In the example, a circle with a diameter of 7.5 cm was used in the photo.

Make 8 cuts on each circle, as shown in the figure below. In this example, cuts were a depth of 2.5 cm each. If you want to reduce the time of manufacture - cut the stack of blanks immediately.

Then bend each petal in length of pressure (in the figure, the folding line is shown by the dotted line). Do it with 2 paper circles.

Now take these 2 ready-made flower and impose them one on another so that the top flower petals fall between the petals of the bottom. Stick them to each other in the center.

To make a flower storm, take a narrow strip of paper of another color (sizes of about 3 mm x 45 cm), roll it into a dense spiral and stick to the flower. Skes Make out of the wire; Wrap it with green paper.

As the stalls glass pebble, glued to a piece of bilateral tape. You can also stick a piece of crumpled paper, rhinestone, just stick the sequins or make the heart with any way known to you.

Here are also the options for bouquets of daisies made according to this scheme.