Location of classic boots with 3 holes. Video: Beautiful sneakers lacing. New ways of lacing shoes

16.06.2019

Surely lacing Yours boot, sneakersor Ked.no particular originality.

I want to offer you a simple and cheap way to transform your shoes! For this you will need, perhaps only new, longer shoelaces!

Not being mathematics, it can be assumed that ways to lace up shoes enough. But in fact the possibilities in different ways to launch shoes or sneakers are tremendous a lot!

You probably can not even imagine that for an ordinary shoe with 6 pairs of holes, mathematics implies almost 2 ... trillion (1.961,990,53,600 !!!) of different methods of lacing! Even if you discard all the purely hypothetical capabilities (remove the mirror identical horizontally or vertical variants of laceings), take into account the passage of the lace through each hole of the boots only once, take into account, among other things, and the fact that usually shoes begin to stroke from the top pair of holes that the shoelaces can be Multiple and bind various nodes between the holes in various ways.

I imagine your attention original ways lacing shoes.

1 Traditional Cross Lace Method

The lace is skipped through the lower holes and is output from both ends. Ends intersect, and then skipped from the inside out through the holes. Return to the upper holes and tie the laces. This method is easy and convenient; Fleet shoes, and not a leg.

2 lacing with crosses over-under

If on the boot odd Number of pairs of holes, start to cord from the inside (as in the photo of the boot), and if thorough - That is from above (as in the scheme). This is a very beautiful and easy way that reduces to the same wear of your shoelaces!

3 Simple Straight Lace

One end of the lace stretches immediately to the very top, and the other passes through all the holes. Suitable for boots with an even The number of couples holes. It is quite difficult to align the tailings of the shoelaces to tie them, but the lacing look very carefully.

4 lacing for forest thickets or cycling

It looks not very, but the lace knot due to its location on the side (inside for the forest or outside for cycling) is not clinging and not unleashed.

5 Shop lacing

One end of the lace is immediately passed into the upper opposite hole, and the second end gradually flashes the entire shoe, performing the semblance of a spiral. This method can be modified by skipping one end not by deficient, but hiding both in a simple straight lacing (3 way to lace boots from this article).

6 Lacing World Wire

Very decorative lacing, especially for high boots or boots using contrasting shoelaces. Carefully follow the scheme so as not to get confused (starting with a gray segment-middle of the lace, then one end is shown blue, the other - yellow).

7 Double reverse lacing

More economical modification of the lacing method. For him, cords can be consolidated and slightly shorter.

8 lacing butterfly

Named so for the similarity with the butterfly tie. If on the boot odd Number of pairs of holes, then first make the straight stitch at the top (as in the diagram) if thorough - At the bottom (as in the photo of the shoe). Butterfly crosses can be made on those sections of the shoe that you need to pull, and make skipping where the leg can be given a little freedom. You can use relatively short shoelaces!

9 Military lacing

This is the reverse version of the butterfly lacing. Named military, because the boots of soldiers of the British, Dutch, French and Brazilian armies are so lacing. And what, it looks good, and the laces are not needed long ...

10 Lacing Railway

It is very similar to the previous method, only the shoelaces are not diagonally, but directly. This method of lacing is suitable only for thin or flat laces, because the laces are passing through holes twice. That is why the lacing is very durable, but it is difficult to tighten it.

11 lacing double spiral

Beautiful and fast lacing, reducing friction and extending life to your laces. The left and right shoe can be laid for symmetry in mirror mapping.

12 lacing grille

Such a lacing is difficult to tighten, but it, however, is very big popular for their decorativeness. To simplify work, first gloss up all the lacing by one end, and then skip the other end of the lace through the lattice. Such a grid can weave only on shoes with 6 pair holes.

13 Golden lacing

In essence, the same lacing as the previous one, but for it the laces will fit and slightly shorter. Economical option.

14 lacing zip-zipper

This lace is very difficult to tighten, but it is very strong, which is ideal for lacing skates and rollers. At the same time, it looks like a huge clasp - zipper.

15 lacing with one hand

You will not even have to tie a bow, just a nodule is enough at one end of the lace. At the top, the lacing is more dense, and the bottom is completely free. It is best to use with small holes and thick laces.

16 segmental node lacing

At your request, you can make the upper and lower half weaker or stronger than tightened. With such a lacing, however, it is difficult to shove your leg into the shoe, as the node will interfere in the middle.

17 Hidden knot

Straight lacing stitches look more original if the bow is not visible. This method will help hide your bow!

18 Two-color lacing

Very and very beautiful and original lacing. The only but - discomfort from the knot (may, sew or cerebbing the shoelaces with scotch, and not to tie into the knot, and this helps the cause?) Ideally, you need to cut two long lace on slightly unequal parts so that the tips are in the end of the same length.

19 Double two-color lacing

A very creative way of lacing, which you can beat the colors of the flag of your country or the favorite team. 4 The tip of the shoelars can also be creatively tied. If you have boots with odd The number of holes, then you will need shoelaces of different lengths.

20 lacing reverse loop

Beautiful variant of lacing having, however, has its own minuses. First, crossed loops tend to move from the middle. Secondly, friction increases wear of shoelaces. Will look gorgeous if you make it two-color.

21 lacing with nodes

The added node at each lacing step increases its strength and improves appearance. The method is ideal for lacing ski boots, rollers, etc. Loosen the lacing is very problematic.

22 Circular lacing

Beautiful strong lacing, which is also difficult to loosen. Especially decorative weave look with thick round white laces on the shoes of a contrast dark color.

23 Roman numbers

It looks particularly beautiful on shoes without a gap between halves. You can vary the amount and location of the XX and II, depending on the number of holes on your boots.

24 lacing for footbag

To play a football, it is convenient to create a semblance of a bowl of your shoes, so that it is easier to control the thrust and fishing ball. Of course, the boots are losing the form, but for the sake of the interests of the game you can suffer! This is one of at least four lacing options, three more will be presented.

25 Lace Method for Footbach (Soca)

All four lacing methods combine long stitches around the edges, pulling halves of the boot outward. The top of the lacing can be performed in another way, not as on the diagram and photographs.

26 Footbach Lace Option (Soca)

In this case, the method of lacing the edge of the shoe is wider than when using the first two.
To further increase the disclosure, you can start the lacing not the third pair of holes from the bottom, but even higher (and not to use, skip the third or other pair of holes at all).

27 Well, it's generally a separate song! Lacing without start and end.

Walciate from shornov The canvas, and you will never have to tie them! :)

28 Method for passionate macrame :)

Need long shorders And a lot of patience.

29 The lacing passes on the boot twice, so you will need laces are authentic!

30 Quite simple, but nevertheless spectacular method of lacing.

A bow turns out to be in the middle, and not on top.

31 Easy, combined with elegance in perpendicular segments lacing Outside and oblique inside.

32 Pretty economical way, you do not need too long shorders.

It looks very simple and concise.

33 Original design: perpendicular segments lacingoutside combined with a zigzag inside.

34 Do not be discouraged if you have not found long shornov.

Enough to buy in pairs short shoelaces for each boot! True, the lacing time every morning you have to spend twice as much!

35 Original method "Merezhka": and shornov It is not necessary long, and it looks quite interesting.

36 The way can be called puzzles :)

For unlable spirit. But if you do not confuse in the process lacing, Get a very beautiful result!

And now, even imagine how great it will be if, in addition to the original lacing method, use and original bright shoelaces! Your sneakers or boots will simply not know!

As specialists say in the field of fashion, correctly selected shoes - this is already half of the success. Good and high-quality shoes will be able to supplement the image and make it memorable, and a bad pair of shoes can also spoil the impression at all.

In this case, there is a great way to correct the situation - to lace up its original and unusual way. After all it is the lacing first thing that rushes into the eyesSo it is located on the top of the shoes.

Having bought shoes, many leave the option that offered the manufacturer and do not change it for years. You can do so. But today a large number of ideas that will emphasize your style are invented.

There are options that will help transform even an inexpensive pair of shoes.

Experiment with the nodule.
Change shoelaces with black on contrast or leather (You can choose an option for the color of the socks, under the details of the costume, etc.).
Short shoelace (Cut off with scissors, and ends to pour either glue or thin metal tubes).
Instead of ordinary flat shoelaces better use roundThey look solid. And the lush and synthetic are suitable for sport style.
Apply different types of lacing on each boot.
Change the lacing method.

The most recent way is the most diverse, so I will talk about it in more detail.

Main ways of lacing shoes

Usually the store shows shoes, which has a lacing already made by the manufacturer. Most often she plays a decorative role. And it is aimed at watching male and women's shoes on the shop window winning and could easily be customer. But such options are not always practical in everyday life.

Traditional methods

Parallel

reference. Suitable for shoes, in which from 3 to 6 holes on each side.

It is a reference to the official style, is perfect for a formal meeting or business dinner.

In the first row the lace is inserted from above.
Then one half is removed from below in the last hole. on the same side as the second part performs a drawing of a zigzag.
This figure begins in a hidden way and is riveted on one hole above, then transferred to the second part of the shoe from above into a parallel hole.

With cropped nodule

In this case, he will be hidden between the last and penultimate passage. The lace itself will resemble a parallel method.

First of all, one part should be kept shorter than the second. Then proceed to lacing a long end parallel to the edge. Wherein both parts must meet inside the boot, Then they are associated with the node.

The main disadvantage is that it will be necessary to wear them like slips without unleashing.

Cross-option

Crossing are visible above the tongue.. The lacing passes through the lower holes and goes upstairs from two ends.

Then they intersect and run from top to bottom. Actions are duplicated to the very edge.

Alternative Method of Cross-shaped Lace

It is that each part goes on its side, interacting with the second component in the center by intersection with each other.

Classic crosses

Crossings from above

One of the most familiar ways that was used from the very beginning of the appearance of shoelaces.

It is distinguished by rigor, restraint and is not striking.

Universal, is essential and suitable for any kind of shoes.

Diagonal

Two options are permissible:

mirror reflection of each other;
the same tie on each boot.

This way outwardly resembles the "cross from above", but if you look at, then the original pattern is visible on the diagonal.

To repeat this option, need to alternate lace locationPosing it from above, then the diagonal is diagonally.

Cross over-under

It consists of a sequence of crosses that alternate above and under the tongue.

It looks interesting On classic models (Oxfords, Derby).

The lace is in the first row, the ends of the same size. Then they intersect and pass in holes located above. Next, the ends intersect already inside the shoe and are output. Such a drawing should be repeated to the top.

Internal (hidden) lacing

Straight

It consists of parallel lines, gives shoes of ease.

The disadvantage is that the lacing is difficult to delay.

It is better to apply such a way on shoes from 3, 4, 5 holes from each side.

Inverse

It is practiced in the army structures of some European countries.

Tie the following method.

The first holes are connected by direct method.
Next is the inner cross.
After that, holes are connected on one side.
Two parallel lines are obtained.
Completes the composition internal cross.

Easy

One of the easiest varieties of lacing.

Follow them in such a way that both ends are inside the boot. One part must be displayed over the next hole. And the second half to put a snake in such a way that all vertical lines are inside.

This option will suit for shoes with even hole numbers (4-6).

Lestenka

Combines direct and classic lacing.

Male and Women's Tutting Scheme

The lace passes through the first row and is displayed on both sides.
One part to print crucifably through the upper lover.
Otherwise, bypassing one hole.
Continue to cord alternately in one and second way.

Must get a drawing in which from above, all the laces are tied in parallel to each other, and a diagonal can be seen below.

Additional variants of lacing

Special

For sports shoes

Laceting specially invented for active activities. In Ne. the nodule is tied not at the beginning or end of the boot, but in the middle.

The first row is not typical of the standard, but passes diagonally between the first and last hole.
From both ends, the lacing is a zigzag (first diagonally, then straight).
Both ends are found in the middle, where the knot is tied without a bow

Bicycle

Used so that when skating the nodules does not fall into bike elements. To do this, it is located on the side.

In the first row both edges are upgraded.
First you should deal with one part. It must be started through one hole, but on the same side.
Conduct inside and display on the other side and again by passing one hole to run.
The same should be done with the second part of the lace.

Original

Nodules

Both edges after the first row are uploaded.
Next, twisted with each other 2-3 times or are veiled in any interesting way.
Then the ends diverge in different directions and again output.

This method is not the easiest, but it looks impressive and firmly holds.

Lightning

reference. Mainly applied by professional hockey players or skating skating.

Insert the laces in the first row.
One part of the bottom to the bottom and stretch in the last hole diagonally.
The second part should be made diagonally to the next hole behind it.
Then insert into the hole, which is located above on the same side and send diagonally to the other side.

Double spiral

Beginning from below, we take one part and begin to stir up to the edge of the diagonal. First we skip down, then from above.

The same must be done with the second part.

Such the method is very simple, lightweight and reduces wear.

Chess

This option B. it will look great, if there are two pairs of laces of different colors. You can use standard white and black, but you can approach the question more interesting.

IMPORTANT! You should choose wide laces.

The first row is inserted below. In this case, one edge must be asymmetrical to the second, since all work will be made only with the second part of the lace.

It must be tied in a parallel way. That is, it should be launched from below and remove it, located on the same side, but above.
Send a lace from above in the hole opposite, which is located in parallel.
These actions should be done to the very edge.
Next, take the lace of another color and send the tip to the end of the first lace, they can be associated with each other and hide.
After that, a chess way is required to conduct it first on top of the first one, then below.
To complete the work, turn around and do these manipulations with all the holes to the end.

Pautinc

For this option, you need to wear a lace into the first row from the bottom, to release the edges to the outside and cross both parts.
Insert into the holes diagonally, passing two rows.
Then through the bottom to skip the lace into the next hole on the same row and put into a diagonal on the other side.
For greater beauty, the second part needs to be allowed between the already stretched ropes.

Butterfly

This method it looks stylish and original.

It is necessary to turn the lace into the first row and take the ends inside.
Next, each end should be done in the luber, which is on the same side, only above.
Crighten the laces among themselves from above.

How to cord shoes with loops

There are so many ways that will allow you to lax shoes with hinges beautiful and original. Here is some of them.

Infinity

One part of the lace must be stretched through two hinges, which are located on each other. Go to the second side.

Such actions should be done to the end and with the second part too.

Zigzag

One end to launch diagonally to the last loop. And the second end to circle around each loop diagonally.

Double back

Both End to spend through the loop. Cross each other and secure the next row. Next, each end to put on the same side through two loops and disintegrate again.

Surely lacing Yours boot, sneakersor Ked.no particular originality.

I want to offer you a simple and cheap way to transform your shoes! For this you will need, perhaps only new, longer shoelaces!

Not being mathematics, it can be assumed that ways to lace up shoes enough. But in fact the possibilities in different ways to launch shoes or sneakers are tremendous a lot!

I imagine your attention original ways lacing shoes.

1 Traditional Cross Lace Method

2 lacing with crosses over-under

3 Simple Straight Lace

4 lacing for forest thickets or cycling

It looks not very, but the lace knot due to its location on the side (inside for the forest or outside for cycling) is not clinging and not unleashed.

5 Shop lacing

6 Lacing World Wire

7 Double reverse lacing

More economical modification of the lacing method. For him, cords can be consolidated and slightly shorter.

8 lacing butterfly

9 Military lacing

10 Lacing Railway

11 lacing double spiral

Beautiful and fast lacing, reducing friction and extending life to your laces. The left and right shoe can be laid for symmetry in mirror mapping.

12 lacing grille

13 Golden lacing

In essence, the same lacing as the previous one, but for it the laces will fit and slightly shorter. Economical option.

14 lacing zip-zipper

This lace is very difficult to tighten, but it is very strong, which is ideal for lacing skates and rollers. At the same time, it looks like a huge clasp - zipper.

15 lacing with one hand

16 segmental node lacing

17 Hidden knot

Straight lacing stitches look more original if the bow is not visible. This method will help hide your bow!

18 Two-color lacing

19 Double two-color lacing

20 lacing reverse loop

21 lacing with nodes

The added node at each lacing step increases its strength and improves appearance. The method is ideal for lacing ski boots, rollers, etc. Loosen the lacing is very problematic.

22 Circular lacing

Beautiful strong lacing, which is also difficult to loosen. Especially decorative weave look with thick round white laces on the shoes of a contrast dark color.

23 Roman numbers

It looks particularly beautiful on shoes without a gap between halves. You can vary the amount and location of the XX and II, depending on the number of holes on your boots.

24 lacing for footbag

25 Lace Method for Footbach (Soca)

All four lacing methods combine long stitches around the edges, pulling halves of the boot outward. The top of the lacing can be performed in another way, not as on the diagram and photographs.

26 Footbach Lace Option (Soca)

27 Well, it's generally a separate song! Lacing without start and end.

Walciate from shornov The canvas, and you will never have to tie them! :)

28 Method for passionate macrame :)

Need long shorders And a lot of patience.

29 The lacing passes on the boot twice, so you will need laces are authentic!

30 Quite simple, but nevertheless spectacular method of lacing.

A bow turns out to be in the middle, and not on top.

31 Easy, combined with elegance in perpendicular segments lacing Outside and oblique inside.

32 Pretty economical way, you do not need too long shorders.

It looks very simple and concise.

33 Original design: perpendicular segments lacingoutside combined with a zigzag inside.

34 Do not be discouraged if you have not found long shornov.

Enough to buy in pairs short shoelaces for each boot! True, the lacing time every morning you have to spend twice as much!

35 Original method "Merezhka": and shornov It is not necessary long, and it looks quite interesting.

36 The way can be called puzzles :)

For unlable spirit. But if you do not confuse in the process lacing, Get a very beautiful result!

And now, even imagine how great it will be if, in addition to the original lacing method, use and original bright shoelaces! Your sneakers or boots will simply not know!

The sneakers and sneakers have long ceased to be just sports shoes and do not disappear from fashion collections and MUST HAVE lists. For several seasons in a row. Their mad popularity is understandable - this shoes can be made up with summer sundress, and with a strict suit or bright overalls. Form, color, decor open a huge field for experiments ... But still there are different ways of lacing! To find out how to lace up sneakers in non-bank and spectacular, rather read our article!

Simple but interesting schemes

European way

One of the most popular and stylish ways. To lace a European sneakers, the minimum amount of effort will be required:

Spring lace outside insight into the bottom loop.
One part of the lace is now extended from the inside into the hole above diagonally.
The second part of the lace mean with the same way, but one hole above.
The end of the lace extended to the opening at the same level inward.
Continue alternately to laugh until the end of the holes.

Smooth lacing

Ideally, if the sneakers or a ced have an even number of thoughts - then you do not have to leave the upper loops without a lace.

You sell the lace outside the inside, starting with the lower holes. In this case, one part of the lace should be a little shorter than the other.
One end of the lace is made from the inside in the loop above on the same side.
Another end is to be outwarded above two loops on your side.
The lace in this method always goes into parallel loops, outside.
In an even lacing, it is not customary to tie a bows, hide the shoelaces in sneakers.

"Butterfly"

In this method, the ends of the lace crossed on the visible part and stretch inside, so the lacing visually resembles a bow tie. The method is convenient and practical, because it gives the legs in sneakers enough space and weakens the pressure.

First you need to enter the lace outside the inside on the lower rings.
Stretch the lace up, withdrawing it to the next floor of a ring.
Then the shoelaces are crossped on the front side.
Repeat these steps below to the top rings.

Original schemes are more complicated

Pyloid method

Try this lacing when you will understand with the previous one. It looks cool and effectively.

In the lower loop, the lace is based outside the inside.
A portion of the lace on one side is introduced into the loop above from the inside the outward and is inwarded into the parallel hole on the other side.
The other end of the lace is introduced diagonally with the mandatory passage of one hole.
The first end now repeats the movement of the second, but on the hole above.
Continue until one of the ends of the lace is over.

Diagonal or "Commodity" method

Such a lacing is rare enough, but it is very practical: it is tied and unleashed quickly with due skill. Learn more:

Insert the lace to the lower rings outside the inside. Do not forget that one end should be much shorter than the second.
Provide the short end of the lace into the upper hole from the opposite side.
Another end of the lace extended all the hinges of the painter to the top top, the tie bows.

"Lightning"

The name of this method refers to the usual zipper. It is quite difficult to repeat this lacing, but you can cope!

Stretch the lace through the bottom loop and display the sides on both sides.
The cords of the shoelains are tied to the screeds on the same "floor" and are removed in a pair of loops from the inside.
The ends of the shoelaces crossed on the front side, they are tied under the ties of this level and rise to the "floor" above.
Similarly, lace up sneakers to the most upper holes.

Methods of lacing on 4 holes

The easiest and most familiar option - tie the shoelaces crosswise on the front side of the sneakers or a ked. To do this, simply enter the lace to the lower rings outside, remove from the inside, to scribe both tips and again extending in the loop.

Methods of lacing on 5 holes

5 loops - the most prompt number of holes on sneakers. Here you can break away with experiments. Try one of the most original, but at the same time simple lacing methods on 5 loops!

"Node"

Enter the lace from the inside to the bottom holes and the extension it outwards. It is easy for the length of both parts of the lace was the same!
Enrolling one tip of the lace about the other, scrub the part of the lace and extend them again in the loop of opposite sides.
Do these actions, sold each time the lace in the loop from the inside out.

Methods of lacing on 6 holes

Here you can already truly "get roaring"! When we master the methods described above, adopt for an unusual and intricate lacing. Believe it, it costs every effort!

"Shop lacing"

Extend the lace to the bottom holes from the inside out.
Both tips now extend to the upper holes from their sides from the inside.
Each tip of the lace clings the loop for a nearby end and again stretches up, into the next hole.
Repeat these steps to the very top.

How to tie a bows on sneakers and dies unusually and beautiful?

How many ways to tying shoelaces in the bows do you know? Surely no more than two. But after all, in addition to the traditional node from the looping and simple fastened ends of the shoelaces, there is a non-binding solution - to tie a bow on the side! Sneakers or sneakers will immediately look feminine and nail.

Repeat all points of a smooth lacing.
Having reached the upper holes, enter both the end of the lace into the holes down and higher on the same side.
Looking at the side of a pretty bow, and the remaining ends of the shoelaces hide in shoes.

In fact, options for different shoes or sneakers have a lot of shoes or sneakers! You probably can not even imagine that for an ordinary shoe with 6 pairs of holes, mathematics involves almost 2 trillion (1.961,990,53,600 !!!) of different methods of lacing! Even if you discard all the purely hypothetical capabilities (remove the mirror identical horizontally or vertical variants of laceings), take into account the passage of the lace through each hole of the boots only once, take into account, among other things, and the fact that usually shoes begin to stroke from the top pair of holes that the shoelaces can be Multiple and bind various nodes between the holes in various ways.

Plus, to all the above, taking into account the usual life realities that the passage of the lace through each hole should subsequently help to pull the halves of the boot together, and not only to promote their decoration; What lacing we have to delay and relax, and it should not take too much time and strength; The lacing must save his shape and look beautiful. Even considering all these complex requests, the IAN FIEGGEN lace and lacing connoisseurs confirms the possible digit in 43,200 different lacing options for a conventional shoe with 12 holes.

This article provides those who are tested by the developed 27 original lacing methods for the shoe.

So, proceed to the description of both the most traditional and super extravagant boot lacing methods, including lacing methods for football:

1 Traditional Cross Lace Method The lace is skipped through the lower holes and is output from both ends. Ends intersect, and then skipped from the inside out through the holes. Return to the upper holes and tie the laces. This method is easy and convenient; Fleet shoes, and not a leg.	2 lacing with crosses over-under Favorite scheme Ian FIEGGEN If there is an intense number of pair of holes on a shoe, start to cord from the inside (as in the photo of the boot), and if you know something from above (as in the diagram). This is a very beautiful and easy way that reduces to the same wear of your shoelaces!	3 Simple Straight Lace One end of the lace stretches immediately to the very top, and the other passes through all the holes. Suitable for shoes with a clear number of pairs of holes. It is quite difficult to align the tailings of the shoelaces to tie them, but the lacing look very carefully.
4 lacing for forest thickets or cycling It looks not very, but the lace knot due to its location on the side (inside for the forest or outside for cycling) is not clinging and not unleashed.	5 Shop lacing One end of the lace is immediately passed into the upper opposite hole, and the second end gradually flashes the entire shoe, performing the semblance of a spiral. This method can be modified by skipping one end not by deficient, but hiding both in a simple straight lacing (3 way to lace boots from this article).	6 Lacing World Wire Very decorative lacing, especially for high boots or boots using contrasting shoelaces. Carefully follow the scheme so as not to get confused (starting with a gray segment-middle of the lace, then one end is shown blue, the other - yellow).
7 Double reverse lacing Economical lacing modification. For her, shorter shoelaces can come.	8 lacing butterfly Named so for the similarity with the butterfly tie. If there is an odd pair of holes on a boot, then first take the straight stitch at the top (as in the diagram), if you know at the bottom (as in the photo of the shoe). Butterfly crosses can be made on those sections of the shoe that you need to pull, and make skipping where the leg can be given a little freedom. You can use relatively short shoelaces!	9 Military lacing This is the reverse version of the butterfly lacing. Named military, because the boots of soldiers of the British, Dutch, French and Brazilian armies are so lacing. And what, it looks good, and the laces are not needed long ...
10 Lacing Railway It is very similar to the previous method, only the shoelaces are not diagonally, but directly. This method of lacing is suitable only for thin or flat laces, because the laces are passing through holes twice. That is why the lacing is very durable, but it is difficult to tighten it.	11 lacing double spiral Beautiful and fast lacing, reducing friction and extending life to your laces. The left and right shoe can be laid for symmetry in mirror mapping.	12 lacing grille Such a lacing is difficult to tighten, but it, however, is very big popular for their decorativeness. In order to simplify the work, first gloss up the entire lacing with one end, and then skip the other end of the lace through the lattice. Such a grid can weave only on shoes with 6+ pair of holes.
13 Golden lacing In essence, the same lacing as the previous one, but for it the laces will fit and slightly shorter. Economical option.	14 lacing zip-zipper This lace is very difficult to tighten, but it is very strong, which is ideal for lacing skates and rollers. At the same time, it looks like a huge clasp - zipper.	15 lacing with one hand You will not even have to tie a bow, just a nodule is enough at one end of the lace. At the top, the lacing is more dense, and the bottom is completely free. It is best to use with small holes and thick laces.
16 segmental node lacing At your request, you can make the upper and lower half weaker or stronger than tightened. With such a lacing, however, it is difficult to shove your leg into the shoe, as the node will interfere in the middle.	17 Hidden knot Straight lacing stitches look more original if the bow is not visible. This method will help hide your bow!	18 Two-color lacing Very and very beautiful and original lacing. The only but - discomfort from the knot (may, sew or cerebbing the shoelaces with scotch, and not to tie into the node, and with this help the case?). Ideally, it is necessary to cut two long lace on slightly unequal parts so that the tips are in the end of the same length.
19 Double two-color lacing A very creative way of lacing, which you can beat the colors of the flag of your country or the favorite team. 4 The tip of the shoelars can also be creatively tied. If you have shoes with an odd number of holes, then you will need cords of different lengths.	20 lacing reverse loop Beautiful variant of lacing having, however, has its own minuses. First, crossed loops tend to move from the middle. Secondly, friction increases wear of shoelaces. Will look gorgeous if you make it two-color.	21 lacing with nodes The added node at each lacing step increases its strength and improves appearance. The method is ideal for lacing ski boots, rollers, etc. It is very problematic to weaken the lacing.
22 Circular lacing Beautiful strong lacing, which is also difficult to loosen. Especially decorative weave look with thick round white laces on the shoes of a contrast dark color.	23 Roman numbers It looks particularly beautiful on shoes without a gap between halves. You can vary the number of HX and II depending on the number of holes on your boots.	24 lacing for footbag To play a football, it is convenient to create a semblance of a bowl of your shoes, so that it is easier to control the thrust and fishing ball. Of course, the boots are losing the form, but for the sake of the interests of the game you can suffer! This is one of at least four lacing options, three more will be presented.
25 Lace Method for Footbach (Soca) All four lacing methods combine long stitches around the edges, pulling halves of the boot outward. The top of the lacing can be performed in another way, not as on the diagram and photographs.	In this case, the method of lacing the edge of the shoe is wider than when using the first two. In order to further increase the disclosure, you can start the lacing not a third pair of holes from the bottom, but even higher (and not to use, skip the third or other pair of holes at all).	In this case, the method of lacing the edge of the boot diverges the same way as in the previous one, that is, wider, compared to the use of the first two options. Methods of such a lacing are suitable not only for football, but also in the case of too dense or narrow shoes.

The article uses information and illustrations from the site dedicated to lacing.