We make a wreath for the new year with your own hands. Festive wreaths from tinsel and candy. The base of foaming

21.10.2019

How to make a New Year's wreath with your own hands? This question on the eve of the New Year holidays is especially relevant. After all, everyone wants to create a magical festive atmosphere, which means it is time to think about how to make a Christmas decoration on the door with your own hands.

By the way, you know that in our time the tradition to hang a wreath on the door nor incessant is gaining popularity in Russia? According to the teachings of Feng Shui, the wreath is hanging on the door not only in order to please the eye of passersby, but also to attract good forces to the house, and the evil respectively scare away the bright and beautiful decoration.

Therefore, we tell and show different options for how you can make a Christmas wreath with your own hands on the examples of detailed photos of instructions.

How to make the basis for a wreath with your own hands

Before proceeding with examples of how to make a wreath with your own hands, it is worth saying a few words about how to make the foundation for it. After all, it is precisely it largely determines the appearance of the future wreath. Of course, the easiest option to buy a ready-made basis in a retail store or search them on the Internet. But if you did not meet it on sale in retail stores, and there is no time from the online store - one way out is: make it with your own hands.

What makes the basis? From anything. As a basis, you can use the hoops for embroidery, wire cut from cardboard or foam plate, a corrugated tube (for example, from an old vacuum cleaner), or a thermoflex (this isolation for pipes is sold in construction stores). If you stop your selection on a thermoflex or corrugated pipe, you will need to work a little to create a circle form, namely: just cut off the needed length and glue the edges with a tape or tape. A more troublesome method: glue together cardboard bushings from under toilet paper.

In addition, you can build a good basis of newspapers or old paper. Moreover, in several ways. You can enclose with newspaper sheets or newspaper tubes with a cardboard circle or wire, and it is possible to form a tight circle from the sheets of newspapers. In all cases, for reliability, the basis of the newspapers at the end you need to wind up with dense paper towels, and at the end of scotchpieu or nylon pantyhose - so you align / smooth the edges and give the strength of this design and a wreath as a whole.

In addition to old newspapers and magazines, any other paper will come down, fix it to the cardboard circle with threads, as shown in the photo example below.

Well, of course, we must not have forgotten that we can weave the wreath of the branches with their own hands (from birch or IV). For weaving it is better to use freshly cut branches. If they are not enough elastic, they need to be brought every 5 cm or soak in water (if the beggars do not help). The weaving process itself, see the photo instructions below. In general, nothing complicated if the branches will slip - fasten them with glue or threads.

How to make a New Year's wreath do it yourself

Now let's talk about how to make a wreath with your own hands. In fact, consider different options for decor ready-made basics.

Since the New Year and Christmas is, first of all, the smell of the Christmas tree, first of all, consider a couple of options for how to make a wreath of alive sprues, fir or branches of some other coniferous plant. Where to take the sprigs of a coniferous plant? - As a rule, sellers of the Christmas trees sell and twigs, or if you buy a live tree home, if it is installed, you will definitely have several unnecessary twigs.

So, proceed to business. Everything is simple, cut the sprigs of suitable size (as shown in the photo number 2 - cut off from a large branch, smaller sprigs) and fix them to the basis of threads, wire or brackets. With the help of glue we are wearing the edges of the edges to its side surfaces. When it is all hidden under the branches, proceed to decorating: glue small Christmas balls, snowflakes, bumps, nuts (pre-painted in white as an option, except for paints in honor and sparkles) at the end of the swelling beads or garlands. The finished Christmas wreath is hanging on the door or put on the table, placing a candle to the center or a bottle of champagne.

By the way, if you decide to make a New Year's wreath of live branches as the basis, the branch itself is perfect and the branch itself, of course, it will not be so lush, but this is no less beautiful. Follow the instructions in the photo below.

As a result, it turns out a beautiful Christmas decoration, and the time for its creation, by the way, will take less than in the first case.

I hope you understand the idea, and otherwise: you can die on your way to decorate wreath: stick to some other color scheme, use any other decorations (wide ribbons, candies, bells, cinnamon sticks, dried oranges) Give your will Fantasy!

In addition, alive twigs can be laid wire or hoop for embroidery. Add jewelry in the form of berries or beads, a bowl of beautiful tape and a Christmas decoration on the door is ready.

By the way, such a thin wreath can be hampered as an option to the ceiling above the dining table. Add to the green chain beads, and you will get an elegant decoration.

Using different types of branches, bumps, artificial horns, God himself ordered to make an unusual wall-mounted Christmas wreath, as shown in the photo below. Agree, it comes out quite a decent Christmas decoration.

In addition to the "green" branches to create a Christmas wreath, you can use both "naked", the main thing to paint their paint and / or cover with artificial snow - it will truly magical winter decoration on the door.

Do not know how to make artificial snow? - Everything is simple: Mix together the semolina, white paint, PVA glue and artificial snow is ready. Another way to make an artificial snow: mix white soap, shabby on a grater, and starch diluted with warm water. Because it is necessary to beat the wedge to the reception of a homogeneous mass. Proportions in both cases adjust themselves.

Continuing the topic of "natural" materials, it is worth noting the beauty and elegance of New Year's wreaths made purely of cones, walnuts (you can use any other nuts) or acorns.

Pay attention to the way to make a wreath of cones: the rings are glued to each brush, which are then riveted on the wire. In the same method, you can make a wreath of Christmas balls.

Cinnamon sticks also deserve attention, and the whole sticks can be glued, and you can cut them into parts.

Well, of course, round "Spiles" branches glued to a circle of wood or cardboard and decorated with a small composition of ribbons, twigs and cones. I think such a New Year's wreath will have to taste to many.

And if you do not have the ability to use live branches ate for one reason or another. You can use Christmas tree tinsel, you can make a beautiful New Year's wreath on the door with your own hands. Decorate with a ribbon and artificial flower.

On artificial flowers, it is also worth paying attention to: you can make a wreath of artificial colors. In a round basis, do the holes, cover the stems in them and turn them.

And you can use and bulk base: just wrap it around it stems or cut off the stalks and glue flowers.

Yes, if you decide to make a New Year's wreath on the door from Mishura, it is not necessary to take it only green, other colors are also great.

Along with the Mishur, the "Bates" are well suited from tapes that are usually used for gift packaging.

Another excellent idea to make a Christmas wreath: to use glass Christmas balls, as already mentioned above, you can drive balls on the wire, and you can stick them. The balls themselves can be one color, but you can combine multi-colored balls with each other. And in the other case, the finished New Year wreath pleases the eye.

In addition to glass balls, you can use "woolen" balls. To create them, you need balls from foam wrap over threads or make small loose spackers from one wool.

A good wreath is obtained: if you wind up the basis of woolen threads and glue only a few woolen balls.

Or make woolen pomponiki.

And you can combine balls with paper (pages from some not a very interesting book). From paper to make small kules and poke them a circle, and on top to decorate with small balls or beads.

Or make a wreath on the door purely from the tubes of some beautiful colored paper.

In addition, it is possible to make a harmonica from the paper, which shames the hoops.

And you can make paper stars or snowflakes. In the case of the stars: it is better to make them out of thick paper or cardboard, stick the stars to the chains and paint an almost ready wreath of paint from the spray gun. After drying the paint, wreath to ovell a few layers of the twin with glued beads - and you can enjoy the result.

It looks very beautifully a Christmas wreath, made of plastic snowflakes, they can additionally decorate with small mirrors and / or decorate rhinestones and sparkles. In addition, paint into one color, or vice versa to make multicolored, sprinkle with sparkles, etc. It turns out an unusual christmas wreath.

And do not forget that the wreath can be wrapped with garlands. She will make your wreath truly magical.

And you can make a large wreath of snowflake per door from ordinary wands for ice cream.

Let's go back to woolen threads, you can wind the basis for a wreath threads, and on top of gluing flowers made from felt, beads, etc.

Another good way to make a wreath with your own hands: it uses old socks. In this case, the flares of different sizes were involved, put them on the cardboard and cut the circle, which was then told in socks, threads and placed between the chambers. It turned out a beautiful unusual New Year's wreath on the door.

In addition to socks, you can use any other fabric: burlap, organza, etc.

In addition to sections of different fabrics, you can put the old sweater into business. Will the sweater and suitable pieces will ovell a round base (you can sew edges with threads or glued with glue), decorate with flowers from felt or felt from above. It will be softer to some extent "cozy" wreath.

In addition to different fabrics, different ribbons, twine or rope will be used.

By the way, here you have a clear example of using a corrugated tube from the old vacuum cleaner. At first glance and do not guess that he hides in himself such a wreath.

A pretty wreath is obtained and when using cotton balls. And if you add only a burlap bow to it, as shown in the photo below - you will get a wreath in a rustic style. And you can use the decorations brighter.

A spectacular wreath can be created even from sweets (if you do not feel sorry).

If you have a foam base: cut off / squeeze the leaves on it, cut off with a green marker or paints, do not hurt extruded plots, and glue beads. The finished wreath pleases and the time you will leave not much. By the way, even a small child can make it.

By the way, if you decide to make a wreath on the door with your own hands it is not necessary to do it round. You can use an old frame. Paint it and bring multicolored balls to her on the ribbons - a bright wreath will come out.

Or at all you can build a snowman on the door.

In general, as you can see, there is a lot of ways to make a New Year's wreath on the door with your own hands, so experiment! And you will definitely get a beautiful Christmas wreath with your own hands. Happy New Year!

Relatively recently took its place among the most favorite festive decorations. Protestant pastor Johann Hinrich Vihern made it in 1839 for his children who were asked when Christmas is. This wreath was made of the old wooden wheel with four candles, each of which was lit on Sunday for four, three, etc. Weeks to the Great Holiday and helped the children to count the time before him. This beautiful idea took root in Christianity and gained widespread.

In this article, we will tell how to make a Christmas wreath with their own hands in a traditional style of twigs and cones, and also how to create it from perfectly unexpected at first glance. The result of your works will not give up ready-made shopping products for beauty and will certainly overtake them in originality.

Bright and festive

If you like to emphasize your personality in everything, you will enjoy this wreath. In the letter used for its decoration, your surname can be encrypted.

To make a Christmas wreath with her own hands, need:

ring base of grape vines;
unbreakable christmas balls and other plastic decorations of different sizes;
multicolored ribbons;
color grid;
wooden letter;
acrylic paints;
wire.

Procedure:

Work begin with decoration letters. Collect it in the main color (here - red), then add a multicolored peas (white and green).
Now we will sell the wire in the attachment of large balls and screw them to the ring.
Then we will cover the bows of the mesh ribbon right on the vine. So that the wreath becomes more magnificent, cut their edges.
When the letter is dry, drill holes in it to turn the wire to consolidate on the wreath.
Fill out the remaining empty places with small christmas toys and multicolored bows.

Simplify the task

In 10 minutes you can make this monogram christmas wreath with your own hands. Photo:

It used only a wreath of a vine, a letter, an artificial spruce twig with decorations and hot glue from a pistol. Like a constructor, it all needs to be collected together - and the wreath will be ready. The main thing is everywhere where the branch and the letter concerns the basics, try to drive the glue droplets.

MK: christmas wreath do it yourself

In this master class, we will teach you how to work professionally with natural material. You will need:

wire base for a wreath (you can use ready, but you can build from two hangers);
floristic wire;
moss, fir branches;
decorations - cones, balls, bells, painted sticks, etc.;
color tape for bow.

Progress:

Wreath decoration

As we work with natural material, it is advisable to think in advance how you will decorate the product, and sketch the scheme on paper. For wreath, as in the photo, act like this:

Make a magnificent bow, grind a wire into it and secure on the rings from the branches. Optionally, you can add a beautiful large bead or brooch.

Paint white chips or silver paint around the edges. Then wrap the wire between the scales at their base and stick it into the base of the wreath. When the wires of the wire appear from the wrong side, bend them and hide back into the moss. Change the angle of inclination of cones so that they look natural, but at the same time gave the volume. At this stage it is convenient to work like this: put a wreath on the table so that the edge of the product is in the air. Stick wreath with one hand, decorate - the other, gradually rotating it.

Attach bundles of twigs painted in tone, balls, bells and other decorative elements that you have.

Simple and inexpensive

But such a New Year's christmas wreath, with their own hands made, requires minimal material costs. For its manufacture need:

cones (collect them in the near forest);
wire hanger;
beads-rings with a diameter of a little more hanger thickness;
ribbon;
glue pistol;
artificial snow, white paint (optional).

Production:

Corses can be decorated with artificial snow or paint slightly, like the previous wreath.

Unusual christmas wreath with their own hands step by step

Who said you need to use only natural materials? Look at this chic wreath of Christmas balls.

He is a beautiful, festive, even a little glamorous. It can be easily placed not on the door, but in the room. For such crafts it is necessary to take unbreakable balls. Then the wreath will serve you more than one year and will be absolutely safe for children and pets. In addition, plastic decorations are cheaper than glass.

You will need:

balls - for a wreath, as in the photo, it was used about 125;
ring base from a vine or foam;
adhesive pistol.

It is better to use decorations in one color scheme, but different shades and sizes. If you have unnecessary balls, you can paint them. So you will save on materials. For a variety, you can add elements with sparkles.

How to make such a Christmas wreath with her own hands:

Even the child will do

Do you know that even from polyethylene packages you can make a Christmas wreath with your own hands? Photo:

Agree, originally and absolutely not expensive. If you are afraid that the wreath from the door of the apartment can be in an unknown direction, then use this idea. It is also an interesting option for creativity with children. You will need:

polyethylene packages - two colors (1 package each);
white Wire hanger;
scissors;
ribbon;
pin;
artificial sprig of ostolist or other small Christmas decoration and some wires for its attachment (optional).

This wreath is done like this:

Give the hanger round shape.
Cut the polyethylene sachets on the strip of about 8 * 4 cm. Their length and width can be varied according to your idea.
Now simply tie the plastic strips on the hanger, alternating colors. Continue until the wreath becomes lush and volumetric.
Cut extra, sticking strips, but do not overdo it in order not to spoil the round shape.
Tie a bow from the ribbon and attach it to the hanger.
Wire a sprig of a stroke and secure on a wreath.

The second life of old things

By the same principle made a Christmas wreath with her own hands from pieces of fabric.

Decided before the holidays spend a revision in the closet? Turn unnecessary things into a beautiful and cozy ornament. For pomp in this work, the base was used for a wreath of four wire rings, but such a design is quite possible to construct it yourself.

Before the arrival of guests, everyone proves order in the house and hang decorations. And among all garlands, candles and gifts, of course, a special place occupies a Christmas wreath. It can hang on the door or wall, put on the dining table center.

In stores on the eve of holidays, you can see a large selection of wreaths of a variety of designs: with ribbons, balls, candles. But that he was really special and unique, and also cost much cheaper, make it independently. How to make a christmas wreath with your own hands? Very simple!

Here you will find step-step 5 master classes for the manufacture of christmas wreath. Choose which one will like: from balls, spruce, pines, from cones or even from the grid.

First, let's look at how to make a traditional Christmas wreath of ate, which then can be fixed on the inlet or interior door.

Instruments:

straw shape for wreath (size optional),
balls (in size should match the wreath: with an increase in the base of the wreath and the size of the toys increases),
decorations in the form of twigs with red and zloty beads, red ribbon on a bow, pine cones (big and small),
fir branches (thin so that they were comfortable bending),
several other twigs (for example, pine),
scissors, floristic wire (preferably green),
red and gold decorative flower (three pieces).

Spread everything on the table and proceed to work.

Tip: This form can be made independently of dry grass and food film. Additionally, shifting scotch.

Step-down making

Step 1: We make the basis of branches

First, make a base of pine branches. Spread them in the same direction, for example, counterclock-wise, Let the branches of the branches be on the right, and the soft tops of the branches laid to the left. Attach them to a straw wreath, riding around the floristic wire, link down to the base.
Continue adding more and more branches around the form.
Look, not left empty placesFill in all skids smaller skids.
So far, it looks a bit disheveled and infratching. Wrap a little more wire around to pull all the big branches that stick out. Wire must hide behind branches. Now it turned out a uniform lush wreath - the foundation for further work.

Step 2: Decorate Wreath

Now add several other twigs (in the same direction as pine), distributing them evenly in a wreath.
Attach the Red Bow. You can do without it without him, so the kind will be more festive.
You can add small pine shades, if they were not on the branches themselves.
Color distribution should be symmetrical (So \u200b\u200bthat it does not come out that all red decorations are in one place, otherwise it will look like a red spot). Enter the conditionally wreath on the 4 parts, in one of them there is a bow, and in the other three add a branch with red beads.

In principle, it looks good and you can leave it, you can finish.

Idea: or hang wreath first in this form, and in a week add decorations, so the wreath exactly does not get bored for the holidays

Step 3: add more decorations

For contrast, attach several twigs with gold beads.
Fresh pine cones: Wrap the floristic wire around the cone closer to its base, attach to a wreath, fixing well in place. Watch the wire to be visible, as less as possible. At this place, you can also stop, or continue to add balls.
Attach three balls, taking into account all the same conditional wreath division into four parts
Add three red and three gold decorative flower.

You did it! It turned out a wonderful christmas wreath, only to attach to the door to please yourself and the neighbors!

How to make an advent wreath

Following the work schedule described only, you can also Create advent wreath.

By tradition, four candles on it: the first lit in 4 weeks before Christmas, every next Sunday was lit on one more, so it was clear how the holiday approaches.

Now the wreath of this type can be done with traditional considerations and decorative purposes. In any case, it will help create a festive atmosphere.

So, proceed to work:

Create a wreath out of the branches, add small pine shades, as in the previous case.
Breeping with help pistol with hot glue candlesticks (Preferably with hot pins down to insert in a wreath between branches, but the usual will also come off), insert the candles in them.
Decorate wreath with big cones and decorative flowers (two red and golden color).

ATTENTION! Do not leave such a wreath without supervision with lit candles!

Master Class number 2: Wreath of balls

To make such a wreath, you will most likely not have to go to the store for materials. After all clothes rack and New Year's balls There are almost everyone. So choose time to work and go!

You will need:

1 Wire hanger, New Year's red balls (the amount depends on the size of the balls that you have at home),
pliers, nippers (not required),
tape for bow
pine twigs or christmas trees (or garland),
wire or strong thread (better than green).

Step-by-step execution:

Step 1:

With the help of pliers, give the hanger round view. Do not worry if it is not perfectly smooth, the balls will cover all irregularities.
Slide the hanger, that is, discharge it at the place of attachment under the crochet.

Step 2:

Place the wire balls. If its end is too sharp or uneven, cut the laying. After drove all the balls, bend the hook with pliers to secure the circle.
From above near the hook, the balls do not need to hang, as there will be a tape and coniferous sprigs in this place.

Step 3:

From above the wreath on both sides of the hook, attach the branches (tie them with wire or thread).
Make a bow from the tape and attach it under the crochet.
All is ready! Even the hook is immediately there, it remains only to hang!

Master class number 3: wreath of cones

The Christmas wreath of the cones is very simple in performance, but its main thing is to be stored for a long time and does not appear, unlike a fir wreath. It can be sent for storage until next new year.

Materials:

Cones dry from 30 or more pieces, depending on the diameter of the wreath
Foundation under a wreath (if not ready as a photo, cut out torrent cardboard)
Glue gun.
Decor at your discretion.

Order of work:

Stage 1: We put the first circle

With the help of glue-pistol, secrets cones to the inside of the torus or circle.
Inside the best fix smaller cones.
Distances between bumps -1-2 cm. Do not pin them closer. You can even 3-4 cm.

Stage 2:

We are doing the same, but already on the outside of the circle from larger cones. Distances between - 3-4 cm. They must lie freely - do not lay on one another.

Stage 3:

And now fill the middle row - He's like must be from above Interior and external series. You can mount the bumps not vertically up, but slightly directing in different directions, filling the voids.
We make decor with sprigs of berry or vibrant fir.

Tip: If on top of adding garlands - it will be even more effectively!

Master Class number 4: from pine branches

"Just and tasteful" is the most suitable phrase for this method of manufacture. Christmas greens and a minimum of jewelry. But nevertheless, when looking at the door with such a wreath, it becomes clear that it reigns here a really festive atmosphere!

Materials:

form for a wreath of thick wire,
green (real or artificial pine branches, other conifers are also suitable),
cones, wire (for branch binding),
adhesive gun
little bells,
tape for a bow.

ATTENTION! Choosing the length of the shape of the wire, consider that after fastening the branches, the wreath will increase several times in size.

Production Stages:

Take several conifer branches and recruit them to shape with wire. First, lock the ends of the branches, then wrap them around the wire several times, wrapped with wire. Thus wrap the whole base.
Make one more ball of branches On top of the previous one, in the same way. There should be a uniform coniferous wreath.
Attach several cones.
Add 3-4 bell tler Golden or silver color to create a festive mood. Crepe with a glue gun.
Make a bow from the tape and attach it to a wreath.

Each time, opening the door, you will hear a quiet ringing of the bells and understand that the holiday is hung in the air around!

Master Class number 5: Wreath of decorative grid

So the wreath you exactly surprise all the neighbors! This color hemisphere will not leave anyone indifferent, at one glance a smile and sweet anticipation of the holiday will appear on him!

Materials:

round base for wreath from wire,
the decorative grid in rolls of about 50 cm wide (several colors combined with each other),
fluffy decorative wire.

Tip: If you do not have such a basis for a wreath, you can cut it out of dense cardboard with a thickness of the Torah -10-15 cm. Then the mesh mount can be made using a needle and thread or glue-gun.

Production Stages:

Step 1:

Cut Approximately 25-30 cm Grids and roll it into a roll. Squeeze my fingers in the center. To make it more convenient, you can take someone to the helpers to keep convolutions.
You will need a lot of such rollers, they should not be exactly the same in length.

Step 2:

Group rolls together by 4, connecting centers, and bandaging them in this place fluffy wire. Leave the ends of the wire for fastening to the base.
Each such part tie to the basis of wreath (remaining wire ends). They must be tight to each other, not leaving free space.
Continue until all the place is filled.

Ready! It turned out very colorfully and festively! If you wish, you can hang a toy on a wreath to get it in the center. But see, do not overdo it, so that it does not work out "too", because everywhere you need to know the measure.

The ideas of wreaths

In the end I want to note that several ideas for the manufacture of wreaths are presented here. And they, in fact, a lot! After all, it is worth replacing a small detail, make your author's amendment and get a new unique copy! Turn on fantasy and create! Connect the whole family to this process to make the process even more interesting and enjoyable!

Merry Christmas!!!

Designer wreaths 2019.

In 2019, vertical wreaths are included in the fashion, which are not attached to the wall, and on the ceiling, like suspension. The principle of wreath build is the same as described above. BUT

You can place candles on them from above.
Add hanging elements

There is no fantasy. The main thing is to be where to hang it on the ceiling! If you have a chandelier not very - then you can accommodate under it.

We start slowly prepare for Christmas and the new year! This is a magical time, and it is necessary to solve a huge variety of tasks:

than treat guests;

what to wear;

what to choose a Christmas tree;

and how to decorate the dwelling or workplace.

Today we will talk about the last and look at how to make a Christmas wreath with their own hands.

* In the article, a lot of photos to be more convenient to navigate in it, you can use laying.

New Year's wreath on the door and not only

This tradition is more western, but at present, many families in Russia have adopted her, and with pleasure decorate their home with Christmas wreaths. It is understandable, such a decoration looks just great!

Options for such wreaths may be different. They are performed from living branches:

juniper

ordinary IV rhe

cypress

But sometimes it is created from completely unexpected materials, which we will also tell about.

Of course, such a New Year's wreath can be easily bought in the store. But much more interesting to make it with your own hands. In this case, it will truly unique and festive.

Tradition Decorate House Wreaths: History

Before you start making a wreath, let us remember the history of this Christmas decoration. To begin with, we note that such wreaths are two species:

The first is a classic Christmas wreath, which is put on the table and decorate, to everything else, candles. Sometimes it is called "Advent Wreath".
The second hangs on the door (or where you like more).

The history of the first is not so ancient - he was invented in German Hamburg in the 19th century. The legend says that such a theologian lived, a good and pious man - Johann Henry Vihren, who was engaged in the training of poor and orphans.

During the pre-holiday, the kids then and the matter asked him: "Was Christmas soon?". And so to visually show the approach of the holiday, he took the rim from the wheel, decorated it with fir branches, cones and candles - 24 small red and 4 large white.

Every morning he lied on one candle - a little on a simple day and big on Sunday. The kids answered:

When the last candle is lit in the wreath - Christmas will come.

I liked this idea to all citizens, and soon they also began to make such wreaths for the holiday. Later, the tradition passed from Lutheran to Catholics and Protestants.

As for the Christmas wreath on the door, his story is much more older than you can imagine. It is rooted in the Celtic tribes and the celebration of the Winter Solstice - Yol. Yol is one of the holidays of the pagan wheel of the year dedicated to the revival of the solar deity.

Celts made wreaths from juniper, pouring sprigs and mistletoes as an overlap and as a symbol of the eternal annual cycle.

Now the ancient meaning of traditions left, and similar New Year's wreaths is just a cute decoration for the holiday.

How to make a christmas wreath do it yourself

We will look at several options for creating this decoration. From classic with fir branches, to the original of the Christmas balls. But in that and in another case, we will need the basis for which the twigs, ribbons, cones, balls and candy will be attached.

Frame for wreath

The framework for a New Year's wreath can be made almost from anything. Vihren did it from a wooden wheel, but now this item is not so easy to find. We will bypass other materials:

Yol wreaths are traditionally dealt with IV branches, which still use for these purposes.

Other flexible rods are also perfect (cherry and sea buckthorn, for example).

Old newspapers and paper twisted in the ring is a good foundation.

Old garden hose.

The circle can be simply cut from cardboard.

Ordinary wires (even from the old extension cord), twisted.

Hose from under the old vacuum cleaner.

Disposable plastic plate.

The ring can be cut out of foam or foam rubber.

A wire hanger can also be a good basis if you break it out, and then bend again, but already in the ring.

Simple wire, but it is better to take the one that is well bend and keeps the form.

Dry grass or straw assembled together, well tightened and braided in the form of a circle.

In other words, take everything you have at hand and wake them up this "bagel" of suitable sizes. This will be the basis for our New Year Wreath.

The article is almost on the topic: the autumn wreath on the door, how to make it with your own hands?

How to decorate festive wreaths?

Now, when we have the basis, you can proceed to the most important thing - decoration. After all, we already decided what we would be a wreath? Traditionally, it is made of spruce and other evergreen twigs, and it looks like this decoration more elegant.

If you want your wreath to be "disposable", it is better to use artificial materials. For example, in many somewhere in the attic or mezzanine, an old artificial Christmas tree was lying on, here it is possible to put it in business.

Crop sprigs, both artificial and real, the easiest to the secateur.

Do you think that from one fir branches wreath will look boring? Take several different varieties of trees.

The twigs are best screwed to the base closely, and it is so that the frame is not visible. For these purposes, it is better to take a wire in color, tight thread or fishing line. Remember that all twigs should be very tightly fit.

Photo of christmas wreaths on the door

This is a traditional option, out of twigs.

* All photos increase full size.

The NO1 task is made, wreath is ready. Now you should do decor. For these purposes, you can take anything. Here you are limited only by your own fantasy. Here are just a few options for the decor of the Christmas wreath:

ribbons

miniature gift boxes

woolen threads

christmas gingerbread and gingerbread men
artificial fruits and berries (Kalina, Rowan, Blueberry),

mishur and garlands,
orange or tangerine peel,
flowers Puancetics,

christmas toys

cones and other natural materials

and much more.

For "horizontal" wreaths, you can use candles.

Traditional Christmas Tints Palette Next:

There are still a few small secrets that you can take into account when creating a wreath with your own hands:

if you want to attract prosperity next year - fasten a coin on a wreath;
happiness will bring a little horseshoe,
and for good luck, you can attach a symbol of the new year to wreath, now it's a pig.

How to fix the decor to a wreath?

As we said above, the twigs are best tied to the thread. But what to do with other decor elements? How to mount them to a wreath? There are several options:

Chestnuts, acorns, nuts, flowers, berries can be easily glued to the surface with a glue gun.

Christmas balls can be attached with thread or wire. You can also glue them, it all depends on the decoration itself.

Tapes can be beautifully wrapped around wreath, bows tie on it. In extreme cases, you will always help good glue!

Advent Wreath (Photo)

* All photos are clichel and increase.

Make a New Year Wreath of Candies

Sweet original New Year's wreath will definitely delight your guests, especially small.

Wreath on the door of the Christmas balls

A wreath of Christmas tree toys always looks winning.

Very often for decorating the room, wreaths create a festive mood to create a festive mood. Decorative wreath can be made to any holiday. But sometimes it creates difficulty at its creation at the very beginning of the creative process - there is no foundation for a wreath. Today I will tell you about 10 ways to make the basis for a wreath with your own hands.

First method

The easiest and most cost is to buy a ready-made basis for a wreath in the store. The finished bases are made of foam, grape vines, rother, straw, iron rods. You already choose a material that is more suitable for your composition.

Second way

The second way suggested Igor Linnik. At first, it is necessary to cut the stencil base of the future wreath. By the way, it does not have to be a ring, a form can be any - a circle, star, heart.
Further using some thick paper (packaging paper, newspaper) you need to create a volume of the future wreath. The paper should be tightly compress and with a rope or wire join with a cardboard stencil, carefully equal to it.
The result was a great basis for a wreath.

Third way

The basis for a wreath is easy to make paper, even without a stencil. Just forming the hands with your hands that you have conceived. It can be said that this is a lightweight variant of the previous way.

Fourth way

Make a paper base for a wreath in another way. Screw from the newspapers of the tubes and form the ring from them, gluing the tubes around the perimeter.

Fifth way

If you are planning a small wreath, the basis can be cut from aluminum baked form. The form of a future wreath will depend on the configuration of the baking form - round, square or rectangular.

Sixth way

What is just not made of plastic bottles! It turns out that the basis of the wreath can be made. It is necessary to cut the bottles, connect them between themselves into the ring, covering with glue or scotch.

Seventh fashion

The basics for a wreath of foam can be bought in the store, but you can make it yourself. Polyfoam can be taken packing, and you can buy a sheet of foam in a construction store. It is necessary to apply the circuit of the wreath on the foam and the sharp stationery knife cut the base.

Eighth way

In my opinion, such basics for wreath are very pretty and practical. I made the basis for the heart in this way.
To work it will be necessary to the insulation for pipes. You can take remnants from repair or buy plumbing in stores. There is such a penny insulation. You can buy a different diameter insulation, the choice is very wide.
Everything is done very simple. Sut off the insulation of the desired length and ends glue. Only there is one little trick. In order for the basis for a wreath to keep the form and was not curved, bending the insulation should be seamless. As a result, you get the perfect round basis for a wreath.

If the insulation of a large diameter and bends not very good, then you can glue the ends with a piece of pipe.

Ninth way

The basis for a wreath can be formed from cardboard tubes from under toilet paper. They should only glue together and consolidate with painting scotch.

Tenth fashion

Some craftsmen for the manufacture of wreaths use hangers for clothes. Two laps are formed from the hangers, which with the help of a bandage or wire are connected to each other.

If there are no wire hangers, then let us go into the course of ordinary plastic.

When the basis for a decorative wreath made by hand is ready, you can include fantasy and decorate a wreath depending on the holiday and your equipment.

Check out the master class on the manufacture of a wreath of wreath of deciduous trees.