How to make angel wings at home

Wrap the wing frames with wire. Wind the wire around both frames. At the same time, make small loops from the wire. These loops should have a diameter of about 2-3 centimeters. Using wire and loops, you will secure the wing frames to your back. Use hot glue to secure the wire to the needles properly.

• If you find it difficult to attach the initial section of the wire to the frame, glue it. The wire will stick to the frame and you can unwind it.
• There should be about eight stitches on each needle. Thus, there will be approximately 16 loops per wing.

Cut out pieces of cardboard. For each wing you will need 4 cardboard triangles. These triangles do not have to be the same size. It's okay if there are gaps between the needles and the cardboard, as you will cover them with a T-shirt and feathers. Try to make the triangles have an obtuse angle and be isosceles - in this case they will fit better with the frames.

• Make sure that the four triangles for one wing are approximately the same size and shape as the four triangles for the other wing.

Attach cardboard. Before connecting the cardboard triangles with wire, lay them out so that you get the shape of the wings you need. Then, using the remaining wire, attach the triangles to each other and to the knitting needles. It is normal for the cardboard triangles to wobble slightly.

• The shape in the form of eagle wings works well, especially in a half-expanded position.
• You can also search the Internet for images of angels and choose the appropriate wing design.
• Cardboard triangles do not have to look perfect and even. You will still cover them with feathers!

Cover the frames. Use old t-shirts for this. Cut off the sleeves and pull one T-shirt over each wing. Secure the t-shirts with hot glue so that they follow the outlines of the frames.

• It is possible that you will have to cut the T-shirts.

Attach the feathers. Glue the feathers onto the T-shirts using hot or other strong enough glue. At the same time, make sure that the ends of the feathers protrude outward. Position the feathers parallel to each other - in this case, the wings will have a neater look.

An angel costume usually consists of three main parts: a white dress for a girl (or a long white shirt for a boy), a halo and snow-white wings on the back. This outfit can be worn for Halloween or New Year's masquerade. But not everyone knows how to make an angel costume with their own hands.

Let's look at several options, and, based on the materials you have, choose how to sew an angel costume for your favorite angel.

Feather wings

So that your child can go to a New Year's party or Halloween as a real angel, make him wings from real feathers. They can be borrowed from any poultry farm or from a grandmother in the village.

We will need:

• copper wire in an insulating braid - 3 m;
• a template cut out from a newspaper;
• thin thick cardboard;
• any white fabric, but knitwear is better - 0.5 m;
• glue "Moment";
• large feathers of a white duck or chicken;
• downy feathers;
• downy boa or rabbit fur;
• double-sided tape and regular;
• scissors, pliers.

Work order

1. We bend the wire around the perimeter of the template with pliers. Start at the base of the wing. Then you can use the remaining ends to attach the wings to your back.
2. We cut out two wings from cardboard according to the template and attach them inside the wire frame with adhesive tape. Then we glue the white fabric cut out according to the same pattern with a hem allowance of 1 cm (4 blanks) on both sides.
3. We glue down feathers around the perimeter, masking the wire frame.
4. Glue the largest feathers in rows. They have smaller feathers.
5. We decorate the top of the wings with fluff, covering the tips of the top row of feathers. Glue the boa. If you have pieces of white rabbit fur lying around, consider that its time has come. The wings are ready. Do not forget to sew on two straps so that the whole structure can be put on your back like a backpack.

foil wings

With these shiny silver wings you will conquer the whole Halloween. For feathers, you can take the usual tetra-packages metallized from the inside from under milk, juice or wine.

1. To cut a feather, you need to fold the blank in half and cut out a crescent.
2. Without unfolding, make a fringe.
3. Cut out two wings from thick cardboard and paste over them with “silver” feathers on both sides, starting from the bottom.
4. Fasten the wings together with wire and come up with a mount for your boy's back.

Very simple

I want to impress my friends on Halloween, but not everyone can collect so much foil, especially since not everyone has access to duck and chicken poultry farms. Now you will learn how to make an angel costume from ... cardboard disposable plates. You will have time to make this costume even if Halloween starts in two hours. It is clear that for this we need a lot of paper plates.

1. Set aside three plates, and draw two symmetrical arcs on the rest. Cut the plate along these lines. Throw out the middle, the two extreme crescents will be our feathers.
2. Divide the "feathers" into two equal piles and fold them in two fans as shown in the photo, fixing with glue along the edges of the plate.
3. To hide the ugly ends, glue a second plate on top of them.
4. Glue two straps and hide their ends under the third plate.

Light angel wings for your girl are ready, and she can wear them for Halloween.

Angel Costume Patterns

An angel can go to Halloween in any suitable dress, even in a nightgown. But if his wardrobe does not have such “angelic” clothes, we suggest sewing a dress according to the simplest patterns.

Since angels come in different sizes, the pattern is given conditionally. You can, for example, calculate the scale from the circumference of the chest and draw patterns. With a fabric width of 80-110 cm, you can calculate how much fabric is needed: 2 shelf lengths + sleeve length. With a width of 120 cm: front length + sleeve length. With a fabric width of 140 cm, one length of the dress will be enough for you, and the sleeves are cut out from the rest of the width.

Nimbus

Well, what is an angel without a halo?! It is very easy and simple to make it from copper wire. We also need a regular hairband.

1. Make the halo itself first. Roll it from the wire, leaving the two ends hanging down on opposite sides. Decorate it with white fluff if you are going to Halloween, or tinsel if you have a New Year's party ahead of you.
2. Attach the two ends of the wire to the hoop and mask them with white tape. So the costume for your angel is ready.

Angel wings made of paper can be of various shapes.

First, let's decide on the initial shape and size.

Let's draw a sketch on paper in real size. If everything suits, we transfer it to cardboard - this will be the basis of the frame.

Usually the wings are attached like a backpack with straps made of, for example, rubber bands.







This video presents a master class on the manufacture of angel wings.

For such wings, you need white corrugated paper wire and a little fluff.

Twist the wing frame from soft aluminum wire. Glue white corrugated paper to the wire with PVA glue. Since the angel is white and fluffy decorate with white fluff on top.



The easiest way to make paper angel wings is to take paper plates, cut them in half and glue cardboard wing blanks over.



But if you need wings of a small size, then you can stick it directly on the plate.

Glue Moment Crystal.



We make fastenings from a wide elastic band or satin ribbon. Glue the crystal at the same time.



You can make wings from whatman paper, but here the pimples will have to be cut out right on the spot.



But most of all I liked the original version of the wings made of tinted, newspaper cups for seeds. Just a masterpiece :)



It is also very easy to do. Wings are cut out of cardboard and kulchki are glued to them in a dense row. And if you toned them with white sparkles from a spray can or liquid snow, it will turn out just magically.

In order to make do-it-yourself angel wings with your own hands for a carnival costume for the New Year or for a photo shoot for Valentine's Day, you will need quite a bit of material: chintz to create feathers on the wings, thick fabric for the base of the wings, cardboard for the template of the wings.

We cut out a wing template from cardboard, for example, this:



Then we cut out two identical parts from the fabric according to this pattern and sew them together:



Then we start gluing chintz on them from the tip of the wing to imitate feathers:



And in this way we glue our wings from bottom to top to the end:



Then you need to tie a ribbon to attach the wings and decorate as desired:



Read more here.

A fairly simple version of making wings for an angel, made of paper with your own hands. And, of course, what is an angel without limbo.

For the manufacture of wings, bend in two arcs of wire 2-3 mm. Steps, in a checkerboard pattern, stick strips of paper on the arcs. You will get falling paper feathers. We will cover the arc with tinsel. Here are our wings.

Limbo is even easier. The same wire for the rim, stand and hoop. The same tinsel glued along the edge of the disc.



Angel wings at home for a costume can be made from different materials. It is convenient to make a frame for the wings out of wire, and stretch fabric between the wire or glue cardboard or paper.

You can also cut wings out of cardboard.

First option. We make wings out of cardboard and glue napkins or coffee / tea filter bags over the entire area, decorate to your taste.



Wings must be cut out of cardboard.







Both of the wings must be glued.



We glue the wings with newspaper or unnecessary notes over the entire area.



You can also cover the paper with cloth.



Let's prepare filters from, tea or napkins, put them in several layers. To do this, we bend the filters or napkins in half and again in half.

Angel wings are an indispensable attribute for an angel costume if you want to make it for your child for a New Year's party or school theater, or for yourself for the purpose of a photo shoot.

There are a huge number of video tutorials on the Internet on how to make large or small angel wings for a girl out of paper, cardboard and other improvised things.

Naturally, there are a lot of such master classes, and we will share only a few of them.

DIY these wings are very easy to make.. The materials for their manufacture may be different. The frame for them can be made on the basis of a wire, between which a fabric will be stretched or cardboard (paper) will be glued.

In the simplest version, they are cut out of paper or cardboard. Next, we act like this:

At the end, to attach the paper wings to the angel costume, glue Velcro to the wire. You can sample.

In other workshops for making angel wings from cardboard or paper, it is proposed to fasten them with a wide elastic band. You also need to make straps for the hands. A hole is made at the base, then the elastic is fixed on both sides, and the place of fastening is masked with feathers from filters or napkins. When you make straps, do not forget to pre-calculate their width and height.

Gallery: do-it-yourself angel wings (25 photos)

How to make wings for a costume with your own hands: master class number 2

Naturally, you can make wings for an angel costume with your own hands in different ways, and doing it from paper and cardboard is the easiest way. But for a matinee in the garden, this will be enough. But for a theater or a professional photo shoot, something more serious will already be required, you may need the help of a professional.

But now we'll take a look at one more angel wings tutorial from paper and cardboard.

In this option, prepare:

Let's get to work:

• think over the layout, what shape and size the wings will be. Do not overdo it so that butterfly wings do not turn out instead of angel wings. Cut them out of cardboard and glue them with white paper. Let dry under pressure;
• we try on the wings on a child or ourselves to find out the location of the elastic bands. Between them, the distance should correspond to the width of the back. We sew elastic bands on the wings like on a backpack. You can attach with a stapler. Glue the places of fastening or sewing with white paper;
• decorate the wings. We have considered the option of decorating with napkins below. Another option is a synthetic winterizer decoration. It can be purchased inexpensively at a fabric store. We sheathe the wings with a padding polyester, best of all in two layers. If you want the wings to be fluffy and stylish, then the synthetic winterizer needs to be cut with an allowance along the edges with a margin of about 5 centimeters. We glue it on cardboard, and only then cut it out.

Another option for decorating is with a white boa. So the angel wings will look more original. First, we glue them with paper, then with synthetic winterizer, and boa feathers are sewn along the edge of the wings.

The third master class on making angel wings with your own hands

This tutorial will show you how to make big angel wings for the costume. The rest of it can be a long T-shirt or nightgown. But the wings will need to be made from improvised materials.

To work, you will need the following:

Now we offer an algorithm of actions for making wings according to this tutorial:

Down feathers can be replaced with goose feathers, if possible. But they will cost more.

Wings are one of the most common elements of children's and adult carnival costumes and outfits. They can be dark menacing, avian and diabolical. However, the wings of an angel are in the greatest demand. It is very easy to make angel wings with your own hands.

We make do-it-yourself angel wings in a step-by-step master class

To make the wings for the costume, you need to decide what size they will be.
Wings should be comfortable, not interfere with movements. If they are intended to be held by the hands, handholds or wrist ties must be provided. Depending on whether the arms are completely closed, or the wings are clearly behind the back, the base is selected.

It is convenient to use cardboard for the base. It is durable and easy to cut with regular office scissors. The low cost makes it an easily accessible material. Every home has a cardboard box that can be used for crafts. For small wings, a shoebox is suitable; for large wings, packaging from a refrigerator, TV or washing machine is useful.

First you need to decide how the wings will look. There are many options for imitation of the pen. You can cut out only the base of cardboard, and glue real feathers layer by layer on it. Instead of real ones, paper analogues are often used - they are cut out of paper and also glued onto the base.

Wings with feathers cut in cardboard will look no less impressive. To work in this case, it is necessary to take a very dense multilayer packaging material. First, a halo of the wing is drawn - an open wing, folded, directed upwards with a wave or lowered down. And then feathers are drawn on the cardboard. Each feather is cut with a clerical knife so as not to cut through the base to the end. Several layers of paper must be left untouched.

The resulting feathers are slightly lifted up to give the paper more naturalness. To make the wing look natural, spray paint is used for painting. With a brush with acrylic paints, if necessary, shadows are applied.

It should be borne in mind that cardboard wings will be quite heavy. If you need to make an easy option, then paper modules are better suited. The manufacture of such a wing describes the master class well.

Modeling a Wing Using Beginner Templates

To make light and openwork wings, you will need a few materials and a lot of patience.

For work are used:

• 2 sheets of A3 paper;
• pencil;
• glue;
• scissors;
• organza, lace, tulle or any other light and transparent material;
• satin ribbon, 2 m;
• a rain of silver or gold.

First of all, a wing halo is drawn on paper. It is necessary to cut out two such wings, place them with their tips away from each other, and then fasten them in the middle. For fastening, the wings are glued onto thick cardboard or a sheet of whatman paper, and then 3 holes are made in the center on each side of the base sheet. A ribbon will later be threaded through these holes, with which the wings are attached to the back.

From the fabric chosen for the base, feathers are cut out. There should be enough of them to cover the entire surface of the wings. Now, using a glue gun or PVA glue, the feathers are glued to the base. You need to start gluing from the bottom so that the upper modules step a little on the lower ones and overlap each other.

Corrugated paper can be used instead of fabric. It is cut into long strips, about 2 by 7 cm, and glued in the same order as the fabric.

When all the feathers are firmly held on the base, a tape is threaded into the pre-made holes. Rain is attached to the top of the wings using the same gun.

The result is light and elegant wings that can be used for a costume party or a children's party.

Interesting wings are obtained by cutting holes in the paper. To do this, on a large sheet (about A2 format), two symmetrical wings are drawn, interconnected. Then, on each wing, again symmetrically, semblances of feathers appear. These feathers are cut with a clerical knife. You can cut them out completely, then you get beautiful holes, or you can make cuts only in the lower part so that the feathers are translucent.

If you additionally decorate them around the edges with real feathers, there will be a complete illusion of an angel's wing. Any fastenings are used, they can also be sewn directly to the festive outfit.

Video on the topic of the article