Regulations 

Simple crochet slippers patterns and description. Crocheted slippers (the simplest, from squares, footprints and children's version) with diagrams and a step-by-step description of the work progress

Tired of bulky room slippers? Then crochet stylish, lightweight and very warm slippers.

For adults

Of course, the division into adults and children is rather arbitrary. For those who know how to knit, it will not be difficult to knit the same slippers for mom and daughter - you get a wonderful "family bow", that is, a family set. You just need to correctly calculate the number of loops. Choose the right model and knit according to our step-by-step descriptions.

Ballet shoes

Neat knitted ballerinas-slippers look very elegant, and warm their feet no worse than usual slippers. Knitting master class with patterns from

To knit such ballet slippers you will need:

  • yarn of two shades (skeins of black wool or semi-wool and a skein (50 grams) of raspberry or other shade);
  • hook number 3.5;
  • scissors.

It will not hurt to stock up on patience, because the process can take several hours.

So, first with a black thread in 2 additions (if you chose a yarn with a thickness of 100 m, 100 grams or more, then you can knit in one thread as well) we will knit a simple insole sole: (photo 2, 3), using this scheme for it:



Attention: the scheme is designed for size 39-40, therefore, for size 37-38, you can initially dial 2 smaller loops.

In the 3rd row of the scheme, we knit 16 single crochet, half crochet and 7 double crochet to the place of additions. In the 4th, we knit a couple of stitches less and, accordingly, a couple of stitches with a crochet more.

After that, we take the raspberry yarn (we used the "Children's novelty" in 2 additions) and with columns without a crochet we begin to tie the entire sole around the perimeter: (photo 4).

This makes 88 columns. The first row is ready: (photo 5).

You need to connect 4 more: (photo 6, 7).


After that, we knit the single crochet again, and in the place of the toe we cut the loops according to the scheme: (scheme 2).

We define the center of the toe as follows: fold the ballet in half and mark 2 central loops. And we will begin to reduce them. This is how it should turn out: (photo 8, 9).



Next, we knit another row of black yarn: (photo 10, 11)


Video on knitting moccasins:

Baby

This master class by Anna will tell you how to knit bright and soft slippers for a little princess very quickly and easily.

For knitting you will need:

  • Yarn Alize Lanagold lilac and pink, yarn "Children's novelty" yellow and green for a flower;
  • Hook 3 mm;
  • Scissors;
  • Needle.

First, we will tie the sole. We collect 12 air loops with lilac yarn. In the 2nd loop from the hook, we perform 2 single crochets. Next, we knit 1 column in all loops, except for the last one. We will knit 3 columns in the outer loop.

Now you need to find the center loop on the rounding on both sides. From the central loop in both directions we count 1 loops. That is, we select 3 loops on a rounding from 2 sides.

In these 3 loops in the new row we will knit 2 single crochets, and in all the remaining loops 1 column. That is, in total, we will knit 2 columns in 6 loops of a row.

In the new row, go up 3 loops instead of 1 double crochet. At the same point we knit 1 more half-crochet. Next, we knit 2 half-columns in the next 2 loops. Then we knit in 9 loops, 1 half-column with a crochet. Then we go to the single crochet and knit. In 6 loops on the rounding we knit 2 single crochet stitches. We knit on the second side in the same way.

We connect in a 3 lifting loop.

We unfold the knitting and knit the front convex columns without a crochet in a circle without increments.

Cut the thread. We take the pink thread. From the central loop of the heel, we count 7 loops in both directions. We mark these loops with markers. Attach the thread to the left in a loop with a marker. We knit single crochet stitches to a new loop with a marker. We remove the markers.

Now mark the center loop on the toe and count 4 loops in both directions. We mark the loops with markers. We turn around at the beginning of the row and make a decrease. Next, knit until stitches with markers. We knit 2 loops from marker to marker. And then again, 1 stobik without a crochet. At the end, do not tie 1 loop.

Now we move the markers back to the loop, that is, grab 1 more additional loop. We start a new row with a decrease. Then we knit up to the marker. From marker to marker, knit 2 loops again. We finish the row without tying the loop. Move the markers to the loop again. We repeat the previous row.

In the new row, we knit only with a decrease at the beginning of the row and at the end. Do not subtract more in the center.

We knit the same slippers. It remains to knit the decor. Let's link a simple one. Take the yellow thread and make a sliding loop. Next, 3 loops and knit 2 double crochets inside. Then 3 loops and a connecting post. So we repeat 4 more times. We tighten the sliding loop.

We will knit a leaf from a green thread. Cast on 5 stitches. In the first loop we will knit 1 single crochet. Then we knit 1 column, and in the last loop we perform 3 columns. We tie a row of 1 single crochet.

Sew on a flower, placing a leaf under it.

We knit 1 more flower and leaf. Sew on the decor for 2 slippers.

New bright slippers are waiting for little feet:

And also children's models - step-by-step descriptions on our website:

Do you like the product and want to order the same from the author? Write to us.

In order not to forget the page address and share with your friends, add to yourself on social networks:

Slippers are such a homely, cozy, warm thing. They are worn by all, without exception: children, adults, boys and girls. The range of these shoes is quite diverse. Which one do you prefer? What is the main characteristic of such shoes for you? I would like to note that knitted models are, of course, considered the most comfortable and warm. Knitting is not difficult at all. There are several options that even novice craftswomen can easily perform. We will talk about them a little later. And now about what you need to make home shoes.

Necessary materials

Crocheting slippers is pretty simple. The first thing you will need is, of course, a hook. Its size depends on the yarn used - the thicker it is, the larger the number. Now about the threads. The most suitable option for winter models is considered to be natural woolen yarn, but not 100%. In order for the slippers to serve as long as possible, it should contain only 50% wool, and the remaining 50% are synthetic threads. For the summer version of home shoes, any cotton thread with various additives is suitable, as long as they are not too thin. You may also need various accessories to decorate your shoes. These can be buttons, laces, laces, decorative artificial flowers, beads, and so on. The design of home slippers will only depend on your imagination.

Children's slippers are very popular. Crochet patterns for babies can be delicate and sophisticated, warm and fluffy, bright and funny. Any option made by the hands of a mother or grandmother will surely please your baby, which means that he will be happy to wear them.

Crochet slippers. For beginners - the easiest way

We start with air loops (5), connected in a ring. Next, we tie the resulting ring with crochet columns row by row (as in the figure) until we come to the place where the slot for the leg is formed.

Leave two stitches uncovered and continue knitting in the opposite direction. Having reached the left unclosed elements, we turn back. So until the very end, until we reach the desired size. Now you can connect the two pieces of the backdrop. This is done with a crochet hook or with a needle. The slippers are ready! The second is performed in the same way as the first. In this version, there is no difference between right and left. To give the slippers a finished look, you can tie them around the edge with a contrasting color yarn, insert a satin ribbon or sew on beads. Decorations located in the center look beautiful - knitted bows, flowers or buttons.

Slippers knitted in the way described above, but using a different pattern, for example, openwork, look very unusual. Try different options. Surely you will find for yourself the easiest and fastest way to crochet slippers.

Yarn leftover slippers

Another model of home shoes is made from separate fragments made with a crochet hook. Such slippers turn out to be very bright, since all the remaining yarn remains are used. Ready-made square-shaped elements are sewn together in a certain order, as a result of which warm and original slippers keep your feet warm. The size of such a model depends on the size of the fragments.

Crochet slippers - what could be easier? And, you must admit, such cute little things will always be a welcome and unique gift.

Crocheted slippers are best done on the sole or insole. The insole can be felt, leather, fur. You can cut the sole from the tops of old boots.

Home slippers are crocheted from individual 6-sided motifs. It is advisable to take the insole one size larger. If it is uncomfortable with a simple insole, buy an orthopedic one.

For work you will need:

  1. Cotton yarn like "Violet" - 150 grams.
  2. Hook 3 mm.
  3. Insoles.
  4. Scissors.
  5. Awl or thick needle.

The yarn must be connected in two strands, and if the yarn is thin - in three. The knit should be tight so that the slippers keep their shape and are comfortable. First, we tie the insoles, which we pre-pierce with an awl, stepping back from the edge 0.5 cm.The distance between the holes is 0.5 cm.

When tying, we use single crochet posts, two in each hole. Then you need to measure the length of the tied insole around the perimeter in order to calculate the length of the motive in the future.

A prerequisite is that the length of the side of the motif, multiplied by 8, must be equal to the length of the insole along the perimeter (if necessary, you can change the scheme by removing or adding rows to it).

We collect slippers. To do this, take three ready-made motifs and sew them according to the following scheme: sew the sides marked with the number 1 with one front seam. Sew the sides marked with the number 2, getting the back seam. In the future, we will sew the sides under the number 3 to the insole. Leave the sides marked with the number 4 not sewn.

You can crochet the motifs from the outside, or use a needle and sew them on the inside - as it is more convenient for anyone.

You should get this kind of work:

Chip the details together with the insole with pins or sweep them by moving the nose to the right or left of the central part. This will make the right and left slippers. We tie our sneaker to the insole. We got comfortable slippers.

For these variegated slippers, it's best to use a felt sole. Optionally, can be replaced with cut from leatherette or fur.

For work you will need:

  1. Yarn-wool or wool with acrylic - 150 grams.
  2. Hook 3.5 mm.
  3. Felt insoles.

We start knitting with a sock. The pattern can be any, the main thing is that it is convenient for adding. We knit with a crochet pattern. We make additions to the little finger, that is, 4-5 cm.

At the level of the rise, we go to the sidewalls and begin to knit like this.

This is how the canvas turns out. Similar to the letter P. Length is determined by attachment to the foot or insole.

Here is a knitting pattern for the beginning of a sneaker.

Sew back seam. We do this without breaking the thread, from bottom to top in single crochet columns.

We continue to knit in a circle. The height of the sneaker depends on your desire.

We attach the top to the sole, secure with pins for easier sewing.

Sew the top to the sole with an over-the-edge seam. Better to take a tighter thread.


These comfortable warm slippers are perfect for both children and adults. This model has a knitted and leather sole. For work, you need wool yarn (you can have leftovers) and a small hook. The scheme is given for 37-38 foot sizes. If you need a different size, decrease or add the number of air loops. We collect 22 air loops and knit a trace according to the scheme:

For one sneaker, we need two knitted footprints. Below is a trace for children's slippers, for them to dial 18 air loops (given for comparison).

To begin with, we take one footprint and begin to knit sneakers from a row of concave embossed columns.

Here's what you should get.

Back side view.

We begin to make reductions from the third row.

We do the subtractions like this: 3rd, 4th, 6th and 8th rows - subtractions on the central five columns. We knit the 1st, 3rd and 5th convex columns together, as unfinished, skip the 2nd and 4th.

5th and 7th rows - on the central nine columns, we make decreases, knitting the 1st, 3rd, 5th, 7th and 9th raised columns together, like unfinished columns. The 2nd, 4th, 6th and 8th are skipped.

We knit the second slipper like the first.

Cut out the sole from a piece of leather, a little less than a trace. Sew on the sole on a typewriter. If you don't have a typewriter, you can do it manually.

We attach the blank to the sneaker and sew it on.

Master - class: Knitted slippers "Three flowers"

Size: 38
For work we need:
... 100 g of red yarn Romance produced by KAMTEX (50% wool, 50% acrylic, 120m / 100g);
... 100 g of gray Romance yarn produced by KAMTEX (50% wool, 50% acrylic, 120m / 100g);
... a skein of jute produced by KAMTEX to increase the wear resistance of the sole and massage the feet;
... hook No. 4, hook No. 2.5;
... sewing threads of gray and red color for sewing flowers;
... scissors;
... 4 hours of time;
... good mood.


Types of loops:
... Air loop
... Column without crochet
... Column with 1 crochet
... Column with 2 yokes
... Connecting post.

Work description:
1. Patterns used in knitting


2. For the sole, use red thread and jute crochet thread # 4 to dial 23 loops. Knit according to the scheme (fig. 1)


3. Tie the pigtail on both sides with double crochets. Add 6 stitches on each side to round off the edges.


4.3 row at the toe we knit with columns with 1 crochet, and at the heel without crochet (see Figure 1), increments according to the scheme
At the end of the row, cut the thread.


5. Take out the thread from the middle of the red ball. Next, we knit in 2 additions.


6. Having departed from the edge of the heel 5-6 cm, we begin to knit the 4th row towards the heel.


7. We tie the heel of the slipper loop into the loop (see diagram in Fig. 1)


8. We tie the row to the end.


9. Take out the thread from the middle of the gray skein. We continue to knit in 2 additions with gray thread 5th row. (see diagram in Fig. 2).


10. We tie the heel with a gray thread.


11. On the toe, we make subtractions according to the scheme in Fig.2. We tie the row to the end.






12. We continue knitting 6 rows with a red thread in 2 additions. Decreases on the toe according to the scheme in Fig. 2






13. On the seventh row, we make decreases on the heel according to the scheme (Fig. 2)


14. Decreases on the toe, also according to the scheme in Fig. 2




15. We tie the top of the slipper with a red thread in 2 additions with single crochets. Subtracting 3 loops on the toe and one on the heel. Cut and thread the threads. The slippers are ready!


16. Crochet number 2.5 knit elements for flowers. In order to tie the stamens, we collect 4 air loops and tie them with single crochet columns.


17. It turns out such a stamen. We knit the flower according to the scheme.


18. We attach all the other elements.


19. These are the flowers you get:


20. Fasten the stamens on the slippers by tying the ends of the thread inside the slipper.


21. String the stamens onto the stamens.


22. Fasten the petals with a sewing needle. Slippers with flowers are ready!


23. By analogy, we knit the second slippers. And we wear it to your health!

Beautiful and cute home slippers will decorate any home. Meanwhile, you can make such a charm yourself. All you need to create your own little masterpiece is threads and a hook (or knitting needles). In addition, the person should know the rules of crocheting for beginners. To do it yourself, very dense threads are used.

Some stores even have an indication on skeins that they are used to knit slippers. For a novice needlewoman, puzzled by the question of how, it is best to master it with a specific example.

Beautiful and interesting sneakers will fit perfectly on the leg and will delight the eye. However, initially the leg is measured in height and width, and according to the measurements, a pattern is made. To understand how to calculate a pattern and make it, take a look at the photo below.

Pattern of slippers

Suppose a person makes slippers as a gift, and he cannot try on the donee's leg, then a sign will help.

size table

Crocheting slippers on your own is easy, usually even inexperienced craftswomen can do it. When all the necessary blanks are made, selected, we proceed to the execution of the sneaker.

  1. We do the heel first. We collect loops in the amount that is needed.
  2. We look at the patterns to clarify their number and density.
  3. After that, we crochet the single crochet.
  4. Add one loop on each side until the heel is finished.
  5. Next, we will make the canvas to the middle of the foot and again add one loop from the beginning, and then at the end of the row.
  6. We knit our fabric to the end of the little finger.
  7. After we do this, we subtract from both sides in an even manner with about 3 or four loops.

Now we create the upper part of the slippers step by step.

  1. We make it from the bottom up, making subtractions.
  2. We collect as many loops as necessary.
  3. We knit single crochet, and in the middle we subtract every 3 rows.
  4. We continue our knitting until we have made the height we need.
  5. It remains to assemble the product. We connect the sole and the upper part.
  6. And at the edges we knit connecting posts.
  7. When we made the slippers, we knit the second one.
  8. If you are crocheting slippers for the first time with your own hands, you can first use one color. But then you can make multi-colored - from two or 3 tones.
  9. At the end of knitting, we decorate our slippers with pompoms either.

You should get such cute slippers:


Slipper squares are used as part of the motif. You can make other things with the same squares - for example, a scarf, and more. Now let's move on to the example for the slippers.


DIY square slippers

Do not forget about the pattern for the slippers - it must be done. Then we knit motives, while choosing simple patterns for knitting sneakers for beginners, or you can use the one presented below.

Knitting pattern for slippers

Such a knitting square is called grandmother's. To create it, create a chain of 4 loops, make a circle. The beginning of the row consists of three lifting loops, and at the end there must be a connecting post. Further, at the beginning it knits less than in the next arc.

Perhaps you do not quite understand how to crochet slippers with such squares. Experienced knitters advise trying to make 1 square for the pattern. Then it will be easier for you to navigate.

  1. The first row consists of 11 double crochets, which are tied into a ring.
  2. In the second row, knit two double crochets in each previous column. These two posts are connected to the following air loops (one piece).
  3. The third row is done this way. The previous row had air loops. Of them, 3 double crochets are made, which are connected to the next three columns with air loops - once 3 pieces, and 2 times one at a time.
  4. We make the 4th row. Our instructions will help you. We knit 3 air arcs from the third row like this: two double crochets, then 1 air loop, then one double crochet, again one air loop, and end with two double crochets. These arcs are connected by 1 air loop. An arc was made from one air loop. We knit three columns from it and connect with the next 1 air loop.
  5. The fifth row will be our last. In an arc consisting of two air loops, you need to knit 3 double crochets, connect 1 time with 3 air loops. The second time we connect one air loop with the column that comes next. In an arc, consisting of one air loops, we knit 3 columns with a crochet. We connect with the next 1 air loops.

This pattern for crocheting slippers for beginners helps to create a solid square or multi-colored. Slippers are combined as follows: connecting posts. Combine 4 squares, one large square is obtained, which I unfold in the shape of a rhombus. Another one of the same is applied to the edge of the lower corner, sewn together, the heel is sewn to the sole.

Then the side triangle and heels are divided into three parts. We sew all adjacent parts. When our sneakers are ready, we tie them on top with half-columns in the amount of 1 row.

To sew such slippers without a single seam, first we knit the sole according to the pattern that can be seen below. And our master class and tailoring will come to your aid.

Seamless slippers

We collect 23 air loops, in each row there are 3 air loops at the beginning. They are needed in order to raise the row, so they are left.

Knitting pattern without seam slippers for beginners:

Knitting pattern for seamless slippers

  1. 1 row. We knit two double crochet, then one st.s / n. Having reached the end of the chain, we knit 4 columns in the last loop. We knit a circle on the other side of the chain - 1 half-column in each loop, then you need to knit three columns with a crochet into the very first loop.
  2. 2 row. 3 lifting loop - to create 3 double crochets. Then in a circle we knit 15 columns with a crochet in each loop, another 20 half-columns, then 14 columns with a crochet, and between the loops two columns with a crochet.

Now we need to make up. Pull 3 air loops from the heel half-column. We break off the thread. We knit the first row with 56 double crochets. The second row is in this way: first there are three columns with a crochet and two columns made from one loop, 5 columns and 2 more also from one loop. Next 12 columns.

We skip one loop, make a rapport: two columns with a crochet from 2 knitted together, two loops with a crochet 2 times, we knit two loops together, from them we make a column with a crochet. Then we make 2 loops together in one column and two more columns, make a report, and knit 10 double crochet columns.

The third column consists of 26 double crochets, with two columns from one loop, then one double crochet. repeat 5 times and finish with 10 double crochets.

The fourth row is almost like 3, only 25 columns. Similarly, 2 columns from one loop and two columns with a crochet. Continue 6 times, then make 8 double crochets.

And finally, the fifth row, consisting of columns with a crochet, with which the slippers are tied.

We hope you figured out how to crochet slippers without a seam with your own hands. To decorate the edge of the sole, a crustacean step is used, and then we create a second slipper. Our beautiful slippers for beginners can be additionally decorated with embroidery or beads.

There are a lot of different models that you can make yourself with a hook and thread: flip flops, shoes, sneakers, in the form of some toys. To make such a pleasant surprise yourself, you just need patience, imagination and a little free time. You can also additionally watch the video instructions for children's slippers and products on the soles: