Regulations 

Hat berry knitting scheme with a description. Children's hat in the form of a berry with knitting needles. For such a knitted berry hat for a child, you will need

A summer crocheted hat for a girl in the shape of a blackberry is a great accessory for a cool summer. In this master class with photos and diagrams, it is described in detail how to knit a light openwork hat for a young fashionista.

Required materials for a summer knitted hat in the form of a berry:

  • Children's yarn 100% white acrylic - 10 grams.
  • Children's yarn 100% lilac acrylic - 1 skein (50 grams / 150 m).
  • Children's yarn 100% green acrylic - 25 grams (50 grams / 150 m).
  • Hook 2.5 and 1.5.

A master class on crocheting a summer knitted hat for a girl

1) Before you start knitting a hat, take certain measurements from the child. We need: the circumference of the head and the height of the cap from the crown to the eyebrows. If you do not have the opportunity to find out the sizes, then start knitting according to the general dimensional grid.

2) So, we take a lilac acrylic thread. We collect a chain of 5 air loops.

3) We connect it in a ring. We tie the loops with 10 half-columns without a crochet.

4) Second row: we knit with half-columns without a crochet, without making any additions.

5) So, we have two initial (preparatory) rows ready. Next, we will continue knitting with already voluminous bumps according to scheme 2.

1 report: * in one loop of the previous row we make 8 yarns (extended loops), we knit everything with one loop, 1 air loop *. This pattern is also called "lush columns". In the fifth row from the beginning of knitting, we increase the number of lush columns by 1.5 times.

6) We knit the required number of rows until the desired diameter of the bottom of the cap is obtained.

8) So, we have the base for the hat ready. We process the edges: * 3 single crochet in one loop of the previous row, connecting loop *. We knit from * to *.

9) Leaves. Take the green acrylic yarn. Tie 4 leaves according to scheme 3.

They knit very simply: dial a chain of 13 air loops.

10) Tie the first row with single crochets.

11) Turn the leaf over, adding three loops at the base at the junction. Continue knitting with half-crochets without crochets, leaving three loops at the edge (you do not need to knit them!) Knit exactly the same row on the back side.

12) So, in each row, we knit with half-crochets in a circle of the leaf, without affecting the last three loops on each side. If you knitted according to scheme 3, then you should get such a piece of paper.

13) We need 4 leaves for our hat.

14) Fasten the leaves in the center of the cap.

15) Spread them evenly around the entire circumference. Sew on each piece carefully with cotton thread (for sewing). Please note that the seams should not be visible from the inside of the cap. Therefore, grab only the top rows in each stitch.

16) Flowers: the pattern of knitting blackberry flowers is simple.

  • cast on a chain of 4 air loops;
  • connect it into a ring;
  • tie with 8 single crochet;
  • knit 5 loops in each half-crochet (1 single crochet, 3 double crochets, 1 single crochet, connecting loop).

Each flower should have 5 petals.

17) Then, if you have a yellow bead, then glue it in the center of the flower. If there are no beads, then just take a yellow thread and tie the middle of the flower.

18) Glue the flower.

Dimensions. 56/62 (68/74) 80 \ 86. You will need for a strawberry hat: 50 g of red and green, for a blackberry hat, 50 g of lilac and green Orope Alpaca yarn (100% alpaca 167 m / 50 g) a set of stocking needles Nn 2.5.

Front surface: in circular p. knit persons only. NS.

Jacquard pattern 1 (width 6 p.): Knit according to the counting pattern 1 with threads of two colors, freely stretching the non-working thread along the wrong side. side of the product. Repeat loops of rapport and from 1st to 10th round. R. Jacquard pattern 2 (width 8 a): knit according to the counting pattern of 2 persons. satin stitch with threads of two colors, freely stretching the non-working thread along the inside. side of the product. Repeat the rapport loops. Run 1 time from 1st to 5th p.

Density of knitting. Persons. satin stitch and jacquard patterns: 26 p. and 34 p. = 10 x 10 cm.

Work description

Dial 108 1114) 120 nv with red or purple thread, tie 1 circular p. out. p. and knit in circular p. persons. satin stitch. After 5 (5) 6 cm from the typesetting edge, knit with circular p. jacquard pattern 1. Through 13 (13) 14 cm from the typesetting edge (after the 7th p. counting scheme) tie 1 circle p. red or purple thread, while evenly subtract 4 (2) 0 p. = 104 (112) 120 p.

Next, knit in circular p. jacquard pattern 2. harbored a green thread of faces. satin stitch, while for decreases in the 1st circular p. knit every 7th and 8th stitches together. Repeat these decreases 6 more times in every 2nd p. over the previous ones. In the next 2nd circle. R. evenly subtract 516) 7 p. = 8 p. Tie another 3 cm of faces. satin stitch, then tightly pull off the remaining stitches with a working thread.

Our children are the sweetest in the world. How often we affectionately call them bunnies, beads, fish, kittens, buttons. Quite often, you can hear that parents are affectionately addressing their beloved children - klukovka, my berry. So that the phrases do not remain unfounded, dress up your little princesses in funny hats in the form of juicy and ripe berries. The product is available in two varieties: a chestnut hat and a blackberry hat. We will use the pattern "raspberry".

At the end of the image, the base berry hats fix it on a green leaf. now you really can't tell from a real berry. We recommend tying the hat with a double thread so that our little ones will not chill their ears. After all, a headdress for little mischievous people should be not only beautiful, but also warm. We will also take the thread from soft merino wool, because the skin of the kids is quite delicate. Everyone knows perfectly well that if a child is not comfortable in clothes, he will never wear her, no matter how beautiful she is. Pick up all sorts of colors for hats, as far as your imagination is enough. Children will be incredibly delighted! Most likely, moms in the area will notice these unusual beanies and immediately ask you for a secret scheme!

KIDS HATS.

Head circumference 42-46 cm.

You will need: a blackberry hat - 50 g each of lilac, purple and green yarn (merino wool, 160 m / 50 g), a set of knitting needles No. 4;

Chestnut hat - 50 g each of brown and green yarn (merino wool, 160 m / 50 g), a set of knitting needles No. 4, and a hook No. 3.5.

HAT- "BLACKBERRY"

Blackberry pattern: the number of loops is a multiple of 6. Knit in circular p. according to the scheme. Repeat rapport and from 1st to 14th p.

Attention! The hat is knitted in 2 threads.

Description of work: fold 1 purple and 1 purple thread together, dial 72 sts and knit for a roll of faces. stitch circular p.

After 3 cm from the typesetting edge, knit 28 p. pattern "blackberry", then again faces. satin stitch and for the stalk, tie 1 p. as follows: * 5 p. lilac / purple thread, 1 p. double green thread, repeat from *.

At the same time, distribute the pattern so that the green p. Are between the removed p. Of the last p. pattern "blackberry", while freely stretching the non-working thread along the wear. side of work.

The next p. knit in the same color distribution. In the next p. loops in front of the green stitches also knit with a green thread (alternately 4 purple / purple stitches and 2 green stitches).

In the next p. loops in front of the green stitches also knit with a green thread and at the same time perform decreases.

To do this, knit 6 x evenly (2 purple / purple stitches together). Then knit in the same color distribution and in the 2nd p. each time inside the remaining 3 purple / purple stitches, knit 6 x (2 purple / purple stitches together = 2 purple / purple stitches and 3 green stitches alternately).

In the next 2nd p. knit 2 purple / purple stitches together persons., in the next 2nd p. knit 1 lilac / purple stitches and the next green stitches together.

Knit faces with green thread. satin stitch and 2 x (in each 2nd p. evenly subtract 12 p.), then evenly subtract 6 p. = 6 p. Tie another 2 cm and pull off the loops with a working thread.

HAT- "CHESTNUT"

Front surface: in circular p. all loops knit persons.

Pattern "cones": the number of loops is a multiple of 6. Knit in circular p. according to the scheme. Repeat rapport and from 1st to 10th p.

Knitting density: persons. smooth surface 17 p. and 27 p. = 10 x 10 cm.

Attention! The hat is knitted with a double thread.

Job description: dial 72 sts with double brown thread and knit faces. stitch circular p. After 8 cm from the typesetting edge, knit 20 p. pattern "bumps" with green thread, then knit faces. satin stitch.

In every 2nd p. evenly subtract 8 x 8 p., in the next 2nd p. evenly subtract 2 p. = 6 p.

Tie another 2 cm and pull off the loops with a working thread. Cut the green threads 5 cm long and crochet each thread into each "bump" like a mini-fringe. Cut the fringe to a length of 1 cm.

We knit a hat with ears and trim for a child. The hat is knitted quite simply, so it will work for everyone! We knitted for a girl of 7 months, so the calculation is approximately for this age. Below we give the calculation of loops for a hat for a one-year-old child. Although, one must think that the hat will not be large for 5-6 months, just the strings will be tied tighter. Accordingly, if it's a season, then a child will wear such a hat for months up to 9 with pleasure (at least, the hat is comfortable for my daughter).

For a hat, you will need threads of two colors. We took hot pink acrylic for children (just very soft threads, in a skein 100 g - 300 meters) and a melange thread with different shades of green.

For a boy, respectively, instead of pink, you can use blue, purple, etc. Thick knitting needles are usually recommended for these threads, but we knitted with 2mm needles.

So, for the hat we collect 70 loops plus 2 edging. We knit the first six rows in stockings (if someone does not know, the row is all facial, the row is all purl). This part of the cap will be rolled up. 7 - 36 row we knit according to the scheme:

Odd (7th, 9th, 11th, etc.): 6 facial, 1 purl, 6 facial, 1 purl, etc. to the end of the row.

· Even - according to the picture. Ie: 6 purl, 1 front, 6 purl, 1 front, etc.

We'll have a 6x1 gum. These are kind of wedges.

37th row - 1 purl, knit 2 loops together with the front one, then 2 front loops, 2 loops together with the front one, purl loops - according to the picture.

The 38th row - according to the pattern (where the front ones, there the front ones, where the purl ones - the purl ones).

Row 39 - we continue to close the wedges: purl 1, knit 2 together, knit 2 together, purl, etc.

40th row - according to the picture.

41st row - 1 purl, 2 loops together with the front, 1 yarn, 1 purl, 2 loops together with the front, yarn, etc.

Row 42 - Purl All

Row 43-47 - hosiery.

The main part of the cap is ready. You should end up with something like this:

Knitting, knitting on a hat

We knit ears

The seam will be at the back, so calculate so that there are 35 loops between the ears in front (fold in half, determine the “center” loop and count 17 loops from it in both directions). We collect the loops with knitting needles or crochet (this is more convenient) not along the bottom of the cap, but under the turned-down roller. Here:

hat, hat, hat for a child, hat for a child, hat for a child with his own hands, a hat for a child with his own hands

On each side - 10 loops + 2 edging.

We knit 8 rows of garter stitch (all loops are knit).

9th row - knit 4, knit 2 together, knit 4

10th row - 4 front, 2 loops together front, 3 front;

11th row - 3 front, 2 loops together front, 3 front;

12th row - 3 front, 2 loops together front, 2 front;

13th row - 2 front, 2 loops together with the front, 2 front;

14th row - 2 front, 2 loops together with the front, 1 front;

15th row - 1 front, 2 loops together with the front, 1 front.

16th row - the remaining three loops plus 2 hem knit with a stocking stitch of 10 centimeters (these will be strings). We close.

Sew the cap on the back with the same threads with a knitted stitch.

Now we knit the most pleasant and beautiful. Green leaves. We connected only two, more is possible =)

1st row - remove the 1st, front, purl;

2nd row - remove the 1st, yarn, purl, yarn, purl;

3rd row - remove the 1st, knit 3, purl;

4th row - remove the 1st, front, yarn, purl, yarn, front, purl;

5th row - remove, knit 5, purl;

6th, 8th, 10th, 12th row - according to the picture;

7th, 9, 11, 13th row - like 5th;

14 - remove the 1st, 2 together with the front, purl, 2 together with the front, purl;

15th - remove the 1st, 3 facial, purl;

16th - remove the 1st, purl 3 together, purl;

17th - knit three together.

We knit the second leaf in the same way. We tried to knit the leaves and crochet, but with knitting needles it turns out much more beautiful. Or, for the hook, you need to take thinner threads.

We crochet an air chain 20 centimeters long from green threads. We tie our leaves to it, and thread the chain into a hat into the holes obtained when closing the wedges. We tighten, we tie. At the hanging ends of the chain, we tied twisted "grape mustache": we knitted a row without a crochet: a column, in the next loop - 2 single crochets, then one, then two more, etc. As a result, the mustache curls.

hat, hat, hat for a child, hat for a child, hat for a child with his own hands, a hat for a child with his own hands

We tied such a berry hat to a green suit made of melange thread (we used it for leaves and ears).

For a one-year-old girlfriend, they knitted the same thing, only when a set of loops for a hat was typed not 70, but 77 loops. Those. one more wedge was added.

Ask all questions in the comments, if something suddenly turns out to be incomprehensible =)

Wisenteta

2009 - 2014,. All rights reserved. In the case of full or partial use of site materials, an active link to the source is required.

It gets colder every day, and it's time for caring mothers to knit warm hats for their babies. I propose such a cute model, made in a girly color, but taking threads of other colors, you can easily knit such a hat for a little boy. Add a little - and it will be possible to hem a lining to such a hat, the product turns out to be very warm, and any winter is not terrible for a crumbs in a new thing, tied with warm mother's hands. And if you need an option for the fall, it is enough to make a knitted baby hat-berry from the softest baby threads, and then the lining is no longer needed.

In this article, the child is given 7 months, but the hat for the child stretches well and sits on the head, so it will be worn by the baby with pleasure up to a year! Add to this set the number of loops in multiples of 7 - this way additional wedges will be added, and according to the description below, it will be possible to knit a hat for a child of any age.

For such a knitted berry hat for a child, you will need:

yarn of two colors, the main color and a little green - on leaves and spirals like those of grapes (100 g = 300 m);

knitting needles 2 mm;

a hook of the size suitable for the yarn;

thread for sewing to match the base yarn;

You can take mottled yarn for finishing, with shades of green, then the leaves will look more natural and beautiful.

Knitted baby hat "Berry": job description

We have a calculation for a 7-month-old baby, but you can easily adapt it for your baby by adding or subtracting 7 loops from the initial row - this is the width of the wedge of our hat.

We collect 70 loops + 2 edging.

We knit the first six rows with a stocking knit, this part will be twisted with a roller.

We knit rows 7-36 like this:

* all odd (facial): 6 persons., 1 out., 6 persons., 1 out. and so on until the end of the row.

* all even (purl) - according to the picture.

The end result is a 6x1 gum.

We knit the 37th row as follows: 1 out., 2 together with the front, 2 together., 2 together with the front. Purl loops of this row - according to the figure.

38th - according to the picture, 39th: 1 out., 2 persons. together, 2 persons. together, 1 out. etc. to the end of the row.

40th - according to the figure, 41st: 1 out., 2 together persons., 1 yarn, 1 y., 2 together front, 1 yarn, etc.

42nd - all purl, 43-47 rows - hosiery.

It turned out like this:

We knit ears.

The seam on the knitted baby cap will be at the back, so calculate so that there are 35 loops between the ears in front (fold the cap in half and count 17 loops on each side). On each side we collect 10 loops + 2 edging, but not along the edge, but under the turned-down roller, like this:

We knit the first 8 rows in garter stitch. In the center of the ear, we begin to pick up along the loop from the next row like this:

9th row: 4 persons., 2 persons together., 4 persons.

10th row: 4 persons., 2 persons together., 3 persons.

11th row: 3 persons., 2 persons together., 3 persons. etc.

When there are three loops plus 2 hem, we knit 10 cm in stockings - these will be the strings - and close the last row.

Sew the hat on the back with a knitted stitch, and all that remains is to decorate it.

Decor for a knitted baby hat

We knit leaves from green yarn.

To do this, we collect three loops along with the edging.

1st: 1 shoot, 1 person., 1 out.

2nd: 1 remove, yarn over, out., Yarn over, out.

3rd: 1 shoot, 3 persons., 1 out.

4th: 1 remove, 1 person., Yarn, 1 n., Yarn, 1 person., 1 n.

5th: 1 shoot, 5 persons., 1 out.

6th, 8th, 10th, 12th - according to the picture;

7, 9, 11, 13th - like the 5th.

14th: 1 we shoot, 2 persons together., 1 out., 2 persons together., 1 out.

15th: 1 shoot, 3 persons., 1 out.

16th: 1 we remove, 3 together out., 1 out.

17th: knit three loops together.

We made two such leaves, and you can do more.

Now we collect our hat. From green threads we crochet an air chain 20 cm long. We tie our leaves to it in the middle, and thread the tails through the holes in the upper part of the cap. Tighten and tie on a knot. At the ends of the chain we tie the twisted "grape mustache": on the chain we knit with a single crochet 1 row: 1 tbsp. b / n, in the next loop - 2 tbsp. b / n, then alone again and so on until the end of the row.

Your knitted baby hat is ready!