Weaving baskets from bottles. Weaving baskets from plastic bottles: a master class. A basket of plastic bottles

27.09.2019

Decor items purchased in the store are far from always interesting and unique, in contrast to handmade jewelry. Crafts made on your own will not only cost less, but will also delight those around you with their uniqueness and beauty. In particular, wicker baskets made from scrap materials can serve as containers for every little thing, and as an element of the country landscape, if you place them, for example, on the lawn near the house. If you decide to master weaving baskets from the most ordinary and already unnecessary plastic bottles quickly and easily with your own hands, then this master class for even beginner craftsmen will be useful to you!

Plastic bottles are a versatile material and at the same time very cheap. Therefore, if you have several pieces of empty plastic containers lying around, do not rush to take them to the trash heap. Take some time to get creative - you may be pleasantly surprised by the results.

We weave baskets from plastic bottles with our own hands in a master class for beginners

Before starting work, prepare the following items in advance:

large quantities of plastic bottles;
scissors;
fishing line or strong nylon thread;
a piece of cardboard or thin plastic;
glue for plastic products.

The color of the bottles can be any, but first it is better to do the first work completely monochromatic, and only then experiment with the shades of plastic. Baskets made entirely from green or brown bottles look best. If the final version does not suit you, use regular paints.

The first way to weave a basket is "corners".

This step-by-step guide will guide you through each step of the cart creation process without errors. Better to start by cutting the bottles into their component parts. Cut the bottle plastic into long and narrow strips 1 cm wide. Their number varies depending on the size of the product, but, in any case, you will need a lot of strips, so it's best not to be lazy.

After cutting the bottles, fold each of the resulting blanks in half so that a fold appears in the center. Bend both halves of the strips separately, folding them inward. The ends of the parts should be folded with a center fold.

You will end up with a strip that is 4 times shorter than its original version. On one side there will be a fold, and on the back there will be 2 free edges hidden inside the workpiece.

Now take two parts and connect them by inserting the tips of one into the other and moving both midpoints towards each other. You will receive a "corner". Then insert the third part into it in the same way, then the fourth, and so on to make a zigzag. Continue until the length of the zigzag is equal to the circumference of the basket.

Fasten the ends of the zigzag elements by tying with fishing line or thread. Make another piece for the basket handle.

The number of elements depends on the desired height of the craft. When there are enough of them, you can start assembling.

Tie all rows with fishing line and attach the handle with its help. It is better to do it in 2 or 3 rows wide. If necessary, insert a bottom cut from cardboard or plastic into the basket. If the finished basket will be on the street, it is better to use the second option. Glue the bottom with a glue gun or just glue.

The second weaving method is "chess".

This method may seem more complicated to you than the previous one, but only at first. Materials and tools are required the same as before, plus a cardboard box.

It all starts with cutting the bottles into the longest strips. This is where thin electrical tape comes in handy. Here's how it's done: The middle of the bottle is wrapped with tape at a slight angle. Do not overlap the layers of adhesive tape. Cut the bottles along the lines obtained, and peel off the tape and remove.

Next, you need a box. It will serve as a convenient guide for the size of the product, and, one might say, a machine. Place it upside down and fix the strips of plastic on it close to each other, in one (horizontal or vertical) direction, as shown in the photo. Secure them to the sides of the box using tape. Then take more strips, and pass them one by one between the parts fixed to the box.

This can be done without a box, on any flat surface, for example, on a table.

Weave the sides of the basket in the same way. When ready, gently bend the edges of the plastic and glue them to the inside of the piece.

The handle for the basket can be made from parts - "corners".

These baskets are perfect as a stand for flower pots. If you make a basket without a bottom and fill it with soil, a wonderful flower bed will come out of it. The material from which the crafts are made is very durable and will not lose its beauty for many years.

Plastic is easily washed away from dirt, so it is easy to move the baskets into the house for the winter. Such an unusual decoration will certainly attract the attention of guests, and making plastic baskets will be interesting for the whole family.

The following videos show you other basket weaving patterns that might interest you.

Step-by-step instructions for making a basket

Method one - "corners"

It is better to work in stages (below there will be an explanation for each stage):

cut the bottles first;
then make strips of plastic;
bend the strips into blank corners;
weave the corners;
tie all the rows together;
form the basket in a circle and fasten the edges;
attach a handle;
glue the bottom.

You will find step-by-step instructions for making chamomile from plastic bottles.

Long narrow strips about 1 cm wide are cut from a plastic bottle. You will need a lot of strips, and their number varies depending on the size of the finished product.

Each such blank is folded in half so that a fold is formed in the center. Then both halves are also folded separately from the edge. Do it inward, the ends should eventually come into contact with the fold in the center of the workpiece.

As a result, the detail will be 4 times shorter than the original plastic strip, on one side of which there is a fold, and on the other - 2 free edges (they are also in the fold, since the free ends are "hidden" inside).

From the folded "corners", as a result, such a zigzag should turn out

They take two blanks and push the ends of one into the second and move both midpoints closer to each other. The result is a "corner".

The third part is inserted in the same way into the second, the fourth into the third, and so on. As a result, a zigzag should turn out from such "corners". Do this until the length of this strip is equal to the desired girth of the basket.

The extreme details are simply tied with a fishing line or thread. The "handle" is also made for the future basket in the same way.

Baskets can be woven with various patterns

The number of these "circles" depends on the height of the finished product. Further, weaving baskets from plastic bottles goes into the assembly of the structure.

All rows are tied together with a fishing line, a handle is tied (it is better to make it 2-3 rows wide from the corners) and, if necessary, cut the bottom in the shape of the finished basket.

For the street, it is better to take plastic and glue it with glue or a glue gun. If the basket will stand under a canopy, then you can use thick cardboard.

The most painstaking work in the manufacture of a basket is to fasten the finished rows from the "corners" to each other with a fishing line or thread. The bottom, if desired, can be made from the same blanks. But since no one sees him anyway, there is no need to waste time on this.

Method two - "chess"

Using electrical tape, we cut plastic bottles into the longest strips.

This method can be more difficult than the first, but only in the initial stages. The tools are the same for him, but you also need a box.

First, the longest strips are cut out of a plastic bottle using thin electrical tape. They do it like this: the middle part of the plastic bottle is wrapped slightly at an angle with thin electrical tape so that its layers do not overlap each other.

Then the bottle is cut along these lines, and the tape is removed. It turns out a long strip of plastic.

Then a cardboard box is taken, which will serve as a guide for the size of the future basket, and at the same time almost a machine for its production.

The box is turned upside down and plastic strips are fixed very close to each other in one of the directions (vertically or horizontally). This is done with scotch tape on the side edges. Then, in turn, they take new strips and, in a checkerboard pattern, thread them between those that are fixed.

The same steps can be done without the box, on any flat surface, such as a table.

Wicker baskets are beautiful and useful in the household. Baskets for laundry or groceries, or for various little things, or simply, as an element of decor, you can easily do it yourself. Different materials are suitable for weaving, but the most popular, practical and cheap is a plastic bottle. This material is readily available and easy to work with.

In contact with

classmates

Plastic bottles are usually glossy, which means that the product will always shine and shimmer. Baskets made of plastic bottles are strong, moisture resistant and durable, easy to clean and can easily survive temperature changes. It should be noted that products made from this material are completely safe to use. To weave a basket with your own hands, you will need:

Plastic bottles (the same color or multi-colored) - the middle part of the bottle, without bends.
Scissors, clerical knife or special tool for cutting strips.
Nylon thread or fishing line.
Adhesive for plastic (for decorating the product and fixing parts).

Wickerwork as a decor is made without a bottom. Baskets for household needs are woven with a bottom. The handle for the container is made as required.

Step-by-step instructions for weaving a basket of plastic bottles

Before starting work, be sure to clean the bottles of labels and glue so that the appearance of the future basket does not deteriorate. You can clean the bottle of excess glue just by having hot water and a stiff brush at hand. The bottom and neck of the bottle are not needed, they are cut off.

Weaving method "corners"

Weaving method "checkerboard"

This method is more often used to make large baskets, for example, for laundry or for your pet's sleeping place. For this method, you will need an additional frame and plastic of different colors. A box is suitable for the frame or any other container of the required size.

Plastic baskets are used as flower beds in the country or in your home, or as stands for indoor flowers. In the ways described above, you can make bags, vases, boxes. You can use the remaining bottom and neck to decorate the products from the plastic bottle. Flowers can be made from these elements., petals and more. If you connect the two remaining bottoms together with convex parts outward, you get a rather beautiful and interesting flower. You can attach the jewelry using a thread with a needle or glue.

Decorate the house with items hand-made, it is not only beautiful, but also unique.

Recycling plastic bottles is an easy way to take care of the preservation of nature and create comfortable and beautiful things that can be used in everyday life. Compositions of plastic flowers and animals are now found in many courtyards, but they often do not look very attractive and spoil the flower beds more than they decorate. There are options for a more practical use of plastic containers: fishing line of various diameters is cut from it, which is used in gardening, as well as for construction and minor repairs of furniture.

Options for using plastic baskets

Having made a special cutting tool, craftsmen make thin fishing line or thick strips of material for weaving baskets and other containers. Strong, wear-resistant containers become indispensable helpers for the gardener. They can be used for harvesting, storing tools, containers for not too attractive flower pots, or as decoration for a summer cottage. Weaving a basket from plastic bottles with your own hands helps to preserve the environment and can become an unusual hobby for the whole family. Plastic is easily painted with acrylic, which allows you to create bright patterns on the surface of the container.

made of plastic ropes: advantages and disadvantages

Making items out of unnecessary containers saves money that would have to be spent on storage containers. One of the main virtues of the art of weaving baskets from plastic bottles is the use of creative resources and the development of imagination. Each piece can be made unique by decorating it with various crafts from the same material, such as flowers. The only drawback of this type of hobby is that this activity is very exciting and, having started weaving baskets from plastic bottles, it is difficult to stop. Using various techniques and combining the colors of the stripes, the craftsman is able to make a basket that is indistinguishable in appearance from a container made of vine or wood. The process of creating a product takes only a few hours if the tools are prepared in advance.

Weaving tools and materials

For work, you should prepare:

plastic tape;
scissors;
thin line;
bottom blank;
glue gun for attaching decor.

Finding material for making baskets is usually not difficult: unscrupulous vacationers throw a lot of plastic bottles in the woods, on beaches, in summer cottages. Therefore, you will not have to spend money on buying a ribbon to create a product. You just need to make a special bottle cutter to speed up the process of making plastic yarn.

You can make a tool from a clerical knife and an iron corner, fastening them to each other. Several holes of the required diameter are cut out in the corner above the blade with a hacksaw for metal, and then a handle is attached to the base on which you can hang a bottle. Having cut off the bottom of the container, it is required to separate the beginning of the tape, insert its "tail" into one of the holes and simply pull on the edge. By touching the sharp edge of the knife, the bottle will begin to cut itself, and the diameter of the hole will set the thickness of the yarn.

Weaving a basket of plastic bottles: a master class

If you prepare strips of plastic of different colors, then you can combine them with each other to get different patterns. If desired, if the usual shades of plastic are not attractive, painting the blanks or the finished container with acrylic paints is used.

A step-by-step instruction for weaving baskets from plastic bottles looks like this:

The strips of plastic are cut 1 cm wide. For convenience, templates of the required length are used.
Each workpiece is folded in half, both halves are tucked inward along the edge so that they come into contact with the central fold. You need to make many of these blanks, depending on the size of the basket.
Then the two parts are put on top of each other to form a "corner". This method is called "snake".
The corners are put on each other until you get a strip equal to the girth of the basket. Zigzag blanks are fastened together with a fishing line, forming the walls of the product. A pen is made in the same way. As a bottom, you can use thick cardboard or other material.

This is just one option for weaving baskets from plastic bottles. There is also "checkerboard weaving", which requires a strong frame. In this case, strips of tape are sequentially passed through adjacent strips in a checkerboard pattern. You can try different ways of weaving baskets from plastic bottles and choose the one that suits you best.