Beauty and health of teeth 

Chenille: creating a new fabric! Chenille technique: application ideas. Patchwork. Schemes, photo, description

Some needlework magazines call it "senile", referring to the previously common thick pile fabric "chenille". Others stubbornly write "chenille" without any explanation.

The chenille technique is an imitation of a small patchwork set of strips of fabric. Front side of the finished chenille has the appearance of multi-colored stripes neatly sewn onto any base. However, the effect is achieved not by direct patchwork, when a larger one is created from small parts, but by another, original reverse technique: initially taken large pieces of fabric, as a result of special working methods, turn into even strips and are perceived as a pile fabric.

With the technique of chenille, you can repair clothes, especially cool - wiped places on jeans and other dense fabrics.

If the chenille is very shaggy with a hard plastic brush, then the effect of velveteen is obtained in a very large scar, soft and fluffy. After each wash, however, it is necessary to "shag" anew.

Chenille harvesting has three main components:

  • bottom layer (base),
  • the average component is several layers of fabrics - fillers to give a volumetric effect and warm the model,
  • top paint layer.

Details about each component.

Depending on the purpose of the product, the bottom layer (base) can be made of dense or, conversely, thinner and softer cotton or woolen fabric.

The choice of layers - fillers is especially important, since their task is not only to "help" the upper paint layer to express itself in terms of color, but also to raise it, as it were, to push it out during the subsequent wet processing of the workpiece.

The number of layers - fillers can be different, usually it is 2 - 6 layers of thin cotton fabric (chintz, coarse calico, etc.) of suitable color. It is possible to take denser fabrics as filler layers, for example, flannel, wool, knitwear is less often used.

It should be borne in mind that denser fabrics, due to the low mobility of the threads during subsequent wet processing, do not fray as actively as fabrics with a movable weave of threads.

The color of the filler layers depends on the top paint layer, usually they are plain fabrics dyed on both sides. Moreover, for one workpiece, all filler layers can be either of the same tone (color) or different shades of the same color tone. When the layers of fabric are arranged sequentially from the lightest to the most saturated after wet processing (washing), a deep volumetric effect is obtained.

The top colorful layer of the fabric dictates the choice of all other inner layers. As the top layer, you can use a variety of fabrics in color and texture. So for simple models, bright colorful chintz, flannel with a heel, thin woolen fabric (such as plaid) and others are well suited.

Without experience in the chenille technique, it is difficult to immediately get the desired result. First, it is better to reproduce your idea in several samples, experimenting with the number of filler layers, their color, and most importantly, with the top layer of fabric.

A stunning effect is obtained if Pavlovo Posad shawls are used as the top layer. Deeply dyed fibers of Pavlovo-Posad cashmere (this is fine wool), interacting with matching filler layers and the base, give the workpiece a velvety effect. Clothes sewn from this bear the features of a truly Russian style.

Chenille technology

When all three components of the workpiece are selected ..

  • Assemble the workpiece chenille on the table in a particular order. First, lay the base layer face up on the table surface. Then carefully lay out the fillers layer by layer on top of the base. Place the last paint layer on top chenille laying it face up.
  • The following conditions must be observed:
    • equity threads on all layers should be located in the same direction, or if there is a lack of cut, be perpendicular to each other;
    • the bottommost layer of chenille (that is, the base) should be approximately 2-3 cm larger on all sides than the rest of the layers. This is necessary for the convenience of subsequent cutting of chenille layers.
  • Fasten with pins around the perimeter of the workpiece.
  • Sew at a distance of 1-2 cm along the oblique, so that the threads do not climb later.
  • We cut through the layers, except for the bottom.

You can lay lines at an angle of not 45 degrees, but 30, but not along the lobar or transverse thread. The following lines are laid parallel to the first line at the same distance from each other. The distance may vary depending on the quality of the fabric and the desire to obtain a particular effect of the fabric, but on average it is 1, 1.5 or 2 cm.

Chenille is different. You can also sew on separate strips of an oblique inlay, the effect is the same.

When all the strips are cut, the fun begins. It is necessary to fluff the chenille.
This is done with a clothes brush. Rub in different directions, you can wet it a little to remove impregnations from the fabric.

To fluff the fabric well, you can use a washing machine to the brush, for this, the blanks must be wrung out in a centrifuge at the highest speed.

Chenille technique - books

I found an interesting book on sale - on the chenille technique!

"Patchwork from chenille. Chenille from Pavlovo Posad shawls"

The book is dedicated. The difference and innovation compared to other publications on this topic is a detailed description of the author's method of working with a cashmere pavlovoposadsky scarf.

The book will introduce readers to the new possibilities of this unique technique and help in creating beautiful things for your interior and wardrobe.

Knife for technique "Chinel" with 4 guides

Diameter: 60 mm.

Shop here -

One of a kind knife with 4 guides of different widths. Practical bag for transport and storage included. The special blade for the Prym Chenille knife has 24 sharp edges.

CAUTION: The round blade is very sharp. When working with him, be extremely careful!

Under this knife, a protective mat is also needed, it is also on sale - 30x45 cm, or rotating.

In every house, there are probably a lot of rags, and even finished products, which are a pity to throw away, and there is nothing to do with them. However, now this problem can be solved using various types of patchwork, to which the "chenille" technique belongs. It allows you to get a new fluffy material from several layers of fabric for the manufacture of all kinds of products.

What materials are needed to make a chenille fabric?

The canvas, for the manufacture of which the "chenille" technique was used, consists of the upper front layer, middle layers (from 3 to 5), the lower layer - the base. Most often, a fabric is used as the top layer, contrasting with the inner layers with a large bright pattern. But it all depends on the preferences of the needlewoman.

Whatever you decide to sew using the "chenille" technique, first you need to make a canvas. To do this, you need 5-6 pieces of fabric, which can be different in color and texture, the right size, depending on what will be made from it next. Ideally, when the directions coincide in all layers, but their perpendicular arrangement is also possible.

In addition, the chenille sewing technique requires a metal ruler, a sharpened pencil, a needlework mat with centimeter markings, a non-woven base, sewing pins, sharp scissors and a sewing machine.

Preparatory stage

To obtain a "chenille" canvas, it is necessary to place it at an angle of 45 degrees to the marking lines of the rug and, using a sharp pencil, draw lines every centimeter. The stitch lines should be at a 45-degree angle to the cross and longitudinal threads. Since the fabric cut at such an angle will fringe beautifully, and not just crumble.

So, the lines are marked, what next does the "chenille" technique require from the needlewoman? A master class on the manufacture of this material will be needed only for the first time, and then - in a similar way. Each needlewoman will be able to create canvases with a variety of patterns. To continue work, it is necessary to pin all layers of fabric together with pins, and pin the base with lines on the wrong side. All layers are chipped off with pins so that they do not move apart and at the same time do not interfere with sewing.

Fabrication "chenille"

The stitches should be sewn from the center to the edges, regardless of the selected pattern - square, diamond, spiral, diagonal, straight lines or floral patterns. When all the lines are stitched, the pins should be removed, the non-woven backing removed, and all layers of fabric, with the exception of the bottom layer, cut between the lines of the lines. Further, the "chenille" technique involves wetting the fabric with water and making movements with it that imitate hand washing. In the course of this work, a fringe will appear. Rubbing should be until it becomes uniform over the entire area. To get the best effect, the product can be ruffled with a clothes brush with hard bristles.

Next, the fabric must be dried on a flat surface and can be used for further purposes. Fortunately, the "chenille" technique allows you to bring the most diverse ideas to life. The fabric obtained as a result of all the above operations will be very fluffy and soft to the touch. That is why it is often used to make sofa cushions, soft toys, rugs and napkins.

Description of the manufacture of toys in the technique of "chenille"

Soft toys are present in almost every home and surround children from a very young age, but sometimes adults are also crazy about them, especially if they are distinguished by beauty and originality. Moreover, some soft toys can act as pillows in a nursery or living room. And if these products are also "home-made", then it will be simply impossible to stop admiring them. It is to such things that toys in the "chenille" technique belong.

Having mastered this type of patchwork on simpler products, any needlewoman can start making a soft toy. Most often, bears, cats, bunnies and many other animals are sewn using the "chenille" technique. It is worth noting that they are very original, because they look and feel like animal hair. To start making a toy using the "chenille" technique follows from cutting out the details - the head, body, arms, legs, ears. At the same time, each part, both back and front, must be cut out from 4-6 types of fabric, which will subsequently be sewn together, and then cut and tousled in the manner described above, forming a "chenille" canvas. Next, the back and front parts must be sewn together, filled with padding polyester and assembled together, having received a finished toy.

Pillow in "chenille" technique - photo embroidery

They are a great way to decorate the interior of any home. And if they are also made using such an unusual technique as "chenille", then the effect will be simply stunning. So, to make a pillow using the chenille technique, you will need 4 pieces of fabric, 35x35 cm in size. Ideally, all 4 pieces should be of different colors, then the finished product will be more original. To make the back side of the pillow, you will need two rectangles, which together would be slightly larger in area than the flap of the front wall of the product.

A zipper will be sewn between these rectangles, through which it will be possible to fill the pillow. In addition, you will need pins, sharp scissors, a hard clothes brush and, of course, a sewing machine.

First you need to evenly put together all 4 squares of fabric and decide on the pattern. It can be a diagonal, straight lines, a spiral, a rhombus, a square and many others. Depending on the pattern, it is necessary to chip off the fabric with a pin and stitch along this contour. Next, with 4 prepared flaps, you will need to do all the operations that the "chenille" technique provides for: sew the front and back walls and fill the pillow with padding polyester or any other suitable material through a zipper sewn in advance.

Scheme for sewing a rug using the "chenille" technique

The rug is another of the many products that the chenille technique is excellent for making. A master class describing each step of this work is not required, but a few words about the manufacture of this product are still worth saying. So, since the result should be a dense rug that can be laid in the bedroom near the bed or in the bathroom, it is important to use as many layers as possible for its manufacture, preferably the most dense fabrics - the thickness of the rug should be limited only by the capabilities of your sewing machine. cars.

The very first layer that will not be cut should be as dense as possible, and then you can use fabrics of any color and texture, depending on how you planned the appearance of the rug. All layers are sewn together according to the scheme already described above, and then cut with sharp scissors to the base and fringed. You can add originality to the rug by sewing a rose or some animal on the upper ball, the details of which must be cut out of contrasting fabric.

Chenille bag in denim

In every modern home, there are bound to be a few pairs of unwanted denim pants that have already frayed in a certain place, but, nevertheless, the rest of the fabric is still quite usable. So why not sew an original bag out of it using patchwork. Schemes for making a bag using the "chenille" technique are absolutely not needed, only your imagination is needed, especially at the stage of decorating the product.

So, you should take jeans and cut out squares or rectangles of the sizes that you would like to get a bag from. On each side of the product you will need 3-4 flaps of fabric. It is worth noting that all the features of making the "chenille" fabric described above apply to the same extent when both parts of the bag are ready, you will need to sew them together, insert a zipper, sew on handles and decorate at your discretion. For this purpose, you can even use embroideries and appliqués, which are often present on the pockets of the same denim pants.

Tacks in the technique of "chenille"

A potholder is another thing needed in the house, or rather in the kitchen. The more there are, the better, because the kitchen has a lot of hot pots, cups, pans and other utensils that constantly need to be moved and placed somewhere, avoiding damage to furniture, tablecloths and oilcloths.

The good news is that the manufacture of potholders does not require a lot of fabric, and it does not have to be some kind of special one, any version of it will do, which is no longer suitable for making many other things. It is also worth noting that you do not need too many layers to sew a potholder - 3 will be enough, otherwise it will be inconvenient to use. For a more aesthetic appearance, the first layer - the basis of the tack, should be turned inside out to the subsequent layers, and upon completion of the fabrication using the "chenille" technique, trim the product, and sheathe the edges with a contrasting fabric or braid, remembering to sew on a hanging loop.

Patchwork: building compositions

The chenille technique is far from the only type of patchwork. There are many other types of it that deserve no less attention. Thanks to various combinations of shapes, colors and textures of fabric patches, you can get a real work of art as a result. Starting work with pieces of fabric follows from determining the size and geometric shape of the future product. The simplest is a drawing consisting of separate motifs, the edges of which are limited by a border. The main thing is to maintain a balance between the intended pattern and the background.

When building any composition, special attention should be paid to the center. The center of ornaments made according to a certain scheme must be highlighted with a patch of a contrasting color or with a large pattern. Free application allows the selection of the center in both size and color. In order to get beautiful patchwork, dark and larger figures should be at the bottom of the composition, and small and light at the top.

chess patterns

Products for the manufacture of which chess patchwork was used look very original. Schemes in this case can be used very different.

So, for example, the simplest is alternately sewing squares from two types of fabric into stripes, and then strips into a canvas, turning every second strip upside down to form a checkerboard pattern.

You can also get a checkerboard pattern by using a diagonal pattern. However, in this case it is better to use fabrics of 4 different colors. First you need to sew together several strips of different colors, then cut them into strips across, and those, in turn, place them diagonally, shifting one square, and sew them together.

As you can see, there are a huge number of ways to use seemingly unnecessary shreds of fabric, so do not rush to throw out worn or no longer fashionable things, because you can breathe new life into them.

Technique "SINEL"

Chenille is a new fluffy type of fabric obtained by sewing together several layers of fabric in parallel stitches.
on a sewing machine and then cutting the top layers between the stitches.

This technique is good to use in sewing jackets, cardigans, vests, bags, pillows, bedspreads and other things. Not at all necessary
chenille the entire product, you can limit yourself to finishing the collar, cuffs, yoke and other things.

For this technique, it is better to use light thin natural fabrics such as silk, viscose and cotton. as bottom
the base layer can be used synthetic fabric.

The choice of fabric color depends on your preferences, as well as on the planned end result. Type of finished fabric
will depend on the sequence of imposing different colors of fabric on top of each other.

The number of layers can be 3, and 4, and 5, and 6, and even 7 layers. But you need to know that the more layers are sewn together, the resulting fabric
becomes harder and rougher.
In the nature of sewing supplies, there are special roller knives, backing rulers and chenille brushes, but if
such accessories are not available, you can freely do without all this.
So, to get chenille you need: a few squares of a suitable decated (decathed-wet-heat treatment) fabric, sewing thread, pins and small scissors.
We put the fabrics on top of each other right side up, chop off and lay a diagonal line in the middle.

It is better to set the stitch on the sewing machine with a minimum stitch length, it is even better to sew with a triple reinforcing stitch
(if it is in your machine).

It is possible to lay lines at an angle not of 45 degrees, but of 30, but in no way along a shared or transverse thread. Next lines
laid parallel to the first line at the same distance from each other.
It is better to do this not in one direction, but in opposite directions. (Top down, bottom up)
The distance may vary depending on the quality of the fabric and the desire to obtain a particular effect of the fabric, but on average it is 1, 1.5 or 2 cm.


When the entire fabric is stitched, you need to carefully cut the top layers of fabrics with scissors in the middle between the lines.

The edges of the cut strips need to be ruffled with a stiff brush, you can use a toothbrush for this.
If the fabric is well washed, then you can not do this, but immediately throw it into the washing machine and wash it in warm or cold
water by selecting a short wash cycle. Then the fabric must be dried.

And the chenille is ready!

This is the simplest version of chenille. To complicate and embellish the fabric, you can lay the lines figuredly, but do not forget
that the fabric should be cut obliquely, strictly at an angle of 45 degrees.

If the stitch pattern is complex, then it can be applied to the fabric with chalk, or soap, or a disappearing felt-tip pen, or use
lined tracing paper.

Tracing paper is applied and pinned to the top layer of the fabric, the line is laid directly on the paper.
When the lines are ready, the tracing paper can be removed.

it’s not difficult to figure it out ...... a small lesson in pictures


and a few more masterpieces...

Bedspread and pillows. "SINEL" technique

CHENILLE, Faux Chenille, CENILLE, CHENILLE... Application ideas

I won’t talk much, and let, among the many, you find for yourself a suitable idea for implementation.

Such a fabric looks unusual and beautiful in tailoring. An absolutely stunning effect is obtained if Pavlovo Posad shawls are used as the top layer.



Chenille bags, cosmetic bags look amazingly beautiful. This is where you can put all your imagination into practice! And the fabric does not need much and the size of the product is also not large, which is not unimportant when mastering this technology.









What is chenille?


Chenille is a new type of fluffy fabric, obtained by sewing together several layers of fabric in parallel stitches on a sewing machine and then cutting the top layers between the stitches. At the same time, initially taken large pieces of fabric, as a result of special methods of work, turn into even strips and are perceived as a pile, voluminous fabric with a velveteen effect in a very large scar, soft and fluffy.
This technique is good to use in sewing jackets, cardigans, vests, bags, pillows, bedspreads...
With the chenille technique, you can decorate ready-made clothes (trimming the collar, cuffs, yoke), you can repair frayed places on jeans and other dense fabrics.

The chenille blank is similar to a layer cake and has three main parts (layers):
bottom layer (base),
average component- these are several layers of fabrics - fillers to give a volumetric effect and warm the model,
top paint layer.

Depending on the purpose of the product, bottom layer (base) can be from almost any fabric: from dense or, conversely, thinner and softer cotton or woolen fabric.

The choice of layers - fillers is especially important, since their task is not only to “help” the upper paint layer to express itself in terms of color, but also to lift it, as it were, to push it out during the subsequent wet processing of the workpiece.

Number of layers - fillers may be different, usually it is 2 - 7 layers of thin cotton fabric (chintz, calico, etc.) of suitable color. It is possible to take denser fabrics as filler layers, for example, flannel, wool.
It should be borne in mind that the more layers are sewn together, the resulting fabric becomes heavier and rougher.
Attention! All fabrics must be washed and dried before sewing.
It should be borne in mind that denser fabrics, due to the low mobility of the threads during subsequent wet processing, are not as actively fried as fabrics with a movable weave of threads.
Fabrics are used, both plain and patterned. Fabrics with a large or abstract pattern look very advantageous.
The choice of fabric color depends on your preferences, as well as on the planned end result. The appearance of the finished fabric will depend on the order in which the different colors of the fabric are placed on top of each other.
The color of the filler layers depends on the top paint layer, usually they are plain fabrics dyed on both sides. Moreover, for one workpiece, all filler layers can be either of the same tone (color) or different shades of the same color tone. When the layers of fabric are arranged sequentially from the lightest to the most saturated after wet processing (washing), a deep volumetric effect is obtained.

Top paint layer fabric dictates the choice of all other inner layers. As the top layer, you can use a variety of fabrics in color and texture. So for simple models, bright colorful chintz, flannel with a heel, thin woolen fabric (such as plaid) and others are well suited. Without experience in the chenille technique, it is difficult to immediately get the desired result. First, it is better to reproduce your idea in several samples, experimenting with the number of filler layers, their color, and most importantly, with the top layer of fabric.

See how different the same fabrics look in different layers:


Here are more examples:

Chenille technology

So, to get chenille, you need: several squares (rectangles or other identical curly cuts) of suitable decated fabric, sewing threads, a square ruler, pins and small sharp scissors (roller knife).
When all three components of the blank are thought out and selected, it is necessary to assemble the chenille blank on the table in a certain order.
First, lay the base layer face up on the table surface. Then carefully lay out the fillers layer by layer on top of the base. On top, place the last colorful layer of chenille, laying it face up.
The following conditions must be observed:
equity threads on all layers should be located in the same direction, or, with a lack of tissue, be perpendicular to each other;
The bottommost layer of chenille (that is, the base) should be about 2-3 cm larger on all sides than the rest of the layers. This is necessary for the convenience of subsequent cutting of chenille layers.
Next, you need to pin the fabric around the perimeter of the workpiece with pins (you can even sweep with large hand stitches)

It is better to set the line on the sewing machine with a minimum stitch length, it is even better to sew with a triple reinforcing line (if your machine has one).

Chenille is a decoration technique, thanks to which you can create a unique material with your own hands! Using several layers of fabric of different colors allows you to achieve unexpected effects and give the material an interesting textured surface.

Our master class will tell you in detail how to sew chenille fabric with your own hands!

Chenille: fabric selection and preparation for work

How to sew chenille with your own hands? The fabric in the "chenille" technique is multi-colored patches folded in several layers, which are then quilted at an angle of 45 degrees, cut and shaggy edges. It turns out a fluffy terry surface, the color of which depends on the selected fabrics. Choose fabrics for work from which it is not difficult to pull the thread - then it will be good to “muffle”. Natural fabrics are best; cotton, linen and viscose. Interesting work can also be done from denim, you can use a combination of several fabrics of different textures.

The fabric used as a base can be denser, this will make it easier to work. You will need at least three pieces of fabric in different colors. The number of layers can reach 5-7, depending on the thickness of the fabric.

Before starting work, all flaps must be washed and ironed. Then pinpoint the lobar thread of each fabric and align its edges. The cuts should be directed at an angle to the lobar thread, so if the direction of the cuts on the fabric is diagonal, the fabrics should be aligned with the lobar thread.

If you want the terry stripes to be straight, the flaps (or curly detail) should be cut on the bias.

There are special tools for working in the chenille technique: cutters and special brushes. However, if you only want to try this kind of decoration, there is no need to spend money on expensive tools. Sharp small scissors and a toothbrush (or a brush for combing out the hair of dogs and cats) will suffice.

So, let's find out how to sew fabric using the chenille technique with your own hands!

Progress

Align all fabric cuts along the shared thread. Unless otherwise provided by the model, it is more convenient to leave the bottom layer of fabric a little larger.

Mark the diagonal stitching lines, at an angle of 45 degrees to the shared thread (edge). The distance between the lines can be up to 2 cm. If the distance in your model can be maintained by changing the position of the sewing machine needle, you can only draw the first diagonal. It should be in the center of the motive.

Sew all layers of fabric along the marked lines. Sew along the center line first, then along the right half, then along the left.

Fluff the edges of fabrics with a brush. You can also put the work in the washing machine and scroll at the maximum spin speed.

For any needlewoman who constantly replenishes her stock of knowledge and creativity with something new and unusual, the amazing chenille technique should be another breath of novelty and inspiration. Products that are decorated using such a non-standard method are very interesting, with a slight touch of history and nationality.

Interestingly, to get such amazing gizmos made using the chenille technique, you just need to understand its simple execution, and even the most inexperienced beginners can handle it.

What is the chenille technique and what is it eaten with? The result of this execution is a fabric surface with an imitation of a small terry set of shreds from individual fabric strips. The front side of such a product will resemble neatly sewn strips of fabric on a multi-colored volumetric basis.

The name itself, according to many needlework magazines and publications, arose from the rather popular and previously widespread pile and thick chenille fabric, which was used for sewing outerwear.

The unusual effect of this technique is achieved not through sewn patches, as it might seem at first glance, but in a more original way: from large pieces of fabric, as a result of special sewing techniques, even strips are obtained, which are perceived as a voluminous pile fabric.

Chenille technology is somewhat akin to patchwork, only there, on the contrary, a single motley canvas is created from individual small particles. The very essence is quite simple: by sewing together several separate layers of fabric in parallel lines, a new interesting kind of fluffy fabric is obtained.

To create such beauty, both plain and multi-colored fabrics are used, most often with abstract and large patterns, which add a special zest to the result. The final product, in many respects, will depend on what colors you choose your "layers" in and how they will be combined with each other.

It is important to remember that the appearance of the finished product will depend not only on the color of the fabric, but on the order in which the “layers” are applied: the same fabrics in different sequences look completely different.

Technical Highlights

A preliminary preparation for creating a product using this technique should have three main ingredients:

  • Bottom layer or base. Its texture will depend on the purpose of the future product, it can vary from dense fabric to softer, for example, cotton.
  • The filling is the average component. It can consist of several layers of fabric, usually from 2 to 6, the number can increase even up to 10, but, however, it is worth remembering that the more overlays, the thicker and denser the final product will be. Most often, thin cotton fabrics with high thread mobility are used so that they are conveniently "furred" during pre-treatment. Typically, flannel or wool is used for filler layers, less often knitwear or other dense fabrics.
  • The top ink layer, which is fundamental to all the inner layers, is usually chosen bright and colorful to get the same result.

A few secrets

  • If you don't know how to choose colors for the inner layers, then be sure to start from the front fabric. All colors of the inner flaps of the fabric can be either one tone or all different, depending on the desired result. If all the layers are folded in order from the lightest tone to the brightest, then as a result you can get an unusual 3D effect. Usually, fabrics dyed on both sides are used for the inner layers, so the product will acquire a deeper and more saturated shade.
  • In order not to be disappointed with the result, it is better to practice on samples first, where you will fully embody your idea, see how it looks in real life, and you can transfer it to a real product.
  • In order for the lines to turn out, more or less even, they usually first make one center line, from which all the other lines are laid parallel to it at the same distance.
  • When all the fabric is delayed, you will have to carefully work with scissors: it is cut in the middle between the lines, only the lowest layer, the base, remains intact. To get a terry effect, the finished shreds are processed with a stiff wedge, which will easily fray their edges.
  • The use of chenille is very different, it is used to decorate clothes and home decor items, such as pillows or napkins. This technique looks especially good on outerwear, for example, on cardigans, coats, jackets and vests. It is absolutely not necessary to process the entire product with its help; it is enough to limit yourself to finishing the cuffs, collar or other parts.

Learn new techniques and get creative.