Beauty and Health Teeth 

Knitting mohair pullover wives scheme. Mohero sweaters for ladies: Schemes and descriptions. Knitted models made of mohair knitting - diagrams and description

Mobility sweater is the warmest of all products that are considered natural. They are in two versions: knitted from the mohair of the usual density or from the thin super Kid mohair. The sweatshirts from super kid mohair, especially if it contains a silk, look like a slightly elegant canvas, like a web. The usual mohair in the product will be volumetric and very warm. Therefore, it is very important to choose the right yarn for the model. Mochor's sweatshirts with a description presented in this article are simply. For mohair things, no intricate patterns are required. The beauty of the finished product is guaranteed by the uniqueness of the yarn.

Coffot with a collar "Boat"

Size: 38.

We need:

  • yarn, 100% Merinos wool, (50g on 175m), raspberry color - 300g;
  • yarn, consisting of: 80% mohair, 20% synthetics, (25g at 245m), raspberry flaker - 150g;
  • a little contrast yarn;
  • spokes direct No4 and No4.5.
  • iC. smooth: in persons. R. L. p., V. R. - and.;
  • rubber: 1l.x1a;
  • figure "Openwork diagonal": We perform on 25p. by cx;

* Double gum: Apply 1/2 auxiliary yarn from the desired loop number. Next, knit working thread:

1p: * 1l., 1n. * - from * and up * We repeat to the whole r.;

2p.: * Nakida check 1l., 1p. Remove the invalid (thread in front of the web) * - from * and before * We repeat to the whole r.;

3p. And all subsequent: * 1l., 1p. Remove the invalid (thread in front of the web) * - from * and up * We repeat on the whole r.

In the finished product, the contrasting thread is dissolved.

Density: thread in two additions (wool + mohair) on persons. Stroy 18p. on 25 p. equal to 10 cm per 10 cm.

Description

All items will perform double thread: wool yarn + mohair.

Back

Knitting sweaters from mohair are starting with NO4 101P spokes. Slip 4p. dv. cut-ki, then - 16r. Conventional cut. In the height we get a cloth 6cm. Go to knitting needles No4.5. We start knitting people. Sling and in the 1st r. Evenly we reduce the 16P. Next, you need to link to 37 cm of the total height of the product. For registration of the Proucy at the edges of the details, we must close 1 time 3P., Further in even r. Three times symmetrically we reduce 1p. Removal do not on the extreme p., And retreating 3P. From the edge of the work: i.e. after the 3rd first, and in front of 3rd extremes. Having obtained 55cm backrest lengths, close the remaining 73P. (including on 14p. \u003d one shoulder).

Before

We recruit NO4 101P. and schoo 4p. dv. cut. Go to the joint venture. NO4.5 and perform: 25p. Conventional cut, 25p. by CX. "Openwork diagonal", 1P. Persons. stag, 25p. by CX. "Openwork diagonal", 25p. ordinary rubber band. By sticking to the level of 6cm, we perform a jig in the algorithm: on the sides, at the edges, 25p. - Persons. The smooth, the rest of the p. - Apparently drawing. Be careful in the first of the face. Stroy we reduce 8p. On each side, so on. In these areas remains 17P. Ubaets try to distribute around the river. evenly. For the decoration of the rally on 33cm, we close the central 7P. Next, each part will be completed separately. At each of them, in even rows for a drop in 19 times we reflect 1P. Registration Proucy We carry out, using the description for the back. 55cm from the bottom of the work closed the remaining 14P. For each shoulder.

Sleeve

NO3 spokes score 51p. and spread 4p. Double. cut Go to the joint venture. NO4.5 and encourage: 13p. - Normal cut, 25p. - OSN. Pattern, 13P. - Normal cut. After 6cm, extreme 13p. On both sides, we begin to lies to those. smooth. In the 1st row of transition to persons. The smootment is evenly reduced on each side of 3P. All in the work remains 45. Next, to expand the sleeves on both sides in every 10th r. I add 1P. 10 times. 50cm from the beginning we proceed to the formation of the fanish sleeves. On each side, we close 1 time 3p., Then in each even p. 10 times 1p. After 10 cm, the remaining 39p remains from the beginning of the open.

Assembly

Stead the seam on one shoulder. NO4 knitting double thread raise on a dropout of 177p. And we have ordinary cut-ku on 16cm in height. Then perform 2 rows of DV. Cructures and close the knitted seam. Step the second seams and seams on the collar. We sew the hives, stepping the sleeves and side seams.

Stylish mooring pullover with gradient: video MK

Mochur sweater with openwork border

Dimensions: S; M; L; XL.
Width of the top 100; 108; 116; 124cm.
Length 60; 61; 62; 64cm.

We will need:

  • mohair Luxe mohair yarn, as part of 77% mohair, 23% silk, (25g on 175m), white - 125; 125; 150; 175g;
  • straight knitting needles NO4, NO4,5 and NO5;
  • circular spokes NO4 and NO4,5;
  • markers loops.
  • pattern of 1 - persons. Smooth: on the front side, all p. - Persons., Byna. side - izn. P.;
  • pattern 2 - openwork: performed according to the scheme. Izn. R. Knit in the drawing, the Nakida is tied out. p. Performs 1 time from 1p. on 22r;
  • pattern 3: 1l., 1st.

Density: persons. Stroces NO5 18p Spokes. by 24r. equal to 10 cm per 10 cm.

Description

Before and back

These parts are performed by one detail to the arm.

We recruit NO4,5 187; 203; 219; 235P. Knit 1p. izn. On Iz. Side knitting NO4. Then you need to tie another 6p. NO4.5 spokes pattern 1, placing a label after 47; 51; 55; 59P. and after 140; 152; 164; 176P. These will be the "side lines". Tie further 1kr., Pattern 2, 1kr. After 22r. We continue the spokes of NO5 pattern 1.

Round

At an altitude of 19cm, from the beginning we make to the marker 1 stretch (removing 1p., 1l., Take it through the removed), 1l., And after the marker: 1l., 2p. in 1l. We get 183; 199; 215; 231p. We continue right.

Neck

At a height of 34cm from the beginning we reflect on each side 12 times 1P. In every 4th r. Plus 6 times 1P. in every 2nd r.; 13 times 1P. In every 4th r. Plus 6 times 1P. in every 2nd p; .14 \u200b\u200btimes 1p. In every 4th r. Plus 6 times 1P. In every 2nd r.; 13 times 1p. In every 4th r. Plus 8 times 1P. in every 2nd r. At the same time, at an altitude of 38cm, we started separating the lines of cloth markers into three parts. Next, the back and shelves will knit separately.

Back

Performed on 89; 97; 105; 113P.

Armhole

Symmetrically, on the sides, through r. Close twice; twice; three times; three times 2p. and we reduce 6; eight; eight; 10 times 1p. As a result, we have 69; 73; 77; 81p. Having received 20; 21; 22; 24cm from the transmaneous cutout closure all p. The first 17; eighteen; nineteen; 20p. and last 17; eighteen; nineteen; 20p. - loops for shoulders, central 35; 37; 39; 41p. - Loops of the neck.

Right Front Detail

We continue to knit the neck. At the same time, knit a loose profile on the left, as on the previous element. Reaching 60; 61; 62; 64cm from the start, close the remaining 17; eighteen; nineteen; 20p.

Left Front Detail

Knit symmetrically.

Sleeve

We recruit NO4.5 43; 43; 51; 51p. Knit 1 p. Pour on Iz. Side knitting NO4. Then the needles of No4.5 people. Smooth knit 6 r. Tie further 1kr., Pattern 2, 1kr. After 22r. We continue the knitting NO5 pattern 1. Simultaneously at an altitude of 8cm from the beginning we add on each side 1 time 1P. We get 45; 45; 53; 53P. We repeat these adds 7 times in each 8p; 9 times alternately in every 8 row plus 10 r.; 6 times in every 10p; 8 times every 8r. Total we have 59; 63; 65; 69P.

Okat

At an altitude of 38cm from the beginning, close on each side in each 2nd r. 2 times; 2 times; 3 times; 3 times 2P., We reduce 15 times 1P., Close 1 time 2p. And 1 time 3p. At a height of 15; fifteen; sixteen; 15 cm From the start of the rounding, we close the remaining n.

Finishing and assembly

Start shoulder seams.

Vent.

Circular spokes NO4,5 score 289; 295; 301; 311p. On the edge and back (by 68p. to the bottom of the neck and vice versa, 58; 00; 62; 66P. In the neck, 37; 39; 41; 43p. On the back). Knit 3p. Patter 3, we continue with the spokes of NO4 with a pattern 1. After 6p. Patterns 1 Close P. We sew the sleeves.

A gentle jumper from Mochhar: Video Master - Class

Stylish jacket

Size: S.
Width of the top - 90cm.
Length - 58cm.

We need:

  • mohair luxe mohair yarn, as part of 77% mohair, 23% silk, (25g at 175m), smoky color - 100g;
  • the same color of the CloWN yarn, aged 38% of cotton, 30% polyester, 26% viscose, 6% polyamide (50g to 75m) - 200g;
  • straight knitting needles NO6 and NO8;
  • circular spokes NO8;
  • markers.
  • nO1 pattern: Jacquard is performed by NO8 knitting with two threads - Mohair Luxe and Clown according to the scheme:
  • nO2 pattern: rice, performed by NO8 knitting with two threads - Mohair Luxe and Clown:

1p: * 1 Persons., 1In. * - from * and up * Alternate to the end of the r.;
2p: * 1ness., 1 liter * - from * and up * Alternate to the end of the r.
From the 3rd r. shift the drawing to 1p.;

  • nO3 pattern: Pouring, performed by Mochlorian yarn NO6 knitting: on the front side - omission. p., on the wrong side of those. P.

Density: on the NO1 pattern, NO8 16P spokes. at 20r. equal to 10 cm per 10 cm; On the NO knitting pattern NO6 14P. on 23r. equal to 10 cm per 10 cm.

Description

Before and back

Knitting and backing the sweatshirt is performed by one detail. We recruit in two threads 150p. And knit: 1kr., 2p. - Pattern NO2, 144P. - NO1 pattern, 2P. Pattern No2, 1kr. We indicate the "lines of lateral seams", placing markers after the 39th and 111th n. On 38cm, closed 3P. before and 3p. After markers. Each part is tolding separately. We do in work on 36P. On each half of the transfer and 66p. on the back.

Right half pass

For the armor, we close on the left, in each even r. 1 time 2 loops and 5 times 1P. The remaining 29p. We swell right. Having received 20 cm from the beginning of the armor, lay these p.

Back

Under the armies, we close on both sides in every 2nd r. 1 time 2p. And 5 times 1P. The remaining 52p. Knit straight to 20cm from the beginning of the past. Delay n.

Left half pass

We perform symmetrically right.

Sleeve

We recruit NO6 mooring yarn 33P. Knit the NO3 pattern, adding on both sides in each 14th r. 9 times 1P. We get 51p.

Okat

Non-57cm, cloth. At the edges, symmetrically, once on 3P. and once 2p. Then, in each through the p. four times 1p., in every 4th r. 8 times 1P. And again in every 2nd r. 1 time 2p. And 1 time 3p. At an altitude of 20cm, the remaining 7P is closed from the beginning of the occasion of OKAT.

Assembly and finishing

We transfer to one knitting 29p. Right shelf, 7P. Sleeves, 52p. backs, 7P. Sleeves, 29p. Left shelves and encourage 2p. Patter NO2. Close n. On the pattern. Step the sleeves and sew them.

Gentle sweatshirt - Mochhar web: video MK

Long jacket - moss jacket

This model, using the proposed description, can be associated in any of the 4 sizes: S; M; L; XL.
Top width 104; 112; 120; 128cm.
Length 82cm.

We will need:

  • mohair Luxe yarn, as part of 77% mohair, 23% silk, (25g on 175m), dark gray - 50; 75; 75; 100g;
  • the same, blue color - 50; 75; 75; 100g;
  • the same gray color is 50; 75; 75; 100g;
  • the same, white - 50; 75; 75; 100g;
  • sp. NO5;
  • markers.

Pattern: Persons. smooth: for persons. Side - persons. p., On the wrong - Iz. P.

Density: 18p. by 24r. equal to 10 cm per 10 cm.
Alternation of color stripes: Each strip is sympathetic to 20cm with consistent alternation - dark gray, blue, gray, white.

Description

Before and backing the sweatshirts are connected by one detail.

We recruit the dark gray yarn 188; 204; 216; 232p. Knit people. Studge, alternating color stripes. To indicate the "side lines", we set markers after 47; 51; 54; 58P. and after 141; 153; 162; 174p. At a height of 15 cm from the beginning, to the marker, we make the addition 1p. Facial crossed, knit 1l. After the marker, linking 1l., Repeat the 8P gain. Facial crossed. We get 192; 208; 220; 236P. We repeat the additions three times in each 8th r., Having accurately above the previous add-ons. We get 204; 220; 232; 248p.

At an altitude of 27cm from the beginning, we perform to the marker 1 stretch (removing 1p., 1l., Stretch through the removed), 1l. And after Marker: 1l., 2p. in 1l. We repeat the outflow in every 12th r. Three times, having every output accurately higher than the previous one. T. about. We have reduced the number n. between the refusals - 188; 204; 216; 232P. We continue right. At an altitude of 60cm from the beginning we share the cloth on the marker border and knit the shelves of the transfer and the back is separate. For the shelf it is 47; 51; 54; 58p. For back - 94; 102; 108; 116P.

Pink

Performed on 94; 102; 108; 116P.

Armhole

Close from each side 1 time 4p., 1 time 3p., 1 time 2p. and 2 times; 3 times; 4 times; 6 times 1P. We have 72; 78; 82; 86P. At altitude 22; 23; 24; 26cm from the armor closer all p. The first 23; 25; 26; 27P. and the last 23; 25; 26; 27P. - loops shoulders, and central 26; 28; thirty; 32P. - Peel the neck.

Right half pass

Performed on 47; 51; 54; 58P. The armor on the shelter on the left is upset by the description of the back. At the same time, we reflect on the right 12 times 1P. In each 4th r., plus 1 time 1p. in every 2nd r.; 12 times 1P. In every 4th r., plus 2 times on 1P. in every 2nd r.; 12 times 1P. In each 4th r., plus 3 times 1P. in every 2nd r.; 14 times 1P. In every 4th r., plus 2 times on 1P. in every 2nd r. We close the remaining 23; 25; 26; 27P. For the shoulder at the same level as for the back.

Left half pass

Tie mirrors.

Sleeve

We type 44; 48; 52; 56P. From the yarn of dark gray. Knit people. Smooth, increasing every 12th r. 9 times per 1P. We have 62; 66; 70; 74p.

Okat

51cm from Niza (in the same r. And the color coinciding with the back). On each side in each 2p. 1 time 4p., 1 time 3p., 1 time 2p. We reduce 10 times; 10 times; 11 times; 11 times 1P., Then in each 4r. 3 times 1p., We are then closed in every 2 p. 1 time 2p. At level 16; sixteen; 17; 17cm From the start of the rounding, we close the remaining n.

Assembly

Stead your shoulders. We sew the sleeves.

Simple model of Mochhar sweaters: video lesson for beginners

Single scheme




Mohler is a fairly versatile yarn. From it you can connect a thing for any weather: from warm winter sweaters to the light spring chaleems. Needlewomen who can work with the needles can always make an original thing for themselves. Today you can find women's sweaters from mohair, suitable for any occasion.


Thin mohair pullover

Those who are just starting to master knitting, sometimes it is not easy to choose a suitable thing. I want to make a beautiful pullover for yourself, but it is not yet possible to deal with complex schemes and pictures. This is just this suitable model of this thin pullover. It knits the usual facial stroke. However, thanks to soft mohause and beautiful steel color, it looks stylish.

It will take:

  • 150 grams of yarn with the addition of mohair (80% mohair, 20% polyamide, 245 m in 25 g);
  • spokes number 6 and 9.

The work uses only 2 types of drawing:

  • rubber 1 * 1: Facial and invalid loop alternately knit alternately;
  • facial smooth: Facial rows - facial loops, Pouring p. - Pouring p.

These 2 drawings are considered fundamental in knitting needles. Therefore, such a sweater from mohair may well become even the first thing that will connect the needlewoman. The entire calculation is given on size 38/40. Of course, it is possible to increase it by simply adding the required amount of loops and rows.

Knitting should be started with the back. Screw to the knitting needles No. 6 60 p. And to stick with a rubber band 6 cm. Replace the hinges on the knitting needles number 9 and continue knitting facial stuff. Immediately in the first row evenly reduce 12 p. So that the sweater looks harmoniously.

For armor after 60 cm knitting (it is desirable to try on to ourselves that all coincided) close 2 p. On each side. Then drop in every 2 row of 2 p. It is necessary to do it before and after the first first and last loops so that the SCOs walk uniformly. When the backrest length becomes 76 cm (again it is desirable to try on it) close all the remaining loops.

Actually, the front of the sweater knit the same way as the back. First there is an elastic band, then facial smooth. The only difference is the neck. For it, close 16 p. In the center at an altitude of 64 cm from the edge. After that, both parts knit separately. That that is not yet needed, going to a special pin.

In order to complete the knitting for a sweater, it is necessary in each part of the 2 p. 1 time and 2 times on one p. After 76 cm, close the shoulder. Again, you should not forget to seek the front part every time.

It remains still to connect the sleeves for the sweater. Screw to the knitting needles No. 6 31 and to peck with a rubber band 6 cm. Go to the needles number 9 and continue knitting facial stuff. At a distance of 16 cm from the edge, start the addition in each 2 row of 2 n. From the beginning and end after 2 p.

To make the suture, 54 cm close at a distance of 2 p. On both sides. Then drop in each 2 row 3 times one p. Up to 2 last and after the first first n. As soon as the length of the sleeve reaches 64 cm. Close all loops. Do not forget to try on yourself in order not to make a mistake with the size.

Now you can proceed to the assembly of a sweater from mohair. Connect the back and in front of one from the shoulder seams. Dial for the neck 65 p. And to plunge 4 rows. Close. Run the 2nd shoulder seam along with the throat of the neck. Swing sleeves and connect the pullover on the sides. Everything is good to disappear and you can try your first sweater from mohair.

Openwork sweater "Bear tenderness"

However, if the mooring sweaters with the schemes would only be simple, it would hardly have this yarn so popular. One of its advantages is the ability to tie beautiful openwork things. The next pullover of mohair perfectly proves it. However, the entire arsenal of knowledge about knitting and crochet is already useful here. But the result will be radically different from others.

It will take:

  • 65 grams of blue mohair (25 g / 250 m);
  • spokes №3.5-4 cm;
  • 2.5 cm hook.

Below is a pattern scheme. The number of loops should be multiple 34 + 16 for symmetry, and 2 more edges. To accurately calculate the number of desired loops for a set, it is recommended to connect a sample with a size of 10 * 10 cm. Then only begin to knit a sweater.

Back, in front and sleeves fit according to the scheme. It is only necessary to form a premium and a neckline for a neck. Where and how to do it is shown in the figure below. Also, this can be understood by trying out every detail on yourself. After completing knitting, collect all together. Take the sleeves and the neck according to the pattern in the diagram. Another original mohair sweater is ready.

At the end I would like to see that the mohair is really universal yarn. From it you can associate any thing that can only come to mind. With mobility yarn easily and pleasantly work. And the sweaters are obtained by gentle, air and warming soul.

Video: Mochper jumper with their own hands

Large selection for knitting products made of mohair

















Fashionable detail: A wide cutout by a boat, the depth of which can be changed.
The size42 (46). Different data for larger size are listed in brackets (Pattern date in Fig.2)
Material:300 (350) g
Patterns:
- Facial smooth
- openwork according to the scheme
- Rubber 3x3
Back. Type 74 (84) loops on the knitting knitting and knit smooth cloth. After 27 cm from the bottom edge of the part, go to the openwork pattern and associate another 6 cm. Then, for the side of the skeys, we reduce the faces of the canvas 1 p. In each row 4 times through a row - 10 times. When the height of the associated canvase reaches 43 cm, the loop of the last row (on the spin of them 46) leave open and rearrange onto the pins, the thread will disrupt.
Before Tie as back.
Sleeves. Type 54 loops on the knitting needles and knit a facetery of 40 cm. Then go to the openwork pattern and link another 6 cm, then start designing the bevels. Perform them as on the back. Loop of the last row (26) Leave open and rear on the pins. Similarly, tie the second sleeve.
Assembly.Connect the back and in front of the sleeves along the regulated lines. Then perform the side seams and seams of sleeves. Open loops along the cutting of the neck Remove from the pin on the knitting knitting on the knitting knitting pin and knit the rubber band in a circle of the bar with a height of 10 cm. The loop of the last row close the straight, not tightened. Spacked the bar on the wrong side and carefully enter the base. The neck will look like "brand", if it is necessary to arrange it: remove the bar on the front side of the sweaters, open loops are suitable for the base of the plank. Inside the plank can be conceived a very thin haired rubber band in color.
Susanna



The calculation of the loop due to the free silhouette of the pullover is suitable for three sizes.
You will need:yarn (75% mohair, 25% polyamide, 80 m / 25g) - 425 g yellow-pose; Spokes number 4.5; Short circular spokes number 4.
Rubber: Alternately 2 facial, 2 irons.
Facial smooth: Facial rows - facial loops, invalible rows - enhancing loops.
Knitting density: 18 px 25 r. - 10 x 10 cm.
Back: Dial 146 p. And knit 3 cm with a rubber band, continue to work facial stroy. For narrowing, in the 7th p. The face glady 29th and 30r p. Spent together by the facial, 117th and 118 p. Slice together with the inclination to the left (\u003d 1 p. Remove as in the face of knitting, 1 p. Peak face and stretch through it removed loop), obtained loops mark. These accurates (marked loop and the previous, respectively marked loop and the following to check together) can be repeated 22 times in each next 6th row \u003d 100 p. After 60 cm from the lower edge of the part, close from both sides for the proy 1 time 3 p., 2 2 p. and 3 times on 1 p. In each 2nd p. \u003d 80 p. Knit straight. After 78 cm from the lower edge of the details, the average 26 p. And both sides finish separately. To round the cutout, close in each 2-p. 1 PAZ 3 p. And 1 time 2 p. Then close the remaining 22 p. Shoulder.
Before: Knit, as a back, but only after 58 cm from the bottom edge of the part for the V-shaped outline, the operation is divided in the middle and both sides finish separately. For the bevel of the cutout, it is separated alternately in every 2nd p. and the next 4th p. 18 times 1 p. After 80 cm from the lower edge of the detail, the remaining 22 p. Shoulder.
Sleeves:dial 38 p. And knit faces. smooth. For the bevels, add 18 times 1 p. In each 4th p. \u003d 74 p. At an altitude of 32 cm. Close on both sides for Oaka 1 time 3 p., 1 time 2 p. And 3 times 1 p. In each 2nd p., 5 times 1 p. In each 4- m r., 1 time 1 p., 1 time 2 p., 1 time since p., 1 time 4 p. and 1 time 5 p. in every 2nd p. Then close the remaining 18 p. For a wave to dial up the lower edge of the sleeve 38 p. And knit with a rubber band (start and finish the edge loop). At an altitude of 2 cm in each irons, add 1 p. (\u003d 47 P), at a height of 3 cm in each front track 1 p. (\u003d 56 p.), At an altitude of 4 cm in each marking track, add 1 p. (\u003d 65 p.), At an altitude of 5 cm in each facial path, add 1 p. (\u003d 74 p.). Knit in the new rhythm - alternately 4 persons, 4 is ezd. Turning a width of 10 cm wide, loops close.
Assembly:perform seams. Insert, slightly requested, sleeves. For the collar, type 119 p. And knit on circular spokes 2 p. facial and 1 r. izn. loops, while in the 1st and 2nd p. In the middle of the transfer 3 p. Slit together, as well as in the 3rd p. Close the middle loop reference \u003d 114 p. Tie another 2 r. Facial stroke and 14 cm rubberry, then loops close.
Verena 1995-11

saturday, December 15, 2007


You will need: 750 (800) Belisana beige yarn (70% royal mohair, 15% wool, 15% polyamide, 115 m / 50 g); Spokes number 3, №7 and №9; Long circular spokes number 9.
Facial smooth: Persons. R. - Persons. p., izn. R. - Ozn. P.
Patent pattern, persons. and erased. R.(odd number of loops).
1 row (izn. R.): Krom., 1 Persons., * 1 p. Remove with Nakud as NAV., 1 Persons., Repeat from *, chrome. 2 row: chrom., 1 p. Remove with Cathwood as ezn., * Loop with Nakada to stick together., 1 p. Remove with Cathwood as erased, repeat from *, chrome.
3 Row: Krom., Loop with Nakud to lie together., * 1 p. Remove with Cathwood as ezn., Loop with Nakud to stick together., Repeat from * chrome. Repeat 2 and 3rd r.
Patent pattern, circular p. (even hinges).
1 Circular Row: * 1 p. Remove with Nakud as NVD., 1 is, repeating from *.
2 Circular Row: * Loop with Nakad to lie together., 1 p. Remove with Cathwood as ezn., Repeat from *.
3 Circular Row: * 1 p. Remove with Cathwood as ezn., Loop with Nakud to stick together., Repeat from *. Repeat the 2nd and 3rd r.
Knitting density.Persons. Sloalk, Spokes number 7: 11-12 p. and 15 r. \u003d 10x10 cm; Patent pattern, spokes number 9: 9 p. and 18 r. \u003d 10x10 cm.

Attention! Jacket knit thread in 2 additions.
Back: On the spokes number 7, score 59 (67) clause and tie 1 out. R. Purchased, then knit faces. Ironing, closing for inflow on both sides in every 10th p. 3x1 p.; To do this, at the beginning of a number of chrome. Remove 1 p. as faces., 1 persons. and stretch it through the removed loop; Slit a row to the last 3 p., Slit 2 p. Together of persons., Krom. \u003d 53 (61) p.
At an altitude of 28 cm from the set of the edge, add 1x1 p., Then in each 8-m. 2x1 p. \u003d 59 (67) p. At an altitude of 46 (44), cm Close on both sides for the 1x3 p., Then in each 2nd p. 3x1 p. \u003d 47 (55) p. At an altitude of 62 cm from the set edge for the neckline of the neck, it is directly average 23 p. And on both sides of them after 2 p. Another 1x2 p. At the same time at an altitude of 64 cm, close on both sides for the shoulder bevels in each 2nd p. 2x5 p. (2x7 p.). At a total height of 66 cm all loops close.
Left shelf: On the spokes number 7, dial 4 (8) n. and tie 1 out. R. Purchased, then knit faces. Schedule, at the same time for the front rounding from the left edge in every 2nd p. Rapid 1x3, 7x2 and 4x1 p. Simultaneously from the right edge, close to include in each 10-m. 3x1 p. \u003d 22 (26) p. At an altitude of 28 cm from the set of the edge, perform lateral SCOS and at an altitude of 46 (44) cm to associate the ruble, as for the back, and at the same time at an altitude of 42 cm to dwell to the seal of the neck 1x1 p., Then in each 4th p. 8x1 n. To do this, peck a row to the last 3rd p., To peck 2 p. Together of individuals. and chrom. At an altitude of 64 cm tie the shoulder squeezes, as for the back.
Right shelf: knit in mirror reflection. For the cutting of the neck of the neck after chrome. Remove 1 p. as faces. 1 persons. and stretch it through the removed n.
Sleeves: On the spokes number 9, dial 39 (43) p. and * bind the patent pattern 11 cm \u003d 20 p. Then the knitting number 3 2 cm of persons. Item \u003d 6 r., From * Repeat 3 times, work with spokes No. 9 patent pattern. Stripes of persons. Always start knitting from an invalion series and end the face nearby. At an altitude of 59 cm, close on both sides for the Oak sleeves 1x3, then in every 2nd p. - 1x2, 7x1 and 1x2 p. After 70 cm from the dialing edge, the remaining 11 (15) n. Close directly.
Assembly: Refrigerate parts, slightly moisten and give them to dry. Perform all seams, sew the sleeves. For the plank, type 252 (266) p.: Under the lower edge of the back - 42 (48) p., By roundings - at 25 (29) p., According to direct front sides - by 26 p., By dumps of the neck of the neck Shelves - 42 ppm and the neck neckline - 24 p. Knit with patent pattern with circular rows of 18 cm, then all loops are free to close.
Attention! The bar can also be associated from 2 parts of the persons. and erased. R. To do this, start dialing the loop from the bottom from the middle of the back and end in the middle of the neck of the neck of the back (127 (135) n. For each plank). Side sides of the slats sew; Show below the back of the back to do from the elevation, along the neck of the back - with individuals. Parties.

- This is not just one of the thinnest threads, but at the same time, the warmest yarn to confuse various clothes. It is made of wool angoras on special equipment. After that, it turns out a high-quality thread, from which the needlewomen knit beautiful and comfortable things in the sock. Who did not dreamed of having in her wardrobe, moogherie sweaters, who are not only with pants and jeans, but also with skirts, as well as on top of the dresses. We invite you to get acquainted with some proposed schemes and tie your own hands a classic Sweaters.



To work, it is necessary to use the needles with a fishing line at number 5, as well as mohair yarn, can with the addition of wool or polyamide. According to calculations that will be brought to knitting, your must turn out for forty-eighth size. If you want a larger product, then you will need to initially increase the loops. And accordingly, if you need to do less, then at the very beginning, dial fewer loops.

Women's mooring sweaters, like men, begin to knit with the knitting with the bottom. Type about eighty kettles and begin to encourage the front part. For gum, you need to perform alternation of facial and insolne loopers. The gum should turn out in the width of six centimeters. After that, work on facechair begins. The product knit in a straight line until the length of fifty-seven centimeters is reached. Next, it is necessary to decrease to form a neckline. Central buttons in the amount of eight pieces are closed, continuing to knit left and right shelves separately. The outbreak continues until the roundabout occurs. In each strip through one, the closure of two loops should be performed one time or three times one room. The remaining hinges on the tool are also closed. The height of the product must be approximately sixty-four centimeters.

The spin of the mooring sweater knits with knitting on a similar scheme. The difference is only the fact that no eight should be closed for the cut, and twelve central loops, and from each side it is closed once a three levels.

Now you need to make sleeves. To do this, it is closed with spokes of thirty-two loops and a simple elastic band fit. Its width should be five centimeters. In the last strip you need to make an increase in the amount of 24 pieces. The work continues with facial stroy with add-making adds. From both sides, one link should be added in each fourth strip. Doing it thirteen times. Then, through a row, add 1 loop four times. The total length of the sleeve should be 45 cm. The second sleeve is performed in exactly the same way.

When all the details of the sweaters are connected, it is necessary to collect everything and sew together. Attach the front part of the sweater to the rear and seek them in any way known to you. Then connect the sleeves and enter them into the sweater. The edges of the threads are hiding with the hook in the inside of the product. Now knitting a mohair sweater is fully completed.

Casters with experience perform a knitting sweaters from mohair not facechair, but by other various patterns. For this purpose, the famous spit and harness pattern is perfect. Such an ornament is universal, both for women's things and for men.

Openwork sweaters from Mochhar are considered fashionable and from year to year enjoy stable demand. Their popularity is constantly growing, especially among knitters, which come up with various combinations of patterns. For example, a relief plank will look very impressive with an openwork pattern. In this beon, facial and irons are also involved, as well as the openwork, which knits with the needles according to the scheme. The back is almost always performed in such products, as before, it is only necessary to increase the loops for rounding the count cutting. For the collar part, loops are gaining and knitted in a circle. Then make a transverse elastic and cover the product with facial hinges.



Knitting with moorling sweaters can be viewed on the video that is in this article. Especially it will be informative for beginner needlewomen.

Video: Learn to knit mohair sweater


Among other varieties of needlework especially love mooring yarn. It is made of goat wool, so it is characterized by softness and weightlessness. In view of these qualities, as well as many others, mohair and popular, because his weightless thread is capable of warming even in severe frosts.

Why mohher so popular

It follows that it is from mohair that the thinnest, openwork and sophisticated products may be possible.

Even a knitted pullover will look different if, among other things, you will prefer the mohair yarn. In addition, Mochhar has a number and other wonderful advantages.

1.Mhereh yarn hypoallergenne. The process of making mohair on modern equipment allows you to achieve high quality final product. Therefore, things from such threads never cause itching, irritation or other manifestations of skin allergies.

2. SPECIAL COMFORT. For example, a mohair pullover, top, shawl or other product, knitted from mohair, are perfectly preserved heat. However, in the hot season in such clothes, it will still be comfortable because it perfectly misses the air.

3.Moker is characterized by high strength. Let the thread in such a sniffer, but at the same time it is quite problematic to break her hands. From this quality it follows the following, namely wear resistance. The main thing, while complying with the rules of washing and care for things.

Choose high-quality yarn

The mohair is divided into several species. It all depends on what wool is made of yarn. The finest and most gentle among others is Kid Mohair. To achieve such high qualities, they cut the most young goat. As a result, with the help of such mohair knit incredibly thin clashes, shawl or other elegant products. It is valued by Kid Mohair and young moms who knit by weightless threads and needles children's things.

But the yarn called goatling is made after a haircut of the wool of young animals. It is not inferior to their properties to the rest of the mohair, but to the touch slightly hard and denser. As a rule, with its help you knit dresses, pullovers, vests. The same name has a moceric yarn made from the coats of goats aged 2 years and more. However, 3 type of yarn is characterized by the largest density and rigidity. The thickness of 30 microns is ideal for knitting with spokes.

There is nothing new regarding the selection of the spokes - the exact number of those tools for knitting, which recommends the manufacturer, is specified on the label.

Do not forget about the sample. The Council is relevant in particular for those who have never worked at all with mobility yarn. Training on the sample will help to understand how exactly it should work with such a thin and delicate thread.

Knit fluffy openwork pullover

The following model will suit the owners of 42 or 44 of the size of clothing. Remember that this model provides a dual thread mating.

The material will need yarn, as part of which more mohair and slightly less acrylic (about 30%). When choosing tools, you should give preference to the knitting needles 7 and 9. In addition, you have to work with circular spokes.

The selected openwork pullover includes a facial surface, as well as an English gum. The exact schemes of these drawings are presented in the photo.

Back Pullover

We start knitting the mooring pullover with the back. To do this, you need to type 59 kettles. Loops dialed facial stroke. Remember that when viscosity should be resulted in 1 loop 3 times in each 10 row on both sides. As a result, you should have 53 loops.

So, your pullover, that is, its back has reached a height of 28 centimeters. This means that in each 8 row you need to add 1 loop from the edge. Repeat such a hard manipulation 3 times. You have to form 59 penets again.

When the mooring pullover reaches 46 centimeters, begin to knit the armchair. Start them from closing the first 3 loops. After that, close 1 loop 3 times in 2 row. You must remain 47 kettles.

The convenient pullover of mohair cannot be imagined without a neat neck. First, make a neckline - close 17 loops in the middle, squeezing 18 centimeters from the very beginning of the armor. Now complete the usual rounding by the additional recess 1 loop 2 times in each next 2 row. Perform the shoulders when the openwork accessory will reach 66 centimeters of height. Knitted mohair pullover must have a total height of about 68 centimeters.

Get on the right shelf front part. Type 4 loops with the needles and make a facial pattern. Do not forget at the end of the right side to add 1 looping 3 times in each 2 row. In the same way, add 2 loops for 7 times and 1 loop 4 times. Openwork pullover will be elegant if you plit it. Use for this the same way as in the case of the backrest.

Get the shelf height of about 42 centimeters and perform sufficient harness for the neck. When you check the item to 66 centimeters, you will need to perform a neat bevel of the shoulder and finish knitting from mohair. Knitting the left shelf occurs similarly.

Take up the design of the sleeves - type 39 kettles. Alternate English elastic and facial smooth to the height of the details in 59 centimeters. Finish the alternation of the drawings and continue to knit openwork pullover only by English elastic band. Forming the peel of the sleeves, burn around the edges in each 2 row of 2 loops, then 1 loop for 7 subsequent rows. Finish on recess 2 loops. On the spokes there should be 11 capeners, which should be closed. Knitting 2 sleeves is carried out similarly.

Build details

One of the final stages is an assembly of details. Carefully sew knitted sleeves. Then cover them in those places where it is necessary. Now you can proceed to connect the backrest and shelves along the shoulder line, as well as sides.

It's time to proceed to knitting a border. It does not take too much time and requires only the use of circular spokes. Using such spokes, lift 252 loops on the edge of the sweatshirt. The lifted loops lie to the English elastic band, the width of which should be at least 18 centimeters.

The long-awaited moment comes. Close the loop and cut the thread. Your wonderful pullover is ready!