Quilling is a sophisticated hobby for noble ladies. Quilling: learning to create real masterpieces using the paper-rolling technique

11.08.2019

There are many ways to please yourself and loved ones by making crafts with your own hands. One of them is to make a picture using the quilling technique, as experienced needlewomen advise. Of course, to master the basic techniques of this applied art, it will take a lot of time and a fair amount of perseverance. But the result will exceed all expectations! With patience, you will understand how to work with quilling and be able to create beautiful compositions.

Quilling - the art of paper rolling

Quilling is the art of paper rolling, that is, making flat or volumetric compositions from long and narrow strips of paper twisted into spirals. The finished spirals are given various shapes. This is how modules are obtained from which works are created - paintings, postcards, albums, frames, figurines, etc. The art of paper rolling emerged at the end of the 14th century in Western Europe. It is believed that quilling was invented by monks. Cutting off the gilded edges of the books, they twisted them onto the tips of bird feathers (hence the name, since quill means “bird feather” in English) and thus created an imitation of a golden miniature.

In the 15th - 16th centuries, paper-rolling was considered an art, in the 19th century - a ladies' entertainment (and almost the only needlework worthy of noble ladies). In the 20th century, interest in the quilling technique faded away, and only at the end of the century the art of paper rolling again entered the life of art lovers.

The Korean school of work in the quilling technique is different from the European one. European works, as a rule, consist of a small number of details, they are laconic, resemble mosaics, adorn postcards and frames. Eastern masters create complex pieces that look more like jewelery masterpieces. The finest volumetric "lace" is woven from hundreds of small details.

Another manufacturing technique deserves special attention - contour quilling. Works in this technique are also created from long narrow strips that are placed on the edge. Due to the use of the same material, this technique of working with paper is also called quilling, but due to the fact that the stripes are placed on the edge, the drawing is contoured. Products look more lively and realistic. And "mixed" works look especially good, where both quilling techniques are used - regular and contour.

Quilling technique for beginners: what tools and materials are needed for work

Before you start quilling, you need to know what you need to work. Next, you will find out what tools and materials beginners need for the quilling technique.

Paper. In quilling, long paper strips are used, which are 3 mm, 5 mm, 7 mm, 10 mm and 1.5 cm wide. You can cut the desired strips yourself with scissors. There are also special table-top machines for cutting paper into strips for quilling. But it must be borne in mind that quilling stripes are of the same color on all sides, i.e. not only from the wide side, but also from the rib side, while regular colored paper, when cut, often gives a white rib.

Stripes come in different densities, metallized, glitter, etc. Which strips to choose depends solely on your imagination and future picture.

Stripes can be purchased in one color or with transition tones in one set. There are sets of different colors. As a rule, all strips are about 30 cm long (AA sheet length). If necessary, you yourself make the strips shorter by cutting them, or longer by gluing several strips.

A pen. Typically, this tool is simply referred to as the "quilling tool". It can be metal and wooden, double-sided, single, only with a fork and a ball. What is it?

In essence, this is a pen, at the end of it there is a fork, into the slot of which a paper strip is inserted and twisted. The fork can be of different heights: 3 mm, 5 mm, 10 mm, 1.5 cm, i.e. meets the same specifications as paper. It is best to have several tools in stock, for example 5mm will work for 3mm and 5mm, and 1.5cm will work for 10mm and 1.5cm. It can be two different tools or one with two tips.

You can even do with the means at hand - use a toothpick, needle or match. You can make a tool yourself: take a needle with a large eye, bite off the small tip of the ear (you get a fork), and stick the needle itself into a cork or wooden handle.

Diameter template. When talking about tools and materials for quilling, don't forget about templates. This is a regular ruler with circles of different diameters. It is convenient to use it to create elements of the same size: twisting the desired spiral, you lay it in a circle of the required diameter, and measure the rest along the same circle.

As a rule, in our stores they sell rulers only with circles, but if you want to delve into this type of creativity, I recommend that you look at foreign ruler sites, in which there will be templates of all geometric shapes.

Tweezers. There are tweezers with different noses, the most popular is with an angled nose, i.e., the nose is lowered down. But you can also use stationery tweezers (in the absence of these, you can take tweezers from the manicure set). Tweezers are used not only to lay out the finished modules during assembly, but also to firmly press the tip of the paper strip against the spiral when gluing.

Glue. PVA is best, but good glue stick, stationery, or clear glue can work as well. Most importantly, I applied very little glue so that the paper does not deform.

What additional tools are needed for quilling? Each year, a collection of new tools is added to improve the quality of your work while reducing costs. There are various templates for making flowers, snowflakes and other objects, a machine for creating corrugated strips, a quilling coach (a tool for making even spirals), "combs" for creating loop quilling, etc. Quilling paintings are made up of small details called "modules". Modules come in many forms. They are always created according to the same principle: first, the roll is twisted, after which it is slightly “unraveled”, and the tip is sealed. Such a part is called a "spiral", and modules are created from the spiral by different pressure on it.

Various elements of quilling: a technique for performing basic modules for creating compositions

Various elements are used to work in the quilling technique.

Tight spiral - twist the tape and glue the tip without removing the spiral from the needle so that the tape does not unwind.

Bagel - before doing this one of the main elements of quilling, twist a tight spiral, slightly loosen and unwind the inner part so that an empty space is formed.

Spiral bagel - twist a tight spiral, loosen slightly so that there is more around the edges of the paper, but do not completely dissolve.

Tight oval - take a pen or pencil, wrap a strip of paper around them and glue the tip. As a result, you will get a donut with a big hole. Then lightly press down on both sides with your fingers, making the module an oval shape. Free spiral - twist the tape, loosen it a little to the desired volume and glue the tip.

A drop is one of the basic elements of quilling. Make a loose spiral and squeeze it on one side, shaping it into a drop.

Petal - Make a drop quilling unit and pinch the rounded tip slightly. You can make pinches at different levels, thereby changing the shape of the petal. Curved Blob (Paisley) - There are two ways to make this module. The first is to make a drop, and then bend it in the desired direction. The second, and more accurate, way is to bend and create the drop at the same time. Then the paper will fold smoothly and neatly.

Eye - make a free spiral, then pinch on both sides at the same time, being careful to maintain symmetry.

Curved petal - make a free spiral, press lightly, giving the workpiece an oval shape, then pinch and bend, first on one side, then on the other. When making this element using the quilling technique, do not forget that you need to bend it in different directions - one side down, the other up.

Bird's foot - make a free spiral, squeeze a triangle. Fold two corners towards the third and press firmly.

Flower (or circle with a notch) - make a free spiral and, holding the workpiece with your fingers, press down on one side with a pen or pencil.

Lily of the Valley - make a flower module and twist the tips outward with an awl or the base of a quilling tool.

How to make basic geometric elements using the quilling technique

Square - make an "eye" module, place it between your thumb and forefinger so that the corners are clearly under the fingertips. Now squeeze the module and release. You have got four corners equidistant and you can form a square.

Triangle - Make a free spiral and squeeze it in three places to make a triangle.

Semicircle - make a loose spiral, lightly press down with your fingers, giving a light oval shape. Now pinch the "sharp" parts of the oval and lower it down slightly.

Arrow 1 - make an "eye" module, then fix one corner between two fingers, press the other corner so that you get a sharp triangle. Release and see that you have formed four corners that resemble an arrow.

Arrow 2 - make a free spiral, squeeze it into a triangle. Press the two corners together to form an arrow.

Star - Pinch evenly five times.

Such elements of quilling are called open to create a composition that does not need to be glued, i.e. close. They are created by twisting the tape to one side or the other.

Below you will learn about the step-by-step quilling technique when performing various applications.

How to make a craft "Lavender" using the quilling technique: step-by-step work

The most common form of quilling is floral motifs of varying complexity. The following is a description of creating a simple option using the quilling technique, which will allow you to understand all the basics of creating, constructing and combining elements.

To make the Lavender applique using the quilling technique, you will need:

base paper
stripes for quilling division and lilac (you can take 2 lilac colors - one for flowers, the other for a bow)
template ruler
PVA glue
tool for quill
glue brush

First, we twist spirals from one strip, dissolve them equally using a ruler with a template, glue the tail and slightly squeeze, turning it into an oval. Such modules must be made at the rate of 9 pieces per flower.

Making the stems. To do this, glue 2-3 green strips so that they are better seen, spread glue on the edge and place a strip of glue on the paper. Do not glue the bottom of the strip yet.

Assemble the finished parts.

Now we are making leaves. To do this, we twist a spiral of 2 stripes and give it a "Curved petal" shape.

Let's move on to creating a bow. First, let's make the ribbons. They are made in the same way as leaves, i.e. have a "curved petal" shape. It is enough to take 1 lilac spiral.

Now, when working with paper using the quilling technique, we make the bow itself. We twist a spiral from two strips, dissolve it and squeeze it so that we get a shape similar to a heart.

We add new modules to the already glued ones.

To finish creating the bow, cut off small strips of the same color as the bow and simply glue them between the stem and the bow. Distribute the ends of the stems as you like and fix them with glue.

Below is a step-by-step description of how to make an "Owl" picture using the quilling technique.

How to make a picture "Owl" using the quilling technique: a step-by-step description

Making a job like this is technically just as easy, but more time consuming. much more details.

You can prepare a sketch in advance, you can improvise, letting go of your imagination when drawing the details of this cute owl.

To create the "Owl" composition using the quilling technique, you will need:

base paper of at least A4 size
stripes for quilling: burgundy, dark blue, black, two types of gray, as well as a little white, beige and green for the eyes
PBA glue
quilling tool
tassel
template ruler

Let's start with the eyes. To do this, take half a black strip, half a white, one whole green, one brown and half a dark blue strip. Twist everything into a tight spiral.

Using two burgundy stripes and one blue one, twist the spiral, dissolve it, glue the tip and make a "crescent" module. Two such details must be prepared.

Using 1 blue and 1 black stripes, make a curved petal module. Two such details are also needed.

Using 1 burgundy and half a blue stripe, make a "blob" module.

We collect modules, forming the face of an owl.

We make two small triangles each from one black stripe.

We substitute them to the formed face.

We make many petal 2 modules from burgundy stripes. One strip is enough to create a module.

We substitute ready-made modules, forming the body of an owl.

Now create a lot of spirals using gray, blue, black colors.

Since these are future feathers, they must be made in different sizes - from larger to smaller.

The large feather will have one solid gray, one solid blue and one solid black stripes.

We collect wings from ready-made modules. If you used two types of gray stripes, alternate them with each other.

We make inner feathers according to the same principle. They can be of any color and size.

We decorate the gaps between the feathers with small tight spirals.

We make the tail. To do this, it is necessary to make feathers of different lengths - from longer to shorter.

To make the tail beautiful and different from the wings, decorate the feathers with tight spirals.

Glue a tight spiral to the finished nib and glue the entire part with an additional dark blue or black strip.

To give the owl a more complete look, make two banana-shaped modules and one complex module with a triangular edge.

To do this, use the instructions for creating a semicircle and pinch on one side to make a corner.

We substitute the finished modules for our owl. "Bananas" will frame the wings, another detail will complete the bird's head. The picture is ready.

The next section of the article describes how to make a craft from the "Delicate flowers" quilling.

How to make the composition "Flowers" from paper using the quilling technique

To make the "Flowers" craft out of paper using the quilling technique, you will need:

A4 base paper
quilling paper yellow, cream, pink, green in several shades
template ruler
PVA glue
glue sealant or hot gun
quilling tool

We will do this work with elements of contour quilling - two hearts in the center will be in just this technique.

To do this, take 10 strips of pink color and glue them together, gluing each subsequent strip just below the previous one.

Then we twist the resulting strip and release.

Glue the edge of the resulting curl. We form a heart from two such parts.

Let's move on to creating flowers. Flowers are created from individual petals. Twist the spiral from two cream and two yellow stripes and release it.

Then squeeze the part lightly and wrap it around something round, like a pencil. While pinching the edges, pinch the center to sharpen the petal.

Glue the tips of the petal together and clamp it with a clothespin.

For each flower you need to make 6 such petals.

Now let's make some simple little flowers. The tight spirals will be the center of the flower.

Spirals from two stripes will become the core of large flowers, from one strip - small flowers.

Once you have the right amount of detail for the flowers, do lots of paisley modules to create greenery around the flowers.

Now we start collecting work. First, glue the hearts.

In order to make the flowers more voluminous, you need to fix the petals at an angle.

To do this, you need to use a glue gun or glue sealant.

This glue not only adheres the petal to the base paper, but also creates a cushion that lifts the petal.

Glue the flowers step by step.

Then we frame them with green modules.

To create volume, stick some modules on top of each other.

Use tight cords to additionally decorate the work.

The next section of the article will be devoted to how to make the "Firebird" product using the quilling technique step by step.

How to work in the quilling technique: "Firebird" product

It is better to create more complex work with a prepared sketch. Draw what you want to get. There is no need to draw every module and all colors, it is enough to define the general color scheme and those modules that are important for conveying your idea. Here's another idea in the quilling technique.

For the "Firebird" product using the quilling technique, you will need:

base paper not less than A3
quilling paper
quilling tool
PVA glue
quilling needles or comb

We will create not only monochrome contour modules, but also rainbow ones. For this, several strips of different colors are glued together. We can mix as many colors as we want, in any order. It can be a smooth transition from yellow to red, then, when curled, this gradient will go from the center outward. Or it can be contrasting colors, then one color will frame the other.

We twist loose spirals of different sizes and colors.

Then we give them the necessary shapes: drops, paisley, semicircles, petals, arrows, tight spirals.

It is better to collect some of the elements separately.

Now we will make curved beautiful lines, the same method is used in contour quilling. Pick the colors you want to curl and glue the strips on top of each other at the tip. The more stripes you have, the more "fluffy" curl you will get.

Then twist into a spiral, but not tightly, so that the strips do not touch when wrapping.

Remove the spiral from the tool and loosen it slightly.

Now we glue the strips in turn, from bottom to top, each time, slightly weakening the tension of the strip so that a space is formed.

In this way, we create the required number of curls of different sizes, colors and shapes.

There is such a technique in quilling, which is called "quilling on a comb". The name speaks for itself - the elements here are created by winding paper in different ways on the combs of a flat comb. We will not delve into this method, we will only master the simplest way to create a module using this technique, and for this we do not necessarily need a comb! After all, we are making a rather large object, in our case there is no point in winding stripes on a comb. With the help of needles and styrofoam, we will create our scallop on a large scale.

We glue several strips. The resulting long strip is carefully wound on needles, be sure to pinch at the base. This is necessary not only for convenience, but also in order to create the correct shape. If you do not pinch, the strip will begin to loosen the tension and you will not get the shape.

Having completely wound the strip, glue the tip, and also drip a drop of glue at the base so that all rows are glued.

Using this technique, we create the required number of elements of different colors and sizes. Please note that the position of the needles can be changed every time, or you can leave it the same.

Having made the main part of the elements, we collect our bird, but do not glue it.

Some details can be favorably emphasized by combining them with each other: for example, so that the bird's body does not merge with the wing and tail, it can be pasted over with a contrasting strip.

The assembled parts can now be glued. Strive to glue the details tightly to each other, then the picture will look more delicate, and the background will be barely noticeable.

To fill the resulting voids, it is not necessary to manufacture new modules. It will be enough to make tight spirals of different colors and sizes. They will not only fill the space, but also visually enrich and complicate the drawing.

Having collected and glued the bird, you can think about what will surround it.

But do not overdo it, our bird itself turned out to be very bright, rich in elements, so it will be enough to make a small green twig and a small bud.

The following describes how to make a "Vase" craft out of paper using the quilling technique.

Craft "Vase" using the quilling technique with your own hands

On the one hand, creating shapes from quilling modules is a very easy task, on the other, it is extremely difficult.

But the whole difficulty lies only in the fastening of the parts and their correct fixation.

To make the craft "Vase" with your own hands using the quilling technique, you will need:

paper for quilling any color
PVA glue
adhesive sealant
quilling tool

First, create the bottom of the vase. To do this, we twist a large tight spiral and glue it with small tight spirals.

We glue the glued spirals with yellow stripes.

If the vase is straight, not expanding upward, then it is enough to evenly glue the finished modules tier by tier.

If you need to create a bending shape, use an adhesive sealant.

Drop it on the edge of the module according to the same principle as in the master class on creating delicate flowers, and fix it in the desired position.

While the sealant dries to prevent the modules from slipping, place something to hold the parts in place.

Make as many tiers as you like.

In this case, you can use modules of different shapes.

You are probably wondering what quilling is, and this is the question we will answer now. This technique can be described in two words - the art of paper rolling. The result is charming flowers, patterns, and more. Products, of course, are short-lived, but their life can be easily extended. It all depends on the quality of the material used and the place where the product will be stored.

What is quilling?

This is, first of all, handicraft, which will not take much of your time. In addition, it is completely uncomplicated to perform. Special efforts are not required to create masterpieces, so absolutely everyone can learn this kind of art. Quilling crafts are created by curling colored paper in a special way. Another name for quilling is paper mosaic. You can compare this art with jewelry. Its essence is to give the paper strips the necessary shape, with the help of which it will be possible to create a charming composition in the future.

History of origin

Historians have long argued about when this technique appeared. One of the versions says that it originated in medieval Europe, another claims that the birthplace of quilling is Egypt. There are also those who claim that this type of needlework was invented in the homeland of paper - China. In the 15th-16th centuries, the quilling technique was given an honorary status - art, and several centuries later it was considered the only entertainment of noble ladies. There was a period when everyone forgot about it, but at the end of the last century, quilling was revived again and became even more popular than before.

Materials required for quilling

You will certainly need:

Special quilling paper or plain colored. Then you will need to cut it into strips, the width of which should not exceed 9 mm.
Ruler.
Screw rod. Instead, you can use a toothpick, wooden stick, thin thorn, or thick needle.
Steel ruler.
Stencil with holes of different diameters.
PVA or other glue, as long as it is quick-drying.
Tweezers.
Compass.
Smooth manicure scissors.
Pencil.

Paper mosaic technique

You already know what quilling is, but that's not all you need to know about. Learn the basics of the technique thoroughly. It is very simple - the paper must be twisted into a tight spiral. To create it, wind the tip of the paper tape onto a winding rod or thorn in order to obtain a spiral of the required diameter. All elements for compositions are created according to this principle. To give the spiral a suitable shape, it should be slightly dissolved, and then formed into a quilling figure. It will hold if you secure it with glue.

To master this technique, start mastering the easiest thing - creating a simple quilling postcard.

Making a Postcard: A Lesson for Beginners

At the beginning of your work on creating a quilling postcard, you will need to be patient, since it will take a lot of time, about an hour for one piece. This time will decrease as you learn. Let's get to work:

Prepare a blank for a future postcard and use a simple pencil to mark what you are going to depict on it.
The main element used by quilling is called a roll. It is a tight roll of crumpled colored paper.
Do-it-yourself quilling means not only a flight of imagination, but also the use of all the materials at hand, such as toothpicks. You can hook a strip on it and wind up a roll. Then gently hold it with your fingers and loosen it a little.
Next, you need to give the roll the desired shape. To do this, flatten the edges with your fingers. Thus, you can get a wide variety of elements such as leaves, droplets, hearts and much more.

The element is ready! Use glue to attach it to the card.

Quilling flowers are formed from these elements.

Manufacturing schemes

So, quilling, schemes for making various crafts.

A simple spiral can be easily modified and combined with other elements, resulting in a variety of structures.

Here are the basic shapes you can make

How to make a flower?

Quilling flowers are very easy to create. Below is a list of actions that, strictly adhering to, will help you with this.

Glue two strips of colored paper together and wait for the glue to dry.
Twist the roll using a specially designed tool or other suitable means.
Take the roll very carefully and transfer it to the hole on the ruler of the diameter you need. So we get a spiral that needs to be fixed with glue. The size of the future flower depends on the thickness of the paper strip used and the diameter of the hole on the ruler.
Now we start forming a droplet from the resulting round spiral.
All the petals need to be glued together to form a flower. All elements must be folded so that all sharp corners are directed inward. Otherwise, you will get a completely different flower.
As the center, you can use not only paper, but also a pearl, fluffy spiral or beads.

One flower will not be enough, because in nature there are no flowers without petals. Are you wondering how to do this?

Twist the paper into a spiral. In this case, you can use two green stripes.
Use a pencil or pen to form a crescent moon.
Attach a piece of paper that matches the outside of the spiral to one end of the crescent. Now press the ends of the crescent well against each other. Then wrap a strip of paper around the spiral and glue the ends together.
That's it, this completes the creation of the petals.

Using the quilling technique, you can create both small paintings and more complex volumetric compositions. Of course, the process needs perseverance and accuracy, but believe me, it's worth it. You will get a beautiful job the first time, and this is the beauty of technology.

Now you know what quilling is, and you can safely get down to work. You need to start small - a small postcard. Gradually, you will feel more confident, and then you can start more difficult work.

Good luck in your endeavors!

Quilling is a popular hobby of our time. With its help, the extraordinary possibilities of simple paper are revealed. This type of creativity develops imagination and helps to concentrate and calm down. Using this technique, you can create decorative ornaments for the interior, postcards, unusual gifts. Let's try to start from scratch!

Quilling and its features

Quilling is the art of paper curling. This technique appeared in European monasteries. The attendants twisted miniature medallions using the tip of a bird's feather and gilded paper. The illusion was created that the jewelry was made of gold threads.

Currently, the art of creating paper works in this technique has captured many countries. This option is interesting creation of the finest masterpieces (volumetric and planar) from available and most common material. The work requires great accuracy, subtlety and concentration. But the result always pleases the creative person. .

Basic forms of quilling

The most important figure for all subsequent works is the circle. This element is modified and received a huge selection of parts.

Closed (closed)

Tightly wound spiral ... Most often we use it for the center of a single flower or volumetric composition. Many small circles in one work will make a grape branch or rowan bunches luxurious.
Slightly loose circle will serve as a simple petal or a blank for other parts. It is from it (differently curved) that all the main figures are made
Slightly flattened workpiece on one side - a drop.
Angled element with a curl inside - eye.
If the rolled tape is pressed down with a little effort on a round object (for example, a pen), we get a month.
Can you make an arrow (heart) ... The rounded part of the droplet is gently pressed with a sharp object to the sharp corner.
Leaflet - the shape of the eyes with a bend.
Semicircle .
Square .
Star ... We get this element by slightly pressing to the center of the side of the square workpiece.

There are open figures, these are all kinds of curls

V-helix ... The curls are directed outward.
Heart ... The tips are curled inward.
S-helix .
C-helix .
Cones .

What materials and tools do we need?

Thin ribbons of paper

Used as the main material. There are various ready-made kits available in art stores. The width of the strips is standard - 5 mm, the length varies. You can prepare the tapes yourself by cutting the copier paper. If the product is made together with a child, you can use strips 1 cm wide.

Tweezers

This tool will help you to neatly position the part in place or tuck the unwound edge.

PVA glue, stationery in pencil

It is more convenient for me to glue the ends of the spiral with a pencil representative. But for fixing the volume I already use liquid. It's good that when it dries, transparency remains.

Iron ruler

It will be needed for self-cutting tapes from a whole sheet.

Stationery knife or scalpel

It will help to cut smoother strips.

How to make crafts from quilling: a master class for beginners

Simple flower base

Step 1

I twist the tape into a tight roll. I use a wooden toothpick. I pre-split its sharp end with a clerical knife. I insert the tape into the slot and twist it.

Step 1: Using a toothpick, twist the tape tightly

Step 2

I dissolve the spiral to the desired size. Some craftsmen use rulers with round holes to calibrate workpieces. I do it "by eye", compare the subsequent details with the first representative. I fix the outer tail with glue. I prepare all the elements at once.

Step 2. I dissolve the spiral and fix the tail with glue

Step 3

I shape the petals. I like to use the blob preset. Looks great in a floral version. Moreover, regardless of the direction of the acute angle.

Step 3. Make a corner near the petals

Step 4

I create the core. Again, a round particle - tight or loose.

Step 4. Twist the core

Step 4-1. The core can be loose

Step 5

I connect the petals to the middle. I glue each element sequentially.

Step 5. I connect all the details

"Fairy flower"

Add details to the simple shape. We complicate it. Drops of a different color and simple curls.

Step 6. Stages of assembling a flower

Panel with a floral motif

For such work, I needed a sheet with a printed drawing of the graceful representatives of the flora. Found the image on the internet. You can just draw.

Let's print the drawing

Having looked at the workpiece, I picked up a suitable color scheme and started work. I wanted tender blue buds. Elements for flowers and leaves can be used in different ways, in combination they will be most interesting.

Curls - The stems can be curled from strips of corrugated paper (cords).

Step 1

We twist the blanks of the leaves

The element is a free spiral. If the sheet is large, you will need 2 or even 3 parts.

I use different forms. I connect "drop", "eye", "leaf". In this way, in my opinion, you can convey the liveliness of greenery.

Step 1. Making leaves of different shapes

Step 2

The flower parts will also be free spirals of the same size at first.

We give shape.

Step 2. Collect the flower

Step 3

Plant stem

Curls can be done in many ways.

Just run the tape along the contour.
Stick on the paper cord. It is also obtained by twisting. This method is entirely related to the Quilling technique.

Step 3. Twist the stalk

Step 4

Step 4. Add the stem to the painting

To please the children, you can perform the animals using the Quilling technique. Both flat and volumetric characters will amuse. Plain office paper and corrugated cardboard work well for this.

Little mouse

Sharp-nosed cute animal. Mine will be white.

Step 1

I glue several strips into a common tape. I roll it into a tight roll. We need two parts of different sizes. It is not necessary to count the number of pieces of paper. See it by eye to see the difference. For the head, I make the circle a little smaller. The body is of a larger diameter.

Step 1. I roll several strips into rolls of different sizes

Step 2

The head washer is pushed through with your fingers or the sharp end of a pencil. Thus, I pull out the nose. From the inside, it is necessary to coat the part with glue and allow time to dry.

Step 2. I squeeze with my finger and get a nose

Step 3

I cut the ribbons for my idea myself. The size is 210 mm by 5 mm. I only need one for this step. I twist the strip quite tightly, fix it with glue. I do 2 details at once.

Step 4

Mouse heels

Here you need to glue 2 strips into one and wind up a tight spiral. After that, it is necessary to give the shape of a drop. The droplet will turn out to be small and dense.

Step 4.2 twist the strips into a tight spiral and give it the shape of a drop

Step 5

Legs

I wind half of the strip tightly, it turns out the middle part. I make my fingers from 1/6 of a colored paper ribbon. In total, there are 3 of them on each foot.

Step 5. Preparing blanks for handles and legs

Step 6

For the performance of the ears of a mouse, I need 2 stripes of white and pale pink. The two-tone free roll rolls up quite easily. First, I take the colored part, and then sequentially wind a white strip on it. I bend the workpiece in a semicircle using a round object.

Step 6. Twist the ears of two colors

Step 7

We connect the parts of the animal. We glue the ears to the head. Then we glue the upper figure to the body. Between the parts we skip a small strip on which the paws are attached. We glue them, pre-assembled with tweezers, to the handles.

Step 7. Glue the head, ears and torso

Step 8

Let's make a nose, eyes and antennae. These are very small washers. You don't have to look for black paper. I paint white blanks with a helium pen. Mustaches are thin pieces of standard paper.

Step 8. Glue the nose, eyes and antennae

It turned out to be a funny kid. If you wish, you can attach a carabiner, and the product will become a keychain.

Step 1

I twist circles of different colors.

Step 1. Roll up the multi-colored flowers

Step 2

Option 1 : I spread round blanks of insect parts on the prepared drawing.

Step 2. Put all the details on the drawing

Option 2 - I give the necessary shape to the elements from which I will assemble the winged beauty.

Step 3

Elements can be connected by a group. To do this, I paste over them with a continuous tape around the perimeter. Don't forget to shape the wing.

Step 4

We make the torso and head.

Here again I suggest 2 variations

Twisted cord (this type is suitable if your work will be placed on a plane).
Volumetric detail. We get it from a tight spiral elongated in length.

The head is a tight roll.

Step 5

Collecting a butterfly

The wings must be glued to the thin body.

Step 5. We glue all the details

Step 6

Every beauty has a mustache. We obtain them using the open V-form.

Step 6. Add antennae

As you can see, doing quilling, you can show a flight of imagination. It is not at all necessary to follow the given instructions. It all depends only on your desire.

As soon as you twist a straight strip, you will see how the paper ribbon reveals its subtlety and beauty.

You will have a desire to create and delight those around you with openwork decorative elements,.

Products made from rolled paper strips are called quilling or paper filigree. Even a senior preschooler can master this art. Now on the Internet you can find a lot of schemes for creating flowers, landscapes, postcards, jewelry, paintings, topiary, crafts, panels and other products in this technique. How to make quilling for beginners - we will consider in the article.

What is needed for paper rolling?

In a special store you can buy paper, scissors, tools for paper filigree, tweezers, forms for rolls, PVA glue, awl. Quilling paper, in comparison with colored paper, has 3 positive points:

the required density, keeping the shape of the parts;
ready-made strips from 1 mm to 3 cm;
high-quality painting even on side sections.

Specialty paper saves time, but craft strips can be made from two-tone office paper using a metal ruler and cutter.

The tool is a kind of awl with a fork-shaped tip. It can be made from improvised material:

cut off the sharp end from a toothpick and cut in the middle, making a kind of fork;
using the analogy described above, make an incision in the shaft of an ordinary handle;
stick the needle with the point into a tree or cork, and file the eyelet.

Use sharp scissors with straight ends. A ruler with circles of different diameters can be used as a mold for rolls. If you choose a volumetric quilling, then you will need an available material (beads, beads, wire, skewers, cardboard, frames, a scallop, a pin, etc.). We figured out the tools, now we will study the basics of paper rolling.

Quilling: master class of basic elements

Insert a strip into the slot of the tool and start twisting it into a spiral, which is called a roll. It is from this element, under a certain pressure, that we form certain forms:

Quilling: diagrams of basic elements

Quilling elements:

The rectangle is the eye that shrinks in opposite directions and then the right angles are aligned. The square is made in the same way.
A rhombus is an eye whose corners are squeezed in opposite directions.
A star is a rhombus whose sides bend inward.
A semicircle is a free roll, at which opposite ends are pinched, and then the space is straightened into a semicircle.
A crescent is a semicircle in which the base bends inward.
The leaf is an eye that is pressed in the corners, but volume is created in the middle.
A wave is a leaf whose sides are curved in different directions.
The turret is a triangle with a short base and long sides.
A cone is a tight roll with a glued end, which is then pressed like a bun.
A spiral curl is a twisted strip.
Horns are a strip folded in half and individually twisted into a spiral.
A curl is a straight strip, the ends of which are twisted into a spiral in different directions.

Unusual elements for flowers

In this case, there are also secrets:

Create a Filigree Postcard

Now it becomes clear how to make quilling, that is, from the main elements you create different compositions for postcards and even paintings. As a basis, you can take a pattern of a finished work or a diagram from a magazine. But you can make the blank yourself. Just draw a sketch of a butterfly on the front side of the postcard and glue the elements on them.

For example, in the lower left corner of the postcard, we will draw a bouquet of daisies with curls and leaves. We make the petals from a drop of white, we make the core either shaggy yellow, or from a tight roll. Chamomile can be made whole (it is in the variety of ways that quilling is unique). A master class for making a flower with petals and a middle is presented as follows:

take a white strip 1.5 cm wide and 30 cm long;
make cuts along the entire length with a width of 1-2 mm, leaving 3-5 mm on top;
glue on the reverse side a yellow strip 3-5 mm wide and 15 cm long;
insert the yellow strip into the tool and twist a tight roll;
glue the edge to the flower;
gently spread the petals in different directions with your fingers.

Postcard decoration

We continue to talk about how to make quilling and postcards in this style. Glue different daisies to the base. To resize, simply grab strips of different widths. Now glue the stem to the flowers - a strip in an upright position. And to it you attach the leaves made using the technique of leaves, waves and arrows. Along the hem, you can decorate with curls, twigs and horns.

To make the card proportional, in the opposite corner, glue a butterfly, whose wings are made of an arrow and a drop, the body is made of the eye, and the antennae are made of horns. Volumetric postcards especially attract attention. This is also a quilling. How to make voluminous flowers:

Another way to make volumetric flowers:

cut a circle out of paper that will determine the size of the flower;
bend the circle into 4 parts (you get a funnel);
glue the petals on the concave side, leaving the middle;
also process the wrong side of the funnel;
now make a tight roll, to the edge of which you glue a strip with notches;
straighten the core and glue it to the middle of the funnel from the concave side.

Paper roll style tree

In this technique, it is interesting to make a tree. Quilling allows you to make it in a flat and three-dimensional form. In the first version, we glue a tree or trees on a sheet of paper:

All that remains is to frame a tree. Quilling offers another craft option:

Make shaggy daisies.
You also make leaves, only take the tape longer to form fluffy balls.
Take a small yogurt pot or glass and decorate it.
Insert the trunk into which you decorate with green paper. For these purposes, a wooden skewer or thick wire is suitable.
Glue paper blanks to the ball.
Pour gypsum mortar into a glass, install the barrel and let it harden.
Decorate the top of the pot with paper grass or satin ribbons.

You can decorate the tree if needed. Quilling allows you to make butterflies, spiders, birds that can be placed on the crown.

How to make voluminous flowers

This technique can be used to make ordinary flowers that can be placed in a vase. Let's see how to make gerberas:

We collect a bouquet

We continue the conversation about how to make quilling and volumetric flowers using this technique.

Bend the funnel on the back side a little.
From the green strip, make a tight roll with a diameter of 3 cm and form a cone from it.
Make a stem from a skewer, wrapping it in green paper.
Insert the stem into the cone and glue it to the seamy side of the funnel.
Now make a crescent from free rolls with a diameter of 2 cm.
From 7 crescents, make a herringbone-shaped sheet and glue them together.
Attach the petiole to the lower leaves in two folds and glue to the stem.
Make a spiral curl and decorate the joint.

Also, by analogy, make a whole bouquet. This is why quilling is unique. With your own hands, according to this scheme, you can make different cornflowers, asters, whose petals can be bent with scissors.

Rolling paper is amazing creativity. Try to make simple elements and then move on to complex masterpieces - landscapes, paintings, portraits, voluminous crafts. This is an unusual style! Quilling can be taken as a basis for making panels for photo frames, where curls, horns, branches are made of cardboard, which is then decorated with wood or metal. Try to make artworks using this technique, and you will not remain indifferent.

For beginners

What is quilling? The art of making beauty out of twisted paper strips.

Quilling is, in other words, paper rolling. Or, as it is also called, paper filigree. Its meaning lies in the fact that compositions are made of twisted long paper strips, which have been given a certain shape. For example, they can serve as a picture or decoration on a postcard. There are several basic forms used in quilling, although nothing limits the imagination of the master. But first things first.

Materials and tools.
What is needed for all this?
Stripes. Where can I get them?
The first way: cut from colored double-sided paper (office or origami). IMPORTANT: the paper should not be very thin (have a low density), because twisted may not hold its shape very well. The width of the stripes varies from 1 mm to several centimeters. The usual width is 3-5 mm.
Second way: buy in specialized stores. The strips are sold already pre-cut and have a suitable density.

Twisting tool. It is needed to smoothly and conveniently twist the strips. Again, there are several ways to get it:

First way: let's take an ordinary toothpick. Cut off the narrow part at one end:

On the remaining blunt part, make an incision of about 5 mm, for example, with a clerical knife:

The tool is ready.

Second way: take a rod from a ballpoint pen. Better used, so that goodness in the form of ink is not wasted in vain. Why not gel? Because the radius of its rod is large enough, which is not good. So, we took the rod and do the same manipulations with it as with the intended toothpick. It turns out like this:

Ready for use.

Third way: buy in the store.

Glue. PVA from a bookstore is best suited for quilling purposes. In some cases, a glue stick is needed.

Base paper. The one on which we will glue our twisted beauty. Both plain paper and cardboard are suitable. It all depends on the product we make.

Scissors. It is most convenient to use small scissors with fine, sharp tips.

Tweezers. An optional tool. Needed in order to hold curls, it is convenient to glue or apply glue. You can find it at a pharmacy or a store.

Paper-rolling technique and basic forms.

We take the tool and the strip, insert the tip of the strip into the slot of the tool and start winding it, creating a uniform tension:

Now carefully remove the rolled strip from the tool. What happened is called a roll or spiral. If at this stage we glue the tip, then we get one of the shapes - a tight roll (tight spiral). But the most basic element in quilling is a free roll (free spiral). It turns out when we do not glue the tip of a tight spiral at once, but let the paper unwind to the desired degree, and only after that we fix the end. It is from this figure that a wide range of other shapes are obtained. Such forms are called closed forms. Let's take a look at some of them. Let me remind you that everyone has fixed ends.

A drop: move the center of the free spiral to one side, squeeze the other with two fingers and release.

Triangle: make a drop, and then flatten the rounded part so that it becomes straight.

Arrow: we make a triangle, after which we press the middle of its base inward.

Eye (leaf): squeeze the free spiral on both sides simultaneously and release it.

Rectangle: We make a sheet, and then squeeze the two remaining sides in the same way.

Align the corners.

Semicircle: We pinch two areas of the free spiral and straighten the space between them on one side.

Crescent: make a semicircle, then push through the middle of the straight area.

Now let's talk about the shapes that are not obtained from the basic shape and are called free. Let's consider a few. I draw your attention to the fact that we do not fix the ends with glue anywhere.

Horns: take a strip, fold it in half, and twist each half outward in opposite directions.

Curl: without bending the strip, we twist one half of it in one direction, and the other in the other.

Twig: fold the strip in a ratio of about 2 to 1 and twist both parts to one side.

Heart: bend the strip in half and twist each half inward.

That's all. Success in quilling :)

Here's an example of a postcard made using this technique:

Quilling basics. Manufacturing of the main elements (photo):