Incidents 

Crochet lace band with elastic fastening. For the bandage you will need

An alternative to a hat is a knitting headband. There are women who categorically do not like to wear hats, firstly, they do not suit everyone, and secondly, the hat spoils the hairstyle, it is hot in it, and so on. A knitted headband is another matter entirely. Let's tie stylish and eye-popping headbands for women, models featured in fall / winter 2018/19 magazines. Description diagrams are attached.

An interesting headband with braids associated with an overlap, a shawl and mitts - all this makes up the "Winter Cold" set. For knitting you need threads - wool and polyamide - 3 skeins. This turban headband has an interesting pattern, the diagram is attached. The size of this original headband is 54-56 cm. Designed by Drops Design.

The shawl will turn out to be 37 cm high and 129 - wide. Mitts size: S, M, L. At the bottom, the circumference of the mitts will be: 15.5, 17, 18 cm. Above - 17.5, 18 and 19 cm. The length of the mitts is 15.5, 16, 17 cm.
Abbreviations: Loop - p., Row - p., Front loop - persons. p., purl - worn out., yarn - nak.

The knitting density is:

  • 19 p. / 38 p. = 10/10 cm. - 4.5 mm needles. (it is more convenient to knit a shawl on circular ones).
  • 21 p. / 28 p. = 10/10 cm - on needles 4 mm thick, garter stitch.
  • 21 p. / 42 p. - on needles 3.5 mm thick.

The yarn is used: Drops Sky number 08 (74% alpaca, half-mid, wool) - 50 g / 190 m
If you have not bought this particular yarn - pay attention to the thickness of the thread! How to replace one yarn with another? Take the needles of the thickness indicated in microns, for example - 3.5 mm. And knit a 10/10 cm "probe". Then see how many rows and loops you have in the "probe". And, based on this, add or subtract the thickness of the yarn (in 1,2,3 threads).

We knit on needles 4 mm thick. Cast on 51 sts (product width), and knit 1 row worn out. The next p. - front. We knit it according to the scheme A.-1, plus 1 edge p. On both sides. We look at the pattern:

So knit according to the scheme of repetition of 4 rows. We measure it with a centimeter of 21 cm. It is advisable to tie it to the end of the circuit. We put on the last 25 sts of the row for extra. knitting needle and leave on the additional knitting needle. In the meantime, we will work with the first knitting needle, it has 26 sts.

We knit according to the same scheme A.1, only at the end of the river. we collect 1 p., - on the first knitting needle we have 27 p. So we knit 16 p. (4 repetitions of the scheme), in the last p. afterbirth. item knit 2 items together. Do not touch the first knitting needle yet - leave it as it is. Hinges with add. We transfer the knitting needles to the second knitting needle, add p at the beginning and end. on 1 p. On the second spoke 27 p. Perform again 16 p. schemes, in the last. R. close at the beginning and at the end of 2 p. together. Remaining 25 p.

Then we will do before overlapping. There is nothing complicated: put the first knitting needle on the second, remove the stitch from the first knitting needle. As a result, we should have one spoke. That is, we again have 51 sts on the spoke. We mark this place with a marker or a pin. We must knit another 21 cm from the marker according to the scheme A. 1. Then another 1 out. R. and close all the loops. Sew the knitted edges of the bandage with a needle with a native thread.

The shawl is knitted with a garter stitch (one person. R.) with a pattern in the middle. On needles 4.5 mm thick. we collect 15 p.

1st front p .: 1 person., Nak., 2 persons., Nak., Scheme A.2 (9 p.), Nak., 2 persons., Nak., 1 person. - that is, in this p. we added 4 p. = 19 p.
2nd p .: 1 person., Nak., 4 persons., 9 p. Scheme A.2, 4 persons., Nak., Persons. added 2 p. = 21 p.
3rd p .: 1 person., Nak., Persons., 9 p. Scheme A.2, 9 p. Scheme A.2, nak., 3 persons., - in this p. added 4 p. = 25 p.
4th p .:
Next, repeat the 2nd and 3rd p. to a height of 36 cm. That is, in the 4th p. you need to add 2 points, in the 5th - 4 points, and so on. At a height of 36 cm, close p. Persons.

Mitts

On needles 3.5 mm thick. Sizes S; M; L. We collect 35/39/41 sts and knit: 13/15/16 sts with one facial, according to scheme A.2, and again 13/15/16 persons. Next, knit to a height of 10/11/12 cm.Add 1 st at the beginning and end of the river, you get 37/41/43 sts. Then work up to 15/16/17 cm from the beginning of knitting, close all sts. like persons. Sew using the long remaining tail of the thread. We knit the other mitt symmetrically to the first one.

Before tying the headband, we decide on its thickness. We need a warm bandage for a woman's bandage, such as a turban or turban - which means that yarn should be chosen with wool, or with mohair, or with alpaca.

In this work for knitting we use Drops Merino Extra Fine yarn from Garnstudio, number 01. Yarn - 100% wool, 50 g / 105 m, 1 skein.

Needles 4 mm thick. The size of the head is 56-58 cm.The height of the bandage is 10 cm, its length is about 52 cm.

Knitting density: 21 p. / 28 p. persons. stitch - 10/10 cm.

Knitting density: 21 p. X 28 p. front satin stitch = 10 cm x 10 cm.

Pattern scheme:

How to knit a headband:

We knit in pivoting rows and sew on the back with a needle and native thread.

Cast on needles 4 mm thick. 30 p. And perform 1 out. R.

2nd p .: we knit according to the scheme A.1 (repeat the rapport 6 times), it turned out 30 p. + 6 p. Not knitted (black cage).

3rd p: now we knit all p., And we get 36 p.

Further, after we have completely knitted pattern A.1, we knit pattern A.2. We continue to work with pattern A. 2 for another 26 cm, then we need to make an overlap in the middle of the work: transfer the first 18 sts to the auxiliary joint, knit the next one. 18 p., And then - 18 p. With auxiliary. knitting needles. We work further according to scheme A.2. until the length of the bandage reaches 48-49 cm. Next, knit according to pattern A.3. After you have completely knitted pattern A.3, you should have 30 stitches left. We knit the last p. persons., all items are closed. Sew both parts of the bandage with a needle.

On the video - knitting a headband "Bow":

Headband with braid pattern

Bandage size 55-56 cm

The usual pattern of this pattern is used in scarves, hats, and so on. Try it first on a probe - it will be easier for you to knit the product itself.

For the bandage, you will need 1 skein of Lana Gold yarn (50% wool, 50% acrylic, 240 g / 100 g. Knitting density - 17 p. / 22 p. = 10/10 cm. Needles 6 mm thick., 1 auxiliary knitting needle , 2 small auxiliary knitting needles, thick needle.

Cast on 30 sts on 6 mm needles. We begin to knit with braid according to scheme 1:

After the 8th p. knit again 1st row. And so on until we knit 23 cm. We finish in the 6th out. R. Schemes 1. Next - there will be a division of knitting into 2 parts. Starting from the 7th p. we knit the first part of the strip according to scheme 2. Repeat 8 rows 3 times. We transfer the item to the auxiliary knitting needle.

Return to the abandoned lane. We attach the thread and we carry out the second strip according to the scheme 3. We knit according to the scheme 3 - three repetitions.

Then we combine both knitting needles into one and knit according to scheme 4, starting from the 3rd row, until we knit 23 cm.You can close all the loops and sew the edges, or you can not close the stitches, but connect the beginning and end of knitting with a knitted or crocheted stitch ...

Knitted headbands for a woman or a girl are simple yarn products. They will both warm you in cold weather and give an unusual look to your hairstyle, keeping it in any weather.

After watching the video tutorials, you will learn how to knit a headband with knitting needles, and if you have mastered this knitting technique at least a little, it will not be difficult for you to make your wardrobe more diverse.

Headbands are different - wide and narrow, monochromatic and variegated, they can be matched to any of your clothes, for walks and for business meetings. And if you buy new clothes, quickly making yourself a fashionable piece of jewelry that suits it will be easy and will take very little time. Consider how different types of dressings are knitted.

p.s In the last article, we looked at how to crochet a bandage

The overlap in this one-color dressing is ensured by the fact that the dressing is divided by a slit into two separate elements, which are made to overlap with each other. The size of the bandage is adjusted according to the circumference of the head. The dimensions of the crossing elements are optional. In order for the bandage to fit snugly on the head, the sides must be slightly reduced.

The number of loops depends on the density of the yarn and the knitting density. Knitting is done not in a circle, but in rows with classic front and back loops.

By alternating knit loops with purl loops, we get a typical elastic structure.

Video lesson:

The not too wide band is made of yarn, in which mohair and acrylic are combined approximately equally. Knitting is a classic 2 x 2 elastic band with alternating front and back loops. To get two separate strips on the bandage, divide an even number of loops in half. This will require a third knitting needle, but half of the loops can simply be pinned off.

When both stripes are knitted, they cross, and then knitting continues with a regular elastic band. Both ends of the dressing are connected to each other with a thread threaded through the outer loops with a crochet hook.

Video lesson:

The width of the bandage is the same everywhere, the length depends on the girth of the head and is selected individually. The bandage is knitted in the transverse direction, and its edges are made with garter stitch, and a pattern is formed in the center in the form of plaits woven into a braid. This pattern spans the entire length of the dressing, and the beginning and end are connected by a seam that is worn back. Garter stitch, viewed vertically, resembles an elastic band in structure.

The sample used yarn, which includes wool, acrylic and nylon, its density is 100 grams per 200 meters. The spokes were 4mm.

Video lesson:

A beautiful and warm one-color bandage is designed for a time when it is already hot to walk in hats, and cool with an open head. A garter stitch is used along the edges of the bandage, and a braid is created in the center of two intersecting plaits with bumps in each link. To form this pattern, you will need to use an additional knitting needle.

The knitting pattern is not so complicated, but it is necessary to maintain the order of the loops, constantly checking the description in order to get all the weaves and bumps of the pattern. At the end, the dressing is closed, connected with a thread of yarn using a needle with a wide eye.

Video lesson:

Such a knitted headband is made single, so that in severe frost and wind it does not make sense to wear it, but it will cover your ears from a strong wind. The bandage itself, made according to the garter stitch pattern, is a flat cloth, connected into a ring with the same thread using a needle with a wide eye. For decoration, another strip is knitted, which has a shorter length than the doubled width of the bandage.

It is covered with a bandage in the area of ​​the connecting seam. This strip creates beautiful folds on the headband. The edges of the strip are also connected with a thread and a needle - and the bandage is ready. Very simple and beautiful.

Video lesson:

The band is 8 centimeters wide and tied to fit the head. Garter stitch is used along the edges of the band, and in the middle part there is a "stars" pattern. The bandage, which is easy to make, looks quite interesting. The material of the bandage is a yarn consisting of cotton with the addition of acrylic, the needles are used a little lower than the recommended number.

A crochet hook is used as an auxiliary tool. The pattern is formed over four rows and then repeated over the entire length of the bandage. The ends of the bandage are sewn together in such a way that the seam is completely invisible.

Video lesson:

We offer a master class on knitting a bandage with knitting needles smaller than recommended, so that the knitting is tight and protects well from the cold. First of all, a bow is knitted. Its petals are knitted with gradual expansion and then taper. It turns out a symmetrical element with a small width in the middle for bandaging.

Next, the bandage itself is knitted with a simple pattern, and then the same bow element is repeated. The ends of the bandage are tied in a knot, after which a nice bow is formed on it. Such a bandage in its style is more in line with children's fashion - it is quite suitable for any child.

Video lesson:

A bandage scheme is preliminarily drawn up, based on the required size for the head. The dressing is knitted without a seam using circular knitting needles. On the bandage we get a "putanka" pattern, for which a detailed scheme of its formation is given.

The headband is knitted from pure merino wool. The dressing is made in the form of a tube, so it turns out to be two-layer, warm. The ends of this "pipe" are connected with each other with a needle and thread, after which the seam is covered by a bridge previously tied from the same yarn. The ends of the lintel are sewn together, and no seams are visible. You can decorate the headband with beads.

Video lesson:

The pattern used for the bandage is simple enough to knit, and even a beginner can start creating it. The edges of the band are knitted with garter knitting, and an additional knitting needle is used to create the braid. How to form a beautiful and embossed pattern is shown in full detail. It turns out a canvas with slits, the edges of which are subsequently intertwined with each other, forming a braid, beautiful and voluminous.

This technique can be used for scarves, sweaters, and other warm items. It remains to connect the ends of the bandage to fix the pattern and get a finished product that will decorate your clothes.

Video lesson:

The warm bandage is tied in two strands, so it warms the head well. In the center of the bandage there is a pigtail, changing its direction in the center of the bandage, then two purl loops are tied separating the braid, and two twisted flagella located closer to the edges of the bandage. The edges themselves are made with garter stitch.

Knitting braids and plaits requires just one criss-cross in six rows, so this intricate-looking pattern can be done even by beginners. The sample used very soft yarn and knitting needles with a diameter of 3.5 mm. The connection of the ends of the dressing is done with a needle and thread and is completely invisible.

Video lesson:

At the shows of collections in 2018, a real sensation was made by accessories for the head, which complemented all fashionable bows. The headband fits into any stylistic ensembles.

Knitted head jewelry quickly gained popularity, and for desperate fashionistas they have become a must-have in wardrobes. Due to its versatility, the headband gradually becomes higher than some style.

The knitted headband has no age limits. It can be worn by a girl, teenager, girl, woman or an elderly lady. And children's knitted openwork headbands are worn on the head even for newborns.

In summer, they are useful for fixing or decorating hair. In the cold season, a bandage is an alternative to thick hats. The latter can ruin a beautiful hairstyle. In order to be “in touch”, that is, to be in line with fashion trends, it is not necessary to buy a headband from expensive brands. You can make a stylish knitted product with your own hands.

Summer options for headbands are made of thin thread. In autumn and winter, warmed models, knitted or crocheted, look organically with clothes. This article provides different techniques for creating fashionable headbands, describes in detail how to understand the diagrams, and step-by-step instructions are attached.

Children are superbly festive
photo set
bright image


There are simple knitting techniques for beginners that even a beginner can handle. For a needlewoman with skills, more complex ways of doing it will be interesting. This designer knitted headband is an exclusive, one-of-a-kind item that is not available on the mass market.

A well-chosen shape, color, original decor, adherence to recommendations and your desire are the key to the success of handmade work.

Matching yarn for headbands

The style of the future knitted product on the head depends on the composition, texture and thickness of the threads. The denser they are, the more prominent and voluminous the result will be. A combination yarn is suitable for a warm bandage, the same as for scarves, mittens or hats.

Brand names.

  1. Bouclated.
  2. Winter.
  3. Rovnitsa.
  4. Thin.
  5. Pehorskaya.
  6. Semenovskaya.
  7. Children's.
  8. Tweed and others.

Usually, for a headband, they take yarn containing at least 30-40% natural fibers from the following types of wool:

  • alpaca;
  • merino;
  • camel;
  • angora;
  • mohair;
  • cashmere;
  • kangaroo;
  • down - goat, rabbit, mink, yak;
  • additives - various types of acrylic, sequin, polyester, elastane, microfiber.

The optimal thickness is 250-300 m / 100 g, the density of the thread is less than 100 m / 100 g will make the knitted bandage coarse. This result is not needed. Thin headbands are made of knitted or summer yarn from cotton, bamboo, linen and viscose.

How to read patterns and patterns

Novice needlewomen, seeing a table with symbols, may think that they are in front of the Chinese alphabet. Dealing with the symbolism is not difficult. The description of a knitted figured pattern or ornament for a headband takes a lot of time, usually these are large texts. They are inconvenient to read and easily confused.

To save energy and ease of understanding, it is customary to make knitted patterns in patterns, where each loop has its own designation.

Abbreviations are marked like this:

  • lp - front;
  • un - worn out;
  • p - loop;
  • nk - cap;
  • cr - edging;
  • p - row;
  • cpl - crossed lp;
  • vulture - crossed SP.

It is customary to read tables from left to right and from bottom to top, similar to the position of the canvas in front of you. All front - odd numbers of the rows need to be knitted according to the pattern, purl - even numbers are made according to the pattern. That is, if LP is indicated in the table on the main side of the pattern, then PI is automatically knitted with the reverse.

In a complex technique, all loops can be prescribed, not excluding the wrong side. Each diagram is indicated by arrows or frames. This is a rapport - a repeating number of stitches that make up part of the pattern.

Let's consider an example:


Note that each diagram is accompanied by a legend for ease of reading. The rapport is highlighted with a frame, it can be repeated several times, but the number must be a multiple of the number of loops.

It can be seen from this table that its height is 16 rows, and its width is 12 points + 5 additional ones included in the design of the pattern. Apart from the indicated number in the scheme, you need to dial more by 2 points, which will be edging.

Let's start with an easy one - the simplest dressings

When purchasing yarn, check the softness of the fiber. Spiky headbands can chafe your forehead, causing discomfort when worn. The most elementary way for beginners is to knit with an elastic band with an overlap in the center. This is the alternate knitting of the front and back loops. Any proportions: 1x1, 2x2, 3x3 or 2x1, 3x2, etc.

The larger the gap, the more pronounced the pattern of the English elastic band on the headband. Detailed description of the work.

  1. You need to start by measuring the circumference of the head (OG).
  2. For example, the exhaust gas will be 54 cm.
  3. For registration of an overlap, 10 cm is enough.
  4. This means that 54 - 10 = 44 cm. Subtract another 4 cm so that the bandage fits snugly on the head. Remains 40 cm, we divide them in half. For each part of the canvas, you need 20 cm.
  5. An average bandage width of 10 cm is 26 loops + 2 hem = 28.
  6. Knit 20 cm with an elastic band.
  7. Divide the number in half, 28/2 = 14.
  8. Put one half on a pin, knit the other with an elastic band 10 cm and fasten.
  9. Repeat on the unconnected side.
  10. Cross two strips, put the loops on one knitting needle, knit the remaining 20 cm.
  11. Take a needle, pick up such an eyelet so that you can freely insert a thick thread. Sew the two edges with a blind stitch.
  12. The product can be decorated with an original brooch, decorated with pebbles, beads or pearls.

Headbands for women

Arans, rice, braids, boucle, jacquard, spirals or plaits are all different knitting techniques. Many needlewomen believe that crocheting is more suitable for openwork cotton models. There are a lot of interesting and simple methods on how to sew a summer headband with your own hands. Experienced craftswomen describe their technology.

From thick yarn, you can knit a voluminous beautiful boho-chic headband, which is suitable for tall, stately women.

Little tricks.

  1. The length of the yarn and the thickness of the knitting needles for the bandage should be in accordance with the instructions used.
  2. There are usually several sizes indicated in the table, immediately mark the ones that apply to you with a marker.
  3. Do not be lazy to make a small knitted pattern 10x10 cm, cut out a similar pattern from cardboard. Compare the two parts for a match, this will allow you to select the knit density or the number of knitting needles.
  4. Start with simple techniques, after mastering them, move on to more complex patterns.
  5. For a knitted seamless headband, use circular knitting needles.
  6. Cotton yarn is pre-washed at the maximum permissible water temperature so that it shrinks.
  7. The rubber knitting needles come in handy to keep the loops from slipping.
  8. It is not necessary to introduce a complex pattern into a knitted product made in the cross-section technique. The constant change in the number of loops will inevitably lead to a displacement of the rapport.
  9. It is better to take the working (auxiliary) knitting needle half the number smaller than the main one.

Below are the schemes by which you can make beautiful headbands in different styles. Fashion accessories of the author's handwork on the Domestic website are shown in the photo.


Excellent festive
set is unusual
vivid image photo

Knitted headbands with needles with a description

Many women often face a problem when a child refuses to wear a hat. Girls can refer to discomfort, that the head itches, hair gets tangled, there are many reasons.

A good and practically the only way out is a knitted fashionable warm headband. Even if you have never held knitting needles in your hands, you just need to follow the recommendations for the execution technique. In the off-season, a good option would be to knit a headband for a girl made of acrylic, in winter - made of wool.

Schemes for creating beautiful knitted headwear.

With pebbles.

  1. We make a headband for girls from 6-12 years old.
  2. Table based on 56 cm OG, 35 g of yarn, needles No. 3.
  3. Shawl technique - on the one hand, all facial, on the other - purl.
  4. Cast on 35 stitches, work 105 rows.
  5. Sew the edges, pull tight with a thread of the same color. The bandage around the seam is done tightly in several turns.
  6. Sew a knitted headband with rhinestones, stones or sequins.
  1. Making a bandage for a girl under 2 years old.
  2. At the rate of 46 cm OG, straight needles No. 3 or a hook, cotton yarn with acrylic 30 g + decor with a beautiful flower.
  3. A circular knitting is performed, which begins with a set of 100 loops.
  4. Perform the rows. The first - 3 lp (front) + 1 n (yarn) + 3 p in 1 lp + 1n. The third - 1 n + 3 p in 1 lp + 1 n + 3 lp, the second and fourth - all purl.
  5. Repeat the rapport until you reach 5 cm.
  6. Close the loops, sew one large or many knitted miniature flowers.

Knitted headband patterns for women with step by step instructions

Most of the technical execution charts can be used equally for girls and adults. Master class with a detailed description of the work.

  1. Yarn - 170 m / 50 g wool 55% + acrylic 45% in three different pastel colors, for example, soft pink + white + gray, needles No. 3.
  2. Cast on 15 loops of thread of the same color, knit 25 cm, technique - 1x1 elastic.
  3. Repeat with yarn of other colors.
  4. Weave a braid from the three strips obtained.
  5. Sew each edge in color.

Knitted headbands

Regardless of the chosen devices - you are going to make the product with knitting needles or crochet, a bandage is intended for girls or an adult, an important detail must be taken into account.

When working with schemes + looking at the author's examples in the photo, you must understand how the result will look like. If some designation or detail in the table is not clear, it is better to choose another option. There is a risk that a distorted drawing may result.


Baby flower best
kids with beads fashionable
a lot of colors in the kindergarten

Beautiful and fashionable headbands

If you go back a few years, you will notice that it was originally a male accessory. It was worn by football players, tennis players and wrestlers. Gradually, bandages began to appear in the wardrobe of women. And when the fashion for retro 50-60s returned, accessories in the style of pin-up, boho-chic and others became trendy.

The current fashion is so democratic that it allows you to bring any creative ideas to life. The main thing is that the knitted stylish headband is matched to the clothes and creates a complete image. Often, an ordinary elastic band or garter stitch with a brand logo makes knitted stripes more effective than complex patterns in flashy colors.

However, the direction of style does not depend on the execution technique, but on the shape, texture of the fabric or yarn.

Fashion trends 2018:

  • weaving - a classic single braid with a transverse pattern or many narrow bundles, usually made from a thick thread;
  • sports - a tight-fitting elastic strip, which is worn so that bangs or hair do not interfere, can be sewn from jersey or made with knitting needles;
  • headphones - a bezel with fur pom-poms for ear warming;
  • turban - a wide knitted fabric, with overlapping stripes in the center, often decorated with a brooch, you can make two or more links, shift the emphasis to the side;
  • animalistic theme in the style of rabbit band - for girls they make patterns in the form of animal faces. Models with ears of a cat, frog, giraffe, etc. are suitable for all ages;
  • solokha - a knitted fabric with a wire inside, which is fastened by twisting the ends, the soft ends can be tied in a bow on the side or in the front;
  • turban - a strip, pulled together in the center, is often performed in a two-color scale;
  • oversized - knitted volumetric products from three canvases, woven into a braid;
  • openwork - a seamless pattern made of cotton threads, often crocheted;
  • decor - kanzashi (Japanese bow folding technique), buttons, beads, rhinestones, metal or wooden accessories, flowers and other options.


The headband is considered an unusual and stylish headdress that will protect you from wind and cold. The product is easy to knit by yourself, based on many different options. The headband is especially necessary for those who do not want to wear a hat. Any knitter will be able to make such an accessory. Since it is a small strip of canvas, sewn on the side or knitted in a circular manner.

Knitting needles

It starts with the preparation of the tool, the thickness of which affects the density of the web. If the needles are too thin, the bandage will not stretch well. If the needles are thick, the fabric will be too thin. Pins and needles with thread will also come in handy at work.

Due to the large assortment on sale, it will not be difficult to choose the material for making the bandage. The yarn differs in composition, thread thickness and color. It is advisable to use a shade that matches the outerwear. When choosing a material, you need to take into account the time of year. For example, if the accessory is made for the winter period, wool will do. Acrylic headbands can be worn in spring and autumn.

It is not difficult to knit a strip on the head with knitting needles... Diagrams and what the finished dressing looks like can be viewed on the Internet. The product will be decorated with an unusual pattern, you can pin a beautiful brooch. When choosing an accessory, you need to rely not only on your taste, but also take into account the skill in knitting. Complex drawings are within the power of experienced craftswomen.

The bandage is suitable not only for a girl, but also for a woman. A beautiful accessory knitted with garter stitch will keep you warm in cold weather.

A detailed description of how to make a headband will help you make a stylish thing. The finished product can make the look special.

Pigtail

For work, you need a skein of woolen yarn and knitting needles.

With bow

For knitting such a headband with knitting needles pearl pattern used... It is necessary to alternate the front and back loops in the first row. In the second row, the purl is knitted above the front loop, and the front loop is knitted above the purl.

  1. You need to dial ten loops, and make the length equal to the size of the head circumference.
  2. To decorate, tie a piece in the form of a small rectangle, collect it in the middle and fasten it to a bandage.
  3. Sew the ends of the bandage together. You will get a beautiful version of the product.

Turban

This kind of headband with knitting needles for women has an unusual pattern... It can be worn with any classic style coat. The product can be made in two colors. To do this, divide the strip into two parts, each of which will have its own shade. For example, you can combine smoky and gray. It will look best if the shades differ by a couple of tones.

Openwork

The method of making such a bandage is usual, and the knitting is performed with an openwork pattern. Thus, an interesting and extraordinary option is obtained. There are many patterns on the Internet that you can use when knitting a pattern. A more complex pattern requires skill. The work requires care and patience, since it is important to strictly follow the scheme when making the desired pattern. It is easy to ruin the pattern if you accidentally skip the loop.

Simple crochet pattern

The original bandage can be knitted not only on the needles, but also crochet.

This headband will be a great addition to your wardrobe. And even a beginner knitter can knit it, since the pattern is quite simple. The size of the accessory can be adjusted during the knitting process.

For work you need a skein of wool and a hook.

First, dial 10 air loops - this will be the width of the product. The strip is knitted with half-columns, while on each row you need to gain height with an additional air loop. When the strip is tied, you need to close the loops and sew the edges. The finished headband can be decorated with a small piece of fur of the same shade as the yarn.

DIY tied accessory will warm you in the cold season, and you can create it even without a skill. When making a product, it is important to follow the instructions, then you will get an elegant canvas.

Attention, only TODAY!

Don't like to wear hats? Do you want to be always with your hair and worried about blowing your head? There is a way out - to wear a bandage. The most comfortable, extraordinary and unique, will become knitted headband... The proposed version of the bandage can be knitted by any novice craftswoman, no special skill is required, it is enough just to be able to knit the front and back loops.

The yarn for this headband consists of two: green cotton yarn and gray mohair yarn. To create the bandage we will use needles # 4.

Before buying yarn, check it for barbness. Apply to the most sensitive place (neck) and, if you do not experience discomfort, it is pleasant, then feel free to buy.

How to tie a headband for a woman

We collect 30 loops on the knitting needles, in this case we get a bandage with a width of 9 - 10 cm. We must knit the last loop with the purl.

In order to understand how many centimeters you need knit a bandage, first you need to measure your head with a centimeter. In this case, we knit a 56 cm bandage.

So, we need 10 centimeters for the front part, which means we subtract 10 from 56, and divide it in half. We get 23, and we knit them with an elastic band 1: 1.

Now we divide the number of loops in half, in this case we get 15.


We knit in the same pattern, only on fifteen loops, after removing the remaining 15 on a pin.


Having knitted 10 centimeters, we cut the thread, and we knit the remaining 15 loops of the same 10 centimeters.


After we got two identical strips we cross them.


We knit again the remaining distance on one knitting needle for the required length.


In this case, it is 23 centimeters, after which we close the loops, getting a strip. In order to get the bandage, we simply sew the two ends of the bandage with the same threads that were used for knitting.


Bandage related on the needles, it turns out softer than crocheting. But lovers of a crochet can use the same technology to try to crochet with a volumetric knitting. Such a thing will be much warm and, as mentioned, voluminous. The shape of the headgear must be chosen carefully. Any thing can both emphasize the dignity and worsen the appearance.
Especially for the site Needlework lessons olushka070298.