Houses lay the usual caps of Santa Claus, lay and dust without a business. The fabric manilated with its quality and bright color. It was decided to sew a case on a bottle of champagne. Since the time was later, then I did not boost on the sewing machine and wake the neighbors. I did all the work with my hands, namely I made two lines. Yes, yes, so little labor for such a charming Santa Claus, which brings a festive mood not only by its appearance, but also content. I suggest you to try to sew such a cute craft for the new year, and, of course, to introduce kids decoration to the process. After all, they will not be difficult to decorate the fur coat of Santa Claus, better than I did.

Threads.
Scissors.
Needle.
Santa Claus cap.

Sequins and glue for decorating Santa Claus fur coat.

2. Measure the length of the desired fur coat and cut off the top of the cap, as we do not need it.

3. In terms of the volume of the bottle, we cut off the excess part, so.

4. We sew our item, figuratively speaking, it turns out a cap, but smaller and with a slot in the upper part (neck).

5. From the remaining part of the cap cutting 2 parts for Santa Claus cap.

6. Of course, it is desirable to sew a white fur hat, but since all the work was made by hand, without a typewriter, then I did easier.

7. Applied ordinary momenta gel and glued to the lapse of the caps.

8. Litched from the wrong side and slightly dragged the thread to form the top of the caps.

9. Cut 2 long strips from white fabric, imitating fur.

10. Printed one strip from above down, covering the seam. The second strip was allowed to the collar of the fur coat of Frost.

Good day!

In this master class, I will tell you how to decorate champagne for the new year. It will be removable clothes on champagne, stylized under Santa Claus and Snow Maiden.

Earlier, to decorate champagne ribbons, I did clothing for champagne not removable. But I always had a pity that such beauty is intended only for one evening. I wondered how to decorate champagne so that it would be possible to use it every year. You still need to choose such a decoration that never get bored.

And the easiest answer is Santa Claus.

So really! Why not make a removable decoration on a bottle of champagne in the form of Santa Claus?

To decorate champagne, we will need:

• champagne;
• felt red and white color;
• pencil and ruler, lighter, scissors;
• konya Baika red 10 m;
• red ribbon shir. 2.5 cm - 2 m;
• lace, sequins, semi-massive;
• egg from the Kinder for Santa Claus cap;
• glue moment (gel) I work only to them. You can take any other to which you are accustomed.

To begin with, we make the cylinder based on champagne. We take felt 20x30cm., Such a segment of felt is just suitable for champagne. We try on a rectangle on a bottle and glue it, but so that the cylinder is easily dressed and filmed from the bottle. I glued at a satin ribbon jack.

Now we take shoulders: cut the felt vertically before the place where the bottle becomes straight. These strips cut off on the sides on both sides (shown by the black line in the photo) so that the cover turned out to form a bottle.

Here is such a workpiece I got

The most important thing is to make the beautiful shape of the workpiece for the decoration, whatever it would be smooth, easily dress and starred. At first I did from paper, but the bugger remains on the workpiece and they are very clearly visible. Then it is very difficult to hide. I decided to try with the felt and did not lose. The works of course a little more, but it is worth it. The basis turned out to be smooth. Another plus felt, it stretches if you in the process of brave bottle cut a little bit, then together with the felt you can adjust the size.

Start creating design. We begin to wear off the oblique bay our workpiece. Try all the same, do not tighten the plains so that the form can easily be removed.

After glued several strips, you can cut the neck, then we treat it.

Glue I nano in the middle of the oblique bey, so that she glue to the felt, and not to Baik. And it is so unlikely that the glue "crawls" out.

Do everyone carefully, do not hurry, see what your fabrics would be glued slightly above the middle of the previous strip. If you want the strips to be wider, then it is necessary to glue in the middle.

Baika glue to the place where the bottle becomes straight

Why do I like to use oblique beyk? Because it fits well, not "hopping", here with ribbons it is much more difficult to work.

I am glue with the "moment" gel glue, inflicting it all over the strip. Many use titanium glue or its analogues. You already decide with what glue you work more convenient or to which glue, you are accustomed.

The collar is treated with all the same, oblique baker.

And now the most interesting and pleasant - create the image of Santa Claus.

Cut off the strips of a white felt with a width of 2.5 cm. There should be three of them: on the neck, at the bottom and on the front (where they will be buttonholes).

Cut off the strip of lace along the length of the segments of the felt, on before you need two strips of lace, because Oracle will be on both sides. In general, there should be 4 stripes

I first glued the lace to the feta. And then stuck felt on the bottle.

First of all, glue the bottom, then the vertical strip, and then the collar.

This is how Santa Claus's clothing looks at the back.

Cap make from the egg from the kinder. Large half glue the baking, decorated with a strip of white felt and semi-graysin. You can also make a hat from felt it is done simply. We take a segment of a red felt 12x5 cm, the sides are 5 cm. Stitching the vertical of the mustache or glue. The upper cut we collect on the thread and sew a pomponchik from yarn, and without it. Bottom slice decorate a white felt.

Now we make buttons: we glue the sequins in the form of snowflakes, and they are semi-brass. Buttons are ready.

New Year's decoration for Santa Claus champagne is ready.

Well, if Santa Claus is a snow maiden. Just decorate the second champagne bottle in blue color. Let these favorite heroes adorn your New Year's table!

And I, in the end, turned out that Santa Claus and Snow Maiden.

How to decorate champagne for the new year

By the way! At the Snow Maiden, a hat from the egg from the Kinder, and Santa Claus from Fetra.

P.S. If you are looking for how to decorate champagne for a wedding, master class

And also, you can beautifully decorate ribbons not only champagne, but also a bottle of wine. For example, you can make this one.

Gift girlfriend do it yourself

Agree, such a bottle of wine will be an excellent girlfriend or a good friend.

When meeting a new year, Santa Claus must be present in each house. This fabulous character put under the Christmas tree or on the chest of drawers, but thanks to the man-made covers for bottles with champagne, Santa Claus can decorate and a festive table. In this description, you will get acquainted - how clothes are created on the Bottle of Santa Claus, which will most accurately repeat the robe of the well-known character.

To create a New Year's case on a bottle in the form of Santa Claus, you will need:

- Baika red, whose width is 1 cm. This beaker is already released with curved and fixed edges, which is very convenient when winding the bottle;
- A small cut in length in 1 meter of white bay;
- Silver-colored braid for suit finishing;
- scissors;
- Little synthesis. You can use strips from residues whose width is at least 4 cm;
- hot glue (warming pistol and glue rods);
- rhinestones of red;
- Lace element for collar finishing;
- paper.




How is the case on the bottle "Santa Claus" do it yourself (master class with photo)

We proceed to creating a cover. First, turn around the bottle with a white tight sheet of A4 format. It is necessary to glue the edges of the sheet, but so that the glue does not hit the glass, otherwise the case cannot be removed.

By the way, it is also very beautiful in the form of a clothes Santa Claus can be made from satin ribbon.

To give the case of a form that repeats the figure of the bottle, it is necessary to make notches on the upper edge of the sheet and glue them with each other, pressing to the bottle. Again, make sure that the sheet and glass be bonded.




We are taken for creating a Toulup collar. To do this, wrap the neck of the bottle with a white tape and fix its edge to the sheet. To create the visibility of the shoulders and the throat, it is necessary to apply beyk at an angle.




Next, with the help of glue, you will fix the cuts of red, which will be the basis of the New Year's case on Santa Claus champagne. It is necessary to apply several red items before moving the throat of the bottle into a wide part.








Since on the "back" layers of red ribbons are at a high level, rather than on the "chest", it is necessary to add several red stripes that the lower edge of the beaks lay in the same level.











Next, we apply a layer behind a layer of red bay, until we wrap the whole wide part of the bottle.






The back of the cover on the bottle of champagne "Santa Claus" will again be less attached by the bay, rather than the front, so you need to add a few red flaps to compare the level.









The bottom of the cover is placed by a white satin sackcloth.



In the next stage, we carry out the jewelry of Tulupa with Sintepsum, which is in this case the imitation of artificial fur.
By the way, if you want to make a bottle even more original, then hang on her neck, learn how you can on our website.

The first strip is covered on the bottom of the cover, it will just close the place of transitions of red in white.




Next, apply a cut from "fur" to that part where the buttons should be at Tulupa.




Now proceed to creating a collar of white fur. Close this part of the syntheps at an angle, repeating the outline of the cutout on the New Year's case. Create sharp weapons on the collar can be using scissors.



When segments of a synthet board are pasted, we take for silver finish.







Along the line of artificial fur, skid silver weaving, make neat bends in the corners.








Further, on the central part of the collar, you need to stick the pattern from the lace, it will mimic the chic touloo fastener.




To impart brightness by the New Year's case on champagne in the form of Santa Claus, the whole artificial fur need to re-establish red rhinestones.








At the last stage - tie the cover with a silver braid in the place where the belt is worn.






Still Santa Claus lacks the caps that dress on the bottle tube. Create a cap from a white sheet by the type of cylinder gluing. Size Sample the bottle neck.



Close the top of the caps with red matter, it can be fixed with glue. Then, on the top edge of the caps, lock the cut of the red bay.



The remaining places on the caps are closed by syntheps. The hat is also decorated with rhinestones.



Case on the bottle of "Santa Claus" with his own hands, the master class on the manufacture of which, though volumetric, but understandable, will allow you to make a new year's meeting even more fun and memorable.
And also we advise you to find out, more

When meeting a new year, Santa Claus must be present in each house. This fabulous character put under the Christmas tree or on the chest of drawers, but thanks to the man-made covers for bottles with champagne, Santa Claus can decorate and a festive table. In this description, you will get acquainted - how clothes are created on the Bottle of Santa Claus, which will most accurately repeat the robe of the well-known character.

To create a New Year's case on a bottle in the form of Santa Claus you will need:

Baika red, whose width is 1 cm. This beaker is already released with curved and fixed edges, which is very convenient when winding the bottle;
- A small cut in length in 1 meter of white bay;
- Silver-colored braid for suit finishing;
- scissors;
- Little synthesis. You can use strips from residues whose width is at least 4 cm;
- hot glue (warming pistol and glue rods);
- rhinestones of red;
- Lace element for collar finishing;
- paper.

How is the case on the bottle "Santa Claus" do it yourself (master class with photo)

We proceed to creating a cover. First, turn around the bottle with a white tight sheet of A4 format. It is necessary to glue the edges of the sheet, but so that the glue does not hit the glass, otherwise the case cannot be removed.
By the way, also very beautifulcase on champagne In the form of clothes, Santa Claus can be made of satin ribbon.

To give the case of a form that repeats the figure of the bottle, it is necessary to make notches on the upper edge of the sheet and glue them with each other, pressing to the bottle. Again, make sure that the sheet and glass be bonded.

We are taken for creating a Toulup collar. To do this, wrap the neck of the bottle with a white tape and fix its edge to the sheet. To create the visibility of the shoulders and the throat, it is necessary to apply beyk at an angle.

Next, with the help of glue, you will fix the cuts of red, which will be the basis of the New Year's case on Santa Claus champagne. It is necessary to apply several red items before moving the throat of the bottle into a wide part.

Since on the "back" layers of red ribbons are at a high level, rather than on the "chest", it is necessary to add several red stripes that the lower edge of the beaks lay in the same level.

The back of the cover on the bottle of champagne "Santa Claus" will again be less attached by the bay, rather than the front, so you need to add a few red flaps to compare the level.

The bottom of the cover is placed by a white satin sackcloth.

In the next stage, we carry out the jewelry of Tulupa with Sintepsum, which is in this case the imitation of artificial fur.
By the way, if you want to make a bottle even more original, then hang on her neckfelt sheep , learn to make you can on our website.

The first strip is covered on the bottom of the cover, it will just close the place of transitions of red in white.

Now proceed to creating a collar of white fur. Close this part of the syntheps at an angle, repeating the outline of the cutout on the New Year's case. Create sharp weapons on the collar can be using scissors.

When segments of a synthet board are pasted, we take for silver finish.

Along the line of artificial fur, skid silver weaving, make neat bends in the corners.

To impart brightness by the New Year's case on champagne in the form of Santa Claus, the whole artificial fur need to re-establish red rhinestones.

At the last stage - tie the cover with a silver braid in the place where the belt is worn.

Still Santa Claus lacks the caps that dress on the bottle tube. Create a cap from a white sheet by the type of cylinder gluing. Size Sample the bottle neck.

Close the top of the caps with red matter, it can be fixed with glue. Then, on the top edge of the caps, lock the cut of the red bay.

The remaining places on the caps are closed by syntheps. The hat is also decorated with rhinestones.

Case on the bottle of "Santa Claus" with his own hands, the master class on the manufacture of which, though volumetric, but understandable, will allow you to make a new year's meeting even more fun and memorable.

2. "Snow Maiden"

It is impossible to imagine a festive table without champagne, as well as the New Year without Snow Maiden. But there is a wonderful opportunity to make a case on champagne with your own hands "Snow Maiden". In this description, a cover on a bottle in the form of Snow Males is created visually demonstrated in this description.

For the creative process, prepare the following:

Baika blue of subtle satin. It is sold already with curved and stressed edges. It will be needed 5 meters;
- Beach white from atlas - 2 m;
- a strip of a 4-cm width of 4 cm wide, and about 1 meter long;
- finishing border of plastic flowers;
- thin lace from overdue daisies;
- Cimea silver with a wicker pattern. The width should not be around a centimeter, and the length is 1 meter;
- warming pistol and glue rods;
- one sheet of white paper;
- A bottle of champagne (you can use empty).

How is the New Year's case on the Snow Maiden champagne

First we form the removable part of the paper itself. To do this, turn a bottle into a sheet of paper and creek the edges on it. The glue itself should not get on the glass, otherwise the case does not take off.

The upper part of the cover cost to cut and the resulting bands paste each other so that the shape of the cover repeated the outline of the bottle.
By the way, if you have a lot of guests, there will be 2 bottles of champagne, make it on the secondcase "Santa Claus". This couple will definitely conquer everyone.

Cut the 15 cm of white beaches and stir as a collar on the case.

Stick one by one blue collars on the top of the bottle.

After 4 cuts off the blue color at an angle are pasted, you can move to a flat horizontal cutting of cuts. But for this you need to apply a few more bands on the back of the New Year's case on the Snow Maiden champagne.

On the front of the cover, these bands do not reach the middle, but are cut in the place where they are in contact with the previous one from the blue border.

Then go to the formation of the direct part of the cover on the bottle of champagne "Snow Maiden".

Ribbons must fall a little braziness in the center of the front. This place is then decorated with "fur".

The layer behind the layer of tapes are superimposed almost to the very bottom of the bottle. The layers must be left for 1-2 mm, because all the tours can not be glued close to each other, and the slightest space will look like a flaw in work.

Since the rear of the New Year's Cover on champagne has been reorganated again, more high than the front, it will take to stick additional cuts.

On the bottom of the robes, the white beaker is glued in two layers.

So it looks like a handy case on champagne with your own hands "Snow Maiden". Tapes should not tightly trim the bottle, otherwise the case will not be possible to remove.

At the next stage, we take for the decoration of the New Year's case on the bottle in the form of Snow Maiden. The role of fur will perform strips of synthesis.

The first strip passes vertically and closes all the places where the sections of the faces come into contact.

The second strip is separated by the bottom of the robes.

The third strip will be needed to create a collar. Each layer of sintecon is glued to hot glue.

With the help of sharp scissors, cut the corners from the collar. Must be smooth and symmetrical.

Now we take for the silver finish of the New Year's Cover "Snow Maiden". Tapes should be glued along the lines from the synthetone, thereby covering the places of contact of the blue atlas and "fur".

Silver ribbon saves all the outfit and returns under the collar, but on the other hand.

From the finishing kayma, cut several plastic flowers, they perform the role of buttons.

Shoot the buttons by distributing them evenly.

Now we take for finishing from delicate white colors. Such beyk will give the applied tenderness.

Clean the flowers on the collar, Podol and in the middle of the Toulip.

We are taken for making a headdress for Snow Maiden. First, from the sheet of paper, drain the cylinder and close one part of it with a paper circle.

The upper part is decorated with "fur", and the rest is decorated with a blue border.

It remains to stick to the cap from delicate colors on the cap, and the case on champagne with their own hands "Snow Maiden" is ready.

Friends, knitting creative work on the contest - Hooray! New Year's clothing for the bottle from Hope Maximova. Next, by the author's words:

"Here is such a festive New Year's clothing for a bottle - Santa Claus fur coats and Snow Maiden turned out to be recently.

Knit a similar product for the first time.

Girlfriend saw a photo on the Internet and caught fire with a desire to purchase such. And since it doesn't know how to knit itself, asked to tie me.

And here the experiment began. And how the new year's clothing was knitted, I described how I could. I tried in more detail and understandable.

Materials

• yarn Pekhorka "Children's Caprice" (white and red flowers for Santa Claus and White and blue for Snow Maiden),
• hook number 2.

New Year's clothes for the bottle - how to knit

1 row - knit white yarn: out of 53 air loops, closure into the ring, i.e. Insert the connecting column in the first loop of the chain.

Option number 1

Option 2.
4 row - in line by semi-roll
5 row - with mounted loop
6 row - semi-brass
7 row - with mounted loop
8 row - semi-solids
Next, change the color to the Red (Santa Claus) or Blue (Snow Maiden) and knit from 9 to 28 ordinary columns.
29 row - we reduce 3 loops in the row and also three more rows. 30,31,32 rows. In 33rd row There should be 41 loops
We change on white and inhibit 33 row by half
34 row - with mounted loop
35 row - semi-rolls in this row
36 row - with mounted loop
37 row - semi-solids, reduce 2 more loops
38 row - with mounted loop
39 row - semi-brass
40 row - in line with another thread (red or blue).

The white plate for the fur coat I knit separately on 7 hinges on the same principle, like a fur for a collar and a hem. Torch is ready!

Hood

Capped 23 air loops from white yarn closure in the ring
1 row - semi-solids
2 row - with mounted loop
3 row - semi-solids
4 row - with mounted loop
Next, change the color (on blue or red) and there are another 5.6 row
7, 8 rows we reduce the loop through one that Close Cap ..
In the process of knitting, trying on a cap on the bottle because the nipple is all different. If desired, the finished coat can be decorated with sequins or beads. For Snow Maiden Separately wearing braids from white yarn and sew to the header,
and for Santa Claus, you can tie a beard ...

Well, of course, this set of Christmas clothes for bottles was not the only one, there was another wishing to acquire such fur coats.

And another set of new year bilots for bottles was created !!!

And since the new year will soon, I think, and this set of New Year's clothes for champagne will not be the last this year!

I hope my description you will like !!!

I wish you creative success!

Nadezhda Maksimova "

P.S. In addition to thanks to the hope of participating in the competition, I want to say thank you for reminding you about such a wonderful admission of crochet, as the elongated hinges (hope in your description calls them attached). Unfortunately, this technique is not yet considered on the blog (minus me))) There is something to work on something ... But there is an article "", look, perhaps your New Year's clothes for the bottle will be connected by you on the knitting needles (not yet like crochet knit)) )

And do not forget to leave your comment. Your opinion is important to me!

If you liked the article, then share this information with your friends by clicking the sockets button only! Only, a huge request! - Do not copy the material entirely, please use the socket buttons! Do not be shy! I will help than I can :) The idea arose - share it! Find errors - write, fix it! A desire appeared somehow help blog - I will only be glad! Hosting costs money, and the materials are now not cheap ... So, if there is an opportunity, help materially)))