Youth and beauty 

Christmas wreath scheme. DIY Christmas wreath. How to make a beautiful wreath for the New Year. Rustic

We have prepared for you some ideas for making Christmas wreath, master class it will come in handy not only as, but also as an idea for a creative activity. Therefore, you can choose the method that you like and create from any available materials.

DIY Christmas wreath master class

What is good about any given in our today's article DIY Christmas wreath, master class which can be either simpler or more difficult, is that the technique can be quite combined. Strictly speaking, the production is divided into two most significant stages: the creation of the base, on which the decor is attached, and then the use of the most different, including quite unusual, decor, with which the base is pasted over or it is tied to the base. So if one idea of ​​​​creating the most voluminous bagel seems simpler to you, and another kind of decor is successful, then you can combine this and create your own unique craft.


Simplest tinsel christmas wreath, master class which we will look at the very first, as the main materials, it will require from us the actual lush green Christmas tree tinsel, a sheet of thick packaging cardboard, beads and light Christmas tree balls, preferably plastic ones. Since all decorative elements are very light in weight, we do not need a massive or extremely strong base at all. An ordinary cardboard box is also suitable, from which we need to cut a piece. Cut out a cardboard circle exactly the size you want the finished wreath to be. Glue the end of the tinsel with glue to the cardboard, and then start tightly wrapping the base on both sides, also fixing it with glue so that the tinsel does not slip to one side and bald spots do not form. The circle is finished, but it needs to be given a more rigorous shape, for this you need beads. With them, at the same time, you will emphasize the round shape of the base, and add shine to the craft. The very last stage is the fastening of Christmas tree decorations and fasteners, with which the wreath will be held on the door or wall. To decorate the fastener, tie a large red bow over it.


On cardboard, you can attach a fairly massive and voluminous decor, like these thin twigs.


Also considered a classic Christmas wreath of cones. Master Class it takes more time to complete it, since the cones need to be glued in fairly dense rows, and this must be done very carefully. But the finished surface can be additionally decorated with cinnamon sticks, dried berries, nuts, bows, small Christmas balls and more. Such an abundance will certainly appeal to all the guests of your home.


Basis for the next simple Christmas wreath, master class, video and you can easily find photo tutorials on the Web, there will be foam rubber familiar to all of us, which can be bought not only in hardware stores, but also in fabric or furniture fittings departments. It is also cut into a bagel. In principle, if you want to take foil foam, you can cut a strip from the roll, twist it into a ring so that the foil is on the inside, and glue the two ends. The resulting circle must be wrapped with corrugated paper. First, coat with glue (for example, PVA) a small area of ​​​​the donut, wrap it with pieces of paper and fix it a little with your fingers so that the glue dries a little and the paper is securely fixed. To add brightness and brilliance to this, the base must be additionally wrapped with a satin glossy ribbon, picking it up to match the shade of the paper. Further, all the decoration depends on your imagination, but you should not cover the entire surface of the base with decor, because we tried so hard to make it elegant in itself. A spruce branch, a few flowers and bows on one side of the wreath will suffice.

How to make a Christmas wreath master class

Making using improvised materials, we may well make a real New Year's wreath with their help. Such an idea how to make a christmas wreath tutorial which you can see in the photo below, is perfect for children's activities, as it does not require any complex techniques.


We need to cut out the base for the wreath, but the foam ceiling panel, which you may have left after the repair, is perfect as a material. Immediately give it the desired shape, you can add either a bow or a Christmas bell, as in our case. You can paint the craft with the most common paints, such as gouache. Paint is also useful for coloring small cones, which will serve as a decor. Additionally, it is worth making several cute owls from an empty eggshell, painted with a black marker or paints, and seating them on opposite sides of the wreath.


A flat base is also used for other decor, for example, pasta, beads. The only thing for greater accuracy is to paint the entire finished product completely with an aerosol can, then the color will be even and beautiful, you can choose it to match the shade of the front door or the colors that dominate your interior.

Today, many families have adopted the Western tradition of decorating an apartment for the New Year holiday. Such decor always looks great and cheers up. There are many options for creating wreaths. A similar decoration can be made from living branches: juniper, ordinary twigs, pine, cypress, oak, spruce. But sometimes it is created from quite unexpected materials. Of course, such decor can be easily bought in the store. But it is much more interesting to create a wreath of branches with your own hands. In this case, you can make a truly unique and festive decor.

History of tradition

Before considering how to make a wreath of branches with your own hands, let's find out who owns the idea of ​​​​creating such a decor.

For the first time, the Hamburg resident Johann Hinrich Wiehern decorated his home with such an element. He took on the upbringing of children from impoverished families. The children during fasting constantly pestered their mentor with the question: when will the long-awaited Christmas come?

To make it easier for children to count the days until the holiday, Johann made a wreath. Such an item was made from a wooden wheel. It was decorated with 19 small red candles and 4 large white ones. Every day, one candle was lit on the wreath: if it was weekdays, then it was red, and if it was Sunday, then it was a large white one.

The locals really liked this wreath, and they quickly adopted the tradition. So an amazing Christmas attribute has come down to our times.

Traditional wreath decorations

If you decide to make a New Year's wreath from branches with your own hands, then feel free to connect all your imagination. You can create a unique decoration from any improvised materials. There are many amazing ideas for making this decor.

However, if you want to follow the traditions, then you need to familiarize yourself with some recommendations. First, let's deal with the color scheme.

The traditional palette of the Christmas wreath are shades:

  • green;
  • white;
  • red;
  • gold.

What is used for decoration?

When planning to make a wreath from branches with your own hands, consider what decorations you will use.

Most often used for the Christmas attribute:

  1. Cones (pine, spruce). Natural decor looks impressive. Sometimes the buds are sprayed with a golden or silver spray.
  2. Berries. The most popular are viburnum, mountain ash, wild rose. The wreath can be decorated with fresh or dry twigs with berries.
  3. Nuts, fruits. Dried slices of lemons, oranges, tangerines look original. For a wreath, any variety of nuts is used. A twisted (dry) orange peel can be a wonderful decor.
  4. Spices. An incredible aroma will be provided by dried cloves, cinnamon sticks.
  5. Sweets. You can even decorate a wreath with cookies and sweets.
  6. Bows, ribbons. By tradition, the Christmas attribute was decorated with plain red bows. Today, striped and checkered ribbons are used for decoration.
  7. Little Christmas toys. Small bells, birds, stars, snowmen, angels, balls will add a special charm to your wreath. In addition, decorate it with Christmas tinsel and beads.
  8. Candles. This decor is suitable only for those wreaths that are located on a horizontal solid surface.

There are a few more little secrets that you can keep in mind when making a New Year's wreath from branches with your own hands:

  1. If you want the next year to bring you prosperity, attach a coin to the wreath.
  2. Well-being will bring a small horseshoe.
  3. And to catch luck, decorate the wreath with the symbol of the coming year.

Frame manufacturing

Having prepared all the necessary elements, we will begin to create a wreath of branches with our own hands. The master class will help with this.

New Year's wreath must be very durable. That is why you should thoroughly approach the manufacture of the frame.

Such an element can be created in several ways:

  • twist the vine and secure it carefully;
  • crumple newspapers, give them the shape of a ring, and pull them over with threads;
  • use an old watering hose;
  • tie bird cherry, buckthorn;
  • cut a circle out of cardboard (make a smaller hole inside);
  • use a hose from under an old vacuum cleaner;
  • use a disposable plate, in the middle of which cut a round hole;
  • purchase a ready-made foam ring;
  • apply dry grass, give it the shape of a ring and pull it tightly with threads.
  • make a circle of wire (you can use an old wire hanger).

Frame decoration

We continue to consider how to make a wreath of branches with your own hands.

So, you have a finished frame. The next step is decorating it with branches. You can use live needles. Pine branches are perfect, spruce branches look more elegant.

If you want your creation to be preserved for a long time, then make an artificial wreath from branches with your own hands. You can apply this decor for next year, diluting the composition a little with new elements. In almost every home you can find an old artificial Christmas tree. Don't rush to throw it away. After all, you can make an excellent New Year's wreath with your own hands from spruce branches. It is in no way inferior in beauty to its counterpart, created from living elements.

To decorate the frame, you need to cut the branches. It is very convenient to perform this action with the help of secateurs.

Branches are attached with an overlap. The lush part should cover the wood of the previous one. In addition, lay out the branches so that the frame is not visible. For fastening, you can use strong threads. A great solution is to use wire. It will allow you to firmly fix all the elements.

As you can see, making a New Year's wreath with your own hands from spruce branches (both living and artificial) is a simple task.

Fixing decorative elements

So, now you know how to make an ordinary wreath of spruce branches with your own hands. But it needs to be decorated. Here you can fully express your imagination. Any decor can be used.

However, the next question that you will face when decorating a Christmas wreath with your own hands from branches is how to attach the elements.

  1. Any branches are always fixed with an overlap. They should be tightly wrapped with threads or wire.
  2. You can easily glue chestnuts, acorns, cones, nuts, bows to the surface with superglue.
  3. Christmas balls can be attached with wire by passing it through the hanging hat. Fasten it around the base of the wreath. In addition, Christmas decorations can also be glued to the base of the wreath with superglue.
  4. Ribbons can be wrapped around a wreath, tied into bows. If it is necessary to firmly fix the strip, then it is glued to the base wreath.

Attaching decor to the door

So you made a wonderful Christmas wreath with your own hands from branches! But now a new question has arisen: how to attach this masterpiece to the door?

There are several ways:

  1. Make two absolutely identical wreaths in weight. Take a long ribbon. Tie one end to the wrong side of the first wreath, and attach the other end to another Christmas attribute. Throw the tape over the door. The first wreath will be on the outside of the door, and the other will show off on the inside. Secure the top with masking tape. No one will see him anyway.
  2. If your door has a peephole, then you can fix your masterpiece as follows. Take a strong fishing line and tie or glue it on the wrong side of the wreath. Throw this structure through the door, approximately as described above. But the second end of the fishing line should be fixed around
  3. A fairly simple method of fastening is the use of hangers with suction cups. They can be purchased at the hardware store. With these hangers, you can easily attach a wreath to the door. If your decor is light, then you can get by with two pieces. It is recommended to hang the wreath by the upper and lower parts.
  4. You can use double sided tape. This is the easiest and best option. One side of the adhesive tape is glued to the wrong side of the wreath. Then you need to remove the protective film and fix the product on the door.

Conclusion

Now you know how to create a unique wreath of branches with your own hands. And do not forget that you need to prepare for the New Year holiday in advance. In this case, you will have time to adequately decorate your home.

Good afternoon. Today I have put together - in one article - several ways to make DIY Christmas wreaths at once. I'll show you how to make a Christmas wreath base - not necessarily wicker or spruce legs (not all city dwellers have this material) - so here you will see alternative Christmas wreath bases - from newspaper, fabric, toilet paper rolls and other suitable material.

So let's get started.

INTRODUCTION…

How to make a BASE RING

for a Christmas wreath.

Let's approach our question in order. First, let's figure out what BASIS exist for New Year's verks. What are the ways to MAKE such a base ring with your own hands. And then we will decorate the finished bases.

Here are the basics for Christmas wreaths we will look at.

  1. Paper flat base for a wreath (+ ways to decorate wreaths on this basis)
  2. Volumetric base for a wreath newspaper or toilet paper
  3. Braided wreath ring(from straw or wicker)
  4. Christmas wreaths with foam core ring.
  5. And then I will show you how to make decorations for wreaths with your own hands.

OPTION #1

FLAT CARDBOARD

WHERE TO GET. We take a large sheet of cardboard (a box from a large pizza is perfect). Or you can take large gray packing boxes (they are freely available next to the back entrance to any grocery store). You can ask at the store (they will gladly give you a chocolate bar). You can ask the supply manager at your work - he has such a good basement full.

WHAT TO DO. We put a large dish on a sheet of cardboard. Outline with a pencil. Put a small saucer in the center of the drawn circle. We check with a ruler that the edge of the saucer is at the same distance from the large circle to the west, north, east, south. We also circle with a pencil.

We cut out our flat bagel from cardboard with scissors. We take white toilet paper and wrap our future Christmas wreath. Or a lace ribbon (it will be more expensive for the money). And then we decorate the Christmas wreath ... this will be discussed below in our article.

DECOR OPTIONS

Christmas wreath with a flat base.

DECOR of the New Year's wreath - WITH THREADS AND FELT.

We wrap the base of cardboard with threads. We twist roses from felt and sew them on a thread winding. We cut out the shape of a Christmas tree from salt dough, fashion houses (we push windows into them). In some places we sew Christmas balls in color to the general palette.


DECOR of a New Year's wreath - from an old SWEATER.

If you have a sweater among old things for a long time. Then you can cut off two sleeves from it and decorate the flat base of the wreath with them. To do this, each cut sleeve unravel along the longitudinal seam- open - wrap around the circumference of the ring-basic and again sew the same seam.

We do the same with the second sleeve - and we direct the end of the second sleeve to the top of the first sleeve - so that this the cut top is hidden inside the neat elastic band of the opposite sleeve. Further, such a flat knitted base can be decorated with snowflakes, ribbons, and even skates (or any Christmas tree decorations).

DECOR of the New Year's wreath - with RIBBONS

For example, you can glue this cardboard circle with corners made of pieces of fabric (or paper). Cut the fabric into triangles - each fold 2 times in half. And glue on a cardboard circle. First, we impose triangles on the outer edge of the circle, then on top, closer to the middle, then another row closer to the middle, and the last row along the inner circle with a cardboard blank for a Christmas wreath.

DECOR of a New Year's wreath - from PAPER.

You can also glue such a flat bagel for a Christmas wreath with paper-cut parts. Paper bags, paper stars.

You can not cut a hole in the cardboard ring. And make a wreath of gift paper and Christmas balls. We see in the photo below that gift paper is cut into rectangles. Each is folded into a tube and glued to a paper circle - ray-like, with a small distance between the tubes.

In this distance we fill with smaller tubes. And fill the middle with balls. We string the balls on a wire - we get a bunch of large and small Christmas balls. Punch 2 holes in the center of the cardboard. We put the ends of the wire into the holes, and twist it on the wrong side, forming a loop for which this vein can be hung.

You can cut pieces from music paper, roll them up into tubes and glue the foam ring over. You get such an elegant wreath.

DECOR of a New Year's wreath - from cones.

The same flat cardboard donut for a Christmas wreath can be painted with paint. And immediately begin to stick around with the prepared material - spruce paws, fir twigs, paper tinsel, Christmas tree garland or forest cones (as in the photo below). We attach the cones to the mounting foam or hot glue from the glue gun.

Decor for a flat wreath - from chopped branches.

WHERE TO GET. This option is suitable for summer residents or villagers. We need branches (remaining after pruning an apple tree, for example). A city dweller can also stock up on three or four thick branches (trees are also cut in the city).

WHAT TO DO. We chop the branches with an ax, or file with a jigsaw. Cut out a ring from cardboard (from an old box). And now on this ring we will lay out pieces of our stumps in a chaotic manner. Each piece is smeared with glue before laying.

WHICH GLUE IS SUITABLE- shoe glue in tubes, or hot glue from a glue gun ($ 3 sold at a hardware store) Or a can of mounting foam also sticks well.

We impose-paste pieces in several floors. We dry. And covered with white paint WHICH PAINT WILL SUIT- you can buy acrylic paint at a hardware store ($ 1.5 per liter). You can buy paint in a spray can (it's already much more expensive). You can dilute white gouache with PVA glue and paint with a wide brush or a foam sponge for washing dishes (very convenient). And then such a white wreath can be decorated with bright accessories.

DECOR of the New Year's wreath - natural material.

You can put nuts, cones, pieces of moss, twigs, sticks - any natural material on a cardboard circle.

DECOR of the New Year's wreath - with Christmas BALLS.

In the same way, Christmas balls of various diameters can be laid on a flat cardboard circle. Attach with glue from a glue gun. You can add strings of glass beads and Christmas tree beads to the balls.


Christmas wreath ring

OPTION #2

FROM WIRE.

And since we have reached the wreaths of Christmas balls, then this type of material (Christmas toys) can be attached to another base for wreaths - to a wire ring.

Here in the photo below we see how we twist the ring from ordinary wire. And then we hang bundles of Christmas balls on it. By the same principle as onion bulbs are hung in a braid when they are linked together in a garland and hung from the ceiling in the kitchen.

A variety of decorative material can be attached to such a wire ring.

For example (photo below), we can take ordinary foam balls, chop them into pieces of wire, attach each wire tail to the common ring of the wreath and cover everything together with silver spray paint.

You can do it even easier - make a fluffy New Year's wreath - tie many, many strips cut from paper napkins (or white airy fabric) around the wire frame. As on the Christmas wreath from the photo below.

New Year's wreath ring

OPTION #3

FROM THE NEWSPAPER

You can wind flagella-twigs from sheets of newspaper. And from such newspaper branches, roll up a wreath - just like from twigs. We also make flower decoration from newspaper

We roll the sheets of the newspaper into a tube. We take a new sheet and put our tube on the edge of this new sheet and wrap it in this sheet. It turns out the tube is already almost 2 times longer. We put it on the edge of a new sheet - and also wrap it in a roll (we already get a tube 3 times longer). We continue until we get a tube long enough to be able to bend a large ring for a Christmas wreath from it. We wrap the tube with a rope, and fold it into rings - we supplement the thickness with new layers of newspaper and wrap it with a rope again. In the end, you can wrap everything with white toilet paper or tape or bandage.

You can also do wreath decor FROM FABRIC. For example, cut the fabric into squares. Fold each in half and sew the side seam and bottom seam - we get a mini-pouch. We put cotton wool (or synthetic winterizer) in it and sew up the top seam. We tie the middle of the bag with a ribbon - and we have a plump bow. We tie these bows to the wreath ring.

Chubby sweets are made from the same squares of fabric - here you can not make seams. Put a synthetic winterizer, wrap and wrap the ends of the "sweetie" with threads.

Such a newspaper base for a wreath is quite heavy (paper weighs a lot). Therefore, you can make a lightweight (hollow inside) model of the Christmas base ring. Like the one in the next idea...

New Year's wreath ring

OPTION #4

FROM ROLLS.

If we want to get a WEIGHTLY light base for a wreath, then for this we string toilet paper rolls on a rope (or wire). We lay them on the table, level them so that they lie in the shape of a regular circle - we fix the rolls with pieces of adhesive tape, that is, we glue them to each other so that they do not crawl and spin on the rope and do not change the circular shape.

Then we do a newspaper wrap, or a wrap with a medical bandage, or toilet paper, or scotch tape, or masking tape.

Decor options for the Christmas wreath from LIGHT BASIS. On such a hollow wreath inside, you can attach light jewelry, made of felt or crocheted, small twigs are thin and light so that their weight does not warp the wreath, does not make the rolls empty inside crumpled.

You can tie pieces of tulle on it. We buy tulle in different colors in the fabric store. We cut it into identical rectangles, so long that it is enough to wrap the ring around the wall, tie it in a knot and the ends still stick out.

Paper decorations are also suitable. Fans made of colored gift paper (or elegant table napkins). We make a fan from a strip of paper and unfold it into a ring.

Christmas wreath ring

OPTION #5

FROM FOAM.

WHERE TO GET. Styrofoam rings for crafts are sold in craft stores. Search your laptop for "styrofoam ring + name of your city" and you will find a store that has such things. Or you can order with delivery from China (for example, on the Aliexpress website).

This ring is ready to use. And you can think of any winding for him. For example, coniferous or fir paws (as in the photo of the Christmas wreath below). We just take branches of a live Christmas tree, or branches of an artificial Christmas tree and tie them to a wreath. So if you want to throw away an old artificial Christmas tree, take your time - cut off good non-bald branches from it - they are suitable for wrapping a wreath.

And you can do it on a Christmas wreath simple FABRIC FLOWERS.

It is very easy. The photo below shows how to quickly make this New Year's wreath with your own hands.

We buy a wide ribbon, cut it into segments OVERALL (see photo) - we get RHOMBOS. We squeeze each rhombus in the middle(obtuse sides) rewind the compressed middle with a thread. It turns out immediately 2 petals from one rhombus.

We repeat the same with two more diamonds- and we get three pairs of petals. We add them to each other, so that the wrapped centers of three rhombuses meet together (in the center of the flower) - we fix them with a thread winding so that all three centers hugged each other. We thread a needle into the end of the thread and sew a few beads to the center of the flower to hide the rough place of the winding of the flower.

With the help of pins, we attach the flowers to the body of the foam ring of the wreath.

Also, the foam ring can be glue with NATURAL MATERIAL . It could be in-shell peanuts. They are inexpensive, we glue them on the glue gun to the foam ring (the glue gun is sold in any building department of the store, it costs 3-4 dollars). And after the peanut sticks, we cover everything with gold spray paint.

And you can also make a pasting of a foam New Year's wreath from SCALES OF CONES. To do this, we collect more fir cones, take pliers and tear out the scales from them. And then we smear the section of the foam wreath with a glue gun and lay the scales on it (like tiles) ... then we spread the new section and lay the next portion of the scales. Painstakingly, slowly - but simply.

If after harvesting plum jam you have left bag of bones. Then he, too, can take part in the creation of a Christmas wreath.

You can go to the woodshed and collect PIECES OF BARK. Break them into pieces of the same size and also glue the ring for the New Year's wreath with them (as is done in the photo below).

And such a foam ring for a wreath can be tie with SPOKES or HOOK. And knit lots and lots of Christmas wreath decorations (as in the photo below).

Christmas wreath ring

OPTION #6

FROM STRAW.

We take bunch of straw wrap it with a thick thread (or thin wire). Apply to the end of the bundle new beam- and we also do winding with threads. Again we take another bunch, apply it to the tail of the previous one (we bury it in the middle of the tail) and make a winding with threads - as we work, we gradually set a circular direction for our straw tail.

We do repetitions until our curly straw tail closes into a ring. We cover the place of closure with straws and also tightly rewind with threads. Again we lead a spool of thread around the entire bagel, and in the direction of travel we put thick straws in the thin places of the wreath.

And then, along the way, you can already add a green branch of a bush or spruce paws, too, I fix them with the same twine.

New Year's wreath ring

OPTION #7

FROM BRANCHES.

And now the most time-consuming basis for the New Year's wreath. From rods. There are also several auxiliary techniques for creating such a base from branches. And I have collected all the ways and techniques by which a Christmas wreath is created from twigs and branches. Let's look at them in order.

Wreath weaving method No. 1- FROM FRESH BRANCHES.

The most important thing in a wreath of twigs is to ensure that it is a perfect circle. That is, flattened into an oval. And it is also necessary that its thickness be uniform over the entire circumference of the ring - so that there is symmetry and harmony.

Therefore, to create a wreath of the correct form, you need a SAMPLE CIRCLE. You should find some kind of round guide piece that will serve as a template for the round wreath.

Here in the photo below we see how a cut round laundry basket served as a convenient form for quickly creating a wreath. The bottom of the basket itself holds the rods in the shape of a regular circle, and all you need is to calmly and confidently put new branches in the right places.

When the entire stacking of branches along the wreath is evenly distributed, we do the ligation with threads in several places, or wrap the entire wreath with thread in a spiral. And our craft can be taken out of the basket.

The same can be done with the top cut off part of the basket. Also use as a shaping limiter for wreath rods.

In this case, it also helps that all the branches have just been cut from the bush - so they are fresh and flexible. That is, they easily repeat the shape of a circle without breaking.

But what if we only have dry branches that have hardened in their forms at our disposal? To do this, the following method of laying branches will help us.

Wreath weaving method No. 2 - FROM DRY BRANCHES.

If we want to lay dry, inflexible branches in the shape of a circle, then this is also possible. To do this, we again need a CIRCLE TEMPLATE - for the laying stencil. It can be cut out of cardboard, or drawn with chalk on the floor (circle a round basin with chalk, put a round dish in the middle of the drawn circle, and also circle it with chalk). The circle template is ready.

Now we lay all the dry twisted twigs in a chaotic mosaic within the boundaries of this sample circle. We lay until we begin to like the outlines of our future New Year's wreath.

And then we tie up the key points with threads, gently pushing the thread between the branches, trying not to move them much from their intended places. You can lay out pieces of thread on a circle template in advance, and then (after laying the branches) just raise the ends of the threads and tie them into knots. After that, you need to carefully lift the wreath and once again make the winding with threads already in a spiral - along the entire wreath.

Wreath weaving method No. 3 - FROM SHORT BRANCHES.

And if you only have short stick branches and knots at your disposal, then you can also make a wreath out of them. This will work if short sticks are fixed on a wire frame. Two pieces of wire (shorter and longer) and 4 sticks will help to make a frame.

We turn two pieces of wire into a ring - we get a larger and smaller ring.

We put the smaller one in the center of the larger one and tie sticks on four sides (perpendicular to the center).

And now we tie sticks around the entire circumference of the rings, new sticks to these sticks, and so on until we get a nice branched base wreath. It remains only to decorate it and make it elegant New Year's.

Wreath weaving method No. 4 - FROM WILLOW RODS

Willow twigs before work keep in water otherwise they will dry out and will not bend. They cut the rods, came home, and put them in a bucket of water with the cuts down, and twisted the ends into a bucket, bent, soaked. Wet rods - perfectly fold (like rubber bands). And then already in the wreath they dry - and the wreath becomes stale.

After drying, it can be PAINTED - with white gouache using a foam sponge. And paint over the unpainted cracks of the wreath with a brush (it will crawl into the inaccessible places of the wreath). So that the gouache does not stain your hands with white - we spray the wreath on top with hairspray - this fixes the paint and adds shine.

If you take BIRCH BRANCHES, then they need to be soaked in very hot water. By the same principle as a birch broom is ripped in a bath. The twigs will become hot and flexible - and you will quickly twist them into a wreath base. Then dry and paint.


DECOR OPTIONS

for Christmas wreaths

from branches and vines.

DECOR OPTION No. 1 - figures from dough.

DECOR OPTION No. 3 - gossamer stars.

Look at the photo below. You see on the wreath there are two stars cut out of a threaded web. Such the web is easy to make yourself.

We take a plastic file. We pour a puddle of PVA glue on it (it is possible with transparent silicate glue too). We take a spool of thread of the color you want to see the future spider web. And we begin to unwind the coil and lay the threads in a puddle of glue - in a chaotic manner. We try to lay the threads so that there are no big holes in our homemade cobweb. We leave it all to dry for a day (or overnight).

The next day, we easily separate our dried cobwebs from the file. On top of it we put a star stencil cut out of paper - and cut the cobweb with scissors, repeating the contours of the star. We get a beautiful decoration for the New Year's wreath.

In the same way, you can cut gossamer flowers for New Year's wreaths of gentle design.

DECOR OPTION No. 4 - knitted snowflakes.

Everything is clear here. For those who crochet. We take. We knit. Starch the snowflake (so that it is hard and keeps its shape). We dry the starched snowflake in a straightened form - on thick cardboard, fixed with pins in a spread.

We tie our hard starched snowflake to the wreath.

In addition to snowflakes, you can knit and starch bells. Dry from the need to put on jars of yogurt.

DECOR OPTION No. 5 - crafts from felt.

We buy felt. That is, wool, from which yarn (thread) has not yet been made. Pour warm soapy water into a bowl. We take a piece of such wool, immerse it in a warm soapy solution and roll the ball with our hands, 5-7 minutes, until it becomes round and hard. We dry. We make several of these woolen balls. And we get the decoration that we see in the photo of the Christmas wreath below.

By the same woolen-soap principle we make a rose. From pieces of wool we mold flat petals of different sizes in soapy water. We twist and sew them into a rose.

DECOR OPTION No. 6 - Balls and stars.

Here, too, everything is simple and clear. We thread the wires into the ears of the balls and fasten it to the selected twig of the wreath.

BRILLIANT STARS. Cut out stars from cardboard. The inside of the stars is also made into openwork holes. Coat the stars with glue - and dip in a shiny sprinkle . topping can be bought at a craft store. Or use nail polish. Or DO IT YOURSELF. To do this, we buy a shiny fluffy Christmas tree garland and cut it finely and finely (we get a whole bunch of small shiny cuts) - cheaply and efficiently.

DECOR OPTION No. 7 - brilliant flowers.

Here on the Christmas wreath (pictured below) we see golden flowers. Of course you can find them for sale. Or you can save money and do it yourself. Now I'll tell you how...

We take cotton pads. Cut out large petals from 5 cotton pads. And 5 more small petals. Now we pour PVA glue into the saucer - we dip each cotton petal into the glue, squeeze out the excess glue - we put the petals on a plastic file forming two five-petal flowers - large and small (we bend the petals in a raised state - let them dry like that). We dry them all night. In the morning we take our 2 dried flowers - and connect them - we glue a small flower into the middle of a large one. Next, with a brush, cover them with a thin layer of PVA glue - and sprinkle with gold sprinkles. We get such luxurious flowers for decorating a Christmas wreath. With their own hands they made beauty from cheap disks and sprinkles cut from a Christmas tree garland. Fast, simple and cheap.


DECOR OPTION No. 8 - natural material.

Below we see a photo of a Christmas wreath that is used to decorate birch bark (we wrap the wreath with it like a ribbon), stars are cut with scissors from the same bark.

Flowers roses made from corn peel- we roll the corn cake into a roll, cut the parts of the roll with scissors, form the petals with our hands.

Dried fruits (dried fruits are also suitable for compote). And sprigs of mountain ash or hawthorn. To prepare for the Christmas wreath the bright fruits of their best not to dry(they will wrinkle and lose sight) and mummify in paraffin or wax. To do this, we melt a candle cut into pieces in a saucepan (from wax or paraffin - buy in the household department of the store) - and dip the fruits of mountain ash or hawthorn hanging by a thread into hot wax. We dry it on the same thread (we put a tree branch in a vase and call our clusters with fruits onto it.

These are the ideas of DIY Christmas wreaths I picked up today. I wish you successful searches for the material and design of your future New Year's wreath.
Let this Christmas holidays decorate your home with a new handmade wreath.

Good luck with your New Year's work.
Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.

Relatively recently, it took its place among the most beloved holiday decorations. Protestant pastor Johann Hinrich Wiehern made it in 1839 for his children who were asking when Christmas would be. This wreath was made from an old wooden wheel with four candles, each of which was lit on Sunday for four, three, etc. weeks before the big holiday and helped the children count the time until it. This beautiful idea took root in Christianity and became widespread.

In this article, we will tell you how to make a traditional-style Christmas wreath with twigs and cones, as well as how you can create it from materials that are completely unexpected at first glance. The result of your work will not be inferior to finished store products in terms of beauty and will certainly overtake them in originality.

Bright and festive

If you like to emphasize your individuality in everything, you will love this wreath. Your last name can be encrypted in the letter used to decorate it.

To make a Christmas wreath with your own hands, you need:

  • grapevine base ring;
  • unbreakable Christmas balls and other plastic decorations of various sizes;
  • multi-colored ribbons;
  • colored grid;
  • wooden letter;
  • acrylic paints;
  • wire.

Procedure:

  1. We begin to work with decorating the letter. Color it in the main color (here - red), then add multi-colored polka dots (white and green).
  2. Now we will pass the wire into the fasteners of large balls and fasten them to the base ring.
  3. Then we will tie bows from a mesh ribbon directly on the vine. To make the wreath more magnificent, cut their edges.
  4. When the letter dries, we will drill holes in it to thread the wire through them to fix it on the wreath.
  5. Fill in the remaining empty spaces with small Christmas decorations and multi-colored bows.

Simplify the task

In 10 minutes, you can make such a monogrammed Christmas wreath with your own hands. A photo:

Only a vine wreath, a letter, an artificial spruce branch with decorations, and hot glue from a gun were used here. Like a designer, all this needs to be put together - and the wreath will be ready. The main thing - wherever the branch and the letter touches the base, try to apply droplets of glue.

MK: DIY Christmas wreath

In this master class, we will teach you how to professionally work with natural material. You will need:

  • wire base for a wreath (you can use ready-made, or you can build it from two hangers);
  • floral wire;
  • moss, spruce branches;
  • decorations - cones, balls, bells, colored sticks, etc.;
  • colored ribbon for a bow.

Progress:


wreath decoration

Since we are working with natural material, it is advisable to think in advance how you will decorate the product and sketch out a diagram on paper. For a wreath, as in the photo, proceed as follows:

  • Make a magnificent bow, thread a wire into it and fasten it to a ring of branches. Optionally, you can add a beautiful large bead or brooch.

  • Paint the buds white or silver around the edges. Then wind the wire between the scales at their base and stick it into the base of the wreath. When the ends of the wire appear from the wrong side, bend them and hide them back in the moss. Change the angle of the buds so that they look natural, but at the same time give volume. At this stage, it is convenient to work like this: put the wreath on the table so that the edge of the product is in the air. Hold the wreath with one hand, decorate with the other, gradually rotating it.

  • Attach bunches of colored twigs, balloons, bells, and other decorative items you can find.

Simple and inexpensive

But such a New Year's Christmas wreath, made with your own hands, requires minimal material costs. For its manufacture you need:

  • cones (collect them in the nearest forest);
  • wire hanger;
  • ring beads with a diameter slightly larger than the thickness of the hanger;
  • ribbon;
  • glue gun;
  • artificial snow, white paint (optional).

Manufacturing:


Cones can be decorated with artificial snow or lightly painted with paint, like the previous wreath.

Unusual DIY Christmas wreath step by step

Who said that you need to use only natural materials? Look at this chic wreath of Christmas balls.

It is beautiful, festive, even a little glamorous. It can be easily placed not on the door, but in the room. For such crafts, it is necessary to take unbreakable balls. Then the wreath will serve you for more than one year and will be absolutely safe for children and pets. In addition, plastic jewelry is cheaper than glass.

You will need:

  • balls - for a wreath, as in the photo, about 125 were used;
  • base ring made of vine or foam;
  • glue gun.

For work, it is better to use jewelry in the same color scheme, but in different shades and sizes. If you have unnecessary balls, you can color them. So you save on materials. For a change, you can add elements with sparkles.

How to make such a Christmas wreath with your own hands:


Even a child will do

Do you know that even from plastic bags you can make a Christmas wreath with your own hands? A photo:

Agree, original and absolutely not expensive. If you are afraid that the wreath from the door of the apartment may disappear in an unknown direction, then use this idea. It is also an interesting option for creativity with children. You will need:

  • plastic bags - two colors (1 pack of each);
  • white wire hanger;
  • scissors;
  • ribbon;
  • pin;
  • artificial holly sprig or other small Christmas decoration and some wire to attach it (optional)

This wreath is made like this:

  1. Give the hanger a round shape.
  2. Cut plastic bags into strips about 8*4 cm in size. Their length and width can be varied according to your idea.
  3. Now simply tie the plastic strips on the hanger, alternating colors. Continue until the wreath is full and voluminous.
  4. Trim off excess, sticking out strips, but do not overdo it so as not to spoil the round shape.
  5. Tie a ribbon bow and pin it to the hanger.
  6. Wrap a sprig of holly with wire and secure to the wreath.

The second life of old things

By the same principle, a Christmas wreath is made with your own hands from pieces of fabric.

Decided before the holidays to conduct an audit in the closet? Turn unnecessary things into a beautiful and cozy decoration. For splendor in this work, a base for a wreath of four wire rings was used, but such a structure can be built independently.



For such a wreath, you will need fresh colors: roses, chrysanthemums or any of your favorites and coniferous twigs.

If music is not alien to your heart, then you can try to make such a wreath.

Cut out the base from cardboard, braid it with braid and glue the cones from the music magazine.

Wreaths of dried fruits, citrus fruits, spices and cones with nuts look and smell very beautiful.

Decorating the house with a Christmas and New Year wreath is a very beautiful custom that came to us from Western countries. A few years ago, such wreaths looked rather exotic in Russia. But today it is an absolutely typical type of house decoration on the eve of Christmas, which is made from spruce branches and four candles, fixed vertically or placed on a table. According to Catholic custom, the first candle is lit on the first Sunday of the four-week fast - Advent, the next Sunday - the second, and so on.

This fragile wreath was made from Christmas decorations and frost. Just shine.

Artificial spruce branches can also be used to make a wreath, it is not at all necessary to destroy the trees.

Why only toys and snowmen, a butterfly on a Christmas wreath also looks harmonious.

Rowan twigs, dried flowers and pine spruce branches - your wreath will be the best.

Christmas wreaths owe their appearance to the Hamburg Lutheran theologian Johann Hinrich Wiehern, who took on the upbringing of children from poor families. In the post, they kept asking when Christmas would come. And in order to make it easy for children to count the time until the holiday, in 1839 Wichern made a wreath based on the old wheel, which was decorated with nineteen small red and four large white candles. Every morning, one small candle was lit in a wreath, and on Sundays a large one was added to them.

The symbolism of Christmas wreaths highlights several basic meanings. At first, the addition of fire and light in wreaths symbolized the growing expectation of the birth of Jesus Christ - the light of the world. To everything was added the interpretation of the round shape, the symbolism of the wreath, due to spruce greenery, the colors of candles and decorative ribbons acquired additional significance. So Christmas wreaths and four candles began to be associated with the meaning of the globe and the four cardinal points. The circle is considered to be a symbol of eternal life that Sunday gives, the green color is the embodiment of life itself, and the candles are the light that illuminates the world on Christmas days. In the Christmas tradition, it is customary to decorate wreaths with three purple candles and one pink candle, which corresponds to the liturgical colors of worship during the Advent period. The pink candle is lit on the third week of Advent, when Sunday is called Gaudete, or Rejoice!

And such a bright wreath can be made from bright scraps of fabric. Below the picture you will find a detailed master class.

DIY Christmas wreath

Of course, today you can buy these symbolic wreaths anywhere. But what could be better, more reverent and even more majestic, how to make a christmas wreath with your own hands and decorate your holiday home with it. This will hide the real mystery of waiting for a miracle, although it would seem that this is just needlework, the result of which will be a New Year's toy, of which there are already many. After all, few people observe fasting, and only a few adhere to the ritual of lighting candles.

Is this an artificial tree or a real one? I don’t see the difference, but I’ll make a wreath exactly from an artificial one, why kill a living tree?

Fir needs to be trimmed and cleaned regularly. and from cut branches and fallen cones you can make such a wonderful wreath.

Fluffy, bright and in a scarf, so as not to catch a cold on New Year's Eve - such a wreath will be to the delight of children.

But this spruce spruce branch definitely appeared after trimming the spruce. And they got rid of dry twigs (let the tree rejoice), and weaved a wreath. It is not necessary to cut down a beautiful blue spruce for the holiday week.

An owl and a charming Christmas flower poinsettia coexist peacefully on the wreath.

But in the process of making this beauty, a person is subconsciously imbued with the sacredness of the action and, to complete the work, is fully overwhelmed with a sense of the triumph of the holiness of the upcoming event. As for the degree of complexity of making a wreath, there is nothing difficult about it. In addition, you should not deny yourself the joy of doing joint creativity with your children. And after determining the type of wreath and preparing the necessary materials, you can start working without any doubt.

From a tie, feathers, balloons, there are no wreaths!

So, in a wreath, the main thing is the base, its base, which will keep the decoration from scattering. The base is created from any suitable item. The classic base is natural raw materials in the form of straw, twigs, vines and even the rim of a wooden wheel. At worst, you can use wire. But in practice, any improvised material is taken as the basis of the wreath. So an excellent base will turn out from wires twisted and fixed in the form of a circle (for example, a simple extension cord). A piece of hose, a thick cardboard that can be glued together from several layers of a thinner one, newspapers compressed into bundles and fixed with a thin wire, a fabric in the form of a roller filled with cotton wool or padding polyester, and similar materials will also do.

Classic pine wreath.

But this candlestick wreath will sparkle with a gentle flicker from the candle flame.

Toys, beads, nuts and garlic - you can immediately see the hostess in the house.

To do DIY Christmas wreath, you will have to stock up on garden wire or twine, scissors or pruners, glue or liquid nails, and also a decoration for a wreath. For a traditional wreath, you will need a spruce or pine spruce branch, which can be replaced with a thuja or holly branch. You can also make a wreath that will be a decoration "for centuries" if you use artificial spruce branches, and then periodically change the decor. By the way, you can decorate a wreath not only with the usual New Year decorations, but also with everything that your imagination can tell you. For example - dried flowers, cones, berries, fruits, vegetables, cinnamon sticks, spices, citrus peel cut in a spiral, cayenne pepper, tangerines, apples, artificial and fresh flowers, candies, sweets, Christmas cookies, garlands, Christmas tree decorations , decorative braid, beads and ribbons. Ordinary brushes and paints, silver and gold sprays and artificial snowballs will also come in handy.

Such a wreath of ribbons can be made even by a baby under mother's and father's guidance.

Take a wire ring as a base and generously decorate it with ribbon bows.

Who would have thought that a wreath of mints can be made from an ordinary dry-cleaner's hanger.

The handmade store sells such soft blanks for a wreath, you just have to buy red felt and cut circles of the same size out of it.

From felt circles and invisibility we form flowers and generously decorate our wreath.

Do you have an old hoop lying around or just a round base? Decorate it with tinsel and the wreath is ready!

Practical advice will also not be superfluous, for example, how to make a wreath from pine or spruce branches. Usually, a frame is first made of wire or other rigid material. Then coniferous branches of the desired length are cut and weaving of the wreath begins. The branches are laid in a clockwise direction, and the bare part of the previous branch is covered by the lush part of the next. The second layer is woven in the opposite direction, which will help to add volume to the product. Between themselves, the branches are fastened with wire, and it is better to take green, which will be invisible against the background of needles. Thin garden or craft wire will also work. The number of layers is taken such that Christmas wreath, handmade done, will be pleasing to the eye. Then the wreath is braided with a satin ribbon and decorated with materials of your choice. Usually such a wreath is hung on the front door or on the wall, and also placed on a coffee table or shelf. But the future location of the wreath needs to be thought out in advance, because it can turn out to be quite heavy, which will not hold on to the mount of adhesive tape or pushpin, and you don’t always want to spoil the wall with a thick nail. Therefore, even before starting work with a wreath, you need to decide on its placement. If it is possible to fix it vertically on a strong mount, then you can make a heavy version of the wreath, and if the mount is rather flimsy, then it is better to choose a lighter form, which makes the decoration no worse. And if you still want to make a weighty thing, but the mount did not work out, then you can place the wreath on a horizontal surface - a table, shelf, stand. But here it will be possible to let your imagination run wild and load the wreath with any, even the heaviest toys. It will look so beautiful rather heavy, but very symbolic Christmas wreath of cones, decorated with gold spray, artificial snow, nuts and apples. Candles are traditionally inserted into such a wreath laid on the table. To fix them well, you can heat the wire and stick it perpendicularly into the base of the candle, then fix the wire to the main frame and decorate the lower part by a third with coniferous branches.

All. what you need for this wreath is sold in the supermarket, you just need to strictly adhere to our master class.

Wrap a white ribbon around the base, and then prepare snowflakes.

True, you can make a wreath of feathers in a different way by wrapping a boa around the base.

And this wreath with roses is also made from a round base and felt.

Handmade lovers probably have a lot of small balls on hand, from which, by the way, a beautiful wreath will come out.

Cut citrus fruits into circles, dry them in the oven and we will tell you what to do with this good.

And here's what to do: twist a ring out of straw and stick circles of oranges on it.

However, it is not necessary to use straw for a wreath; a regular blank is also suitable.

Such a beautiful wreath of red balls is made quickly and easily. Read our master class.

Take the wire hanger. Such hangers are given in dry cleaners.

Use pliers to separate the hanger.

Prepare several sets of balls of different diameters.

By the way. it took us about 80 balls to work.

String the balls on the base so close to each other that the wire is not visible.

If the balls start to stray and roll, fix them with a drop of glue-seconds.

Your wreath should be tight.

When the last piece of jewelry is put on, twist the ends of the hanger.

Now wrap the hook with red ribbon.

Attach the tape with glue.

All you have to do is make a bow out of the ribbon and tie it to the wreath.

Although not only the base is made from almost any suitable material. The wreath itself and its decoration can also be made as an absolutely unexpected fruit of your own imagination. So you can create a wreath of buttons of different diameters and styles, attached to a cardboard base and suspended with a strap with a round buckle. You can also dispossess your husband and make a creative wreath of ties wound around a plastic rim so that the tongues look beautifully outside the jewelry like flower petals. An absolutely unexpected option is a newspaper wreath: strips of paper are collected in the form of a three-dimensional flower and strung on a wire frame. You can decorate a wreath of spruce paws with small Christmas balls and memorable family photos. Since the area is not particularly expected, you will have to limit yourself to five or six small photos.

hang up Christmas wreaths on the door can be done without much difficulty: you need to tie a beautiful ribbon on the inside to the fittings or door handle, throw it over the top of the door leaf and fix it in a suitable place with a button, tape or carnation. This will depend on the weight of the decoration and the material from which the door is made, since you definitely cannot hammer nails into the armored canvas. On the front side, the wreath itself clings to the ribbon; from inside the room, the ribbon is usually decorated with cones, toys and rain.

But such a wreath can be made from red ribbons and burlap.

Hanging wreaths are usually made from lightweight material. Therefore, you can wrap a tire from a children's bicycle with a beautiful striped fabric, decorate it with beads and small postcards. It would be nice to pick up postcards in the old style. And from such a material, a wreath will definitely become your favorite: take a handful of small balls and decorate them with a circle made of the same wire. It will turn out a soft and fluffy multi-colored caterpillar, curled up in a ring. Fast and cute. Everyone will probably love the idea of ​​making a wreath out of dried citrus rings attached to a paper ring. The wreath can be decorated with a spruce branch and a bunch of bright red Christmas balls with the same ribbon. Fragrant, beautiful and fun! A wreath made of vines, on which snowflakes of all shades of blue are glued, looks fragile and elegant. The impression is that they have just descended from the sky onto a vine branch. Very gentle Christmas wreath it will turn out from azure ribbons, collected in ruffles and decorated with small snow-white balls, similar to snowballs. You can also assemble such a wreath from separate modules using the origami technique. To do this, modules of the same size in the amount of approximately 60 pieces are folded from green colored paper of several shades. Assembled triangles are placed on a cardboard sheet with a wreath-shaped circle drawn in the upper part: from a darker color to a lighter one, which will create the illusion of volume. At the same time, the acute angle of the module is hidden under the previous figures, as in real branches. Then a candle made of pink cardboard with a yellow flame made of paper is “placed” in the center of the wreath. Paper snowflakes cling to the serpentine ribbons, as if hanging from a wreath. A cardboard sheet can be taken into a wooden frame or an edging can be made from the same bright cardboard. That's it - unexpected and cute. Happy holidays to you!

Do-it-yourself New Year's wreath photo from toy ribbons.

New Year's wreath of marmalade.

New Year's wreath of green bows.

Christmas wreath made of yarn.

Christmas wreath of balls

New Year's wreath of orange peels.

New Year's wreath of marshmallows.

DIY Christmas wreath video