100 ways to lose weight 

How to make Christmas tree crafts out of cardboard. Glowing Christmas tree from garlands. Christmas trees from pots

Preparations for the New Year and Christmas holidays are in full swing. You need to choose gifts for family and friends, think over the menu and, of course, decorate the house! We have collected options for making small Christmas trees with our own hands from various materials. Such Christmas trees will be a wonderful decoration for your home, and they can also become an original addition to a New Year's gift.

Bright Christmas tree made of Christmas balls

  1. To make this Christmas tree, we need one spool of tape (or any other material), Christmas balls of different colors and diameters, a beautiful pencil (“trunk” of our Christmas tree), a sheet of colored paper, an asterisk or a bow as a top.
  2. We decorate our stand (in this case, a tape spool) by wrapping it with a piece of colored paper.

  3. In the center of the coil, if its hole is large enough, you can put a piece of cotton wool, and stick a pencil into it. The main thing is that nothing staggers, the base for the Christmas tree must be stable.

  4. We begin to string balls on a pencil. You can go from large to smaller, you can string them in a chaotic manner.

  5. On the sharp end of the pencil we string our top. In this example, a star was used, you can tie a bow with a suitable ribbon.

  6. Our bright Christmas tree made of Christmas balls is ready! Looks very elegant!

"Natural" Christmas tree

  1. This Christmas tree looks just like the real thing! It can be made in a variety of sizes - it all depends on the amount of time and patience you have. To make it, you will need corrugated paper, scissors, soft wire, ribbons and beads for decoration and a stand (you can use a cork if the size of the Christmas tree is not large).
  2. First, cut the corrugated paper into strips (the longer the better). Let's make a fringe on these strips (cuts on the paper not reaching its edges from one edge). Twist each strip of fringe tightly with your fingers. You should get a tape with needles, as in the photo.

  3. We take a piece of soft wire and twist our tape in a spiral on it.

  4. If you twist it tightly, then additional fixation of the tape is not even needed. It turns out here is such a beautiful Christmas tree "brush".

  5. Make several of these brushes of different sizes and attach to each other by twisting the ends of the wire. You should get some beautiful Christmas tree branches. Now it's up to the small - decide on the size and create!

  6. Make the required number of branches for your Christmas tree and fasten them to each other. The basis for your design can be a cork, a piece of wood or an ordinary jar filled with newspapers or cotton wool for fixing. Decorate it to your liking: beads, rain, ribbons and the Christmas tree is ready!

Christmas tree made of yarn

  1. This Christmas tree can be made in just a few minutes! For the manufacture you will need foam (we cut out the base for spruce from it). You can also make an ordinary cone from thick cardboard, yarn, beads, glue.
  2. We cover our cone (regardless of what it is made of) with glue. From the base of the spruce, we begin to twist the thread to the very top.
  3. We decorate the Christmas tree with beads.
  4. Anything can be used as a top: a New Year's ball, a bow, a ball of thread. In this example, a wire star was made.

  5. Experiment with decorations for Christmas trees, with their sizes and create compositions!

    If you liked this Christmas tree, then similar ones can be found in the article

coffee tree

  1. For this original Christmas tree, you will need coffee beans, a cone made of any material (cork, foam, thick cardboard), glue and decorations to your taste. First, let's make a cone for spruce.
  2. Lubricate the cone with glue (you can apply it dotted for each grain with a syringe) and fix the grains.

  3. You can glue beads between the grains, with them the Christmas tree will look more elegant.

  4. After you cover the entire cone with grains, you can additionally decorate the spruce with bows, ribbons, beads.
  5. This is what the finished coffee trees look like! By the way, instead of coffee beans, you can use beans.

ribbon tree

  1. Another proof of the phrase that "everything ingenious is simple"! This original Christmas tree can be made in just a few minutes from the most elementary materials. To make it, you will need a cone of any material (maybe ordinary thick cardboard), ribbons of small thickness, scissors, pins (possible with beads at the ends), glue.
  2. We cut our ribbons into identical stripes, as in the photo.

  3. We fold each of the strips in half and fasten with a pin (you can alternate ordinary pins with those with beads at the ends).

  4. We fix the resulting blanks to the very top.

  5. The top can be decorated with anything. In this case, a paper gift bow was used. The Christmas tree is ready!

Herringbone from tulle

  1. To make this Christmas tree, you will need tulle, a thread with a needle, a couple of beads for decoration. First, twist our wire from one end in any shape (this will be our top).



  2. We take several pieces of tulle and thread a thread through one edge, thereby creating folds like on a skirt.



  3. We fasten the skirt along the wire. The wire, in turn, can be further decorated by wrapping it with ribbon in a spiral, as in this example. Make as many of these “skirts as possible, from this the Christmas tree will only be more magnificent. You can use tulle in different sizes and colors.
  4. Decorate the Christmas tree with ribbons, beads and a beautiful delicate Christmas tree is ready!

Christmas tree made of polymer clay


Volumetric Christmas tree made of paper

  1. To create such a Christmas tree, you need plain paper, soft wire, scissors and a pencil. First you need to make a base of wire. We twist one of the ends in the form of a spiral, for the stability of the future structure.
  2. Draw a circle on a sheet of paper with marked lines, as in the template.

  3. We make cuts on the resulting circle, without affecting the area of ​​\u200b\u200bthe second circle (inside).

  4. We form “sharp corners” by gluing the ends of the resulting pieces.
  5. It turned out the first tier for the Christmas tree. Now we make a puncture in the middle and string it on our wire.
  6. We make several such tiers, gradually reducing the radius of the original circle-template.
  7. We close the top with a cone made of the same paper and a voluminous Christmas tree made of paper is ready!

Christmas trees made of paper


Time is running unnoticed. It would seem that quite recently they celebrated the New Year and celebrated Christmas, and it is already autumn outside the window. With the onset of the first cold weather, there is a desire to start preparing for the upcoming holidays, pleasing yourself and your loved ones with a small miracle. And first of all, the question arises of acquiring the most important attribute of the New Year - the Christmas tree. Without this fluffy beauty, the mood will not be the same at all. Yes, and the holiday will seem fake.

But the issue of acquiring a traditional tree can be approached creatively. Just connect your own imagination and ingenuity to create a fluffy beauty with your own hands, using useless materials that no one needs lying idle in the house.

What can you make a Christmas tree from? From anything! It's even better if you do it with your kids. They will also get great pleasure from this process.

What kind of Christmas tree can be made so that it will please your loved ones and guests, and also bring the feeling of a real holiday? There are a few tips you should know before you get started.

The first one concerns form. As a rule, Christmas trees are made in the form of a cone or an isosceles triangle. In this case, the form does not have to be correct. You can make a craft Christmas tree at an angle and with any number of tiers.

The next tip is about the color of your product. And it doesn't have to be green. You can make the Christmas tree craft white, yellow, silver, gold or even blue. Do not be afraid to deviate from the standard rules, because your fluffy beauty should be a real miracle.

A very important point in the work is the fastening of crafts. This will need to be thought through in advance. The details of the Christmas tree can be fastened with adhesive tape or glue, wire and other materials. At the same time, it should be taken into account that this will need to be done carefully and reliably, because the Christmas tree should please with its appearance and withstand throughout the holidays.

Particular attention should be paid to the top. According to tradition, this detail serves as a decoration for the dome of the spruce. For your tree, any toy, star, ball or just a curved spiral can be the top. It will be interesting to look at the decoration in the form of a symbol of the coming year or an angel.

Origami

What can you make a Christmas tree from? The easiest and fastest way to make is to use paper. In addition, made in miniature sizes, such a craft will be a wonderful New Year's toy.

To do this, you will need to prepare in advance all the materials necessary for work:
- sheets of paper that can be magazine, book or just blank;
- stapler;
- scissors;
- glue;
- glitter or spray paint;
- Ribbon or paper clip to hang crafts on the Christmas tree.

Getting started, all the leaves must be put in a pile and fastened with a stapler. Next, draw the outline of the Christmas tree with a pencil and cut it out. The next stage of work is to bend the leaves and color them with glitter glue or spray paint. The final touch is gluing a ribbon or attaching a paper clip.

The second manufacturing method is more troublesome. However, the beauty of the resulting crafts will certainly please you. So, for work you will need:
- book pages
- cardboard;
- glue;
- scissors;
- mini-toys, stars and ribbons to decorate the Christmas tree.

The first stage of work consists in making a cone-shaped cardboard base. Next, lay the leaves one on one and make cuts on them, but only on one side. After that, the entire base is glued. In this case, the uncut side of the paper is superimposed on the cone. To cover the top, you will need to make a "lid". That's all. The tree is ready. Now it can be covered with glitter or spray paint.

What can you make a Christmas tree for the competition of artificial green beauties? Instead of ordinary paper for making a tree, you can take corrugated paper. Such material will be a valuable find for a home designer. A Christmas tree made of corrugated paper will look unusual and very beautiful. She will certainly stand out among other crafts.

What can a tree be made of? The basis of your craft may not be a cardboard cone, but a tube. This part can be purchased at a hardware store or glued together from a few leftover toilet paper rolls. With this option, the cone is made of colored paper, attached to cardboard with adhesive tape. At the end of the work, the top of our Christmas tree will need to be decorated with a ribbon bow.

As a basis for making a New Year's beauty, you can take polystyrene foam. Strips of paper folded in the form of needles are attached to it.

The Christmas tree can also be made in the form of a panel. For such crafts, you will need to cut strips of paper, and then twist them into tubes of different lengths. Further, all the details are glued to the base in the form of a Christmas tree. The finished product is decorated as you wish.

What else can you make a Christmas tree from? From toilet paper. This option for making a New Year's beauty is the simplest and most economical. At the initial stage of work, a cone is constructed, the material for which is white cardboard. The dimensions of this part can be different and depend on the desired height of the final product. Next up is toilet paper. It should not have tear-off strips, that is, the cheapest option will do. Toilet paper should be folded lengthwise, and then, having gathered it, stick it on a cone from the base to the top, like an American skirt.

The strip must remain intact. The Christmas tree thus obtained should be decorated with green gouache. At this stage, children can be involved in the work.

What can be used to make a Christmas tree toy made of such a thin material? From the same toilet paper. Its piece should be rolled up in the form of a ball, coated with PVA glue, decorated and glued to the Christmas tree.

Crafts from cones

In order to bring joy to your family and friends, what can you do for the New Year? Christmas tree made of cones. For many, working with this natural material will be a real pleasure.

It is believed that they are among the most beautiful. In addition, this is one of the best options for those who are thinking about the following question: “What can I make a Christmas tree from for a homemade Christmas tree contest?”.

There are several options. The easiest and simplest of them involves creating a cone of the desired size and gluing cones on it. Work should start from the bottom, gradually moving to the top of the cone. What kind of Christmas tree toys can be made from cones? The finished craft is painted or decorated with bows, sweets, toys, tinsel, etc.

What can you make a Christmas tree from (see photo below)? The second way to make a New Year's beauty involves the use of not whole cones, but their scales.

The same cardboard cone will serve as the basis of such a Christmas tree. Scales of cones are glued to it from the bottom in a circle, which will play the role of needles. At the final stage of work, the Christmas tree is covered with green, silver or gold paint. As an additional decoration, glitter is glued to the tips of the needles.

The basis for a Christmas tree made of cones can be a cone cut out of foam. It will need to be painted in some dark color. For crafts, you will also need wire.

One end is wrapped around the tail of the cones, and the other is straightened. After the required number of such blanks has been made, they will need to be attached to the base. To do this, the free end of the wire is inserted into the foam.

Autumn version

What can you make a Christmas tree from? from dry leaves. To do this, the material prepared in the fall is glued to a paper cone, creating a wonderful tree. Such a Christmas tree will turn out from branches of walnut and cherry, holly and salal, ruscus, etc. Bay leaves are also suitable as green material.

There are two ways to make such a Christmas tree. The first of them involves gluing the leaves to a cardboard cone created in the right size. The crown of such a tree is formed from top to bottom. In this case, the leaves are glued to each other.

The next way to make an "autumn" Christmas tree is somewhat more complicated. At its first stage, a base is made in the form of an ordinary cardboard cone. Further, holes are pierced at the ends of the branches with leaves, through which a fishing line or thin twine is pulled. In this case, a kind of garland is obtained. This part is wrapped around a cone previously lubricated with glue.

New Year's beauty from pasta

What other Christmas tree can you make with your own hands? A New Year's pasta tree will look very original. Make it easy. In addition, today pasta is sold in various sizes and shapes, which will make the Christmas tree just fantastic.

The first stage of work is the manufacture of a cardboard case. The workpiece must be painted in the desired color. For this, acrylic paint, spray or gouache are used. Next, you should take pasta of different shapes and use PVA glue to glue them to the cone. At the same time, the design of a fabulous spruce should tell you your imagination.

Work should be continued until the pasta covers the entire body. After the glue dries, the finished Christmas tree needs to be painted in two layers.

Thick fabric tree

What can a tree be made of? Felt is sometimes used to create a New Year's beauty. This material perfectly holds its shape and does not crumble. Felt can be used instead of felt. For contrast, it is desirable to take the material in two different colors.

First of all, a cardboard cone is made. Next, circles of various diameters are cut out of the felt (from the smallest to the largest). Christmas tinsel is glued to the bottom of the cone with glue or double tape. After that, felt circles are strung on the blank of the tree, in which cuts are first made crosswise. Fabric parts are tightly put on the cone. The top of such a Christmas tree is decorated with a felt cap or tinsel, pre-lubricated with glue.

New Year's beauty from threads

You can make a "woolen" Christmas tree with your own hands. To do this, you need to recharge with a positive attitude and start creating beauty. The first step is to twist a sheet of paper or cardboard into a pyramid, fixing it along the contour with glue or tape. Next, take thick woolen threads (necessarily fluffy) and wind them in circles on the base from the bottom up. It is important that the product is neat and even.

Threads should not fit on the next row. For those who make such a Christmas tree for the first time, things may not work at first. There will definitely be “harmful” threads that will constantly peel off. How to get out of this situation? For convenience, the edge of the thread can be attached with a pin. After finishing work, a conditional garland should be placed on our Christmas tree. It is made from thin threads.

A small pompom will serve as a decoration for the top of the New Year's beauty. To make it, two circles with a diameter of 3 cm should be cut out of cardboard, in the center of which there is a hole of 1 cm. Threads are wound on the parts folded together. Then they are cut along the contour and tied up in the center.

What kind of Christmas tree toy can be made from threads? It is better to decorate such trees with multi-colored pins. Bright buttons of various diameters can also serve as decor.

Christmas tree from plastic bottles

Often in the house you can find unnecessary containers. If these are plastic bottles (preferably green) with a volume of 0.3 to 3 liters, then they can be used to create a Christmas tree.

At the first stage of making a New Year's tree, the bottom of our material should be carefully cut off. This can be done with a utility knife or scissors. You will need one of the largest bottom. It will serve as a basis for our product. The rest can be thrown away.

Next, the prepared bottles are cut into strips, the width of which is from 2 to 2.5 cm. The neck must be intact. As a result of the manipulations, a kind of plastic flower will be obtained.

At the next stage of making the Christmas tree, we cut each strip of the bottle again along the edge after 0.5 mm. These will be our Christmas tree needles. Small cuts will make the Christmas tree fluffier and more beautiful.

Next, the harvested branches should be strung on the "trunk". They will serve as a stick, the length of which should be equal to the intended height of the Christmas tree. Blanks from bottles of a larger volume should remain at the base, and containers of a smaller capacity should be strung up. We cover the top of the Christmas tree with a plastic cap, hammering a nail into it for reliability.

New Year's beauty from cups

What are the original Christmas trees made of? New Year's beauty can be made from plastic cups. This material should be green.

At the first stage, eight cups are laid out in a semicircle and fastened together with a stapler. This will be the first row of our product. Next, seven cups are laid out. This is the second row of the tree. The process goes on and on. Fewer and fewer cups fit into each row. Further, all the parts are fastened together and fixed with staplers. Collected in a circle and located one above one, they will become our Christmas tree. Next, the Christmas tree should be decorated. To do this, you can put a toy or a ball in each cup.

Feather Christmas Tree

Anyone who decides to make a New Year's beauty from this material does not need to gut old pillows. Feathers from them are not suitable for crafts. You can buy the necessary material only in special stores selling goods for needlework. This will be the first stage of work. Next, the feathers will need to be sorted by size and fluffed a little. This will make it easier to work with them in the future.

When using this light material, the decoration of the product must be done before it is formed. Small plastic beads are suitable for this. They can also be purchased at a craft store.

Beads are carefully glued to the very tips of the feathers. After drying, the resulting blanks are glued from the bottom up onto a cardboard cone. The result is fluffy, which, for greater resemblance to a real Christmas tree, can be decorated with artificial snow.

For stability, a cardboard circle can be glued to the base. A small hole is cut out in its middle, into which a cardboard tube painted brown is inserted.

Putting up a Christmas tree for the New Year is a good tradition supported by many families. But chopping a live spruce to enjoy the beauty of a forest beauty for just a few days is not very humane. Fortunately, recently people have begun to think more and more about this issue and make their choice in favor of artificial beauties that can brighten up the New Year holidays for more than one year.

To get the main attribute of the New Year into your home, it is not necessary to buy a Christmas tree. It will be much more interesting to make it with your own hands, especially if there is no free space for a big fluffy beauty or there is an active baby in the house. Moreover, similar handmade Christmas trees- a great gift for the New Year.

If you choose colorful magazine pages, you get a bright Christmas tree that can be put in a nursery.

To make an original Christmas tree from pieces of a magazine, you will need:

  • old magazine (a book with bright pictures, glossy posters, etc.);
  • a thick sheet of paper or cardboard;
  • PVA glue (it is better to take a glue gun);
  • pencil;
  • scissors (much more convenient to take a shaped hole punch).

Step 1. From a thick sheet of paper, make a cone, fixing the edges with glue.

Step 2 Take magazine pages with bright pictures and cut out many identical circles. If there is a shaped hole punch, it will be much more beautiful if you use it.

Step 3 To make the cut out circles twirl a little, wrap them around a pencil for a while.

Step 4 It's time to start assembling your Christmas tree. Starting at the base of the cone, glue it in a circle with bright swirling circles. Try to make neat rows, glue the circles tightly so that there are no holes.

Step 5 From one of the circles make a small cone and put it on the peak.


Do-it-yourself fragrant Christmas tree from dried citrus fruits and cones

Such a Christmas tree will favorably decorate any interior, and a delicate aroma will create a festive mood.

To make a fragrant Christmas tree you will need:

  • a sheet of thick paper or cardboard;
  • dried slices of lemon or orange;
  • cones;
  • puncture;
  • glue gun.

Step 1. Make a cone out of cardboard or thick paper. You can make several cones of different sizes at once.

Step 2 Prepare and dry citrus slices. Prepare the cones.

Step 3 Stick dried lemon or orange circles and cones on the cone. You can make a separate citrus Christmas tree, a separate Christmas tree from cones, but it’s better to combine the ingredients and you get a lemon-cone Christmas tree.

Step 4 Twist a star from the wire and attach it to the "crown" of the Christmas tree.

A wonderful fragrant Christmas tree is ready!


Christmas trees from wrapping paper

You can decorate the house with such Christmas trees, supply them to a group in kindergarten, and also present them to the teacher on the eve of the New Year holidays.

To make a Christmas tree from bright wrapping paper, you will need:

  • a large sheet of cardboard or thick paper;
  • wrapping;
  • double-sided tape and regular tape;
  • scissors;
  • small jewelry (beads, beads, sequins, sequins, ribbons, etc.).

Step 1. Make a cone out of cardboard. If the wrapping paper is thick enough, then the cone can be made immediately from it.

1.1. Fold the paper diagonally to make a cone.

1.2. Secure the resulting cone with tape.

1.3. Carefully cut off the excess paper at the base of your cone.

Step 2 Take bright wrapping paper and cover the cone.

2.1. Lay the wrapping paper face down on the table. Tape the end of the colorful paper to the top of the cone with tape.

2.2. While slowly turning the cone, wrap it tightly in wrapping paper.

2.3. Attach double-sided tape to the edges of the paper and connect the end to the cone. Cut off the excess at the base so that the "bottom" is even.

Step 3 Decorate the Christmas tree however you like.

Creative Christmas tree is ready!


Do-it-yourself Christmas tree made of felt

A soft and delicate Christmas tree made of fabric can be presented as a New Year's gift to a colleague, girlfriend or relative.

To make a Christmas tree from felt, you will need:

  • felt (it is better to take felt of two or more colors in the same range so that the Christmas tree looks prettier);
  • cardboard;
  • double-sided tape or glue;
  • scissors.

Step 1. Make a narrow cone out of cardboard, securing it with glue or tape.

Step 2 Now take the felt and scissors cut out circles of different diameters in ascending order. It is better to use pre-prepared cardboard circles as templates.

Step 3 Attach Christmas tinsel to the base of the cone with glue or tape.

Step 4 Make a criss-cross cut in the center of each circle of felt.

Step 5 Sequentially put the circles on the cone to the very top.

Step 6 To decorate the "top" of the Christmas tree, add tinsel, attach a star or a pre-prepared felt cone with decoration at the very peak.

A cute cozy Christmas tree is ready!

Glowing creative Christmas tree with your own hands.

Such a Christmas tree will be a wonderful night light for your baby during the New Year holidays. It can also be placed on the windowsill, which will give a special originality to the interior of your home.

To make a glowing Christmas tree you will need:

  • floristic (flower) mesh (it is better to take a mesh of several shades of green);
  • floral wire;
  • cardboard or thick paper;
  • scissors;
  • cellophane
  • PVA glue;
  • pins;
  • Christmas tree garland with small bulbs;
  • additional decorations (optional).

Step 1. Roll up a cardboard cone.

Step 2 From above, the cone must be wrapped with cellophane.

Step 3 In a deep container, make a solution of a small amount of water and PVA glue.

Step 4 Dip small pieces of floral mesh into the solution and stick them on the cone. Joints can be coated with glue additionally.

Step 5 Reinforce the structure with pins and wait until the first layer is completely dry.

Step 6 In the same way, make the second layer of the future creative Christmas tree.

Step 7 After drying, you need to remove the Christmas tree from the cone and remove the cellophane.

Step 8 Place a garland inside the Christmas tree, securing it with floral wire.

A wonderful luminous Christmas tree is ready! It remains only to decorate the Christmas tree to your taste.

Christmas tree made of pasta

You can make such an interesting Christmas tree with your child. A fascinating activity will also be useful for fine motor skills of fingers.

To make a Christmas tree from pasta, you will need:

  • foam or plastic cone (you can make a cone from thick paper or cardboard);
  • pasta (various shapes and sizes);
  • dye;
  • PVA glue;
  • tassel.

Step 1. Prepare the cone and paint it any color you like.

Step 2 After the cone dries, you can start gluing pasta in any desired design.

Step 3 After all the pasta has been applied, they can be carefully painted, preferably in two layers.

Christmas tree of pasta is ready! Every grandmother will be delighted with such a sincere gift from her beloved grandson or granddaughter.

DIY colorful paper Christmas tree

A paper Christmas tree will decorate any workplace and create a festive mood for everyone who is lucky enough to see it.

To make a Christmas tree out of paper, you will need:

  • long skewer;
  • colored colorful cardboard or design paper;
  • thick cardboard;
  • glue gun or glue moment.

Step 1. From thick cardboard, cut out a square base for the future Christmas tree.

Step 2 Use glue to fix the skewer in the base.

Step 3 From designer paper or colored cardboard, you need to cut out circles (preferably with curly edges) of different diameters, 3 circles for each diameter.

Step 4 Make small holes in the center of each circle.

Step 5 Lubricating the holes in the circles with glue, gradually assemble the Christmas tree.

Step 6 Decorate the top of the finished Christmas tree with a paper star or any other beautiful detail.


New Year's cozy Christmas tree made of thread

Lovely fluffy Christmas trees made of yarn will give a lot of warm pleasant impressions.

To make a Christmas tree from a thread, you will need:

  • cardboard for a cone or ready-made foam cone;
  • pile yarn;
  • thick yarn;
  • miniature pins;
  • decorations.

Step 1. Prepare a pre-purchased styrofoam cone or make a cardboard cone.

Step 2 Take two threads at once and fasten the ends with pins at the very base of the cone.

Step 3 Wind the threads around the base of the cone, securing with pins about every 5 cm.

Step 4 Wind the threads towards the top of the cone, after a full circle at the base, you can no longer fasten the threads with pins.

Step 5 When you get to the top, fasten the threads and wrap the cone already in the downward direction, covering the Christmas tree with a second layer of threads.

Step 6 Cut off the ends of the threads at the base and secure them with pins.

The Christmas tree is ready! You can leave it in this form, but it is better, nevertheless, to decorate the Christmas tree with various beads, beads and other decorative elements.


Creative Christmas tree made of corrugated paper

If you want something unusual, you can make a huge Christmas tree on the wall.

To make a Christmas tree from corrugated paper, you will need:

  • matte cardboard or foam base;
  • corrugated paper;
  • scissors;
  • masking tape;
  • stationery knife;
  • PVA glue;
  • marker.

Step 1. Lay the cardboard on the floor and, using duct tape, connect all the sheets to get a large rectangle. I used black tape in the photo, but white tape is better (painting tape works best).

Step 2 Draw the size of your future Christmas tree and using a clerical knife, cut out a large triangle.

Step 3 Fold the crepe paper in half and cut the fringe with scissors.

Step 4 Glue the fringe carefully, starting at the base of the tree and all the way to the top, leaving no gaps.

Step 5 Make a barrel out of a rectangle of brown paper or cardboard. You can decorate the trunk with a fringe of brown corrugated paper.

The tree is ready! You can hang it on the wall and decorate as you wish. It turned out to be a wonderful photo zone for New Year's photos.

What kind of New Year can be imagined without the main symbol - the Christmas tree. Green beauties on the eve of the holiday are sold at every corner. However, for such a holiday it is not necessary to buy a live spruce. Try to make it yourself. Therefore, in this article we will talk about what you can make a Christmas tree from for the New Year holiday. It is worth saying that you can create the main symbol of the new year from completely different materials. And today we will talk about it in more detail.

Mini Christmas trees from cones.

If your children are just as fond of making crafts as you are, then they can also participate in the creation of such crafts. The next craft - a Christmas tree - consists of cones and plasticine. All your child needs is to learn how to roll small balls out of plasticine. At the same time, for this purpose, you can use plasticine of the brightest shades. As a base for a Christmas tree, you can use ordinary thread spools. But you have to wrap them in foil. The cones are attached to the coil with super glue.

If you like the next Christmas tree, then take acrylic paints and paint the bump with it. Remember that it is most reasonable to use green paint here. In this case, the tips of the Christmas tree are painted white with paint. Make a base for a Christmas tree from brown plasticine. Use an asterisk for decoration.

The next craft is a little more difficult to do. Here it is worth using beads. Therefore, if your child is small, then control this process yourself. Glue the beads to the cone with a glue gun.

All the above crafts from cones can not only decorate your home. It will be nice to present such Christmas trees as a gift to your loved one.

The next craft looks more voluminous. And to create it, you need a few cones. As a basis here, you should use a cardboard cone. After that, the cone is glued with cones on all sides. In this work, it is customary to use a cool gun. As soon as the glue dries, glue the Christmas tree with large beads.

Simple tinsel Christmas trees.

If you read this article, you will be able to learn how to make an artificial Christmas tree at home. Above, we offered you ideas for Christmas trees that were made from cones. Now we suggest using tinsel for this work. Naturally, for such a craft, you must purchase the tinsel itself. For Christmas trees, make cardboard cones. Then, glue the tinsel to them. In this case, the tinsel should be glued to the cone in a spiral. While working, arm yourself with a glue gun.

Candy Christmas tree.

The next Christmas tree can be not only a beautiful decoration, but also a very nice gift. To make such a craft, make a cone. Fix the candy on it with adhesive tape, and then wrap the Christmas tree with tinsel.

A simple and voluminous Christmas tree made of paper.

The next craft is also very easy to make. It can be a great decoration for a child's room during the New Year holidays. For manufacturing, prepare:

  • thick green cardboard
  • markers, glitter, paints,
  • scissors and glue
  • scotch.

Progress:

  1. We bend a sheet of cardboard in half and cut along the fold with scissors.
  2. We put the two parts that you have turned together together and bend in half again.
  3. Opposite the fold, using a marker, draw a half of the Christmas tree.
  4. Now cut along the drawn line. As a result, you will get 2 trees that will not differ from each other in any way.
  5. Gently bend each tree in half. Mark the center.
  6. Next, make an incision on one of the trees. The incision should be long from the very top to the midline. On the other tree, the cut should be from the bottom to the middle.
  7. Now we connect the Christmas trees by inserting them into the resulting cuts.
  8. And to make the tree more stable, use adhesive tape.
  9. That's all, now proceed to decorate your Christmas tree. Use your imagination and handy materials here.




And here is another version of the Christmas tree, which you can do in the same way from an old cardboard box.

Elegant Christmas tree made of paper.

If you want to know how to make a Christmas tree beautifully, then the following idea was created especially for you. For such a Christmas tree, prepare:

  • colored paper,
  • scotch,
  • glue and scissors.

The most difficult thing is to cut strips of colored paper, which must have the same length and width. In addition, each strip must be glued with adhesive tape in order to get a loop. After that, all the loops are glued to a strip of adhesive tape.

You should wrap a cone of thick cardboard with similar garlands.

How to make a glowing Christmas tree.

If you have decided to learn how to make a Christmas tree with your own hands, then you are on the right track. Above we have described some simple crafts. Now it's the turn of serious creativity in order to do something original.

For a creative Christmas tree, prepare:

  • Flower floristic sphere. For this case, we recommend buying more than one shade of green.
  • Scissors, PVA glue.
  • Thick cardboard for the cone.
  • Cellophane, pins, garland, floral wire.
  • Various decorations.

Progress:

  1. First, we make a cone from cardboard.
  2. We wrap the cone with cellophane.
  3. In a container, dilute the glue with water.
  4. We cut the floristic mesh into pieces and lower each piece into containers with glue and water.
  5. Now stick the segments on the cone. At the same time, the joints are glued again for reliability.
  6. Use pins to keep your craft from coming apart at the seams.
  7. As a result, you have the first layer of the Christmas tree. Make the second layer in the same way. Remember that after gluing the second layer, the structure should dry well.
  8. If the glue is dry, remove your Christmas tree from the cone.
  9. A garland is placed inside the Christmas tree.
  10. Now just decorate the Christmas tree as you wish.

Tree of threads.

If you want to have something unusual for the New Year in your house, then in addition to standard decorations, decorate your house with various New Year-themed crafts.

The creation of the next Christmas tree is also quite easy to handle. Take a sheet of drawing paper and make a cone out of it. Coat the cone with glue and start wrapping it with green thread.

When the glue dries, separate the cone from the paper.

Decorate the finished Christmas tree with various accessories. Ornaments are also glued to the Christmas tree with glue.

Finally

Spend your New Year bright! Make a variety of different Christmas trees that can make the atmosphere in your home truly magical.

Guys, we put our soul into the site. Thanks for that
for discovering this beauty. Thanks for the inspiration and goosebumps.
Join us at Facebook and In contact with

There is very little time left before the New Year, and it would be time to think about holiday decorations for the house. You can buy ready-made options in the store, but it is much better to make original things with your own hands.

We are in website We believe that children should definitely be involved in this business, and we have collected great ideas for New Year's crafts.

sock snowman

From unnecessary socks you get such funny snowmen. You will need socks, rice for stuffing, some scraps and buttons. Cut off the toe at the sock, and on the other hand, tie it with a thread. Pour in the rice, giving it a round shape, pull the thread again and pour in more rice, forming a smaller ball. Sew on the eyes and nose, make a scrap scarf, sew on the buttons. And from the cut off part you get a great hat.

Christmas tree pendants

A cinnamon stick is taken as the basis, several artificial spruce branches and multi-colored buttons are attached to it with glue. Such Christmas trees will not only decorate the house, but also fill it with the warming aroma of cinnamon.

Cork deer

Bottle caps are great craft material. For example, you can make such a cute deer. You will need some corks, glue and various beads to decorate. This is not ashamed to hang on the Christmas tree.

stick crafts

From ordinary ice cream sticks, cute Christmas trees, snowmen and snowflakes are obtained. You need paint, glitter, buttons and a little imagination. Even the smallest children can cope with such crafts.

Christmas trees made of colored paper

These wonderful Christmas trees can be made by making a cone of green paper or cardboard and decorating it with various little things. Buttons, pebbles, beads and various paper figures will do.

potato drawings

Snowflakes from pasta

Fasten pasta of various shapes with glue and cover with silver paint, fasten the ribbon - an unusual New Year's snowflake is ready.

Snowmen from covers

Cover the metal bottle caps with white paint (it is better to take acrylic) and glue them together, as shown in the picture. Draw a face for the snowman and decorate with a scarf from a bright ribbon. If you glue a loop on top of it, then the snowman can be hung on a Christmas tree.

Crafts from cones

From the cones you can make different animals and any other characters. You will need paints, shreds, buttons and, of course, imagination and inspiration.

Christmas tree made of buttons

Pick up green buttons of different diameters and a few brown ones for the trunk and secure them with a thick thread. Decorate the crown with an asterisk.

painted balls

Place the pieces of wax crayons in a transparent Christmas ball, heat it with a hair dryer, constantly twisting it. Melting, the pencils will leave beautiful colored stains inside the ball.