How to properly narrow down jeans. How to sew jeans. How to shrink jeans at the waist without a sewing machine

05.03.2023

Often, purchased clothes do not sit on the figure as well as we would like. This happens due to the fact that any item of clothing, including trousers, is sewn according to certain standards. Then a reasonable question arises - is it possible to sew in jeans so that they look perfect. It is possible, but it will take a little effort.

How to sew pants down a size

Many women's things gather dust in the closet because of the likelihood of their owner's rapid weight loss. Often clothes become large, but they like it so much that you want to alter it and continue to wear it. Before you make your jeans a size smaller, try them on and see if they are big everywhere. It happens that the pants are too big in the waist, but still sit tight in the hips. If the trousers everywhere have become larger in size, then you can get to work:

Before sewing in jeans, make sure you have a sewing machine in your arsenal and know how to use it.
When trying on, pin the excess fabric with pins, remove carefully.
Lightly go over the pin marks with chalk, moving away a little from the measurements.
Spread the seams on one leg and, cutting off the excess, sweep the edges.
Do the same with the second leg.
Sew the hand seams with a sewing machine. If there was a double stitch in the original, duplicate it.
In the hip area, the actions will be the same, but before sewing, you will need to cut off the belt. At the final stage, shorten it and sew it back.

How to sew trousers at the waist

There are many styles of jeans. They are worn from very narrowed models, designed for very slender people, to straight wide ones. To answer the question of how to properly sew in jeans, in addition to the style, you also need to determine the purpose for which the size is adjusted. Let's say your pants have a straight cut of medium width, and they are too big at the waist. To remake these jeans for yourself, follow this algorithm:

Step back from the middle seam at the back by 7 cm in both directions and at this distance unfasten the belt.
Next, you need to space the crotch by about 8 cm.
Open the middle seam too.
Poke pins from the wrong side, showing the places of sewing.
Sew along the marked lines, duplicating the double stitch if necessary.
Cut off the excess length on the belt and sew it on.

How to narrow down jeans at home

When buying flared denim trousers, be prepared that in a short time the once fashionable item of clothing will be completely out of demand. This model is not suitable for everyone and is often bought only for the sake of current trends. And this applies not only to women, but also to the representatives of the stronger sex. So that the thing does not disappear, you can give it a second life. How to narrow men's jeans and transform a woman's trousers is easy to understand from the description:

Before you take in your jeans, take a look at your figure and think about whether pants that are very narrow at the bottom will suit you. Ingoda it is better to limit yourself to a moderate width of the trousers.
Turn the jeans inside out, draw a new sewing line with chalk parallel to the original seam. Pin up the pins and try on. The thing should not only sit beautifully, but also be comfortable. If necessary, adjust the bottom length before narrowing.
Stitch the seams, gradually removing the pins. Trim off unwanted fabric.

Jeans are sewn according to established standards, so they look less attractive on girls with an imperfect figure. Although there are separate collections for girls with a non-standard figure, this cannot completely solve the problem.

If the figure only slightly deviates from the generally accepted parameters, then you can purchase the model of jeans you like and take it in a little. This process is quite simple, so you can do it yourself at home.

Is it possible to go down a size or two?

Over time, your favorite jeans lose their shape, stretch. But do not say goodbye to them, because at home you can reduce them by a size or even two.

To sew jeans on your own at home, you need to prepare a sewing machine, a centimeter, threads, needles, scissors and pins. Stock up on free time.

If your jeans look great on you, but are a bit big at the waist, then you can fix the situation by sewing them in at the back seam and at the waist.

If your favorite model has become a little loose, then it is worth stitching only along the side seams. To make a narrower bottom, it is worth taking in jeans along the inside seams.

Many girls have a wide hip area and a thin waist, so any pair of jeans will be loose in the waist. To solve this problem, jeans should be sutured in one of two ways.

The first way is the easiest:

First you need to make a few darts along the belt line.
Next, you need to carefully cut off a few centimeters of the belt.
Carefully stitch all tucks.
Cut off the extra centimeters on the belt, and then sew it back.
It is necessary to be extremely careful when creating a tuck in the buttock area, as very long seams will pull them up.

The second way is more complicated, but of high quality:

First you need to open the loop, which is located at the back in the center. In some models, it is necessary to eliminate three belt loops at once. If the company label is located nearby, it should also be removed.
Carefully rip the belt open, but only ten centimeters to the left and right of the middle seam of the product.
Then you need to pay attention to the step seam, and make it a spacer by eight or nine centimeters.
The remaining threads should be removed, and all seams should be ironed thoroughly.
The middle seam must be secured on the front side with pins to avoid possible displacement. Next, transfer the fastening with pins to the wrong side and steam with an iron.
Fold the legs together and draw a line at a slight angle about two centimeters apart.
The drawn line must be stitched, and the edges of the fabric overcast.
Turn the jeans right side out and sew two stitches down the center.
Go to the wrong side again to sew up the crotch, and on the front side, finish the double line.
The belt must be attached to the new waist size and cut off extra centimeters, but remember about allowances.
Next, the product must be folded in half, right sides inward, stitched and unfolded before ironing.
Fasten the belt and the main part of the product with pins and sew the belt loop back.

To reduce the size of jeans in the hips, they should be sutured along the side seams.

To calculate the distance to be removed, you can use one of the following methods:

Turn jeans inside out and put on. Use pins to mark the new seam.
Take trousers that fit your figure, attach to them those that you want to sew in and draw a line.

The process of reducing the volume of pants in the hips occurs in several stages:

First you need to cut off the belt.
Next, open the legs on the sides and stitch them along the new seams.
Cut off the excess material sentiments, and overcast the sides.
Sew the belt in place.

If the jeans are spacious at the hips and at the waist, then the belt should not be steamed. The legs must be ripped completely and carefully stitched to new sizes.

For thin denim jeans, you can make tucks on the sides, then the model will sit better on the figure.

We alter the flare into a narrow model

Very often, some jeans models become a thing of the past, and new styles come to replace them. More recently, every fashionista had flared jeans in her wardrobe, but now they have been replaced by narrow models. Do not part with your favorite jeans, because they can be altered.

To sew jeans in your legs, you must do the following:

Turn jeans inside out and try them on.
With pins, mark the line for the new seam, but you need to take into account one centimeter, which will shrink the product after washing.
Jeans must be removed, laid out on a horizontal surface and ripped from the knee down.
Carefully make throwing seams along the line marked with pins, and put it on again for trying on.
Cut off excess fabric.
On a sewing machine, make strong seams on metal.
For processing the edges, you can use a zigzag or overlock.

Inexperienced needlewomen should not completely steam out the legs, as the crotch area is very difficult to properly sew up.
When choosing threads, it is worth giving preference to threads for sewing jeans, although they can also be replaced with ordinary ones.
All seams must be double stitched for durability.
Do not rush to cut the threads. The securing seam must have stitches.

Copying site materials is possible only if you set an active link to our site.

How to narrow down jeans from the bottom at home? Pair of movements up to the fashion trend

Favorite trousers are no longer fashionable, but how to narrow jeans from the bottom at home? The creativity of our girls is preserved at the genetic level. Now it is hard to imagine that mothers and grandmothers were their own designers, completely creating or altering the wardrobe. Masterfully designing dresses and suits, assembling real masterpieces from cuts.

Inspired by models worn to holes, magazines, they did not sleep at night in order to have time to finish the outfit. Today you can safely buy any thing you like in the store, very convenient, but incredibly boring. From time to time, everyone has an irresistible desire, if not to sew, then to transform ready-made clothes for sure. Therefore, it will not be difficult to turn any, but outdated trousers into the hit of the season.

In order not to spoil the trousers with amateurish experiments, trying to cut off the excess with nail scissors, measuring unnecessary centimeters by eye, and after the work done, not to send the material for recycling, it is important to follow the basics of sewing. First you need to collect a list of basic tools:

iron and board;

The last point is not always feasible, so you can do without special equipment. Do not buy a high-quality professional machine just because of the pants.

It takes about an hour of painstaking work to turn old trousers into new ones. For 5 minutes, with a wave of a thread and a needle, it will not work to do a quality job. Therefore, you need to be patient and start the process:

to begin with, carefully rip the bottom of the product, it is convenient to use a special device that looks like a miniature can opener, but you can do without it thanks to nail scissors with elongated thin blades;

If you plan to wear jeans, tucking them down, you can simply iron them, fixing the desired position. It is better for the durability of the product to still complete the work so that the threads do not turn into a fringe. It is performed using a slightly different technology than the side seams:

leave an allowance from the end of 3-4 cm and mark a line with chalk, this length is explained by processing with a seam in a hem;

You can narrow jeans in absolutely different ways, choosing a stylish option from a variety. Depending on the initial fit and the quality of the material, it is easy to obtain the following models:

chinos - stylish trousers, create a somewhat casual look, medium fit, casual baggy creates folds on the hips, the lines are almost even, a slight smooth blending towards the center starts just below the knee, and continues to the ankle, usually tucked at the bottom, a great way to bring the pants back to life, which, after losing weight, are kept only with the help of a belt;

Modern girls live in a constant mode of losing weight, while sometimes they also manage to gain appetizing forms. After all the metamorphoses, the wardrobe is subjected to the strictest criticism; a harsh sentence cannot be avoided for your favorite things. How to narrow down jeans from the bottom at home to get a stylish update? It is enough to own a needle and thread, having spent the evening on sewing work. And you can not stop there, decorate with stripes and appliqués or make a couple of textured scuffs.

live internet live internet

Large Visitor Globe

Delicious cooking (316)
Meat and poultry dishes (30)
Dough dishes (34)
Goodies different (38)
Second courses different (35)
Dessert, chocolate (48)
Blanks (21)
Drinks (30)
About products (46)
Salads, snacks (34)
Embroidery (45)
Crochet (178)
Crochet accessories (26)
Crochet patterns (36)
Crochet differences (27)
Crochet techniques (37)
Crochet patterns (22)
Crochet flowers (30)
Knitting original (35)
Knitting (938)
Bolero, knitted jackets (31)
Knitted mittens (29)
Knitted hats (47)
Knitted hats1 (41)
Knitted jackets (43)
Jackets, knitted coats (36)
Vests, knitted tops (45)
Private (15)
Knitting needles for men (38)
Knitting set (47)
Capes, shawls (41)
Knitted socks (47)
Dresses, knitted skirts (48)
Plaids, pillows knitting (27)
Usefulness for knitting (42)
Knitted pullovers (50)
Knitted pullovers1 (33)
Differences knitting needles (41)
Raglan, knitted neckline (24)
Knitting techniques (43)
Patterns in magazines (23)
Knitting patterns (31)
Color knitting (39)
Scarves, knitted snoods (42)
Knitting for children (275)
Knitted sweaters for girls (40)
Knitted clothes for children (41)
Knitting accessories for children (14)
Knitted baby hats (42)
Children's dress, coat (38)
Knitting needles for children up to a year (35)
Magazines - knitting for children (40)
Sabrina for children, baby (24)
Wardrobe (39)
Literacy (85)
Spelling (41)
Russian alphabet (29)
Russian lessons (15)
Dacha (41)
For kids (22)
Ancient Rus' (30)
Spirituality (109)
Spiritual practices (30)
Wisdom (38)
Self-knowledge (41)
Magazines and books (488)
Burda (7)
Felice, Filati (14)
Knit & Mode (32)
Sandra (25)
Susanna1 (9)
Susanna2 (40)
Verena (28)
Knitting is your hobby1 (15)
Knitting is your hobby2015-16 (39)
Knitting is your hobby2017 (20)
Knitting is fashionable and simple (8)
Knitting magazines (45)
Irene (17)
Knitting books (40)
Literature on needlework (22)
Little Diana (22)
Sabrina1 (35)
Sabrina2016-17 (25)
Japan + Hitomi Shida (45)
Health (120)
Diagnostics, points (45)
Healthy body (33)
Medicines (30)
Youth (12)
Zodiac signs, names (23)
Interesting (124)
Interesting (47)
History (43)
World around (34)
Internet (47)
Art (97)
Painting (24)
Art miscellaneous (27)
Drawing, stencils (46)
Body beauty (37)
Crystals, stones (25)
Treatment of diseases (206)
Head (36)
Belly (22)
Nails, calluses, bones (10)
Oncology (11)
Spine, joints (26)
Cold (15)
Wounds, burns, skin (23)
Plants for health (13)
Heart, vessels, blood (20)
Solyanka recipes (30)
Magic (38)
Numerology, astrology (37)
Society (35)
DIY crafts (278)
Toys (42)
Plastic (17)
Weaving miscellaneous (37)
Cardboard crafts (31)
Crafts different (43)
Fabric crafts (34)
Miscellaneous paper (43)
Jewelry (31)
Useful tips (129)
Kitchen secrets (17)
Solyanka of usefulness (37)
Technique (22)
Care of things (27)
Cleanliness in the house (26)
Prose, poetry (39)
Psychology (44)
Religion (27)
Repair, furniture (36)
Russia (44)
Stepanova Natalia (4)
Bags (106)
Knitted bags, different (39)
Leather bags (26)
Fabric bags (41)
Tourism (34)
Photo, video editor (24)
Ribbon flowers, fabrics (48)
Flowers different (17)
Sewing clothes (160)
We sew accessories (22)
We sew hats (21)
We sew for children (33)
We sew dresses, blouses (32)
We sew different (21)
We sew skirts (31)
Sewing alterations (268)
Appliques, patchwork ideas (39)
Jeansmania (26)
Leather, fur (23)
Patchwork MK (43)
Sewing trivia (31)
We sew pillows (45)
We sew textiles (34)
We sew-remake (27)
Sewing lessons (40)
Esoteric (100)
Unknown (39)
Channelings (27)
Esoteric_ (34)
Economics, law (45)
Humor (33)

— Diary search

— Statistics

How to narrow jeans and make them fashionable?

As you know, our figure is prone to change, we can lose weight or gain weight. But the things that we wear, unfortunately, do not change. When our figure changes, we have to go to the store and update our wardrobe, which leads to additional costs. Or, for example, you are tired of your favorite jeans and want to change their style, make them more fashionable. Then you can give the jeans for alteration in the studio, but at the same time you will have to pay the master for the work. There is another option - to alter jeans with your own hands.

Iron and ironing board

Special pad or block-sleeve

Threads in the color of jeans

Threads in the color of the finishing stitch

Machine needle No. 100

Ruler or measuring tape

First you need to rip the bottom of the jeans, as the bottom of the jeans will also be narrowed.

Then iron the bottom seam allowances with a steam iron so that there are no creases.

At the same time, iron the inner seams (step seams) on both legs.

After the legs were ironed, I took my old denim leggings (the model of which suited me) and traced the desired shape of the jeans over them.

Then she folded the legs in half and transferred the chalk line to the second leg with the help of tailor's pins. Connect with chalk lines the places of chipping with pins from the side of the second leg.

Remove the pins and machine stitch along the chalk lines on both legs with threads in the color of the fabric. Next, grind an allowance of 1.5 cm on the legs from the stitching line with a ruler or centimeter tape and cut off the excess with scissors.

Sew over the allowances on the overlock with threads in the color of the fabric from the side of the front halves of the legs. Iron the treated seams with an iron on the back halves of the legs. To do this, you can use a special sleeve block, which is included with the ironing board, or a special pillow that you can make yourself.

To process the bottom of the jeans, for this we align the lower sections on the legs. The bottom of the jeans will be processed with a seam in a hem with a closed cut, so we outline the allowances along the bottom of 3.0-4.0 cm.

We select threads for processing the bottom in the color of the finishing line. We bend the bottom along the chalk line, sew on the front side with finishing threads, stitch width 0.4 cm.

I made a video on how to properly hem jeans.

After the bottom of both trousers has been processed, it is necessary to iron the finishing line with an iron, using a pad or sleeve block. Here's what should happen.

Do-it-yourself fashionable leggings are ready! As you yourself saw, there is nothing complicated in how to sew in jeans. It just takes a little effort, time and desire. Thanks to this, if not new, but fashionable jeans will appear in your wardrobe. Why throw away old jeans if you can give them a second life, and a good mood and a lot of new ideas.

Part 25 - How to narrow jeans and make them fashionable?

It is safe to say that fashion changes almost daily. But not every person can keep up with her trends, because a rare wallet can withstand it. However, you can solve this problem simply by using your hands. This article will show you how to sew in trousers and turn them into trendy new panties.

We sew in flared trousers: preparation

First of all, let's figure out which bottom is flared (after all, no one wears a similar style of pants), and make them classic. To do this, turn the product on the wrong side and lay it out on a flat surface. Next, you need to decide on the width of the trouser leg itself. This is important, because it is this width that will be the bottom of the trousers. The next step: you need to draw lines with sewing chalk (or a thin remnant) on the leg from the wrong side, which indicate the place of the seam. This must be done carefully, evenly and as accurately as possible. Further along this line, the legs are fastened with pins or simply swept away. The unnecessary edge of the trousers is cut off about a centimeter from the seam.

Working on a typewriter

Now about how to sew trousers on a sewing machine. First of all, you need to lay a line along the drawn line, while setting the stitch length as desired. Next, wrap the seam allowance. You can do this in different ways:

The seams can be laid out and wrapped around each separately, or they can be folded and processed together, it depends on the style of the trousers and the thickness of the fabric.
As for the overlock itself, if there is no such device, you can handle it with a conventional sewing machine. And here again there are two simple options for how to do this:

with the help of a special one that is in all new cars;
using the zigzag stitch, while setting the smallest step width.

The last, no less important stage is to iron the finished product. After steaming, the line drawn in chalk will disappear. Pants are ready!

Making tight pants

Today, pants that are narrower at the bottom are fashionable. Of course, you can buy them, but you can do it more cunningly - create such beauty with your own hands. Now we will talk about how to sew in trousers at the bottom and make them narrower. To turn everything right, you need to perform a few very simple steps, similar to the previous ones:

First of all, you need to unpick the hem of the bottom in order to work with the entire length of the leg.
At this stage, it is important to decide on how many centimeters the trousers will be sutured, because the method of suturing depends on this.
If you need to narrow your pants quite a bit, you can do this only on one side - external or internal, depending on where it is easier to work with a seam (sometimes it is decorative on one side, and it is very difficult to imitate it at home).
The principle of operation is the same as described above: you need to turn the product inside out, draw a seam line with soap (on one side), fasten the legs (with pins or basting), cut off excess fabric, stitch, wrap the edges.
So that the trousers, narrowed down to a considerable width, are not distorted, it is necessary to sew in on both sides. The principle of operation is similar, however, the lines are outlined near both seams, internal and external, and always at an equal distance. This is important, because otherwise the pants will look ugly.
Bottom hemming. You can lay a line or in the same place. However, somewhat cropped trousers (on the bone) are in fashion today, why not make your tight trousers just like that?
The last stage is ironing the product.

Belt: method one

Information on how to sew trousers at the waist by a couple of centimeters will also be very useful. First of all, it is imperative to decide on how much you need to reduce the product. Then, on the sides, you need to unpick the belt so as to make small tucks (their size depends on how many cm the product will be reduced). The bottom of the darts will go into the side seams. The next step: we outline the tucks, sew them with a machine line. As for the belt, it needs to be cut along the sides, cut off the excess fabric, stitch along short sections and sew to the product along the old lines.

Belt: method two

Is it possible to repair trousers if the product needs to be sewn in a couple of sizes? Of course! To do this, you need to rip off the belt at the very beginning. They need to be sutured along the side seams along the entire length of the legs from the very top to the bottom (symmetrically on both sides). This is done as described above. If it is required to significantly reduce the waist of the trousers, then it is necessary to take them in along the back seam as well. As for the belt, excess fabric is cut off from it, and it is sewn along the upper cut of the trousers to the old place. The product is ready!

Simple Rules

And now that there are certain rules for any repair of trousers:

It should be remembered that there are different styles of trousers, not all of them can be remade the way you want, and in the end, not all of them will look good.
When cutting, you need to use the usual homemade remnant, so you will not need to wash the product, because the lines are easily removed by steaming with an iron.
If you need to make a basting, it is better to do it exclusively with white threads, regardless of the color of the pants. They do not shed as they are not dyed.
There is no need to despair if there is no overlock machine at home, for this you can use the overlock foot that comes with every sewing machine, or simply work with a zigzag.
When hemming trousers (especially jeans), remember that the stitching should be sewn with the same stitch length as on other decorative seams.
At the end, be sure to iron the product.

Jeans are one of the most popular items in everyone's wardrobe. They are loved by both men and women, regardless of the type of activity. What to do if your jeans are out of fashion or too big? They can be narrowed down, and it is not necessary to resort to the help of an atelier. Everyone is able to cope with this task right at home.

Often, flared jeans make fashionistas and fashionistas rush to boutiques to get a new model. Unfortunately, not everyone has this opportunity. Especially for those people who can't afford to buy a new pair of jeans, but really want to have an attractive look, here are some tips on tapering the bottom of their jeans.

Required Tools

To narrow or sew in denim trousers, you will need the following materials and tools:

sewing machine;
threads (for the color of the product and for the finishing line);
pins;
needle;
overlock or special foot;
scissors;
cute or small;
meter;
iron;
ironing board.

Work instruction

Cut open the bottom of the pants.
Treat the seams with a well-heated iron so that there are no creases.
Turn out trousers.
Put on jeans and measure the places that will be sutured. Mark them with pins.
Take them off.
Spread on the table, eliminate all bends.
With chalk or soap, apply the contours of the lines along the pins.
Sweep lines along the given lines with a needle and thread, using a “needle forward” seam.
Perform a retest. If there is a need, then correct the lines.
Take off your jeans. Apply new lines, taking into account the allowance from the stitching line of 15 mm.
Cut off excess parts with scissors.
Sweep the allowance area.
Iron the resulting seams.
Sew trousers along the given contour lines.
Align the bottom of the galoshes.
Draw an allowance along the bottom of 30 - 40 mm with chalk or soap.
Choose the color of the thread for processing the bottom.
Bend the bottom of the legs along the allowance and sew from the front with a finishing thread.
Iron the line with a heated iron.
Eliminate excess threads.
Turn pants inside out and wear to try on.
If the result is positive, iron the entire product again.

Reference! It is best to narrow denim trousers along the inner seam. Thus, the external decorative stitching of the legs will not be disturbed.

How to narrow jeans at the waist

If you have thrown off a couple of kilograms, and the jeans “hang” on you, then you can try to change them yourself. There are several effective and practical ways to sew trousers around the waist on your own without leaving your home. Step-by-step instructions for performing work

The first method is simple and easy to implement.

Make a couple of darts along the belt line.
Cut off a few centimeters of the waist part of the trousers. Important! When carrying out this operation, you should be extremely careful so as not to spoil the product.
Sew the tucks made.
Use sharp scissors to cut off excess fabric from the waistband of the trousers.
Sew the product belt back.

Important! To make the gluteal area look good, it is recommended to carefully approach the creation of tucks. Too long seams can pull up this area, and this will ruin the overall look of the finished product on you.

The second method is more complex, but it is more reliable and better. When using it, you are unlikely to spoil the finished product, and it will definitely sit on the figure.

Turn pants inside out.
Open the loop that is located in the very center of the back of the trousers. If there is a company label that interferes with this operation, we recommend removing it.
Step back from the middle of the back seam by 70 mm in both directions. Open the waistband 100 mm on each side of the middle seam of the trousers.
Open the inseam approximately 80 - 90 mm.
Open the middle seam.
Remove leftover thread.
Iron the seams with a hot iron.
On the inside of the trousers, mark the places for sewing with pins.
Mark the stitching points with chalk or soap at a distance of 20 mm at a slight angle.
Stitch the jeans along the contours of the lines, overcast the edges on the overlock. If necessary, double stitch the seam.
Try on the belt to the size of the new waist, set the allowances and cut off the excess fabric.
Fold the jeans in half so that the right sides are inside.
Sew lines.
Attach the belt to the main body with pins. Sew them on.

Features of processing the bottom of the product after narrowing the legs

After narrowing, it is necessary to work clearly and accurately with the trousers. It is necessary to try to connect the old and new seams smoothly so that the transition is invisible. The entire lower part should be well ironed, all seams smoothed out. To do this, you can use a special block-sleeve or a pillow made by yourself.

Important Details

When using an overlock, it is necessary to process allowances on the front half of the trousers. The selection of threads must be carried out taking into account the color of the fabric. The stitch width on the machine for processing the lower part should be no more than 0.4 cm. In order to make a denser finishing stitch, you can use a double thread.

How to narrow men's jeans

This operation is no different from the process of narrowing women's jeans. Therefore, by following the same step-by-step instructions, you will get the desired result. It is only important to try on the future size on the man himself.

How to narrow jeans without a sewing machine

In the absence of a sewing machine, narrowing your favorite jeans is not a problem. The easiest way to narrow is to wrap excess fabric. Action algorithm:

Put on pants and stand near the mirror.
Pull one leg up to the desired width.
While holding the trouser leg, wrap the excess fabric to the side.
Wrap the bottom of the leg, fix the laid part of the fabric.
Do this operation with the other trouser leg.

Reference! If the length of the trousers allows you to wrap the leg several times, then use this feature. Do manipulations with height and width until you get the desired result.

Everyone can have a stylish and fashionable appearance. Change the styles and sizes of your jeans at home and make sure it's an easy and fun process.

Tips on how to sew jeans on the sides, at the waist, how to alter flared jeans.

Many people have jeans or even a few pairs in their closet that they haven't worn in a long time. Perhaps the thing has gone out of fashion, or maybe the jeans have become too big or small. Today we will talk about the case when jeans became great. Namely, how to properly sew them in.

How to sew in men's and women's jeans on the sides?

Important: It’s worth saying right away that sewing on jeans on your own is not as easy as it might seem at first glance. If you are not confident in your abilities, it makes sense to contact the studio. Otherwise, you can simply spoil the thing.

However, if you think that your sewing machine should not just gather dust, but work, you can try it. Just do not forget, this is the case when they say "Measure seven times, cut one!".

For work you will need:

Sewing machine
Scissors
Tailor's pins
Threads
Overlock
Ripper
Chalk or bar of soap

First, try on your jeans to determine where you need to sew in the product. If you need to remove excess fabric only on the sides - this is one way, and if you need, for example, to sew in the hips - there will be another technique.

Let's discuss all the options one by one. Immediately, we note that women's and men's jeans are sutured in the same way.

You can often find extremely simple tips on how to quickly sew in jeans on the sides. The bottom line is this: put a model that fits your size on top of the old jeans, cut off the excess and sew. Of course, this is by no means the case.

Important: It will not work to sew in jeans only along the side seam, it is necessary to sew in both the side cut and the inner one. Otherwise, the product will be twisted.

If the jeans fit perfectly at the waist and it became necessary to remove a little fabric from the sides, you can do this:

Put on your jeans inside out.
With tailor's pins, mark the places where you need to take in, first on one leg.
Do this with the inside seam and the outside.
Without tearing or cutting anything, take off your jeans.
With chalk or remnants, mark a line for the line.
Sweep the product by hand.
Try on jeans again, sit down, walk around.
Make sure your jeans fit properly.
Only after that you can cut off the excess 1 cm further from the future seam.
Now it's time to sew the jeans on a typewriter with threads that match the color.
Sew the finishing stitch along the outer edge of the jeans with double thread.
Iron your jeans carefully.
Finish the cut edges with an overlocker.

Video: How to sew jeans on the sides?

How to sew jeans in the hips?

You can try to sew in jeans only in the hips. This is appropriate in the case when the hips are narrow, and only the jeans are large in the hips, but sit normally on the legs.

Important: You can sew in jeans in the hips if you need to remove no more than 4 cm. Otherwise, you will have to flog the codpiece, which is often beyond the power of a novice needlewoman.

Jeans can be sewn in a few centimeters

You can remove excess tissue on the hips in this way:

Open the side seams.
Open the middle seam around the buttocks.
Sew, taking into account the necessary preliminary measurements.
The edges must be sewn strictly in the same style as the old seams, otherwise it will look ridiculous.

Important: It is almost impossible to sew finishing lines without experience. Therefore, we suggest that you familiarize yourself with this process by watching a video tutorial.

Video: How to sew a finishing line?

How to sew jeans on the pope along the back seam at home?

To sew in the back seam of jeans, you will need the sewing tools listed above. Sewing jeans by hand in this place will not work.

So let's get started:

First, put on your jeans.
It is inconvenient to make basting in this part of the body on your own, ask someone to help you remove the excess and make a basting with pins.
Then you need to cut off the belt.
After that, you will have to rip the back seam, it is not difficult to rip it.
Measure with a ruler the same distance between the old seam and the pins on both sides.
With a remnant, draw a cut line, do not forget to leave a 1 cm allowance.
After that, baste the seam, then try on the jeans.
If the jeans fit well, you can sew a seam on a typewriter.
Overlock the cut with an overlocker.
On the front side, make finishing lines.

How to narrow the back of jeans

How to sew jeans on the pope

Now you need to properly trim the belt:

Shorten it to the desired length by cutting off the fabric on both sides.
Sew the sides of the belt together.
Then sew the belt to the jeans, make a finishing line.

How to sew jeans in the waist, belt?

If the jeans are large in the waist, it is best to take them in, as described above - along the back seam. If everything is done correctly, they will sit well on the pope.

If the jeans are too big in the waist and you don't want to bother, you can narrow the waist a little in an easier way.

You will need:

Rubber
Scissors
Sewing machine
Regular pin (in another way English)

Let's get to work:

Take a small piece of elastic. The length depends on how much you want to shorten the belt.
Make slits in two places in the belt (the distance between the slits is a few cm longer than the elastic band).
Now thread the pin through the elastic band and pull it along with the elastic band between the slots.
Pin with a pin to the jeans so that the tip of the elastic does not “run away”.
On the sewing machine, sew two stitches from both ends.

Pull the elastic in

How to sew jeans in a belt: before and after

Video: How to sew jeans at the waist?

How to sew in, narrow in the legs flared jeans, straight to narrow at home yourself?

The now unfashionable flared jeans can be narrowed and get modern skinny.

Important: You should not try to make skinny jeans from flared jeans if the flare is initially too wide. The cut is completely different, the result will not please you.

It makes sense to narrow the flare by a few centimeters (3-4 cm). In this case, arm yourself with sewing tools and get to work:

Iron your jeans and try them on.
Have someone help you pinpoint the inseam and crotch.
Open the folds, as well as the side and crotch seams.
Draw seam lines with chalk or a bar of soap.
Leave an allowance.
Cut off excess fabric.
Baste the seams by hand.
Try on jeans again, walk around in them, try to sit down.
If everything fits, you can sew the seams on a typewriter.
Finish the edges with an overlock or zigzag.

Flared jeans need to be sewn on both sides

How to sew in men's and women's jeans a size smaller?

Important: Jeans can be sewn in a size, a maximum of 2 less. It is easier to sew new jeans than to take them in more than 2 sizes.

If you do take the risk, be prepared to completely recut your jeans.

To downsize your jeans, put them on and take a close look at exactly where they sit ugly.

Try to choose the easiest way to rework, with minimal labor investment and the best possible result.

There are several ways to change jeans a size smaller:

Cut off the excess on the sides and the inner seam.
Sew along the back seam.
Remove a little in the hips only on the sides.

A few simple rules for successful sewing jeans:

Jeans, both women's and men's, are altered according to the same principle.
Before starting work, wash the product and iron it.
It is advisable to find an assistant (-tsu) to help you make correct and even marks.
Do not rush to cut off the excess, it is better to finally make sure that you are doing everything right.
Remember, there are some models that are not subject to redrawing.

How to sew jeans to size

How to shrink jeans at the waist without a sewing machine?

The above tips are suitable for those who have a sewing machine. If you do not have the opportunity to sew in jeans on a typewriter, you can resort to other methods:

Wash the product in water with a temperature of 90 °, the fabric will sit down for a while, however, then the jeans will become large again.
Choose a suitable belt if you need to collect only at the waist.
Sew the elastic by hand into the waistband.

In principle, it is possible to sew on the legs by hand, but it will not look aesthetically pleasing, finishing stitches cannot be done manually either.

Finally, I would like to say, if you are not sure of a good result, it is better to take your expensive thing to the studio, professionals will do everything right. However, following the advice, you can take in your jeans so that you can wear your favorite thing again. We hope everything works out for you. We suggest watching the video to better understand how to alter jeans.