Planter bike made of wire and teip tape. Twine bike. Master Class

31.07.2019

With the help of the original flower pots, decorations are made. Such a product will emphasize your individuality, will become an idea for decorating the interior of the house, an interesting gift.

Bicycle with flowers

To make a bicycle with flowers, you will need a nylon thread. Take cocktail tubes, a package of glue, cardboard, and a tool - scissors. Prepare beads, a small pot. To decorate the product, buy ribbons of different colors. You can also use sequins.

In general, the manufacturing process will take a little time if you follow the instructions.

First of all, you should cut out three identical wheels, then wrap them with nylon thread.
It should be cut off 2 cm from the top of the tube, in the same way, take four blanks to prepare one wheel. Then it is also necessary to wrap the threads. Four parts must be connected with glue. Then connect the wheel to this part.
Prepare two straws for a cocktail. One part should be stretched, the upper part should be cut off in another tube. Then insert it into the stretched part. The blanks that were made as a result of this process should be wrapped with thread.
Steering wheel manufacturing. You need to cut the top of the tube, which is about 2 cm before the bend, and 3 cm after the bend. Then connect the parts, wrap with thread.
After that, it's time to assemble a miniature vehicle. To fasten the rear wheels, take a tube, the length of which is 11 cm.
Then wrap it with thread. The parts should be fastened together with glue.

Empty jars or small plant pots are used as bicycle planters. They should also be decorated. To do this, they are pasted over with a nylon thread, fixed in the area of \u200b\u200bthe location of the rear wheels. The pot must be filled with flowers. Depending on the width of the ribbon, flowers should be selected. The tapes should be kept horizontal during this process. Wrapping occurs diagonally, as a result of which 1.5 cm remains.

Important! A decorative bicycle for flowers will become a really small masterpiece if you approach the process carefully. To make flowers, you need to take ribbons of different shades. It is necessary to wrap the end of the ribbon around the middle until you get a flower of the size you need. Then cut off the excess pieces.

Decorate a flower bike with sequins. A homemade bow can be glued to the front.

Planter bike

For this floral composition, you will need a wire with a diameter of 3 cm. Prepare a white teip tape, as well as a thin skewer. For the manufacturing process of the product, you will need scissors, round-nose pliers.

Wheels are made from wire. You will need 3 large circles for the front wheel and 6 parts for the two rear wheels. With the help of a teip tape, the parts are connected, as a result of which 3 elements are obtained.

The frame for the decorative vehicle is double. Prepare 2 long pieces of wire, in this case 50 cm is enough. After bending, wrap them with tape.

Then comes the assembly process. The large front wheel is located in the bend of the steering wheel, in the middle of which the frame is attached. Knitting needles can be made in the form of interesting curls. Three pieces are enough for one wheel.

All elements are attached to each other with tape tape.

A decorative bicycle is decorated with a basket of flowers. To make a basket, you need two circles made in a similar way. Their diameter is equal to the diameter of the front wheel. Inside the basket are attached special twigs made in the form of curls of wire. Eight pieces are enough to decorate the basket.

Then take a ready-made bouquet, or prepared on your own to decorate the basket.

Note! Often such miniature bicycles are varnished. Such a measure will allow the product to serve for a long time without losing its quality properties. Tape tape after such a coating will not get dirty.

You can also change the color of the decorative bike itself. Use golden acrylic. With it, you can achieve a bronze effect.

Flowers can be made independently using bead weaving. To do this, use the French technique. In order for such flowers to hold, they can be attached to the foam.

Decoration in the garden - photo ideas

conclusions

Such a small decorative product will really decorate any interior, or an original gift. Making will not take much time or effort, you just need to follow a small instruction, prepare materials.

The planter bike looks amazing. If you previously singled out such products in stores, for example, you noticed what a unique style, uniqueness they create. Made independently, jewelry is in no way inferior to a purchased product.

Suite design. Cache-pot well and a bicycle made of twine and cocktail tubes

I would like to introduce you to the craftswoman Sjusen and her wonderful works. The planter well and the bicycle are made of cocktail tubes and twine. As the author writes, she made the work out of hopelessness (there was no wire), out of laziness (too lazy to go to the garage for wire) and out of impatience (the author was not going to wait for someone else to do similar work). Here is a clear example of how "bad habits"))) allow you to create masterpieces with your own hands) Many thanks to the author for the pleasure of watching and for the affordable master classes!

Let's start with the well. The well is functional, you can turn the wheel and raise and lower the bucket.

We will need: twine, cocktail tubes, coffee beans, hot glue, scraps of cardboard or ceiling tiles:

We cut a strip of cardboard into an A4 sheet, 6 cm wide and connect it with a stapler or glue into a ring:

We cut the cocktail tubes into pieces of 6 cm, wrap each with twine, only 36-38 pieces:

We glue the ring with tubes:

We cut out the details from the ceiling tiles or thick cardboard: a circle with a diameter of 11 cm (2 parts), a circle with a smaller diameter (1 part), a rectangle 6x12 cm (2 parts), a "peg" 10 cm high, 2.5 cm wide and with a hole in the middle (2 parts):

We wrap all the details with twine:

Decorate with grains:

We glue the bottom into the cone (a smaller circle, according to the diameter of the cone):

We glue the wrapped circles to the cone, one from the bottom, the second from the top, to hide the protruding "tails", glue the twine pigtail in a circle. everything turns out neat:

"Pegs" are glued to the base of the cone:

We wrap a tube about 15 cm long with twine, but only the very beginning:

We decorate the tip and insert it into the holes of the "pegs":

We wrap the rest of the tube with twine, up to and after the 2nd peg. So the tube will spin and the well will do its job (raise and lower the bucket):

We model a bucket, a handle made of wire, a bucket made of cardboard (you can use a suitable lid):

We fix one end of the twine rope with glue on the handle of the bucket, and we wind the other end onto the crossbar of the well and also fix it with glue:

We check that the wheel should spin and raise (lower) the bucket:

We glue and decorate the details of the roof. Fixing the roof:

PLANT BICYCLE

We only need twine, cocktail tubes, coffee beans for decoration, hot glue and scraps of ceiling tiles or cardboard:

We cut out 3 blanks for the wheels from the scraps of the ceiling tile (you can circle a reel of large adhesive tape and then focus on this size of the wheels; you can glue 2 blanks for each wheel to make them more stable - then there are only 6 blanks):

Wrap with twine:

From 4 cocktail tubes we make such blanks (about 2 cm before and after the fold) and wrap them with twine

Glue with hot glue like this:

We insert it into a circle, the wheel is ready (we make 3 such wheels). I got one wheel with a diameter of 11 cm:

We take another tube, bend it and slightly stretch it in the fold (stretches well):

We insert one segment left from the blanks for the wheels into this bent tube - for this, the bent tube must be cut a little and inserted straight into it with a drop of glue. We make two blanks and wrap them with twine

For the steering wheel, we cut 2 blanks (2 cm before the bend and 3 after) and connect them

And one more blank - a straight tube about 11 cm long (if you are afraid that the bike will be unstable, you can insert skewers of a suitable size and diameter inside)

We wrap with twine and decorate with coffee beans "pots" (different jars of melted cheese, sour cream, jelly, ice cream, etc.):

We decorate with grains on one side 2 rear wheels:

At the straight blank and the "steering wheel" we decorate the side parts with grains so that everything is neat:

We start assembly. We insert a straight tube into the rear wheels, fix it with glue:

In the front wheel, still without decor, we insert 2 double blanks like this (I tried it differently - ugly), fix it with glue (you can strengthen the axles with skewers by inserting them inside the tubes)

A piece of tube (1.5-2 cm) is inserted between the upper tubes and glued:

Wrap with twine:

We glue the lower axles to the rear wheels:

Glue the steering wheel and pots

Well, how do you like the idea of \u200b\u200busing straws for a cocktail and twine? You can get great crafts for decorating the interior, you can give them or sell them for the upcoming holidays. Someone makes good money on manual work, but there are people who make money on the Internet) You can find out how to make money in an online casino on the website http://onlinecasinogid.com/blackjack. Modern online casinos provide an opportunity not only to enjoy your favorite game, but also offer profitable bonuses and conditions for beginners. You can learn more about the history and development of the most popular games on the site.

This article contains several workshops on making a bicycle quickly and easily with your own hands from improvised materials with step-by-step photos and videos. Such a product will serve as an excellent element of home decor and will be the subject of surprise and admiration for all guests.

We make the composition "Flower Bicycle" with our own hands

To create this decorative composition, we need:

Decorative bicycle, which can be purchased at a specialized store, or made by yourself, guided by master classes from the Internet;
corrugated paper;
Styrofoam;
Toothpicks, glue, glue gun, thread or wire for attaching flowers;
Decor elements: tulle, bows, beads, ribbons, homemade beaded flowers, sisal;

First you need to make a small bouquet of flowers from corrugated paper. To do this, you need to cut a rectangle measuring five by seven centimeters, fold it in half, round one edge and gently stretch it.

Now you can start making petals. You need to cut a strip of paper measuring ten by five centimeters, and fold it in half twice. Then you need to cut out a petal of this shape, as shown in the photo below, and tuck it a little with an ordinary handle. Further, these petals must be attached to the bud and secured with wire.
Flowers can be made in any shape and size, and when you have enough of them, you can start creating the composition itself. The bottom of the wicker basket of the bicycle must be filled with a piece of foam and fasten paper flowers and beads on it with toothpicks. You can also add green sisal and various elements in the form of decorative bugs and butterflies. Our flower charm is ready!

We make a bicycle from straws for a cocktail quickly and easily

To make such a charm, you need a little waste material and a few hours of free time.

Tools and materials for creating this product:

Tubes for cocktails;
Disposable plastic cup;
Scissors, toothpicks, cotton swabs, adhesive tape;
Threads, bandage.

For greater clarity, this master class is presented in the video photo instructions.

In this master class, we will show you how to make an original flower pot with your own hands.

A planter in the shape of a bicycle will be a very unusual home decor or a gift for relatives and friends.
To create such charms with our own hands, we need:

Wire two to three millimeters wide;
Teip-tape white;
Four white buttons;
Glue "Moment" or glue gun.

First, you need to make three circles of different sizes from the wire and wrap them with teip tape. Now you can add curls to them and fix them well.
The same curls need to decorate the entire bike.
The next step is to create a basket for our bike. It is made using the same technology as the bicycle itself and is fixed with glue.
It remains only to make flowers from sweets and decorate the product with them.

We create a very cute decorative bicycle with our own hands

To create such a miracle, we need:

Several blanks from cardboard;
Small wooden stick;
A piece of thread, toothpicks;
Scissors, glue.

First you need to make a basket out of cardboard. To do this, cardboard strips must be glued to the bottom of the product, as shown in the photo below.

And then weave a basket out of them.

In the same way, only with the absence of weaving, you need to make three wheels.
Next, you need to take a small wooden stick, two strips of cardboard and a thread and make a fork out of them for the future bicycle.

The details that turned out at the end need to be glued.
The handlebar of a bicycle is made of cardboard and thread, and is also decorated with some kind of decorative element.

Here is what should be the output:

Let's make a decorative planter bike out of twine and fragrant coffee beans

For work we need:

Cardboard;
Tubes for cocktails;
Leg-split;
Coffee beans;
Polymer glue;
Scissors.

On cardboard with a compass, you need to draw circles, as shown in the photo below and cut them out with scissors.

Then these blanks must be wrapped with twine.
In the straw for cocktails, you need to cut off the excess, leaving about two centimeters from the bend on both sides. You need four such blanks to make one wheel for a bicycle. Next, each tube must be tightly wrapped with twine.
Now you can assemble the wheels, as shown in the photo below.

Then you need to take two tubes, stretch one, and cut off the top of the other and connect them as in the photo below. Two such blanks need to be wrapped with twine.

The steering wheel must be created by cutting off the top of the tube, leaving two centimeters before the bend and three after it. Wrap them with twine.

The next blank for the steering wheel is a tube eleven centimeters long, wrapped with twine.

The wheel needs to be decorated with coffee beans. It is necessary to insert two blanks into the front wheel and fix them with polymer glue.
Between the rear wheels you need to insert a straight tube and fix it with glue.
A piece of tubing must be inserted between the upper ones. And wrap the place of their attachment with twine.
The role of the cache-pot here will be played by an empty jar. You can decorate according to your taste.

Video on the topic of the article

At the end of this article, a selection of thematic videos is presented on how to make a topiary with a bicycle, make a cute cradle for this type of transport, or arrange your composition in the steampunk style.

Decorative bicycle made of twine and tubules. Master class with step by step photo

Master class on needlework "Cache-pot - bicycle"

Kotlyarova Olga Yuryevna, teacher of additional education, MAOU DOD "House of Children's Creativity" MO "Leninogorsk Municipal District" of the Republic of Tatarstan.

Master class for senior students, teachers and parents.
Purpose of the master class: interior decoration, souvenir for relatives and friends.
Friends, I suggest you make a decorative planter for all your loved ones for calendar and family holidays.

I will ride the bike for a long time.
In the deaf meadows I will stop him.
Narva flowers and give a bouquet,
The girl that I love.
Narva flowers and give a bouquet,
The girl that I love.

Target: to teach how to make a planter - a bicycle from waste materials.

Tasks: to expand knowledge in the field of arts and crafts, the development of creative potential, the formation of ecological and aesthetic culture when working with waste material.

Detailed description of the master class "Cache-pot - bicycle".
Necessary materials:
- thread "twine"
- thick cardboard
- pencil
- cocktail tubes
- glue "Titan"
- coffee beans
- scissors

Progress:

1. We take thick cardboard, apply an object that is very similar to a wheel (for example, a reel of adhesive tape), circle it, cut it out. For one wheel, you will need 2 pieces of cardboard, they must be glued together. You need to make 3 such bases for the wheel.

2. We wrap all blanks with jute twine.

3. We take a cocktail tube, measure 2 centimeters before and after the bend, cut it off - these will be the spokes of the bicycle, this is necessary for the stability of the structure. For one wheel you will need 4 blanks. Since there are 3 wheels, 12 pieces need to be made. Then wrap all the blanks with twine.

4. 4 blanks wrapped with twine are glued together with Titanium glue, like this.

5. We insert this design into a cardboard circle wrapped with twine. The wheel is ready. For a bicycle, you need 3 of these wheels.

6. We take whole coffee beans and glue on one side 2 back of the bicycle wheel.

7. We take a cocktail tube, measure 2 centimeters before the fold and 3 centimeters after the fold, cut it off. We will need 2 such blanks for the steering wheel. Now they need to be connected to each other.

8. The steering wheel that turned out is wrapped with twine.

9. Take 1 cocktail tube, measure 11 centimeters, such a blank will fasten the rear wheels together.

10. At the steering wheel, which we have turned out and the parts for fastening the rear wheels, we decorate the edges with small coffee beans.

11. We take one tube, bend and stretch where the fold is. The tube on the short side must be cut, smeared with a drop of glue and inserted into it the segment remaining from the blanks for the wheels.

12. We wrap the resulting structure with jute twine. Such blanks will need 2 pieces.

13. Let's start assembling the bike. We insert a straight tube into the rear wheels using Titanium glue.

14. In the front wheel, insert the blanks from item No. 11.12. Glue for strength. We decorate the front wheel on both sides.

15. Insert a piece of tube 2 centimeters long between the upper tubes and glue it.

16. What happened is wrapped with twine.

17. Let's take a container that will directly act as a planter (for example, from yogurt, butter). Wrap with twine and decorate with coffee beans.

18. Glue the steering wheel and pots. We insert artificial flowers into the pots. The planter in the form of a bicycle is ready.

You can put any flowers you like in a flower pot, both artificial and live.
I wish you all creative success!