Our kids 

DIY colored leather bracelets. DIY leather bracelets for men and women. Bracelet from an old belt

Such bracelets are good just in a set: make and wear several at once, from leather, fabric and beads of different colors.

You will need:

Flaps of different natural leather;

Multi-colored scraps of fabric;

Leather glue;

Beads, rhinestones for decoration;

Accessories for bracelets;

Dummy knife;

Metal ruler;

Scissors;

Pliers.

Sequence of work:

1. Use a knife and a ruler to cut the leather strips for the bracelets. Using scissors, cut the strips of fabric just narrower than the strips of leather. Glue the fabric inside out to the skin's face. Secure with an iron.

2. Glue beads and rhinestones on the fabric.

3. It remains to make the fasteners. Attach the clips to the ends of the bracelets. Attach chains and clasps to the eyelets of the clips. Ready.


Photo and source: helloglow.co

2. Bracelet made of leather cord with a strip of beads: master class

How the bracelet turns out will depend on the choice of cord and beads. You can make the beading contrasting, as in this example, or match the beads in color - the result will be more restrained.

You will need:

Leather lace;

Threads in the color of the lace;

A thin needle for the skin or just a thin sharp needle;

Pendant or button for fastening;

Scissors.

Sequence of work:

1. Fold the lace in half. Thread the needle and start sewing the two ends of the lace while threading the beads between them. Leave a small open loop for the fastener.



2. Having made the bracelet to the desired length, cut one end of the cord, and put on a button or pendant on the other and sew the end of the cord. Ready.



Photo and source: fabyoubliss.com

3. Wide leather bracelet with an unusual clasp: master class


For such a bracelet, one large metal clasp or a smaller pair will do. Look in your stocks or go to a craft store: you will surely find something that will not only become the clasp of the bracelet, but also decorate it.

You will need:

Wide strip of leather;

Large metal clasp and fasteners for it;

Scissors;

Ruler;

Dummy knife and pad;

Skin glue.

Sequence of work:

1. Cut a strip of leather to the desired length and width so that there is enough for the folds to the inside. The folds will strengthen the edges of the bracelet where the clasp will be installed. Tuck the leather over and glue, wait for the glue to dry.


2. Install the clasp. Ready.



Photo and source: thinkcrafts.com

4. Thin bracelet in several turns made of leather and metal: master class


This jewelry looks like three bracelets, but in reality there is only one bracelet: it is put on in several turns. You can find fittings and metal tubes in craft stores.

You will need:

Leather lace;

Metal tubes for decoration;

Accessories (clips for the ends of the bracelet, chain, clasp);

Scissors;

Nippers;

Pliers.

Sequence of work:

1. Try on the lace on your arm, decide on the length of the bracelet and cut the lace.


2. Pass the string through all the tubes one by one.



3. Put the clips on the ends of the bracelet and secure.




3. Bite off the chain to the desired length. Attach the clasp to it. Ready!




Photo and source: juliettelaura.blogspot.com

5. Wide leather bracelet with adjustable length: master class


You can build a pattern for such a bracelet yourself or use a suitable plastic bracelet as a template.

You will need:

Scissors;

Buttons, hammer and fixture for their installation;

Hole punching device;

Paper, a pen, a centimeter for building a pattern or a ready-made plastic bracelet for a template.

Sequence of work:

1. Make a bracelet pattern or use a ready-made bracelet. Transfer the pattern to your leather and cut out the bracelet. A small leather fastener is also needed.


2. Install the button on the clasp and on the bracelet, as shown in the photo.



3. Make holes for length adjustment. Ready!



Photo and source: blog.cyeoms.com

6. "Ruffled" leather bracelet with beads: master class


It is quite simple to make such a decoration, and the result is amazing and unusual.

You will need:

A wide and long flap of not too thin skin;

Thin elastic band;

Several beads;

Device for punching holes in the skin;

Pen and ruler.

Sequence of work:

1. Draw a rectangle about 8x40 cm on the skin and cut out.

Woven leather bracelets are a versatile accessory. Leather bracelets have been in trend for several fashion seasons. Bracelets come in a variety of colors and shapes. They can be both female and male.

At the same time, a leather bracelet, as in the photo, can look both elegant and extravagant. It all depends on the pattern of weaving a leather bracelet, which you can make yourself. How does one learn to weave bracelets? Read more about this in our step-by-step master class with photos and videos.

You will need small pieces of leather for this. They may not be new.

Braiding is one of the simplest and most beautiful solutions for a leather bracelet that will suit both men and women. The pigtail can be woven in several ways.

Simple DIY leather bracelets:

It will take a strip of leather the length of the wrist circumference plus 2 centimeters. The width of the leather bracelet can be any.

You can try to make a narrow bracelet about 2-3 centimeters. Using a hole punch, you need to make holes at the ends of the workpiece. Laces can be passed through these holes, or a metal button can be fastened. This is a universal bracelet blank.

This blank can also be decorated with rivets or patterned holes. A master class on making a leather bracelet offers to learn how to make an unusual braiding. The unusual thing is that the pigtail will not be woven from separate parts. This weaving is not split, but not complicated at all.

Learning to weave a leather bracelet: a step-by-step photo lesson

1. Using a ruler, divide the width of the bracelet into three equal parts. Make marks, draw with a knife, making 2 cuts along. You will get 3 strips from which the pigtail will be woven. 1 strip - left. 2 stripe - central. Stripe 3 - right.

2. Fasten one end of the bracelet. It is easier to work with weaving this way. You can put it under the load or tie it to something. You can also use masking tape and glue the end of the bracelet to the table.

3. Raise the end of the bracelet, pass it through strips 2 and 3. Lower it down (moving away from you). The strips will begin to curl (this is how it is necessary, they will straighten out at the very end). Lower the end of the bracelet down.

4. Interlace the left strip with the center strip. Weave the right strap over the center strap. Skip the end of the bracelet between 1 and 2 stripes. This should straighten the wrapped strips.

5. Braid the right strip across the center, interlace the left strip with the center strip. Pass the end of the bracelet through strips 2 and 3. The strips will wrap up again.

6. Repeat steps 2 and 3 until the bracelet is finished.

Different skin behaves differently. Much depends on its thickness and softness. But in any case, the last step should be to straighten the bracelet.

Some bracelets are denser, some are looser. It does not depend on the weaving technique, but how plastic the skin itself is. Having mastered one weaving option, you can continue to learn how to weave bracelets using different techniques with your own hands.

The scheme that we have given will become the basis, even for beginners it is easy to learn how to weave leather bracelets using it. A leather bracelet is not suitable unless for a business dinner or going to the theater. For other cases, you can actively use leather accessories. They are especially recommended for country, casual, ethnic and many other styles.

Making bracelets this is a very interesting and creative activity. This does not always require a master class, sometimes a photograph is enough for an idea to visit your head. Today I offer a selection of various models from the Internet with a small accompanying description. The models are very simple, but there is a useful thought in every idea. Moreover, many people liked the last review very much, we continue the topic.

Pendants and connectors are often used in such bracelets. In the proposed version, a flat natural leather cord and a ring connector are used. The clasp-button is attached to the end piece for ribbons and cords by means of connecting rings measuring approximately 4-5 mm:

Depending on what accessories are used for bracelets, the style and mood of the jewelry completely changes. A few more options for the example, made according to the same scheme. A waxed cord is used here, but with leather cords, this bracelet will be more durable.

If the hole is too small, limit switches can be used. It is better not to use connecting rings in such a place, they can bend when pulled. Or take the strongest, small diameter and 1-1.2 mm thick.

In our store there are a lot of connectors suitable for such bracelets: birds, fish, twigs, lizards of different colors, flowers, eyes, lips, etc.

For a large item or button, you can simply thread the cord through the holes:

In this case, the top connector is also not fixed:

For the summer, you can make a bracelet with an anchor pendant. In order not to search for a long time, I picked up several pendants for example: number one, number two, number three, but in general we have a lot of them)))

A few more options for leather bracelets and laces:

Funny solution:

It's so easy and simple to make a lot of bright bracelets for the summer! Have a good preparation for the hot season!

Bracelets are one of the most popular types of jewelry. Therefore, many fashionistas and women of fashion want to know how to make a leather bracelet. In order to please yourself or a friend with a stylish decoration, first of all, you should find suitable schemes.

Such diagrams clearly show how the finished product will look like:

And they also answer the question of how weaving takes place:

How to make a leather bracelet for men

Men's bracelets are most often woven from leather. They look elegant, masculine and even a little brutal. The jewelry you woven will be the best gift for your loved one. And in order to make your work easy and pleasant, below is a step-by-step master class on leather goods.

You will need:

1) A small piece of skin;

2) A set of buttons;

3) Button insert kit:

4) Hammer and knife.

Sequencing:

1) Prepare a piece of leather, cut it to the desired shape according to the length of the wrist.

2) We pin the place where we want to make the button.

3) Remove the bracelet and lay it out.

4) We lay out the buttons and attachments on them.

5) In total, you will need four types of buttons with nozzles.

6) We make punctures on the skin in the places where the pins were. You can use a gypsy needle.

7) Expand the hole. We insert the rod and hit it with a hammer.

8) You should get such a hole.

9) We make the same hole on the other side.

10) We put the nozzles on the plastic plate.

11) Insert the button.

12) Insert the bottom of the button. It needs other tools.

13) We put the nozzles on the plate.

14) Insert the button like this.

15) It should look like this.

The bracelet is ready.

You can decorate the product with one more button.

How to make a leather bracelet for women

Leather bracelets on the hands of women look very original. They go well with jeans and sportswear. Women's jewelry is more graceful and refined than men's. They are usually thinner and more difficult to make. Today we invite you to get acquainted with the weaving of a very simple and original women's leather bracelet.

You will need:

1) Thin belt.

2) Chain.

3) Scissors.

4) Hole punch.

Sequencing:

1) Cut out two rectangles from the belt.

2) Cut out arrows from leather, you can use a template.

3) We make two holes in the arrow and stretch a chain into them.

4) We wrap the chain around the wrist, cut off the excess.

History of leather jewelry: myths and truth

Leather jewelry is easy to make and very durable. Your boyfriend will be able to wear them for many years. And every time he puts on the bracelet, he will think of you.

Bracelets, both for men and women, have a long history of existence. A thousand years ago, birch bark wrist jewelry was made in the north of Russia. And in the distant southern states, they made similar products from bird feathers.

Leather bracelets do not have such a deep and ancient history. However, their story can get a little scary when you consider one thing. Now in some countries of Africa, Australia and the distant lost islands of the Pacific Ocean, aborigines living in wild primitive tribes wear very strange bracelets.

These wrist ornaments are made from tanned animal skins, as well as dried skin of enemies. It is a symbol of strength, power and victory.

Men's leather jewelry has a rich history; it pulls a trail of secrets, bloody battles and fierce battles. Therefore, women consider them to be very beautiful and sexy.

Women rarely wear such accessories. They are preferred mainly by ladies who dress in a sporty style. Such beauties look very good in sports jackets, jeans and sneakers. And leather jewelry suits them wonderfully.

A selection of videos on the topic

In this master class, we have collected the best bracelets that can be made from leather. They will help complement the outfit and create a complete look.

Tools and materials Time: 1-2 hours Difficulty: 4/10

  • artificial or natural leather;
  • buttons, rivets;
  • hole puncher;
  • pliers;
  • scissors;
  • hammer.

Simple leather bracelet with an unusual shape

This simple leather bracelet, the master class of which we will show below, is done quickly enough, and the result will exceed all your expectations.

We need

1) A piece of leather

4) Hammer

Step-by-step master class

Step 1

Cut out the base for the bracelet

We had such a piece of skin from the very beginning:

Measuring the width of the wrist

Step 2

Cut out the base:

It was:

Became:

Before you cut the leather, you must have a complete understanding of what you want to get. We have got the basis of this form:

Step 3

Labeling buttons

Our base is ready:

Now we apply the blank to the hand and insert the pin in the place where we want to make the button

You need to stick the pin deep enough to make a mark on all layers. Be careful not to pierce your hand.

We pull out the pin, remove the bracelet, lay it out on a flat surface, stick the pins into the places with the holes.

There will be buttons in these places.

Step 4

Cooking buttons and tools

We take out our buttons and tools from the package.

For work, we need 4 types of buttons and for each of them, there must be its own nozzle

The black circle is needed in order not to damage the surface on which we will put the buttons

A piece of the rod will be needed to insert the buttons

Step 5

Skin preparation

Now we will make holes for the buttons (if you have a hole punch, then everything will be much faster. Just punch holes in the places with the pins)

Pulling the pins

We put a black circle under the hole

Insert a piece of the rod, with the sharp end to the skin and hit it with a hammer

This is the hole you should get:

We do the same on the other side.

Step 6

Insert the top part of the button

Insert tools and materials:

We put on nozzles on a plastic plate

Ready! The top is done.

Step 7

Insert the bottom of the button

Each part of the buttons needs its own tool. For the lower part, it is like this:

Putting the nozzles on the plate

Now we carefully look at the pictures and insert the button in the same way. Do not confuse

Here's what happens:

The bracelet is almost ready

Step 8

We decorate the bracelet

To make the bracelet more interesting, let's add another button.

We put the button at the desired distance (about 1-1.5 cm) and press it against the bracelet to leave a mark

Punching a through hole with a pin

Repeat steps 5 and 6 and get a super cool bracelet

This is how it will look on the hand:

Don't be afraid to get creative with your choice of shape. Experiment!

Leather bracelets for men

Bracelet from an old belt

Sooner or later, the leather belt wears out. In order not to throw it away, we suggest you make a vintage bracelet.

We need:

  • Old Leather Belt
  • Hammer
  • Nail
  • Scissors
  • Pencil

How to do:

  1. Wrap the strap around the wrist 3 times
  2. We put a mark at the end after the 3rd time
  3. Cut off excess with scissors
  4. Using a nail and a hammer, we make a hole so that the bracelet closes with a clasp

Everything! Just a few minutes and the bracelet is ready!

But no, here's another thing, such a bracelet can be made for a girl using her old belt

Creative bracelet with iron clasp

This creative leather bracelet is made quickly enough and is perfect for training the first steps in working with leather.

We need:

  • Metal clasp (it is not necessary to use exactly the same as ours, any will do)
  • Hole puncher
  • Hammer or tool to insert buttons
  • Rivets
  • Scissors or dummy knife
  • Ruler
  • Varnish (optional)
  • Glue (optional)

How to make a leather bracelet for men with an iron clasp?

Step 1

Cut out a strip of leather 5 cm larger than the wrist. The width should be 2 cm wider than the fastener. For this we use a knife or scissors.

Step 2

We fold over 2.5 cm of leather on each side (we cut off the excess, so we have a larger fold). You can stick it on, or you can leave it as it is

Step 3

We wrap the wrist, attach the clasp and put notes on the place of its attachment

Step 4

We punch holes with a hole punch (in extreme cases, you can use a knife) and insert rivets, hammering them with a hammer

* The main thing is to choose the required diameter of the rivets so that they are larger than the hole in the fastener

Step 5

We repeat the same on the other side.

Step 6

Optionally, the bracelet can be varnished

Leather wrist bracelets for women

For arrow lovers, we made such a bracelet.

We need:

  • Old leather belt (must be thin to be cut with scissors)
  • Chain
  • Scissors
  • Hole puncher

How to make a cute leather bracelet:

1) Cut 2 rectangles from the old belt

2) Cut out arrows from leather (we did not use a template, but you can draw it and cut it out of it)

3) We make 2 holes on the arrows: one in the front, the other in the back. For this we use a hole punch

4) Pull the chain through the holes

5) Wrap the chain around the wrist (if it is long, you can cut it with pliers)

We need:

  • Buttons
  • Button inserts
  • Hammer
  • Scissors
  • Paints

How to make a colorful bracelet with patterns

1-2) Cut out strips of leather 2.5 - 5 cm larger than the wrist circumference. Our width is 1.5 cm, you can make any other

3) Apply the first layer of paint in the form of geometric patterns. Let it dry

4) Apply the second coat of paint

This bracelet will be a great gift for your girlfriends! Be sure to do it :)

Bracelet bow

We need:

  • Piece of leather 22 x 10 cm
  • Scissors
  • Threads
  • Buttons

How to do:

1) Cut out an oval piece of leather, measuring 22 cm x 10 cm (you may have another, depending on the width of the wrist)

2) Fold the leather in the middle, as shown in the picture below

3) Around the fold, wrap with thread

4) Cut out a small piece of leather, approximately 4 cm x 1 cm

5) On top of the threads, glue a small leather rectangle

6) Using threads, sew buttons on opposite sides of the bracelet

Weaving leather bracelets

Bracelet weaving patterns

Now we can consider with an example how to weave a leather bracelet:

Bracelet with carabiner

We need:

  • Leather or suede tape
  • Scissors
  • Pliers
  • Clamping tool (not only specialized, but a simple clothespin will work too)
  • 2 clamps
  • 2 rings
  • Carbine

How to do:

1) Cut off a piece of tape so that you can wrap your wrist 3-4 times (we cut it 4 times)

2) Cut off 2 more pieces of the same length

3) We lay out the laces in a straight line, put on a clip and fix with pliers

4) Using a clamping tool, we fix the laces and weave a pigtail (how to weave is up to you, everyone has their own method. You can see the basic schemes just above)

5) With our unfinished bracelet we wrap the wrist, it should turn out to be 2 turns. We cut off the excess, leaving 1-1.5 cm

6) We put on the clip, as in the 3rd paragraph

7) Using our pliers, we put on the rings. We close one, leave the other ajar

8) Put on the carbine and close the ring

If you did everything correctly, you will get a braided leather bracelet like this.

True, we already have 2 of these on our hand :)

Do not be afraid to experiment: make the bracelet longer or make several of them, change the color of the skin or the type of weaving.

Several video tutorials on weaving bracelets

Why are these leather bracelets the best?

They are quite simple to perform. It took us more time to write the master class than the work itself.

They are durable. Bracelets made according to our MK will be worn for a very long time.

They are unisex. Although we have categorized the bracelets, in reality they are all unisex. Even men's bracelets can be made of pink leather, then they will become women's :)

Similar materials