Dental beauty and health 

Women's headbands selection of models. How to tie a headband for a woman

This is a very comfortable headpiece. And you can tie such a bandage yourself. There are many patterns for them. We will knit knitted headband pearl pattern with four overlaps. The bandage is knitted quickly and easily.

To knit a headband, we need:

  • Yarn;
  • Knitting needles;
  • Needle;
  • Beads for decoration.

We will knit a bandage according to the following simple scheme.


To start knitting the bandage, take the knitting needles and cast twenty-six stitches on them. You can take any yarn for the bandage. The thicker it is, the warmer the product will be.
photo 1



And now we need to knit several rows with a pearl pattern. We knit it like this. We knit first the front loop, then the purl, again the front, then the purl. That is, we simply alternate the loops for the entire row.
After the row is fully knitted, move on to the second.
In it, we will also alternate purl and front loops in the same way. But not as if we were knitting an elastic band one by one, but with a shift of one loop.
That is, over the purl loop we will knit the front loop, and over the front loop, on the contrary, the purl loop.
And so we knit a number of rows.
photo 2



In total, we knit sixteen to seventeen rows.
Now we will divide our loops into four equal parts. That is, now we will knit only six loops. We knit them with the same pattern.
photo 3



We knit seven to eight centimeters and put the loops on a thread so that they do not bloom.
photo 4



We knit the next six loops in the same way. Then the next six and the last six. We got four stripes.
photo 5



We begin to form the overlap.
Place the middle left stripe over the middle right one.
photo 6



Then we put the right extreme on the left middle.
photo 7



And we draw the left extreme under the right middle strip.
photo 8



The overlap is formed. Now we carefully put the loops on the knitting needles as they go in order in the overlap. We remove the threads from the loops. We won't need them anymore.
photo 9



We continue to knit the pattern. But here it will be a little uneven in the first row, since we have reversed the stripes. This will not be visible in the finished product.
Just start knitting from the edge with the front loop.
We knit another seventeen centimeters.
And we sew our bandage with a needle. You need to sew from the seamy side, hiding the remaining tail of the thread inside the knitting.
Decorate the middle with beads.
The headband is ready.

Another headband from Anna (crocheted).


An alternative to a hat is a knitting headband. There are women who categorically do not like to wear hats, firstly, they do not suit everyone, and secondly, the hat spoils the hairstyle, it is hot in it, and so on. A knitted headband is another matter entirely. Let's tie stylish and eye-popping headbands for women, models featured in fall / winter 2018/19 magazines. Description diagrams are attached.

An interesting headband with braids associated with an overlap, a shawl and mitts - all this makes up the "Winter Cold" set. For knitting you need threads - wool and polyamide - 3 skeins. This turban headband has an interesting pattern, the diagram is attached. The size of this original headband is 54-56 cm. Designed by Drops Design.

The shawl will turn out to be 37 cm high and 129 - wide. Mitts size: S, M, L. At the bottom, the circumference of the mitts will be: 15.5, 17, 18 cm. Above - 17.5, 18 and 19 cm. The length of the mitts is 15.5, 16, 17 cm.
Abbreviations: Loop - p., Row - p., Front loop - persons. p., purl - worn out., yarn - nak.

The knitting density is:

  • 19 p. / 38 p. = 10/10 cm. - 4.5 mm needles. (it is more convenient to knit a shawl on circular).
  • 21 p. / 28 p. = 10/10 cm - on needles 4 mm thick, garter stitch.
  • 21 p. / 42 p. - on needles 3.5 mm thick.

The yarn is used: Drops Sky number 08 (74% alpaca, half-mid, wool) - 50 g / 190 m
If you have not bought this particular yarn - pay attention to the thickness of the thread! How to replace one yarn with another? Take the needles of the thickness indicated in microns, for example - 3.5 mm. And knit a 10/10 cm "probe". Then see how many rows and loops you have in the "probe". And, based on this, add or subtract the thickness of the yarn (in 1,2,3 threads).

We knit on needles 4 mm thick. Cast on 51 sts (product width), and knit 1 row worn out. The next p. - front. We knit it according to the scheme A.-1, plus 1 edge p. On both sides. We look at the pattern:

So knit according to the scheme of repetition of 4 rows. We measure it with a centimeter of 21 cm. It is advisable to tie it to the end of the circuit. We put on the last 25 sts of the row for extra. knitting needle and leave on the additional knitting needle. In the meantime, we will work with the first knitting needle, it has 26 sts.

We knit according to the same scheme A.1, only at the end of the river. we collect 1 p., - on the first knitting needle we have 27 p. So we knit 16 p. (4 repetitions of the scheme), in the last p. afterbirth. p. knit 2 p. together. Do not touch the first knitting needle yet - leave it as it is. Hinges with add. We transfer the knitting needles to the second knitting needle, add p at the beginning and end. on 1 p. On the second spoke 27 p. Perform again 16 p. schemes, in the last. R. close at the beginning and at the end of 2 p. together. Remaining 25 p.

Then we will do before overlapping. There is nothing complicated: put the first knitting needle on the second, remove the stitch from the first knitting needle. As a result, we should have one spoke. That is, we again have 51 sts on the spoke. We mark this place with a marker or a pin. We must knit another 21 cm from the marker according to the scheme A. 1. Then another 1 out. R. and close all the loops. Sew the knitted edges of the bandage with a needle with a native thread.

The shawl is knitted with a garter stitch (one person. R.) with a pattern in the middle. On needles 4.5 mm thick. we collect 15 p.

1st front p .: 1 person., Nak., 2 persons., Nak., Scheme A.2 (9 p.), Nak., 2 persons., Nak., 1 person. - that is, in this p. we added 4 p. = 19 p.
2nd p .: 1 person., Nak., 4 persons., 9 p. Scheme A.2, 4 persons., Nak., Persons. added 2 p. = 21 p.
3rd p .: 1 person., Nak., Persons., 9 p. Scheme A.2, 9 p. Scheme A.2, nak., 3 persons., - in this p. added 4 p. = 25 p.
4th p .:
Next, repeat the 2nd and 3rd p. to a height of 36 cm. That is, in the 4th p. you need to add 2 points, in the 5th - 4 points, and so on. At a height of 36 cm, close p. Persons.

Mitts

On needles 3.5 mm thick. Sizes S; M; L. We collect 35/39/41 sts and knit: 13/15/16 sts with one facial, according to scheme A.2, and again 13/15/16 persons. Next, knit to a height of 10/11/12 cm.Add 1 st at the beginning and end of the river, you get 37/41/43 sts. Then work up to 15/16/17 cm from the beginning of knitting, close all sts. like persons. Sew using the long remaining tail of the thread. We knit the other mitt symmetrically to the first one.

Before tying the headband, we decide on its thickness. We need a warm bandage for a woman's bandage, such as a turban or turban, which means that yarn should be chosen with wool, or with mohair, or with alpaca.

In this work for knitting we use Drops Merino Extra Fine yarn from Garnstudio, number 01. Yarn - 100% wool, 50 g / 105 m, 1 skein.

Needles 4 mm thick. The size of the head is 56-58 cm.The height of the bandage is 10 cm, its length is about 52 cm.

Knitting density: 21 p. / 28 p. persons. stitch - 10/10 cm.

Knitting density: 21 stitches x 28 p. front satin stitch = 10 cm x 10 cm.

Pattern scheme:

How to knit a headband:

We knit in pivoting rows and sew on the back with a needle and native thread.

Cast on needles 4 mm thick. 30 p. And perform 1 out. R.

2nd p .: we knit according to the scheme A.1 (repeat the rapport 6 times), it turned out 30 p. + 6 p. Not knitted (black cage).

3rd p: now we knit all p., And we get 36 p.

Further, after we have completely knitted pattern A.1, we knit pattern A.2. We continue to work with pattern A. 2 for another 26 cm, then we need to make an overlap in the middle of the work: transfer the first 18 sts to the auxiliary joint, knit the next one. 18 p., And then - 18 p. With auxiliary. knitting needles. We work further according to scheme A.2. until the length of the bandage reaches 48-49 cm. Next, knit according to pattern A.3. After you have completely knitted pattern A.3, you should have 30 stitches left. We knit the last p. persons., all items are closed. Sew both parts of the bandage with a needle.

On the video - knitting a headband "Bow":

Headband with braid pattern

Bandage size 55-56 cm

The usual pattern of this pattern is used in scarves, hats, and so on. Try it first on a probe - it will be easier for you to knit the product itself.

For the bandage you will need 1 skein of Lana Gold yarn (50% wool, 50% acrylic, 240 g / 100 g. Knitting density - 17 p. / 22 p. = 10/10 cm. Knitting needles 6 mm thick., 1 auxiliary knitting needle , 2 small auxiliary knitting needles, thick needle.

Cast on 30 sts on 6 mm needles. We begin to knit with braid according to scheme 1:

After the 8th p. knit again 1st row. And so on until we knit 23 cm. We finish in the 6th out. R. Schemes 1. Next - there will be a division of knitting into 2 parts. Starting from the 7th p. we knit the first part of the strip according to scheme 2. Repeat 8 rows 3 times. We transfer the item to the auxiliary knitting needle.

Return to the abandoned lane. We attach the thread and we carry out the second strip according to the scheme 3. We knit according to the scheme 3 - three repetitions.

Then we combine both knitting needles into one and knit according to scheme 4, starting from the 3rd row, until we knit 23 cm.You can close all the loops and sew the edges, or you can not close the stitches, but connect the beginning and end of knitting with a knitted or crocheted stitch ...

At the shows of collections in 2018, a real sensation was made by accessories for the head, which complemented all fashionable bows. The headband fits into any stylistic ensembles.

Knitted head jewelry quickly gained popularity, and for desperate fashionistas they have become a must-have in wardrobes. Due to its versatility, the bandage gradually becomes higher than some style.

The knitted headband has no age limits. It can be worn by a girl, teenager, girl, woman or an elderly lady. And children's knitted openwork headbands are worn on the head even for newborns.

In summer, they are useful for fixing or decorating hair. In the cold season, a bandage is an alternative to thick hats. The latter can ruin a beautiful hairstyle. In order to be “in touch”, that is, to be in line with fashion trends, it is not necessary to buy a headband from expensive brands. You can make a stylish knitted product with your own hands.

Summer options for headbands are made of thin thread. In autumn and winter, warmed models, knitted or crocheted, look organically with clothes. This article provides different techniques for creating fashionable headbands, describes in detail how to understand the diagrams, and step-by-step instructions are attached.

Children are superbly festive
photo set
bright image


There are simple knitting techniques for beginners that even a beginner can handle. For a needlewoman with skills, more complex ways of doing it will be interesting. This designer knitted headband is an exclusive, one-of-a-kind item that is not available on the mass market.

A well-chosen shape, color, original decor, adherence to recommendations and your desire are the key to the success of handmade work.

Matching yarn for headbands

The style of the future knitted product on the head depends on the composition, texture and thickness of the threads. The denser they are, the more prominent and voluminous the result will be. A combination yarn is suitable for a warm bandage, the same as for scarves, mittens or hats.

Brand names.

  1. Bouclated.
  2. Winter.
  3. Rovnitsa.
  4. Thin.
  5. Pehorskaya.
  6. Semenovskaya.
  7. Children's.
  8. Tweed and others.

Usually, for a headband, they take yarn containing at least 30-40% natural fibers from the following types of wool:

  • alpaca;
  • merino;
  • camel;
  • angora;
  • mohair;
  • cashmere;
  • kangaroo;
  • down - goat, rabbit, mink, yak;
  • additives - various types of acrylic, sequin, polyester, elastane, microfiber.

The optimal thickness is 250-300 m / 100 g, the density of the thread is less than 100 m / 100 g will make the knitted bandage coarse. This result is not needed. Thin headbands are made of knitted or summer yarn from cotton, bamboo, linen and viscose.

How to read patterns and patterns

Novice needlewomen, seeing a table with symbols, may think that they are in front of the Chinese alphabet. Dealing with the symbolism is not difficult. The description of a knitted figured pattern or ornament for a headband takes a lot of time, usually these are large texts. They are inconvenient to read and easily confused.

To save energy and ease of understanding, it is customary to make knitted patterns in patterns, where each loop has its own designation.

Abbreviations are marked like this:

  • lp - front;
  • un - worn;
  • p - loop;
  • nk - cap;
  • cr - edging;
  • p - row;
  • cpl - crossed lp;
  • vulture - crossed SP.

It is customary to read tables from left to right and from bottom to top, similar to the position of the canvas in front of you. All front - odd numbers of the rows need to be knitted according to the pattern, purl - even numbers are made according to the pattern. That is, if LP is indicated in the table on the main side of the pattern, then PI is automatically knitted with the reverse.

In a complex technique, all loops can be prescribed, not excluding the wrong side. Each diagram is indicated by arrows or frames. This is a rapport - a repeating number of stitches that make up part of the pattern.

Let's consider an example:


Note that each diagram is accompanied by a legend for ease of reading. The rapport is highlighted with a frame, it can be repeated several times, but the number must be a multiple of the number of loops.

It can be seen from this table that its height is 16 rows, and its width is 12 points + 5 additional ones included in the design of the pattern. Apart from the indicated number in the scheme, you need to dial more by 2 points, which will be edging.

Let's start with an easy one - the simplest dressings

When purchasing yarn, check the softness of the fiber. Spiky headbands can chafe your forehead, causing discomfort when worn. The most basic way for beginners is to knit with an elastic band with an overlap in the center. This is the alternate knitting of the front and back loops. Any proportions: 1x1, 2x2, 3x3 or 2x1, 3x2, etc.

The larger the gap, the more pronounced the pattern of the English elastic band on the headband. Detailed description of the work.

  1. You need to start by measuring the head circumference (OG).
  2. For example, the exhaust gas will be 54 cm.
  3. For registration of an overlap, 10 cm is enough.
  4. This means that 54 - 10 = 44 cm. Subtract another 4 cm so that the bandage fits snugly on the head. Remains 40 cm, we divide them in half. Each part of the canvas needs 20 cm.
  5. An average bandage width of 10 cm is 26 loops + 2 hem = 28.
  6. Knit 20 cm with an elastic band.
  7. Divide the number in half, 28/2 = 14.
  8. Put one half on a pin, knit the other with an elastic band 10 cm and fasten.
  9. Repeat on the unconnected side.
  10. Cross two strips, put the loops on one knitting needle, knit the remaining 20 cm.
  11. Take a needle, pick up such an eyelet so that you can freely insert a thick thread. Sew the two edges with a blind stitch.
  12. The product can be decorated with an original brooch, decorated with pebbles, beads or pearls.

Headbands for women

Arans, rice, braids, boucle, jacquard, spirals or plaits are all different knitting techniques. Many needlewomen believe that crocheting is more suitable for openwork cotton models. There are a lot of interesting and simple methods on how to sew a summer headband with your own hands. Experienced craftswomen describe their technology.

From thick yarn, you can knit a voluminous beautiful boho-chic headband, which is suitable for tall, stately women.

Little tricks.

  1. The length of the yarn and the thickness of the knitting needles for the bandage should be in accordance with the instructions used.
  2. There are usually several sizes indicated in the table, immediately mark the ones that apply to you with a marker.
  3. Do not be lazy to make a small knitted pattern 10x10 cm, cut out a similar pattern from cardboard. Compare the two parts for a match, this will allow you to select the knit density or the number of knitting needles.
  4. Start with simple techniques, after mastering them, move on to more complex patterns.
  5. Use circular knitting needles for a knitted seamless headband.
  6. Cotton yarn is pre-washed at the maximum permissible water temperature so that it shrinks.
  7. The rubber knitting needles come in handy to keep the loops from slipping.
  8. It is not necessary to introduce a complex pattern into a knitted product made in the cross-section technique. The constant change in the number of loops will inevitably lead to a displacement of the rapport.
  9. It is better to take the working (auxiliary) knitting needle half the number smaller than the main one.

Below are the schemes by which you can make beautiful headbands in different styles. Fashion accessories of author's handwork on the Domestic website are shown in the photo.


Excellent festive
set is unusual
vivid image photo

Knitted headbands with needles with a description

Many women often face a problem when a child refuses to wear a hat. Girls can refer to discomfort, that the head itches, hair gets tangled, there are many reasons.

A good and practically the only way out is a knitted fashionable warm headband. Even if you have never held knitting needles in your hands, you just need to follow the recommendations for the execution technique. In the off-season, a good option would be to knit a headband for a girl made of acrylic, in winter - made of wool.

Schemes for creating beautiful knitted headwear.

With pebbles.

  1. We make a headband for girls from 6-12 years old.
  2. Table based on 56 cm OG, 35 g of yarn, needles No. 3.
  3. Shawl technique - on the one hand, all facial, on the other - purl.
  4. Cast on 35 stitches, work 105 rows.
  5. Sew the edges, pull tight with a thread of the same color. The bandage around the seam is done tightly in several turns.
  6. Sew a knitted headband with rhinestones, stones or sequins.
  1. Making a bandage for a girl under 2 years old.
  2. At the rate of 46 cm OG, straight needles No. 3 or a hook, cotton yarn with acrylic 30 g + decor with a beautiful flower.
  3. A circular knitting is performed, which begins with a set of 100 loops.
  4. Perform the rows. The first - 3 lp (front) + 1 n (yarn) + 3 p in 1 lp + 1n. The third - 1 n + 3 p in 1 lp + 1 n + 3 lp, the second and fourth - all purl.
  5. Repeat the rapport until you reach 5 cm.
  6. Close the loops, sew one large or many knitted miniature flowers.

Knitted headband patterns for women with step by step instructions

Most of the technical execution charts can be used equally for girls and adults. Master class with a detailed description of the work.

  1. Yarn - 170 m / 50 g wool 55% + acrylic 45% in three different pastel colors, for example, soft pink + white + gray, needles No. 3.
  2. Cast on 15 loops of thread of the same color, knit 25 cm, technique - 1x1 elastic.
  3. Repeat with yarn of other colors.
  4. Weave a braid from the three strips obtained.
  5. Sew each edge in color.

Knitted headbands

Regardless of the chosen devices - you are going to make the product with knitting needles or crochet, a bandage is intended for girls or an adult, an important detail must be taken into account.

When working with schemes + looking at the author's examples in the photo, you must understand how the result will look like. If some designation or detail in the table is not clear, it is better to choose another option. There is a risk that a distorted drawing may result.


Baby flower best
kids with beads fashionable
a lot of colors in the kindergarten

Beautiful and fashionable headbands

If you go back a few years, you will notice that it was originally a male accessory. It was worn by football players, tennis players and wrestlers. Gradually, bandages began to appear in the wardrobe of women. And when the fashion for retro 50-60s returned, accessories in the style of pin-up, boho-chic and others became trendy.

The current fashion is so democratic that it allows you to bring any creative ideas to life. The main thing is that the knitted stylish headband is matched to the clothes and creates a complete image. Often, a simple elastic band or garter stitch with a brand logo makes knitted stripes more effective than complex patterns in flashy colors.

However, the direction of style does not depend on the execution technique, but on the shape, texture of the fabric or yarn.

Fashion trends 2018:

  • weaving - a classic single braid with a transverse pattern or many narrow bundles, usually made from a thick thread;
  • sports - a tight-fitting elastic strip, which is worn so that bangs or hair do not interfere, can be sewn from jersey or made with knitting needles;
  • headphones - a bezel with fur pom-poms for ear warming;
  • turban - a wide knitted fabric with overlapping stripes in the center, often decorated with a brooch, you can make two or more links, shift the emphasis to the side;
  • animalistic theme in the style of rabbit band - for girls they make patterns in the form of animal faces. Models with ears of a cat, frog, giraffe, etc. are suitable for all ages;
  • solokha - a knitted fabric with a wire inside, which is fastened by twisting the ends, the soft ends can be tied in a bow on the side or in the front;
  • turban - a strip, pulled together in the center, is often performed in a two-color scale;
  • oversized - knitted volumetric products from three canvases, woven into a braid;
  • openwork - a seamless pattern of cotton threads, often crocheted;
  • decor - kanzashi (Japanese bow folding technique), buttons, beads, rhinestones, metal or wooden accessories, flowers and other options.


Dear needlewomen, today I have prepared for you an article on knitting women's headbands with knitting needles with diagrams and step-by-step descriptions. Consider models in different styles so that you have a choice for every taste. For many girls and women, such a headdress replaces a hat in the off-season, others wear it in winter. How to tie a fashionable headband?

Headband "Warm lavender"

Stylish and feminine headband for girls

This cute knitted headband from design studio Drops will come in handy in autumn and spring. A knitter will be able to knit it, even with little experience, repeating the steps described.
Sizes: 54-56; 56-58; 58-60 cm
You will need:
- 100 grams of Eskimo yarn, 100% wool, 50m / 50gr;
- knitting needles number 7
Density:
12 p. Stitching = 10 cm

How to tie a headband?

  1. On the needles, cast on 22 loops and knit according to the pattern No. 1 - 14/15/16 cm, stopping the knitting in a purl.
  2. Then knit with pattern # 2 - 1 rapport in height, 10 sts left.
  3. Next, overlap according to scheme No. 3 and continue with pattern No. 4 - 1 rapport, as a result, again 22 p.
  4. Finish knitting the headband according to pattern # 1, the total length should be 48/50/52 cm.
  5. Sew a seam.

Pattern of knitting headbands Warm lavender

Bright accent

A bright accent for a good mood

The next option: let's figure out how to knit a bright warm headband with braids with knitting needles.
Length 48 cm, width 12 cm. Specify the size during knitting.
You will need: 100 grams of Drops Ande yarn, 65% wool 35% alpaca, 96met / 100g and needles # 6.
Density 13 p. = 10 cm

Description of knitting headbands:

  1. Cast on 30 sts and tie with an elastic band 2x2 (2 faces, 2 life) 12 cm.
  2. Next, distribute the drawing as follows: 2 persons., 2 persons., 2 persons., A 1, A 1, 2 persons., 2 persons., 2 persons., 2 persons.
  3. Knit until the bandage reaches a length of about 36 cm (it is necessary to knit a full rapport according to the scheme), then continue with the pattern of the elastic, as at the beginning of knitting at a length of 48 cm (total). Sew both edges.

The easiest headband for beginners

Simple model for beginners

For those who are just picking up knitting needles for the first time, it is difficult to complete a complex pattern. Look at the photo: a stylish women's headband is knitted with a completely simple pattern on the needles, even a beginner knitter can handle it.
For a knitted strip, you need 100 grams of Drops Eskimo yarn, 100% wool 50g / 50met and knitting needles # 9.
Density: 8.5 p. = 10 cm

  1. With a thread in 2 additions, cast on 42 sts and knit 1 p. facial and 1 p. purl loops.
  2. Then go to the elastic 1x2 (1 person., 2 life.) And continue 13 cm.
  3. Finish work 1 p. facial p. and 1 p. purl. Close the loops and sew a seam.

The beige bandage in the photo on the right is knitted in exactly the same pattern, but with a different pattern - a 2x2 elastic band (2 persons, 2 life). All the rest of the description and calculation of the loops is the same in both styles.

Headband Ice Princess by Drops

A volumetric braid pattern will decorate any product

Making a bandage for women with knitting needles is also not difficult. Follow the pattern in the description.
Prepare Andes yarn, 65% wool, 35% alpaca, 96met / 100g and needles # 6.
Density: 13 p. = 10 cm
Cast on 19 sts plus 2 hem and knit exactly according to the pattern. Check the length of the product according to your measurements.

Braid dressing scheme

Three-color women's bandage with needles

Tie three strips of different colors and braid

In the magazine "Knitted piggy bank" I met an interesting headband for spring or summer, tied with ordinary long stripes of different colors, woven together in a pigtail. You can choose any colors for your wardrobe.
For knitting this version of the headband, even a pattern is not needed. Take yarn of 3 shades, in the original it is Jeans, 55% cotton 45% acrylic, 160met / 50gr, but you can choose any one and tie three long strips with a 1x1 elastic band, braid them, sew them according to the color. To figure out how to knit the length of a strip, do 3 strips of about 40cm, pin them with a pin and try on your head to estimate the size. If it is not enough, continue to work to the required measurement.

Overlapped knit headband

Small pearl pattern is a good choice for knitting headbands

To knit a female headband you will need:
- Andes Drops yarn 65% wool, 35% alpaca, 100 grams 96 meters - 50 grams;
- knitting needles number 7
Pearl Pattern:
1p .: * 1 persons., 1 out. *
2p .: on persons. knit purl., over purl. - facial
Density: 12 p. = 10 cm

Knitting pattern:

  1. First, cast on 16 sts and knit 20 cm in basic stitch.
  2. Divide knitting in half and continue to work only 8 sts in length 9 cm, finish with purl p. Cut the thread. Next, go to the left 8 sts and knit 9 cm, finish purl.
  3. Then unite all the loops and tie a bandage with a total length of 50 cm.
  4. Close all stitches and sew the first and last rows.

Video master class on making a female headband with a binding with a different pattern:

Knitting a turban quickly and easily

Simple and easy

One of the popular styles of knitted headbands is. They are made from shawls, chiffon, knitwear, even fur. And, of course, knitters cannot pass by a spectacular model. And knitting a turban bandage on knitting needles is so simple that even a beginner knitter will cope with knitting, especially if you carefully read the diagram and description.
In this master class, I will not offer a specific yarn. Knit from any available. Maybe after knitting a sweater there is a hack - start it up. In a bandage, the only size is its length. Well, the width can be different.

  1. It was for this model that 26 loops were typed, of which two are edging.
  2. Remove the first loop, then knit with an elastic band 2x2 (2 persons., 2 life), knit the last loop with a purl.
  3. Knit 20-22 cm, then divide the stitches in half and continue to knit each half separately for a length of about 6 cm.
  4. When the two halves are ready, overlap one half over the other and then knit both parts together. We close the loops and sew the first and last rows.

The second version of the bandage of the turban on the needles

The overlap in this bandage for women on the head is performed in a different way.
Would need:
- yarn with parameters 125met / 50gr, 150gr of red color, 100gr each of light and dark gray;
- knitting needles number 5

Scheme of work:

  1. Dial 38 sts in red and knit a strip with the front satin stitch (front p. - front p., Worn out -
    purl) 58 cm long.
  2. Then knit a second strip of 38 stitches with stitching, alternating 4 p. light gray thread and 4 p. dark gray 58 cm long.
  3. Next, take one strip, fold it in half. Thread the second piece through the loop and line up the ends. Sew the first and last rows.
  4. To tie the bib, cast on 146 sts on the circular knitting needles with ginger yarn. and tie 22 cm with an elastic band 1 by 1 (1 person., 1 life.), then 22 cm, alternating 4 p. light gray tone and 4 p. dark gray.

Based on materials from Sandra magazine

Video MK - Solokha's female bandage on the needles:

Bulky model with thick yarn


Head volume: 54-56 cm, width 12 cm
Would need:
- 100 grams of Drops Polaris yarn
- knitting needles number 12
Density: 7 p. = 10 cm
For a shower jacket: height 30 cm, circumference 54 cm, consumption 300 grams of the same yarn.

Drawing English elastic band on straight knitting needles:
1p: 1 p. With a scarf, * 2 p. Together persons., Yarn, remove 1 p. As purl. * - repeat from * to *, finish 2 sts together and 1 st with a handkerchief tie.
2p .: 1 p. With a scarf, * 1 yarn, remove 1 p. As worn out, knit together the front yarn and the removed loop *,
- repeat from * to *, finish 1 point with a wire tie.
3p .: 1 p. Plat.v., * knit together the yarn and the removed p., 1 yarn, remove 1 p. As purl. * - repeat from * to * until the moment there is 3 sts in the remainder, knit the faces together. yarn over and removed p., 1p. payment in.
Repeat rows 2 and 3.

English gum in a circle:
1p.: * Yarn, remove 1 pet., As purl., 1 person. *
2p.: * Tie the back p. Together with the yarn and the removed p., Yarn, remove 1 p. As purl. *
3p.: * Yarn, remove 1 p. As worn out., Knit together the front yarn and the removed p. *
Repeat rows 2 and 3.

Knitting description:

  1. Dial 10p. and knit with English stitch on straight needles 55 cm, close the loops.
  2. Twist the strip once and sew with an invisible seam.
  3. For the clamp, dial 38p. and knit in an English pattern round and round until the product is 30cm high, close the loops.

Set "Ice Crystals" New model


Gorgeous knitted bandage and snood set for women. Such an accessory will definitely find application in a women's wardrobe, made on knitting needles.
Prepare:
- Drops Polaris yarn, 100% wool, 36met / 100g - 300g for snood and 100g for a bandage.
- knitting needles number 10
Density: 7 p. = 10 cm
Snood dimensions: 31 * 67 cm

Braiding pattern in a circle:
1p.: * First knit the second st on the knitting needle for the back wall, while the first stays on the knitting needle, then knit
the first p. front and remove both from the joint. * - repeat to the end of the row;
2p.: 1 person., * Knit the second p., Knit the faces., The first one is still on the cn., Then knit the first knit one and lower both *

Braided pattern on straight knitting needles:
1p.: * 2nd p. Knit worn out (the first on the knitting needle), knit the 1st worn out. and remove both on the other needle *
2p.: * 2nd p.p front twisted (1st remains), knit 1st faces. *

Progress:

  1. On snood, dial 37 p., Combine in a ring and tie 1p. purl and 1p. facial p., add 10p evenly. (= 47p.)
  2. Next, tie a braid to a height of 30 cm. In the last p. evenly subtract 10p., then 1 p. out.n.
  3. For a strip, dial 9p and knit with a braided pattern 51cm. Close the loops and sew around the edges.

White warm strip on the head with pigtails


You will need:
- 50 grams of Drops Merino Extra Fine yarn, 100% wool, 50gr / 105met;
- knitting needles number 4
Head size: 56-58 cm, width 10 cm, length 52 cm.
Density: 21 p. = 10 cm

Scheme and description of knitting a bandage on needles:

  1. Dial 30p. and do 1p. purl, then continue with pattern 1 according to the scheme in rotary rows (the rapport is repeated 6 times), in 2p. the result is 30p. plus 6p untied (black cage). In the 3rd p. tie all loops (= 36p.)
  2. After pattern 1, knit pattern 2 at a length of 26cm.
  3. Overlap stage: first 18p. transfer to auxiliary sp. and we knit other 18 p., then the first 18 p. with auxiliary sp.
  4. Then we continue according to scheme 2 until the length is 48-49 cm.
  5. Finish with pattern 3, you should have 30p at the end.
  6. One p. knit and close the loops, sew the beginning and end.

A selection of crochet stripes see

A beautiful headband is decorated with original braids.
I bring to your attention the technique of performing these braids.
For work, you need a half-woolen yarn (50% wool, 50% acrylic, 250 m / 100 g); knitting needles 3.5 or 4 mm.

The knitting density is about 24 p. And 30 p. = 10x10 cm.

DESCRIPTION.

Dial 48 p. + 2 chrome. (50 p.) And knit as follows:

2nd p .: chrome., 6 persons., 15 out., 6 persons., 15 out., 6 persons., Chrome .;

4th p .: chrome., 6 persons., 15 out., 6 persons., 15 out., 6 persons., Chrome;

6th p .: chrome., 6 persons., 15 out., 6 persons., 15 out., 6 persons., Chrome.;

7th p .: chrome., 6 persons., Bind 15 loops, 6 persons., Bind 15 p., 6 persons., Chrome;

Close 15 loops

Closed hinges create slits in the fabric

8th p .: chrome., 6 persons., Cast on 15 loops, 6 persons., Cast on 15 loops, 6 persons., Chrome.

Cast on 15 loops

Repeat from 1st to 8th row 14 more times (or as many times as needed to girth the head).

After the strip is connected with holes of the required length, make braids from the resulting shafts as follows:

Make a loop from the first wheel

Thread the upper steering wheel into the lower loop.

Repeat until all shanks are braided

Close the loops. Sew on 2 buttons or make ties. To prevent the braids from unraveling, carefully sew the last knuckles to the canvas.

Orange headband

A very stylish headband made of woolen knitting needles and decorated with a crocheted flower. Size: 54-58 You will need: 70 g of orange yarn (100% wool, 250 mx 100 g); knitting needles number 4.5; hook number 4; needle.

Work description

Cast on 35 loops with the auxiliary thread and knit with the main thread, distributing the patterns as follows: 1 hem, 1 purl, 1 patent loop, 29 embossed loops according to pattern 26, 1 patent loop, 1 purl, 1 hem.

After about 52 cm from the initial row (you also need to take into account that an integer number of rapports in height is made), knit with an auxiliary thread. Untwist the thread and sew open loops with a knit stitch. Tie a ribbon around the edges of the sc. For decor, tie a volumetric flower according to the 21 d pattern and sew on a ribbon. Scheme