Future mother 

Do-it-yourself pencil case for the school. Interesting and useful ideas on how to update your school pencil case with improvised materials with step-by-step instructions

In such a pencil case, not only pens with pencils will fit, but also scissors with a square.

You will need:

2 types of fabric (for the outside and for the lining);

Zipper 25 cm long or a little more;

A pair of stationery clips;

pins;

Scissors;

Sewing machine and thread.

Work sequence:

1. Cut out 2 pieces of each type of fabric measuring 25x16 cm each.


2. Lay one of the lining pieces face up on your work surface. Lay the zipper face up on top. From above - a detail from the main fabric inside out. Pin with pins, grabbing all layers of fabric and zipper tape, as shown in the photo.


3. Sew.


4. Lay the second piece of lining face up on your work surface. Place the parts with a partially sewn-in zipper on top, as shown in the photo. Then - a detail from the main fabric inside out. Pin the two layers of fabric and the zipper tape between them with pins.


5. Lay out a line.


6. Straighten the details and iron.

7. Run stitches along the zipper.


8. Open the zipper. Fold and chop the parts as shown in the photo. Direct the zipper towards the lining, and the allowances towards the main parts, and secure with clips.


9. Sew along the perimeter, leaving a hole, as shown in the photo above.


10. Cut off the corners, retreating a couple of millimeters from the seam.


11. Turn out the pencil case. To turn the corners well, you can use a stick.


12. Sew up the remaining hole.


13. It remains to fill the lining inside - and you're done. Finally, you can put a name tag on the clasp.


Photo and source: thediydreamer.com

2. Fabric pencil case with lining and front closure: a master class


Due to the reinforcement with interlining and a zipper in the front, such a pencil case keeps its shape well. Another plus is its capacity. If you want a smaller pencil case, resize the details and use a shorter zipper.

You will need:

2 types of fabric, main and lining (you can also use a patch of a third color to finish the zipper);

Adhesive one-sided interlining;

Zipper length 30 cm or more;

Water-soluble glue (glue stick is suitable);

Scissors;

Sewing machine and thread.

Work sequence:

1. Cut out the details of the pencil case. You need 1 rectangle from the main fabric measuring 30x35 cm, 1 the same rectangle from the lining fabric, 1 the same from non-woven fabric. Also - two rectangles 2.5x7.5 cm.


2. Glue the part from the main fabric with interlining.


3. Fold both small rectangles in half, as shown in the photo, inside out, and secure the folds with an iron.

4. Open the zipper halfway. Glue the rectangles to the ends of the zipper as shown in the photo.



5. Lay the line along the folds of the rectangles, as shown in the photo. Tie at the beginning and end of the stitch.



6. Now glue the rectangles as shown in the photo and cut the zipper tails on both sides.



7. Fold the lining and main fabric pieces face to face and place the zipper between them as shown in the photo. Peel off with pins.



8. Lay a line, stepping back 0.5 cm from the edge.



9. Unscrew the parts, as shown in the photo, and secure with an iron.



10. Wrap the parts, forming a pencil case, fold as shown in the photo, and pin with pins.



11. Lay a line, stepping back from the edge of 0.5 cm, and turn the pencil case inside out.




12. Sew off the seams.



13. Fold the pencil case so that about 2.5 cm remains from the zipper on top, and fix the folds with an iron.


14 . Lay the lines on the sides, stepping back from the edge of 1.5-2 cm, then trim the edges with scissors.



15. Turn the pencil case inside out, straighten the corners well. Lay the side stitches as shown in the photo.

In this article we will talk about how to make a pencil case for school with your child.

It's no secret that any child wants to have school supplies that are not only easy to use, but also allow them to stand out among their classmates. And what can help you stand out better than a thing made by hand? Let's talk about pencil cases today.

Beautiful, cool do-it-yourself school pencil cases: ideas, photos. How to decorate a school pencil case made by yourself?

So, for starters, you can get acquainted with the ideas. Will any of them inspire you?

How to make a beautiful pencil case for school out of paper and cardboard: a master class

For similar school accessory useful:

  • Cylindrical Cardboard Tube

IMPORTANT: In order to facilitate the work, you can not glue a similar pipe separately, but take it ready. For example, from under a paper towel.

  • Wrapping or plain colored paper
  • multi-colored cardboard
  • Elastic band - preferably wide. And colored
  • Hole puncher
  • Stationery knife
  • PVA glue or double sided tape

Procedure:

  • You need a cardboard blank cut with a knife into two parts.
  • Each of the received parts is necessary carefully wrap in colored paper. For fastening, both glue and tape are suitable.
  • Now stands roll colored cardboard into a tube so that the cylinder from it could be placed inside the workpiece described above.

IMPORTANT: Colored cardboard should protrude from the top cylinder by about 3-5 cm.

  • Then it's worth taking a smaller part cut cardboard cylinder (something like a cap). In it, parallel to each other, it is necessary to form a hole punch two holes.
  • In these holes you need thread an elastic band, securing it with knots. Such an elastic band will help the pencil case close tightly.

How to crochet and knit a pencil case for a school for pencils and pens: a diagram with a description

Such a pencil case does not require any complex patterns, it is very easy to manufacture. For a similar pencil case for beginners in knitting will need:

  • One skein of yarn

IMPORTANT: The yarn needs to be thick enough - in this case, the pencil case will keep its shape perfectly.

  • Needles or hooks
  • thick needle
  • Button

So, you can start:

  • Need to start with 30 air loops. After counting the second loop from the hook, you need to create 29 columns. The yarn is not required.
  • Now the second row. Worth creating lifting air loop.
  • In the next row you need to do 29 columns. The yarn is no longer needed.
  • Once the height of the rectangle reaches approximately 23 cm, the second row can be completed.
  • 2 sc
  • Skip 2 stitches
  • 5 sb, carried out in one loop
  • Skip 2 stitches
  • Skip 2 stitches
  • In one loop - 5 dn
  • 2 sc
  • Air loops in the amount of 10 pcs.

IMPORTANT: You need to thread it into the same loop that appeared in front of the air loops.

  • Skip 2 stitches
  • 5 sn, carried out in one loop
  • Skip 2 stitches
  • Skip 2 stitches again
  • 5 d in one loop
  • Skip 2 stitches
  • 2 sc
  • bottom edge the resulting rectangle should turn up.
  • top edge, which with a festoon, on the contrary, is necessary turn down.
  • Side seams worth processing single crochet.
  • At the final stage button is sewn on.

How to sew a fabric school pencil case: patterns, instructions. How to make a school pencil case for girls without a zipper with your own hands?

For a girl, you can make a simple but elegant fabric pencil case. For him needed:

  • Textile
  • Scissors
  • hot glue gun

The accessory is made without sewing as follows:

  • A piece of rectangular fabric fold in half as shown in the photo

  • Side edges necessary cut

IMPORTANT: Doing this is exactly.

  • top hem also desirable cut

  • With glue joining the sides blanks

  • Now you have to take separate neat strip of fabric and attach it approximately to the middle of the blank envelope

  • The strip can then be glued on. But be sure to the bottom of the workpiece

Penal is ready! How to use it?

  • To the center Envelope fits pens and pencils

  • They covered one part of the envelope

  • Then only remains tie in a knot glued strip

From fabric, you can make other pencil cases for girls. Here, for example, pattern for a pencil case-kitten:

How to sew a zippered felt school pencil case for boys?

Pencil case materials:

  • Lightning
  • Threads
  • Needle
  • Scissors

The work should go like this:

  • From felt you need to prepare 2 rectangles

IMPORTANT: The width of one should be about twice the width of the other.

  • Lightning needs to be positioned between these pieces of material
  • Now it is necessary sew in
  • Position the workpiece so that most of it was on top., A lightning - closer to the left edge
  • Now a silhouette of a whale is drawn. Lightning should fall on the mouth
  • Whale cut out
  • Need to cut another silhouette
  • Now it's your turn eye

IMPORTANT: For them you will need a white circle of felt and a black button.

  • Can be cut from white felt and fountain
  • Turning the workpiece inside out, you need to flash
  • Only after this can turn the whale right side out

How to sew a pencil case for school out of jeans? How to sew a pencil case for teenagers and high school students of girls and boys with your own hands?

Old jeans can be found in almost everyone. Especially in teenagers. It is quite possible to give them a second life in the form of a fashionable cosmetic case, for which you will need:

  • Two pieces of denim, each measuring 26x12 cm
  • Lining fabric of the same size. It is desirable that it be linen
  • The same size piece of batting
  • Zipper length 25 cm
  • Wax pencil, needles, threads, scissors. Sewing machine preferred
  • decorative elements

IMPORTANT: Additional pieces of fabric are needed precisely in order to better protect school supplies from impacts.

How to make a pencil case? Worth following is a simple guide pattern, which is also suitable for making cosmetic bags:

Dimensions can of course be changed. However, it must be remembered that Leave a seam allowance of at least 1.5 cm. Accordingly, the length of the lightning will also need to be changed.

In order to make a stitch, you can use the following scheme:

  • are being drawn lines wax pencil. The fastening of batting with jeans can be done with ordinary pins.

  • Then you can make sewing, then repeating the same with the second piece of denim.

  • The turn has come attach zipper. Its front part needs to be stitched to denim with batting.

  • Now it's your turn linen lining. It needs to be stitched to the back of the zipper.

IMPORTANT: The lining must first be basted or simply folded over.

  • On both parts of the workpiece, you need to sew a zipper in the same way. As a result, you will get 4 pieces of fabric attached to the zipper from different sides.

  • Now you need to unzip and connect the fabric around the perimeter. The same must be done with the lining. It is desirable at the same time cut the corners of the linen lining So they definitely won't get in the way.
  • All that remains is turn out pencil case face out and put a lining in it.

How to sew a pencil case for a school with two compartments for a first grader? How to sew a pencil case for a math school?

For a pencil case with two compartments that will fit a lot of pencils and pens, will need:

  • Pieces of leather or at least A4 leather substitute - 2 pcs. They can be found in haberdashery workshops or just use an old unnecessary bag.
  • Colored pieces of leather
  • Zipper long
  • Thicker nylon thread
  • Needles - 2 pcs.
  • Paper or newspaper to create patterns
  • Eraser, ruler, pencil or pen, chalk, scissors
  • Lighter or matches
  • Awl, hammer, iron
  • Cutting board
  • Wax with scalpel desirable but not required

You can get started:

Draw on a piece of paper pattern. Convenient size - 245x195 cm. It is advisable to immediately round the corners.

IMPORTANT: To do this, you need to take some round object with a diameter of about 5 cm.

  • The resulting pattern is needed attach a piece of leather to the wrong side. After tracing, you need to cut two blanks. If thick leather is used, there is no need to leave a distance for allowances. If the work is carried out with leatherette, it is worth leaving 1-1.5 cm for the allowance.

  • If the material is thin, it is recommended to process it dublerin. To do this, you need to cut out two pieces of dublerin according to the pattern, which must be attached to the wrong side of the skin and ironed. It is recommended to place a dry cloth on top.

  • It's time for the decor. If you want to make a pencil case in the form of a sheet of a school notebook, you can make markings for such a sheet on a white front piece of leather.

IMPORTANT: The most important thing is to draw all the details in a mirror image.

  • Now markup needs to be stitched on a sewing machine. The ends of the threads are pulled to the wrong side.

  • Further, from pieces of colored leather, you can cut any application - numbers, letters, letters. The main thing is to draw them in a mirror image on the wrong side of the material. Then pictures cut out and sewn onto the pencil case.

  • If the edges of the workpiece are not rounded, it's time to fix it., smearing the corners with glue, and then nailing them with a hammer. The latter should be done through the fabric.

  • Time to put on the zipper. To do this, it is not completely unbuttoned, glued down in the middle of the pencil case as shown in the picture.

IMPORTANT: If the zipper has a metal tip, it is advisable to carefully cut it off and burn the cut line.

  • Then the zipper needs to be glued around the perimeter future pencil case. Its other end is glued similarly to the first, but only opposite it.

  • Time to work over the inside of the canister. With an awl on its front side, it is worth marking the places where an elastic band will be attached to hold school supplies.

  • cut off a few pieces of rubber.
  • Cut with scissors or scalpel holes, through which the rubber bands will be attached.
  • Rubber bands are threaded through the holes and fastened with a sewing machine.
  • Both front and back parts need glue. But it is also desirable sew. To do this, with the help of a ruler and an awl, you need to do, stepping back 2-3 cm from the edge of the pencil case, marks.

  • Now you can take thick nylon thread. It is advisable to treat it with wax - so it will not fluff and it will become better to slide. The ends of the thread must be threaded into different needles. When one is threaded into the hole, the second is threaded into the next hole towards the first. At the end of the knots, you don’t need to do it - it’s just worth burn the ends.

Such a pencil case can fit not only pencils, pens, but also mathematical accessories like a ruler. You can decorate such an accessory with numbers.

As you can see, making a pencil case with your own hands is not so difficult. A little patience and a drop of imagination - and now the original school accessory for the child is ready!

Different design options for homemade pencil cases: Video

A pencil case is a useful thing if you need to organize your workspace. Pens, pencils, felt-tip pens, erasers and other necessary items are not scattered on the table and are not lost in the bag.

And school pencil cases are just as necessary for children as notebooks or a diary.

But those sold in stores are often too bulky, with ugly monotonous patterns (pencil cases for girls - with pink fairies, for boys - gloomy dark blue cars, and there are almost no alternatives!), And some of them are sometimes dangerous. - Poorly made plastic edges or a protruding tip of the fishing line can be scratched.

An attempt to buy such a necessary thing at school turns into torment. But you can sew one yourself with the help of the videos presented in this article - it will take quite a bit of time, soft fabric will never cause scratches, and the choice of its color is up to you.

How to make an original pencil case with your own hands? In this step by step photo tutorial you will see that it only takes five steps.

You will need:

- a piece of canvas (18 x 7 cm);

- three multi-colored cuts of the same fabric - you can take any, for example, linen:

  • the first of them is 18 x 4.8 cm;
  • the second - 17 x 5 cm;
  • third - 17 x 5.8 cm;

- lining fabric - 17 x 18.5 cm (if the lining is not always visible, this still does not mean that it should be boring and one-color, a good thing is beautiful from all sides);

- a piece of batting 17 x 18.5 cm;

- zipper at least 17 cm long;

- measuring tape;

- safety pins;

- sewing machine.

The finished pencil case, as in the photo, according to this instruction should turn out to be 9 x 17 cm in size. Please read all instructions carefully before you start cutting. Even a children's pencil case with their own hands cannot be sewn without careful measurements.

We make a children's pencil case for the school with our own hands: a step-by-step description

So, we begin to sew our own school pencil case for pens, pencils and other office supplies.

1. First we create the outer part - this is the most creative moment. Lay out the colored pieces of fabric and canvas next to each other - this is how your pencil case will look from the outside (see photo). Then sew along all the pieces with an open seam.

2. Place a piece of fabric next to it, intended for lining. The stitched fabric on the "outer" side should be exactly the same size as the lining. Line them up and pin them together, then sew along one side.

3. Turn the sewn fabric inside out and attach the zipper so that the clasp is to the right and the zipper itself is completely hidden by the fabric (see photo). The stripes on the fabric should be perpendicular to the zipper. Fasten with pins, and then sew on a typewriter through all three resulting layers (fabric, lining, zipper - on its “right” side, when viewed from the side of the lock).

4. "Separate" the fabric into the lining and the outer part. Bend each of them so that the free edge touches the other, unsewn edge of the zipper - respectively, on both sides. Fasten with pins, and then sew on a typewriter (all three layers again). You should get an open cylinder of fabric with a zipper.

5. Open the zipper and turn your pencil case inside out. Lay it so that there is the same amount of fabric to the right and left of the zipper, pin the open ends of this “cylinder” with pins. Overlock or zigzag on a typewriter, be sure to flash the zipper tape.

Cut off the excess part of the zipper, if there is one (the end without a lock; it is on this side, if you did everything correctly, that an extra piece of tape should remain - in the event that, of course, if it was originally longer than 17 cm).

Since the pencil case is made of fabric without any frame, it is flat and takes up exactly as much space as the things lying in it take up. But it can also be quite roomy. The perfect item for a school backpack!

Video: how to make a pencil case with your own hands

It is difficult to do without a pencil case, if you want the satchel to be in order, the handles lay neatly. It is pleasant for a primary school student to hold in his hands a thing that reminds him of his mother at school. The stores have a large selection of accessories, but they cost decently and do not always differ in quality. Try your hand at making a pencil case.

How to sew a pencil case with your own hands

Making a fun, beautiful school pencil case is easy, even if you don't own a sewing machine. There are a huge number of interesting ideas that not only mothers, but also girls can implement. For many crafts, you don’t even need a pattern - they have a simple manufacturing technology. You can make a pencil case using:

  • cutting materials;
  • felt;
  • old jeans;
  • tubes from paper towels;
  • patchwork;
  • Crochet.

High school students who can sew on a sewing machine can tailor an unusual cosmetic bag based on the scheme. The craft will be fastened with a lock, fixed with a contact tape or tied with a bow. To decorate the accessory use:

  • elegant braid;
  • embroidery;
  • applications;
  • buttons;
  • lace;
  • beads;
  • decorative flowers, butterflies.

How to sew a pencil case for school with your own hands on a sewing machine? You can, using patterns, make crafts in the form of some animal, for example, a fish or a cat, but this will require certain skills. This is within the power of mothers or high school students, and it is better to watch the video master class in advance. A very simple and unusual case can be sewn using a fabric with a funny children's pattern.

You need to start manufacturing with the selection of material. You will need 2 pieces of fabric of different colors measuring 35x35 cm. To make:

  • fold the blanks inside out;
  • Sew all sides, leaving 4 cm unsewn;
  • turn out;
  • sew the remaining space by hand;
  • iron;
  • put the workpiece smart side down;
  • fold the edge from the bottom by 15 cm;
  • pin with pins;
  • draw vertical lines with chalk on the bent part after 2.5 cm;
  • sew along the markup and edges;
  • sew on one side a double-folded tape 24 cm long;
  • roll up, tie a bow.

Do-it-yourself felt pencil case

Very original pencil cases can be made of felt. To work, you need a ruler, a clerical knife, a bar of soap. How to make a pencil case for school with your own hands without a pattern? For example, try doing something like this:

For the manufacture of:

  • take a piece of felt;
  • measure the height of the workpiece 30 cm;
  • the length will depend on the number of pencils you want to put, plus 5 cm from each edge;
  • cut out the rectangle.

Pencils will be inserted into the weave of the strips. To execute cells:

  1. draw horizontal lines with soap from above after 5 cm;
  2. draw 2 strips, stepping back from the sides by 5 cm;
  3. cut with a clerical knife horizontal lines, between two vertical ones;
  4. mark the height of the middle on one side;
  5. take an elegant braid or ribbon;
  6. fold in half and sew along the mark;
  7. insert pencils;
  8. twist into a roll;
  9. tie a bow.

Girls who own a needle can sew a pencil case for school out of felt with their own hands. Using the same technology, you can prepare a case for glasses as a gift to your grandmother. Example:

For this you need:

  • take 2 pieces of material of a different color;
  • cut one 30x6 cm in size (you can take any width);
  • the second - 20x6 cm;
  • put on top of each other;
  • sew over the edge with threads;
  • cut a large part along the radius;
  • sheathe the remaining edges with the same seam;
  • decorate with appliqué, smart button or beads.

Do-it-yourself jeans pencil case

Old jeans are in any wardrobe of a thrifty hostess. How to sew a pencil case for the school with your own hands from the remnants of this material? You can do something like this:

Prepare the fabric - a square with a side of 26 cm, a zipper 25 cm long. For manufacturing you need:

  • bend the edge of the material on the front side by 1 cm;
  • sew one side of the zipper;
  • repeat the operation for the opposite edge of the fabric;
  • turn the workpiece to the wrong side.

Following actions:

  1. fold so that the lock is located in the middle of the product, fasten with pins;
  2. sew side seams;
  3. put the product vertically so that a platform appears below;
  4. place the side seam in the middle - corners are formed on both sides;
  5. they need to be swept and stitched to form a volume;
  6. turn out.

to school with lightning

Sew to school an original pencil case that fastens with a zipper - and more than one:

For manufacturing, you will need 12 multi-colored locks, but the more you take, the larger the internal volume will be. To make this craft:

  • sew together all the zippers in sequence;
  • fold the resulting cylinder in half, measure its width - this will be the diameter of the bottom;
  • cut out two circles with this size;
  • cut with an allowance of 15 mm;
  • turn the workpiece inside out;
  • sew first one bottom, and then the other.

Try making a lined pencil case for school. If you choose elegant material, beautiful decor - you can sew a cosmetic bag using this technology.

Today, in fact, as it was before, it was not at all difficult to make a pencil case pattern with your own hands. Moreover, after spending just a few minutes of your time, you can make a pencil case for the girl that resembles the shape of a bow. In this case, you do not need to sew anything at all.

First you need to prepare a rectangular fabric and fold it in half. The sides of the edges need to be trimmed evenly. The top should be cut off. In this case, you need to try, because it is this side that should be very neat.

Next, you need not to sew the pencil case with your own hands, but to collect it, so to speak - it will be more correct. The sides need to be glued together using hot glue or superglue. The first option here will be the most appropriate.

The fabric strip should be placed right in the center of your pencil case. At the same time, leave enough fabric stock on all sides so that as a result you can tie a bow.

The strip should be glued to the bottom of the product. After that, put pens, rulers, pencils, etc. inside the pencil case. Next, turn the pencil case over and tie a knot. Then tie a bow. It may be large, it may not be very large. Do it to your taste. That's all, now you know how to make a fabric pencil case with your own hands.

How to make a pencil case with your own hands using a plastic bottle

We also suggest considering the option of a pencil case for a school-age child, using the most ordinary plastic bottle.

Of course, the option of a fabric pencil case is very interesting. But he, by and large, is suitable exclusively for girls. But you can also make such items, and with your own hands, and for boys, or universal options!

Oh, what beautiful ways you can think of! In this case, no one tells anyone, there are only recommendations, and if it comes to your mind to supplement the product with something else, you can experiment. Surely, you can make a very original version of the pencil case, and many children will envy your student! You can't buy these products anywhere!

You need to prepare for the manufacture of a pencil case:

  • Plastic bottles, in the amount of two pieces. They should not be thin, it is best that the plastic is dense.
  • Take one wide zipper of a beautiful color. It can be made of plastic or metal, whichever you prefer.
  • Superglue, well, hot glue is the best option.
  • Scissors.

To make a pencil case from a plastic bottle with your own hands, you will need its lower part, moreover, from both bottles. The principle is this, both parts should be connected to each other using one zipper.

On each bottle, to begin with, it should be cut off at the top. First, decide how long your pencil case will be. This affects how long you need to cut the pieces.

For example, to store pens, felt-tip pens, pencils, you will need to make one long part and one short one. The first will serve to insert an accessory into it. The second - as a cover.

Then take the lightning. It should be checked that the correct length of the zipper is selected. This is easy to do by simply wrapping your bottle in bulk with a zipper. In the event that the prepared zipper is long, it must be shortened by cutting it off on the opposite side of the one in which it ends.

Approximately the total length of the zipper should be one and a half centimeters longer than the circumference of your bottle.

When you start gluing the zipper, the dog should be outside, the ends of its zipper are glued directly to the plastic parts from the inside. Each of the halves should be glued in turn, for this the zipper must be completely unfastened.

In the process of gluing, make sure that the dog moves freely along the zipper. This means that you need to leave at least a little space for it. Be careful. Do not stain your pencil case with glue during its manufacture!