Hello needlewomen. Today in the master class I will tell you how to crochet a rose. Can't connect. For you, a step-by-step master class with a description and photos, for beginners from Galina Shpak.

How to crochet a rose, a master class for beginners

The pink rose is crocheted, with one piece, with petals. Twisted in a rose.

1. We need pink yarn, a hook, a needle.

1. How to crochet a rose, a master class for beginners

2 .Knit a chain of 48 ch

2. How to crochet a rose, a master class for beginners

3. Knit 1st row: 3 ch for lifting, in the fourth loop from the hook we knit st.s.n, 2 ch, st.s.n in the same base, 2 ch, skip 2 ch on the chain and in the third we knit st.s.n, 2 ch, st with nak, 2 ch and repeat until the end of the row. Finish after 2 x st.s.n., st.s.n.

3. How to crochet a rose, a master class for beginners

4. We knit the 2nd row: 3 ch lifts, 2 st.s.n under the arch of 2 x ch. previous rows, 2 ch, 2 tbsp. with nak, 2 ch again 2 tbsp. with nak, ch 2, 2 tbsp. with a crochet under the 2nd arch, etc. We finish a series of st.s.n after 2 x pairs of st. with a crochet.

4. How to crochet a rose, a master class for beginners

5. We knit the 3rd row: cooking from 2 x VP previous. row we knit 9 st.s.n 2 ch, connect n for 2 ch between 2 pairs of st.s. with a crochet, etc. to the end of the row. We are finishing a series of connections.

5. How to crochet a rose, a master class for beginners

6. Thread a thread from the same yarn into the needle. And collect the line along the initial row.

6. How to crochet a rose, a master class for beginners

7. And now, tightening a little, we begin to turn into a bud.

7. How to crochet a rose, a master class for beginners

8 Fold and sew at the base.

8. How to crochet a rose, a master class for beginners

9. We grab the edge of the last petal.

9. How to crochet a rose, a master class for beginners

10. We pierce the needle through the center and fix it through the center.

10. How to crochet a rose, a master class for beginners

11. On the reverse side, we tie an elastic band for hair with the ends of the threads.

11. How to crochet a rose, a master class for beginners

12.Here crochet rosette- the hair band is ready.

12. How to crochet a rose, a master class for beginners

You can also link such options, it all depends on your creative fantasies.

How to crochet a rose, a master class for beginners

Workshops with step-by-step photos of hair ties

Also follow youprogress of new articles. In principle, that's all, wait for new articles, video tutorials, . Until we meet again, all success in your endeavors.

Sincerely, Galina Shpak

Knitted flowers can act as a decoration of clothes, for example, as a brooch, or be part of a product. Don't know how to crochet a rose? It is easy even for beginner craftswomen. With our step-by-step instructions and patterns, you will learn how to knit flowers using different techniques, different sizes and types. All you need is yarn, a crochet hook and a little time and patience.

We have prepared a description of 3 different ways of knitting flowers of varying complexity. Each of these descriptions can be regarded as a master class for beginner knitters who know how to knit air loops, stitches with and without crochets, and connecting stitches.

Simple crochet rose

This is an easy way to knit a rose especially for beginners. The flower is made with one canvas, followed by stitching. First you need to knit something similar to an openwork ribbon, and then collect it in the shape of a flower.

• First you need to dial 33 air loops (ch);
• In the first row we knit a double crochet from the 5th loop from the hook. *Then insert the hook through one loop from the first column and knit st. with a crochet (s / n), 1 vp, st. s / n *. Repeat between the stars until the end of the row;
• 4 vp, * 1 tbsp. s / n, art. s / n, 1 vp, 1 tbsp. s / n from the same loop. 1 st.s / n, 1 vp, 1 tbsp. s / n from the same loop *. We continue to the end of the row from * to *;
• 2 vp, st. without crochet (st b / n), * 8 st. s / n on 6 loops of the previous row, 2 st b / n, inserting a hook under the jumper *. We repeat from * to *.

Braid knitting pattern

Designations on the diagram:

• o - air item;
• T - Art. with a crochet;
• + - Art. single crochet

This completes the crochet rose. We got something similar to the braid, which now has to be collected into a rose. To do this, take a needle and thread, twist the braid in a spiral and fix it with a needle. Our flower is ready. Now it can be sewn onto a hat or, by attaching a pin to it, used as a brooch.

Tip for beginners: Crochet roses are best done with smooth and plain dyed yarn. Mohair or weed will give extra volume, and the rose will not look so impressive. And sectional dyeing yarn will make the flower too colorful.

Another way to crochet a rose

To make such a rose, you first need to separately connect the petals, and then collect them all together in random order. The number of petals depends on the size of the rose, but on average it is 15-20 pieces. The petals are knitted in 2 crochet stitches.

• We carry out 4 air loops. Crochet 3 tbsp. with 2 crochets from the first loop;
• We make a rise from 3 air. loops (then we start each row with this), one column, and then we knit 2 tbsp from each loop;
• 3 tbsp., 2 times 2 tbsp. from 1 loop, again 3 tbsp.;
• 4 tbsp., 4 times 2 tbsp. from 1 base, 4 tbsp.;
• 4 tbsp., 2 tbsp. from 1 loop, 6 tbsp., 2 tbsp. from 1 loop, 4 tbsp.;
• We knit with columns from each loop. We repeat this row again;
• We skip 1 loop, knit in columns to the end of the row, the last 2 tbsp. we knit with one top;
• 2 times we knit 2 columns with one top, 3 tbsp., One tbsp with one crochet, 2 tbsp b / n, 1 tbsp. with one crochet, 3 columns, 2 times 2 tbsp. with one top.

Rose petals can be the same color or different. After they are all connected, gather them into a flower and fasten them together. Start collecting from the center, twisting the inner petals into a bud shape. Straighten the outer petals.

If you don’t have anyone to take a flower knitting master class for beginners, our detailed instructions and patterns will help you cope with this task. Just be careful and act according to the description.

Circular crochet rose

In this method, the rose is knitted in a circle. This means that nothing needs to be stitched. At the end of knitting, you will get a finished flower.

Knitting begins with the fact that we collect 5 vp, we close them in a circle. Next, we proceed according to the scheme:

• In the first row we knit 7 tbsp. B / n, connect them, make 2 air loops;
• In the second row, first we knit 1 tbsp. B / n, then from each loop - 2 st.b / n to the end of the row, we connect the columns;
• 3rd row. 4 ch, 1 st b / n in the second loop of the previous row, 3 ch, 1 st b / n in the fourth loop. We continue to the end of the row, we knit the columns, introducing the hook into the even loops of the 2nd row. We finish the 3rd ch, we connect them with the ch from which we started;
• 4th row. We continue to crochet roses. On three vp of the previous tier we knit: st b / n, st s / n, st. With 2 crochets, st s / n, st. B / n. Repeat until the end of the row. So we have the first petals of the future rose;
• 5th row. On the first 3 loops we knit connecting posts. So we “get” to the top of the petal and start the fifth row from here: ch 3, st b / n on a column with 2 crochets, repeat to the end, connect;
• 6 row. St b / n, st s / n, 3 st with 2 crochets, st s / n, st b / n. In this sequence, we knit the petal further. It turned out the second row of petals;
• 7 row. Again we get the connecting posts to the top of the petal of the previous tier. On the middle column with two crochets we make st b / n, 5 ch, and so on;
• 8 row. Inserting the hook into the arch from the air loops, we knit: st b / n, st s / n, 5 st with 2 crochets, st s / n, st b / n. We continue in the same way to the end of the row. So we got the third row of rose petals.

By this principle, you can connect as many tiers of petals as you need.

Rose is ready.

If you are looking for information on how to crochet a rose with a step-by-step description, use our instructions or find a video on the topic.

Crochet roses are best knitted from yarn of medium thickness. If you take too thin, the flowers will not hold their shape well. Too thick yarn will make roses shapeless.

The composition of the yarn also matters. Viscose or silk is quite heavy. Crocheted rosette may turn out to be too soft and shapeless. It is best to knit flowers from cotton, linen, a mixture of wool and acrylic.

Where to use crochet roses? As a rule, they are used to decorate hats, sweaters, bags, make spectacular brooches. Sofa cushions, completely strewn with knitted flowers, look very original.

Hello, inhabitants of the Country of Mothers!
Today I want to show you beautiful voluminous crochet roses. And maybe someone wants to knit such roses, and I'll tell you how to do it. I want to apologize right away for the quality of some photos (I took them late at night, putting the children to bed)
I saw these roses and just fell in love. Schemes from some Chinese site.
So, you will need:
-yarn, I also have PELICAN (Vita Cotton). Composition: 100% double mercerized cotton. The length of the thread is 330 m. The weight of the skein is 50 gr. and COCO (Vita Cotton). Composition: 100% mercerized cotton. The length of the thread is 240 m. The weight of the skein is 50 gr.
-hook, I have number 1.7
-wire- thinner so that it bends well, and thick for the stem, it should not bend under the weight of the rose.
- florenta Green colour
- glue, I used Moment, universal gel
- synthetic winterizer, a small amount of
- beads or half beads, for dew drops
- a vessel where your rose will live, I have a small glass vase and decorative pebbles.

Girls, at the request of the copyright holder, I deleted the schemes. I leave only my photos of the petals. If desired, the schemes can be found in the public domain on the network. Many have copied this post into liveinternet diaries.

We knit three small petals. We make the initial circle of air loops as small as possible so that the hole is almost invisible. We hide the initial thread, at the end we leave the thread more authentic, so that later there is something to sew the rose.

We knit the following petals in a larger size in the amount of also three pieces, according to the same principle.

Then a slightly larger 4 petals.

And the largest petals - 5 pieces.

Then we knit a bud, we will sew petals to it. Here, the initial ring of air loops should be larger so that a hole remains, where we will then insert the wire stem. The bud needs to be tightly stuffed with synthetic winterizer.

Now we will sew the petals on the bud. Remember that the hole for the stem should be at the bottom. We will sew in layers, according to the number of petals of different sizes - that is, there will be four layers. You need to sew them like this. First we sew half of the petal, then the half of the second petal, then we sew the second half of the first petal onto the second petal. And so in a circle all three petals. It should turn out like this.

The remaining petals are sewn according to the same principle. Just try on first, see that the petals fit beautifully. In the end it should look like this.

Now stems and leaves. We cut the thin wire into pieces: two smaller ones and one larger one. We knit leaves of a suitable shape. There are many schemes of different leaves on the Internet, choose what you like, I will not focus here. Leaves need two more and four smaller. Those two pieces of wire that are smaller are wrapped with florentine. Then we begin to wrap the one that is larger and in the process we wind the small stems crosswise several times to the large one, as in the photo.

Then glue the leaves to the stems. We take a thick wire for the main stem and also wrap it with florentine, winding a branch with leaves in the process, according to the same principle - crosswise. The sepals were knitted without a pattern, a circle with single crochets, up to 30 loops, then each leaf individually - at the base of 6 loops, in every third row we decrease 1 loop. Be sure to leave a hole in the middle for the stem. Then we put the sepals on the stem, smear the tip of the stem thickly with glue and stick it into the rosette, trying to push it away. Move the sepal to the rose and glue it.

Crocheted flowers are one of the favorite themes of needlewomen, because with the help of such a decorative element you can transform a lot of things, from clothes to interior items. Knitted rose is the queen of flowers not only in nature, but also in crochet needlework. There are just an incredible amount of crochet roses, perhaps this majestic flower won the heart of more than one noble craftswoman!

A knitted rose is a flower that will always be fragrant and will never wither, which is why it is good as a decoration for hats, scarves, blouses and even bags. Moreover, they use crocheted roses and independently - as exquisite women's brooches, bright children's hair clips, to say nothing - they create luxurious necklaces and bracelets from roses.

Knitting roses is available even to beginners who have just become familiar with the crochet. In order to start making a decorative rose, you can use any yarn at your disposal (iris, cotton, acrylic, linen, wool, bamboo), as well as a hook that is suitable in size to the thickness of the thread. Depending on the choice of yarn colors, roses can be made bright, or, conversely, pastel, or even experiment with a combination of colors.

As for how to crochet roses, there are only two of them:

1. knitting a long lace strip, which is later twisted into a rose;
2. knitting individual elements of a rose (middle, petals, cups, buds), gathering into a flower with a needle.

The choice of knitting always remains with the craftswoman. Try to crochet your first flower, and we guarantee you will be surprised how elegant and very realistic roses you can crochet with your own hands.

We have prepared two step-by-step lessons on crocheting roses in both techniques (with a whole fabric and by elements).

A simple master class on knitting a rose with one openwork strip

Despite the fact that knitting a whole flower is considered easier compared to making roses by elements, the end result pleases needlewomen no less - the rose turns out so lush, you can’t take your eyes off!

To make such a rose, you need:

• viscose yarn of two contrasting colors of medium thickness (we have deep purple and pale lilac);
• hook number 2;
• thread with a needle, scissors.

Knitting pattern:

Explanation of abbreviations found in the text:

• VP - air loop;
• runway - runway lift;
• RLS or Art. b / n - single crochet;
• SSN or Art. s / n - double crochet;
• C2H - Art. with 2 crochets;
• PS - half-column;
• PR - previous row;
• SS - connection column.

Work description:

We collect the base chain for 48 VP.

Row number 1: we count 5 VP from the hook, insert the hook into the sixth, knitting 1 CCH.

We knit another VP.

On the base chain, we skip 2 VPs, in the third we knit: 1 CCH + 2 VP + 1 CCH.


We continue to knit with rapports to the end of the row: 1 VP + skipping two VPs of the warp-chain + into the third VP: 1 CCH + 2 VP + 1 CCH.

Row number 2: raise 3 runways as the end of the first row.

We turn the knitting over, we knit 1 CCH into an arch of 2 VP PR.

Then we knit 2 VP + 2 CCH in the same arch.

We continue to knit a series of repeating combinations: 1 VP, in the next. we knit an arch of 2 VP PR 2 CCH + 2 VP + 2 CCH. Repeat until the end of the row.

On the last two loops of the second row, it is necessary to attach a lilac thread.

Row number 3: raise 3 runways.


Flip knitting - we knit 3 CCHs in an arch of 2 VP PR.


Then we knit 1 SS into the arch from the 1st VP PR.

Following. we knit the arch already 8 CCH + 1 CC into the arch from the 1st VP PR. Repeat the rapport 3 more times, in total you should get 4 fans of 8 tbsp. s / n.


In the next arch we knit 10 CCH + 1 CC into the arch from the 1st VP PR. We repeat 5 such rapports, only 6 fans per 10 s / n columns. SS. We cut the thread. The openwork strip for the rose is ready.

We turn it into a spiral.

From the inside, we sew all the layers of the flower with a needle to securely fix its shape.

The rose is ready!

Keep in mind that the side of the strip (front or back) matters in the direction of spiral folding - depending on the selected side, rose petals can be either concave inside the flower, or, conversely, convex, more open.

The final stage is decorating the rose. You can tie a green leaf to it, you can decorate it with glass beads or rhinestones, it all depends on your imagination. With a ready-made rose of this type, you can decorate any items from the wardrobe (especially for children!), As well as decorate interior items in an original way (vases, paintings, photo frames, etc.).

Knitting a three-dimensional rose from individual elements: a step-by-step lesson for advanced craftswomen

Crochet voluminous roses are truly magnificent - they can really be easily confused with real flowers! True, it takes a lot of time to make them, but all efforts will pay off with interest - such hand-made is highly valued!

Let's look in detail:

A voluminous rose is knitted from separate elements: the middle, three inner and outer petals, a calyx and three to six green leaves. So, let's start knitting the components of the flower.

The middle of a rose

Schematic drawing

Knitting:

We collect a chain of 10 VPs, close the ring with the help of the SS.
Row number 1: 2 VP + 15 dc in the middle of the circle from the base, 1 sl-st.
Row number 2: 2 VP + 2 dc in each loop of the PR, 1 sl-st.
Rows No. 3-4: 2 VP + 1 SSN in each loop of the PR, 1 SS.
Row number 5: 2 VP + 1 dc in each 2nd loop of PR, 1 sl-st.
Row number 6: 1 VP + 1 sc in each loop of the PR, 1 sl-st.
Row number 7: 1 VP + 1 sc in each loop of the PR, 1 sl-st.
Row number 8: 1 VP + 1 RLS, then we knit in rapports: 4 CCHs in one loop + 1 RLS, we finish the SS.

In addition to the middle, we knit a bud, it is necessary so that the center of the rose does not shine through and the filler is not visible through it.

We collect a chain of 21 VP

Row number 1: we skip two VP chains, from the 3rd we knit 19 sc.
Row No. 2: 2 VP + 1 CCH + 2 C2H + 1 CCH + 1 CC + 1 CCH + 3 C2H + 1 CCH + 1 CC + 1 CCH + 6 C2H + 1 CCH + 1 CC. Inner rose petal (3 pcs. )

Scheme:

We collect a chain of 9 VP. We knit in turning rows.
Row number 1: we count two VP chains, starting from the 3rd we knit 7 sc to the end of the row.
Row number 2: in the 1st loop of the row we knit 2 VP + 1 CCH, in each next loop - 2 CCH to the end of the row.
Row number 3: 2 VP, then - 7 rapports: 2 CCH in one loop + 1 CCH in the next loop, last loop - 2 CCH.
Row 4: Ch 2, 1 dc in each st to end of row.
Row number 5: 2 VP + 3 CCH, 4 rapports: skipping one loop + knitting 4 CCH.
Row number 6: 2 VP + 3 CCH, 4 rapports: skipping one loop + knitting 3 CCH.
Row number 7: 2 VP + 1 CCH in each loop of the PR.
Row number 8: 1 VP, 6 rapports: 2 CCH in one loop, then - 2 RLS, 6 rapports: 2 CCH in one loop. SS. We cut the thread.

Outer petal (3 pcs.)

Scheme:

The initial chain and the first 7 rows are knitted in the same way as knitting the inner petal.
Row number 8: turn the work, raise 1 VP, 2 CCH in one loop, knit rapport three times (2 C2H in one loop), then knit 2 CCH in one loop, 2 PS with a crochet in one loop, 2 RLS, 2 PS with a crochet in one loop, 2 CCH in one loop, then again we knit a rapport three times (2 C2H in one loop), we finish with 2 CCH in one loop and SS.

Cup (green yarn)

Scheme:

We knit a chain of 7 VPs, close in a circle with the help of the SS, knit in a circle.
Row number 1: 1 VP + 9 PS with a crochet in the middle of the circle. SS.
Row number 2: 1 VP, 4 rapports (2 PS s / n in one loop + 1 PS s / n), 2 PS s / n in one loop. SS.
Row number 3: 5 rapports (8 VP, starting from the 3rd loop from the hook we knit: 3 RLS + 3 PS s / n + 3 SS).

Leaflet (6 pieces).

Scheme:


We collect a chain of 14 VP.
Row number 1: in the 3rd loop - 1 RLS, then we knit 2 PS s / n, 6 CCH, 1 PS s / n, 2 RLS.
Row number 2: turn knitting, knit 1 VP + 1 sc + 2 dc in 1-well loop + 2 dc in one loop + 1 dc2n + 2 dc in 1-well loop + 2 dc + 2 dc in 1-well loop + 1 sc + 2 sl-st + 1 sc in the penultimate loop.
Row number 3: knit in a circle: 2 sl-st + 1 sc + 2 dc in 1-well loop + 2 dc + 2 dc in 1-well loop + 1 dc2n + 2 dc in 1-well loop + 2 dc in 1-well loop + 1 sc + 1 sl-st.
Row number 4: turn the work, knit 1 VP + 1 RLS + 2 PS s / n in 1-well loop + 2 CCH in 1-well loop + 2 CCH in 1-well loop + 2 CCH + 2 CCH in 1-well loop + 1 PS s / n + 2 PS s / n in 1-well loop + 6 RLS + 1 VP + 1 PS s / n.
We knit row No. 5 in a circular pattern: 1 VP + 6 RLS + 2 PS s / n in 1-well loop + 2 CCH + 2 CCH in 1-well loop + 2 CCH in 1-well loop + 2 PS s / n in 1- well, a loop + 1 sc + 2 ss.

Tie the leaves in a circle with a “crustacean step”, stretch a thin wire along the edge so that the sheet keeps its shape. We collect three leaves in a branch.

Assembly

Once all the elements of the rose are ready, we proceed to assemble the flower. As a trunk, you can use a cable or thick wire covered with masking tape. We fill the connected middle of the rose with filler, attach the inner petals to it with an overlap, followed by the outer ones. We put the middle on the trunk, attach a bud inside it, then the middle, sew a cup under it. We wrap the trunk with a green thread, tying the leaves at the desired height and distance in parallel. The rose is ready! From these roses you can make a rich bouquet and decorate your favorite vase with them. They are also good as an original gift for mom or a close friend.

Video tutorials on crochet roses

Roses are very popular in crochet needlework, therefore, for greater clarity, we suggest that you familiarize yourself with detailed video tutorials on knitting them. Get inspired and improvise!