How to smooth wrinkled trousers without arrows. From the piggy bank of folk wisdom. How to iron men's trousers with arrows

22.05.2019

Classic trousers are an essential element of a modern wardrobe. Despite the fact that most people prefer loose casual and democratic style, there are etiquette, dress code and traditions in our life, and in this case, strict trousers are indispensable.

Ironing pleated trousers is not difficult, but you will need patience and certain skills.

Since the classic cut assumes the presence of perfectly even arrows, each of us faces the difficult task of learning how to iron them. In this article, we have collected useful tips and tricks for you, thanks to which you can learn how to iron pleated trousers correctly.

Training

Ironing trousers is a step-by-step process, and before you start it, you need to prepare. In order to properly iron trousers with arrows, you will need:

Smooth surface. It can be an ironing board, table or any other smooth surface covered with a thick blanket;
thin cotton cloth or gauze;
spray bottle with water.

When ironing, first determine the type of fabric and select the appropriate temperature setting on the iron. As a rule, manufacturers indicate accurate information on the label of trousers, but if there is none, remember: synthetic trousers are ironed at low temperatures, and woolen, linen or cotton - at medium and high thermal conditions.

It is recommended to iron trousers only when they are clean. If there are stains, sweat marks, streaks or other dirt on the fabric, when heated, the dirt particles will penetrate deep into the fibers of the material, and it will be almost impossible to clean the trousers at home. Do not be lazy to wash or clean the thing before ironing.

Turn pants inside out before ironing. This way you can avoid the shiny sheen that appears on the fabric when touching a very hot iron.

main stage

Now that the preparation is over, we proceed to the main stage. Consider step by step how to iron trousers with arrows.

Top part

We put clean and inside-out pants on an ironing board (or a flat surface covered with a thick blanket) and carefully straighten them with our hands.

You need to start ironing trousers with arrows from top to bottom. First, we iron the pockets and the lining, if it is present, then iron the belt from all sides, then the codpiece (width) and the back connecting seam.

The special sleeve of the ironing board will help you gently iron the complex upper part of the trousers.

The upper part of the trousers is a difficult area with many purl seams. If you just walk over it with an iron, the imprint of the internal seams will appear on the front side and make the trousers look unaesthetic. To avoid this, it is better to use a special sleeve for ironing.

If there is no such device included with the ironing board, put a flat but dense pad into the inside of the trousers, cover the trousers with a damp cloth (gauze) and iron from the front and back sides.

Pants

After the top of the trousers, we go directly to the legs. We do not touch the arrows yet. Carefully iron the legs along the entire length, using gauze or thin cotton fabric as a spacer between the iron and trousers. It must be periodically sprayed with a spray and additionally use the steam function (if it is provided in your iron model).

After ironing one side of the trousers, turn the trousers over and iron the opposite side in the same way. Now we carefully fold the upper leg so that we have the inside of the trousers in front of us. We iron it with an iron, not forgetting to steam it and sprinkle it with water. Turn the trousers over again to the opposite side, fold the upper leg and iron the inside of the second leg.

Before proceeding with the creation of arrows, it is necessary to carefully iron the trousers along the entire length.

When the process of ironing the wrong side is over, we turn the trousers on the front (front) side and also, using wet gauze, lightly iron the legs along the entire length, without affecting the line of the arrows.

The main stage is completed. Now you can move on to the arrows.

Arrows

Carefully straighten the trousers along the entire length, turn out the pockets and fold both legs so that the side seams are symmetrically superimposed on each other. The line of the front side seam must match the line of the inner. To prevent the seams from slipping when ironing, they can be fixed with sewing pins or thin needles. First we connect the seams at the bottom of the legs, then at the top of the trousers. We have two fold lines - these are the future arrows on the trousers.

Pants with a classic cut suggest the presence of two straight darts in front and behind. They become the starting point for creating arrows. The darts smoothly pass into the edges of the legs, which will be a guide for ironing. Before ironing trousers with creases, make sure that the side seams of both legs match and that the creases are a continuation of the darts.

The experience of creating smooth and clear arrows does not come immediately. At first, a lot of time is spent, but with each ironing, its amount decreases and all stages of work are completed almost instantly.

We cover the legs of the trousers with a damp cloth and begin to gently iron the arrows. It is best to start ironing the arrows from the knee area - this way they will turn out to be more even and neat. The edge of the trousers in places where there will be arrows can be slightly pulled with your free hand.

In order not to knock down the intended arrow when ironing, do not slide the iron immediately along the entire length of the leg from beginning to end. Place the iron on the fabric sequentially, section by section, hold it for a few seconds and only then move it further, as if stepping the iron over the trousers. This method is especially convenient if the trousers are made of slippery material. After ironing one leg, evaluate the result - the arrow should be even along the entire length. Finish the process by ironing the arrows on the second side.

There are models of trousers with the so-called darts-tucks. It is also possible to iron the arrows with this cut: first smooth out the front right tuck, and then move on to the left (closer to the fly).

When you're done ironing, hang your pants on a full-length hanger and let them cool down a bit. Only then can they be worn.

As described above, both men's and women's or children's trousers are ironed. If the step-by-step instructions did not clarify, you can watch the following video:

To iron perfectly sharp arrows and keep their shape for a long time, follow these simple recommendations.

The arrows will turn out to be hard and retain their shape for a long time if, before ironing, rub the trousers from the wrong side in the places of future arrows with a sharp piece of laundry soap without additives

Add a few drops of vinegar or ammonia to the water to wet the fabric - this solution will help make the arrows thin and sharp and fix them securely

Do not wear trousers immediately after ironing. For some time they are still damp and wrinkle quickly. Leave them on the ironing board or hang them on a special hanger

Iron trousers through the fabric, even if the iron is equipped with a steamer - this will help you not to spoil the material and preserve its appearance for a long time

In the absence of experience, it is not always possible to make straight arrows the first time. Do not despair - on the wrong side, you can smooth out the bumps and repeat all the steps of ironing

In order not to wash and iron trousers with arrows too often, after each use, clean them from dust with a special roller, remove stains with a brush and hang them up carefully

It is recommended to pre-steam the trousers before ironing. This will help get rid of large creases and prepare the fabric for creating perfect arrows.

We hope that our advice will be useful to you. And remember: everything comes with experience; sooner or later you will learn how to iron trousers with arrows.

She graduated from the author's physical and mathematical lyceum and art school. Received a higher economic education in the direction of "innovation management". Freelancer. Married, actively travels. He is interested in Buddhist philosophy, enjoys transsurfing and loves Mediterranean cuisine.

Found an error? Select the text with the mouse and click:

If the first signs of gestation in the form of untidy pellets appear on your favorite things, you can get rid of them with the help of a special machine - a shaver. It quickly and effectively shaves off clumps of fabric fibers and returns things to a decent look.

Before removing various stains from clothes, you need to find out how safe the chosen solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of \u200b\u200bthe thing from the inside out for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

In the dishwasher, not only plates and cups are washed well. It can be loaded with plastic toys, glass shades of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

Fresh lemon is not only good for tea: clean the dirt from the surface of an acrylic bath by rubbing with a half of a cut citrus, or quickly clean the microwave by placing a container of water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt will simply be wiped off with a sponge.

Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m 2 of its area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.

The easiest way to remove scale and soot from the sole of the iron is with table salt. Pour a thick layer of salt on the paper, heat the iron to the maximum and several times, pressing lightly, run the iron over the salt bedding.

The habit of using the washing machine “economically” can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on internal surfaces and actively multiply.

To combat moths, there are special traps. In the sticky layer with which they are covered, pheromones of females are added to attract males. Sticking to the trap, they drop out of the breeding process, which leads to a decrease in the moth population.

There are styles of trousers that look decent only if stroke them correctly with arrows. Not everyone knows how to do this correctly, so in our article you can find recommendations and secrets that will help you iron trousers with arrows correctly.

So, here is a list of what will be needed in the process of ironing trousers:

iron with steam function;

sprayer with water;

ironing board;

cotton tablecloth soaked in water.

Having prepared all the necessary items, carefully inspect the pants that you are going to iron.: determine in which mode it is best to iron them, since with inept handling you can lose your pants once and for all. Often this information can be found if you find a tag on the belt of your trousers. If there is none, but you feel that the fabric is very delicate to the touch, then you should iron it exclusively at low or medium temperature.

In order to iron the trousers as correctly and beautifully as possible, they must be turned inside out and carefully ironed in the area of pockets, lining and seams at the back. After that turn them back. Now we can start the main process of ironing.

Lay your trousers on the ironing board and line them precisely so that all vertical seams and legs are parallel to each other. Straighten any irregularities with your hands, after which you can proceed to ironing.

There is one secret: so that the contours of the seams, a large number of which are located behind the trousers, do not show through, put a towel folded several times in them, and only then iron the front of the trousers, having previously covered it with a damp tablecloth.

After that, you can proceed to the trousers. Do not try to iron the creases yet, first iron both sides of the trousers, after which the upper leg must be tucked up. The inside of the second leg, which will open to your eyes, needs to be ironed using the “steam” function. Do the same with the second leg.

First trouser ironing session completed successfully! Now we can proceed to a more important and responsible event: ironing the arrows.

To iron your trousers correctly and beautifully, you need to find a thin convex strip in the middle of each leg. We will use it as a contour for our arrows. Before you start ironing the creases, you need to make sure that the seams of the trousers are parallel to each other, otherwise you can unevenly iron the creases, which will have an extremely negative effect on the appearance of the trousers.

The legs should again be covered with a damp tablecloth, and then proceed to ironing. With one hand, pull the edges of the legs where the intended arrows will be. If you want to fix the result and make it more resistant, then you should rub the pants with a remnant from the inside in the place where the arrows will be.

It is advisable to wet the cotton tablecloth with a spray bottle. It is advisable to add a little ordinary table vinegar to the water, as this will help the arrows last longer.

Ironed trousers must be stored only on a hanger, in full length, otherwise they will wrinkle very much, and the result of your efforts will be invisible. In additional materials you will find a very detailed and visual video instruction.

This versatile clothing has taken a leading position in both men's and women's wardrobes. It is worn both in summer and winter. It's pants! But strict costume or original club options need special care. Before you properly iron trousers with arrows, you need to understand all the intricacies of the process. Often even experienced housewives do not know how to put this thing in order, and beginners in horror refuse to iron.

Pants are sewn from fabrics that react differently to external factors. Some can withstand maximum temperature and steaming, while others are about to deteriorate. To avoid excesses, it is better to study the information on the label at the belt in advance.

Before the procedure, the trousers are inspected for stains: any dirt will be absorbed, and it will be difficult to clean it later. Professionals advise to iron the arrows only after washing. Fluff and animal hair are removed from the surface of the trousers with a brush, and small debris is removed from pockets.

Pants are ironed on a special board or table. To protect the top layer of furniture, it is covered with a dense fabric folded in several rows. Otherwise, any bumps and bumps will affect the appearance of the trousers. The soleplate and steamer of the iron must be clean, otherwise traces will remain on the material.

To achieve perfect arrows, you need to prepare an iron - a small piece of gauze, calico or chintz. Such protection will allow you not to twist the legs and iron on the front side.

Without it, things will remain glossy, and small elements will be difficult to smooth out. It is better to give preference to a white iron without prints and decor.

To correctly make arrows on trousers, you need to carefully iron the product. The clothes are turned inside out and carefully laid out on the board. To prevent wrinkles from appearing later, you need to iron the pockets. A thick damp towel is placed between them and the fabric of the trousers, which protects against ugly marks on the surface. The belt and lining are aligned using a similar technology.

Then the procedure takes place on the front side. There are a lot of seams on top, so manipulations start from them. In order not to show lines on the fabric, it is allowed to put a small pillow or a coverlet folded in several layers under them. Do not forget about the protective material, which must be moistened. The legs are placed on the board so that the internal connections overlap one another, and are slowly ironed out.

Once the clothes are lined up, it's time to learn how to iron out the creases on your trousers. The wardrobe element is folded so that the side seams fully correspond to the internal ones. It is important that the strip matches the tuck on the belt. A damp cloth is fixed on top and the process begins. Professionals advise novice housewives to work with each leg separately, and not immediately iron everything.

In order not to bring down the line, carefully place the iron in the designated place, hold for a few seconds and move it lower. Sometimes the arrows on the pants are fixed with pins or clerical clips, but this is not suitable for delicate fabrics. Preliminary "test" objects, applying to inconspicuous parts.

If there are two darts on the clothes, then the procedure is slightly transformed:

align the right tuck;
go to the element near the codpiece;
form arrows.

The material dries out under the influence of temperature, therefore, the fabric is periodically sprayed with a spray bottle and the iron is moistened with water. You can’t put on hot clothes right away, otherwise all the work will go down the drain. Pants are neatly folded on a hanger and allowed to cool for 20-30 minutes.

It is not enough just to quickly iron the creases on the trousers, it is important to save them correctly. Often a person spends a lot of time on restoring beauty, and after the first wear or washing, everything disappears. There are many tricks to save effort:

Vinegar. If the material for ironing is moistened in acidified water, then the arrows will turn out to be hard and will not shine. 1 tablespoon of this substance is added to a liter of liquid.
Soap. From the wrong side, the arrows must be drawn with a soap bar, and then smoothed over with a hot electrical appliance. Household chemicals with fragrances and dyes will leave marks on the fabric, so they prefer a nondescript household option.
Starch. Potato paste also holds arrows well. The material from the inside is gently smeared with a thick mass, left to dry for a few minutes, and then ironed from the face.

Often housewives pay attention to the fact that the knees are stretched on the pants. An ugly defect deprives the clothes of external attractiveness, so it is necessary to return it to its original state. The thing is placed on the board, aligning the “hills” with your hands. A dense damp cloth is applied with tangential movements, after which they give the desired look with an iron.

Trousers made from natural fabrics are difficult to iron. To keep the arrows on these pants, experts recommend sewing up the capricious components with a thread. After washing, the strips will not disperse, and it will be enough just to walk with a hot iron over the surface.

If after ironing the fabric began to shine, do not worry and rewash the clothes. Moisten gauze in a solution of water and vinegar, apply to the defect and steam off. You can treat the affected area with refined gasoline for lighters, sprinkle with salt and dry. After an hour, the remnants of the grains are shaken off, the trousers are ironed.

Fabrics that do not like high temperatures are treated with steam. A steam generator or a conventional electrical appliance placed in a horizontal position will help with this. The technique is kept at a distance of three centimeters from the material, after which hot air is released.

To look your best, you need to know the intricacies of caring for clothes. If a person understands how to properly iron trousers with arrows, it will not be difficult for him to bring his favorite element of the wardrobe back to normal. Pressed pants will be a great addition to the image.

It is difficult to imagine a strict business suit without trousers with arrows. At least one such thing can be found in the wardrobe of most men and women, even if their work is by no means an office one. Classics will never go out of fashion, just as cleanliness will always be the most important criterion for evaluating appearance. Therefore, every housewife must know how to iron trousers with arrows.

Preparing to iron the arrows

It only at first glance seems that ironing the arrows is easy and no special instructions are required here. But in reality, especially if there is no experience and relevant knowledge, ironing trousers often takes a lot of time, nerves, and sometimes even ends in damage to the thing. Such failures occur most often due to improper preparation of clothing.

Pants should be ironed in an exceptionally clean form, so be sure to wash or clean them first;
Select the appropriate program for the fabric type on the device. Most often, the material of the trousers contains synthetic fibers that do not withstand high temperatures;
Before smoothing the creases on the trousers, iron the waistband, codpiece area and pockets. Then walk along the entire length of the legs and lastly take care of the vertical folds;
Any clothes should always be ironed only from the inside, but in order to iron the creases on the trousers, it is necessary to turn them on the front side.
Before ironing men's trousers, or rather the arrows on them, you need to carefully lay out the product on a flat horizontal surface so that the inner side seams exactly overlap each other. In this case, the front side seam with the inside should also ideally match. It will be possible to fold symmetrically and iron the arrows correctly only if the product is tailored with high quality.

Ironing trousers step by step

Having prepared the trousers properly and properly laid them out on the ironing board, you can start ironing the arrows.

Since you need to iron trousers with arrows on the front side, you should protect the fabric from damage as much as possible. Defects such as burn marks and shiny iron marks are extremely difficult to remove, and sometimes even impossible. Therefore, ironing trousers should always begin by covering them with damp gauze (calico or calico fabric is also suitable). It will not be superfluous to use a spray gun;
Fix the fabric in the correct position with pins so that it does not move during ironing;

To fix the legs, you can use ordinary stationery clips

To prevent the purl seams of the upper part of the product from showing up during ironing, put small fabric rollers into the pockets and also cover with a damp cloth;
Lightly pulling the arrows with your free hand, go through them with a heated iron, using the steam mode. First, iron the trousers on the side on both sides, and then the insides in the same way;
To keep the ironed arrows as long as possible, rub them with dry laundry soap from the wrong side.

Is it possible to do without an iron?

How to steam trousers with an iron, you now know. But what if there is no such possibility, for example, the device is broken or the electricity is turned off at the wrong moment? Even in this case, you should not give up your favorite classic style and elegant, even arrows. There are a couple of ways to iron pants without an iron:

Pour boiling water into a metal mug with a wide bottom, wait until it heats up and use instead of an electrical appliance.
In order to iron trousers with arrows, replace the broken iron with hair tongs. Just do not forget to wipe and degrease the device before non-standard use, as there may be residues of the styling product on it.

Video: How to iron things without an iron (Life hack)

In fact, there are many more ironing methods without using an iron, but all of them are unlikely to be suitable for putting trousers in order, and even more so, they are not intended to create perfectly even arrows.

Be sure to follow all the ironing rules described above. If the fabric is damaged, the clothes will most likely have to be thrown away. Well, the arrows are much easier to iron new ones than to correct crooked folds.
Before ironing, be sure to check for cleanliness not only clothes, but also the soleplate of the iron.

To find out how to properly iron men's trousers and what material they are made of, carefully read the label. A label with such information is usually sewn on the side seam on the wrong side of the product. In the absence of a label, to avoid risk, set the device to the minimum temperature setting.

It is advisable to choose a white iron (gauze cut) to eliminate the risk of staining the fabric of the product.

Arrows on men's trousers always start ironing from the back darts.
To avoid horizontal creases, do not hang the product on a hanger immediately after ironing. Wait for the fabric to cool completely.
Correctly iron trousers with arrows through a damp cushioning fabric. And so that they remain in this form for as long as possible, moisten the gauze not with clean water, but with a weak vinegar solution (1 tablespoon of vinegar per 1 liter of water). Also, vinegar can be replaced with 4-5 drops of ammonia.
In the process of ironing, some housewives straighten the arrows with an iron. Remember: you need to do this only with your hands.
If your iron does not have a steam function, spray the iron frequently with a spray bottle.
If you actively move the iron along the intended crease, you can easily knock it down. Put the device on the arrow, hold it for a couple of seconds, then move it to another place.
Before piercing clothes with ironing pins, test the fabric in the least visible place for resistance to this kind of impact.
Each leg should be ironed separately. Having processed half of the thing, be sure to evaluate the result of your work.
If the first time you didn’t manage to make a straight arrow, don’t be discouraged. Turn the garment inside out, iron the fold and start over.
After each wear, carefully hang the bottom of your business suit on a hanger so that the creases lie flat.

Video: How to iron trousers with your own hands

Conclusion

Whether arrows are needed on trousers depends not only on taste preferences, but also on some other factors. For example, sometimes social status dictates how one should dress: a high position in society, leadership positions oblige men and women to look solid. Also, at a banquet, at cultural events, the appearance in jeans will be inappropriate, but neat trousers with full-length vertical pleats are just right for such occasions.

Now knowing how to iron creases on trousers, you are much more likely to create the perfect business look.

If ironing ordinary clothes is not so difficult, then in order for trousers with arrows to look nice and tidy, you should work hard.

Before you plunge headlong into work, make sure your pants are clean. Any stains, stains or dirt after ironing will be absorbed into the product, it will be almost impossible to restore the previous look.

Carefully study the label on the trousers, this article will help in deciphering the badges on the clothes. Each composition of the fabric has its own temperature regime for ironing. Do not ignore the manufacturer's recommendation, and set the rotating circle on the iron at the desired points.

Prepare your iron.

Pants with arrows are always ironed through a piece of fabric (preferably white) or gauze. This will protect the product from shine, streaks or accidental damage.

The surface of the iron must be clean, without carbon deposits. This is, firstly, a guarantee of good sliding, and secondly, it will protect your things from pollution.

Ironing dampened fabric is much easier and easier. Modern irons are usually equipped with a steam mechanism. Fill the water tank and activate the function on the iron. If this is not possible, stock up before ironing with a spray bottle with water.

How to iron men's trousers with arrows

So, you have prepared everything you need to create beautiful, strict arrows on trousers. At the first stage of work, they iron the base of the product, and only then proceed directly to the crucial stage - the creation of arrows.

Ironing trousers: step by step instructions

In order to avoid “imprints” of internal seams on the front side during ironing, put a towel or a piece of fabric in the trousers, and only then start ironing the upper part of the product.

Working on arrows

This stage of work does not tolerate haste, it must be done as scrupulously as possible. Since any mistake in ironing the arrows is quite difficult to fix. So:

Lay the pants on the ironing board with the waist down. Fold the legs of the trousers as symmetrically as possible, a convex strip in the middle of each leg serves as a guide. The arrow is a kind of continuation of the tuck located in the upper part;
To prevent the trousers from slipping during work, you can fix their position with sewing pins (do this very carefully so as not to damage the fabric);

Correct, parallel folding of the legs is the key to creating perfect arrows. Before starting ironing and steaming, once again make sure that the trousers are positioned as they should, otherwise the arrows will move out or twist!

Features of ironing women's trousers with arrows

If classic men's trousers with arrows are the main element of business style, then women's trousers will look appropriate in different situations. Moreover, they can be straight cut or tapered. Accordingly, they need to be ironed in different ways. What you should pay attention to?

Be sure to set the correct temperature. Women's pleated trousers often contain more synthetics than classic men's trousers;
When laying out trousers, do not focus on the tuck, as the styles of women's trousers are a figment of the imagination of fashion designers. The main thing is to lay them out evenly, clearly combining the legs;
Pay special attention to the area of the knees - the fabric in this place is often stretched and, perhaps, it is necessary to iron in this place more carefully;
If you have a narrowed model, try to completely restore the original arrow after washing, do not try to iron it where it is not necessary. Otherwise, the pants will look ridiculous.

In general, the sequence of actions during ironing of women's trousers with arrows is the same as for men's. The main thing is to follow all the instructions clearly and slowly.

3 tips to make creases on trousers last longer

In ironing trousers with arrows, you can use some tricks. In order for the thing to be worn well, and you look like a needle, we advise you to add vinegar to the water for wetting - about 1 tbsp. per liter of water. Do not pour the resulting solution into the iron itself, but use an additional sprayer.
A bar of soap will also help secure the arrows. Swipe a slightly damp remnant of the inside of the arrows and then iron them well from the front side.
Ironed trousers should be allowed time for the fabric to dry from the steam and cool. Only after that, the thing can be neatly hung in the closet or put on.

You can see more tips from professionals in the following video:

How to remove shine on trousers after ironing?

Well-ironed trousers give the image a presentable and sophisticated look. By following the recommendations and constantly practicing, you can quickly bring the process to automatism. A beautiful, even crease on the trousers will help you look stylish and confident!