Monkey made of satin ribbon master class. MK Kanzashi: Monkey pendant Monkey using the kanzashi technique

According to the eastern horoscope, 2016 is the year of the Fire (red) Monkey. A pendant made using the kanzashi technique is a stylish gift for friends.

Master class “Pendant using kanzashi technique “Monkey”

To begin, take a ribbon (or fabric) of brown, beige and red (you can do without it) and cut it into squares 10 × 10 cm.

For the nose, eyes and ears we make 5 × 5 cm squares in beige color - 5 pcs.

Decorative eyes are also needed.

Materials for work.

Stages of work:

1. From beige and red squares 10 x 10 cm we fold a round petal. We put the red square down, under the beige one - we will turn it inside out.

We will need two such parts.

2. The parts need to be stacked next to each other, aligned and cut off about half with a soldering iron.

The mouth is ready.

3. We make the same parts from brown squares, but we will fold them into a “jack” - this is the head.

4. We also make eyes from 5 × 5 cm squares. Their size must be adjusted to the size of the plastic eyes. We glue the finished parts together.

5. Fold the nose in the same way. Then we carefully bring our nose to the candle and lightly heat it from one edge.

When the tape begins to melt, press one nostril with a fingernail or tweezers, then heat the other nostril from the other edge.

Glue the nose on top of the muzzle.

6. We glue the eyes onto the muzzle behind the nose.

7. We insert the muzzle into one of the brown parts and adjust the second brown part. We tried it on, liked it, and glued all the parts together.

8. We make the ears as shown in the photo. Fold the square diagonally, then “accordion” several times. We cut off the excess with a soldering iron and glue it. All that remains is to fasten the loop.

This is such a funny monkey we got.

Happy New Year! Good luck.

To make a beautiful monkey hairpin with your own hands we need:

  • 1 cm wide grosgrain ribbon in brown, gray and yellow colors
  • crocodile clip base
  • plastic eyes
  • heat gun
  • scissors

DIY monkey hairpin for the New Year - master class with photo:

Cut a piece of yellow ribbon the size of the base for the hairpin + allowances for bends on both sides.


We glue the tape to the base with hot glue, first on one side.


Next, apply glue to the top of the base and apply the tape, pressing firmly with your fingers.


Apply hot glue to the inside of the base.


We fold the ribbon and glue it with hot glue. In this way we cover the entire upper part of the base.


As a result, you should get something like this for a hairpin – already beautiful and bright.


The next stage is making the monkey itself. In this work we will use brown and gray grosgrain ribbon.
Take the brown ribbon and roll it into a small circle, secure the end of the ribbon with hot glue.


Next, we fold another circle, but this time it’s smaller – we get a figure in the form of the number eight.


Now take the gray tape and roll it into a circle of small diameter and secure the end of the tape with glue.


Then we make another turn around the small circle, but a little larger in size and also fix it with hot glue.


Next, we make the third turn a little larger than the second and the last fourth turn, after which we cut off the excess tape and secure the end with hot glue.


We place the finished blank of circles in the large lower circle of the figure eight and secure it with hot glue, pressing firmly with our fingers so that the parts are well fastened together.


For the top circle of the figure eight, we use gray tape to create just one circle of smaller diameter and also glue it inside it with glue.


From brown tape, cut two 15 cm strips for the monkey’s eyelids.


We twist both strips into tight rolls and secure the ends with hot glue.


For the ears, cut two brown strips, 7 cm long each, and two gray strips, 5.5 cm long each.


Roll into circles and glue together.


We place the gray circles in the brown ones and fasten them together with hot glue.


We place the eyelids in the upper circle, gluing them to the base with hot glue.


We glue the ears on the sides, giving the head a monkey shape.


We glue plastic eyes to the lower part of the eyelids.


We tie a small bow from a thin satin ribbon and glue it near the monkey’s ear.


Well, everything fundamental for the hairpin is ready, all that remains is to connect them together.


To do this, apply hot glue to the crocodile clip and glue it to our monkey. We wait until the glue dries, after which you can use a beautiful and bright hairpin for its intended purpose. This DIY monkey is ready for the New Year!


Let your little ones be the most charming and fashionable.

Natalia Nesterenko

Good day everyone, who came to visit me. I am very happy.

I saw it on the Internet toys- pendants made of paper strips, I really liked them. I decided to make my contribution and tried to do it pendant toy"Monkey".THAT. What I got, I present to your judgment.

We will need: brown cardboard, beige paper, scissors, ruler, pencil, glue, pieces of ribbon, piece of wire, awl, decorative eyes, double-sided tape.

Cut the brown cardboard in half and line it one centimeter at a time.



Cut into strips.


Glue the strips into balls. In a small ball, we pierce a hole for a loop with an awl and insert a wire.




We cut out two circles from cardboard, glue them onto the balls, and glue the balls together.




Cut out parts for the face and tail monkeys.


Glue the face and glue it and the tail to the base monkeys.


Preparing ribbons for paws and decoration.


Attached to monkey. The pendant toy is ready.


Thank you for your attention.

Publications on the topic:

Hello dear colleagues and friends! Allow me to present to your consideration another master class. Such original pendants will decorate any room.

New Year is always a sea of ​​gifts. Adults, as usual, go to the shops, and children try to make something with their own hands. Crafts made.

I present to your attention my craft. You will need: 2 packages of processed cheese, color. brown paper: 11.5*11.5 cm - 4 pcs. ,18*2.3.

The symbol of the coming New Year is a mischievous monkey. I bring to your attention another craft dedicated to the hostess of the year 2016 from the traditional one.

Master class “Symbol of the year - Fire Monkey”. Meet the symbol of the year – “Fire Monkey”. My craft is made using the felting technique.

Photo1. For work we will need: - scissors, - white cardboard, - yellow self-adhesive, - green (3m) and white (7m) tapes (width 1cm, - adhesive.

Materials for work: sets of colored cardboard and colored paper, scissors, glue, pencil, ruler, stapler. For preparing the rim.

In this material we will look at how a wicker monkey is created. It’s not difficult to make a template for it, and then we’ll tell you how. A souvenir made with your own hands will become a decoration in the New Year's interior. Creating such crafts will bring a lot of joy to children and mothers. A monkey made from ribbons is a great gift for family and friends. When creating this baby, invest positive emotions and let her bring a lot of joy to your home.

Materials

So, as a result, we should get a monkey. A template cannot be created without special materials. To make a monkey you will need: satin ribbon, felt, you can take what you have in stock, its color is not important, scissors, glue, ruler.

Instructions

Let's move on to the practical part of solving the question of how to create a monkey from satin ribbons. Let's create separate blanks for each part of the monkey's body, you should get: two brown and pink bellies, a tail, a head, 2 arms, 2 palms, 2 legs, 2 feet, 2 ears, 3 parts of a muzzle. Thanks to these blanks, a monkey will soon be created from ribbons.

Let's move on to the next stage. To create the legs and arms, you need to prepare a brown ribbon. Its dimensions are: width - 6 cm, length - 35 cm. We assemble the ribbon into an accordion and tighten it to a size of 4 cm. You will get one leg or one handle, three more such blanks of the same size need to be made. The pink lower part is attached to the resulting blanks. To make it, take a ribbon 6 cm wide and 13 cm long. We tighten it with an accordion to make a workpiece measuring 1.5 cm.

An association

Our ribbon monkey should be one piece. We connect the brown blanks for the arms and legs with the pink one. We make the monkey's face in two parts. These two elements should take the form of round petals. In order for the part to turn out to be the correct shape, exactly the one needed to form the head, you need to cut off the small end from the brown petal and move the ends in different directions. We singe the cut part so that it becomes flat and wide. We cut off the pink part larger, the finished product should be 5 cm in size. We make the ears from brown ribbon, their finished size is 4x4 cm. Our ribbon monkey has a felt base. Let's create it. All tape elements will be attached to it. Dimensions for the base: head diameter - 3 cm; the height of the pear-shaped body is 4 cm, the width of the lower semicircular part is 3 cm. The length of the legs and arms is 4 cm. The size of the tail is at your discretion.

Algorithm

All the details are prepared, we are assembling the New Year's souvenir. You must have two identical felt blanks. We attach the legs and tail to the first part, having previously attached ready-made tapes to them. We apply a thin adhesive material to their base and attach brown tapes, and pink ones for the feet. Then we connect exactly two bases, apply them carefully so that their edges match. We attach ready-made handles to the side that will serve as the front. They can be attached in different ways, for example, so that they dangle at the bottom or stick out to the sides, inviting a hug. We glue the round ears to the felt head. For the tummy, roll up a pink accordion ribbon, apply glue to the felt in the center of the body and apply the pink part. We attach a brown ribbon around the resulting pink area.

The execution of the muzzle must be taken responsibly, because this is a face, it should turn out cute. We place the pink part of the muzzle in the center of the head and attach only the upper part to the felt, leaving the lower part free. We attach a brown accordion around the pink petal. We apply a double red petal to the free side of the pink muzzle and attach it to form a mouth. On the outside of the red petal we apply and carefully glue the brown petal. The mouth is ready. The New Year's monkey just has to mark his eyes. It is necessary to mark the place where you need to glue the eyes. They can be cut out of felt, but it will be more interesting when the eyes are “live”; this option can be bought in special stores. The monkey is ready, you can put it under the Christmas tree or attach it as a Christmas tree decoration. By giving such an interesting souvenir to your loved ones, you can cheer up. Now you know how to weave an amazing animal from ribbons.

A monkey made from ribbon is a super cool souvenir and gift for the New Year. Good afternoon, dear friends and visitors to our online magazine, today we will look at a master class on monkeys from the tape. Soon, very soon, winter will begin, and with it our favorite holiday, New Year. According to the eastern calendar, this will be the year of the monkey. As you probably noticed, the craftsmen have already begun to prepare for the long-awaited holiday and prepare all sorts of interesting souvenirs for the New Year. On our website, you can already find cute, cute monkeys that can be a wonderful gift for your beloved family and friends. Go to the section and there you will find many interesting ideas for the New Year. And now we will learn how to make a cute monkey from a satin ribbon, the author of this master class is Tatyana Pustovalova. The master class on monkeys turned out to be very educational and interesting.

To make a monkey you will need:
* Satin ribbon 0.6 mm. pink and brown.
* Satin ribbon 5 cm by 5 cm, red, brown and pink.
* Satin ribbon 4 cm by 4 cm, brown.
* Felt color is optional.
* Scissors.
*Glue optional.

How to make a monkey:
First we need to prepare the individual parts and then we will connect them. The photo below the numbers is well written and shows what parts to make and why. To make legs and arms, we use brown and pink satin ribbon, 0.6 mm wide. and 35 cm long. We assemble it with an accordion and tighten it to 4 cm. We string the pink blank on top. In this way we make all the preparations that are described in the picture. To make the muzzle, we make round blanks with you. But there is one little secret when making a round petal. After you have made the round petals for the muzzle, cut off the tip again and “spread” the ends in different directions. Press with tweezers and singe - then the tip will be flat and wide))). And we trim the pink petal more tightly - about 5 mm from the tip. We retreat so that he doesn’t come forward too much.
We also need to cut out a blank monkey from felt, and we will attach our parts to it.

The handles can be distributed in different directions.

Glue the finished ears in the right place. We roll the pink accordion into a spiral in our hands and glue it to the center of the tummy. And around the pink one we glue a brown accordion.

Take a pink round petal and glue it with glue as the author showed. Apply glue to the very tip and leave the bottom free.

Glue a brown accordion around the pink petal.

We lift the pink petal and glue a red double round petal slightly under it. We also apply glue to the very tip of the petal.

We glue the finished eyes to the place we need.

If you think that the monkey is not so fluffy, then you can make another brown accordion 15 cm long. We tighten it to 1.5 cm and glue it to the place we need. That's it, the satin ribbon monkey is ready.

Copyright © Attention!. Copying text and photographs can only be used with permission from the site administration and by indicating an active link to the site. 2019 All rights reserved.