Incidents 

Volumetric herringbone made of paper stencil. Stencils of a Christmas tree and branches of a Christmas tree for the New Year for cutting out of paper on a window, wall, for Christmas tree decorations, garlands, decorating a room, at home: photo. Openwork Christmas tree made of paper - stencil: print. Stencil stars and tops

A voluminous Christmas tree made of paper will be an elegant decoration for your table or a lovely gift to your colleague at work. It looks unusual and elegant, and it is not at all difficult to make it.

Christmas tree postcard made of paper

To make such a Christmas tree out of paper, you will need base paper, decorative paper or unusual cardboard for decoration and decorative lace, as well as sequins or rhinestones, scissors and glue.

Cut out the pieces for the postcard according to the template: the base from the base paper and the decorative elements from the glittering paper. Glue the elements to the base, fasten the lace with which you can close the postcard. Decorate it outside and inside with rhinestones or sequins. This postcard looks stylish and sophisticated.

Simple herringbone made of paper

Cut out different sized circles from green paper, from large to small. Make cuts in the circles and bend the tips slightly to create triangles. After you make all the blanks, take a cork or a plastic cap, stick a bamboo stick into it and string paper circles on the "trunk".

Ethnic paper tube herringbone



Another idea for a postcard - such a postcard will appeal to a cheerful creative person. Cut out the base of the card from heavy paper with an unusual texture. Round the corners. Then start making the Christmas tree. Take scraps of colored paper: you will need 10-15 rectangles, decreasing in size. Color magazines and posters, old colorful wrapping paper, etc. are great. Roll up small "tubes" from rectangles and glue them to the base of the card in descending order. Decorate the top of the Christmas tree with a bow, star, unusual button or snowflake.

More options for homemade New Year's cards -.

Herringbone on the table from an old book



Take any old book - it is better to let it be a small book (A5 and smaller) or a notebook. Draw a cutting stencil on it and use a sharp clerical knife to cut out the Christmas tree. That's all - you just have to paint it with paint from a spray bottle or balloon and decorate the top with a star, a ball or other suitable toy.

Herringbone made of cardboard and twine



Take a sheet of thick paper and roll it into a cone. Now take twine, textile or leather cord, woolen thread, or any other thick thread or rope and wrap the cone tightly. Secure the ends of the string. You can decorate such a Christmas tree with a garland, beads, snowflakes, or you can even just stick in decorative safety pins with beautiful heads (they look like small beads) to give the impression that the tree is decorated with a scattering of small balls.

Herringbone made of paper molds for cupcakes



Roll the paper into a cone as in the previous description. Take a lot of paper cupcake molds and cut out the bottoms - you are only interested in the corrugated side. Glue, starting from the bottom of the tree, this corrugated paper onto the paper cone. As a result, you will get a nice fluffy volumetric Christmas tree made of paper.

Fantasy Christmas tree made of paper



Take colored paper in two shades of green. Cut concentric circles of decreasing size from it. Decorate the edges of the circles with gold or silver paint or sparkles.

Now bend the circles in half, then unbend and bend in half elsewhere. Smear the folds with glue and connect, pushing the smaller ones onto the larger ones and alternating colors. Decorate the top with a ribbon, rhinestone or paper star.

Christmas tree made of paper - origami



Fold a square piece of paper twice diagonally and twice in half to mark it with folds into 8 triangles. Now fold it diagonally and place it at a right angle to you. Take the right and left corners and fold, fold inward - you should get a square.

Now take the corner that is facing you (bottom corner) and fold it up inward. This must be done on the other side as well. Use scissors to cut the top sides and cut out the leg for the tree, then unfold the sides of the tree and fold back the paper as shown.





Hard? Dont be upset! Do you know what origami can be done? They will look great not only on the windows, but also on the tree itself. Happy holidays!

The Christmas tree is one of the main attributes of the New Year. No one forgets about her: people buy both alive and rush to decorate them with different outfits - toys and garlands.

Today's Christmas tree does not need to be cut - it is made with your own hands from paper. It is only important to find beautiful cutting patterns that you like.

How to make a Christmas tree out of paper, which can be placed not only in an apartment, but also to decorate a desktop or make a nice gift to family or friends? Very simple.

For creativity you will need:

  • thick paper, but not cardboard
  • stationery knife
  • sewing machine
  • openwork stencils

How to cut and sew a Christmas tree out of paper

1. Find a suitable pattern, that is, a stencil for the Christmas tree. Transfer it to paper or just print on it. Fold the sheet in half lengthwise.

2. Cut with a utility knife, after placing a sheet of thick cardboard under the template so as not to cut through the table. With a stationery knife, you can cut out small parts better and more accurately than with scissors. For a Christmas tree, you will need 2 such blanks.

3. Now fold and sew them together on a typewriter exactly along the fold.

Here's what we got.

4. Tie the ends of the threads in knots and then cut with scissors.

5. Now place the tree upright and spread it out. It turns out a stylish white New Year's beauty. You can spray it lightly with a shiny spray and even hang up small, lightweight toys.

A few more openwork stencil templates to choose from:

Good afternoon dear friends. We continue to prepare for the new year and prepare crafts for this holiday that can easily be turned into gifts. In the last article, we analyzed it in general, and today we will create Christmas trees in a narrow profile. Link to the previous article.

Today's crafts will be exclusively made of paper. And there are so many instructions that even a child can cope with the creation of a Christmas tree with a normal approach. And if it seems a little to you, then you can try to make or create it yourself.

In the meantime, we will start creating beautiful forest beauties that will decorate your home throughout the holidays. And if you make a few pieces, you can assemble a whole fairy forest on the window.

Take a regular sheet of paper. Of course, ideally it is better to take green, but white is also suitable. We bend the sheet in two along the long side and apply the scheme shown in the photo below.


After drawing the pattern, cut it out along the lines and bend it as shown below. We make three blanks, and then glue them together. It turns out very nice and stylish. I'm sure you won't see such trees anywhere else.


The following set of templates for manufacturing will allow you to create a Christmas tree in 3D. You need to save and print templates. We put the diagram on a sheet of paper folded in two along the long side. And then we cut it out.



We cut out along the main contour, and where there are lines inside we only cut it. We bend the cuts at the end. Here, too, it is necessary to make two identical blanks in order to glue them at the end and get the volume.


If you wish, you can cut not just a Christmas tree. And a Christmas tree together with a fawn or a small Christmas tree standing next to it.



If desired, any craft can be colored to make it stand out from the rest of the Christmas trees. You can also use paints that glow in the dark.


And here's proof that kids love to do needlework on their own.


Here are our beauties and ready. It turned out just gorgeous. How do you like this idea?



For the next tree, it is better to immediately take colored paper and immediately make a green tree. The tree is created from loops and curls.




On that account, if something was not clear to you from the photo, I will leave a video clip on creating such a masterpiece.

Origami Christmas tree (simple diagram for children with a description)

Many people have been able to fold various figures from a sheet of paper since childhood. Well, remember you made airplanes or boats all this is a simple origami technique. And I just can't help but tell you that you can make a Christmas tree using the origami technique.


In order to fold the tree, you need to find an old book without a thick cover or a notepad covered with writing. Found it? Now let's continue, wrap all the pages from the left corner to the middle. And so everyone. Therefore, a book that is too thick will not work.


After that, we fold all the pages into a bag again.



The lower tail will need to be trimmed with scissors. Try to do everything slowly and carefully.



The product is completely finished. It remains only to straighten all the pages and sprinkle with sparkles.

And how is this idea. The herringbone is made a little more complicated, but it turns out more beautiful. First, practice on a white sheet, and then when you understand the whole process, you can do it from green.

The next beauty can be suggested to be made to children in a labor lesson in elementary school. All instructions are provided below.



How to make a voluminous Christmas tree out of corrugated paper for the New Year 2019

As promised above, today there will be various options for making forest green beauties. And for the next craft, you will need special crepe paper or crepe paper. You will get a very beautiful Christmas tree.

You will need to find:

  • cardboard or thick paper
  • corrugated green scrap paper
  • scissors
  • red paper
  • various bows
  • beads

Production stages:

We make a beautiful tall cardboard cone and glue it over with green paper.



Make the strips about 10 cm long. Wrap each strip on a thin wooden stick or on a small brush to get such a bud.


Fluff each bud and stick to a paper cone. Over a hundred of such curls will need to be made on a cone about 10-15 cm high. To decorate the Christmas tree, you can use both ready-made bows and homemade ones. Christmas balls can be made from cotton balls sprinkled with sparkles.


If the first option is too difficult for you, I suggest another option for making a Christmas tree from corrugated paper. It is less labor intensive.

We make the base of the Christmas tree from cardboard. Rip paper will be required green, 18 cm wide and 2 meters long. We fold it in two along the entire length. Apply glue from the edge, leaving a free strip of 2 cm.


We glue and pull together to make a small skirt.



Next, with this blank we decorate our cone in a spiral. Do not forget to glue the strip to the cone. Finally, decorate with improvised toys.


Or here's another option for making a New Year's beauty. We cut multi-colored strips 2-3 cm wide and wrap each strip with a cardboard cone to the very top.


Or you can do it like this.


New Year's beauty made of colored paper and cardboard

To make such a Christmas tree, you need to make some blanks, three semicircles of different diameters. On each semicircle we make small cuts to create a fringe.


Then we twist the fringe with the help of scissors. And we glue the cones from the blanks. Well, further, we put on a large cone less on the average smallest. Finally, we will make a beautiful star.




And here, a similar option, but only in the video there is a small life hack on how to quickly and beautifully cut these circles.

But such Christmas trees will look very organic on the festive table. All are made from the same paper circles of various shapes. By the way, if the question of making salads is still open for you, here are some tips.




Or here is such an option for making Christmas trees from simple wrapping paper.


Well, if you want to make something big, beautiful and warm, you can make a big beautiful New Year's beauty. To make a large Christmas tree, you need to glue several sheets of cardboard. Twist the cone out of them.


Wrap the resulting cone in beautiful wrapping paper.


After removing all unnecessary, decorate the tree with improvised toys and an asterisk.


You can also make a Christmas tree out of cardboard, but we will not make cones here.


You will need to print this stencil.


Next, we cut out the resulting stencil, apply it to the sheets of cardboard, circle it and cut it out. We fold in the middle. We make 8 identical blanks.


We will go through the edges with a hole punch. If there is a curly hole punch, you can use it. We glue the middle with double-sided tape.



Then we sew with white threads along the holes made. And we also cut out an asterisk.


Finally, it is advisable to decorate with artificial snow and white sparkles.


From paper circles and a wooden stick, try to make such a multi-colored Christmas tree.


Or try using candy wrappers and magazine clippings to create the same Christmas tree. Finally, coat the tree with glue and sprinkle with flour or sugar.


You can glue a Christmas tree from paper handprints. Preschoolers will really like this work.


And here is another master class for creating a Christmas tree from a glossy magazine.



And with such a Christmas tree you can decorate your workplace. You will need a green A4 sheet of paper. Cut out a triangle, make a hole in the middle with a standard hole punch. We unfold the accordion and put it on an impromptu trunk. Which can be made from the same sheet of paper rolled into a tight tube.




On the Internet, you can find such tips. By the way, individual elements can be used as decoration for the space around you.


A tree made of loops is something new, I really wanted to do something like that myself.


Another option for making crafts from loops.


Here's another idea of ​​how you can make a Christmas tree from improvised means.


Let's go back a bit to decorating the office table. The next tree will be made of reminder leaves.


And even up to a schoolboy can cope with this task.


Maybe you haven’t tried to make a Christmas tree using the quilling technique yet? So here's a good idea for you.


Master class on making a New Year tree from napkins

Yes, yes, even from napkins you can make a beautiful New Year's beauty.


In order for you to get such beauty. You need several layered wipes. We draw circles on a napkin, cut out and cut each circle in the center with a stapler. After each layer we crumple up to form a circle. Here are some photo tips to help you.





You can arrange such a tree in the style of a topiary.

Christmas tree stencils for cutting and printing

If you prefer the vytynanka style and you like hard work. I propose to make a Christmas tree to decorate the windows. Using this template, you can make a Christmas tree in 3D.


We will make the slots in one workpiece from the top to the other from the bottom. And put them together.




The stencil is printed.



Folds in two and is gradually cut out.



One craft is assembled from two blanks.


And here are just your templates that will help you create this stunning beauty.







Do-it-yourself volumetric Christmas tree for a New Year card

By all means, each of our friends or acquaintances will be waiting for gifts and congratulations on New Year's Eve. And for each gift or congratulation, you can make an original postcard. And I, I will help you with my tips on how you can make a beautiful paper card with your own hands.


To make the simplest postcard, you will need to print a small blank. Make cuts along the lines and fold and glue to the main background.




If you do not understand something, here is the help in the form of a video clip.




Or try making a postcard like this.



Paper tree on the wall

Who said that the craft should be small and remote. I propose to make a large Christmas tree that will be mounted on the wall. There are immediately finished options, and there is an option in the form of a coloring that you can color as you wish.

The first tree will be like this. We will make it from cut strips.


The second option will need to be downloaded and printed. Then collect on a large sheet of Whatman paper.



Of course, these are far from all the options for Christmas trees that can be made for the New Year holidays and decorate your home, office or room with them. But these options seemed to me the most beautiful and more New Year's. I wish you a Happy New Year.

Good afternoon, today I am uploading the largest selection of Christmas trees made of paper. Here you will see the most interesting models- there will be Christmas trees made of crepe paper, from napkins, from cardboard, you will learn how to make a Christmas tree from a paper cassette from eggs, from rolls of toilet paper and bags rolled from book pages. In this a selection of master classes we will consider only paper versions of the most beautiful Christmas trees with our own hands - both flat models and volumetric designs. Here are ideal options for crafts for the New Year's school competition.

So let's get started.

Idea number 1

Beautiful Christmas tree FROM PAPER FANS.

Even children will be happy to make such a voluminous Christmas tree. The principle of addition is very simple - you must first make fan circles of different sizes. And then string these circles on the SAME ROD BASE (which we used in the previous Christmas tree). Or it is possible without a rod - just stick the tiers on top of each other (dripping a drop of glue in the middle of each "floor" of the Christmas tree.

Below we see the principle of creating such fans. They are made from a long strip of paper. The strip folds into an accordion. We fold the accordion into a ring (fastened along the edges with glue). After the glue dries - stitch one side of the accordion ring with a needle thread- we pull the thread (very carefully so as not to break the paper) - and at the same time we put the accordion ring in a flat circle. We press with some object in the middle of the resulting circle - thereby we press the convex edges of the accordion so that they wrinkle and become a little more flat.

Different sizes of herringbone tiers are achieved by a simple principle- the narrower we have a strip for an accordion, the smaller the circumference of the fan obtained from it will be. Below in the photo you can see a detailed master class on creating such a Christmas tree out of paper.

Such a beautiful Christmas tree is obtained from bright paper napkins or from sheets of gift paper.

And if you put a BEAD between each tier of a fan tree made of paper, then we get air, the space between the tiers of the tree (as is done in the photo of the paper tree below).

Idea number 2

Herringbone-box FROM PAPER.

But this method is the most convenient for novice craftsmen. Convenient in that a simple drawing here gives a guarantee of a 100% result in the form of a neat volumetric Christmas tree made of paper. Moreover, this tree can be used as a packaging for small gifts, if you hide jewelry or a bottle of perfume inside.

Since the layout of the drawing above requires a large square piece of paper, I give a more economical way to use the paper space (the diagram of the chaplons in the photo below). You can cut the blades of the Christmas tree separately in two pieces. And then fold, glue them cross to cross.

Idea number 3

BLADE Christmas tree made of cardboard.

And here is a bladed Christmas tree made of cardboard or thick paper. It is also very easy to do it yourself. To create such a tree, you can use ordinary corrugated packaging cardboard (as in the photo below).

How many blades-wings can such a cardboard Christmas tree have?

You can make a four-bladed Christmas tree - if you cross two flat pieces together. To do this, in each silhouette of the Christmas tree, you need to make an incision along the central centerline to the center of the Christmas tree. On one part, an incision is made on the UPPER HALF of the silhouette - on the second part, the notch is located on the BOTTOM HALF of the silhouette.

I found such a stencil for a Christmas tree made of paper, but you can take any other shape of a Christmas tree with any lines of the legs (smooth, rounded, curling up, etc.).

If desired, such a herringbone crosspiece can be placed on the base in the form of a roll of cardboard (a saw cut from a roll of toilet paper is suitable). On such a roll, we make 4 cuts (to the south, west, north, east) - and into these cuts we insert each of the four blades of our Christmas tree.

But a herringbone can have more than four blades - FOR EXAMPLE, you can make two silhouettes - 2 with a notch at the bottom and 2 with a notch at the top.

And then combine them into such a Christmas tree with the photo below - it will have as many as 8 blades(as in the photo below). Each blade can be pasted over with a different shade of green colored paper. As a finishing paper, you can use gift paper with polka dots, diamonds, flowers (as in the photo below)

Using a similar paddle technique, you can make beautiful toy balls for such a Christmas tree - also from paper.

Idea number 4

Christmas tree made of paper circles.

And here is another idea for a volumetric Christmas tree made of paper. We make this tree from ordinary flat paper circles. We fold each circle many times along DIAMETER LINES. We align each edge of the fold with alternation - one up, the second down, one up, the second down, etc. A detailed master class in the photo below.

You can improve such a model of a Christmas tree, if, in addition to everything, bend half of every second such rib upwards - as if forming bucket shape(how is it done in the photo of a Christmas tree made of paper below). And in each such curved ladle-foot he will put a bright bead. And we will get an already decorated Christmas tree made of paper with a beautiful volumetric shape.

Idea number 5

Flat herringbone IN ORIGAMI TECHNIQUE.

And here is another simple one example of origami technique to create a modular Christmas tree from paper.

Here we simply fold paper modules from a square napkin (the napkin folds 2 times across the floors, and then unfolds and folds again 2 times in half, but DIAGONALLY.

Then we lay out the napkin back and bend it along the lines formed so that each corner of the diagonal bend is like a separate blade.

From several such blade modules-tiers, we fold the herringbone - simply by gluing it on a flat base. Often such an origami paper tree can be seen as an applique on a New Year's card.

Idea number 6

Christmas tree made of PAPER,

strung ON the ROD.

If we have a rod, which we made to stand exactly upright and not fall, then by stringing a variety of paper silhouettes onto it, we can get a Christmas tree-craft.

The main rule to follow is to make sure that the bottom paper silhouettes are larger than the top ones. That is, so that the size of the parts decreases as you move up to the top of the tree.

The most important thing is to MAKE A ROD. How easy and quick to make an axis-base from a cocktail tube, so that it turns out to be strong and unbending.

But what herringbone (pictured below), which is made from STRIPES of felt, but it can also be made from strips of colored paper or cardboard).

Everything is also very simple. MATERIAL: cut stripes the colors we need, we take glue stick(it is better to insert 2 turbines one into one to make it longer), cardboard(for the base circle), hole punch, and stapler(either glue or threads with a needle. Now I will tell you in detail how we will make such a Christmas tree at home - with our own hands.

STEP ONE. We are preparing the base-rod for the Christmas tree-crafts.

And cut out 2 identical discs of cardboard. Leave one cardboard disc intact. And in the middle of the second disc we make a round hole (we pierce it with a nail and expand it so that the tube from the cocktail crawls through). Thrown into a cardboard disc cut the tube with scissors from the bottom side(vertical cuts of 1 cm - chick-chick - how we cut straws to inflate soap bubbles). We push these cuts to the sides like rays of the sun. And we get such a "beam-shaped spread-leg". We put this spreading leg on the second cardboard disc (the one that remained intact, without a hole).

And now we Glue BOTH DISCS - and it turns out that the leg-spreading is now with its rays, clamped-glued between the cardboard disks - and as a result, our cocktail tube stands EXACTLY VERTICAL RIGHT.

STEP TWO... We string the material for the "plumage" of the Christmas tree on the rod.

Cut the tape (fabric or paper or felt) into strips. Please note that the stripes are not the same length. Each pair of stripes is 1-2 cm smaller than the previous pair. In the center (middle) of the strips, we make holes with a hole punch (or cut with a nail or scissors). We string the strips on a tube-rod - first the long ones, then the shorter ones, and at the end the shortest ones.

And now we glue the strung strips (or sew them with threads, or fasten them with a stapler) in pairs with a sequence such that we get a HARMONY-ZIGZAG (as seen in the photo). We attach a star to the top of the tube - we also cut out two silhouettes of the star (front and rear) - so that the top of the rod is hidden between the two sides of the asterisk.

Idea number 7

Tier tree

made of paper or cardboard.

And here is a nice volumetric cardboard tree. Here we also stocked up with paper circles of different sizes. The edge of the circles was made wavy. Then each circle was cut along the radius - and turned into a cone. And the cones were strung on the rod.

I will show how exactly to string the cones onto the rod so that there is air between them (and so that they do not fold like little friends in a friend) using the example of white lace Christmas trees made of paper, which we see in the photo below.

We need a rod (wooden cooking skewers will do). Large beads and paper lace napkins.

To make cones from round napkins, we make a radial cut. We cut along the line of the radius of the circle from the CENTRAL point to the edge.

Beads between the cones will prevent them from colliding with each other. And our Christmas tree will turn out to be airy.

You can make conical trees out of spare pieces of wallpaper.

You can use sheets of colored office paper.

Idea number 8

Christmas tree made of crepe paper.

Here is another beautiful paper tree for children. Here we need a BASE for the tree in the form of a tall paper CONE. Cut out a semicircle from the paper - and fold it into a bag for the consu.

We cut the crepe paper on long wide ribbons... Then along the paper tape make cuts-fringe. Next, we wrap our paper consumable with this fringed paper tape - starting from the bottom and gradually spiraling, coil by coil, moving to the top. Each incised twist the petal into a curl.

Such a Christmas tree-craft is suitable for classes at school or a circle of Skillful Pens in kindergarten.

Idea number 9

Christmas tree made of crepe paper.

And here is a convex Christmas tree made of a paper egg cassette. Cut out the cells of the cassette holder in the shape of the triangle. We paint them green with gouache. We spray with nail polish (so that the gouache does not stain your hands and the color becomes brighter). And on each bottom of the cassette cell we glue a circle of colored paper. Cut out silhouettes of stars of different sizes from cardboard and form a layered star.

Such a children's craft is convenient for conducting classes in a school creativity circle.

Idea number 10

Volumetric tree made of CONE

(6 ways to make decor)

And here is another tree made on the basis of a tall cardboard cone. We buy a drawing paper (a large sheet of paper) - cut out a semicircle - bend from a semicircle into a cone.

Here is the main monotony of labor in cutting multi-hundred circles. And then there is a gradual pasting with these circles in the form of scales - starting from the lower rows of the cone and gradually moving up the tree-cone. Children who often toss around in anticipation of the New Year holidays will be distracted with pleasure by such a Christmas tree for children. And this is good for you, no one will wander around the kitchen and interfere with you preparing the New Year's table.

Such a cone-tree can be put on a long rod-leg. And put the rod on a plasticine pedestal. We make a thick round cake from plasticine. We bury the base of the rod in plasticine. We decorate the plasticine sole with cardboard and pieces of moss or other natural material (bark, peeled cone scales, etc.).

The pasting of a Christmas tree-cone can be carried out loops from strips of paper. Or if you are too lazy to cut the paper, you can buy a long skein of textile tape, cut it into pieces, bend each piece in the form of a loop and glue it on a cardboard cone - also in rows from bottom to top.

Can be done fabric (or paper) triangular folds. Fold the square diagonally in half, and again in half. Lay the bites of the triangle on top of each other - so that the triangle curls up into a ladle. We will glue the side of the ladle to the cone-base of the tree.


As you understand, it is not necessary to use fabric - you can take regular colored paper, crepe crumpled paper, or even newspaper (and then paint it from a spray can paint).

And for pasting a Christmas tree, you can use paper muffins for baking muffins online... How it is done in the picture below. Such a children's craft will be a real New Year's fun for your children. Simple and fast - and very beautiful.

Idea number 11

Christmas tree with paper straw decor.

And here is another Christmas tree based on a paper cone. Here, fine paper chips are used as the material for pasting the cone. You can find these chips in boxes for shipping fragile goods. Or cut such a straw with office paper scissors - make a voluminous pile of shavings and decorate the Christmas tree with ordinary pva glue.

We also glue cones and Christmas balls on the cone - we put them on hot glue from a glue gun(sold in the construction departments of the store - it costs $ 5, the glue to it is very cheap in the form of rods).

The Christmas tree can be placed on a pedestal made of round log cuts. And crowned with a star. It is also not necessary to buy it - such a star can be made with your own hands from ordinary newsprint. How such a star is made, I told in the article

This is good too option for a simple children's crafts for the New Year... Because it's simple, easy and fast. Ideal for a 20 minute session in the Skillful Hands class. The main thing is to prepare cones, straws and decorative material in advance.

Idea number 12

Christmas tree

from paper rolls.

And here is a tree made of paper rolls. We roll up rolls from ordinary sheets of paper (even from office drafts), attach them to a stapler or glue (so as not to unfold).

In the photo below, we see that an ordinary glass goblet (or a vase for jam) was used as a stand-stand for such a voluminous rolled Christmas tree.

By this principle, you can make a bright Christmas tree if you twist the rolls from table colored napkins.

You can put a rolled Christmas tree on a long stick-leg and stick it into a flower pot with earth.

Here is a classic way to create such a Christmas tree from paper rolls.

But the method where the bags are not glued to the cone-base, but simply laid radially in circular rows.

Such paper bags can create a Christmas tree on any plane - on the wall or on the door to the office. A quick and easy way to make a beautiful office decoration for the New Year. I have collected even more ideas for New Year's decor for offices and office premises in a special article.


Idea number 13

Christmas tree in the QUILLING technique.

(4 ways from flat to volumetric)

And here are the Christmas trees made of paper, made using the QUILLING technique. They can be flat as in the photo below.

It's simple.

STEP 1 - the paper is cut into strips.

STEP 2 - Each strip is twisted around a quilling rod (or a simple toothpick).

STEP 3 - The twist fits into the circle-hole of the stencil - and inside this round frame of the hole we relax the twist (so that it unfolds slightly, but within the specified size).

STEP 4 - Next, we carefully remove the twist from the stencil and glue its tail (so that the twist does not unwind further, but retains the size set by the stencil. So we get round twists of the same size.

STEP 5 - Then we take a round twist and with our fingers we set the FORM of the twist - it can be DROP-LIKE (as in the photo with the herringbone below). And from such twists we glue our Christmas tree out of paper.

Such a children's craft can be offered in the classroom in the school creativity circle. It can be done together with grandmothers and children for a kindergarten competition.

The corners of the droplets can be slightly bent upward (as in the photo of the Christmas tree below).

You can make Christmas trees using the quilling technique for any fantasy shapes.

TWO-LAYER Christmas tree using quilling technique.

But a Christmas tree made of paper in the same technique - where quilling modules are glued not on a sheet of paper but on themselves - that is, they are glued sideways to each other. And such gluing of paper strings is stacked in two layers.


Quilling tree made of paper - ON THE ROD.

The twist quilling can be placed on the stem. From cardboard we make a rod on the edges of which we will glue the twists. Here we see a striped herringbone where the twist modules are attached to a central cardboard rod.

And here is a herringbone where the central core made of cardboard has a hexagon section - that is, this core has 6 sides and 6 edges. On these flat sides, we attach the base of the paper droplets. Please note that there are droplets of different sizes - at the bottom there are large swirls (made according to a large stencil-hole), and at the top there are smaller ones. We attach a rhinestone to the tip of each drop.

You can glue the twist-droplets with the barrels down, as is done on the tree from the picture below.

The quilling twist can be placed around the round bar - and put the modules in a horizontal plane (as in the photo of a quilling Christmas tree made of paper below).

Fastening modules to a round bar will serve another even strip of paper the same color. First, we wrap the paper around the rod. on glue- we leave the tails sticking out on both sides of the rod - and stripes between these ponytails we put our ready-made twist, and hug it, wrap it with tails - gluing them to the twist. For such fasteners to hold better – we repeat it with one more strip of paper (and, if necessary, with another strip) - this way our swirl will perfectly keep its horizontal plane.

You can make a simple quilling herringbone from weak looped and curly twists made of cardboard or thick non-quilling paper (as is done in the photo below).

Quilling tree made of paper - BASED ON A CONE.

You can glue the twist modules not on a rod, but on a classic cone base.

The cone can be round(as in the photo above). Or the cone may have rectangular section- that is, have ribs and flat sides (as in the photo below). On such planes cone-pyramids it is convenient to apply any quilling patterns. And we get a patterned 3d tree.

You can connect children to such a craft. They will be happy to wind up the modules. And then they will help you to paste over the pyramid-tree with them. Nice children's New Year's craft.

Idea number 14

Christmas tree-craft from bushings

from toilet paper

And here is another idea for a paper tree. Here, rolls of cardboard and paper of different diameters are taken as material. You can use rolls of scotch tapes and masking tape, supplement them with cardboard rolls from toilet paper (shortening them to the height of scotch rolls), you can use narrow tubes from office fax paper (also cut into short lengths). Tighten homemade cardboard rolls.

And from such a prefabricated material, fold and glue the Christmas tree. Rolls can be glued together with a glue gun, or with double-sided tape. A simple craft in which children will take part with pleasure.

You can only use toilet paper rolls of the same size. And fold a Christmas tree out of them in the form of a pyramid. We pre-paint the rolls green, dry, glue. To prevent the gouache paint from sticking to your hands and not dyeing your clothes, painted and dried rolls should be sprayed with hairspray - the paint will fix and the color will become brighter.

We put a Christmas ball inside each roll (you can just put it or hang it by a hole in the roll) - you can instead of a ball put a large candy in a shiny wrapper... You can decorate the bochina of such a Christmas tree made of paper ores with New Year's glass beads.

If you start collecting rolls in advance and involve the entire staff of your company, then you can make a very tall large Christmas tree to decorate the office.

Here's another way to design a Christmas tree from paper rolls. Here, a more economical consumption of material, since the herringbone empty inside... Just rolls are made rings- (rolls just stick together in a round dance with their sides. And then such round dance rings from rolls are placed on top of each other and Christmas balls are put into their sockets. We pre-paint the rolls in the desired color.

These are the ideas for a Christmas tree made of paper with my own hands, I have collected today in this article. Now you can choose a simple and beautiful way to make a Christmas tree for yourself. Good luck with your New Year's creativity and beautiful Christmas trees, crafts. May everything work out now and in your New Year.

Olga Klishevskaya, specially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to Olga Klishevskaya, the author of this article.