How to inflate a foil figure balloon at home. How to deflate a foil balloon with a valve

Along with latex balloons, aerodesigners and holiday decorators use foil balloons in their work - universal view balls. Foil figures allow you to diversify the air composition and are used as independent decorative elements.

Foil figures are on the market in different sizes: From tiny stick figures to giant walkers. Foil balloons on sticks are suitable for both retail and room decoration. Thanks to the sticks, the figures are inserted into all parts of the decorative structures.

Walking foil figures do not need decoration. "Khodyachka" is a completely ready-to-use product. Throwing a Spider-Man themed party? The giant figure of the hero will fit into the overall look of the party and attract attention.

The heads of animals, favorite characters from milar are used in conjunction with latex balloons. The body is made of latex, and the head is made of foil.

We mentioned milar. Mylar film is the material from which foil balloons are made. Distinctive feature milara - the material does not allow air to pass through.

As a result, the product retains its initial inflated state for two to four weeks. It happened that the balloon remained inflated for a couple of to three months. It all depends on the use of the product.

But now the balloon has expired, the product has been blown away. And I don’t want to carry such beauty to the trash, because outwardly nothing happened to the figure, it still looks high quality.

A feature of milar products is that they are reusable. This product not disposable. A foil balloon can be re-inflated, and it looks no worse than when it was first inflated.

The foil products in question have convenient valves for filling with air. The valves are specially designed to make it easier to deflate the balloon and allow it to be refilled with air.

What if the celebration is over, but the ball is not "exhausted", and you want to do it for him? How to release air from the milar figure so as not to damage the valve. The process is painstaking and requires care and patience.

To lower the figure, prepare a cocktail tube. Carefully unstick the valve and make a hole with a straw. Take your time so that the milar does not break and the valve remains intact.

You will feel that the air is slowly leaving the tube without the efforts of others. After a minute, begin to gently press on the figure, helping it to get rid of the air. Continue until the product takes on its original flat appearance.

Re-inflate the product with care. When inflating with air, use a straw. If you want to inflate the balloon with helium, use a balloon that is provided for rent by specialized companies.

If the product is expected to lie on the shelf until next year(walking figure of Santa Claus on New Year, for example), observe the rules for storing milar figures. The balls are stored in a room with a low temperature and are separated from each other by polyethylene, film or paper.

Reuse foil (mylar) balloons can be a great way to create a birth tradition.

great way save some money on holiday decoration. You can reuse old foil balloons. If you carefully deflate foil balloons and properly store deflated balloons, they can be reused and inflated for the next party. Foil (Mylar) balloons are equipped with a self-closing internal valve. If the walls and the valve are not damaged, then the balloon remains airtight and can be reused.

Reusing foil balloons requires some preparatory steps: deflating and preparing them for storage after the first use.

How to deflate a foil balloon

Tips and Instructions

You will need:

• Foil balloon
• Straw for a cocktail
• Helium balloon (optional)

Blowing foil balloons

To deflate the foil hot air balloon you can use a straw for a cocktail. Gently pierce the self-closing valve of the balloon with a straw and push it a little deeper. Be careful! It is necessary to penetrate the tube into the ball slowly and carefully so as not to damage the valve and the walls of the foil ball. The air will begin to come out of the balloon on its own, then while lightly pressing on the balloon, continue to release the air until it is flat as a piece of paper.

If you can't get all the air out, use your mouth to remove the last drop of air from the balloon or use a vacuum cleaner. Then remove the straw from the valve. Deflated foil balloons must be lined with paper so that they do not touch each other.

Storage of foil balloons

Store foil balloons in a dry and cool place. If the balloons are not lined with paper, then when the storage temperature rises, the walls of the balloons can stick together and be damaged. To avoid damage to the foil balloons when long-term storage, they do not need to be added. If the balloons are stored folded for too long, they may crack or tear at the folds. IN ideal, Foil balloons should be stored in horizontal position and in expanded form.

Re-inflating foil balloons

There are several ways to re-inflate foil balloons. Most economically effective option- this is to use a straw for a cocktail, insert it into the valve of the ball and inflate it with your mouth. In this case, the balloon will not fly. If you order decoration with holiday balloons, you can also order the inflation of foil balloons from the decorators. Decorators will inflate your balloons with helium gas for a minimal fee. You can buy disposable balloons low pressure for helium storage and inflate your own foil balloons.

artwister.ru

How to deflate a foil balloon.

Foil balloons, unlike latex, are distinguished by a wide variety of shapes and colors, as well as a long life cycle. With good handling of the ball and periodic blowing, the ball can happen to you for almost years. At one time, back in my childhood, I brought a ball from an amusement park. I was a neat and thrifty girl, so after 5 years I had to blow off the balloon, because I was just tired of it already =) The foil balloon has a useful feature - a self-closing valve. After inflating the balloon, you can not tie it with a ribbon, and also blow it up without problems with partial deflation.

What to do if the ball needs, on the contrary, to be lowered.

The algorithm is simple:

We release the valve from any ribbons and ties, if any; - into the round hole where the valve is located, slowly insert the tube (it can be a drinking straw or a stick for balls); - gently press the ball, remove air from it through the tube.

In fact, the tube opens the valve and prevents the slamming mechanism from working,

air comes out through it.

\ What is most pleasant is that the balloon, most likely, can then be inflated again,

through the same tube it will be much more convenient. =)

Happy holidays to you!

posharam.blogspot.ru

Inflate the foil balloon correctly.

Like regular ball made of latex, foil can be inflated with helium or air. To fly or not, respectively. The foil balloon is made of lavsan film, which, unlike latex, does not stretch.

Therefore, the first and, perhaps, the main rule is not to overblow the ball.

On the heart in the photo, you can see the characteristic wrinkle-stripes on the sides, next to the seams of the soldering. This means that the balloon is fully inflated. But the touch of such a ball will be dense and smooth.

The second rule is closely related to the first. It is better to inflate the balloon at the same temperature at which it will be in the future. Helium, like any gas, expands when it gets warmer and contracts when it gets colder. That is, a balloon inflated in heat in the cold will shrink and lose its appearance, and inflated in the cold to the stop, it will simply tear when it warms up.

Here I will dwell in more detail on cases where it is still impossible to avoid temperature changes.

1. If inflated in heat, carry the ball also in heat, but through the cold.

IN this case There is nothing wrong. The gas will compress outside and inflate the balloon again in a warm room. The main thing is not to be frightened by the wrinkled appearance of the ball in the cold - this is normal. Although for the first time I thought that I was paranoid, and somewhere in the ball there is a strange hole that I did not find in time.

2. If we inflate in warmth, and carry in the cold.

In this case, we inflate it all the way, slightly tighten it with a tape, carry it into the cold and blow it up there. If the balloon is filled with helium and the main task is precisely that it is no longer possible to blow out helium on the spot, then we simply blow it with air. Through a straw directly into the valve. A little bit of air in the balloon will not affect its volatility in any way, but appearance will be saved.

3. Inflate in the cold, carry in the heat.

We leave the balloon slightly soft, but in any case we fill the balloon at least 2/3 of the balloon and until it rises (if you fill it with helium). How more difference temperatures, the softer the walls should be. Next, bring it into heat. If there is insufficient blowup, we proceed in the same way as in item 2 above.

The third rule is related to the ball valve. This handy thing allows you to inflate the balloon without pulling it together with a ribbon each time. The pressure valve inside the ball closes itself, preventing the gas from escaping back.

It looks like a round hole with a translucent (usually) film inside. For inflating with helium, there are usually special adapters in the form of iron tubes screwed into the main adapter. In order to inflate the balloon with just air, it is most convenient to use a cocktail tube or even a handle with the rod removed. In my case, I usually use a balloon stick. We carefully insert it into the hole under the film and, if possible, lead it deep into the ball. It happens that the valve is a little stuck together, so it's better not to do it. sudden movements and insert the tube carefully and slowly. It is better to bring the tube exactly to the body of the ball, feeling that the valve is fully opened. Otherwise, when pressure is applied (especially important when inflating with helium from a cylinder under high pressure), there is a risk of breaking the valve. When finished, simply remove the tube.

The tape can be tied up with both the valve itself (for safety net) and the tail below.

posharam.blogspot.ru

How to inflate a foil balloon.

A foil balloon, unlike latex (rubber), does not stretch and has a valve for inflation, not a neck.

We have already discussed the safety rules for inflating foil balloons in the article here.

Today we will talk only about technology.

If the balloon is inflated with air.

We find the valve of the ball, it usually looks like in the picture: a round hole with a silver color "inside".

We will also need a straw for cocktails (as an option, it can be a ball stick or even a case from a untwisted pen).

The tube must be inserted into the valve hole, under a translucent, and sometimes completely transparent film. Again, just like the picture.

It happens that this film may not be found. In this case, we insert the tube just under upper layer foil towards the center of the ball. Ideally, if the length of the tube allows you to move it 5-10 cm inward. This must be done very carefully. The fact is that a slamming valve sometimes tends to stick together a little (during long-term storage, excessive pressure, or simply high temperature storage). A sudden movement can break the ball and complicate the task. So, putting the tube a little deeper into the valve, try to make a control exhalation into the ball. If no air comes out, spread the balloon or push the tube a little deeper. If it goes, then you can start inflating the balloon. When the ball is about to be almost strong, remember again where you are taking it, and what are the temperature conditions there (see the article http://posharam.blogspot.ru/2015/03/blog-post_6.html). Upon completion, you can confidently remove the tube, the valve behind it will instantly close, and the air will no longer come out. If there is doubt about the strength of the valve, a hiss of escaping air is heard, and the ball quickly lost its elastic appearance, then it is better to blow the ball again and tie the ball with a tape above the valve.

If the balloon is inflated with helium.

In general, the essence is the same, except that in this case it will be necessary to inflate not with the mouth, but with a balloon. To inflate foil with helium, we need a nozzle for such balloons. The complete set looks like this.

The wide part of this nozzle is screwed onto the balloon. (You already know that when buying an adapter, you should take into account the diameter of the neck of your cylinder?).

A separate adapter for foil balls is already screwed into the wide part.

This is the tube that needs to act in the same way as when pumping air.

That is, we introduce into the valve in the direction of the center of the ball, then blow it to required size, take out the tube and enjoy life.

Important when inflating with helium:

In order to avoid breakthroughs of the ball, it is better to pre-blow the ball through the tube with air. That is, literally one exit to make sure that the valve opens and air enters the ball without obstacles.

There is a lot of pressure in a helium tank, even with a slight opening of the valve. Any sharp entry into a poorly open valve, and the valve will simply break.

Have a good holidays.

posharam.blogspot.ru

Foil balloons inflated with helium look tight, take off actively, and retain their appearance and volatility for 10 to 15 days. However, it also happens that through little time, foil helium balloons become soft, limp and appear deflated. The buyer may not even have time to leave shopping mall, where is the store that inflated such balloons for him. As a rule, in this case, the buyer goes back to the store and demands to replace the balls. It becomes even more unpleasant for the buyer if the balloons begin to deflate at his house: he will not even be able to change them.

Why and how foil balloons deflate

Balloons wither and lose their volatility because they lose helium. Foil balloons are made from a thin polyester film, which is completely inelastic. Therefore, it is necessary for an inflated balloon to lose quite a bit of helium (a few percent), so it immediately becomes soft and does not seem to be inflated.

Helium cannot penetrate the walls of foil balloons (unlike latex balloons). lavsan film is not porous. The helium leaves the foil balloons through the weld that connects the halves of the balloon and through the inlet used to inflate the balloon.

An uninflated foil balloon has a weld width of 5 - 6 mm. It should remain the same after inflating the balloon. If the balloon is pumped with helium, the increase in the volume of the balloon occurs due to the thinning of the width of the weld (lavsan does not stretch). Through a seam of small width, helium leaves the ball much faster than through a seam of normal width. Moreover, it is completely useless to pump up a balloon that has already been inflated with helium. After a short time, the ball will again be blown away.

The hole through which the balloon is filled with helium has a check valve with a petal that locks the helium inside inflated balloon. If the neck of the foil balloon is tied incorrectly, the tightness of the check valve is broken, and helium begins to leave the balloon. No matter how much you do not tie the braid, it still will not prevent the helium from leaving the balloon (dacron is not elastic). To maintain the tightness of the check valve, it is necessary either to properly tie the foil balloon, or to seal the neck of the inflated balloon on the sealer.

How to properly inflate foil balloons. Method number 1

The method lies in the qualification of the store staff. Vendors who inflate and tie foil balloons must be able to do it well and quickly. You will have to spend time and a lot of balls on staff training, because. It will cost more to learn from clients.

A skilled specialist quickly inflates the balloons, keeping the seam intact, securely and beautifully ties the ribbon to the balloon, and does not stop communicating with the buyer.

The first way to make quality helium foil balloons requires nothing more than trained craftsmen. Sooner or later, trained specialists will leave, and new, unprepared people will come in their place. And again they will have to be taught and trained.

How to properly inflate foil balloons. Method number 2

There are special gearboxes (for example, CONWIN 83050) designed to automatically inflate foil balloons with helium. The reducer itself measures the pressure inside the inflated ball, and when it is reached optimal value, automatically turns off the supply of helium to the balloon.

With the help of this gearbox, any unprepared person will be able to quickly and efficiently inflate foil balloons with helium.

Instead of tying foil balloons, you can simply seal their necks with a special sealer (for example, FS200). The welded seam on the neck of the balloons securely seals the helium inside the balloon. To the rest of the neck, a braid is arbitrarily tied.

With the help of a sealer, any unprepared person can quickly and efficiently seal foil balloons with helium.

The second way to make high-quality helium foil balloons requires special equipment: an automatic gearbox and a sealer.

Comparison of methods

Both methods give the same result: foil balloons, well-inflated and tied foil balloons. The first method requires trained personnel, and the second method requires special equipment. The cost of staff training is much lower than the cost of equipment. But, sellers come and go, but the equipment remains. Any new seller, with the help of special equipment, after the first inflated balloon, will be able to make high-quality foil helium balloons. Otherwise, beginners will have to be taught. This will be done either by other sellers or by the store owner. All this will take time, helium and balloons.

In my opinion it's better to use special equipment than hopes for sellers. But here, each store owner decides for himself.

Good luck colleagues.

P.S. By the way, the sealer can also be used for sealing foil minifigures.

Foil balloons are made from pieces of metallized lavsan film, with a colorful pattern or plain coating connecting them by thermal welding. Since lavsan film with metal coating is very similar to foil, they are most often called "foil", much less often - "mylar" or "lavsan". Foil balloons are of the following types:

1. Decoration - are made in the form of various stars, a circle, a heart, a crescent moon from a plain film of bright colors. Some manufacturers cover them with holographic paint, which gives the paint a transfusion and sparkle.


2. With a pattern - are produced in the same forms as the design ones, but they are applied or inscriptions for all festive occasions.


3. Symbols are monophonic, as a rule, made in the form of numbers or Latin letters 80-90 centimeters high.


4. Figures - made in the form of animals, heroes animated films and fairy tales various items. They are simple or bulky.


5. Walking figures - inside them are special weights that do not allow them to fly up. At the slightest draft, the figure moves along the floor, turns, swings its head.

What and how to properly inflate a foil balloon?

Balloons small size more often they are filled with air, in which case the ball is usually attached to a tube with a clamp. Volumetric ones measuring 18 inches or more are filled with helium. All foil balloons have an inlet (aka non-return) valve at the base, through which it is inflated with both air and helium.

To solve the question of how to inflate the balloon with air, you can use a hand pump, which has several nozzles and is suitable for all types. If there is no pump at hand, you can inflate by mouth through a cocktail tube. In this case, you must carefully insert the tube into the inlet towards the center of the ball, move it 5-10 centimeters inward and exhale inward. If necessary, straighten the foil ball or gently push the tube a little deeper. After inflating, you just need to pull out the tube, the check valve will immediately close and the air will not come out.

To fill foil balloons with helium, you will need a portable helium tank, a balloon attachment, and an adapter to inflate this type of balloon. The lower, wider part of the nozzle is screwed onto the cylinder, then an adapter is screwed into it. This adapter is the tube that needs to act in the same way as when inflating with air. It is advisable to blow the ball through the tube with air before opening the balloon (just one exhalation to make sure that the air goes). Then you need to press the neck of the ball to the adapter, open the valve on the cylinder and start filling the ball. At first, it is inflated quickly, but when almost full, helium begins to be fed in small portions in order to avoid a burst of the ball. When the foil ball is fully inflated, the valve is completely wrapped, the ball is carefully removed from the adapter, tied with a braid or sealed with a sealer.

A well-filled balloon does not need to be tied, as the non-return valve keeps the filling inside. But, so that the ball does not fly away, a braid is tied to its neck. If you tie a ribbon above the inlet, then the tightness of the valve may be broken and the ball will lose elasticity, so you need to tie the ribbon below the inlet. Balls without a valve are sealed using a specialized device - a sealer, while two welds are formed on the neck of the filled ball, located above the inlet. Then a braid is tied to it.

life span of foil balloons

Their lifespan ranges from a few days to a month. Helium or air slowly escapes through the check valve or through the seams that connect the parts of the balloon.

In addition, life expectancy is affected environment: cold, heat, rain. Therefore, it is advisable not to expose the balloons to a large temperature difference, not to use them in the rain or in the wind, and also to properly fill and tie them.

The second life of foil balloons

In order to save money when decorating a holiday, you can reuse used foil balloons, but for this you need to correctly and carefully release all the air from them, and store them unfolded in a dry and cool place, laying paper between them.

More specifically, how to reuse a balloon. But, unfortunately, such savings do not apply to all balloons, but only foil ones. - These are balls made of foil film. The basis of such balls is a nylon film coated with a continuous metal layer. Compared to latex, it is a much stronger and more durable material. They are varied in shape, color and size - shining in the sun voluminous hearts, stars and cars, cubes and pyramids, human balls and , . These balloons are perfect for any occasion. Therefore, it is on foil balloons that you can save a lot and even come up with a whole tradition of decorating a room.

1. Check the integrity of the ball after the holiday.

Foil balloons are equipped with a self-closing internal valve. Check for damage to the walls and ball valve. If the ball remains airtight, then it can be safely reused.

2. How to deflate a foil balloon.

The answer to the question "how to deflate a foil balloon" is simple - use a straw for a cocktail. Gently pierce the self-closing valve of the balloon with a straw and push it a little deeper. Be careful! It is necessary to penetrate the tube into the ball slowly and carefully so as not to damage the valve and the walls of the foil ball. The air will begin to come out of the balloon on its own, then while lightly pressing on the balloon, continue to release the air until it is flat as a piece of paper. If, nevertheless, the ball retained a small amount of air, use a vacuum cleaner at low power or a hand pump. Then remove the straw from the valve.

3. Storing the foil balloon.

Store foil balloons in a dry, cool place out of the reach of children. If you are going to store several foil balloons, be sure to put paper between them. Otherwise, when the storage temperature rises, the walls of the balls may stick together and be damaged. No need to fold them or try to wrap them in a "tube" - they can crack and tear at the fold.

4. Re-inflate foil balloons.

There are several ways to re-inflate foil balloons. Inflate it with the same cocktail straw with air or order balloon inflation with helium. In the first case, the inflation process is simple, fast and economical. But, he can't fly. In the second case, helium will raise the foil balloon to the ceiling and last 2-3 weeks. You can also buy disposable low-pressure helium cylinders and inflate your own foil balloons.

When inflating a foil balloon with helium, follow the safety instructions. If you have any questions, it is better to contact professionals!