Hat with crochet brim. Scheme

Hat crocheted according to its own pattern "Spring mood".

Author of the work: Kotlyar Svetlana Vyacheslavovna, teacher of MBDOU "Berezovsky kindergarten No. 33 "Arzamas district of the Nizhny Novgorod region.

The master class is designed for middle and older children school age, teachers and parents who have basic crochet skills.
Target: making a headdress.
Purpose: this work can be a gift, used at exhibitions and just serve as a headdress.
Tasks: development fine motor skills hands, development creative thinking.
You will need: yarn Children's whim"red color - 1 hank, a little yellow yarn, hook number 1.5.
Good afternoon I propose to crochet a hat with me for you, your daughter or granddaughter. The hat knits quickly, the knitting technique is very simple. I will try to describe everything in detail in my master class, if you have any questions, write, I will be happy to answer. So, let's begin.
Scheme from 1 to 6 rows (for designations on all schemes, see the scheme of the base of the flower).

Description of work: we collect 6 air loops and close the chain in a ring. 1 row. We knit in a circle 16 columns with a crochet.
2 row. 2 lifting air loops + 1 air loop, 1 double crochet + 1 air loop (alternating to the end of the row).

3 row. 2 chain lifts, 1 double crochet + 1 chain, 2 double crochets + 1 chain.

4 row. 2 lifting air loops, 1 double crochet + 2 air loops, 2 double crochets + 2 air loops.
5 row. 2 lifting chains, 2 double crochets + 2 chains, 3 double crochets + 2 chains.

Next, we knit according to the following pattern. (hat pattern from 6 to 28 row).

Description of work: 6, 7, 8 row. 2 lifting chains, 3 double crochets + 2 chains, 4 double crochets + 2 chains.
Do not forget that starting from the 7th row, shift the pattern to the left (if there is no addition of columns in the row)!

9, 10, 11 row. In each row, we continue to add 1 double crochet, the number of air loops does not change.
The diameter of the bottom of the hat should be equal to the volume of the head: by 3.14.
In our case, this is 16 cm (head volume 50: 3.14 = 15.9 (cm)). If the volume of the head is smaller or larger, then the diameter of the bottom will be smaller or larger, respectively, count!

From the next row, our hat will begin to bend.
12, 13 row. 2 lifting air loops, 7 double crochets + 2 air loops, 8 double crochets + 2 air loops.
14 row. 2 lifting air loops, 6 double crochets + 2 air loops, 7 double crochets + 2 air loops.

15 row. 2 lifting air loops, 6 double crochets + 3 air loops, 7 double crochets + 3 air loops.

16-24 row. 2 lifting air loops, 6 double crochets + 4 air loops, 7 double crochets + 4 air loops.

25, 26, 27 row. 2 lifting chains, 6 double crochets + 5 chain stitches, 7 double crochets + 5 chain stitches.

28 row. Next, we begin to knit the fields for the hat, they are made with single crochets.

We continue to knit the fields, there are no additions of columns in the row.
For our fields, 9 rows were enough for us, if someone wants a larger field, feel free to add rows!
37 row will be the last hat is almost ready.

We shape the hat (this may not be done): dilute the gelatin in water (a tablespoon per glass of water), then pour it into boiling water while stirring.
Immerse the wet hat in the resulting solution, wring out, shape.

We need thread yellow color, we begin to knit a flower. Flower diagram.

We collect a chain of seven air loops, close the chain in a ring.
1 row. We knit 21 double crochets.

2 row. 12 air loops, 2 single crochet (alternate to the end of the row).
It turns out a flower of 7 petals.

3 row. We tie each petal like this: 1 single crochet, 2 double crochets, 6 double crochets, 2 double crochets, 1 single crochet. Between the petals, a single crochet.

The first tier of the flower is finished, we begin to knit the second.
In the second tier we will have five petals.
1 row of the second tier. Each petal consists of 7 air loops, connected to the ring of the 1st tier by a connecting column.

2 row. We tie each petal like this: 1 single crochet, 5 single crochet, 1 single crochet.

The third tier will have three petals.
1 row. Each petal consists of 5 air loops, connected to the ring of the 1st tier by a connecting column.
2 row. We tie each petal like this: 1 single crochet, 4 single crochet, 1 single crochet.

For the middle of the flower, we collect 4 air loops, connect with the ring of the 1st tier.
We tie this petal like this: 1 single crochet, 3 single crochet, 1 single crochet.

Next, we knit the base of the flower. We collect air loops, connect into a ring. 1 row base. 2 lifting air loops + 19 double crochets.

2 row. 2 lifting air loops, 4 air loops + 1 double crochet + 4 air loops.
3, 4, 5 row. Next, we knit according to the following pattern.

The base for the flower is ready.

Next, we connect the base with the flower, that's what happens.

You can leave the flower yellow, I tied the edges of the flower petals with single crochets with red thread, I did not tie the base.

We just have to sew a flower to the hat, sew it on. Here's what we got.
The scheme of the bottom is not complete, there should be another row with an expansion, where the expansion goes through 3 fans. I will try to explain in words, because I can hardly draw better. For the bottom, the rapport of the pattern in height is repeated 4 times, the first time for 6 fans, the second for 12, the third for 18, the fourth for 24, and then it is already knitted without increments, i.e. 24 rapports just for the girth of the head. The expansion comes at the expense of an arch of 3 ch, which is knitted in a row between fans of 7 CCH. (then in the next row, PSSN is knitted into this arch). First, these extras the arches are knitted between each fan, then after 2, then after 3. In words it seems a lot and difficult, in fact everything is very simple, I didn’t even bandage the bottom, from the first time and without any scheme, this extension of the pattern fit well for me
Flowers for decoration are also on the eye. 6 vp close in a ring.
2nd row: *2dc, ch7*, repeat 6 times.
3rd row: each arch of 7 ch. tie * RLS, PSSN, 10 CCH, PSSN, RLS *, SS in the CCH of the previous row.
Tie a flower with a contrasting thread *SS, v.p.*
Panama hat is knitted from chamomile yarn, hook No. 2, head circumference approx. 50cm

After the panama is tied to the desired depth, the row that comes after the fans (3СБН, 5ch) is tied with RLS, then a row of arches of 5 ch is knitted. (2 pieces per 1 pattern repeat). And then the fields according to the scheme of fans. In the base of the fan, she knitted 9 CCHs, in the last row, 3 CCHs connected together was replaced by 2 CCHs together, and then she tied the fans with arches from 3 ch. On the last row of the pattern, she also stretched out a ribbon

Head circumference: for any circumference.
Yarn: "Ivushka" Semyonovskaya yarn (50% cotton, 50% viscose, 430 m/100 g).
Hook: No. 2

Description: Panama crochet for girls

We start knitting a children's panama hat from the crown.
To do this, fold the thread into a ring.
1 row: we tie a ring of thread. 3 lifting air loops, * air loop, double crochet * - repeat 13 times, air loop, connecting loop (we close knitting in a circle). Pull off the ring by pulling on the non-working end of the thread.

We knit according to the scheme a circle to the required diameter.

After we have tied a circle of the required diameter, we knit without increments: * double crochet, air loop * to the required depth. We introduce the hook under the arches from the air loops.

then yarn white color knit 3 rows with single crochets.
Tie the edge of the panama hat with openwork scallops.

The scheme of tying the edge of panama crocheted.

Photo: Panama crochet for girls

The hats are knitted for 5-6 years, for a head circumference of 52-53 cm. Threads 100% cotton, Lily from Yarn Art Turkey. Hook number 1.5.

crochet knitted hats

(Sunday, 01 July 2012 14:31)

Please! Happy to be of service.

#3

Good afternoon Olga! I am writing to you with a big request. Could you knit me a panama hat, approximately like a lilac one in a circumference of 56 cm, but I would like a white one. If you agree, then we will agree on a price and everything else, My phone number is 89213167585, Nadezhda.

#4

Great Panamas!
Eyes open!
Which one to choose for your granddaughter?
Thank you!

#5

Great thank you!
Everything is clear and accessible!

#6

Thank you! Wonderful Panama

#7

Thank you, Panama hats are just wonderful. I want to knit everything for my granddaughter.

#8

thanks for the site

#9

I had no idea that a children's panama can be so clearly decorated! Prospect and respect!

#10

Thank you very much, a great help for us beginners to knit, thank you very much.

#11

very beautiful, real summer in headdresses!!!

#12

And can you see on your site how to decipher the abbreviations? And if not, where is this information?

#13

Good afternoon. Panamas are amazing! But I can’t get a panama hat with rounded fields. Even adding through 5 single crochet fields, the fields turn out to be a wave ((. I knit white with two roses and small round fields.

#14

Good evening, Marina! It all depends on the density of the knitting. Yes, and it is possible that the finished product will need to be slightly starched. Good luck in needlework)

#15

Hello Julia! Abbreviations can be found in any knitting magazine or book. I will try to post them on our website. Many thanks to everyone for the nice feedback. Pamper your daughters and granddaughters with your needlework more often)

#16

In the 3rd panama hat, in the photo, starting from the 7th row, there are always 4 sn, and one embossed, and according to the description in each base, sn. should be 2 s...
Believe photo or description??

#17

Tell me, please, is it necessary in the latest model ( summer hat) to make increments in the openwork part? For some reason it doesn't work as planned...

#18

Hello Dmitry! The description was written by the authors, so it's best to stick to it. And of course, look through your work, if possible, try it on, because all distortions and shortcomings will be noticeable. I wish you success)

#19

Hello, Elena! In the description of the latest model, there are no allowances in the openwork part. If you adhere to the scheme, then you will have, as in the photo, step by step. Maybe you began to knit more tightly, tightening than you started?

#20

How is the embossed column knitted? Tell me please.

#21

Hello Olga! A knitting lesson for a relief column can be viewed on YouTube https://www.youtube.com/watch?v=Rc2GQedfeIs

#22

Good afternoon I stumbled across your site today by accident looking for available descriptions for knitting panama, I'm delighted! everything is clear and easy! will now have something to do in the evenings. My granddaughter is 8 months old, I want to knit a poncho with sleeves by spring (I have a beautiful melange yarn - bright, colored), I can’t find the same descriptions and diagrams, clear and understandable, can you find one?

#23

#24

Thanks a lot for such beauty and detailed explanation, available schemes.

#25

Beanie with relief column... tell me there is he facial aphids purl?

#26

Please tell me, when knitting an openwork lilac panama hat, how to finish the rows (make the transition from one to another) on the bottom and on the openwork part? Confused.

#27

Thanks a lot for detailed description and panama patterns!!! Already knitted a couple for my daughter. I wish you success!

#28

Thanks Maria! It's great that our site helped and you succeeded. Health to you and your family!

Threads - begonia, hook 2.1. 1 skein was enough.
I'll try to write how I knitted (from memory)
Tied a strip of fillet net(4 rows) - in a circle - the bandage turned out like this
Then she attached the thread and knitted the strip on top with a fillet. Tried on my daughter. The holes were large. I tied them with fans, but at the same time I corrected the pattern so that it did not expand, but vice versa
Fields:
When moving to the fields, I tied 1 row of ssn (I always knit 2-3 rows of sbn, but here I didn’t knit it and the hat doesn’t fit so tightly to the head - I did it intentionally so that the hat was freer at sea)
then 3 rows of arches from 5 c. P.
And then fans according to your favorite scheme
Then she tied a double ring of regilin sbn, then with a crustacean step.

Hat “Little Lady”

schematic and description of the side part

The scheme of the bottom and crown on the exhaust gas 49-50 cm.

My yarn

My knitted 13 rows of bottoms:

Up to 13 rows inclusive for all sizes we knit the same way.
* * *
ATTENTION:
When knitting a pattern in those places where we stick the hook into the column, it is advisable to use the "deep" sticking method. The hook must be inserted not under the two upper half-loops of the column, but into the body of the column itself. This method will not allow the pattern to move when we knit with a crown.
* * *
Starting from the 15th row for all sizes, we knit according to the scheme. Rows 15-20 are repeated two more times.
From the 15th-20th they differ only last row. Instead of CH, I knitted it with RLS.
33-38 rows are also knitted according to the scheme.
38th row - RLS in each column.
The fields start from the 39th row.

We finish the TULIA and insert the FIRST regelin equal to the circumference of the head. I did one vein. This is where we complete the work of the RLS. We steam.

We knit FIELDS hats.
In the 39th row we make increases in every 3rd column,
In the 45th row - in every 4th, in the 51st - in every 5th.
The point is that in each row with increases, you need to add 56 CH (7 reports). That is, in the 39th 168/56 \u003d 3, in the 45th (168 + 56) / 56 \u003d 4, etc.

FORTIFICATION OF THE FIELDS.

After the last row of fields is connected, they need to be steamed well.
On a horizontal table surface, the fields should be in the shape of a flat circle.

We take the SECOND regilin (two veins at once) and tie it with RLS. The length of regilin is not measured in advance !!! Just trim off the excess.
We straighten the fields well.
Steaming!
We tie the same row of RLS again. And we tie the last row with a "crustacean step" through a column.
On the plane, the fields should still have the shape of a flat circle.
Once again, steam the fields with an iron through a damp cloth !!!.
To stiffen, I used SALVITOSE, which is used in felting.
Dried on a balloon.

DECORATION.
It must be made removable - on a pin or button.

Daisies are very easy to knit.
Dial a chain of 2 c. n. In the first of them, knit 8 half-columns and close in a circle in the 1st half-column.

When the whole chamomile is ready, tie each petal in succession with connecting posts. This will allow them to keep their shape and not curl up.

For the centers of daisies, we make small pompoms using an ordinary table fork.

We wind the thread on the teeth of the fork. Then we tie with an additional thread in the middle, remove from the fork and tighten the knot. Then fluff and trim. Sew to the middle of the chamomile.

Two daisies are small, and one is slightly larger. For her, the scheme is the same, only for the petals we collect not 7, but 9 c. P.

I made a decoration on a button fastener for bags.
We need a button and a knitted circle - this is what daisies will be sewn to:

Finished:

Attach button to hat

Scheme (only for petals):

Notation: the sketched points on the diagram are the loop that is on the hook; the numbers in brackets are the number of loops that we pull out of the connected column (in order to make it easier to count the loops)

Blind (connecting) loop

I knit from Soso threads (50gr=240m) regular crochet No. 1.5 (without handle)

step by step photo process:
1. In a sliding loop we knit 6 columns without a crochet

tighten the thread, close in a circle.

2. Capturing only the back half of the loops, we knit 11 columns without a crochet (1 stbn in the first half and 2 stbn in the next), we connect in a circle.

Half loops of the smaller circle will be needed for the upper petals.

3. We knit arches for the lower petals: we collect 5 air loops (in. p), skip 3 loops of the circle, fasten to the fourth; repeat 2 more times, fasten the last arch into the loop with which the first arch was knitted.

4. We begin to knit the first lower petal: We collect 4 in. p. If you turn the knitting a little, the back (purl) jumpers will be visible

there is one loop on the hook (filled dot on the diagram), from the purl jumpers we pull out one loop at a time (4 sticks), we pull the last one from under the arch (extreme stick)

There should be 6 loops on the hook

5. Close the row: grab working thread and we knit loops on the hook in pairs (we grabbed the working thread and pulled it through 2 loops, we grabbed the working thread and pulled it through the next 2 loops). We got the first row (connected column)

6. If you turn the knitting a little, the purl jumpers will be visible,

We knit one in. P.; we pull the loops from the wrong jumpers (1 on the hook + 5 from the jumpers + 1 from under the arch = 7 loops).

We close the row in pairs.

7. Next, we begin to cut the loops. In the sixth row, we start knitting with a blind loop (we insert the hook into the first jumper, grab the slave thread and pull it through the loop on the hook). from further jumpers we pull along the loop and the last one from under the arch

We close the row in pairs.

To finish the first lower petal, we knit a blind loop into each purl jumper, and one under the arch

We make one blind loop in the next arch and begin to knit the second lower petal in the same way as the first. After you tie all three arches, it will turn out like this

To go to the upper petals, do 1 c. n insert the hook into the half loop of the small circle and knit a blind loop

On small circle it is necessary to impose 3 arches from 4 c. p (2 arches for the petals and 1 for the core)

8. We dial 5 in. n and knit the first connection. upper lobe column

First top petal:

two petals

We tie the upper petals with single crochets (I laid a thin wire along the contour to keep their shape better). The lower petals were tied with stbn (without wire). It turned out like this

We sew on beads, you can use small beads, and admire

Starching caps

1. We wash the hat in warm water(30-40 degrees). For white hats, I use bleach. washing powder, for colored - powder for colored things.

2. Cooking starch. To do this, pour 2 tablespoons of starch into a bowl and dilute it with 1/2 cup of cold water (to avoid the formation of lumps). Then pour boiling water, about 1 - 1.5 liters, stirring constantly. The mixture should be thick and clear. We leave to cool.

3. Thoroughly starch the washed caps, wring out (without twisting), removing excess starch.

4. For drying hats, I use ordinary balloons, after inflating them to the desired size.

5. In the process of drying, I periodically give the fields desired shape, I iron the fields of openwork hats through a layer of fabric.

MORE HATS AND FLOWERS FOR THEM WITH SCHEMES

click on the picture to enlarge

Who would have thought that you can crochet a hat! Despite the imaginary complexity, even beginners can do it within one day. This is primordial women's accessory, therefore, in our article we will consider various ways knitting hats for girls and little girls who do not want to be out of fashion.

Crochet photo of women's hats

Women's hats, knitted independently, look incredibly elegant. With such a headdress, you definitely will not go unnoticed. Look at the photo finished works from professional craftsmen, perhaps, very soon you will become the owner of such an original and cute hat.

Children's options are no less beautiful. Headdresses of little fashionistas can be decorated as you like. Pineapples, violets, roses, daisies and berries are ideal.

Master class and description of crochet hats

In childhood, many girls were jealous of their dolls, because they had such beautiful hats. Now you can make your dream come true and become the owner of a trendy and modern headdress.

Our master class is dedicated to the creation of a small children's model with improvised fields and a satin ribbon as an additional decoration. openwork knitting makes the product airy and soft - ideal in summer season.

To get started, select suitable color thread. You can take any patterns, but we suggest using ours if you do not yet have experience in knitting such products. Our description will help you understand if something is not clear.

The amount of yarn depends on the size. But, given that we are knitting a model for a girl, 100 g of cotton threads will be enough for you. To work, use hook number 2.

At the very beginning, you need to connect a simple chain from air loops. Attach it to the circle. The next row consists of three lifting loops and 30 columns with crochets. Then again you need to make a rise, and then knit, alternating two air loops and one double crochet. In the third row there will already be 44 double crochets.

Now take a look at the diagram. It shows how to knit further. Just follow the instructions and soon you will be able to enjoy the beautiful pattern. You should end up with a large dome with connected openwork petals. It must be carefully starched and turn the fields outward. Then you need to pass satin ribbon in lace and tie it beautiful bow. This completes the work, and you can already show off a brand new hat in front of your girlfriends.

We create a crochet hat with large fields: diagram and video

The hat in the previous master class has very small fields. If you like a model with large edges, you will have to use wire frame. The fact is that starch will not master gravity knitted pattern, and the margins can quickly drop, and the product itself will lose its appearance.

For knitting, you will need white cotton yarn, at least 150 g. Work begins with 6 air loops, which are connected into a ring. Knit the next rows according to the pattern shown below.

Once the hat is ready, attach the wire frame to it, giving it the right shape. It would be desirable to additionally starch the product and put it on the form.

Another interesting lesson offered on video. You don't need a pattern to make this hat. Its author comes up with patterns on his own. Just listen to the recommendations and see how to knit a hat correctly. beauty finished product can be enjoyed after a few hours of casual work.

Photo of hats in retro style, with large brim and lace

Women's hat can be done in any form. IN Lately products in retro style are in special demand. We offer several options for hats of this type.

IN summer time you need to protect your face from the sun. This will help you beautiful hat with large fields. In it you will be like a real English lady at the Queen's reception.

Exquisite lace is the main decoration of the headdress for the summer. See the best examples of such models for inspiration.

Crochet hat video

Each of the mothers will be interested to know how a baby hat is knitted. We have a special video tutorial. It will show the process of making a beautiful model in the style of "Athena", decorated with bright colors. Little ones love these accessories.

To work, you will need cotton threads and hook number 2. The video uses white and lime shades of yarn, but you can replace them with any other. This model looks gorgeous in the color "Turquoise", "Fuchsia", "Rosemary". If you already have experience in crocheting, the work will take no more than two hours. Carefully watch how the process of creating a hat takes place in the video: