How to crochet a beautiful hat for a boy. Crochet hat for a boy: we insulate the baby in a cold season. Let's analyze the main options for decorating the cap with appliques

You need: yarn " Children's whim"(60% wool, 40% PAN, 225 m / 50 g) - 50 g of orange, the rest of yellow, brown, pink flowers, hook number 2, 3 buttons.

Knit the base of the cap orange thread... Dial a chain of 5 air. etc., close in a ring, knit 12 tbsp into the ring. s / n. Next, knit 9 rows in a circle, evenly adding 12 tbsp in each row. Then knit without adding to the desired depth of the cap. Leave 11-12 cm for the front, on the remaining loops, knit 2 more rows of st. s / n. Tie the ears of the cap on the sides according to the scheme 1. Tie the edge of the cap with 2 rows of st. b / n orange thread, ears - 1 near st. b / n brown thread.

Tie the tiger's face according to scheme 2, tie part 1 next to art. b / n brown thread. Sew the detail onto the cap, placing a padding polyester under it for volume. Knit the nose according to pattern 3 until the width of the nose is 4 cm, then without adding another 5-6 rows. Tie the ears (4 parts) according to scheme 4, with 2 parts done with orange thread, 2 parts - in the middle with yellow, the outer row - with orange thread. Place one piece on top of another, tie 1 next to st. b / n. Tie the strips with brown thread: central - according to scheme 5 and 2 side - according to scheme 6. Sew on the details as shown in the photo, wash the eyes-buttons. Sew a buttonhole, sew on a button.

Patterns for knitting a hat

Symbols

Summer months bring joy to both adults and children. You can spend whole days outside, blissful under the warm sun. But the influence of the daytime heavenly body is not always useful, so mothers begin to think about how to close the baby's head. Prolonged exposure to the rays threatens undesirable consequences- from deterioration of health to sunstroke... Cap for a boy with a crochet hook for the summer, knitted caring mom, will save the baby from the troubles of summer days.

The headpiece is knitted easily and simply, and a novice craftswoman will also cope with it. You can knit several caps - for each outfit.

We knit a simple crochet cap for a boy for the summer with our own hands

Not everyone is ready to watch knitting videos, preferring them verbal description models. The diagram for the description will make it clear.

Consider how to tie the most plain cap for boy.

First of all, you should focus on yarn. Best yarn- cotton. Products from natural material they let the air pass well, the child will not be hot in them.

1) To begin with, a chain of air loops is typed. Then it closes in a ring, and the product continues to be knitted from top to bottom.

2) In the first row, three loops are additionally recruited for lifting. Then the row is knitted with double crochets. The hook is inserted into the center of the ring from the air loops. The row ends with a connecting post.

3) Subsequently, the product is knitted according to the scheme. Rows 12-19 are similar.

4) The next 20th row consists of double crochets, each of which is performed on the double crochet and air loop of the previous row.

5) In the 21st and 22nd rows, the product is processed around the perimeter with single crochets.

6) To make a tie, 32 air loops are recruited in the 23rd row. Hinges 31 and 32 are lifting loops. On the remaining 30 loops, a row of single crochet stitches is knitted. Then, continuing to knit in a circle, before reaching the end of the row of 15 loops, the second stitch is knitted. Having made the last single crochet for the tie, a connecting post is made into the loop of the 22nd row. The base for the cap is ready!

7) The visor is made separately from the cap, then it is attached to it with the help of posts.

Knitting starts with a set of 27 stitches. In the presented diagram, the designations are adopted: columns without a crochet are shown with crosses, ticks with a cross - increments. An increase means knitting two columns in one loop of the base. To make the visor stiff, you can add a thin line to the thread.

The "marine" theme is becoming the most relevant in summer time... So why not knit a cap for the boy in nautical style.

Unlike previous model this product requires yarn of two colors, it can be standard blue and white. But no one forbids the use of others.

1) The headpiece is knitted from above. The beginning is standard - a chain of air loops (5 pcs.), Closed into a ring with a connecting loop.

2) The following rows are performed with single crochet in a circle. To add, you should make an increase in each loop, that is, knit two single crochets from one loop of the previous row. To top part the cap was flat and did not bend, the addition of loops is performed according to the rule:

  • in the 1st and 2nd rows, an increase is made in each loop;
  • in the 3rd row, an increase every three loops;
  • in the 4th row, an increase every four loops;
  • starting from the 5th row, the increase is done in random order.

The loops are added until a circle with a diameter of 17 cm is knitted (for a boy 4–5 years old).

To make the cap match nautical theme, you need to alternate rows: 2 rows of blue yarn, 2 - white. The last loop of the row of each color is the connecting post, the beginning of the row of the new color is the air loop.

3) To knit the side walls of the base of the cap, the loops are reduced. To reduce the number of loops in a row, you need to skip one of the loops of the previous row, that is, just do not knit it. It is enough to decrease one loop in each row. Rows also continue with single crochet "nautical stripes". You need to finish the cap with yarn of the same color, knitting it 5-6 rows.

4) The visor will immediately attach to the base. Having determined the loop corresponding to the middle of the cap, 10 loops retreat from it to the right. From this point continue to knit as follows: 4 single crochet, 4 single crochet, 4 single crochet, 4 single crochet, 4 single crochet, connecting loop.

5) The second row of the visor is performed with single crochets, at the end - a connecting post.

6) The next 3rd row is knitted in the same way as the 1st (see item 4), and the next - similarly to the 2nd (see item 5).

7) The final stage- cap decoration. For this, a strip of white yarn and a "steering wheel" are knitted. Decorative elements sewn to the finished cap

Let's analyze the main options for decorating the cap with appliques

To make a cap for a boy more elegant, it is decorated with appliqués or decorative buttons.

Related videos

Based on this crochet hat for a boy, it is easiest to understand the principle of knitting hats for men and adolescents with a convex geometric pattern... They can be very diverse, these hats with convex columns.

They not only look good, but they also fit perfectly. male head... They look moderately brutal, no matter how old the man is.

On the baby, she looks cute and "like a man" at the same time. Knitted hat for a boy crochet is given with a description on two year old child.

Description of knitting a hat


Materials and tools

  • Yarn (55% cotton and 45% polyacryl, 50 g / 160m) - 1.5 skeins
  • hook number 3

The hat is knitted with convex and concave double crochets and half double crochets. The last row knit with single crochet.

OG - 47 cm, the diameter of the bottom should be 47 cm x 3.14 p (according to the loop sample = 15 cm).

It is better to take 1 cm less for a better fit on the head, for a total of 14 cm.
Knitting goes in a circle, we close each row with a connecting column to the top of the first column of the row. We always start the next row with three lifting air loops.

Symbols in the text

  • embossed column with a front crochet - l.r.ssn
  • embossed column with a crochet purl - out of r.ssn
  • half-crochet (like a double crochet, but we knit all three loops on the hook in one step) - p / ssn

Row explanations


The bottom of the cap
  • 1 row: we close 5 air loops in a ring, we knit 8 double crochets into it. Next, we will add 8 loops in each row to expand the circle.
  • 2 row: in each column we knit 2 liters of r.ssn = 16 loops.
  • 3rd row: * 1 l.r.ssn; we knit 2 l.r.ssn from one * repeat from * to * seven more times = 24 loops.
  • 4th row: * 2 l.r.ssn; we knit 2 l.r.ssn from one * repeat from * to * seven more times = 32 loops.
  • 5 row: * 3 l.r.ssn; we knit 2 l. r. sc from one * repeat from * to * seven more times = 40 loops.
  • 6 row: * 4 l.r.ssn; we knit 2 l. ssn from one * repeat from * to * seven more times = 48 loops.
  • 7 row: * 5 l.r.ssn; we knit 2 l. ssn from one * repeat from * to * seven more times = 56 loops.

At this stage, the bottom diameter was 8 cm. We have 8 wedges, each containing 7 loops from the front relief columns. Next, we do the expansion by knitting wedges between the stripes of embossed columns.

  • 8 row: * 7 l.r.ssn; 1 p / ssn (it is tied out of the jumper between the front embossed columns) * repeat from * to * seven more times = 64 loops.
  • 9 row: * 7 l.r.ssn; 1 l.r.ssn (we tie it out of the jumper between the previous l.r.ssn and p / ssn); 1 p / ssn * repeat from * to * seven more times = 72 loops.
  • 10 row: * 7 l.r.ssn; 1 p / ssn (it is tied from the jumper between the front relief columns); 1 l. Ssn; 1 p / ssn * repeat from * to * seven more times = 80 loops.
  • 11 row: * 7 l.r.ssn; 2 p / ssn (the first according to the loops of the previous row, the second from the jumper between p / ssn and l.r.ssn); 1 l. Ssn; 1 p / ssn * repeat from * to * seven more times = 88 loops.

At this stage, the bottom diameter will be 12 cm.

Additional explanations. According to the rule of knitting hats, to get the shape of the cap we need, we need to make increments further through the row.

Accordingly, we will not make any increments in the next row, and here it will appear the new kind a column due to which a relief strip is formed in the wedges.


  • 12 row: * 11 out of r.ssn; 7 l. Ssn; 2 int.r.ssn; 1 l. Ssn; 1 out of r.ssn * repeat from * to * three more times = 88 loops.
    This row forms our transverse stripes in the wedges.
    The next row will be incremental.
  • 13 row: * 7 l.r.ssn; 3 p / ssn (2 according to the loops, the third of the jumper between p / ssn and l.r.ssn); 1 l. Ssn; 1 p / ssn * repeat from * to * seven more times = 96 loops.

At this point, the diameter of the bottom has reached the required 14 cm. And then we knit straight without any increments.

Additional explanations. The bottom size can be varied by thread thickness, hook number, knitting density, and by the amount of increments.

  • 14 row: * 7 l.r.ssn; 3 outl. Ssn; 1 l. Ssn; 13 out of r.ssn * repeat from * to * three more times.
    We knit from row 15 to row 18 in the same way as row 14.
  • 19 row: * 7 l.r.ssn; 3 p / ssn; 1 l. Ssn; 1 p / ssn * repeat from * to * seven more times.
  • We knit 20 and 21 similarly to row 19.
  • 22 row: * 12 out of r.ssn; 7 l. Ssn; 3 outl. Ssn; 1 l. Ssn; 1 out.r.ssn * repeat from * to * three more times.
  • 23 row: we knit in the same way as the 19 row.
  • From 24 to 28 we knit in the same way as row 14.
  • We knit the 29th row in the same way as the 19th row.
  • 30 row - we make decreases so that the cap fits more tightly to the head near the face. We knit this row in the same way as in row 19, but where 3 p / ssn we make decreases, knitting 2 p / ssn together. Thus, we subtract 8 loops around the circumference = 88 loops.
  • We knit 31 row in the same way as row 12.
  • 32 row - last, knit with single crochet.

You can continue as shown if you need more depth for the header. Description given by author Julia Dorokhova.

Crochet hats for men


By the same principle as in the description above, a man's hat is crocheted. Her main advantage is that she sits on her head like a glove. And it does not look like a banal "stocking" (if not to put it more precisely and more roughly), which men do not like so much.

Men are hard to please, even if you think a hat is great and looks good for warmth, they may have a different opinion. Try to show them this model. Perhaps they will like such a hat, and you will already know how to knit it.

A warm crochet hat for a boy, the scheme of which will be proposed below, in winter period- enough practical thing... Hats for children are knitted with ears, which reliably protect the baby from hypothermia, colds and otitis media. You can knit a hat in several ways, and a huge number of models presented on the Internet makes it possible to create an original and stylish little thing for your child.

Warm winter hat crochet boy knits from woolen or semi-woolen threads with a dense knit. You can knit it from an old sweater that has become small or just out of fashion. Loose and washed threads will regain their original qualities and give life to a new thing.

Today we will offer our readers two not quite conventional models, from which the baby will surely be delighted. Any boy will wear such a hat with pleasure.

Crochet hat for a boy - scheme "Shrek"

To create this model you will need:

    Green woolen or semi-woolen yarn.

    Hook number 2.5.

    Sintepon.

The hat is knitted round.

    We collect 3 air loops and close them with a ring.

    We make 6 tbsp into this ring. without a crochet.

    We rise with 2 air loops on new row and knit in each loop 2 tbsp. without a crochet. We take into account that the lifting loops are already one column.

    In each new row, we make a uniform increase in loops, taking into account the head circumference.

    When the required volume is reached, we continue to knit without increments.

    We tie ears on the sides of the hat.

Now we need to tie horns to our Shrek. We make 4 air loops and close them with one half-column. Again we knit 6 tbsp. without a crochet, and in the next row we multiply them by 2.

In the third row, we must add 6 more columns, that is, through one loop. Then we knit 3 rows without changes, after which we begin to decrease to 12 columns.

We knit 10 rows, stuff the synthetic winterizer into the resulting horns and sew on the cap from above at a distance of 15 cm from each other. Crochet winter hat for a boy is ready.

Crochet hat with earflaps for a boy - "Kitten" model


To create this model, we need yarn of three colors (gray, black, white) - only 100 gr. and hook number 6. We will knit a hat with single crochet.

We knit an air chain of 40 loops and connect both ends with a column. We will work in a circle. We knit the seventh and eighth loops together, again we count to the seventh and again we knit together. There should be 35 stitches at the end of the row.

On the next row, decreases begin from the 6th loop and so on to the end. At the exit, 30 stitches remain. In the next rows, we act in the same way until 10 loops remain. We stretch through them working thread, we bring it inside the cap and tighten it tightly.

    We knit the nose and eyes.

    Let's start forming cat ears... We knit the ears in rows from 15 loops and gradually reduce the loops.

    We tie the ears of the hat itself to the bottom edge.

    We tie the lower contour of the product and the cat's ears with a black edging.

    We make antennae for the muzzle.

A warm and funny hat for the baby is ready, let him be warm and joyful!

Unlike girls, boys dress more discreetly, without glitz or glamor. But, this does not prevent them from looking fashionable and stylish, it is enough to choose the right clothes, shoes, accessories. One of these items is a crocheted hat for a boy. Consider the detailed mk.

Hat with ears "Kitten" on the needles

A small neat hat for the youngest fashionista. It knits easily, so novice needlewomen can safely take on it.

Consider the mic of two versions: a) 3-6 months; b) 1 year.

For work you need to prepare:

  • yarn;
  • knitting needles number 3.5;
  • needle for wool

Cast on a) 43 sts - b) 47 sts and knit face stitch until the canvas reaches a) 17 cm - b) 18 cm.In the next row, close the loops. I knit the second part in the same way.

Now let's move on to the assembly. The threads must be removed. We embroider the muzzle with a "loop" seam, and the antennae - with a stalk.

Fold the two parts facing each other and perform side seams and then the top seam. To form the little wagons, weave 2 braids 20 cm long and sew them to the edges of the cap. To decorate the ears, we pierce both thicknesses of the cap basting stitch("Forward needle")

Knit a hat with Kitty ears: video master class

Knitted hats for a boy crochet "Bear"

This crochet hat for a boy is original and very unusual. The knitting technique does not require any special skills. Don't believe me? See next mk.

To crochet a hat you need to prepare:

0-3 months - the product is designed for a head girth up to 35 cm;

3-6 months - head circumference 35-42.5 cm;

6-12 months - exhaust gas 40-47.5 cm.

To obtain larger size caps, you need to make additional rows.

Knitting density- 2VP for 2 columns = 2.5 sq. cm.

We will crochet in a circle. For convenience, the beginning of each row can be marked with a contrasting thread or marker. Also, each new row we raise 1 CCH.

The direction of knitting is from top to bottom. The description of the scheme for calculating the loops and the body of the cap is given below.

1r. - we make an adjustable ring from 5 VP;

2p. - in each column we perform 2 PRS (it should turn out to be 10 pet.);

3p. - alternate 1 sc in the first loop with 2 sc in the second loop before. row (15 pet.);

4p. - alternate 2 sc in the first 2 pet. prev. rows with 2 sc in the second 2 pet. prev. row (20 pet.)

5r. - alternate 1 sc in the first 3 pet. prev. rows with 2 sc in every 4th pet. prev. rows (in total, you should get 25 pet).

Size 0-6 months
We carry out 1 sc in each loop (25 pet.) Finish.

Size 3-6 months / 6-12 months
6p. - We carry out 1СБН in the first 4 loops and 4 СБН in the 5th loop. Repeat until we get 30 stitches in the row.

For solution 3-6 months.
7-15 p. - In each loop, knit 1 RLS and complete the work.

For solution 6-12 months.
7r. - In the first 5 loops we do 1СБН, and in the 6th - 2 СБН. We repeat to the end of the row. The result should be 35 pet.

8-19 rubles. - 1 sc in each loop and finish the job.

Add rows to increase the size.

We turn to knitting ears.
1r. - 1VP, 10 SBN, 1VP turn (11 loop)

2p. - 9 PRS, turn (10 pet.);
3p. - 8 sc, turn (9 pet.);
4p. - 7 sc, turn (8 pet.);
5r. - 6 sc, turn (7 pet.)

6p. - 5 sc, turn (6 pet.);
7r. - 4 sc, turn (5pet);
8 rub. - 3 RLS, we finish work.

We perform the second ear in the same way, after which we take the needle and make a basting stitch along the edging. Next, we pull together the eyelet and sew to the main product. We do the same with the second ear.

Two VP chains will serve as strings that will need to be sewn to the ends of the cap. Optionally, their bottom edges can be decorated with pompoms. That's it, a crocheted hat with ears for a boy is ready.

Crochet Monkey hat: video MK

How to knit an owlet hat

The image of this headdress is taken from the cartoon "Smeshariki", beloved by kids. To make a winter hat, you can sew a thin insulation cap inside.

To knit a hat owlet you need to prepare:

  • yarn different colors(lilac, orange, white, black, red);
  • hook with the corresponding number;
  • needle;
  • scissors;

The size of the product is designed for a newborn baby. If an adult needs a hat, then the number of surplus rows must be increased.

We will start knitting with a hat. We take the thread lilac, we make a sliding ring, and in it we carry out 12 CCHs

With the help of the increase, in the second row we increase the number of loops to 24. In 3-4 rows, the increase will be performed through 1 column, and in the 5th - through every three columns. This will allow us to expand the canvas to the desired size.

We also need to knit 9-10 rows without increments and the hat will be ready

Ears with tassels, crochet... With lilac yarn, we again make a sliding ring and we carry out 6 columns into it, but already without a crochet.

In the 2nd row, add 3 columns.

We knit the third without changes.

4-6 p. - add 3 columns each.

7r. - add 2 single crochets.

We make brushes for each ear. Several strands of yarn, pull through the upper loop of the eyelet, tie and level with scissors

Moving on to the eyes. We make a sliding ring with white yarn, and then we carry out 12 double crochets into it.
2p. - we double the number of loops;
3p. - through every second loop we knit 2 loops.

For the pupils, we take a black thread and perform 12 CCHs in a sliding loop.

Our beak will be orange. We make 6 columns into the sliding loop, after which, in the next 3 rows, add 3 columns

Next, we move on to the orange-red cap for Sovunya. We collect 30 VP with a red thread and close the chain into a ring. We knit two rows of CCH and change the color of the thread to orange. In the next 2 rows, we subtract 6 columns and return to the red thread, which we complete the work with. Decorate the top of the hat with a fluffy pom-pom.