Simple origami rooster assembly scheme. Origami rooster Scheme is simple. Roosters from fetra

14.04.2019

Origami Rooster is done like this:

1. To begin with, perform steps 1-3 base model origami duck. Further, it is equally runting inside both upper inclined edges, leaving a small gap between them.

2. Sogge the figure in half vertically.

3. The point line is indicated by the edges of the valves, resulting in step 1. They should be tackled through the external layers of paper.

4. Sliding the layers of paper on the right side, then turn the entire bottom edge inside out until you feel the resistance of the internal valves. New folds are formed in places of contact with valves. Make sure the item is correct (see Figure 5) and make hard folds.

5. Turn a little, the model counterclockwise and stand it as shown in Figure 6.

6. For the tail, we will warm the right top, as shown in the figure (see the point line).

7. We will make a second fold smaller, but the same form.

8. Warring the bends made at stages 6 and 7.

9. Sliding paper layers on the right side upper region inside out and seemed to be between them, using folds made at step 7.

10. Upte the tip of the tail inside out, using the folds made at step 8.

11. For the head, bent the left top in the transverse direction from left to right, as shown in the figure. The point line is indicated by the position that this part should occupy.

12. For the ridge and beak, we run the tip of the same top to the left.

In the world of needlework there are a lot of ideas, the implementation of which allows you to make simple crafts on the New Year Or another holiday to please yourself and your loved ones. Modular origami For beginners - it is very interesting activity. A person can learn how to create small figures from the modules pretty quickly, it is easy. On the Internet are represented simple schemes, whose description will allow you to make a rooster from paper, temple, flower, etc.

Modular origami for beginners is a very interesting occupation.

Step-by-step instruction:

There is an option to purchase in the office of the Office of a separate paper for modular origami. But to build a rooster and ordinary colored paperTrue, she is thinner. It is recommended to use yellow material.
Square sheet of paper is bent in half. The resulting side strip must be bent and cut along the fold line.
The paper is then folded in half, forming a rectangle.
It is important to ensure that the upper and lower edge coincided. The fold line should be stroke.
After that, the sheet unfolds. The square is re-folded, only this time on the other side.
Paper folds vertically, that is, left to right.
After the fold is made, the leaf unfolds. If everything was done correctly, then in the center of the sheet there should be a cross.
The upper left corner is applied to the lower left corner. Then the fold is made. The action is repeated, but only on the other side.
The right side of the paper with a fold is bended to the center. The resulting square folds into the rhombus. In this method, the triangular sheet forms should not be obtained. If the figures of triangles were formed - this means that the needlework incorrectly followed the plan.
The corners of the figure must be collected by the middle. The top corner is adjusted to itself. Next is made fold. Three other folds are flexing.
The top corner of the square rises along the fold line up. Two other folds bend inside.
The top edges of the sheet are folded inside. You need to straighten them.
The exterior edges of the separated diamond are folded in the center. The right fold is bent to the left.

On the last stage The figure turns over, and the upper angle of the lower layer folds to the upper corner.

Gallery: Modular origami (25 photos)

Modular origami for beginners: Swan (video)

Christmas tree with a modular origami: step-by-step instructions

Such a volume of creation as paper Christmas treecan decorate paintings, stands or wooden decorative boards.

So, detailed technicians:

The tree must be made of green paper. You can use both color and ordinary paper. If the choice fell on the usual one, then the paints should be used to acquire a green tint.
Collect the Christmas tree follows from a square sheet. The fifth lines are made in height, width and diagonals. Paper unfolds.
Then the basic model of the figure is a triangle. The fold line is planned in the figure. Right side turns away to her.
Next, you should use the folding line so that the right angle of the figure is in the center of the base of the triangle.
All angles wrap up.
Then it is necessary to use scissors so that the Christmas tree then become volumetric. It should be done by three cuts with the right and on the left side.

Such a volumetric creation as a paper Christmas tree, can decorate paintings, stands or wooden decorative boards

At the last stage, the segments obtained are strung out to the sides.

Little Figure Man: Simple Description and Scheme

For each detail of the little man, you can use paper different colors, for example, top to make yellow, and pants are blue. But to simplify the task it is better to use one-color material. Pencil for creating a little man is not needed.

So, the square material bends in half, then the side angles of the figure are bent.
In the bottom of the sheet should be made fold-zipper. The angle is lowered at the top of the top. Then the figure turns over.
The angle is slightly flex. No need to bend it too much, quite slightly chant the fold line.
After that, it is necessary to neatly flatter the "pockets" of the resulting figure, bending the resulting triangle.
One half of the product bends back.
The corner stretches up, the paper is pulled out. The elongated figure is an almost ready little man.
After pulling out the figure up, only the "nose" of the triangle should be visible.
The angle is flexible inside, and the head of the man is lifted up.
The remaining upper corners bend inside on each side.

For each detail of the little man, you can use paper of different colors.

At the end of the hand and the head of the little man should be glued to the body.

Tips for those engaged in modular origami

By connecting several origami thread, you can decorate this room. Ideas Mass! For example, you can hang the craft on the nail at the door. It looks very beautiful, especially if the origami is multicolored.
Newbie wishing to improve your skill may experiment with different materials and flowers.
Return origami through the thread is needed very carefully so as not to damage the paper.
In such a work, it is recommended to use thin paper designed specifically for modular origami. Why? It is thinner, it's easy to work with it. Although people who are very intensely folded paper, can break it, but if you do everything carefully, then the craft is obtained very beautiful.
Origami is excellent gift. By the new year, you can make a Christmas tree, and by February 23 - a tank.
There is an alternative material for creating modular origami - this is a foil. From her crafts, it turns out more durable, besides, they are brilliant.
To follow environmental Plan. Conservation ambient, You can use not new, but recycled paper.
If a person plans to give origami, the last step of its completion is recommended not to do in advance, but before serving. So the exercise will not look "Help".

By connecting a thread of several origami, you can decorate this room

To create a beautiful craft, the main thing is to make smooth edges. That is why it is not recommended to use the material bad quality. If the leaf is adapted, then the elegant origami will not work.

How to make a modular origami in the form of a heart?

A piece of paper is taken square form. The color side is turned face. Left top corner bends to the center. The edges should be exactly attached to each other.
The action is repeated with another angle. As a result, there should be several fold lines. You do not need to deploy the leaf after that.
The lower part of the material is folded to the center.
Then the leaf is completely straightened and turned over to the other side. If before that everything was done correctly, then in the center of the sheet there should be convexity.
Next is made horizontal fold.
The sheet is reversal.
Two edges of paper bend to the center. The edges of the figures should come in touch.

Such a gift is very romantic

What needs to be prepared for work?

Paper. For modular origami, a specific thin paper. But if this is not found, you can use normal Material. The main thing is that it is square form.
Flat surface. It is convenient to work on a flat surface on which the paper will be smoothly lying.
Line. A ruler is used to make bends of a flat type. However, it is not necessary to use it.

Strawberry paper for beginners (video)

If you correctly follow the instructions, you can make the most beautiful modular origami with your own hands. The main thing is to have a desire, and then you can create even the most complex paper products.

Despite its simplicity and low cost, paper is one of the most interesting materials For crafts and creativity, because of it you can make as many different beautiful things: appliques, flat and volume figures In the Origami technique, the whole paintings in the Quilling technique are luxurious panels and a lot of other.

In addition, there are so many paper varieties and such a diverse color scheme that it will certainly be able to find their embodiment with it. creative ideas And ideas.

Try to start with the manufacture of not very complex products. For example, with any variation of the image of the cockerel.

How can he be?

Many master classes are dedicated to the creation of a cockerel from paper with their own hands. You can make it the most different waysDepending on which image is expected, as well as the purpose of manufacturing this product:

if the child needs an exercise in the kindergarten, then help him make appliqué. To do this, you just need to print the template, cut its parts, and then make the same items with them, but with colored paper. Get all the parts to the cardboard to get a cockerel. Suppliate Appliqué - Dorisite or also make out of paper grass and flowers, sunny sky, branches for the rooster, you can create even a whole family by adding a chicken and chickens to it. It turns out very beautiful if you take a dense, shiny or velvet paper. Can be decorated with sparkles;

applique may be experimental - for example, try on the workpiece of the cock the cocks and corrugated paper, but not just like that. If you are glad to color corrugated paper In a bowl with water and rinse it a bit there, the water will turn around, and the paper will acquire interesting and divorces - this will add the appliques of originality and make the craft unique;

another interesting option Applications with your own hands - make a lot of blanks from the children's palms circled on paper, then cut them and chaotic to glue a cock-tooching, adding some more items;

with small children it is easy to make with their own hands and a surround cockerel who will become a wonderful character in the production of a puppet paper theater and come in handy for the dramatization of various fairy tales. To make it easily, you will also need a template from which it will be necessary to cut the items. The basis and torso of such a cockerel will serve as a cone (it must be glued), and the head in the form of a cylinder will attaches. Rectangles bend along the bend lines, and form the wings, tail, scallop and beak from the strips. Stick all the details (see the assembly scheme);

it's even easier to make your own figurine from paper cone - Cut and glue a cone from colored paper, and stick to it with eyes, a keyboard (folded triangle), scallop, auxilies and a tail from a variety of stripes, as well as legs from the harmonica;

very peculiar, crafts in the technique of simple and modular origami, the rooster will be described slightly below;

in the technique of paper plastic, you can also perform interesting hands modular figures - To do this, you will need a scheme and a template, according to which you need to cut and glue the parts, and then simulate a cock figurine;

if you have at least minimal skills in the killing technique, you can create whole pictures and panels. The easiest way is to use ready template Birds on which you will need to simply attach multicolored forms. For the manufacture of more complex products you can watch a special master class. Some masters even combine various techniques, for example, the torso and the head of the rooster do from paper masses or papier-mâché, and the tail, scallop, wings and other details - in the program quilling (element "droplet");

looking like quilling and the manufacture of a cockerel from corrugated pipes, twisted from multi-colored corrugated paper;

beautiful and original figures can be made from the same papier-mache and even from paper trays for eggs.

Make a cockerel in the Origami technique

Beautiful cockerel is easy enough after some manipulations with a square sheet of paper. Note the folds of folds and fold the sheet diagonally. Then bend the corners of the inflection lines.
Approximately half of the paper figurines flex back and make the bend on both sides.
Get out the top corner up and inside, and then turn the fold.
Then the upper corner is flexible to the right and again inside, and the fold is first inside and back, and then inside and forth. After that, the angles bend from both sides inside the figures.

For the manufacture of modular Petushka It will take first to make individual modules for it (about four hundred pieces), and then combine them together.

Mastery Cockerel made of paper trays for eggs

To make the original and beautiful cocks made of paper trays for eggs, take the tray, disassemble it on the cells and cut out, as if separate tulip.
Then glue with each other using fine paper.
Cut the rooster from the tray and make the beak.
Prepare the blanks from the cardboard and begin to glue the feathers from small to large.
True Petushka Make this: balloon Puck the scraps of the newspaper and white paper. When it gets free, cut it into two parts (they should not be equal).
Take the one that more and insert smaller into it. Start collecting a cockerel, attaching wings, tail, paws and muffin with all the details.
Krave the product Pearl acrylic paints, changing the colors and shades, so that the rooster turned out to be bright and motley.
So that it and stood well and stood, you can attach it to the support, and the upgrade is upgraded painted eggs or other decor.

Cockerel in the Origami technique step by step with photos

Tools and materials

1. Billets for figurines (9x9 cm) and tail (8x5 cm) from thin but rigid colored paper. Carved details - a beard, scallop, wings.

2. Strip for the base (2x6 cm) of dense white paper.

3. PVA glue, brush for glue, glue, cloth, scissors, felt-tip.

Procedure for performing work

1. Fold the square in half diagonally.

2. Return the workpiece to its original position.

3. Two sides, emerging from one corner, fold to midline corner.

4. Fold the workpiece in half.

5. For a more easy subsequent indemnial angle inside the workpiece, double folding the upper sharp arrow angle first one way, then on the same fold line - in the opposite direction.

6. Print (press) This angle inside and slightly pull the front - turned out to be a beak.

7. Remove the bottom corner of the workpiece upstairs, it is the base of the tail.

8. Cut the narrow strips on the billet for the tail.

9. Screw the resulting fringe on the pencil: one strip in one direction, the other is in the opposite.

10. Enclose tail, wings, scallops and a beard to a cock.

11. Perform the foundation by gluing a strip (2x6 cm) ring.

12. Sharpen the cock on the basis.

DIY, made by their own hands, especially origami, are often popular among the needlewomen, especially beginners. That is why we suggest creating beautiful craft Rooster from origami modules with their own hands.

Paper rooschok

We propose not to lose the slightest second and start creating a beautiful and bright rooster from origami modules, this master class This will help.

In order to make a contrast rooster, you will need to take bright paper orange, red and yellow flowers. As a basis was taken black. Also do not forget the second glue and PVA glue.

Modules make 1/32 size. We all needed about 900 modules, namely, 386 modules were used for the body, 150 on the head with a beard and neck, at forty modules for each leg, 245 modules were taken to the tail for the rooster.

First step, we need to assemble the body for the rooster. To do this, score twenty modules in a circle. In the first row we take 8 yellow, and the rest is black modules. Before the fifth row (inclusive), the amount of yellow blanks is reduced by 1, the number of black modules is growing at 1. In the sixth and seventh row, add yellow modules (one by one), we remove black. In the eighth row, you first pick up five yellow modules (center cockerel), then one brown module and five black.

Rear remains free six corners. In this place we will incur in the future tail.

In the next row, we recruit six yellow, one brown module and five black. Please note that the last black modules must only be put on one corner.

At this stage, a strip is added orange color. It must be introduced in such a sequence: in the tenth row 5 yellow, then one orange module, after brown and four black blanks. In the following layer, add one yellow module. In 12 rows, we recruit 5 yellow, 2 orange, 1 brown, 3 black modules from each moan. Then add one yellow module in the next circle.

In the fourteenth row we wear five yellow, then we skip two corners on each side, after which there are two orange, then 1 brown and two black modules. The same is done on the second side of the rooster. Wings and abdomen will be assembled separately from each other.

We start collecting the abdomen. Alternately alternate the amount of yellow modules (six, then five). In the twenty-first row we have four yellow modules, and then their number decreases with each near one. The belly is already ready.

Now it approached the wings. In the fifteenth row, we recruit two orange, one brown and a couple of black modules. In the following two layers we remove one black module. We will work in pairs, that is, we do one action in two rows. In 16 and 17, do not take black modules, and in the following two only orange blanks are typing. In 22 and 23 rows there is only one orange module. According to this scheme, we recruit the second wing.

For each free corner (except the first) put on the black module.

Give wings and abdomen the necessary form And sample.

It is also necessary to put on the back of black modules for each empty corner.

After that, we make a number of five modules (the tail will be glued between their corners).

The next step will need to do neck. To do this, score five yellow modules, to the fourth row, their number grows on one in each layer. In the fifth row, we recruit along the edges of one black module, and in the middle of seven yellow. Up to 11 rows we reduce the number of yellow modules and increase the number of black, but from the eighth row we make four black blanks at the edges. In the twelfth layer, we recruit 8 black modules, reduce the amount per one with each number.

We give the shape, wound and scrub the glue from the inside of the product.

Tightly fold and glue the neck.

After a complete drying of the details, the neck no longer collapse.

Add a pair of black modules for inclination.

And then we wear two large modules.

Then we need to make a scallop and a beard for a rooster. For the beard we take two red modules and stick them between the corners of black large modules. Then take five red modules and glue them as shown in the photo. The beak for the rooster is also made of the module, the size of which is two times less than 1/64. Combining centers, glue all the details.

The next photo shows how the legs for the cock are collected.

After we did, glue the details of the fence, turn the corners and glue the corners in pairwise. As a result, we had three fingers. Then glue all the details between themselves and add one more finger from behind.