How to tie hair ribbon bows. Golden ways to tie a bow. Bow for discharge from the hospital

15.04.2019

A bow is a universal and favorite decoration for girls of all ages. young fashionista with white bows will look bright and festive, and an elegant bow on the back of the head will give business image young woman has a special veil. Tired of standard hairstyles? Then it's time to arm yourself with ribbons, our instructions and inspiration.

regular bow

This is the easiest way, but even it will help create a stylish look:

We take a ribbon of any color and texture - satin, nylon or corrugated, the length does not matter.
We comb the curls and tighten them with a tight elastic band to get beautiful tail. This is the basis for our hairstyle
We take the ribbon we like, wrap it several times around the base of the hairstyle.
Fasten the tape firmly single knot. We take the tips, fold them in half, and then we tie them together. The free ends are slightly pulled down. We straighten it - and an elegant, albeit simple, bow is ready.

double knot

For this method, it is better not to take satin ribbons: they are smooth and slippery, they hold very poorly double knots. Give preference to a nylon accessory. By the way, we need a long tape. Getting Started:

We make the base in the same way as in the previous version - we tie ponytail. If desired, you can not collect all the hair, but only upper part, as for the Malvinka hairstyle.
We tie the ribbon with a simple single knot, and then we tie a regular bow. Attention: somewhere half the length of the tape should hang freely
Take the ends of the ribbon and tie them together again. So, we got two bows, one on top of the other.

triple length

Such a bow is also very simple in execution, but it looks more magnificent and elegant:

We take a beautiful and always long ribbon.
We collect our curls in a tight tail.
We wrap the ribbon around the base of the tail and tie a tight single knot so that one end of the ribbon is about three times longer than the other.
Bend the loose ends in half and tie a simple bow.
Again, fold the long end in half and tie it with the short one.
We fix our creation.

Braid with a bow

The braid can be decorated with a bow by simply tying a ribbon over the elastic, but you can also weave it into your hair. This option is more reliable and elegant. We take a tape at least a meter long. If the hair is short, we prefer braid:

Weave an ordinary braid, but not to the end.
We bend the tape in half and place the fold under the middle strand, and connect the ends with the extreme ones. Imagine that ribbons have become part of your hair.
When a few centimeters remain to the end, we tie the ribbons with a single knot and tie any bow you like.

Assembled bow

The assembled bow requires a little more effort than the previous options. You will need not only manual dexterity, but also a needle and thread. But it can be used many times. We act:

We take a corrugated or smooth tape.
We skip along its entire length strong thread and just pull it off.
We sew the resulting miracle to an elastic band in tone.
We decorate any hairstyle with an elastic band with a bow!

Girls like to feel like princesses, but what makes a girly girl the most princess? Nice dress with frills and, of course, magical hairstyles with bows. Learning how to tie a bow in your hair is easy. The most important thing is to train in advance before the X-hour, in order to be fully equipped by the crucial moment and avoid pitfalls. The easiest way to tie a bow is suitable for both long and short girlish hair. To do this, you will need a pre-purchased, factory-shaped bow (two are possible if the hairstyle is planned to be symmetrically tailed; only two are the same), thin hair ties and a comb.

Comb your hair gently, collect in a ponytail. If the bow is one - the tail is on the back of the head. If two, then through a straight parting on the sides. Carefully (carefully at the same time!) Fasten the tail with a thin elastic band, and attach an elastic band with a bow on top. If necessary, the base of the bow is fixed with invisibility (you need to stab from the center of the tail towards the head, as if with divergent rays). Comb the remaining ponytail. If the hair is long, you can braid the braid, fix the end of it with an ordinary thin rubber band and attach a factory-made bow on top. This is the easiest way to tie a bow on your head!

When a girl has long hair, for bows, you can use purchased long ribbons, beautifully weaving them into a braid, and tying the ends of the ribbons with a lush bow. But already independently. Getting started is the same: carefully and gently comb your hair. If you need two braids - the hair is divided into parting, the braids are woven in turn. The "waiting" side is best fixed with a wide elastic band so that the hair does not get tangled during the weaving process. The base of the braid is fixed with a thin elastic band, under which ribbons are carefully inserted. The scheme of weaving into two ribbons: the total bundle (hair + ribbons) is divided into three strands, as for weaving regular braid, ribbons are inserted into the side strands. Next, a braid is woven (alternately shift strands from side to center) of the desired length.

Upon completion of weaving, the hair is fixed with the same ribbons (the length of the ribbons should be at least twice the length of the hair), wrapping around the “tail”, tying a thin but dense one! - knot after each winding. Having thoroughly fixed the braid, a bow is formed from the remaining length of the ribbons: the ends are folded in half in length, with these "loops" a bow is made, like on laces, tightened to half. Further, with the same "loops" it is necessary to tie all the ribbons together, gradually folding beautiful curls from the long ends. A little skill - and everything will definitely work out! When weaving a braid into two ribbons (in one braid), it should be noted that it will turn out to be somewhat skewed, because from three parts one will necessarily be thinner than the other two.

To avoid such a bias (and at the same time braid an even more voluminous, chic bow), they use not two, but three ribbons at once. The beginning is the same: the base of the braid is fixed with a thin elastic band, under which three ribbons must be slipped. Now there is one ribbon for each part of the braid, so all the strands are the same. A braid of the required length is woven, after which the ends are also wrapped with two (!) Ribbons, and one more remains inoperative. It will be a little more difficult to tie a bow of three ribbons than of two, since each ribbon bent in a loop will need to be tied up in turn with the rest. The principle is the same, but the hassle is a little more. However, the result is absolutely amazing, so you can be patient.

The main nuances of creating tails, braids and tying bows: to create neat hairstyle the initial tail is best collected without falling out strands (the so-called "roosters"), because it will be impossible to get rid of them further. If some small "roosters" nevertheless turned out, they can be combed with a frequent comb towards the tail (with rays towards the center) and grabbed at the very tail with invisible ones. When tying two bows - symmetrically to each other - or two braids, you will have to make sure that the initial tails are at the same level both relative to each other and in relation to the ears, nape, parting and the child as a whole. Tails at different levels look terrible - unless, of course, this is the author's original idea.

When reinforcing ribbons in the tail, it is better to use following method. The tape is pushed through not with a cut, but with the end folded in half (about 3-5 cm), and the short tip is neatly hidden among the total mass of the beam. This trick is done in order to reduce the likelihood of the ribbon slipping out of the braid, and also to camouflage an ugly cut (otherwise it will most likely stick out over the elastic). If an unfortunate nuisance happened, the case can be saved by decorative wide "fabric" elastic bands, which are imposed right on top of the beginning of the braid, at the base of the head. In this case, the main thing is to choose ribbons and elastic bands in advance so that they harmonize with each other.

Do beautiful bow from satin or nylon tape Just. You can decorate a gift, a piece of clothing or an interior with such an accessory.

In the arsenal of every woman there are secrets and tricks that make our lives easier and more beautiful.
Ribbon bows and other materials can add festive mood and complement the outfit, hairstyle, gift set, table setting and other interior items and clothing
Many women think that it is difficult to make a beautiful bow on their own.
But this is not so, all people can create a beautiful masterpiece
One has only to prepare the materials and you can proceed to this interesting look needlework

Previously, bows and long ribbons were woven into braids for girls. Currently, first-graders are attached ready-made puffy bows made of satin or nylon ribbons.

How to make a simple beautiful ribbon bow with your own hands? The simplest and beautiful bow obtained from a two-color satin ribbon.

To make such a decoration, you need to perform the following steps:

Prepare 20cm wide tape(5 cm) light shade, and 40 cm of dark-colored tape 2 or 3 cm wide
Fold the wide ribbon and glue the ends as shown.
Attach 20 cm of thin tape from above and also glue the ends. Glue them to the folded ends of the wide ribbon
Wrap the remaining 20 cm of thin tape in the middle of the resulting “sandwich” and make a loose knot
Tuck the ends of the ribbon inside the knot or leave them loose so you can tie the bow to your clothes, hair, or gift wrapping.

Here are some more ways to do simple bows:

Another way to make a simple bow can be seen in this video.

Video: How to make a BOW FROM A RIBBON of any size?

You can make a beautiful bow from a thin braid, folding its segments in the form of a figure eight, and then sewing them in the middle. The more details, the more beautiful the bow will turn out.

Important: Making a simple bow is easy. Show your imagination and in a few minutes the accessory for the holiday will be ready.

To make such a bow is simple:

Buy a ribbon of the desired width. The length depends on how magnificent the bow should be - 1 or 2 meters
Fold the tape "accordion"
Tie in the middle kapron thread. Leave the ends free so that you can tie the product to a gift or to your hair.
You can make a "sandwich" from individual glued elements, tying in the middle

Another way to make a fluffy bow. Prepare 2 meters of white ribbon and small beads.

Such a "royal" bow is made up of separate small details-bows, which are sewn to the base of white felt. To make small elements, follow these steps:

Cut the ribbon into equal lengths of 10-20 cm, depending on what size you need a bow
Fold in half, inside out.
From the bent line, at a distance of 2 cm, you should drop glue and press this place with tweezers so that the tape sticks together
When the glue dries, turn the bows inside out and make a crease at the ends.
Fasten the ends with a thread and sew to the base
You can decorate such a bow with rhinestones, gluing them to the middle or beads different colors. Everything - the product is ready

How to make such a "royal" bow can be seen in the video.

Video: Lush bow for graduation to kindergarten

Worth noting: This decoration can be worn by a daughter at graduation in kindergarten or September 1st. It will perfectly complement fluffy dress or school uniform.

Often, a bow tie needs to be matched to a suit for an adult or a child. Of course, you can buy it in the store, but not always in the assortment there is a suitable color. Therefore, you need to make such a tie yourself.

How to make a bow "butterfly" from a wide ribbon?

Follow these steps:

Prepare 20 cm of 5 cm wide tape and 18 cm of 3 cm wide tape
Fold the pieces in half and glue the ends. Fasten them with a needle so that the glue holds the edges well.
When the glue dries, lay one element on top of the other and make stitches with a thread in the middle
Pull the thread and fasten
In principle, this is enough, but you can tie up the seam with a thin ribbon to match. "Butterfly" is ready

Beautiful "roses" are obtained from a wide ribbon. How to make such an original bow from a wide ribbon? Everything is simple.

Follow these steps:

Wrap the tape around your hand as shown in the picture.
Make a knot and remove the product from your hand
Spread the rose petals by folding them inward
Make it all the way to the last petal
How more magnificent rose, the longer the tape should be

A bow made of a thin ribbon looks stylish and attractive on any piece of furniture or clothing. It adds sophistication and elegance. How to make a bow from a thin ribbon?

To decorate gifts holiday table and the Dior bow is often used as an accessory for clothing.

How to make a Dior bow from a thin ribbon?

To make such an accessory, follow these steps:

Prepare 1m of ribbon 1-2cm wide
It needs to be cut into pieces. different lengths. The number of these segments will depend on how lush the bow you want to make. Make the length of the turns in such a size that this bow lies along the entire length packing box the longer the coils, the more beautiful
Lay the finished turns on top of each other, gradually reducing the size of each turn.
The last turn should be no more than 1 cm in diameter
Fasten the resulting bow with a thin ribbon to match, threading it into the last turn
Such an accessory can be attached to any surface: flat or round.

Sometimes you need to make many small bows from thin ribbon. This will help regular fork. Follow these steps:

Prepare a 0.6 cm wide satin ribbon and a dinner fork
Put the tape on the fork, leave the ends at least 4-5 cm
Wrap the left edge of the tape around the fork and bring it forward, pushing it between the middle teeth
Got a loop. Without tightening this loop, insert the end of the tape, but already on top of the fork between the teeth
Insert the end of the ribbon into the loop at the bottom and tighten
Remove the bow from the fork and cut off the excess ribbon around the edges.
Burn the cut ends of the ribbon with a fire (lighter or match) so that the ribbon does not crumble. You can make as many of these bows as you need - quickly and easily

More detailed instructions how to make a bow with a fork and a thin ribbon can be seen in the next video.

Video: How to make a cute bow from a satin ribbon and a regular fork in 2 minutes?

Such an elegant accessory can decorate a gift, a piece of clothing, a table setting or even hair. From a thin ribbon, an elegant and lush bow is obtained. How to make a bow from a narrow ribbon?

Follow these steps:

Prepare a narrow ribbon of two colors and cut out a circle with a diameter of 2 cm from cardboard
It is necessary to cut the tape into segments of 5-7 cm
Now, with a glue gun, apply a drop of glue to the cardboard circle and glue the edge of one of the pieces of tape. After 0.5 cm, apply a drop of glue again and glue the second end of the tape
Between the glued ends of the tape, apply glue again and glue the end of the tape of a different color. Glue its second edge next to the edge of the tape that was glued before
Repeat this until several rows of such turns are pasted. The last 2-3 rows can be done smaller, and attach a bead or rhinestones in the middle

Important: When you glue the pieces of tape, thread each end through the previous turn. Thanks to this technique, the bow will turn out lush and beautiful.

A good example of how to make such a bow can be seen in the video below.

Video: Fluffy Bow from a Narrow Satin Ribbon / Kanzashi master class

A do-it-yourself bow to decorate a hairstyle turns out to be original and beautiful. You can be sure that only you will have such a decoration.

How to make a bow for hair? Follow these steps:

Prepare 2 pieces of tape 5 cm wide and 25 cm long, and a thin tape for the middle
Take one piece of tape and fold the corner at one end
Fold the second edge also with a corner near the first folded end. Then bend the resulting corners to each other. Fasten the folded coil with a needle
Now next to the folded corners, make another turn and secure with a needle
As if turning the resulting product over, again make a corner to make a “rhombus”. Do this until there is one small triangle of tape left.
Fold the diamond in half, and in half again. Now you need to "corner" fold the remaining edge of the tape. It turned out a triangle
Hold it by the center so that everything we folded does not open. Remove all needles
Bend the inner triangle to the center to get the original "petal"
Fasten with a needle and thread where you hold your fingers
You need to make two such details.
Sew these parts and tie in the middle with a thin ribbon
Sew this bow to an elastic band or glue it to a hairpin and you have a unique hair accessory.

Detailed instructions are in the video, thanks to which it will be easier for you to make a beautiful hair bow.

Video: MK - how to make a HAIR BOW from a satin ribbon?

If your daughter is going to first grade, then she should have the most beautiful and lush bows. How to make a bow from nylon ribbon?

It is easy to make a magnificent and beautiful bow. If the store did not have a ribbon of the width you need, you can use an organza cut instead.

To make a bow, follow these steps:

Prepare two ribbons 7.5 cm wide and 140 cm long
Fold it in half lengthwise. Now string the folded edge onto a thread with a needle
When the entire tape is sewn, pull the thread until the strip turns into a product 40 cm long
Fasten the thread and straighten the product along the entire length
Do the same with the second tape.
Cut a circle out of felt or heavy tape, 7.5 cm in diameter.
Make two holes in the circle, and insert a thin ribbon or ribbon into them to match the bow
Apply glue to the edge of the base and stick the first gathered tape
We continue to coat the base with glue and glue the tape in a spiral. When the first tape is finished, continue to stick the second tape in this way.
When there is a little space left on the base, cut off the excess tape and fasten the thread.
Stick the entire tape, smearing the base in the middle. Do not forget to burn the edges of the tape so that it does not crumble.

See how to do it in the video.

Video: Lush organza bow. Master Class

Making a paper bow in stages:

Prepare 12 pieces of ribbon 2 cm wide and 25 cm long, and one 5 cm long ribbon for the middle
Begin to fold large sections of the "eight", as shown in the figure. The edges can be stapled or glued with hot glue. Fasten a small ribbon to make a ring
When all the details are ready, start assembling the bow, beautifully arranging the coils and gluing them together
The smallest coil is glued in the middle
WITH reverse side, using a stapler, attach a thin ribbon or the same ribbon that was used to create a bow

A master class for making such an accessory can be seen in the video.

Video: Do-it-yourself gift BOW from PAPER

You can make a paper bow in a different way, as shown below.

In this method, the tape is not cut into segments, but is folded into "eights" into a single structure. In the middle, the flower is tied with a thin paper ribbon.

When a newborn is an important event and everything must be perfect. Therefore, you can make a bow for a newborn envelope with your own hands. How to make a bow from a ribbon for an extract?

Tip: Choose a beautiful ribbon, for example, with golden edges, so that the flower turns out to be elegant.

Implementation step by step:

Make cuts from pink or blue satin ribbon, ribbon with gold edges in the same colors, regular thin satin ribbon, and patterned ribbon.
Start collecting a flower with a segment from a wide satin ribbon. Fold the ribbon in half and sew with a thread and a needle. Do the same with all the satin pieces, gathering them together in a circle. When finished, fasten the thread
In the same way, collect all the tapes. You should get 4 flowers
Apply hot glue to the felt base and start gluing the flowers, first large, then in descending order
In the middle, make petals from a thin braid with a pattern, first gluing the edges of the segments of this braid
The last step is gluing beads or rhinestones. Bow ready

See how the girl does it in the master class in the video below

Video: Bow for discharge from the hospital. Ribbon master class

Learning how to make such bows with your own hands is not difficult, and when there is a lot of experience, you can even make money on this type of needlework. For example, you can decorate banquet halls or create costume and hair accessories.

Video: How to Make a Ribbon Bow Flower?

Girls love to dress up, and they start doing it from the very beginning. early age. While they are small, their mothers dress them up, dress them in elegant dresses and tie bows. Tying a bow is a whole science, and mothers must master it perfectly. In this article, we will look at several ways that will make life easier for moms. So, you just have to buy bows in bulk online and continue reading the article.

Method number 1

Pleated bow. Take plain tape, firmly fix the ponytail on the head with an elastic band. Tie the ponytail with a ribbon so that one part is about half as long as the other. Fold the long part three times and tie it with the short one.

Method number 2

Secure the ponytail with an elastic band, wrap it with ribbon and tie a knot so that both ends are the same. Take a tape that can be well fixed. A nylon tape is well suited, and even better a corrugated one. Both ends of the ribbon must be folded and tied into a bow.

Method number 3

As soon as you learn how to tie ordinary bows, it's time to start shirring. It can be easily fixed in the knot area. The bow must be tied right in the middle, tightening it with sufficient force. Re-tie and tighten tightly again, being careful not to loosen the first knot. Don't forget to straighten the edges of the bow.

Method number 4

The assembled bow looks very nice. To build such a miracle on your head is not special work if you know what to do and how to do it. Take any tape, smooth or corrugated, pass a strong thread along its length and tighten it. This whole design should be carefully sewn to an elastic band that matches the color. You will get a beautiful bow with an elastic band, and you will not have to rack your brains on how to tie it better. If you collect a bow not on a thread, but on a fishing line, then it will turn out to be more beautiful and voluminous.

Method number 5

The satin ribbon does not hold the texture well, so it will not work to build a magnificent bow. It is better to make a knot on a satin ribbon only single. The long, loose ends of the ribbon look very nice.

Ribbons can not be tied into bows, but woven into braids. For these purposes, you need to take a longer tape. Weave the ribbon into the pigtail so that there are long ends, then in the opposite direction again cover the braid and tie it with a single knot.

Moms of girls need to master the science of tying bows as soon as possible in order to build stunning hairstyles for their princesses.

The ability to beautifully tie a bow on your head is a real art. A bunch of original ideas, a combination with weaving braids and the use of all kinds allow you to change hairstyles at least every day. You can choose bows, ribbons, elastic bands to match your outfit. Plus, this detail will make your image feminine and cause tenderness among others. Let's learn how to tie bows on our own.

Popular ways to tie bows in your hair

For experiments, you can take anything - bows, ribbons, elastic bands, and so on, it all depends on your imagination.

1. Pleated bow. In this method, you can use an ordinary tape. We fix the tail on the head with an elastic band, this will be the basis for further work. It is better to fasten the tail tightly so that the hairstyle does not become disheveled later, but do not overdo it. Tie your hair with a ribbon so that one part of the ribbon is half the length of the other. We fold the longer part three times, and use the short part of the ribbon to tie the folded ribbon. Now it remains to straighten the bow beautifully and enjoy the result. It is better to use a nylon tape, which will give more splendor and volume.

2. Another way: wrap the tail with a ribbon and tie a knot tightly so that two identical ends remain. Use a tape that will fix well, for example, nylon, and preferably corrugated. We fold both ends of the ribbon and tie it into a bow, then we do the same with the remaining ends of the ribbon. Straighten the loops.

3. To make a fluffy bow, take a strong matching thread and thread it through the middle of a satin or nylon ribbon. Tighten the thread well and sew the bow to the elastic suitable color. It turns out a beautifully assembled, openwork bow.

In addition, you can embed colorful ribbon in a braid, tail. Last fashion trend- Make a bow out of your own hair.

How to make a fluffy hair bow

There are a lot of options, the main thing is to constantly try and try to do everything neatly and beautifully. great way- train your skills on dolls: this way you can see the work from the side and give it an objective assessment.

So, in order to learn how to properly and beautifully tie a bow on your head, you just have to stock up on all kinds of bows and ribbons. This a great opportunity constantly, to make it unique, tender and original.