The arrow on the pants what to do. What if the arrows come out jagged? How to make arrows on trousers forever - secrets

02.05.2019

Many representatives of the stronger sex in everyday life, that is, in ordinary life try to wear jeans or pants made of a material that does not need to be ironed too often. True, there are situations when you still have to deviate from this rule. We are talking about a celebration, meeting in one or another official place or going to the theater. All of this requires the man to wear the appropriate outfit. And under the jacket there will definitely be trousers with straight arrows.

The last component of the appearance requires a lot of experience and skill, because in order to stroke and make arrows correctly, you need that experience. Perfectly straight, beautiful and austere arrows on men's trousers are the result hard work... And in order for him not to disappoint, it is necessary to properly prepare the clothes and follow the ironing steps.

Preparing products for ironing

Men's trousers are made from a wide variety of fabrics, usually on the tag located near their waist there is information about the temperature at which they are ironed. And in no case should this information be neglected. Trousers with straight and wrinkle-free arrows will surely please both the man himself and everyone around him.

Preparing for the "shooters"

Before starting ironing, you need to inspect the clothes for stains.
Iron only clean clothes, because the high temperature acts as a developer of all stains.
From the trousers, you need to remove the hairs and pile with a brush. Everything that lies there is removed from the pockets, and small rubbish is also shaken out
Ironing trousers necessarily requires a flat surface, like an ironing board or table
Several layers need to be laid thick fabric
The sole of the iron must be clean.
The ironer should be prepared, that is, small piece gauze or calico, or chintz
The front of the trousers is ironed through the ironer, which helps to avoid gloss on the clothes, and the arrows make it more visible
The ironer should be white, which will not allow the trousers to stain
The ironer is wetted before and during ironing, therefore a small container of water is required.

How should i start ironing pants?

You need to start ironing the trousers from the inside out, from the top of them. First, the belt and pockets are neatly ironed, and then the trousers. You do not need to apply too much pressure on the iron.

Advice

So that from the outside, that is, from the front side, smoothed kinks do not appear on the fabric, which is under the pockets, you can put a thin towel.

The nuances of proper ironing

After ironing, the trousers are turned inside out. And in order for the arrows to turn out to be the same on the trousers, their inner seams must be aligned with the outer ones. If the product is sewn with high quality, then the arrow coincides with their groove from the belt of the trousers.

Stages of ironing trousers

It is more convenient to iron one leg first, and then the other. A moistened cloth should be applied to the previously prepared trouser leg, after which it is already necessary to start working with an iron. The mode corresponding to the fabric is preliminarily set on it. The ironer must not be allowed to dry completely; it must be moistened from time to time. For irons with steam humidifiers, you need to set the steam generation modes. You don't need to move the iron casually to keep the arrow straight. Better to put it on the section of your trousers, hold it and then move it.

Output:

Iron the trousers so that they finally have perfect and even arrows is not particularly difficult. But, this process requires careful preparation of the product, the availability of a working iron and some practical experience.

How to iron pants after washing

How to iron trousers

They are greeted by clothes, because our appearance speaks volumes. And today I will tell you how to iron trousers with arrows - it will take you literally 2 minutes.

Preparation: what it takes for perfect shooters

How to prepare for creation perfect shooters on ? First of all, we need:

iron- it's good if he comes with a steamer;
ironing board or any other solid surface;
ironer or cotton fabric;
water in a spray bottle;
pins.

In order to properly iron the arrows, the trousers must be prepared. Here are some tips:

Clothes must be clean... High fever will only make it worse dirty spots and divorces. Such dirt will penetrate even more into the fibers of the fabric.
Exhibit correct temperature iron... It depends on the type of fabric. Remember that cotton and wool items can be processed on high temperature, but synthetic pants - only low. Optimal temperature regime indicated on the tag that is sewn to the garment.

White gauze or cloth... Only this color will not leave streaks on the fabric and will not stain trousers.
Iron pants inside out... This technique will not leave shiny lines from a hot iron.
Water. If the iron does not have a steaming function, then prepare a bottle of water with a spray. When ironing your trousers, you will need to wet the fabric.
Clean iron surface... If there is dirt on the operating panel, first clean the device.

Smooth surface... Ironing is necessary only on a perfectly flat and firm surface. The ironing board possesses these properties. If it is not there, then you can iron, for example, on a table covered with a thick blanket.

Getting Started: 11 Steps to Make Your Pants Arrows

So, we are all set! Let's start ironing and creating arrows.

Minute 1. Ironing trousers

To make arrows beautifully and correctly, you need to understand how to iron trousers in principle. What will look like if you iron the arrows, and the rest is rumpled?

Standard ironing, in particular of trousers, is usually done according to the following rules:

	Step 1 We turn the trousers over to the wrong side.
	Step 2 Ironing the pockets . This way we will avoid wrinkling. So that folds from pockets do not show through on front side, put a towel under them.
	Step 3 Smoothing out the belt and lining - the upper part also needs to be given due attention.
	Step 4 We turn the clothes out onto the front side. We begin to iron from the top. There are many seams there. So that they do not appear on the other hand, we put a soft pad inside the pants, and from the outside we cover it with an iron (or a piece of cloth made of cotton material).
	Step 5 Place the trousers on an ironing board or hard surface so that the inner seams overlap. Iron the trousers without touching the arrows.
	Step 6 Iron each leg in turn, putting a cloth moistened with water on it. If the iron has a steaming function, then we still periodically spray the iron with water.

Minute 2. Making arrows

Now let's look at how to make arrows on trousers with an iron:

	Step 7 We fold the pants down to side seams coincided with the internal ones. The arrow should line up with the groove from the waistband of the trousers.
	Step 8 To prevent the folded structure from shifting, we fix the legs along the top and bottom with pins or needles. In the photo there is a "modern" version of fastening - stationery clamps.
	Step 9 On top we place an iron or cotton cloth moistened with water. This is how we protect the fabric from high temperatures.
	Step 10 We select the temperature regime and proceed to ironing. If there is no experience in this matter, it is better to iron each leg separately.
	Step 11 To prevent the trousers from shifting and the arrows to be even, I recommend that you do not move the iron back and forth, but simply apply it for a few seconds.
	Result!

Models of men's trousers are different. Pants with one groove are popular now, but there are also those that have two. I will give a little advice on how to iron trousers with arrows, if there are two of them:

First, we proceed to the right tuft-tuft and iron it;
Then we move on to the one that is closer to the codpiece;
Then we work with arrows.

Extending the life of shooters

After the trousers and hands have been ironed, the first wash will “kill” all the work. To keep the labor on long time, you need not only to know how to iron trousers with arrows, but also how to save.

To extend the life of the shooter, use folk remedies, the price of which is a penny.

Means 1. Soap

Take a piece laundry soap or a remnant and draw it from the seamy side along the arrows.
After that, it remains only to iron the female or men's trousers from the front side.

Means 2. Starch

Those places in which the arrows do not stick well can be greased with starch paste. We are waiting for this mixture to dry completely, and only then iron the front side.

Remedy 3. Vinegar

Prepare a solution of vinegar and water. We take 1 tablespoon of vinegar and dilute it in 1 liter of water.
In this solution we moisten cotton fabric. We place it on the trousers and iron it.
I do not recommend wearing trousers after ironing. Let them cool for 5-7 minutes, so they will not wrinkle longer.
If you iron in advance, then you should store it either in a closet on a hanger, hanging it out, not folding it.

We have already learned how to make beautiful and straight arrows with our own hands. But here are a few more necessary and useful tips to make your things last for many years:

If the fabric in the knee area is stretched, then we pay attention to it first. With the help of a damp cloth and tangential movements, we return old form, and then iron it.

For dry places use vinegar solution... The instruction is as follows: moisten a clean cloth in the solution and go over our trousers. This method is suitable for dark colored trousers. For light - we use a 2% solution of hydrogen peroxide. Spray on dry places and let dry, then rinse in water.
For trousers made from natural fabrics: I advise you to sew the arrows with a thread before washing. So they will not disperse. After that we iron in the usual way.

Output

From the article you learned how to start ironing trousers with arrows and how to do it correctly in 2 minutes. Also revealed are the secrets of how to prolong the life of shooters. Now your task is to use the knowledge gained and get down to business!

For more information, watch the video in this article. If you have any tips or questions - ask in the comments.

People go to work or put on business meetings classic pants where arrows are present. The latter should always be perfectly flat and straight, otherwise the person will look careless. Ironing the arrows correctly takes experience that comes with time.

How to make arrows on trousers with a steamer - tips.

How to make arrows on trousers with an iron?

A woman should be able to iron her man's pants. Before starting the process, read on the label what type of fabric they are made of. Then set the iron to the correct ironing mode. Now you need to perform the following procedure.

1. Start ironing the trousers from the wrong side. Pay attention to the pockets and waistband with a thin towel. This way, unnecessary creases can be avoided.

2. Turn the pants right over. Align the inside and outside seams. Start ironing the arrows on one leg and then move on to the other.

3. Apply a dampened cloth to the pant leg and spray it periodically with water. Take the iron and put it on the arrow, holding for 2-3 seconds.

4. Move it gradually from bottom to top. So the arrow will be completely ironed and not knocked down. As a result, it should turn out to be even along the entire length.

Pretty arrows will not come out right away. This will take a lot of time and effort. However, then, when the knack comes, the whole process will take only 5-10 minutes.

How to make arrows on women's trousers with an iron correctly?

How to make arrows on trousers forever - secrets

It will be useful for housewives to know how to make arrows more durable. This will give women the opportunity to spend their time on other useful things or to relax.

· Moisten the iron through which the item is ironed in vinegar water. It prevents the appearance shiny spots.

· Before ironing, swipe a sharp bar of laundry soap over the wrong side of the arrows. They will get tough.

The characteristic fold on women's and men's trousers, called an arrow, is by no means a new trend. It appeared at the beginning of the 19th century, one might say quite by accident. However, it does not lose its relevance to this day.

Do you need arrows on your trousers?

Today women's pants with arrows is an integral part of the wardrobe of a business lady and a real fashionista. it optimal solution for women who are aspiring and presentable. In addition, the arrows visually make the silhouette slimmer, and the legs longer. And putting on straight women's trousers with arrows with shoes on high heels, the question of whether arrows are needed disappears by itself. They go well with blazers, vests, classic white shirts or chiffon blouses. Trousers with arrows do not limit their owner in the choice of accessories: belts, suspenders, ties - can become a great addition strict business image.

What trousers do you need arrows on?

In the classical sense, arrows are required attribute trousers straight cut... Of course, on jeans and harem pants, a vertical fold along the entire length will not be entirely appropriate.

But, nevertheless, the arrow can be present on bell trousers, which fit tightly at the waist and hips, but are flared from the hip. Look interesting tight pants with arrows on young and slender girls... But the ladies with curvaceous it is better to refuse such a model. The piping trousers with an arrow are perfect for an evening event or a business meeting.

Complement the image business woman and wide pants with a characteristic fold. The only one who is better off refraining from such an acquisition is petite young ladies with a height below average.

There are arrows on cropped trousers. it great option for those who want to refresh their familiar, everyday and austere image.

Typically for business suit trousers with arrows are sewn from dense fabrics, restrained colors and unpretentious cut. And for those who want something original, the designers offer modern interpretation classics - straight trousers with arrows in bright and flashy shades.

Trousers with arrows - an integral part men's wardrobe... Although women do not leave them unattended and wear them with pleasure. For you to feel confident and tidy, the fold should not "roll." It is not difficult to achieve this, it is enough to know how to iron trousers with arrows.

In many companies, employees are required to adhere to a dress code and wear suits. It is customary to wear them for business meetings, negotiations and other official events. Strict clothing makes the image elegant and high-profile. But in order to look neat, you need to carefully look after things, otherwise an expensive suit will turn into a wrinkled and unsightly attire.

Who introduced this fashion?

Arrows appeared in the 19th century when ready-made clothes from warehouses was transported to large volumes... The things were packed so tightly that it was almost impossible to smooth out the folds on the pants. Therefore, men wore trousers with arrows - this emphasized their novelty. Thus, the problem disappeared and a new fashion trend emerged.

Preparation

Before ironing men's trousers, be sure to check for stains or dried dirt. Sometimes dirt remains after washing and can be almost invisible. If you have a pet at home, you should completely clean the trousers from wool. To do this, you can use a special brush.

In the case when the item is ironed for the first time, you need to carefully study the information on the label. As a rule, manufacturers attach it to the inside of the belt at the back. In order not to damage the fabric, it is necessary to set the required temperature values on the iron.

Before ironing trousers with arrows, you must first prepare them. Perhaps the first time the procedure will seem a little complicated, since this requires skill.

First of all, the thing should be carefully ironed. It is better to turn the trousers inside out so that the surface does not shine. Special attention worth giving to the belt and pockets. Sometimes traces of all ironing efforts are visible on the outside. To prevent this from happening, you can put paper in your pockets and spread a towel. When top part processed, you need to carefully walk the iron on the legs, without smoothing the arrows and seams.

Soapy solution with vinegar

There are several ways to iron arrow trousers. Many housewives choose the most proven, using a soapy solution with vinegar. You will need a damp cloth to steam the arrows. To make the arrows durable and not "crawl", you need to add a little vinegar to a liter of soapy water. But it is worth using this method only when there is already a certain experience, and the arrows turn out to be beautiful and even. After applying the solution, the result will be securely fixed, and it will be possible to change something only by washing the product.

So how do you iron your pants properly? They need to be taken by the bottom and folded. inner seam with the outside. If the item is of high quality, the fold should fit exactly into the dart. In this position, the trousers must be placed on ironing board... Iron the fold very carefully so as not to move the fabric. The front of the leg is processed first, and then the back.

Fundamental rules

Many novice hostesses cannot understand how to iron trousers with arrows, because they fold the trousers separately. It is much more convenient to lay them together and iron them on both sides. If you run the iron in the direction of the arrow, there is a high probability that the fabric will move.

Pants made of dense material require more thorough steaming. It is advisable not to put on the item immediately after ironing, it is better to hang it folded for a while. This will help the arrow to hold better.

Alternate ironing

When the trousers are folded with seams and well ironed, it is necessary to bend the pant leg lying on top. The other should be carefully aligned to step seam coincided with the side. If your iron is not equipped with a steam function, you can use the plain water... They do not need to move, just put the arrows at the beginning and wait a little. Then move along the entire length of the leg. After that, it is necessary to process the inside of the other leg in the same way. It is very important to make sure that the fabric does not move, otherwise the arrows will be crooked. Some housewives neatly pin the fabric with pins for convenience.

When the pant legs are finished individually, they need to be folded together and ironed again, pressing down on the iron well. By following these tips and knowing how to iron your trousers properly, you can achieve a flawless and neat look.

Home secrets

In order not to print a trace from the iron, it is better to iron the legs through the iron and put a special pad inside. Soap solution- a reliable retainer, but it must be used with caution: sometimes it leaves streaks on the fabric.

Before ironing the arrows on the trousers, you can run a piece of soap dipped in water over them from the seamy side. And only after that start ironing through a damp cloth. It is imperative to let the product dry so that the folds are even and do not "ride".

Classic trousers with arrows are worn by both men and women, so the knowledge of how to iron them correctly will be useful to everyone, without exception. Everyone can make an even fold on the legs, you just need to practice a little. Follow all instructions and recommendations and your look will always be flawless.